eChapters

A Scanning electron microscope (SEM) is a type of electron microscope that images a sample by scanning it with a high-energy beam of electrons in a raster scan pattern. The electrons interact with the atoms that make up the sample producing signals that contain information about the sample’s surface topography, composition, and other properties such as electrical conductivity.

The types of signals produced by an SEM include secondary electrons, back-scattered electrons (BSE), characteristic X-rays, light (cathodoluminescence), specimen current and transmitted electrons. Secondary electron detectors are common in all SEMs, but it is rare that a singlemachine would havedetectors for allpossiblesignals. The signals result from interactions of the electron beam with atoms at or near the surface of the sample. In the most common or standard detection mode, secondary electron imaging or SEI, the SEM can produce very high-resolution images of a sample surface, revealing details less than 1 nm in size. Due to the very narrow electron beam, SEM micrographs have a large depth of field yielding a characteristic three dimensional appearance useful for understanding the surface structure of a sample.

Nanotechnology has the potential to revolutionizethe agricultural andfood industry with newtools forthemoleculartreatmentof diseases, rapid disease detection, enhancing the ability of plants to absorb nutrients etc. Smart sensors and smart delivery systems will help the agricultural industry combat viruses and other crop pathogens. In the near futurenanostructured catalysts will beavailable which will increase the efficiency of pesticides and herbicides, allowing lower doses to be used. Nanotechnology will also protect the environment indirectly through the use of alternative (renewable) energy supplies, and filters or catalysts to reduce pollution and clean-up existing pollutants.

Over the past few decades, the fields of science and engineering have been seeking to develop new and improved types of energy technologies that havethe capability of improvinglifeall over the world. In order to make the next leap forward from the current generation of technology, scientists and engineers have been developing Energy Applications of Nanotechnology. Nanotechnology, a new field in science, is any technology that contains components smaller than 100 nanometers. For scale, a single virus particle is about 100 nanometers in width.

An important subfield of nanotechnology related to energy is nanofabrication. Nanofabrication is the process of designing and creating devices on the nanoscale. Creating devices smaller than 100 nanometers opens many doors for the development of new ways to capture, store, and transfer energy. The inherent level of control that nanofabrication could give scientists and engineers would be critical in providing the capability of solving many of the problems that the world is facing today related to the current generation of energy technologies.

People in the fields of science and engineering have already begun developing ways of utilizing nanotechnology for the development of consumer products. Benefits already observed from the design of these products are an increased efficiency of lighting and heating, increased electrical storage capacity, and a decrease in the amount of pollution from the use of energy. Benefits such as these make the investment of capital in the research and development of nanotechnology a top priority.

Nanotoxicology is the study of the toxicity of nanomaterials. Because of quantum size effects and large surface area, nanomaterials have unique properties compared with their larger counterparts

Nanotoxicology is that branch of bionanoscience, which deals with the study and application of toxicity of nanomaterials. The nanomaterials, even when they are made of inert elements like gold, become very active at a nanometer range. Nanotoxicological studies are intended to determine whether and to what extent these may pose a threat to the environment and to human beings. For instance, Diesel nanoparticles have been found to damage the cardiovascular system in a mouse model.

Human health and safety

Calls for tighter regulation of nanotechnology have occurred alongside a growing debate related to the human health and safety risks associated with nanotechnology. The Royal Society identifies the potential for nanoparticles to penetrate the skin, and recommend that the use of nanoparticles in cosmetics be conditional upon a favorable assessment by the relevant European Commission safety advisory committee. Andrew Maynard also reports that ‘certain nanoparticles may move easily into sensitive lung tissues after inhalation, and cause damage that can lead to chronic breathing problems’.

2.1 Introduction

Automation of agricultural field with IoT and microcontroller is new era of technology. Arduino based solution to agricultural field is open source platform. It can be used for developing data loggers and new sensors environment. The rate of solutions with Arduino and sensors is high as it is open source platform. The use of Arduino in agriculture can accelerate the growth of automation. Arduino can be interfaced with sensors like:

• Temperature
• Humidity
• Soil Moisture
• Water Pressure
• Water Flow and Water Metering
• Rain Gauge

5.1 Introduction

The chapter describes the development of local web server on the laptop, to control the actuator from the server. Web server is used as remote control for the system. The system is designed to control water pump with respect to the soil sensor values. It comprises of NodeMCU, soil sensor, LCD, two relay boards for pump in and out the water from field.

Abstract

The main aim of the article is to identify the strengths, weaknesses, opportunities and threats of current IPR system in context to Indian regime and also to understand overall planning as well as important tactics and means to use IP legal protection system to fully safeguard one’s legitimate rights and interests, obtain and maintain competitive edges, restrain competitors and seek optimal economic performance by selection of appropriate IP strategies. This article also proposes ways to select IP strategy based on BCG matrix and product mix.

