eChapters

Liberalized economies and evolving businessstrategies push variousindustries to achieve a competitive edge both in the domestic and international markets. Food industry especially, works on the bedrock of quality of products and services in order to attract and retain customers. In this new world of economic order, customers can select from wide range of products and services that are available in the market.

Measurements of sugars in the fruit can indicate the stage of maturity. Total soluble solid (TSS) contents can give a reliable measure of the sugar and other water-soluble components in fruits, vegetables, and their products such as juice, squash, jam, preserve, candy, sauce, ketchup, etc., In climacteric fruits, carbohydrates accumulate during maturation in the form of starch, and as the fruit ripens the starch is broken down into sugar. In non-climacteric fruits, sugar tends to accumulate during maturation. The presence of sugars, acid, ascorbic acid, and other water-soluble components in the fruit, vegetable, and their products are measured as total soluble solids.
Principle
Soluble solids can be determined using a refractometer which measures the refractive index or a brix hydrometer which measures specific gravity. A Brix hydrometer is used to determine the percentage of brix in syrup while an Abbe refractometer gives both refractive index as well as degree brix. The Refractive index of the test solution is measured at 20°C using a refractometer and the soluble solid content is calculated by the use of tables correlating the refractive index with soluble solids.

1. INTRODUCTION

Food is any substance consumed to provide nutritional support for the body. It is usually of plant or animal origin, and contains essential nutrients, such as carbohydrates, fats, proteins, vitamins, or minerals. The substance is ingested by an organism and assimilated by the organism’s cells in an effort to produce energy, maintain life, or stimulate growth. A food contains some non-nutrients, some of which may even have a detrimental influence on the consumers, while some may be inert and have no effect. Nature has endowed many plants with the capacity to synthesize a wide variety of chemical substances that are known to exert a deleterious effect when ingested by animals and are called as antimetabolites. These substances are also referred to as antinutritional factors when they are present in food/feedstuffs and influence a metabolic pathway when introduced into and/or eaten by an organism.

There is a wide distribution of biologically-active constituents throughout the plant kingdom, particularly in plants, used as animal feed stuff and as human food. The knowledge that these compounds elicit both toxic and advantageous biological responses has given rise to several investigations in recent times as to their possible physiological implications in various biological systems. It is well known that plants generally, contain antinutrients acquired from fertilizer and pesticides and several naturally-occurring chemicals. Some of these chemicals are known as ‘‘secondary metabolites’’ and they have been shown to be highly biologically active. They include saponins, tannins, flavonoids, alkaloids, trypsin (protease) inhibitors, oxalates, phytates, haemagluttinins (lectins), cyanogenic glycosides, cardiac glycosides, coumarins and gossypol and the list is inexhaustible. Some of these plant chemicals have been shown to be deleterious to health or evidently dis-advantageous to human and animal health, if consumed in appropriate amounts. Most of these secondary metabolites elicit very harmful biological responses, while others are widely applied in nutrition and as pharmacologically-active agents. The pharmacological and other beneficial effects of these antinutritional factors in plants have been reviewed here.

Trade in fruit and vegetable products has been among the most dynamic areas of national as well as international agricultural trade, stimulated by rising incomes and growing consumer interest in product variety, freshness, convenience, and year-round availability. Advances in production, postharvest handling, processing, and logistical technologies—along with increased levels of international investments have played a facilitating role.

4.1. Global Trade of Processed Fruits & Vegetables

4.1.1. Country Wise Trends of Export in Value-Added Fruits

Table 4.1 shows the processed fruits export of top 15 countries in the global market. The USA remained the largest exporter at global level with the exports valued at USD 15089573 thousand with a share of about 12 per cent. The Compound Annual Growth Rate (CAGR %) of the USA was noted 7.58 per cent. Spain is the second largest exporter of processed fruits and vegetables with the CAGR of 6.14 per cent and share of 8 per cent. Some other dominant exporting nations are namely, Mexico, Netherlands, China, and Chile, showing a CAGR nearly, 13 per cent, 11 per cent, 16 per cent and 9 per cent, respectively.

Cheese, butter, whole milk powder, and skimmed milk powder are a major part of the world’s dairy trade. The demand for worldwide dairy exports is highly concentrated. With a share of 12 per cent, New Zealand is the largest exporter of dairy products, followed by Germany, Netherlands, France and the US. Germany has been the world’s major dairy importer as well with a share of 10 per cent. Other large dairy product importers are China, Netherlands, France, Italy and Belgium.

Before 1999, India was a net importer of dairy products. The successful implementation of the ‘Operation Flood’ program and trade reforms caused the direction of India’s dairy trade to change marginally. India has been a net exporter of dairy products since 2000. Statistics show that India’s export share of dairy products over world dairy exports increased marginally from 0.1 per cent in 2001 to 0.5 per cent in 2019, while its import share of dairy products over world dairy imports increased marginally from 0.018 per cent in 2001 to 0.04 per cent in 2019. The Middle East, South Asia, South East Asia, and the USA are the major markets for India’s dairy products. Conversely, India is a favorable market for the European Union, New Zealand, Australia, UAE, and US dairy products.

1. INTRODUCTION

Food fermentation is the oldest method of food preservation and have originated several million years ago. It plays an important role in ensuring the food security of millions of people around the world particularly marginalized and vulnerable groups. It is relatively efficient, low energy consuming process which needs no refrigeration or other energy intensive food preservation technologies but increases the shelf-life of foods. Fermentation ensures not only increased shelf-life and microbiological safety of food but may also make some foods more digestible and lower or eliminate the toxicity of substrate like cassava.

The food fermentation technology utilizes the ability of growth of microorganisms on various substrates for the production of a variety of fermented foods, beverages and pickles like bread, beer, cheese, idli, tempeh, miso, sauerkraut, fermented sausages, etc. Fermented foods are popular throughout the world since antiquity and in some regions these are the major component of the diet of millions of individuals. Indigenous fermented foods such as bread, cheese and wine have been prepared and consumed since ages and have occupied important place in culture, religion and tradition of people all over the world.

