eChapters

Introduction

Whey is the serum or watery part of the milk that remains after separation of curd that result from the acid or proteolytic enzyme mediated co-agulation of milk. It is major by product of dairy industries manufacturing products like channa, paneer, cheese and chakka (Sharma and Bhatia, 1999).The current world production of whey is estimated at about 165 million tones, in that cheese whey accounts for nearly 95 % of total whey. In India near about one million tonne of whey is annually derived, in that major source of whey is from the production of channa, paneer and shrikhand production. This is mostly thrown away as a waste which creates environmental pollution, also in that way about 70, 000 tonnes of Nutritious solids are lost (Puranik, 1999).

11.1 Introduction

Fermented foods are the result of the activity of a few specialized types of micro-organisms among the thousands of species known to mankind. Success of such processes is depended upon the control of environmental conditions ensuring the growth of the desired microbial species and inhibition of others. The fermentation can be broadly defined as the process in which the carbohydrate or like compounds are broken down, under anaerobic or aerobic conditions [171]. The basic role of micro-organisms is to breakdown the organic compounds to get energy for their metabolic activities. From ancient times, people all over the world have developed traditional processes for production of alcoholic beverages (wine) either from natural sugar such as in wine or by degrading the starchy materials (beer). Fruit wines referred to as ‘Soma’ in our ancient scriptures have been part of food of man and were used as medicine, might have originated accidentally (transformation of fruit juice beverages having exhilarating or stimulating properties). Wines are made principally from fruits like grape or extract of other fruits of various types (table wine, sparkling wine, dessert, aperitif or vermouth and pop wines) while the beers are prepared from grains like barley, rice and corn. The principal carbohydrate in grain is starch which can not be fermented directly. This process is brought about by starch splitting enzymes by germinating the grains followed by drying and storage until needed. Distillation of beer produces a variety of liquors (whisky, rum, gin, vodka), while that of wine produces the brandy. Besides, the improvement in the raw material selection, fermentation conditions and techniques, a lot of waste material is generated during fermentation process in the industries. Nevertheless, the food based industries are significant contributors to the economy of the many countries of the world (Fig 1). The global market value of food fermentation based industries is estimated to be around 250 million US dollars. Interestingly, more than 10% of this accounts for alcoholic beverages (Fig 2) with projected increase of US$ 27 billions in 1989 to 40 billions in 1990 [93,123,123,129].

1. INTRODUCTION

Wild fruits are highly nutritious and contain vitamins, carbohydrates, protein and minerals in higher quantity than majority of other common cultivated fruits. They are also a rich source of several bioactive substances, compared to the cultivated fruits. In India,these wild fruit trees grow abundantly across an altitudinal gradient of Himalaya and the majority of them bear fruits during summer. Fruit varieties are consumed by the local inhabitants of the region. At the same time, there are numerous under exploited species of wild fruits having high potential for exploitation viz., Bael (Aegle marmelos CL.), Berberis asiatica DC, Seabuckthorn (Hippophae sp.,) Rubus sp., Prunus armeniaca L., Karonda (Carissa carandas L.) Bitter Almond (Prunus amygdalus Batsch Smith), Feijoa sp. Among the wild fruits, Hippophae sp.was found to be economically efficient, followed by Aegle marmelos, Rubus ellipticus Smith, respectively. Wild apricot (Prunus armeniaca L.), a semi-domesticated and less utilized fruit of the higher Himalaya, provides better economic returns on an annual basis. Attempts have been made to utilize these wild fruits as a source of income, particularly for poor rural inhabitants and unemployed youths of the region by making a variety of edible products such as jam, jelly, juice, squash, sauce, wine etc. Here in this article, production of wine, vermouth and brandy from wild fruits would be focused. But before discussing preparation of wine and brandy in detail, we shall be describing the general process of wine and brandy making first, then the products from the specific wild fruits.

Vacreation: The pasteurization of the milk or cream under reduced pressure by direct steam is called vacreation. This process removes feed and other volatile flavors from cream and to pasteurize it for butter making. This is also called vacuum pasteurization (Plate 623).

Vacuum: The state of negative pressure. It is equal to atmospheric pressure minus absolute pressure.

Vacuum cooling: A technique of cooling vegetable (leafy vegetables, asparagus, brussels sprouts) having a high surface to volume ratio; rapidly and uniformly by boiling off some of their water at 10C and at low pressure (5 mm of Hg) into a sealed container. The produce is cooled by evaporation of water from the tissue surface and is more rapid than hydro cooling (Plate 624).

Vacuum drier: A drier used to dry heat sensitive products where low pressure lowers the temperature, helps to retain natural flavour and minimizes oxidation and browning is called vacuum drier (Plate 625).

Abstract

Drying is an age old practice of food preservation. Removal of moisture from the food materials is usually carried out at atmospheric pressure and elevated temperature. In the presence of oxygen, drying can cause oxidation of some compounds leading to quality deterioration. Drying at higher temperature adds to the losses and can be responsible for enzymatic and non enzymatic browning, loss of aroma, nutrients, antioxidants, pigments etc. On the other hand, drying under sub atmospheric pressure helps in retaining the themosensitive compounds present in natural foods as drying can be accomplished in oxygen free environment. Under vacuum, evaporation of moisture can be possible at lower temperatures.

Lanolin, commonly known as Wool grease is primarily a lipid secretion from sebaceous glands of wool bearing animals. The role of Lanolin in nature is to protect wool and skin of animal from climate and the environment. It is an excellent emollient, self-emulsifying and dermatological safe for skin applications. Lanolin is a complex matrix since it is a mixture of high molecularweight esters of fatty acids with fatty alcohols, sterols, tri-terpene alcohols; diesters, long-chain alcohols & diols, long-chain fatty acids and hydroxy acids and is therefore difficult for effective matrix clean-up. Because of its water proofing and antimicrobial properties, lanolin is used mainly in cosmetic and pharmaceutical applications.