X-ray diffraction (XRD) is an important experimental tool used in determining crustal structure of material system in bulk and nanoregimes. Therefore, it is important to understand the basic concepts of XRD.

Weed control in agriculture disturbs the farming. Weed management and control essentially increase productivity of the farm. Autonomous robots for weed control systems are gaining a lot of attention. Adaptability of effective weed control robots has the potential to bring evolution in the areas of weed species, genetics and climate conditions. Weed control is one of the major challenges in agriculture. Removal of weeds from farming land required a lot of human effort. To minimize the weed growth pesticides and chemicals are used which is very harmful. In order to make this process easy and reliable robots are used nowadays. Robots are specially designed to detect the weeds and remove them within a stipulated time period. Robots are programmed using various algorithms to do this task in an efficient way without human efforts. This chapter illustrates the use of modern robots in weed control to help the farmers to gain maximum profit and healthy concerns without using chemicals to do so.

10.1 Introduction

Over the time, weed control in a farming land has been an issue. Evolution in technologies in the area of agriculture brought a lot of innovations. Among these robots are one of the innovations to be implemented in agriculture to enhance profitability and reliability with minimum human resource. The robots are deployed to monitor the farming land from weeds and try to remove these. Due to which uses of agrochemicals reduced down the timeline. When precision farming came into the picture robots are the best use cases. An autonomous mechanical robot was used to remove the weed from farming land. Robots are equipped with sensor modules, actuators and IoT enabled which makes the things very easy to control from remote area with commands [4].

Theory

Heat required for heating greenhouses is based on the quantity of heat lost through different structural components of greenhouses per unit time. Shapes of greenhouse (A-frame and quonset) and structural components (roof, wall, gable, curtain wall, curved covering and end) are mainly influencing the calculation of heat requirement. The amount of heat lost from a greenhouse depends on glazing materials, exposed surface area of the house, inside desired temperature, outside existing temperature, wind speed, and condition of house (old, new, tight or loose). The outside temperature should be based on the lowest average expected temperature during the heating season.

Aim

To design of greenhouse cooling system

To determine the rate of air exchange in an active summer and winter cooling system.

Theory

Elevation factor (F_elev)

Elevation factor is directly proportional to the elevation. The values of elevation factors, used to correct the rate of air removal for a particular elevation. The rate of air removal from the greenhouse increase as the elevation of the greenhouse site increases.

Aim

To study the levelling instruments

To practice the simple leveling

Leveling

Leveling is a method of surveying used for determination of the difference of elevations or levels of various points on the surface of the earth. The elevation of a point is its vertical distance above or below a reference level, called datum. Most commonly used datum is the mean sea level (M.S.L). Leveling is required to determine the undulations of the earth’s surface for topographic mapping. Leveling is needed for the design of highways, railways, canals, sewers, etc. Leveling is essential for the layout of construction projects, locating the excavation levels and for the control of various elevations in buildings, bridges, dams etc. The results of the leveling can be used to determine the catchment area, volume of the reservoir and the area submerged by a reservoir.

Aim

To design bench terrace

1. Components of bench terrace

The bench terrace essentially consists of the four components namely: riser, outlet channel, platform and shoulder bund

Q. 1 Which option about the statements made below is correct?
(1) The cooling system maintains engine temperature at 71 to 82ºC for petrol engines.
(2) The thermostat valve begins to open at about 60oC and opens widely at about 71ºC.
(A) Statement (1) is true, but statement (2) is false.
(B) Statement (2) is true, but statement (1) is false.
(C) Both statements (1) and (2) are true.
(D) Both Statements (1) and (2) are false.

The main objective of nanomedicine broadly defined as the comprehensive monitoring, repairing and improvement of all human biological systems, working from the molecular level using engineered devices and nanostructures to achieve medical benefit. Nanomedicine is the nanomachine of diagnosing, treating, and preventing disease and traumatic injury, relieving pain, and of preserving and improving human health, using molecular tools and molecular knowledge of the human body. Nanotechnology applications in medical science can be essential in achieving this goal. These applications involves extensive surveillance, control, creation, repair, and defence of all biological human systems, employing designed nanodevices and nanostructures which works in molecular level.

The recent concept of intellectual property emerged in England in the 17^th & 18^th centuries. The term Intellectual Property came in use in the 19^th century and in the late 20^th century. As of now the Intellectual Property has occupied common position in the global legal systems. There are different forms of Intellectual property rights which include patents, copyright, industrial design, trademarks, plant variety rights, trade dress, geographical indications and in some jurisdictions trade secrets too

Major International Treaties Related to IPR & TRIPS

There are different forms of intellectual property like Patents, Copyright, Trademarks, Industrial design, Plant Varieties etc. Various meeting and conventions were also convened for the protection in these intellectual properties at international level from time to time and to bring uniformity and coordination among member countries. These were reflected in different treaties, which are mentioned below. Among all these treaties/conventions the agreement on Trade related aspects of intellectual property rights (TRIPS), which runs under aegis of World Trade Organization is most influential, comprehensive and inclusive of all.