With increasing food production, availability and accessibility the global agro-industrial food system has improved.However, malnutrition, biodiversity loss and climate change are newer challenges. The best solution to this is the utilization of indigenous and traditional crops which will bring a transformative change in the food system. There is a need to look into the development of smallholder producers. The agro-industrial food system has improved the food supply and has made way for significant trade-offs with agro-biodiversity, dietary diversity, environmental sustainability and socio-economic stability mainly amongst the rural poor. Now is the time to mainstream the underutilized indigenous and traditional crops into the food system. This will provide opportunities to develop a sustainable and healthy food system.It will also help towards the societal goals which include employment creation, wellbeing and environmental sustainability.

Importance of Traditional Foods

Traditional convenience food, or tertiary processed food, is commercially prepared food designed for ease of consumption. Products designated as convenience foods are often prepared food stuffs that can be sold as hot, ready-to-eat dishes; as room-temperature, shelf-stable products; or as refrigerated or frozen products that require minimal preparation (typically just heating).

These products are often sold in portion controlled, single serve packaging designed for portability for “on-the-go” eating. Convenience food can include products such as candy; beverages such as soft drinks, juices and milk; fast food; nuts, fruits and vegetables in fresh or preserved states; processed meats and cheeses; and canned products such as soups and pasta dishes.

Traditional Foods

Preparation of Vadagam and Appalam

Vadagam is a traditional product mostly prepared from rice flour and also sago. It is an deep fat fried product and consumed as a side dish in the meals. Papad also known as appalam or papadam in South India, is essentially a thin wafer like product, usually circular in shape rolled from a dough made out of pulse, cereals, edible vegetable oil, alkaline and mucilaginous additives. It is normally consumed in toasted or fried form. In India, papad has been associated and deeply entwined with social customs/ rituals and has been developed into culinary art.

Introduction

Food is a culture, emotion, hospitality and prestige which is closely knitted with tradition. Traditional knowledge is a community based functional knowledge system which is developed, preserved and refined by generations through continuous interaction, observation and experimentation with their surrounding environment. It includes beliefs, values, and practices gathered from the practical experience of older generation, and its whole function is survival and development of culture of people. Traditional foods, originated from ancestral kitchens are developed through ages, invented, modified, utilised and evolved to improve nutritional and social wellbeing of the people around the world. Most of them are culture specific, region specific, environment specific, community specific and season specific. These foods are socially, culturally and economically important and provide food security, enhance livelihood and improve nutritional and social wellbeing of people. Food culture arises out of the place of a people’s origin and so traditional local foods hold the potential to bind and stabilise communities and enable a cultural continuity through conserving their histories. Indian cuisine is represented as a wide spectrum of food cultures with distinctive regional differences and preferences (Achaya, 1998).

Traditional food-preservation methods reflect generations of practical knowledge concerning food safety, storage and seasonal availability. Although commonly performed at the household level, these methods are supported by scientific principles such as reducing water activity, lowering pH, inactivating enzymes and restricting microbial growth. Blanching, fermentation, sun drying, increasing solute concentration, pickling, smoking and curing preserve foods through different combinations of heat, dehydration, acidity, beneficial microorganisms and antimicrobial compounds. Their materials and equipment are generally accessible, making them suitable for home-scale application. The chapter explains the principle, mechanism, application and nutritional implications of each method while showing their continuing relevance in contemporary food systems.

10.1 INTRODUCTION

Most botanists identify trees by their leaves, f lowers and fruit. However, the plant architecture specialist is interested in trunks, branches and twigs. All types of fruit tree do not require pruning, e.g., mango, sapota, while some fruit trees can grow well naturally, e.g., pineapple, papaya as they do not require pruning. Most deciduous trees like apple, pear, almond etc. and grapes, ber, fig, citrus, pomegranate, guava etc. require pruning to train them for desired shape.

10.2 TRAINING

Training is an operation by which the plant is made to develop an orderly structure or frame work. This is done by staking, tying, supporting, propping, trailing or spreading on certain structure with or without pruning of plant. Training is usually done when plants are young. Bending, twisting, decapitations are done by using springs of hard wire, where it is required. It is a physical technique which controls the shape, size and direction of plant growth known as training or in other words, training in effect is orientation of plant in space through techniques like tying, fastening, staking, supporting over a trellis or pergola in a certain fashion or pruning of some parts.

Introduction

Commonly available food materials especially dairy products, cereals and fruits are perishable and require processing for long term storage. The methods of food storage has been known from the pre historic times and was mostly based on processing the food into a more stable form with a longer shelf life. Such processes increases the time range of food availability and in many cases improves the taste thereby, cumulatively improving the food value. One of documented method of food preservation is by fermentation and is age old. Other commonly used methods include drying, refrigeration, salting and fermentation (Luck 1985, Paulus, 1985, Christensen et al., 2003, Martindale and Schiebel, 2017).

Flavour and appeal of food has been considered as one of the important factors contributing to the demand of the food. Originally the flavours were largely plant derived, current industrial practices largely utilise synthesis by chemical reactions and subsequent extraction to achieve a uniform quality (Weckerle et al., 2006, Davidovich-Rikanati et al., 2008, Sethupathy et al., 2018). These chemicals referred to as “flavourings” are defined as compounds that enhance the taste, appeal and palatability of food. They are naturally derived or artificially synthesised compounds. Considering that many artificially synthesised chemical flavours might affect the health adversely. Industrial food research has now shifted their focus on flavourings that are naturally available (Cohen et al., 2018). Such naturally occurring flavourings are referred to as bio-flavours (de Billerbeck 2015). The ease of producing bio active compounds from microbial culture extracts has played significant role in industrial food biotechnology (Verachtert et al., 2005).

