eChapters

Introduction

From earlier chapters, it is evident that Lactobacilli and Bifidobacteria are the two important genera that have potent applications in food microbiology and human nutrition due to their role in food and feed production, preservation and also due to probiotic potentialities. Most of the bacterial species are still unknown indicating that the identification and classification of bacteria is a hard task since the beginning of microbiology and consequently our knowledge about bacterial ecology is very low. Mean while the expectations about novel bacterial products are high. Therefore, bacterial identification has become a growing field of interest in microbiology. Since, Lactobacilli and Bifidobacteria genera include a large number of species and strains exhibiting important properties in an applied context, chiefly in the area of probiotics as food and therapeutics, an updated list of species belonging to these two genera, their phylogenetic relationships and other relevant taxonomic information are of great significance. The classification and identification of a probiotic isolate at strain level point out its typical habitat and origin. Moreover, the species, or genus name, may also indicates the strain’s safety and technical applicability for its use in probiotic products. Taxonomy helps to place a newly identified organism in a relevant group and enables the scientific communication. Further it facilitates the construction of databases that can be used for rapid identification of organisms at laboratory level easily. Thus, taxonomy of Lactobacilli and Bifidobacteria helps to study these organisms scientifically and allows characterizing and arranging them in an orderly manner which promote the scientific community to explore the benefits from those organisms for the betterment of mankind.

1. Technical Feasibility of Dairy Unit

This includes following information such as
 
    1.    Availability of good quality animals in nearby dairy market,
 
    2.    Availability of good grazing grounds and lands,
 
    3.    Availability of green/dry fodder,
 
    4.    Availability of concentrate feed, medicines etc.
 
    5.    Further availability of veterinary aid, dairy breeding (AI) centre, milk collection and marketing centre are also important.

    6.    Nearness of the selected area to veterinary/breeding/milk collection centre and the financing bank’s branch.

    7.    Capability of the owner and employees such as technical knowledge and skill.

Food Business Regulatory System in India

In India Food Businesses are regulated by only One authority i.e. Food Safety and Standards Authority of India (FSSAI). This comes under the control of Ministry of Health and Family Welfare of the Govt. of India.

FSSAI – Food Safety and Standards Authority of India

The FSSAI or Food Safety and Standards Authority of India was incorporated under the Food Safety and Standards Act (FSSA) of 2006. It consolidated various acts & orders that were previously applicable and used to handle food related issues in different Ministries and Departments. The basic objective of formulating FSSAI has been to lay down science-based standards for items of food and to regulate their manufacture, storage, sale, distribution, and import to ensure the availability of adulteration-free and wholesome food for human consumption.

Interest Rate : Provisional Interest rate @ 14.50% p.a. has been taken for evaluation of the project report. However, the sanctioning authority may consider the exact rate of interest applicable, on the date of sanction. Development of farm should be completed within 3 months from first disbursement.
 
Repayment of loan : A five-year repayment programme has been drawn with six months moratorium period, the installments will be monthly starting from 6th month onwards. The applicant has to make tie-up with the local MPCS and the repayment should be routed through the MPCS.

Interest Rate: Provisional Interest rate @ 15.75% p.a. has been taken for evaluation of the project report. However, the exact interest rate will be decided by the sanctioning authority on the date of sanction.

Disbursement of loan: Funds for fodder cultivation and civil construction should be disbursed first. Development of sheds and fodder plots should be completed within 3 months from first disbursement. Then disbursement of 1^st Batch cow (10 animals) will be done. Last disbursement for 2^nd Batch cows (10 animals) should be done after 5-6 months of purchase of 1^st batch cows.

Insurance: The animals and other assets (sheds, equipment) must be insured. Wherever necessary, Risk / Mortality fund may be considered in lieu of dairy insurance.

India is the largest producer of pulses and contributes around 25% of total global pulse production. In addition, it is also world’s biggest consumer (27% of world consumption) and importer (14%) of pulses in the world. Pulses account for around 20 per cent of the area under food grains and contribute around 7-10 per cent of the total food grains production in India. Though, pulses are grown in both Kharif and Rabi seasons, Rabi pulses contribute more than 60 per cent of the total production. Gram is the most dominant pulse having a share of around 40 per cent in the total production followed by tur/arhar at 15 to 20 per cent and urad and moong at around 8-10 per cent each. Madhya Pradesh, Maharashtra, Rajasthan, Uttar Pradesh and Karnataka are the top five pulses producing states in India. Considering the nutritional importance of pulses and its products in Indian diet, the production and availability are not sufficient. Since independence, grain production has grown dramatically but pulses production and its availability have declined. On the other hand, the per capita availability of cereal and millets has increased in spite of a four-fold increase in population. The consumption ratio of cereal-to-pulse has risen from 6:1 to 12:1.