The International Union for the Protection of New Varieties of Plants or UPOV is an intergovernmental organization with headquarters in Geneva, Switzerland. UPOV was established by the International Convention. The objective of the Convention is the protection of new varieties of plants by an intellectual property right. The Convention was adopted in Paris in 1961 and revised in 1972, 1978 and 1991. UPOV aims to encourage the development of new varieties of plants for the benefit of society by codifying intellectual property for plant breeders.

The International Union for the Protection of New Varieties of Plants (UPOV) based in Geneva, Switzerland and established in 1961 is an intergovernmental organization to provide and promote an effective system of plant variety protection, with the aim of encouraging the development of new varieties of plants, for the benefit of society. For plant breeders' rights to be granted, the new variety must meet four criteria under the rules established by UPOV as discussed earlier also.

Components of biodiversity are all the various forms of life on Earth including ecosystems, animals, plants, fungi, microorganisms, and genetic diversity. Ecosystems, species and genetic resources should be used for the benefit of humans, but in a way that does not lead to the decline of biodiversity. Substantial investments are required to conserve biodiversity, but it will bring significant environmental, economic and social benefits in return. To address these challenges various initiatives were taken in the past such as Ramsar Convention on Wetlands in 1971, Convention on International Trade in Endangered Species of Wild Fauna and Flora (CITES) in 1973, 1979 Bonn Convention on Migratory Species (CMS) in 1979.

The ITPGRFA is a comprehensive international agreement which is poised at guaranteeing food security through the conservation, exchange and sustainable use of the world's plant genetic resources for food and agriculture, instead of fair and equitable benefit sharing arising from its use. It also advocates Farmers' Rights.

13.1. Genesis of the Treaty

The conservation and sustainable use of plant genetic resources for food and agriculture are keys to feed global growing population in the coming future. The Commission on Genetic Resources for Food and Agriculture was established in 1983, and the voluntary International Undertaking on Plant Genetic Resources was adopted here in. Another major step was taken in 1996 with the adoption of the Global Plan of Action at the Leipzig International Technical Conference on Plant Genetic Resources. 

Introduction

While experimenting with chemicals, sometimes we need to dry the chemical/ solution (solid, liquid or gas) using a process like evaporation or distillation, mainly to remove water or different solvents. Drying is the process of evaporation or distillation to remove water/solvent from a solution, solid or even from gas. Generally, a drying agent (usually an anhydrous inorganic salt) is used for this process, which reacts with the water (present in the chemical/ solvent to be dried) to form a hydrate. For example, anhydrous MgSO4 is one of the drying agents. The drying agents are recognized by their capacity (the rate at which they absorb water) and their intensity (the amount of water left behind in the solvent at equilibrium). No chemical reaction or change in phase occurs during the drying process.

Type of Solvents

Apart from water (a universal solvent), there are three families of organic solvents used in laboratories.

1) Oxygenated solvents: Alcohols, Ketones, Glycol ethers, Glycol esters, etc.

2) Hydrocarbon solvents: Aliphatic and Aromatic hydrocarbons.

3) Halogenated solvents: Chlorinated hydrocarbons.

Introduction

For agricultural applications as well as for research work, often we need to prepare solutions of different agrochemicals of varying strength, as per the requirements. Agrochemicals are used to help crop plants grow, produce, and protect them from biotic/abiotic stresses. Many of the agrochemicals (insecticides, herbicides, fungicides, rodenticides, molluscicides, nematicides, etc.) are used to protect the crop from insect pests and diseases. However, some of them (fertilizers and soil conditioners) are used to augment crop yield. While in the previous chapter (Chapter 8) we discussed about preparation of laboratory solutions, in this chapter we will briefly discuss about the preparation of different agrochemicals.

Agrochemical/agrichemical is a generalized term used for the chemicals applied in agriculture. In general, it also includes the feed-supplements used in f isheries and animal husbandry.

Agrochemicals

Fertilizers

Fertilizers are used to augment growth of crop plants and to mitigate nutrient deficiency in the soil. Fertilisers can be organic (containing natural substances, prepared through natural processes) and inorganic fertilisers (synthetic fertilizers, manufactured artificially using chemical processes using natural deposits, by chemical alterations).

Soil Conditioners

Soil conditioners include manure, livestock and leaf compost, peat that help making the soil in good condition. They are laid on the top soil and then mixed properly. They not only increase nutrient contents in the soil but also improve aeration and water holding capacity.