Transportation and distribution of fruits and vegetables are important stages   of post-harvest loss. In India,  transportation of perishable commodities is in the most precarious stage. For local market, the produce is brought either by bullock cart or tractor trollies. The long distance transportation is mainly by rails and trucks, which is very costly. The basic reason for preference to road transportation is that it takes short transit period.

Introduction Consumer demands for convenience and mildly processed meals with long shelf lives have led to unique and current developments in food packaging solutions (Dobrucka and Cierpiszewski, 2014). Additionally, the development of unique and creative packaging solutions that do not compromise food safety or quality is being fueled by the current retail trend and changing lifestyles (Dainelli et al., 2008). The widespread use of packaged meals has raised consumer demand for prepared foods like microwaveable dinners, and the growing popularity of smaller food packages all help to fuel the food industry's explosive growth in creative packaging (Restuccia et al., 2010). The rise in food-borne microbial outbreaks, which calls for the usage of packaging that possesses antimicrobial qualities while retaining food quality, is another major driver of new food packaging (Appendini and Hotchtkiss, 2002). The initial advancements in packaging were electrically powered packing equipment, flexible packaging, metallic cans, aseptic packaging, aluminium foils, and flexographic printing. A considerable movement away from metal, paperboard, and glass packaging in favour of plastic and flexible packaging was also brought about by the discovery of various materials such as polyester, polypropylene, and ethylene vinyl alcohol polymers.

Food Safety

The term “safe food” has different standards to different consumers rather than just being the food handled and prepared through proper cleaning, washing and cooking. Safe food means food prepared on clean and sanitized surfaces with equipment, utensils and dishes that also are cleaned and sanitized. Nowadays consumers are extra conscious about the safety and quality of food and for that reason food safety issues have changed, so have society’s methods for making food as safe as possible. Accordingly, “food safety” means assurance that food is acceptable for human consumption according to its intended use (FSSAI 2017).

Previous Year Questions

1. Discuss the strengths and weaknesses of Public Food Distribution system in India. (8M, IFoS-2022)

2. Describe the vicious cycle of poverty and enlist the existing policy instruments for combating malnutrition. (20M, CSE 2022)

3. Enlist and explain the efforts of the GOI in streamlining the current levels of poverty (10 marks, CS 2022)

4. Enlist and explain the salient features of Public Distribution System as per the provisions of the National Food Security Act, 2013. (10M, CSE 2022)

5. Discuss the strengths and weaknesses of public food-grain distribution system in India. (8M, IFoS 2020)

1. Introduction

Intermediate moisture foods are semi moist foods that have some of their water bound by glycerol, sorbitol, salt or certain organic acids, thus preventing the growth of many microorganisms (Stewart et al. 2001). It is now well recognized that fruits and vegetables are dehydrated to an intermediate moisture level (20-50%) (Stewart et al. 2001; Purvi et al. 2003). As the intermediate moisture products are characterized by a semi moist consistency so these foods have enough moisture content to permit easy chewing but low enough water content to prevent spoilage production of intermediate moisture foods is based on an increased scientific understanding of the chemical reactions involved in traditional food preservation methods (Purvi et al. 2003).
There will be better retention of original flavor and texture compared to fully dried products, with concomitant reduction in bulk, weight and cost of packaging, transportation and storage. Such intermediate moisture foods are more appropriate for developing countries in view of their minimal processing requirements, stability under ambient conditions, safety, convenience, ease of nutrient content adjustment, energy savings and low capital investment. They are also eminently more suited than dehydrated or canned foods for military rations (FAO, 2005).

The Hans Krebs cycle, known by different names like the citric acid or tricarboxylic acid cycle, was named after the scientist Hans Krebs. The citric acid cycle is named after the citrate product formed in the cycle. The name tricarboxylic acid is given as citrate itself, which is a tricarboxylic acid due to the presence of three carboxyl functional groups (-COOH).
The tricarboxylic acid (TCA) cycle occurs in aerobic conditions and within mitochondrial ETC, involving various sequential oxidoreductase reactions. The cycle requires Acetyl-CoA (C2 molecule) and oxaloacetate molecule (C4 molecule) to begin with the formation of a citrate molecule (C6 molecule). Acetyl-CoA is generated from the pyruvate (glycolysis), the fatty acids (lipolysis), or by oxidative deamination of specific amino acids. The complete oxidation of a glucose molecule results in the end products like energy (ATP), CO2 and H2O. A molecule of Acetyl-CoA has two carbons. It is formed from a three-carbon pyruvic acid molecule generated from the glycolysis of a sixcarbon glucose molecule. Acetyl-CoA is the substrate for this cycle and is an energy-rich molecule having a thioester bond between coenzyme A and acetic acid.
8.1 Formation of acetyl-CoA from Pyruvic Acid
Pyruvate is obtained by glycolysis or the oxidation of glucogenic amino acids. The pyruvic acid produced in the cytoplasm crosses the inner membrane of the mitochondrion to enter the mitochondrial matrix, where it undergoes oxidative decarboxylation, forming Acetyl-CoA. Acetyl-CoA carries (carrier molecule) the acetyl group to the citric acid cycle. It also links various metabolic products with the TCA cycle. Such products can be from the EMP cycle, beta-oxidation, and oxidative deamination of amino acids. Oxidative decarboxylation of pyruvic acid needs a complex enzyme system known as pyruvate dehydrogenase

Introduction

The tropical root and tuber crops are comprised of crops covering several genera. They are staple foods in many parts of the tropics, being the source of most of the daily carbohydrate intake for large populations. These carbohydrates are mostly starches found in storage organs, which may be enlarged roots, corms, rhizomes, or tubers. Many root and tuber crops are grown as traditional foods or are adapted to unique ecosystems and are of little importance to world food production. Others such as cassava (Manihot esculenta Crantz) and white-fleshed sweet potato (Ipomoea batatas L.) are known worldwide. Several of these crops have been termed under-exploited and deserving of considerably more research input

Potato and Banana chips: Potato chips are one of the popular snack foods consumed throughout the country. Chips are mostly prepared by small scale artisans / confectioners, and sold in plastic film or paper packs. Recently, however some of the companies have installed plants having relatively large capacities and have started marketing chips in attractive packs. The fat content generally ranges between 25-40% and moisture content between 2-4%. Potatoes having high total solids, low reducing sugars and low amylase activity are most suitable for chips manufacture.