Pulse processing is the major need of developing nations as it is the most acceptable and cheap source of protein and hence can help combating Protein Energy Malnutrition (PEM). In addition, the identification and recognition of various newer and improved processing methods can provide the basis for further development of legume processing industry. Traditionally, home cooking is applied for consumption of pulses since ages. Modernization has no doubt created a lot of ease and developed various techniques to make different edible forms of legumes/pulses. Many advancements have been happened in traditional processing methods (milling, fermentation, roasting, boiling, steaming etc). and resulted into new products. Improved techniques for efficient milling of legumes into dhal (dehusked splits) are an important area of investigation. A systematic method that eliminates wastes and losses has great significance in the Indian dietary pattern. New systems for processing legumes come under several main categories, namely, improved decortications and milling techniques; quick-cooking pulses; canned pulses; pulse flakes, expanded snack foods etc. Such new and innovative processing technologies presented in this chapter can be applied and used in developing nations. Present chapter will discuss both traditional and non-traditional means of pulse processing.

Nano-technology refers to technology on a nano- meter scale, specifically less than 100 nano-meters. The novel nano-particles are tiny spheres (fullerenes) or tubes (nanotubes) made from carbon atoms. It facilitates the development of future inventions transversely a vast array of fields. New nano-particles are being made of silicon, ceramic, polymers or even natural ingredients that break down in the body. The characteristics that make these particles functional in the food industry include optical properties, reactivity to temperature, and biodegradability. They can be used as probes or filled with flavorings or nutrients for delivery. Highlights on the categorisation of agriculture with nano- food technology and nutrition are given in Fig 1.

There are three key elements in nano-technology. They are: (1) substances at nano-scale exhibit novel physical and chemical phenomena with novel functions (2) allowing to measure, control and operate material at the nano-scale that transform them to functions. (3) allowing the union of nano scales of materials for exceptional properties.

Introduction

The farm to fork approach utilizes agricultural products as raw material for processing by industries to obtained value-added products (Mijinyawa et al., 2007). Processing that transforms animal, vegetable, or marine materials into value-added food products for consumers and forms an integral part of agriculture for storage or size reduction into fine particles. One of the major problems associated with processing is the unavailability of processing facilities including appropriate engineering materials for the transformation of agro-based produce into different forms (Ogwuagwu, 2007). This transformation process mainly includes operations like particle size reduction, milling or comminution, etc. utilizing different size reduction forces without making alterations in chemical properties (Enrique, 2012). This enhances the eating quality or appropriateness of foods for advance processing with a more varied range of available products.

Grains are dried small seeds with adhered or removed husks or outer layers processed for consumption (FAO, 2011). The two major types of commercial grain crops include cereals (such as millet, corn, sorghum, wheat, rye and so on) and legumes (such as beans, groundnuts and soya beans). These grain crops are subjected to a milling operation to break them into smaller pieces or more practically appropriate form. The grinding process involves the application of different mechanical forces to overcome the interior bonding forces bringing change in the state of solid grains to different desirable forms such as flour or meal (Kaul and Egbo, 1985). As a result, the physical state of these grains is modified due to a reduction in size and change of shape (Ryan and Spencer, 2008). Most of the actual milling processing that is used in various industries is based on simple operations. But now various technological progress has been initiated that involves the adoption of computer control for various milling operations to improve efficiency and quality while minimizing labor requirements. Hence, the present text highlights the various technological advancements and evaluation techniques employed in milling operations.

1. INTRODUCTION

Stone fruits belonging to family Rosaceae (sub family-Prunoideae) include several important fruit crops like peach, plum, apricot, cherries, nectarines etc. The World production of these stone fruits is approximately 45.49 million tones; out of which 39.61 million tones stone fruits are grown in Asia and India contributes 6.67 million tones of stone fruits annually. Among all the stone fruits Peach, Plum and Apricot production in world is 24.98, 12.05 and 4.11 million tones, respectively whereas India alone produces 287778, 261903 and 17862 metric tones of peach, plum and apricot, respectively (Table 1). These stone fruits are grown extensively in USA, Spain, France, Italy, Turkey, Morocco, Iran, Africa and Australia. In India, these are grown in J&K, Himachal Pradesh sub-mountainous tracts of Punjab, Uttarakhand, North East States and to the limited extent in the Nilgiris hills. Primarily, these stone fruits are used for table purposes or processed to prepare various types of value added products like jam, jelly, marmalades, preserves, baby foods, nectar, juices, squashes, concentrates, ready-to-serve beverages, wines and also processed into dried products.

1. INTRODUCTION

Vegetables occupy a prominent position in our diet especially to tone up our digestive system and provide nourishment. Regular use of vegetables, supply many essential health building and protective substances, such as vitamins and minerals. India ranks second in vegetable production in the world. The abundant production of vegetables during the season, results in a glut. Consequently, a large quantity of vegetables gets spoiled resulting in a considerable loss of natural resources. Therefore, preservation is the best way to save the wastage of vegetables and make them available even in the off-season (Plate 1).