ABSTRACT

Approximately 30 % of fruits and vegetables are getting wasted each year in country like India. Not only that, there is a huge loss of agro based commodity during industrial processing and will be considered as industry generated waste. Utilization of such unexplored nutrients from agro processing sectors for making a sustainable food system will be a healthy approach to bring food security and nutrition to all of us. With this aim the present work addresses the utilization of jackfruit seeds, an agro-waste, to value added products. Jackfruit seed flour has a great potential in new food formulation along with wheat flour. The 15% (w/w) blending of jackfruit seed flour with wheat flour could be used in bread and the substituted bread is protein and fibre enriched. This attempt in developing such bakery items with blended flours could address the scarcity problem of non-wheat producing countries. Present study also looks into the alternate source of starch from spice processing industries. The nutrient starch could be explored for isolation from a nonconventional source from turmeric processing sector. The isolated starch could also be modified to enhance some of its functional properties and may be utilized in preparing value added product with a better acceptability and nutrition.Thus, the isolation of nutrients and value-added products out of fruits and vegetables and spice-processing waste would be a stepping stone to an initiative to zero hunger.

Abstract

Mango pulp is high in prebiotic dietary fibers vitamin c, polyphenols, carotenoids, vitamins and dietary minerals. Mint leaves are known for its medicinal aromatic and flavorsome qualities. Mint act as powerful antioxidant, protecting the body against the formation of cancerous cells and is rich source of polyphenolic compounds. Tulsi also have antioxidant, adaptogenic, anti-inflammatory, antibacterial and immune-enhancing properties. Honey is natural sweetener and has antiseptic and antibacterial properties. Medicinally, honey is non irritant promote rapid growth of healthy tissue and is useful in purities value, bed spores, skin and intestinal disorder, etc. Keeping in mind the beneficial effects of these raw materials, attempt was made to prepare value added drink from it, which may have medicinal value and good sensory acceptability with objective to prepare and evaluate the recipe for value added green mango-mint-tulsi beverage and to study the shelf life of the developed value added beverage. The formulation prepared with partial substitution of honey was more acceptable. Throughout the storage period, the squash prepared with honey scored more in flavor, taste, mouth-feel and overall acceptability than without honey. The cost of production without including labour, bottling and other overhead charges came out to be Rs. 34.5/L for squash without honey and Rs. 59.0/L for squash without honey.

1. INTRODUCTION

Food processing industries are engaged in production of different types of processed products and generate various types of wastes. These wastes, whether solid or liquid, on one hand are a direct loss to the producer or manufacturer and on the other hand create environmental pollution, if not disposed properly. Therefore, the processors would always like to minimize these wastes. The generation of wastes not only cause economic losses but would also require additional cost for their management and disposal. As a matter of fact, it is often estimated that proper use of efficient machinery and careful handling during various operations can lead to more than 50% reduction in losses.

In general, the wastes from the food processing industries are either not utilized or primarily utilized as animal feed, fertilizer and in preparation of by-products on a limited extent. Many of the wastes such as cuttings and shreds from the fruit and vegetable processing industry can be used as animal feed. Fruit and vegetables wastes can also be used for extraction of starch, pectin, natural colouring matter, fat, essential oils etc. Wheat and maize bran alongwith palm kernel are used for the production of feed for chickens. Various oils and oleoresins having enormous pharmaceutical properties can be obtained from the spice processing industry.

Fermentation is a cheap and energy efficient means of preserving perishable raw materials. It commonly does not require any sophisticated equipment, neither is the storage of fermented products a big issue. Fermented foods play an important role in providing food security, enhancing livelihoods and improving the nutrition and social well being of millions of people around the world, particularly the marginalised and vulnerable population across the developing countries.

Several products of fruits and vegetables are prepared on commercial and home scale. Products development from fruits and vegetables is the best way to utilize excess produces and save them from post harvest losses..

Value Addition

This is the process of improving the value of a commodity through processing by changing its form, increasing its shelf life or better presentation like packaging. Value addition can be done through the ways.

In monetary terms, value-added’ per unit of the product is the margin between its selling price and cost of production. However, in the dairy and food industry, value addition refers to, extra, features of a product that are beyond the expectations of a consumer at little or no extra cost. In this context, the addition of value to milk can involve monetary value added to a liter of milk by turning it into milk products, enhancing the convenience of quality, shelf life, or health characteristics using processing and packaging interventions.

4.1. Conversion of Milk into Conventional Products

It is an age-old tradition to add value to milk by processing it into milk products. The primary aim was to increase the shelf life of milk that would otherwise be highly perishable. With inadequate facilities to preserve liquid milk fresh in the rural areas’ conversion of milk into a variety of milk products would be an ideal option to effectively preserve the huge quantities of milk procured during the flush season’ In the processing of milk products such as cream, butter, cheese and ghee, by-products such as skim milk, buttermilk, whey, and ghee residue are obtained’ Many of the dairy plants, particularly in India’ are usually confronted with the problem of by-products utilization, especially that of whey and ghee residue in an economical manner. Membrane separation processes have presented new possibilities for the production of newer intermediate products from dairy by-products that can be used for value addition in dairy and food industries.