Banana chips are prepared from varieties rich in starch having very low levels of soluble sugars and polyphenol - oxidase activity. These are mostly processed and marketed in Southern States especially in Kerala. Previously, the chips were fried in coconut oil, but now other vegetable oils are also used in their processing. Relatively, banana chips are harder in texture than potato chips.

Types of Bakery Products

Baked goods are produced from either doughs or batters which are a mixture of flour and water made by mixing, beating, kneading or folding. The processing method depends on the ingredients being used and the product being made. Bread is either leavened or unleavened. Leavened bread is made from a mixture of flour, yeast, salt and water. Unleavened bread does not contain yeast and therefore does not rise. It is flat bread that is quicker to make than yeast-bread.

Types of Confectionery

Confectionery also called sweets or candy is sweet food product. Confectionery is divided into two broad and somewhat overlapping categories, Bakers’ Confections and Sugar Confections. Confections are low in micronutrients and protein but high in calories. They may be fat-free foods, although some confections, especially fried doughs, are high-fat foods. Many confections are considered to give empty calories.

Baker’s Confectionery

Baker’s confectionery also called flour confections includes principally sweet pastries, cakes, and similar baked goods. In the Middle East and Asia, flour-based confections are more dominant. Baker’s confectionery includes sweet baked goods, especially those that are served for the dessert course. Baker’s confections are sweet foods that feature flour as a main ingredient and are baked. Major categories include cakes, sweet pastries, doughnuts, scones, and cookie.

Abstract

Demand for starch is increasing day by day and is met by restricted range of crops. In recent years, substantial progress has been made in obtaining starch from non-conventional sources such as sweet potato, buckwheat, sago, water chestnut, which can be used as a substitute for conventional sources. So it is necessary to search for other underutilized and nonconventional sources of starch to meet the increased demand. Typha angustifolia, an aquatic weed containing appreciable amount of starch in its rhizome and roots, can be used for starch isolation to make its use in food and non-food derivatives. In many parts of the world, starch-rich roots of Typha angustifolia are eaten raw or boiled or dried roots are pulverized into a powder, and then, used as a thickener in soups or added to cereal flours to make biscuits and bread.

U value: U value is a measure of the heat transmission through a building part (wall or window) or through a given thickness of a material (insulation). U values with lower numbers indicate better insulating properties (Plate 614).

UHT milk: This milk is homogenized, heated to atleast 135oC for about 2-3 second, cooled rapidly and then packed in sterilized containers aseptically. The milk in packs can be stored for several months without refrigeration. The nutrient loss is negligible. Used for making yogurt commercially as it does not need to be boiled again.

UHT pasteurization: The milk is heated to ~150oC for a fraction of seconds practically no holding period. It is also called ultra pasteurization.

UHT sterilization: It is method in which food is sterilized, cooled and then aseptically placed in previously sterilized containers which are subsequently sealed in an aseptic environment.

Introduction and Relevance
UHT processing of milk was developed to produce a shelf-stable product with minimal chemical changes as encountered with sterilized milk. Aseptically packaged UHT milk can have a shelf life of 06 to 12 months and does not need to be stored in a refrigerator. Its role in the market varies by region. In countries like the India, USA and Canada, where UHT milk occupies a smaller segment of the liquid milk market, it is often used as a backup option, reserved for situations when pasteurized milk is unavailable. Conversely, in regions such as Europe, (particularly France, Belgium, Spain and Germany), Asia, (China, Japan, Thailand and Vietnam) Latin America and (Brazil) in UHT milk is the dominant form of milk available and is consumed regularly. In markets where it is a backup option, UHT milk requires long-term stability of 6–12 months, while in regions where it is used daily, a shorter shelf life of three months or less is often sufficient.
Ultra-High Temperature (UHT) treatment involves heating milk to very high temperatures, typically between 130°C and 150°C, for a brief period of few seconds. This process results in commercially sterile milk, meaning that while not all bacteria are destroyed, those capable of growing under ambient storage conditions are effectively eliminated. An essential component of UHT processing is aseptic packaging, where the sterilized milk is filled into presterilized containers in a sterile environment. This combination ensures that the milk remains free from contamination and maintains its extended shelf life without requiring refrigeration.
Standards for UHT processing vary globally. In the European Union, a minimum temperature of 135°C with an appropriate holding time is mandated. In the United States, the standard for ultra-pasteurization is 280°F (137.8°C) for 2 seconds. Many international standards recommend 135°C for at least 1 second, though some countries do not specify minimum conditions. However, this level of treatment is often regarded as insufficient for completely destroying the spores of spoilage organisms, highlighting the importance of precise temperature-time combinations and the critical role of aseptic packaging in ensuring product safety and stability.

Abstract

Application of ultrasound is one of the most promising uses of novel technologies in food processing. Use of ultrasound at various stages of drying has resulted in significant decrease in drying time and improvement in quality characteristics of dried products. The chapter discusses the principle behind use of ultrasound, general application in food industry with detailed description of various drying processes and equipments assisted by ultrasound.

ABSTRACT

Fruits and vegetables are rich source of bioactive compounds such as polyphenols, antioxidants and flavonoids. Drying is one of the common methods for preservation of food and agricultural commodities. However, drying may negatively affect the product quality attributes. This article is a capsule overview of current state of art ultrasound (US) assisted drying on technical aspects and bioactivity of fruits and vegetables. US assisted drying is an economical and sustainable technique compared to other existing conventional techniques used for food processing and preservation. US as a pretreatment before drying of agricultural-products enhances drying efficiency, inactivate enzymes and improve overall quality of dried products. Current developments and available solutions in drying have shown that US assisted drying may be used to restrict the loss of crucial bioactive components occurring naturally in fruits and vegetables. US when combined with hot air drying helps in achieving adequate drying rate at lower temperatures and improves overall dehydration process. This technique has found no practical application commercially due to various difficulties in achieving high-intensity US in air. One practical benefit of using US assisted drying is the minimization of the drying time along with reduction in total energy consumption.