5.1 Technology readiness levels- Introduction
Technology readiness levels (TRLs) is measurement of the maturity level of a particular technology. These are based on a scale from 1 to 9, with 9 being the most mature technology. It is a map that shows whether a given technology is in a conceptual state or can be used in real-world applications and ensures innovations are thoroughly tested before being applied on a large scale. The TRL scale uses a set of questions designed to measure progress of a technology toward maturity. They help in reducing risks and improving efficiency. TRLs were initially designed in the 1970s for use by NASA to assess how prepared a technology was for space missions. Technology for space travel is always extremely sophisticated and with a high degree of risk. NASA required a system to assess systematically whether or not a new technology was ready to implement. By breaking down development into different levels, NASA was able to provide informed decisions on which innovations were ready to incorporate (figure 12). In due course, TRL proved to be so effective that other industries began to use it. Other entities like the European Space Agency (ESA), U.S. Department of Defense (DoD), BIRAC, DRDO and many other agencies have taken , to using TRL to guide R&D strategies. TRL helps in simplifying development, decreasing risks, and maximizing resource utilization.

1. INTRODUCTION

Indians are known to prepare preserves from the ancient times. They were also familiar with ther therapeutic values associated with the preserves. Besides, candies, reathers and toffees are the other food products prepared and consumed. In this chapter, the methods of their preparation are described.

2. PRESERVES

A preserve is made from properly mature fruit, by cooking it whole or in the form of large pieces in heavy sugar syrup, till it becomes tender and transparent. In its preparation not less than 45Kg of the fruit are used for every 55Kg of sugar, and cooking is continued till a concentration of at least 68 per cent of TSS (Total Soluble Solids) is reached.

Freshly made preserves are wholesome and have an attractive appearance. When they are stored for a long period, their natural colour and flavour deteriorates on account of oxidative changes. They should therefore, be made only during the season, unless there should be adequate facilities to keep the fruits so that they are available in the off-season also.

The word biscuit drives from Danisbiscoctus which is the Latin word used for twice-cooked bread in Britain and refers to bread rusks made for sailors (ship biscuits) as long as the Middle Ages. Biscuits are thin, flat, baked and crisp items made comprising flour, sugar and fat as the key ingredients. These usually have a moisture content of less than 4% and have a long shelf life, maybe six months or more, when packed in moisture-proof containers. They may be a part of routine diets, sweets, luxury gifts, nutritional items, baby foods, pet foods, chocolates and creams added, etc. The appearance and eating qualities determine the appeal to consumers.

Bread is considered as one of the oldest processed foods to be known, traditionally prepared using wheat flour and water and baked on hot stones. The process of bread making involves hydration of protein and formation of gluten network ABSTRACT 70 Bakery and Confectionery Technology upon mixing, the evolution of carbon dioxide owing to the action of yeast on sugars and aeration of the mixture by incorporation of the gas followed by coagulation of the dough upon heating it in the oven. 

The history of cakes traces back to ancient times where Egyptians first practiced advanced baking skills. However, the modern-day cakes are said to have evolved in Europe around mid of 17th century. Today cake products and its derivatives are widely found all around the world. Cakes are sweet baked products rich in sugar, fat and egg with a tender bite and a pleasant flavour. They are basically protein foams, stabilized by gelatinized starch. Quality of cake depends on number of factors like selection of ingredients, balancing of recipe, optimum mixing and baking procedures. Good quality cakes are characterized by large volume, uniform crumb with fine cells and pore size.

Confectionery is an vital food item of great acceptance among wide range of population. It has been relished as a major food delicacy from ancient times. The term confectionery is describes a spectrum of sweet goods and takes on different meaning depending on the country in which it is used, for example in the United Kingdom the term applies to any sweet product including cakes. In the United States confectionery is candy and includes sugar confectionery and chocolate confectionery.

In the Modern era of globalisation, a wide variety of miscellaneous bakery products are available. It is hard to acknowledge all of them in this chapter due to the unlimited specialities of bakers across the world. The writing here in this chapter is limited to formulation & technology used for the production of buns, pizza base, chapatti, wafers, pretzels, crackers and muffins individually.

Introduction Millets are a group of annual grasses which are small seeded, hardy, drought tolerant, low maintenance and mainly found in semi-arid regions. The historic importance of millets can be derived from various types of traditional dishes which uses millets like roti and chapati flatbreads in India, uji (a type of porridge), injera (a fermented flatbread commonly eaten in Ethiopia) and beer in Africa, and kasha and fermented drinks in Eastern Europe. Millets are the 6th most important cereal grain in the world. India, China and Nigeria are the largest producers of millets, and the Research Institute for the Semi-Arid Tropics estimates that in Africa and Asia more than 90 million people depend on millets in their diets. There are hundreds of millet types, but the major types grown commercially are: proso millet, foxtail millet, pearl millet, Japanese barnyard millet and browntop millet. In this book chapter, we will mainly focus on two minor millets i.e., Teff and Fonio

Introduction

Test of pollen viability (extent of pollen viability) is important in pollination experiments to ensure fertility/seed setting. It is also important in monitoring state of pollens during storage in ecological/ taxonomic studies as well as during research on pollen biochemistry, genetics, stigma interactions, and incompatibility studies. Pollen viability refers to the ability of pollen to accomplish post-pollination events to achieve fertilization. Pollen viability test has gained importance particularly in plant breeding and hybrid seed production experiments/ practices. In this chapter, you will be acquainted with the basics of pollen viability test. However, for more professional knowledge on the topic readers are suggested to refer specialized books.