Abstract

30 lines were selected from 864 germplasm lines for good biscuit making attributes on the basis of low protein content (<10.5%) and low sedimentation value (<40cc). These lines were further screened by actual baking test and alkaline water retention capacity (AWRC) test keeping the standard prescribed for biscuit making qualities viz., low protein content, low sedimentation value, low AWRC and larger diameter with larger spread ratio of biscuit. AWRC had significant negative correlation with biscuit spread ratio. Positive significant correlation was found between biscuit spread ratio and biscuit diameter. On the basis of above findings, it may be recommended that low protein content, low sedimentation value, low AWRC may be used as criteria for better biscuit making i.e. increase biscuit spread ratio and biscuit diameter. So wheat-breeding programme has opened up new opportunities for the end use quality product and wheat based food industry. Hence there is an urgent need for qualitative analysis of desired traits in wheat towards enhanced value addition and thereby an attempted has been made to identify suitable genotypes possessing good biscuit making attributes

This chapter introduces value addition as a means of converting eggs from a commodity into convenient, shelf-stable or specialized food products. It covers ready-to-eat eggs, hard-cooked eggs, pickled and marinated eggs, egg-based snacks, specialty products, emulsified products and mayonnaise. Region-specific and ethnic egg products of India are also discussed. The chapter introduces product development, sensory evaluation, packaging and retort processing. It emphasizes the commercial potential of value-added products while recognizing the associated requirements for food safety, processing control, market acceptance and appropriate packaging.

Milk, as secreted in the udder of a healthy animal is practically sterile, but during its transit to the processing plant, becomes heavily contaminated with a variety of micro-organisms. These may be responsible for spoilage of milk or for causing diseases in animals and human beings. It thus becomes imperative that adequate heat treatment is given to milk to destroy these micro-organisms, thus increasing the shelf-life of milk as well as making it safe. Varied heat treatments offer the potential of producing different kinds of processed milk to satisfy the needs of the consumer. To cater to the ever-increasing demand of consumers, several varieties of processed milk are available in the market, some of which are discussed below.

5.1. Pasteurised Milk

Pasteurisation was named after the renowned French scientist Louis Pasteur, who discovered that spoilage organisms could be inactivated in wine by applying heat at temperatures below its boiling point. The process was later applied to milk and remains the most important operation in the processing of milk.

It is the process by which every particle of milk is heated to such temperature-time combinations (usually to 63°C for not less than 30 minutes or to 72°C for not less than 15 seconds) and promptly cooled to 4°C or below so as to destroy any harmful bacteria that may be present without affecting flavour and food value. Pasteurisation does not involve the use of any additives. Apart from making milk safe to drink, pasteurisation increases the length of time it can be kept before it spoils. The nutrient losses due to pasteurisation are so small, that they are considered insignificant.

ABSTRACT

Microencapsulation is one of the latest technologies used in the food, pharmaceutical, nutraceutical and cosmetic industry where it is used for maintaining the stability of the food ingredients and slow release of the active food ingredients. For many decades the encapsulation technique was used in the pharmaceutical industries, but from last three decades it has been effectively used in the food industries showing enhanced results in flavour masking and retention of bio- active components present in the food. The production of the microcapsules can be achieved by the various process technologies. The process technologies have been reviewed in this paper such as spray drying, extrusion, spray chilling, emulsions, fluidized bed coating, freeze drying, molecular inclusion, crystallization, co-acervation etc. the encapsulation of food materials has shown a promising result in the newly growing food processing industries. Some of the recent developments in the microencapsulation viz. sweetener immobilization, controlled release and the carrier materials are also being presented in the reviewed paper.

1.3 Dextrose

Sweets which include dextrose have different eating qualities to those made with sucrose and glucose syrup alone. Recipes should be balanced so that the sucrose to dextrose ratio achieves the required product texture.

The incorporation of dextrose will increase the likelihood that crystallization will occur either on store or during manufacture. Replacement usage levels for dextrose normally lie between 5% and 15% of the Sucrose content

Procedure: weigh vegetables 20 g (for each variation) Water: add sufficiently
1. Cook the vegetable in water in a pan according to the “cooking time” variations given in the table 1 and note down the color, texture and flavor changes takes place during cooking for each variation and record the observations

INTRODUCTION

Vegetables and fruits have many similarities with respect to their composition, methods of cultivation and harvesting, storage properties and processing. In fact many vegetables are considered fruits in the true botanical sense. But the difference between the two is that vegetables are derived from various parts of plants e.g. roots, leaves, stems, buds and so on whereas, fruits are the mature ovaries of plants with their seeds. The edible position of most fruits is the freshly part of the pericap or vessel surrounding the seeds. The other difference between the two is that those plant items that are generally eaten with the main course of a meal are often considered to be vegetables, whereas those that are eaten alone or as a dessert are considered as fruits. This is the distinction made by food processors, certain marketing laws, and the consuming publics.

SYNOPSIS

Food is any substance consumed to provide nutritional support for the body. It is usually of plant or animal or fish origin. Plant foods are the most abundant sources of nutrition on earth. Only plants contain powerful substances called phytochemicals, which protect us from cancer, heart disease, and an array of other serious illnesses.

A dilute solution of acetic acid produced by a two-stage fermentation process in the first stage, fermentable sugars is converted into ethanol by the action of yeasts and in the second stage, bacteria of the genus Acetobacter oxidize the ethanol to acetic acid.

Vinegar is a liquid produced from the fermentation of ethanol in a process that yields its key ingredient, acetic acid. The acetic acid concentration ranges typically from 4 to 8 percent by volume for table vinegar (typically 5%) and higher concentrations for pickling (up to 18%). Natural vinegars also contain smaller amounts of tartaric acid, citric acid, and other acids.

A five-kingdom classification system fails to classify viruses because they are not considered to be living. They neither reproduce independently nor utilize energy

General properties of virus

Viruses differ fundamentally from other classes of microorganism in that:

1.They are ultramicroscopic disease-producing entities.

2.They are simple in structure, basically composed of nucleic acid wrapped up in a protein coat.

3.The genome nucleic acid is either DNA or RNA , either single stranded or double stranded, but never both

4.Viruses have no metabolic activity of their own and lack enzyme systems and other constituents fundamental for independent growth and multiplication.

