eChapters

10.1. Introduction

During last few decades dairy animal production has been intensified several folds, along with this reproductive problems have also increased. For efficient dairy animal production, the cow should show regular reproductive activities like cyclic breeding activity, pregnancy at appropriate time, give birth of a live healthy calf and again pregnant after sometimes. If any of these activities are inadequate, then it substantially affects the profitability of the farm. There is an ample scope of improvement of these reproductive setbacks through traditional breeding, feeding and management. However, reproductive problems can be minimized by the use of recently developed reproductive techniques. It not only minimizes reproductive problems, but also improves the reproductive efficiency of the dairy herd and better exploitation of the genetic potential of high merit animals.

Research methodology gives detailed justification about the research methods and procedures carried out in the present study. The present study focuses on the women’s involvement in the dairy farming and their empowerment. Keeping in view the specific objectives of the study and various aspects relating to these objectives the methodological framework has been formulated. The sub topic under the research methodology is as follow:

3.1 Locale of the study

The present study entitled “Retrospective Multidimensional Study on Magnitude of Participation of Women in Dairy Farming in East district of Sikkim” was carried out in the villages of East district of Sikkim. Sikkim is the second smallest states in India, with an area of 7,096 sq. km in size. The meaning of Sikkim is “The valley of rice”. It lies between 27 º33' 00" N and 88 º30' 00" E. The average annual temperature of the state is 18 ºC (64 ºF) and annual rainfall is 2739 mm. The state is situated in the Eastern Himalayas and it shares its border with countries like Tibet, Nepal and Bhutan. Mt Kanchendzonga (8585m) which is the third highest peak in the world is situated at Sikkim. According to 2011 census, population of state was 610,577 with male population of 323,070 and female population of 287,507. The literacy rate in the state is 81.40 percent. The density of the state is 86 people per km2 (Census,2011). The cattle population in the state was 264,860 in number (BAHS,2019). The state has four district- East, West, North, and South (Registrar General of India, 1989).

The major focus of the study was to critically analyse the overall performance of Women Dairy Cooperative Societies (WDCS) in two districts of Odisha. The methodology used in carrying out investigation has been outlined in eight sections as mentioned below.

1. Selection of problem
2. Research design
3. Plan of work
4. Locale of the study
5. Sampling procedure

Research and development plays a central role in innovation, product improvement, cost optimization, and competitiveness in the ice cream industry. This chapter explains the distinction between research, development, and new product development and examines the responsibilities of an R&D department. It covers formulation development, pilot and plant trials, ingredient evaluation, shelf-life studies, regulatory considerations, supplier collaboration, product costing, and commercialization. The chapter also highlights the importance of cooperation between R&D, QA, production, procurement, marketing, and finance. Key performance indicators and common mistakes are discussed to strengthen the effectiveness of R&D programmes. The chapter ultimately connects scientific innovation with manufacturing feasibility, consumer expectations, regulatory compliance, and commercial success

This chapter presents the analysis, interpretation and discussion of the collected data from the study area in an effort to attain the objective of the study. The data collected were analyzed with appropriate statistical test and presented in a systematic format.

The results of the study are presented under the following subheadings:

4.1 Distribution of respondents according to different socio-economic variables

Basic information of the respondents under the study has been given according to the socio-economic characteristic of the respondents. Variables like age, education, marital status, family size, family type, milk production per day, social status, farming experience, herd size, land holding and annual income are presented in the following table 4.1

Research being a continuous process for a scientific study, previous study provides basis for the research. The review of literature is necessary for developing conceptual frame work and suitable design for the study. It assists the researcher to keep his work going in right direction. The available literature related to the present study has been reviewed under the following heading:

2.1 Differential role accomplished by women dairy farmers from different social strata

Toppo et al. (2004) examined the participation of women farmers in dairy occupation in Anand district of Gujarat and their result revealed that 18.34 percent of the farm women were mostly engaged in activities related to artificial insemination, majority of the respondent (68.34%) participated in cleaning of the shed, while 25.00 percent of the farm women practised manure preparation and 95.00 percent of the respondent were not involved in preparation of gobar gas mixture.