Smart farming, otherwise called smart agriculture, uses progressed agriculture advancements to improve ranch the farm management. By consolidating Industry 4.0 advancements, Precision farming achieves doable outcomes like extend production, resource insurance, and lessened petroleum derivative result. Internet of Things (IoT) accepts a fundamental part in Smart farming, by Precision agriculture to screen and deal with things, as a matter of fact. Information examination is in like manner essential for isolating huge encounters from the colossal proportion of data created by IoT devices. The reconciliation of present day modern digital technology has change into smart farming as information empowered and information driven activity. After affiliation, further examination of each IoT and data analytics frameworks in the agricultural region can be positive.
The total population is predicted to increase by 10 billion in 2050, by enhancing interest for agricultural goods, and notable food. This has brought about a developing interest supply befuddle. Issues including restricted assets, natural changes, and work deficiencies increment the jumble, endangering food security and agricultural production. To defeat these worries, farming should be feasible and utilize state of the art innovation. One important choice is “smart farming,” that attempt to increased food productivity by meeting the population demand in a sustainable manner. This is steady with the Assembled Countries’ Sustainable Development Goals (SDGs), which hold back nothing security utilizing reasonable ways.
Smart farming strategy for agriculture business had changed Ancient farming into smart agriculture. Ancient times, human cultivated the soil to provide food for livelihood. Such activity is known as agriculture, and it follow a long path between agriculture 1.0 to agriculture 4.0. Producers employed agricultural implements including pitchforks and sickles for cultivation throughout the 17th century, a period called as Agriculture 1.0. Farming practices, a huge number of workers are needed to conduct agricultural tasks. Moreover, agricultural

GHG emissions as an Agriculture
Agriculture is significant source of GHG emission. Farming records for roughly 10-12 % of absolute anthropogenic GHG emissions, contributing 40 % of all out methane (CH4) and 60 % of nitrous oxide (N2O); agriculture is greatest wellspring of anthropogenic non-CO2 discharges. CH4 begins predominantly from metabolic action of methane-creating microscopic organisms in rice paddy soils and the gastrointestinal maturation of ruminants. N2O discharges get predominantly from farmland soil nitrification and de-nitrification under nitrogen manure application. Rural waste treatment, for example, fertilizing the soil and biogas creation, likewise straightforwardly brings about CH4 and N2O discharges. The change of land use from backwoods to cropland increments soil CO2 discharges. Notwithstanding immediate GHG discharges, farming exercises like apparatus tasks, and compost and feed inputs additionally by implication increment the carbon impression of farming by means of different pathways like petroleum product utilization.
Agriculture a Key Carbon Sinks
Farming moreover addresses a key carbon sink, in spite of the way that it is a huge wellspring of GHG. Horticultural perennials, for instance, field, backwoods, natural item estates and tea houses can get CO2 from the Environment through photosynthesis. It is evaluated that around 13 % of the CO2 emanated by oil based commodity use is consumed by natural vegetation reliably. Vegetation stores are changed into soil natural carbon (SOC) by the activities of microorganisms. In particular, microbial Nero mass can associate with soil minerals to shape a muddled that is a protected carbon pool and the soil carbon can subsequently be taken care of for a surprisingly long time; this carbon tirelessness instrument is known as a soil microbial-mineral carbon siphon. The soil carbon pool (2400 Gt) truly relies upon twice that set aside in the terrestrial vegetation and on different occasions that set aside in the air. The “4 for every 1000 soil carbon overhaul plan,” first proposed by the French service of agribusiness at the Collected Nations Environmental Change Gettogether held in 2015, relies upon the epic carbon-sink breaking point of soils.

1. Introduction
Animal experimentation remains a cornerstone of scientific research in many fields, from medical advances to pharmaceutical testing. However, the ethical treatment of laboratory animals has become a point of significant concern worldwide. India, through the Committee for the Control and Supervision of Experiments on Animals (CCSEA), ensures that ethical standards are maintained in research institutions. Established under the Ministry of Environment, Forests, and Climate Change (MoEF&CC), CCSEA is tasked with overseeing the use of animals in experiments, ensuring that procedures adhere to ethical guidelines and international norms. CCSEA’s guidelines are in line with international standards set forth by organizations such as the International Council for Laboratory Animal Science (ICLAS) and the European Union (EU), but they are tailored to address local needs and conditions. The guidelines, which focus on the welfare of laboratory animals, emphasize the ethical review process, animal care, and the importance of minimizing animal suffering. They also stress the need for researchers to implement the 3Rs—Replacement, Reduction, and Refinement—to minimize the use of animals and ensure humane practices in research. This chapter explores the CCSEA guidelines in detail and compares them with animal welfare regulations from around the world, including the United States, European Union, Japan, and Australia. By understanding the similarities and differences between these regulations, researchers and policymakers can ensure the ethical treatment of laboratory animals on a global scale.
2. Objectives of CCSEA Guidelines
The main objective of the CCSEA guidelines is to ensure that laboratory animals are treated ethically and humanely while also supporting the validity and scientific rigor of research. The guidelines encourage researchers to prioritize animal welfare while minimizing unnecessary suffering. Specifically, CCSEA focuses on:
1. Ethical Treatment of Animals: Ensuring that animals are housed in suitable conditions, given adequate veterinary care, and provided with a comfortable environment to reduce stress.
2. Justification of Animal Use: Ensuring that animals are used only when necessary, and that their use is scientifically justified.
3. Pain and Stress Minimization: Ensuring that experimental procedures cause the least pain, distress and suffering possible.