5.They do not posses ribosomes, nor transfer RNA and enzymes required for synthesis of nucleic acids and proteins.

6.Viruses are incapable of growth and division.

Materials Required

Record book

Procedure

    1.    Follow the instructions given by the teacher and the factory representative.
    2.    Listen carefully to the explanations of the factory representative
    3.    Observe the functioning of various equipments
    4.    Ask queries wherever not understood properly.
    5.    Note down the observations in your record book  

Observations

    1.    Name and address of the factory or processing unit
    2.    Size of the Unit (Large, Small, Cottage, Home)
    3.    FPO Licence No.    
    4.    List of products manufactured    
    5.    Height of the processing plant    
    6.    Information regarding raw material store, finished product storage    
    7.    List of equipments installed in the factory
    8.    Water supply system     
    9.    Waste disposal system    
    10.    Hygiene in the surroundings    
    11.    Any other

Vitamins are naturally occurring, vital nutrients that are needed in small amounts. They are important for bone and tissue health, wound healing, growth and development, immune system function, and other biological processes. These vital organic substances serve a variety of biochemical purposes. Vitamins, like minerals, are not biosynthesized by the body. Consequently, in order to maintain our health, we must obtain them from the food we eat or, in rare circumstances, supplements.

Vitamins in Milk

Together with water- soluble vitamins like vitamin C and B complex and provitamins, milk also contains a variety of fat- soluble vitamins like A, D, E, and K. Some of these vitamins do, however, have very low concentrations.

Vitamin A (Retinol)

Plant foods contain carotenoids, which are the precursors of vitamin A, whereas animal foods provide preformed vitamin A in the form of retinyl esters.

Introduction

The basic components of diet include carbohydrate, protein, fat, vitamins and minerals. Vitamins are the essential nutrients which are not formed in our body and required in minute amount from the diet. Vitamins are crucial for the optimal functions of several enzymes; thus important for optimal growth and development. Vitamins perform various functions that help in regulation of metabolism, prevent chronic diseases, maintain natural appetite, mental health and immunity.

In 1912, Polish biochemist Kazimierz Funk coined the term ‘vitamine’;a substance that was present in rice polishing and foods that cured polyneuritis in birds and beriberi in humans. The name is from ‘vit’ for vital nutrient and ‘amine’ for its similarity as an amine. Vital signify that these factors are indispensable for life. Earlier they are identified and thought to contain amino groups, thus the word amine was used, which was true for thiamine but later work revealed that most of the vitamins do not have amino groups. Thus the word was shortened to vitamin in English. It should be noted that the term vitamin does not denote to some othern utrients such as essential amino acids, essential fatty acids, dietary minerals or other nutrients that contribute towards good health.

Vitamins may be defined as organic compound needed in minute amount through diet to perform specific biological functions for normal growth and health of the organisms.Vitamins should have following characteristics:

A vitamin is an organic compound required by an organism as a vital nutrient in limited amounts. An organic chemical compound (or related set of compounds) is called a vitamin when it cannot be synthesised in sufficient quantities by an organism, and must be obtained from the diet. Thus, the term is conditional both on the circumstances and on the particular organism. For example, ascorbic acid (vitamin C) is a vitamin for humans, but not for most other animals. Supplementation is important for the treatment of certain health problems but there is little evidence of benefit when used by those who are otherwise healthy.

By convention, the term vitamin includes neither other essential nutrients, such as dietary minerals, essential fatty acids, or essential amino acids (which are needed in larger amounts than vitamins) nor the large number of other nutrients that promote health but are otherwise required less often. Thirteen vitamins are universally recognized at present. Vitamins are classified by their biological and chemical activity, not their structure. Thus, each “vitamin” refers to a number of vitamer compounds that all show the biological activity associated with a particular vitamin. Such a set of chemicals is grouped under an alphabetized vitamin “generic descriptor” title, such as “vitamin A”, which includes the compounds retinal, retinol, and four known carotenoids. Vitamers by definition are convertible to the active form of the vitamin in the body, and are sometimes inter-convertible to one another, as well.

Vitamins have diverse biochemical functions. Some, such as vitamin D, have hormone-like functions as regulators of mineral metabolism, or regulators of cell and tissue growth and differentiation (such as some forms of vitamin A). Others function as antioxidants (e.g., vitamin E and sometimes vitamin C).

1. The disease Beri - beri is caused due to deficiency of vitamin
   1. D
   2. C
   3. B
   4. A
2. Which of the following vitamin is found in Fish liver oil?
   1. Vitamin D
   2. Vitamin C
   3. Vitamin K and C
   4. Vitamin A

Wafer: A thin crisp cake, candy, cracker or chips is known as wafer.

Waffle: A crisp cake of batter baked in a waffle iron is called waffle

Warner-Bartzler Shear: It is one of the oldest but commonly used devices used to measure the tenderness of meat. It is used to test the quality in the cooked meat (Plate 648).

Wastage: Wastage is a term that cannot be precisely defined by even moral value / judgment and defined on the context / situation on which it is used.

Waste water: Water that has been used in a manufacturing process and goes waste is called waste water.

Water: Water (H2 O) is a clear transparent, colourless, odourless and tasteless liquid; neutral in reaction; boils at 100oC, freezes at 0oC and has maximum density (1 g/cm3) at 4oC. It exists as snow, ponds, lake, rivers, seas, oceans etc., also occur as rain and is there in the form of moisture in atmosphere. Pure water is bad conductor of heat and electricity. Water is an essential part of the body structure as a carrier of nutrients and regulator of a number of body functions. Fruit and vegetables contain > 80% water and sometime upto 95% water e.g. cucumber, lettuce, marrow, lettuce, melon. The starchy tubers and seeds, for example yam, cassava and cork, contain less water, but even > 50%. So water content must be optimum at the harvesting time. The human body comprises of about 65 % water, while that of fruits and vegetables 80-90% water.