Introduction

Organic substances consumed for nutritional purposes can be called as “food”. Food contains biomolecules, like, protein, lipid and carbohydrate, inorganic minerals as salts, and organic substances, such as, vitamins, emulsifiers, acids, antioxidants, pigments, polyphenols and flavour-producing compounds. They can be of plant or animal origin. Depending on the durability in terms of suitability of consumption, foods can be perishable, semi-perishable and non-perishable. Food spoilage occurs due to chemical, microbial, or physical actions. eventually affecting its nutritional values, colour, edibility and texture (M. Rahman, 2007).

Beverage: It includes all drinks whether they are fermented or unfermented, prepared from fruits or non-fruit, sweetened or unsweetened eg. tea, coffee, coca cola, cider, maaza are all beverages.

Fruit Beverages : Beverage which is prepared partly or fully from fruit juice or pulps with or without additives eg. pure fruit juice, squash, cordial, RTS beverage etc.

Non-fruit Beverage : Beverage which does not contain any fruit part eg. Coca cola, pepsi, sherbet etc.

Unfermented Juice or Pure Fruit Juice: This is the natural juice pressed out of the fruit and practically its composition remains unaltered during preparation and preservation. No additives like sugar, acid, water etc. are added. eg apple juice, orange juice.

Fruit Juice Beverage: This is the fruit juice that has been considerably altered in composition by adding water, sugar, acid, flavour, colours, preservatives etc. before consumption. It may or may not be diluted before it is served as a drink eg. squashes, nectars, appetizers etc.

A. Mixing and Homogenization

1. I.ntroduction to Mixing and Homogenization

In the food industry, mixing and homogenization are fundamental procedures that are essential to the production of a wide range of food items. To produce the desired qualities and final result with uniformity and consistency, various ingredients are blended. Ensuring product quality, stability, and customer happiness are contingent upon these processes.

Importance of Mixing and Homogenization

Mixing and homogenization are paramount for several reason

A. Novel Dehydration Technologies

Dehydration, the process of removing moisture from food products, is crucial for enhancing shelf life, reducing weight and volume for transportation, and preserving nutritional value. Traditional dehydration methods, such as sun drying, air drying, and freeze drying, have been widely used for centuries. However, advancements in food technology have led to the development of novel dehydration technologies that offer improved efficiency, quality retention, and sustainability.1. Vacuum Microwave Dehydration

Vacuum microwave dehydration is a cutting-edge dehydration technique that combines the advantages of removing moisture from food products while preserving their color, flavor, texture, and nutritional content (fig 1).

A. Non-thermal Processing

Non-thermal processing encompasses a diverse range of food preservation and treatment techniques that do not rely on heat as the primary means of achieving microbial inactivation or quality preservation. Unlike conventional thermal methods such as pasteurization and sterilization, which involve exposing food to elevated temperatures for a specified duration, non-thermal processing methods operate at or near ambient temperatures. These innovative technologies offer several advantages, including the preservation of sensory attributes, retention of nutritional quality, and minimization of detrimental effects on food texture and f lavour (fig 1).

Distillation, leaching, and extraction

A. Distillation

Distillation is a widely used separation process in various industries, including chemical, pharmaceutical and food processing. It is particularly important in the production of alcoholic beverages, essential oils, and purified water. Distillation works on the principle of exploiting differences in the volatility of components in a liquid mixture to separate them based on their boiling points.

Principles of Distillation

Distillation is a time-tested and versatile separation technique employed across a myriad of industries for separating components of liquid mixtures. Its effectiveness lies in its ability to leverage differences in boiling points among the various constituents of a mixture.

INTRODUCTION

Food processing is necessary for the conversion of raw food products in to finished products with desired textural, sensory and nutritional attributes. This is required to be done mainly due to seasonal production and facilitating non-seasonal availability of different commodities. Stages of processing are primary and secondary. In primary processing raw material is converted into food commodities, while in secondary processing commodities are converted into edible products. Processing is mainly done to convert the products into edible forms, to extend shelf life, availability, accessibility and also to provide variety into the form of value added products. Processing of products destroys inhibitors, microorganisms, retards physico-chemical and biochemical deterioration, maintains good sensory properties, preserves and enhances the nutritive value. Unit operations involve phase changes and sometimes chemical reactions also, which are undesirable as they cause inferior quality of the product (Gekas 1992). Different processes like separation, assembly, preservation and packaging are broader classification for unit operations in food processing (Saravacos and Kostaropoulos 2002).

Introduction: Food processing involves different steps from receiving raw material, preparing for product manufacture, and packaging to storage. All these steps are called unit operations. They are broadly categorized as raw
material preparation (receiving, sorting, grading, washing, peeling, blanching, slicing, cutting, dicing etc), processing (canning, drying, pulping, juicing, product manufacture like jam, jelly, preserves, candies, pickling, sauce making, etc.) and post-production handling including packaging and storage. A brief detail about each unit operation is discussed as under:
1. Raw Material Handling
Material handling includes varied operations such as hand or mechanical harvesting on the farm, transportation in trucks or refrigerated vehicles of perishable produce to the market or to the processing plant or to store/godowns. For conveying, a wide variety of mechanical conveyors is used depending on the type of material. Common conveyors used in the processing plant include screw conveyors, bucket conveyors, belt conveyors and vibratory conveyors. Throughout these operations, care is taken to maintain sanitary conditions, minimize bruises and product loss, maintain raw material quality like physical appearance, and vitamin contents, minimize microbial growth and minimize other detrimental changes to the product quality during handling etc. It also includes other unit operations like receiving, cleaning/washing, sorting, grading, peeling, halving, slicing, blanching etc for preparation of fruit and vegetables for processing.