Introduction
The use of animals in scientific research has been a cornerstone of medical advancements for decades. However, this practice has also been the subject of intense ethical debate. This lecture explores the necessity of animal experimentation, the ethical considerations involved, and the regulatory frameworks in place to ensure the humane treatment of laboratory animals.
The Need for Laboratory Animals
Animal experimentation has played a crucial role in numerous medical breakthroughs. The importance of laboratory animals in research cannot be overemphasized. Among the various purposes for which humans use animals, experimentation involves relatively few animals and serves a noble purpose in advancing scientific knowledge and human health.
Laboratory animals are invaluable in the drug development process for several reasons:
• Similarity to human organ systems, metabolism, and enzyme functions.
• Suitability as alternatives to human subjects.
• Small size and ability to be reared in controlled environments.
• High reproductive rates.
• Potential for genetic purity, leading to reproducible and reliable results.
The Importance of Animal Welfare
While the benefits of animal experimentation are clear, it’s equally important to consider the ethical implications of using animals for research. The concept of animal welfare is embedded in the Indian Constitution, which states that it is the duty of every citizen “to protect and improve the natural environment including forests, rivers, lakes and wildlife, and to have right compassion for the living creatures” (Article 51 A (g)). This ethical consideration for animals has been emphasized by philosophers, spiritual leaders, and scientists throughout history:

Introduction
Good Laboratory Practice (GLP) has been a cornerstone of laboratory operations, ensuring quality, reliability, and reproducibility in research and development across various fields, including pharmaceuticals, biotechnology, and environmental science. As we move further into the 21st century, the landscape of GLP is evolving rapidly, influenced by technological advancements, regulatory changes, and the increasing complexity of scientific research. This article explores future trends and innovations in GLP, delving into key areas such as automation, data management, regulatory shifts, and sustainable practices.
1. The Role of Automation in GLP
1.1 Increased Efficiency and Accuracy
One of the most significant trends in GLP is the integration of automation. Laboratory automation includes the prompt use of technology to perform tasks in a much efficient way with minimal human interventions, thus significantly increasing efficiency and accuracy of laboratory practices. Automated systems can handle repetitive tasks such as liquid handling, sample preparation, and data analysis, reducing the potential for human error.
Benefits of Automation
• Reduction of Human Error: Automation minimizes the chances of mistakes that can occur when humans perform these repetitive tasks, thereby improving the reliability of the results.
• Speed up the Research Process: For example, robotic systems can be used in drug discovery. These systems can conduct high-throughput screening, which means they can quickly test thousands of different compounds for potential effectiveness as drugs.

16.1 Introduction

The stabilization of ultra fine as nano-particles in suspension is very important for both controlling the particle size and for developing process based application of these suspensions to achieve a desired result. Generally, two approaches, namely, Top Down and Bottom-Up approaches are followed for the preparation of ultra fine or nano particles. In the Top-Down method, production starts from the micro-scale and the particles size is reduced to nano-size through repeated impact and collision in high-energy ball mills. However, controlling of size, morphology, surface properties and electrostatic charge is often difficult. In the Bottom-up approach, production of nano-particles starts with the individual atoms and building up to a nano-structure by chemical processes.

Aim

Studies on plane table survey instruments

To determine the area of given open field by radiation method of plane table survey.

Plane table survey

Plane table surveying is a simple method of surveying for determination of area of field. The plane table survey is quite suitable for plotting small-scale and medium scale mappings directly in the field where great accuracy is not required. It is also used for plotting the topographical maps in the field. The plane table survey is generally more rapid and less costly than other types of survey.

In this survey, a plane table is used for taking the measurements and for plotting the plan in the field. Plane table surveying is a method in which the field observations and plotting of the plan proceed simultaneously. The plotted map can be compared with the actual features in the field. Errors in measurements and plotting can be easily detected in the field by taking suitable check lines.

Deep learning enables automated analysis of agricultural images for crop classification, disease detection, weed identification, yield prediction and soil monitoring. This chapter examines Convolutional Neural Networks, Recurrent Neural Networks and Vision Transformers applied to imagery collected by satellites, drones and ground-based sensors. These models automatically identify patterns and features that conventional methods may overlook. Integration with precision agriculture can improve decision-making, increase crop productivity and reduce resource waste. Challenges include shortages of annotated datasets, limited interpretability and high computational requirements. Transfer learning, data augmentation, edge computing and real-time processing are discussed as approaches for enabling practical deployment in remote and resource-constrained agricultural environments.