Introduction

A variety of glassware, plasticware, and other apparatus are used for experimental purposes in a laboratory. They need to be washed, cleaned, dried, and sometimes sterilized before they can be used in the next set of experiments. Glassware needs special care of handling during washing, drying, sterilization, etc. because even a minor mistake in handling of glassware may result in its cracking/breakage and it may become unserviceable. All of these may result in a delay in experimentation if spare piece of the glassware is not available or it may affect serviceability of the associated apparatus.

A large number of glassware such as beaker, flask, measuring cylinder, burette, test tube, etc. are regularly used in a laboratory, which requires careful handling during the different stages of experiment as well as after completion of the experiment while preparing them for another set of experimentation.

Glass being a complex silicate, its properties depends on the type of silicate anions in the structure and the cations formed. Thermal properties of glass changes by the addition of boron oxide (B2 O3 ); hence, borosilicate glass is extensively used in the laboratories. With this brief background information, let us discuss about the necessity, procedures, and precautions during washing, cleaning, drying and sterilization of laboratory-wares. Figure 3.1 shows various advantages of using borosilicate glass in a laboratory.

Good laboratory practices require clean glassware, because an experiment may give erroneous result if dirty glassware is used at any step of the experiment. Hence, the glassware must be physically and chemically clean; and in many cases, it must be microbiologically clean or sterile. The commonly used glassware in a laboratory include test tube, measuring cylinder, pipettes, beakers, flasks, microscopic slides, etc.

Introduction

Wastes produced during fish processing operations can be solid or liquid. Solid wastes consist of skin, viscera, fish heads, fish bones, and scraps of f lesh. Liquid wastes are the blood water and brine from drained storage tanks, water discharges from washing and cleaning, blood and soluble substances from entrails, and detergents and other cleaning agents. The effluent from the processing of fatty fish contains very high levels of oil. Overall, the wastewater from fish processing operation contains an undefined mixture of substances, mostly organic in nature.

13.1. Physicochemical Parameters of the Wastewater

13.1.1. pH

The pH is an important parameter that reveals contamination level before biological treatment. The effluents from fish processing plants are usually close to 7 or alkaline, due to decomposition of the proteinaceous matter and emission of ammonia compounds.

13.1.2. Solids Content

Solids may be present either in dissolved or suspended form. Suspended solids are objectionable as they settle in the wastewater ducts reducing their capacity or settle in the waterbody affecting bottom - dwelling flora or sometimes float reducing the light entering from the surface or remain suspended reducing the amount of light that enters the water. The settling solids are measured using an Imhoff cone. If the wastewaters contain solids that settle after 10 min, their discharge is usually not permitted. The suspended solids are measured by passing a sample through a fiberglass filter; and determining the quantity by gravimetry, after evaporation of a known volume of the filtrate.

Waste is defined as anything that doesn’t add value to their operations. To the average person, waste is simply stuff that’s unwanted or useless. But from a scientific perspective, there’s really no such thing as waste. Nearly all the things we throw away can be transformed or processed in ways that make them useful again.

Waste comes in various forms, ranging from household trash to industrial byproducts. These include domestic waste, factory waste, e-waste, construction waste, agricultural waste, and more. We can categorize waste into different types:

Solid waste: This includes organic materials like vegetable and kitchen waste, as well as general household waste.

E-waste: Discarded electronic devices such as computers, TVs, and music systems fall into this category.

Liquid waste: This comprises water used in various industries, as well as waste from tanneries, distilleries, and thermal power plants.

Plastic waste: Items like plastic bags, bottles, and containers make up this category.

Diverse categories of Food Products such as canning, preservation of fruits and vegetables, processing of poultry products, dairy goods and many more present different challenges for wastewater disposal and regular use of water. A significant source of environmental pollution is the dissipated water generated from food product development and other agricultural tasks. This waste is being considered the most strenuous and requires a high amount of capital to convert this waste into reusable waste and the main reason behind this is different nutritional components such as inorganic and organic carbon compounds, nitrogenous elements, suspended and dissolved solids, high amount of biochemical and chemical oxygen demands (BOD & COD).

Abstract

Pulses being nutritionally vital, is an important constituent of diet for a very large number of peoples. A part from being a relatively cheaper source of dietary protein, it is also an important source of calories, certain essential amino acid, minerals and vitamins. Post harvest scenario of pulse shows that 75 per cent of production was milled in pulses with as dehusked split i.e. dal. Traditionally green gram and black gram dal is dehulled manually after soaking in water. Present investigation was carried out to develop the wet type dehuller and study was carried out on water absorption characteristics of green gram and black gram. The result reveals that the dehulling efficiency of abrasion type mechanism was about 95 per cent and 92 per cent in case of shearing type mechanism. It has been observed that rate of water absorption was initially high and then gradually decreases i.e. 0.54 to 0.18 and 0.48 to 0.18 for black and green gram, respectively. 

    1.    Water activity (a_w) affects food chemistry and can be controlled by removal (dehydration or drying) or by chemically binding the water, reducing its activity. Water activity in foods ranges from 0.95 to 1.00 in fresh meats and vegetables to 0.20 in dried milk.

    2.    Water activity (a_w) may be defined in a number of ways, qualitatively, aw is a measure of unbound, free water in a system available to support biological and chemical reactions.

    3.    Water activity, not absolute water content, is what bacteria, enzymes, and chemical reactants encounter and is affected by at the micro environmental level in food materials.

    4.    Two foods with the same water content can have very different aw values depending upon the degree to which the water is free or otherwise bound to food constituents.

    5.    The term “water activity” is related to relative humidity. Relative humidity is defined as the ratio of the partial pressure of water vapour in the air to the vapour pressure of pure water at the same temperature.