Pollen Viability Test

It is important to know the extent of viability of pollens used in pollination experiment, in finding fertility of a plant of interest, to monitor state of pollen on storage, in ecological/taxonomic studies, as well as in research on biochemistry, genetics, stigma interaction, incompatibility assay, etc. of pollen. Several pollen viability tests have been developed time-to-time. It is recommended to initially use different tests for a given pollen type to find out the most appropriate method that provides reliable result on pollen viability. It is important to note that every procedure requires standardization of protocol according to the sample used. Following different tests are used for assessing pollen viability.

1. In-vitro Pollen Germination Test

It is a simple, speedy, and quantitative test for assessing pollen viability. In this method, a collection/sample of pollen is germinated in vitro and observed under microscope. The percentage of germinating pollens (producing pollen tube) after appropriate treatment and a given period of time is determined. The percentage provides an index of viability of the pollen sample.

Introduction

Seed is a living entity (mature ovule) consisting of a tiny plant in embryonic stage along with the stored food protected by an outer layer known as seed coat. Seed is an important biological input in agriculture, which is economically important for successful crop husbandry. Cotyledons serve as the source of nutrients (proteins, carbohydrates, and oils) that not only nurture the plant at the early developmental (seedling) stages of plant but also the vegetarian (heterotroph) organisms. Being one of the important inputs in agriculture, viability of seed needs to be assessed to know the germination percentage of seeds used to raise a crop. Since viability of seeds may deteriorate on storage depending on the storage conditions. Therefore, often it becomes important to test viability/germinability and vigour of seeds before being used for raising a crop or conducting an experiment. In this chapter, we briefly discuss about the different methods which can be used for testing the viability of seeds.

Seed Viability

Seed viability can be defined as the capability of the seed to germinate and produce a normal seedling within a specified period. In other words, seed viability indicates how many seeds in a lot are alive and could develop into plants under appropriate field conditions. It is very important that most of the stored seeds are capable of germinating when sown in a field. They must possess higher viability at the beginning of storage and maintain it over the storage. A seed with high initial viability survives longer in storage; however, the viability deteriorates slowly at first and then rapidly as the storage prolongs. It is important to know the duration of storage after which a considerable decline in viability occurs under given storage conditions so that to take necessary action to revive the seeds. Excessive deterioration in vianility of seeds may lead to loss of the seed/material/ germplasm.

The growing chemicalization of milk presents a great challenge to the dairy industry. A number of chemical compounds get entry into milk, intentionally or un-intentionally, through their direct or indirect usage for crop, animal; or dairy husbandry practices, as environmental contamination. Several of these contaminants may be naturally present on grazing grass or use as pesticides for green fodder or they may get entry through use of compounded animal feeds. These eventually get excreted into milk as residues and pose problems to food safety. The risk of health hazards arises from veterinary drugs, residual pesticides, heavy metals, detergents and micotoxins etc. It is therefore, become necessary to detect these contaminants in order to make food safe for human consumption.

Detection of Aflatoxin M 1 in Milk

Material requirements : Glass column(30 cm x 1 cm), Silica gel (63-200 µg particle size), volumetric flasks, beakers, micro pipette, HPLC equipment fitted with C 18 column(25 cm x 4.6 mm) and fluorescence detector.

Reagents: Sodium chloride solution (400g in 1000ml water), acetonitrile/water mixture (25:75), sodium sulphsate, chloroform, toluene/acetic acid mixture (9:1), acetonitrile/diethyle ether/hexane mixture (1:3:6), chloroform/acetone mixture (8:2), n-hexane and aflatoxin standard ampule.

Preparation of stock solution : Transfer contents from 2.5ml or 0.5ml ampoule, quantitatively, to 25ml or 50ml volumetric flask respectively. Rinse ampoule with small quantities of chloroform and collect rinsing into flask. Makeup the volume with chloroform, mix well and store at 5º C or below. These solutions will contain 1 µg per ml aflatoxin M1.

Working solution : Transfer 0.5ml of stock solution to a 10ml conical flask. Evaporate contents to dryness using inert gas. Dissolve residue in 10ml of acetonitrile/water mixture. Prepare series of dilutions containing 0.0025, 0.005, 0.01 and 0.025 µg/ml aflatoxin. Similarly treat 5ml of stock solution to give a concentration of 0.5 µg/ml.

Introduction

Preceding chapters discuss the essentials of probiotics, their role in maintaining gut health in combination with prebiotics and significance of systematic classification of probiotic isolates. Further, to draw an idea how probiotics function in the gut, it is essential to know the interaction of probiotics with other microorganisms in the gastrointestinal milieu - the site of their probiotic action. Knowledge in the ecology of probiotic microorganisms in host environment such as gut gives an ideal picture of their functioning manner and the factors (both host and microbial) responsible for it.