8.1 Introduction

Nanotechnology is the manoeuvring or self-assembly of individual atoms, molecules, or molecular clusters into structures to craft materials with new properties. The definition of nanotechnology is based on the prefix “nano” which is from the Greek word meaning “dwarf”. In more technical terms, the word “nano” means 10^-9, or one billionth of something. The word nanotechnology is generally used when referring to materials with the size of 1 to 100 nanometres, which is true for metallic nano-material. In case of polymeric nano-material, size may reach 600 nm, as polymeric materials are larger in size compression to metallic material. Nano-materials have different properties from bulk materials as a result of their size. These differences include physical strength, chemical reactivity, electrical conductance, magnetism, and optical effects (Schmid, 2006).

17.1 Introduction

In industrialized nations the air is filled with numerous pollutants caused by human activity or industrial processes, such as carbon monoxide (CO), chlorofluorocarbons (CFC), heavy metals (arsenic, chromium, lead, cadmium, mercury, zinc), hydrocarbons, nitrogen oxides, organic chemicals (volatile organic compounds, known as VOCs, and dioxins), sulphur and other particulates. The presence of nitrogen and sulphur oxide in the air generates acid rain that infiltrates and contaminates the soil. The high levels of nitrogen and sulphur oxide in the atmosphere are mainly due to human activities, particularly burning of oil, coal and gas. Only a small portion comes from natural processes such as volcanic action and decay of soil bacteria. Water pollution is caused by numerous factors, including sewage, oil spills, leaking of fertilisers, herbicides and pesticides from land, by-products from manufacturing and extracted or burned fossil fuels.

ABSTRACT

Concomitant with paradigm shift from agrarian and brick and mortar economy to knowledge and service based economy, India needs to adhere to the international conventions for the benefit of enriching its knowledgebase with which economic development and social welfare could be achieved. Although geoscientific research has been at the forefront and contributed immensely to our country’s economic development, number of applications for patents, copyrights, etc., on geoscientific concepts, databases, innovations, designs or processes has been negligible when compared with other branches of science. This paper intends drawing the attention of geoscientists on this lacuna and provides information on fundamental aspects of IPR that may be of help to geoscientists whose innovations are waiting to be filed for patents or copyright.

Abstract

Intellectual property right (IPR) is the most serious, new branch of law and a legal right conferred by federal government in accordance with International conventions and treaties. IPR protects some of the finer manifestations of human achievement. IPR safeguards the application of ideas and information that are of commercial value. The exploitable ideas become more sophisticated and hope for a successful economic future depends increasingly upon the superior corpus of new knowledge and fashionable conceits.  Copyright law is one of the effective tools of IPR. Copyright law provides an incentive to creative activity of author and permits the society to benefit from those inventions. However, the technological advancement has made violation of copyright very easy and regulation very difficult. This paper aims at familiarizing  copyright laws and the powers enshrined in copyright laws.

Introduction

Nature has been performing wonderful feats for millions of years. All organisms from microbes to humans are powered by highly evolved molecular and cellular machines that operate at nano scale. The capability to manipulate, control, assemble, functionalise, produce and manufacture things at atomic precision provides an opportunity to understand this new and exciting field of science. Nanotechnology is application of science to control the properties and structure of matter at nanometric scale.

Introduction

Biological systems are complex and are full of mysteries. Understanding function in relation to structure is crucial in many biological systems. A microscope is used to magnify, resolve and visualize a substance that is impossible to see by naked eyes and plays a vital role in various biological studies. We can visualize macroscopic organisms like animals, plants, and insects by the unaided eye but not bacteria, viruses or individual proteins. Biological structures have sizes variable over such a wide range that is not possible for a single microscopic technique to analyze all of them. Therefore, different types of microscopes with varying magnification and resolving abilities were developed to unveil the structural complexities of biomolecules (Fig. 1). Over the last 100 years, several types of microscopes have been designed and used in various fields. The microscopes work on different principles, and have a broad range of applications.

Introduction

Plant diseases are one of the causes of concern in agriculture and horticulture industry. Estimated global crop loss due to plant diseases exceeds hundred billion US$ worldwide (Orke et al. 1994; Narayanasamy, 2010). Plant diseases are caused by microorganism such as fungi, bacteria, viral, viroids and phytoplasma. Most of the plant pathogens are transmitted through seed or planting material, which can spread secondarily through vectors and lead to severe loss to the crop. Among plant diseases, viral diseases cause serious crop losses and affect the quality of products, while the use of virus- free seeds and planting stocks results in a substantial increase in agricultural crop production (Waterworth & Hadidi, 1998; Strange& Scott, 2005).