    6.    Water activity or aw is a property of solutions and is the ratio of vapour pressure of the solution compared with the vapour pressure of pure water at the same temperature. Under equilibrium conditions water activity equals:

1. Natural Mineral Water- Food Safety & Standard Regulations - 2011 and IS 13428:2005 Reaff. 2009 requirements
2. Packaged Drinking Water other than Natural Mineral Water- Food Safety & Standard Regulations - 2011 and IS 14543:2004 Reaff. 2009 requirements
3. Water for processed Food Industry- IS 4251 : 1967 Reaff. 1992 requirements
4. Drinking water- IS 10500 : 2012

Introduction

Water is not only a vital environmental factor to all forms of life, but it has also a great role to play in socio-economic development of human population. Since antiquity humans have valued the importance of clean water and have used various techniques to improve its quality. In modern times, the safe drinking water became first a public health issue and then a human rights issue. The access to safe drinkin gwater now considered as a basic human right which is an essential component of effective policy for health protection. Improving access to safe drinking-water can result in tangible as well as intangible benefits to health. It has been shown that investments in water supply and sanitation can yield a net economic benefit, because the reductions in adverse health effects and healthcare costs outweigh the costs of undertaking the interventions (WHO, 2017). Past experiences have also proved that interventions in improving access to safe water favour the poor in particular, whether in rural or urban areas, and can be an effective part of poverty alleviation strategies. The disparity in water availability, reliability, and quality between the developed world and developing countries is enormous. Unfortunately, in many developing countries people lack access to safe water and therefore waterborne diseases are still a major cause of death, especially among children under age of 5. According to a joint report by World Health Organization (WHO) and United Nations International Children’s Emergency Fund (UNICEF) (WHO/UNICEF report 2017), around 2.1 billion people worldwide lack access to safe and readily available water at home, and around 4.5 billion, lack safely managed sanitation facilities. Moreover, many of these countries that have set drinking water standards often lack the resources to implement or enforce them.

12.1 INTRODUCTION

Water is a factor of prime importance in agriculture industry. Water management is one of the largest and most important inputs into an orchard. An efficient water management refers to artificial application of water, i.e., irrigation in crop root zones in case of soil moisture deficit and removal of water, i.e., drainage from the root zone in case of excess so as to provide the crops a most optimum soil moisture regime for best production. It means how best we are in irrigating and dewatering our fields so that plants are protected from stress as well as water logging (Goswami, 2015). Water resources are continuously overburdened with excessive drafts and water sources are shrinking at faster rate. Groundwater levels are falling at the rates faster than ever. Under this type of circumstances, judicious use of water should be given due attention for water conservation and also in increasing water productivity. Area under horticultural plantations is increasing at exponential rate. The unproductive uplands and low productive midlands and lowlands are brought under fruit based horticultural plantations. For a profitable orchard enterprise, a well-planned irrigation system and efficient water management practice are of utmost importance. Horticultural sector, which includes vegetables, f lowers and fruits, has enormous potential for development owing to varying agro-climatic conditions in India. There is tremendous scope for increase in productivity and quality of horticultural crops, which is necessary to compete in this modern competitive world market. There are many production technologies available to increase the per unit vegetable production and also to increase its quality. One of the widely acceptable, reliable and cost- effective technologies is pressurized irrigation.

Water is an essential component of all living things. Although once believed as a resource with a never-ending supply, it has now been understood that water is becoming increasingly scarce and therefore a proper management is necessary to keep a sustainable food production (Kannan & Anandhi, 2020). A continuous and safe supply of water is indispensable for the food industry where it has numerous applications along the agriculture and food production processes.

Abstract
India shares one fourth of global annual grain legume production and is also largest consumer of it. Weeds are the most severe and widespread biological constraint on agricultural production systems and cause damage to cropped and non-cropped lands. They reduce crop yield and degrade the quality of the produce, besides raising the cost of production. The grain legumesare commonly grown under rainfed/dry land conditions and hence do not receive the best management practices that are required for maximization of crop productivity. Among various production inputs, weed management was found to be the most important one contributing about 31% in pigeon pea, 110% in urdbean and 60 % in mungbean towards total productivity. Effective weed management in grain legumes is essential for optimizing
crop yield and quality. This process involves a multi-faceted approach that integrates cultural, mechanical, and chemical methods to address the challenges posed by diverse weed species and varying environmental conditions. Traditional single-method approaches often fall short due to the complexity and variability of weed problems like development of resistance in weeds. Therefore, an integrated weed management approach becomes effective, combining timely interventions with adaptive strategies to manage weed competition throughout the growing season. This approach not only enhances crop competitiveness and yield but also offers economic and environmental benefits by reducing reliance on broad-spectrum herbicides and promoting sustainable practices. Continuous monitoring and adjustment
of weed management strategies are crucial to effectively tackle evolving weed populations and changing conditions, ensuring long-term success in grain legume cultivation.
Keywords: Broad-spectrum herbicides, Crop productivity, Crop weed competition, Grain legume, Integrated weed management

13.1 INTRODUCTION

Weed is defined as an unwanted plant growing at a place where it is not desired. Weeds are unwanted and undeserved plants that interfere with the utilization of the land and water resources and thus adversely affect crop production and human welfare. Thus, a plant out of its place or a plant growing where it is not desired at that time is a weed. Weed has no species, but name was suggested as a useless and harmful plant that persistently grows where it is quite unwanted. According to Jethro Tull, the father of Weed Science, weed is defined as the unwanted, undesirable plant, growing out of their proper place, which interfere with the utilization of natural resources, prolific, persistent, competitive, harmful and even poisonous in nature and can grow in adverse climatic conditions. Of the total losses caused by pests, weeds have a major share (30%). They reduce the crop yield and decrease the quality of produce and hence reduce the market value of the turnout. Weeds are a major problem to horticultural production as they take advantage of their initial slow growth rate. Weeds reduce crop yield, lower their quality, act as alternate host of many pests/diseases and also have allelopathic effects on crops. Weeds also interfere with vital farm operations like weeding, fertilizer application, herbicide application and harvesting. Both annual and perennial weeds are common in their actions reducing the productivity of fruit trees. Weeds also provide shelter to various pathogens by becoming an alternate or collateral host of invaded crops by a number of fungal, bacterial and viral diseases.