Study of microbial ecology in the gastrointestinal tract is very difficult since gut harbors highly diversified microflora that varies not only at species level but also at individual level. The diversity of gut microflora in two healthy individuals of same species may exhibit variations in their composition and it may be influenced by geodemographic factors also. In this regard, the present chapter deals with the study of ecology of Lactobacillus- most commonly used probiotic bacteria in the gastrointestinal tract which in turn helps in framing selection criteria for screening of potential probiotics.

Recent studies on interaction between human and gut microflora discussed that co-evolution between microorganisms and their host have contributed for the development of a very complex microbial diversity in the gut. Highly diversified microflora in the human gut is a consequence of natural selection at two levels, top-down and bottom-up selection pressure. Hierarchy theory expounds that higher levels compel lower levels for possible organizational solutions i. e. organisms at the higher levels govern the structure or population dynamics of an ecosystem while on contrary lower levels control the structure of ecology when bottom-up level is the selection pressure. In case of interaction between human and gut microflora, being host human is at higher level in the hierarchy for selection and as mentioned above, top down selection pressure is driven by higher levels; host selects the beneficial microorganisms for functional redundancy leading to the development of a microbial community with divergent microbial divisions. Chances for lateral gene transfer also thought to influence the selection process and there by structure of the microbial community. On the other hand, competition among the members of host selected microbiota exert bottom up selection pressure resulting in the development of highly specialized genomes with functionally prominent set of genes. Natural selection at host level obviously favors functionally constant microbial communities which benefits the host with functional redundancy encoded in their genomes. Mean while bottom-up cell-level selection pressure aspire to favor niche specialization to avoid competition between the members of microbial community. In order to be a part of specialized niche, to become more potent microorganisms adapt a particular set of abiotic and biotic factors within the habitat by acquiring new sets of genes essential for their survival and thus escape the competition from decrepit microbial species.

Ice cream is a complex multiphase food system in which fat, proteins, sugars, water, air, ice crystals, and stabilizers interact to determine its structure and eating quality. This chapter introduces the scientific principles governing ice cream composition, microstructure, freezing behaviour, and processing. It explains freezing-point depression, ice-crystal formation, colloidal behaviour, foam development, and structural changes during processing. Particular attention is given to the relationship between microscopic structure and sensory properties such as smoothness, creaminess, body, and meltdown. By connecting food chemistry with processing technology, the chapter establishes the scientific foundation required to understand formulation, manufacturing performance, quality control, and product stability.

Packaging is not only an integral part of product presentation but also plays a vital role in preserving food quality and extending its shelf life. In a world where food must travel vast distances from producers to consumers, often across varying climates and storage conditions, effective packaging is essential. It serves multiple functions, from protecting food against physical, chemical, and biological hazards to providing a medium for branding, regulatory compliance, and consumer convenience. This chapter explores the fundamental need for packaging in the food industry, emphasizing how packaging contributes to the safety, longevity, and accessibility of food products. By examining the protection, preservation, distribution, and sustainability aspects of packaging, this chapter highlights its significance in modern food production and distribution systems. 2.1. Protection, Preservation

Synopsis

If the human being was born first, he or she needed food immediately to survive. Thereafter, human beings continued to need food and continued to eat food throughout his or her life. Hence, the relationship between human being and food is permanent and the requirement of food for the human being to be alive is everlasting. The paper provides the background, definition of right to food, and adequate food, historical events, legal perspectives, operational guidelines, and advances in its application and derives conclusion.

1. The Stability and Shelf-Life of Food

    1.    In the UK, the date coding to be used is determined by the total life of the product: for microbiologically highly perishable foods, a ‘use by’ date is needed, while for other foods, including foods with more than 18 months’ shelf-life, a ‘best before’ or a ‘best before end’ date is needed.

    2.    IFT (1974) definition of shelf-life, is : The period between manufacture and retail purchase of a food product during which the product is of satisfactory quality.

    3.    Shelf-life is defined as the time during which the food product will :

        i.    remain safe;
        ii.    be certain to retain desired sensory, chemical, physical and 
    microbiological characteristics;
        iii.    comply with any label declaration of nutritional data,

Permeability is a fundamental concept in food packaging, shaping the protective capabilities of packaging materials by determining the extent to which gases and vapors can move through them. This property plays a crucial role in preserving food freshness, safety, and quality by controlling the interaction between the food product and its surrounding environment. Understanding permeability is essential in designing packaging solutions tailored to the specific requirements of different food products, as improper permeability can lead to accelerated spoilage, nutrient degradation, and undesirable changes in texture and flavor. In this chapter, we explore the science of permeability in food packaging, breaking down its core principles, the behavior of different gases and vapors in various packaging materials, and the factors influencing permeability. Additionally, we examine how permeability impacts shelf life and consumer satisfaction, offering insights into selecting materials for specific food types. By understanding and manipulating permeability, food manufacturers can develop packaging that optimally balances protection and breathability, extending product shelf life and ensuring quality

Introduction

Therapeutic foods are products, which are multiutility food products that may be used as nutrition as well as medicine. A nutraceutical may be defined as a substance, which has physiological benefit or provides protection against chronic disease. Nutraceuticals are used to improve health, delay the aging process, prevent chronic diseases, increase life expectancy, or support the structure and/or function of the body. Oflate nutraceuticals are receiving considerable interest due to potential nutritional, safety and therapeutic effects. The examples of therapeutic foods are the foods used for feeding of malnourished children on an emergency basis or to supplement the diets of persons with special nutrition requirements, such as the elderly. Therapeutic foods can also form a part of treatment/prevention/reduction of other health conditions such as diabetes, cardiovascular disease, obesity, anaemia and any other lifestyle disorders.