Introduction
 
Nanotoxicity is a serious concern to be addressed sooner than later as nano-based processes and products in various fields are being extensively exploited. Nanotoxicology is the science of engineered nanodevices and nanostructures that deals with their effects in living organisms (Oberdorster et al., 2005). The unique property of nanoparticles is in its very large surface area to mass ratio, which is considered to be a boon to create novel products. But this distinctive property also challenges the way we identify, understand and address potential risks caused by nanoparticles (Rajkishore et al., 2011). It is sufficient to alert us to the fact that some engineered nanoparticles do indeed behave differently to their more conventional counterparts and may present new and unusual risks. Kahru and Dubourguier (2010) assessed the existing literature on nanotoxicity to main food chain levels (bacteria, algae, crustaceans, ciliates, fish, yeasts and nematodes) and classified the NPs of Ag and ZnO as “extremely toxic”, C60 fullerenes and CuO NP as “very toxic”, SWCNTs and MWCNTs as “toxic” and TiO₂ NP as “harmful”. 

Introduction

The characterization of the potential health impact of engineered materials produced through nanotechnology is an emerging issue of considerable discussion and debate. The current focus on nanotoxicity fails to assess the risk in different local environments and populations. People in developing countries may be more prone to adverse effects of nanoparticles because of underlying health conditions and malnutrition. Moreover, genetic susceptibility to toxic effects varies in diverse ethnic groups and geographical areas. The scientific community needs to identify these information gaps before developing regulations and standard methodologies for nanotoxicity assessment.

Introduction

Engineered nanoparticles are a group of products that are defined by their size, ranging from 1 to 100 nm. Due to the smaller size, the physio-chemical properties of nano particles become very different from those of the same material in a larger form. Total production of nano-materials is expected to increase considerably in the near future. Nanotoxicology is yet another emerging field of science dealing with the effects of nano-devices and engineered nano-particles on living organisms. It has been observed that the materials in nano-dimensions react totally different in comparison to their existence in micro or macro sizes.

Improving the skill set of individuals is an important agenda of any development organization. The individuals may be anyone in the system who is directly or indirectly connected to the system.  Agriculture System is a complex and multi-stakeholder system with farmers as the axis of the wheel with other stakeholders’ forms part of spokes of the wheel. The scope for capacity building or training of every stakeholder has been peaking tremendously given the ever changing nature of the profession. The public and private training Institutions are vying with each other for conducting trainings in order to sustain the existence of the Institutions. Though a few institutions are really trying hard to take the technologies in real terms to the farming community, the following observations are very difficult to be masked.

Abstract

Human Resource Management (HRM) is an essential function of every organization. Information Technology (IT) application has made such ‘human resource management’ function easy, to a great extent. Now a day, IT has been used widely across the organizations to perform different functions like, Recruitment, training, maintenance and development etc. Human Resource Information System (HRIS) is one of the latest contributions of IT to the area of human resource management, which is going to revolutionise management in 21st Century. Technology has brought changes in the existing working styles of organisations. By the introduction of HRIS, it enhances the efficiency of the organisation by changing the traditional way of working. In Human Resource Information Systems, many organizations use employee data in traditional ways. These can create conflict with the rights and interests of employees, with external stakeholders, and with society at large. The present paper discusses such issues. Other soft issues like, challenges and possible solutions are also discussed.

Nanomaterials are a field which takes a materials science-based approach to nanotechnology. It studies materials with morphological features on the nanoscale, and especially those which have special properties stemming from their nanoscale dimensions. Nanoscale is usually defined as smaller than a one tenth of a micrometer in at least one dimension, though this term is sometimes also used for materials smaller than one micrometer.

An aspect of nanotechnology is the vastly increased ratio of surface area to volume present in many nanoscale materials which makes possible new quantum mechanical effects, for example the “quantum size effect” where the electronic properties of solids are altered with great reductions in particle size. This effect does not come into play by going from macro to micro dimensions. However, it becomes pronounced when the nanometer size range is reached. A certain number of physical properties also alter with the change from macroscopic systems. Novel mechanical properties of nanomaterials are a subject of nanomechanics research. Catalytic activities also reveal new behaviour in the interaction with biomaterials.

Polymeric nanoparticles are nanoparticles which are prepared from polymers. The drug is dissolved, entrapped, encapsulated or attached to nanoparticles and depending upon the method of preparation, nanoparticles, nanospheres or nanocapsules can be obtained. Nanocapsules are vesicular systems in which the drug is confined to a cavity surrounded by a polymer membrane, while nanospheres are matrix systems in which the drug is physically and uniformly dispersed.

In recent years, biodegradable polymeric nanoparticles have attracted considerable attention as potential drug delivery devices in view of their applications in drug targeting to particular organs/tissues, as carriers of DNA in gene therapy, and in their ability to deliver proteins, peptides and genes through oral route of administration.