The worst weeds found in the world are Cyperus rotundus, Cynodon dactylon, Echinochloa crusgalli, Echinochloa colona, Eleusine indica, Sorghum halepense, Imperata cylinderica, Eichhornia crassipes, Portulaca oleracia, Chenopodium album, Digitaria sanguinalis, Convolvulus arvensis, Avena fatua, Amaranthus hybridus, Amaranthus spinosus, Cyperus esculentus, Paspalum cojugatum, Rottboelia exaltata (Rana and Rana, 2016). All of these weeds are found in India. It has been reported that about 36-42% losses may occur due to inadequate management of weeds in apple (El- Metwally and Hafez, 2007). Therefore, management of weeds in all agro-ecosystems is crucial to sustain our crop productivity and to ensure the food security to the rapidly increasing population.

Abstract
Legumes are an excellent group of fertility restorer crops which can be grown either as sole crop or as a component crop in the cropping system. As they are tolerant to drought condition, they can be grown throughout the year. The yield of legume crop is largely depending on pest, diseases and weeds. Among these weeds plays a major role as the weed seed bank inside the soil influence the weed population in the cropping season. Hence it is important to manage the weed seed bank for better productivity of legumes. Though legumes are short duration and fast growing crops, the germination percentage of weed seed bank will determine the final yield of legumes. There are many strategies to which the weed seed bank can be controlled to tolerable level before which the weed seed bank present in the soil has to estimate. Annual weed seed bank can be minimized by killing the weeds before they set seeds, harvest weeds, crop rotation, cover crops, inter cropping and ensiling. Weed seed bank depletion can be done by tillage, tricking the weed seeds, conditioning weed seeds, soil solarisation and herbicide application. Thus integrating various technologies may help in effective controlling of weed seeds to tolerable level thereby enhancing the yield of leguminous crops.
Keywords: Estimation of weed seed bank, legumes, tillage, yield, weed seed bank

Introduction

In a research laboratory, we frequently need weigh chemicals and prepare different solutions of varying strength, as per the requirements. Accuracy in weighing and preparation of solution, with respect to weight/volume and strength, determines the success of experiment. In turn, the accuracy depends on weighing of solid chemical and/or measuring the volume of liquid chemical/making up the volume. In this Chapter, weighing of chemicals using appropriate weighing balance, preparation of solutions of different strength, their dilution, and precautions while preparing will be discuss in brief.

Weighing of Chemical

The primary method to determine the amount of chemicals to be used is weighing the chemical by using a balance.

In general, there are two types of balances to weigh chemicals in a laboratory:

1. Standard laboratory balance

2. Analytical balance

Standard Laboratory Balance

Generally, a standard laboratory balance is used for weighing a chemical when an error of ±0.02 g is acceptable. It is also used for pre-weighing, where approximate mass needs to be determined. Precise mass of the chemical is then determined using an analytical balance. Following are the steps in using a weighing balance in a laboratory.

When certain disease-causing bacteria or pathogens contaminate food, they can cause foodborne illness, often called “food poisoning”. Foods that are contaminated may not look, taste or smell any different from foods that are safe to eat. Salmonella, Campylobacter, Listeria and Escherichia coli are common bacteria causing foodborne illness. Some foodborne illnesses are mild where most people get better within a few days, but illness can sometimes be more severe and fatal. Bacillus cereus can form heat resistant spores. On cooking the food with these spores the heat resistant toxin is left at room temperature. Reheating or lightly cooking the food does not destroy these toxins. Most types of foodborne illnesses cause symptoms like nausea, vomiting, watery diarrhea, abdominal pain and cramps. Fever and/or the presence of blood or mucus in the stool are signs of bacterial infection that may require a medical consultation. Proper food handling is vital to prevent most foodborne illnesses and diseases. WHO has given keys towards safer food which should be followed. Unsafe food containing harmful bacteria, viruses, parasites or chemical substances, causes more than 200 diseases which range from diarrhoea to cancers. Foodborne and waterborne diarrhoeal diseases kill around 2 million people worldwide annually, including many children. A single foodborne bacterium can grow into more than two million bacteria in just seven hours under the right conditions. Foodborne pathogen called Listeria sp. can survive and sometimes grow on foods being stored in the refrigerator. Hepatitis A virus can cause long-lasting liver disease and spreads typically through raw or undercooked seafood or contaminated raw produce. It is estimated that more than 250 million people worldwide suffer food allergies. The boiling temperature (smoke point) of cooking oil is above 200 °C. The boiling point of water is 100 °C.

According to the World Health Day (WHO,2015) food contamination happens when food are corrupted with another substance. It can happen during the process of production, transportation, packaging, storage, sales and cooking process. The contamination can be physical, chemical and biological. Faulde et al., (2013) studied the infection caused to patients by mothfly

It is a discipline of science that describes handling, preparation and storage of food that can prevent food-borne diseases. When there are two or more cases of a similar illness from the ingestion of the same common food it is known as a food-borne disease outbreak (FSN, 2018). In order to avoid potential health hazards, food safety is very important. This needs safety between industry, market and the consumer. For food safety the labelling on food material is vital. This includes the origin of food, steps taken for food hygiene, food additives, pesticide residues, policies on biotechnology, food guidelines for the management of governmental import, export inspection and certification systems for foods. The food should be safe in the market with safe preparation and delivery of the food for the consumer. Foegeding et al., (1996) have done an assessment of risk factors with food borne pathogens.Warnock et al., (2007) have reported intervention to food safety.