1. Fundamental Concepts of Unit Operations

    1.    Process is the set of activities or industrial operations that modify the properties of raw materials with the purpose of obtaining products to satisfy the needs of a society.

    2.    Food process engineering includes the part of human activity in which the knowledge of physical, natural, and economic sciences is applied to agricultural products as related to their composition, energetic content, or physical state.

    3.    Food process engineering can also be defined as “the science of conceiving, calculating, designing, building, and running the facilities where the transformation processes of agricultural products, at the industrial level and as economically as possible, are carried out.

    4.    In a discontinuous operation the raw material is loaded in the equipment; after performing the required transformation, the obtained products are unloaded. These operations, also called “batch” or “intermittent,” are carried out in steps:

Food Plant Hygiene

A. I.mportance of Food Plant Hygiene:

1. Ensures the Safety and Quality of Food Products: Proper hygiene practices within food processing facilities play a critical role in safeguarding the safety and quality of food products. By adhering to stringent hygiene protocols, including thorough cleaning, sanitation, and preventive measures, facilities can effectively prevent the contamination of food products by harmful microorganisms, chemicals, or physical hazards. This helps minimize the risk of foodborne illnesses and ensures that consumers receive safe and wholesome food products. Additionally, maintaining cleanliness and hygiene in food proce

SYNOPSIS

The availability of food is of paramount importance without which it is hard for human beings to survive. The recognized way of making food available is to produce but it is also equally important that food produced is utilized well without loss of edible food materials. The paper discusses on unused food, under- utilized food within and across countries, and puts emphasis on utilization and handling of food. In perspective, the paper highlights the steps to be taken up to save and utilize the food already produced.

SYNOPSIS

This millennium has brought about serious challenges as well as excellent opportunities for the betterment of humanity. The migration of rural population to urban areas is one of the major challenges foreseen. It is expected that much of the population growth is expected to take place in the cities of the developing world. By 2020, about 52 percent of the developing world’s population will be living in urban areas (IFPRI, 1999). The agricultural areas around cities offer great promise to urban and peri-urban agriculture.

The interventions on Urban and Peri-urban Agriculture (UPA) suggested and initiative undertaken by FAO is timely and valuable in the interest of the teeming population demanding for both nutrition and health. The International Conference on Vegetables (ICV-2002) held during 2002 has emphasized the importance of vegetables; FAO International Workshop on Urban and Peri-urban Agriculture for Asian Countries organized during 2005 had amply emphasized the important role of horticulture; and the International Conference on Horticulture (ICH-2009) held during 2009, has amply illustrated the importance of horticultural crops particularly vegetables in UPA for the benefit of urban population.

The urbanization process is a reality that drives people to go and live in the cities. It is very pronounced in Latin America where already 85% of the population lives in cities; in Asia the average is reaching 60% whereas in Africa the phenomenon has started later and has now reached 35%. Besides the increased demand for food, there has been a rapid increase of poverty, unemployment, hunger and malnutrition in the Urban and Peri-urban environment around the world that are of great concern to central and municipal authorities.

UPA can contribute to feeding the urban population, generate income and employment and thereby reduce poverty. In reality many countries have already UPA related activities going on in areas of horticulture including vegetables, dairy production, small livestock, aquaculture and forestry. However, it has been realized that very few countries had actually investigated the real opportunities and constraints linked to the urban agriculture sector.

Keywords : Urban Agriculture, Urban Food, Peri-urban Agriculture, UPA.

The uronic acid pathway is a minor and alternative pathway for glucose oxidation and for the production of uronic acid sugar. Uronic acids of sugars are formed when the terminal carbon’s (C6) hydroxyl group (CH2OH) of sugar gets oxidized to a carboxylic acid. Uronic acid names depend on the name of the parent sugars. Uronic acid of glucose is glucuronic acid, hexose uronic acids are hexuronic acids, and pentose uronic acids are named penturonic acids. The uronic acid pathway is located in the cytosol of the liver and adipose tissue.
The glucuronic acid should not be confused with gluconic acid (aldonic acid) and glucaric acid (aldaric acid or dicarboxylic acid). Gluconic acid (aldonic acid or “onic” acid) is obtained from D-glucose by oxidizing its aldehyde group at C1 to a carboxyl group. Glucaric acid (aldaric or dicarboxylic acid) is formed upon oxidation of both the terminal hydroxyl groups (C1 and C6) and the aldehyde. They have two carboxylic acid groups. This pathway yields pentoses & ascorbic acid or vitamin C (not in primates & guinea pigs) from glucose.

Abstract

The constant improvement in automation of bakery industry has placed higher demands on wheat. As a consequence bakery industry requires wheat possessing specific quality attributes. In view of this, there is need to produce good quality wheat not only for good chapattis but also for better bakery products viz., bread, biscuit, noodles, pasta products. New technologies are emerging which could be exploited for determining the Indian wheats for their suitability for various value added products. In the current investigation, 50 genotypes possessing low protein content (<10.5%) selected from a vast amount of breeding material were analysed for their biscuit making attributes. These lines were screened by actual baking test and alkaline water retention capacity (AWRC) test keeping the standard prescribed for biscuit making qualities viz., low protein content, low sedimentation value, low AWRC and larger diameter with larger spread factor of biscuit. Further with the help of Stable Micro Systems TA.HDi Texture Analyser the biscuits were analysed for hardness and crispness. Correlation coefficient among 8 quality traits suggested highly significant and positive correlation between sedimentation value and AWRC, biscuit diameter and spread factor, and biscuit hardness and fracturability, and significant negative correlation between biscuit diameter and its thickness. On the basis of findings, genotypes identified for biscuit making qualities may be used as donor for developing varieties suitable for biscuit making.