In spite of development of various synthetic and semi synthetic polymers, natural polymers still enjoy their popularity in drug delivery, some of them are: gums (Eg. Acacia, Guar, etc.,) chitosan, gelatin, sodium alginate, and albumin. A range of materials have been employed to delivery of bioactive agents. A polymer used in controlled drug delivery formulation, must be chemically inert, non-toxic and free of leachable impurities. It must also have an appropriate physical structure, with minimal undesired aging, and be readily processable. Some of the polymeric materials are: cellulosics., poly(2-hydroxyethyl methacrylate), poly(N-vinyl pyrrolidone), poly(methyl methacrylate), poly(vinyl alcohol), poly(acrylic acid), polyacrylamide, poly(ethylene-co-vinyl acetate), poly(ethylene glycol), poly(methacrylic acid).

Nanomedicine is the medical application of nanotechnology. The approaches to nanomedicine range from the medical use of nanomaterials, to nanoelectronic biosensors, and even possible future applications of molecular nanotechnology. Current problems for nanomedicine involve understanding the issues related to toxicity and environmental impact of nanoscale materials.

Nanomedicine research is receiving funding from the US National Institute of Health. Of note is the funding in 2005 of a five-year plan to set up four nanomedicine centers. In April 2006, the journal Nature Materials estimated that130 nanotech-based drugsanddeliverysystems were being developed worldwide.

The impact of nanotechnology in the food industry has become more apparent over the last few years with the organization of various conferences dedicated to the topic, initiation of consortia for better and safefood, along with increased coveragein themedia. Several companies which were hesitant about revealing their research programmes in nanofood, have now gone public announcing plans to improve existing products and develop new ones to maintain market dominance. The typesof application include:smartpackaging, on demand preservatives, and interactive foods. Building on the concept of “on-demand” food, the idea of interactive food is to allow consumers to modify food depending on their own nutritional needs or tastes. The concept is that thousands of nanocapsules containing flavour or colour enhancers, or added nutritional elements (such as vitamins), would remain dormant in the food and only be released when triggered by the consumer.24 Most of the food giants including Nestle, Kraft, Heinz, and Unilever supportspecific research programmes tocapturea share of the nanofood market in the next decade.

The definition of nanofood is that nanotechnology techniques or tools are used during cultivation, production, processing, or packaging of the food. It does not mean atomically modified foodor foodproduced by nanomachines. Although there are ambitious thoughts of creating molecularfood using nanomachines, this is unrealistic in the foreseeable future. Instead nanotechnologists are moreoptimisticabout thepotential to changethe existing systemof food processingand to ensure the safety of food products, creating a healthy food culture. They are also hopeful of enhancing the nutritional quality of food through selected additives and improvements to the way the body digests and absorbs food. Although some of these goals are further away, the food packaging industry already incorporates nanotechnology in products.

1.1 Introduction

Since 1990s optoelectronics and fiber optics technology underwent significant advances due to innovations in the telecommunications, semiconductor and consumer electronics sectors. The developments of compact disk (CD) players, laser printers and the high performance and reliable optical fiber communication are the result of these advances. The optical fiber sensor technology is a direct outgrowth of the revolutions taken place in optoelectronics and fiber optic communication industries. Many of the components associated with these industries are used for optical fiber sensor applications. In the beginning the main hurdle in the development of sensors was the cost of components such as optical sources and detectors. With the time, components prices are falling and the improvements in fiber, laser and photodetector technology have taken place. It is expected that as the time progresses the optical fiber sensors will replace the conventional devices for the measurements of various physical, chemical and biological parameters such as rotation, acceleration, electric and magnetic fields, temperature, pressure, acoustics, vibration, position, strain, humidity, viscosity, pH, glucose, heavy metals, gases, viral infection, pollutants etc.

4.1 Introduction

Apart from an optical source, the optical detector is another important component of the optical fiber sensor. The optical detector converts the optical signal to an electrical one. The signal is then processed either to record or display. There are various kinds of optical detectors but the commonly used in sensors are semiconductor diodes. In some of the cases photomultiplier tube has been used. In this chapter we shall describe the basic principles of optical detectors and their operational characteristics.

4.1 Introduction

The objective of this chapter is to design a mobile app for agricultural field automation with Blynk app. Mobile app is designed to control the water management in field as per requirement. The complete system comprises of two sections sensor node and mobile app. Sensor node comprises of Node MCU, Power supply, LCD, Relay board, soil sensor and Ultrasonic sensor. The system is designed to establish control and communication with specific agricultural field to take sensory data from soil and ultrasonic level sensor and control the PUMP IN motor and PUMP OUT motor with the help of mobile app.Fig.4.1 shows a block diagram for a system to control specific agricultural field with mobile app and IoT modem.