The incidences of diet-related diseases are progressively increasing due to greater availability of calorie-rich foods and a sedentary lifestyle. Obesity, diabetes, atherosclerosis, and neurodegeneration are major diet-related diseases. Nutraceuticals and functional foods represent a novel therapeutic approach to prevent or attenuate diet-related diseases.

There is always a requirement for cheaper formulations using locally available ingredients that are processed in a safe, reliable, and financially sustainable methods. Some of the literature available on health foods for various diseases is summarized below. However, since the burden of diabetes in India is staggering. In 2017, 72 million cases of people suffering from diabetes were reported and the figures are expected to reach 134 million by 2025, this chapter more emphasis is given on the safe, natural treatment/reduction of diabetes by herbal means.

Introduction

It is the process of retaining food over a period of time without being contaminated by pathogenic organisms or chemicals and without losing its colour, texture, flavour and nutritious value. It involves preventing the growth of bacteria, fungi and other microorganisms, as well as retarding the oxidation of fats which causes rancidity.

Objective

• To increase its shelf life, retaining original nutritional values, colour, texture, and favour.

Abstract

Application of solar energy for drying of agricultural food products is one of the most attractive and cost-effective drying techniques. However, the intermittent nature of the solar energy is one of the major shortcomings of the solar drying system that can be alleviated by storing excess energy during the peak time and using it in off sun hours or when the direct availability of solar energy is inadequate. The use of sensible and latent heat storage systems in solar dryer is an effective way of storing thermal energy for drying purpose. This chapter will present information on different thermal energy storage (TES) materials, their advantages and disadvantages. The information available in the literature regarding the studies conducted on TES assisted solar drying systems is also covered in this chapter. In addition, some of the models that have been used by different researchers to test the performance of different TES materials are also reviewed.

Thermal preservation is among the most established methods for improving the safety and storage life of food. It uses controlled heating to destroy spoilage organisms and pathogens and to inactivate undesirable enzymes. Processing intensity varies according to the target microorganisms, food composition, packaging and required shelf life. Pasteurisation reduces pathogenic and spoilage microorganisms without achieving complete sterility, while sterilisation destroys more heat-resistant organisms and spores to produce commercially stable foods. Ultra-high-temperature processing combines very high temperatures with extremely short treatment periods. This chapter also discusses retort processing, thermal-death kinetics and microbial-inactivation models used to design safe processes while minimising nutritional and sensory damage.

Introduction
Heat treatment is the most commonly used method in the dairy industry for milk processing. Its primary objective is to eliminate pathogens and reduce spoilage-causing organisms, ensuring milk is safe for consumption and has a longer shelf life. While advanced methods like high-pressure processing, pulsed electric fields, ultrasound processing, cold plasma treatment, and ultraviolet sterilization have emerged, heat treatment remains the preferred choice due to its simplicity, reliability, and proven effectiveness. All dairy products undergo some form of heating during processing, whether through pasteurization, sub-pasteurization (e.g., for milk used in aged cheeses), or sterilization. To facilitate this, liquid heating systems such as continuous heat exchangers or jacketed tanks are widely used, typically powered by steam or steam-heated water. Consequently, steam generation boilers are a standard feature in almost all dairy processing facilities.
The Key Objectives of Heat Treatment Include
1. Elimination of harmful pathogens in milk, ensuring it is safe for consumption and protecting public health.
2. Increasing the keeping quality of milk by reducing the number of spoilage organisms.
3. Inactivating enzymes naturally present in milk or secreted by microorganisms to prevent enzymatic degradation.
4. Preventing the autoxidation of lipids, which can lead to off-flavors and spoilage.
5. Inactivating agglutinin to reduce rapid creaming and maintain uniform consistency.
6. Enhancing the growth of starter cultures by eliminating natural inhibitors and dissolved oxygen in milk, essential for producing cheese and fermented products.

INTRODUCTION

By the turn of the century, consumers have been more demanding, sophisticated and discretionary. They want much safer, higher quality, and more convenient to foods. The food processor need to get the best from their existing processing technology in addition to looking for newer ones. New and alternative food processing methods and/or novel combinations of existing methods are continually being investigated by the industry in pursuit of producing better quality foods more economically. Thermal processing is one of the most important food preservation techniques that was first introduced at the beginning of 1800 and has evolved itself in to one of the most scientific mature food processing techniques of recent times. Both science and technology have gone through tremendous transformation in the last two centuries and today it is the most reliable method to assure food safety and stability. Developments in thermal processing and evolution of non-thermal processing technologies like high pressure processing, pulsed electric field, pulsed light etc. have enhanced the utility of thermal processing principles and increased the awareness of possible alternative processing technologies.