When pathogens are in the food they may be transmitted to the consumer. It may result in an illness or death of the person or other animals. The pathogens include bacteria, viruses, molds and fungus. These multiply in the food medium. Joon et al., (2012) have found pathogenic bacteria in meat products of Korea. The developed countries have high intricate standards for the preparation of food; however, in the developing countries there are less standards and enforcement of the standards which are followed. Apart from food another major source of infection is water, which is very critical in spreading many diseases. It is possible to prevent food poisoning if good water is used for all purposes. However, it becomes difficult as in the food supply chain a large number of persons are involved apart from the fact that pathogens can be introduced into foods no matter how much precautions are taken. Cowden (2000) has studied the notification on food poisoning to improve health. Frenkel et al., (2015) studied the amount of wastes from food processing industries.

A process control system that identifies the hazardous points in the food production process is known as HACCP (Hazard Analysis Critical Control Point). It puts into place many stringent actions to prevent any hazards from occurring. In any food process if there is strict monitoring and controlling steps, the chances for hazards are minimum. Today, HACCP is an integral part of modern food industry that identifies and controls the major food risks. These are like microbiological, chemical and physical contaminants. These can also be practiced at home scale by checking proper storage, handling, cooking and cleaning procedures. These steps have resulted in industries taking greater responsibility for and controlling the food safety risk factors. This helps in better consumer protection, agriculture, the food processing industries and promotes domestic and international food trade.

The temperature of food storage is important. Below 4⁰C the food pathogens do not grow. Above 60⁰C some colonies begin to die. However, almost all die at 71⁰C. How hot is the food served is important for food safety. The size of the piece is important to how quickly it will cook all the way through. The smaller the piece the faster it will cook. Large or thicker pieces take a longer time to be cooked. Otherwise cooking for a longer time is better so that pathogenic microorganisms do not grow. In case of a thicker piece the color must be checked inside to outside after cooking which should be consistent. If the meat has the bone, check the color/temperature closest to the bone in the thickest part. In case of meat the contamination usually gets introduced while butchering and the practices used. The street food on a cart is perhaps the most contaminated as it has some level of bacteria in it. The meat in the decorated malls also has pathogenic bacteria. The environment plays a very pivotal role which can recontaminate the food even after proper cooking. The amount of harmful pathogens keeps growing in number with the passage of time. Fresh from the grill is the best, an hour or two is not ideal, half a day or overnight could make a person sick. Due to the reason that consumers do not know the time and temperature of cooking it is important to eat food which is freshly prepared.

Introduction

Bread wheat (Triticum aestivum L.) is one of the most widely cultivated and consumed crops in the world. Wheat is perhaps best known for its different end-use baking properties as determined by grain texture, protein content and quality. Wheat is generally traded by and classified into “hard” and “soft” market classes on the basis of grain hardness or texture of the wheat kernel (caryopsis). Soft wheats have softer endosperm texture that fractures easily, therefore requiring less energy to mill, yields smaller particles, and has less starch damage after milling when compared to hard wheats. Hard and soft are used with slightly different connotations in different parts of the world. In Western Europe, hard is applied primarily to durum wheats and the soft applied to bread wheat. Elsewhere the term is applied to different cultivars within the species Triticum aestivum. In general, hard wheats are used for bread baking, while soft wheats are used for cookies and cake making. Hard wheat requires more force to crack the kernel, maintains a larger particle size, passes through sieves more easily and has more damaged starch MacRitchie (1980). Higher starch damage is required for good bread making quality Tipples et al. (1994) but is detrimental to the biscuit making quality.

Abstract

Wheat is unique among cereals because of its ability to form viscoelastic dough. Variety of products such as leavened and unleavened breads, pasta, cookies, and breakfast cereals are prepared using wheat. The viscoelastic property of dough is mainly due to the presence of gluten proteins viz., gliadins and glutenins. Variations among these proteins play a significant role in determining the quality of wheat. Although considerable studies have been carried out on quantity and quality of protein and their relation to bread quality, very little work has been reported on their relation with quality of Indian traditional products like chapati and tandoori roti. Results indicate that ratio between gliadins and glutenins are important in determining the chapati quality. It has been found that varieties having 5+10 HMW glutenin subunits with IBL/ IRS chromosomes are more suitable for the preparation of chapati and roti. This article is focused on the relation between protein and its subunit composition and the quality of chapatti and roti quality.

Introduction

Carbohydrates constitute nearly 80% of the total dry matter of wheat kernel. Starch is the predominant form, with cellulose, hemicellulose and pentosans present in lesser amount. Starch is present in discrete granules within the cells of the endosperm. Starch content is available in the range of 65% to 75% and generally related negatively to the protein content. Starch structure is a crucial determinant of many end-product uses of wheat. While the amylose /amylopectin ratio is a useful descriptor of starch structure, a more complete analysis of the population of the molecules which constitute a particular starch is considerably more revealing. The molecules range from the high degree of polymerization (10⁷ – 109 glucose units) and heavily branched amylopectin population, to the lower degree of polymerization (103 -106 glucose units), and infrequently branched amylopectin population. Starches with widely differing structures are suited to particular end uses. For example, starches with no amylose, the so called waxy starches are particularly suited to use as thickeners or gel forming agents because they form a clear stable gel with little retrogradation. In contrast, starch with high amylose content form hydrogen bonded insoluble aggregations which are suited to use in adhesives, plastics and as a source of dietary-fibre starch. The size and branching pattern of starch are also important determinants of the suitability of starches for particular end-uses due to the effects these parameters have on gelatinization temperature, starch swelling and viscosity.