Different basic as well as advanced laboratory equipment need to be used in a laboratory while conducting experiments. Many of them like pH meter, laminar air-flow hood, viscometer, thermometer, magnetic stirrer, microwave ovens, incubators, sand-bath, water-bath, oil-bath, etc. are the basic and simple equipment which require to be used routinely while conducting experiments in a laboratory. However, basic knowledge of their operation, handling procedure, when to be used, how to be used, and more importantly what not to be done with it, etc. are essential for keeping them in serviceable condition as well as for the accuracy/precision in their operation. In this chapter, we will discuss about some of the routinely used laboratory equipment along, while some other sophisticated equipment will be discussed in other chapters.

pH Meter

A pH meter measures exactly the H+ concentration of a solution; thus indicates acidity or alkalinity of a solution with greater precision. Actually, it measures the difference in electrical potential between a pH electrode and a reference electrode, and display the results converted into the corresponding pH value. Electrode is the key part (rod-like structure, usually made of glass) of a pH meter, having a bulb at the bottom containing a sensor. The pH meters range from simple and inexpensive pen-like devices (portable/pocket pH meter) to complex and expensive laboratory instruments with computer interface (Figure 5.1).

Frequent calibration of a pH meter using the solutions of known pH (standard solution of pH 4.01, 7.00, 10.01, Figure 5.2), generally before each use, ensures the accuracy of the instrument. For very precise work the pH meter should be calibrated before each measurement. For normal use calibration should be performed at the beginning of each day. This is necessary because the glass electrode does not give a reproducible measurement over a longer period of time.

Introduction

To accomplish experimentations in laboratories, sometimes we need microscope to test/validate our ideas/findings. A microscope is needed to examine objects which are very small which cannot be visualised by naked eyes. However, microscopic study requires some expertise in operating the microscope, particularly the sophisticated microscopes, as well as to prepare (peeling, sections, cutting, fixation, staining, dehydration, mounting, etc.) the sample, so that it can be appropriately examined for the anticipated details.

According to the scientific requirements different types of microscopes are used in the laboratories for research purpose. In this chapter, our aim is to acquaint you with the basics of using and handling of microscopes, particularly a compound microscope that is commonly used by the graduate and post graduate students for basic research.

Microscopy is often designated as the scientific investigation that is employed to review and analyse minute structures and objects using a microscope. The term “microscope” has been derived from ancient Greek words “micros” meaning “small” and “skopeîn” meaning “to look at or see,”.

Microscope

A microscope is a laboratory instrument used to examine objects (biological specimens) which are too small to be seen by the naked eye. The microscope must accomplish three tasks:

• Magnification- to provide a magnified image of the specimen.

• Resolution- to separate the details in the image.

• Contrast- to render the details clearly visible to the eyes.

Although we will tnroduce to you the different types of microscopes used for different speciments, our main focus is to discuss about compound microscope, which is commonly used in the laboratories. Compound microscope was developed around the beginning of 17th century.

A variety of glassware like burettes, pipettes, measuring cylinders, flasks, separating funnel etc. are used for experimental purposes in a laboratory. All of these need to be used and handled correctly, otherwise the chances of experimental error and damage to the glassware increase significantly. Being made of glass, they need special care while washing and using in experiments because even a minor mistake in handling of glassware may result in breakage of the apparatus. With this precautionary note, let us discuss about some of the specific glassware used in the laboratories.

Burette

Burette is a long graduated glass tube with a stopcock at one end for delivering a known/desired volume of a liquid, especially in titration experiments. It contains a stopcock at the lower end and a tapered capillary tube as the stopcock’s outlet. The flow rate of liquid from the tub stopcock’s outlet can be controlled with the help of stopcock valve. Burette is used for measuring the volume of a solution/chemical added in a quantitative (titrimetric) estimation experiment.

Procedure of using a Burette

The burette reading must be noted before and after delivering the chemical/ solution from the burette. The difference in these two readings is the volume of the chemical/solution released out of the burette. The solution should be released slowly/drop-by-drop to avoid any experimental error/mistake. If the solution/chemical is allowed to pour out too fast, the wall of the burette will not drain properly and some liquid may remain sticking to the surface of the walls. Moreover, excessive amount of chemical may be released/dropped during the experiment, particularly during the titration experiment wherein we need to know the exact amount of acid/base needed to get neutralization point. Thus, any minor mistake may lead to get a faulty reading. The measuring capacity of a burette usually used in a laboratory is 50 mL.

Since mouth pipetting of liquid reagents in a laboratory is not advisable, different tools are needed for safe, easier, and precise dispensing of liquid reagents. This chapter is devoted to make you aware of the tools like vacupette and micropipette which can be used for the handling of liquid reagents in a safe and precise way.

Vacupette

Glass pipettes have been traditionally used by sucking liquid solvent/solution directly using mouth. For safety reasons, mouth pipetting is no longer permitted in a laboratory. Hence, to fill a pipette vacupette is used by placing it on the top of glass or plastic pipette. It acts as a device to create vacuum for filling reagent in the pipette as well as for releasing the reagent with mechanical regulation on the flow out of the liquid. Vacupette can be of different types.

1. Rubber Bulb Vacupette

Rubber bulb vacupette is often used to transfer (pump up and discharge) liquid using a pipette when a larger quantity of chemicals is to be transferred. Small/tiny rubber bulb is attached to glass/plastic pipette for drawing little amount of reagents. Small vacupette is used to precisely discharge smaller volume/ drops.

Handling of Vacupette

• Insert the top of a pipette in the bottom of the rubber bulb vacupette (Figure 6.1).

• Remove air from the pipette by squeezing valve “A” at the top of the vacupette while simultaneously squeezing the rubber bulb. The amount of air released depends on the size of the rubber bulb.