1. INTRODUCTION

Thermal processing means preservation by application of heat. It involves heating of foods in hermetically sealed containers for a specific time at a specific temperature to eliminate the microbial pathogens that endanger public health and that micro-organisms that deteriorate food during storage. The credit for invention of thermal processing (Canning) goes to a French Confectioner, Nichola Appert. The application of heat is an important method of preserving foods and is also a means of developing texture, flavour and colour in some foods.

4.1 Introduction

The food preservation may be define as the state in which the food may retained over a period of time without being contaminated by pathogenic organism or chemicals and without losing its colour, texture, flavour and nutritional value. All the methods of food preservation must provide such an environment in and around the preserved food so that it produces one or more unfavourable conditions to the continued activity of the spoilage agents. The various methods used for food preservations are:

1. Introduction

Thermodynamics is science of energy and may be defined as “The branch of science which deals with the Interoction between the heat and work is referred as Thermodynamics

’Thermo’ means heat and ’dynamics’ means motion. It deals with energy interaction when work is converted into heat energy or vice versa. Precisely, thermodynamics may be defined as a science which deals with energy transformation from one form to another and dealing with relationship among the properties ofthe system. In power plants, internal combustion engines, boilers, nozzles, diffusers etc. are the example where heat is converted into work. In compressor, turbine, cooling of engines by water, application of brakes in a vehicle etc. are the examples where work is converted into heat.

Highlights • Banana leather can be enriched with microencapsulated ? – 3 fatty acid for value addition. • Blanching can destroy more than 80% of vitamin C content. • Henderson and Pabis model can better predict the drying kinetics of banana leather. Introduction The ever increasing demand for functional foods having numerous health benefits has been an active research ground for the food scientists around the globe. Till date, many food products have been formulated to deliver functionalities by value addition with bioactive compounds (Carvalho Barros et al., 2020). These products have been extensively studied and proved to be beneficial, especially for elder age group against various metabolic syndrome and health complications. Functional foods are edible products fortified with compounds having additional health and safety benefits such as vitamins, minerals, and bioactive compounds (Granato et al., 2020). One such example of a nutritionally dense food product with the potential of fortification to meet certain health benefits is fruit leather.

1.    I deem it a singular honour to deliver Dr. Sen Memorial Lecture. Dr. Sen, who was both an administrator and a visionary, was instrumental for:

Most of the fruit, vegetables, and their products contain acid or a mixture of acids. These acids are mainly responsible for the tartness or sour taste. The level of acidity is estimated to measure the degree of tartness/sourness in the product.
Principle
Acidity in the sample is measured by titrating a known volume of sample against a standard alkali solution of known concentration using phenolphthalein as an indicator. The appearance of a light pink color indicates the endpoint of titration. However, for highly colored products like tomato sauce/ketchup, jamun juice, Rhododendron juice, mixed fruit jam, etc., accurate determination of endpoint may be difficult by using an indicator. Therefore, for such samples, acidity is measured by using electrometric methods i.e. titration to a predetermined pH value, or the sample is further diluted with distilled water to mask the interfering color. The level of titratable acidity is expressed in terms of the predominant acid. Different fruits, vegetables, and their products have different predominant acids. A list of some products having predominant acid is shown as under:

Materials Required

Cut flowers, 1000 ml conical flasks, scissor, tape, distilled water, chemicals, weighing balance, volumetric flasks, labels, thermometer (max. & min. type) and hygrometer. 

Procedure

    1.    Collect fresh spikes of flowers
    2.    Cut at the base keeping about 25-60 cm of the cut flowers stick (uniformly for each flower).
    3.    Prepare Pulsing/ Vase solutions.
    4.    Put the prepared flower spikes in labeled conical flasks containing different Pulsing/ Vase solutions (for a known period of time).
    5.    Record the weight of the spikes and other observations daily.
    6.    Record the temperature and relative humidity of the storage chamber daily.
    7.    Analyse the recorded data and draw conclusion about the best vase solutions for the selected cut flower.

Materials Required

Fruits/ vegetables, weighing balance, plastic crates, CFB boxes or other packaging material fruit pressure tester, hand refractometer, markers etc.

Procedure

    1.    Harvest the fruits
    2.    Subject them to various pre-treatments (as discussed in previous exercise).
    3.    Record their initial parameters i.e. weight, firmness, surface colour, TSS, rotting etc. 
    4.    Place properly packed commodity in storage alongwith a check under ambient conditions
    5.    Record the observations regarding changes in quality during storage
 

Materials Required

Fruits/vegetables, thermometer, refractometers, NaOH, Phenolphthalein, glassware, weighing balance, plastic crates for storage of commodity, water cooling facility.

Procedure

    1.    Harvest the fruit / vegetable
    2.    Count No. of unmarketable fruits in every 100 fruits harvested
    3.    Record the internal fruit temperature in about 5-10 randomly selected fruits with the help of a thermometer
    4.    Pre-cool the commodity in cold water (<5ºC), air or refrigerator till the temperature reaches near its optimum storage temperature
    5.    Record the internal fruit temperature
    6.    Record the time required to pre-cool the commodity
    7.    Keep the product for storage at ambient conditions alongwith control
    8.    Record the difference in the shelf life and quality during storage

Materials Required 

Fruits/vegetables, hand refractometers, fruit pressure tester, weighing balance, scale, chemicals and glassware required for analysis.

Procedure

    1.    Go to the orchard or vegetable field and collect samples of fruits and vegetables
    2.    Apply the specific maturity indices to the samples

Materials Required

Fruits/ vegetables, washing tanks/ containers, size grader, fruit waxes, packaging material, neem based fungicides etc. 

Procedure

    1.    Take available fruits or vegetables 
    2.    Wash them in plain water or chemical solution as told by the teacher
    3.    Shade dry the fruits / vegetables
    4.    Prepare suitable wax solution
    5.    Apply wax on to the fruits as told
    6.    Record the fruit weight before packing
    7.    Pack the fruits properly in the trays / boxes depending upon the type and purpose
    8.    Do curing if required 
    9.    Do pre-packaging, if desired
    10.    Label the package for desired information
    11.    Keep the fruits for storage
    12.    Record the observations pertaining to weight loss and rotting periodically depending upon the commodity and its shelf life.

A. Tomato and Tomato Products
Tomato though botanically a fruit is generally considered a vegetable because of how it is consumed. Commercial products from tomatoes include juice, puree, paste, ketchup, soup canned and dehydrated tomatoes. Processing of tomato is now practised from home scale level to large scale enterprise. As a semi-finished product, tomato puree is prepared on a small scale while at a large scale, tomato paste has gained commercial significance. Both puree and paste are used for the preparation of different finished products like ketchup, juice, soup etc. The method for preparation of these products is well standardized, however, some modifications concerning recipes are made in the processing plants owing to variations in the quality of the raw material. The methods for the preparation of different tomato products are discussed as under: -
I. Tomato Juice/Pulp
Tomato juice is an unconcentrated product consisting of a liquid with a substantial portion of the pulp, expressed from ripe tomatoes with or without the application of heat and the addition of salt. Tomato pulp/juice is the basic ingredient for the preparation of different tomato-based products such as tomato puree, paste, ketchup etc. Fully ripe tomatoes are used for the preparation of tomato juice/pulp. All green, blemished and overripe fruits should be rejected as they adversely affect the quality of the product. The juice obtained from overripe tomatoes is usually thin and unpleasant. The juice should be deep red in colour with a characteristic taste and flavour. The juice shall have about 0.4% acidity expressed as citric acid. Cane sugar (1%) is added to further improve the taste and flavour of the finished product.

Essentials for Quality Product Preparation

Plant ripened red tomatoes should be selected. Yellow and green fruits on processing yield dull colour and turn brown due to oxidation.

Never use iron equipment for processing. Lycopene oxidizes and turns brown when comes in contact with iron. It also forms black compounds with the tannins present in tomatoes or the spices which are used for product preparation.

Avoid prolonged heating and cool immediately to avoid over-cooking.

1. Tyson Foods Inc. 
2210 W. Oaklawn Drive, Springdale, AR 72762-6999 
Phone  : 479-290-4000; Fax  : 479-290-4061; Web site  : www.tyson.com

Executives : Chairman : John Tyson; Pres./CEO : Richard Bond; SVP-Intl. Ops. : Mike Baker; SVP-Commodity Trading & Risk Management : Jean Mrha Beach; Group VP-Research & Development, Logistics & Tech Services : Hal Carper; SVP & CIO : Gary Cooper; Group VP & International Pres. : Rick Greubel Jr.; SVP, Controller & CAO : Craig Hart; VP, Assoc. General Counsel & Secretary : R. Read Hudson; Group VP-Ops : Donnie King; SVP-Human Resources : Ken Kimbro; EVP & CFO : Dennis Leatherby; Group VP-Food Service : Bernard Leonard; Sr. Group VP-Fresh Meats : James Lochner; SVP-External Relations : Archie Shaffer III; Group VP-Consumer Prods : Donnie Smith; EVP & General Counsel : David Van Bebber; SVP-Renewable Products : Jeff Webster; VP-Investor Relations & Asst. Secretary : Ruth Ann Wisener

Abstract
 
The definition of quality is described from a very simpler one “fitness for purpose or use” to a comprehensive “the totality of features and characteristics of a product or service that bear on its ability to satisfy stated or implied needs”. The concept of total quality management in food industry is adopted recently and it is the “integrated organization approach in delighting customer (both external and internal) by meeting their expectations on a continuous basis through everyone involved with the organization working on continuous improvement in all products/processes along with proper problem solving methodology”. TQM is concerned with the integration of all the efforts in organization towards quality improvement, quality development and quality maintenance to meet full customer satisfaction at economic levels. TQM enhances the work culture and employee’s satisfaction through participation and involvement and consequently the image of the organization.