Introduction

Food ingredients sector is indicating ample prospects for growth. The segment is an obligatory element for the growth of the food and beverage sector. These ingredients are also driving the development of the healthy functional foods industry to increase by 20% growth annually. Innovation in the food and beverage market, especially in the processed food domain, has created innumerable opportunities for new product development in the ingredients market as well. The segment is driven by the growing food processing industry and India is emerging as ingredients bowl of the future. Additionally, growing urbanization coupled with industrialization and changing lifestyles have led to growing demand for convenient food that offers health benefits, over and above the basic nutritional benefits of the foodstuff. There are nearly 10 to 15 broad classes of ingredients that include the very basic ingredients as well as certain value added ingredients that have niche applications. Key ingredients are preservatives, flavours, colours, hydrocolloids/stabilizers, emulsifiers, artificial sweeteners and value added health food ingredients such as omega-3-fatty acids prebiotics, probiotics etc. Until recently, there has been limited research into functional foods in meats, while functional foods in the dairy sector have been developed to a high degree. But meat is less allergenic than many other foods and much more research into the development and marketing of novel functional meat products is required. Such meat products would open up a new market for the meat industry. Nutraceutical and functional food industry is a very vibrant industry today with the claims and a clear mandate of health, wellness and prevention of diseases as one of its main goals.

The history of plant growth regulation was knownfor many years before the time of Christ, when it was common practice in the Middle East to place a drop of olive oil on figs to promote development. The use of plant growth regulators (PGRs) to modify growth and flowering of pineapple began in 1930s. In eighteenth century when a carpenter was working in a greenhouse in the Azores Islandaccidently set fire to a pile of shavings. To the surprise of the grower who had thought his plants were ruined, they burst into flower instead of being damaged (Collins, 1960). In Hawaii, Rodriguez (1932) noticed in the pineapple fields that smoke from brush fires adjacent to the field caused premature flowering. The ingredients of smoke were subsequently found to be ethylene and acetylene, the unsaturated hydrocarbons. During the 1940’s, auxins were also shown to produce this effect,α-Naphthalene acetic acid (NAA), β-Naphthalene acetic acid (BNA), Fruitone and naphthaleneacetamide were the next forcing agent to become commercially used in pineapple. Since that time many works have been carried out with improving results like natural and synthetic compounds that alter function, shape and size of crop plants have been discovered. Today, specific PGRs are used to modify crop growth rate and growth pattern during the various stages of development from germination through harvest and post-harvest preservation. The use of regulating chemicals has become an important component of agro-technical procedures for most of the cultivated plants and especially for fruit plants.

Introduction

It became clear from the discussions of previous chapters that probiotics perform metabolic functions such as fermenting indigestible dietary residues and endogenous mucus, production of vitamins, and absorption of minerals. They also play key role in intestinal epithelial cell proliferation and differentiation, and the homeostasis of the immune system. Further, probiotics are also known to involve in modifying gut pH, antagonizing pathogens through the production of antimicrobial compounds, competing with pathogens for recept or sites as well as for available nutrients and growth factors, stimulating immunomodulatory cells of the host, and produce a wide range of enzymes such as lactase, amylase, lipase, protease, phytase and so on. The molecular mechanisms of probiotics are largely unknown and opens avenue for research in probiotics. Moreover, current research in probiotics and health consciousness in the public lead to an increased interest towards probiotics from the public, researchers, governmental organizations (such as the WHO/FAO) and medicine and food companies. In this chapter, application of probiotics in treating various diseases and disorders are discussed.

Introduction

COVID-19, a worldwide pandemic, addresses a deflationary stun for the worldwide economy. The outbreak of coronavirus has had a significant impact on public health worldwide and all stages of various industries’ supply chain and value chain. The 2019 novel coronavirus (2019-nCoV) or the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is rapidly spreading from its origin in Wuhan City of Hubei Province of China to the rest of the world. The infection began in bats and was communicated to people by inhalation or contact with infected droplets, and its infection time frame goes from 2 to 14 days. Primary manifestations in hospitalized patients with COVID-19 include fever (98%), cough/hack (76%), and myalgia or weakness (44%). Severe complications include acute respiratory distress syndrome (ARDS), RNAemia, acute cardiac injury, and multiple organ failure. However, exaggerated immune responses may lead to Cytokine Storm. Cytokine storm syndrome includes ARDS, shock, and multi-organ failure (Zheng et al., 2020). Many people are asymptomatic also, and the severity of this disease varies from person to person. The fatality rate is estimated to range from 2 to 3%. Typical/low white cell checks can analyze it with raised C-responsive protein (CRP), periodic modernized tomographic chest examination. The infection spreads quicker than its two predecessors, the SARS-CoV and Middle East respiratory disorder Covid (MERS-CoV); however, it has lower casualty. The worldwide effect of this new scourge is yet questionable (Singhal, T. (2020).

Abstract

The present study was conducted to develop ready to eat extruded snack food based on germinated flour of wheat, Bengal gram and green gram. A Central Composite Rotatable Design (CCRD) for five variables at five levels was used for experimental combinations and optimization of the process parameters. Experimental design with green gram flour (5 to 20%) and bengal gram flour (1535%) in wheat flour, moisture content (14-18%), screw speed (200-300 rpm) and barrel temperature (126-134°C) as independent variables having 32 different combinations of snack formulations that were studied using response surface methodology to investigate the effect of these variables on product responses (Lateral expansion, bulk density, Water absorption index, water solubility index and sensory characteristics). Sensory analysis was carried out of all extrudates for texture, color and overall acceptability. Multiple regression equations were obtained to describe the effects of each variable on product responses. The optimum operating conditions for development of germinated wheat, green gram and Bengal gram flour extrudate were 132°C of barrel temperature, 275 rpm of screw speed, 17 % offeed moisture, 6.5% of green gram flour and 23.1% of Bengal gram flour. The responses predicted by the software for these optimum process conditions resulted lateral expansion of 169.59%, bulk density, 0.263g/cm³; water solubility index, 19.08; water absoption index, 13.88g/g; and overall acceptability value of 7.38.