Badole (2006) reported that majority of the responded had low socio-economic status.

Introduction

Food processing comprise of techniques employed to transform raw ingredients into final food product or to preserve the food product. Food processing industry as well as at domestic scale the food processing methods aim at providing processed food products for daily consumption by humans and animals. Food processing aims at increasing the shelf life, preserve, make nutritious or ready to eat foods, and getting the best quality final products. There are various techniques and methods which come under food processing such as drying, dehydration, fermentation, pickling, freezing, mixing, pumping, pasteurization, cooking and homogenization etc.

Rheological properties of foods are greatly influenced by various unit operations and processing methods or conditions such as heating and mechanical treatments. Processing of different food products such as dairy, fruit and vegetable products like jams and purees, chocolates, dough development etc. and basic make up of foods such as fats, proteins and others such as emulsifiers, hydrocolloids etc. affects the rheological properties of food product and which ultimately affects the quality of end product. Apart from processing conditions the compositional variations have a great impact on the textural or rheological properties of foods. The changes in rheological characteristics of a food product reflects the alterations in the molecular structure of the food material, this can aid in revealing the changes in product structure during different processing methods or conditions. In designing of various processes such as cooling, freezing and equipment design information about thermal properties is crucial. Moreover, in order to design storage structures for foods and refrigeration equipment the knowledge of thermal properties is important (Becker et al. 2003).

For rheological measurements various tests and techniques are available, such as steady and dynamic shear measurements. From the steady shear properties flow properties of the sample can be revealed whether the flow is Newtonian or Non Newtonian. In case of dynamic shear rheological properties information on viscoelastic characteristics can be withdrawn in terms of storage and loss modulus and depending on the predominance of each modulus the nature of sample can be predicted i.e. whether viscoelastic solid or viscoelastic fluid (Bhardwaj et al. 2019). Apart from these measurements, other rheological measurements are available for specific food materials, such as farinograph, alveo-consistograph, mixograph etc. are meant for study of rheological properties of dough. So, accordingly, depending upon the food material choice of rheological measurement can be made. To study the thermal transitions DSC (Differential scanning calorimeter) and DTA (Differential thermal analysis) are commonly employed. Dynamic measurements as a function of temperature or time are made in these techniques to detect the endothermal and exothermal changes. These techniques can be used to determine the phase transitions in various foods, for instance, crystallization and melting of water, lipids and other food components; denaturation of protein; gelatinization of starch and others (Roos 2015).

Introduction

Biological, physical, chemical and other hazards associated with food have been detailed in Chapter 4. This chapter would address the risks associated with these hazards as well the scientific approach is assessing them. Risk analysis is an inevitable platform for food safety assurance which measures the impact of hazards on the health of consumers. To improve public health and maintain consumer trust in the food supply and to provide a sound regulatory foundation for national and international trade in food, an efficient food safety management system is essential. Therefore, World Trade Organization (WTO) developed food regulations governing international trade in foods based on science and risk assessment. A sound knowledge of food hazards and risks they pose to consumers, along with the capacity to take appropriate interventions, deserve top priority of a responsible authority and industry.

Risk

The word ‘risk’ is used to describe a situation that involves a possibility of something undesired to happen (Rowe, 1977). In food processing, hazards are considered as risks. Hazards are often thought of as synonyms of risks, however, hazards are quite different from risks.

A food borne hazard is defined by Codex as “a biological, chemical or physical agent in or condition of food, with the potential to cause an adverse health effect”. A risk is the chance, low or high, that any hazard will actually cause harm. Some of the emerging food hazards that must be assessed and managed are listed in table 1. Assessment and management of risks posed by these hazards is the responsibility to be urgently addressed by the scientific community.

Biofilms are resistant to antibiotics even at high concentrations (Costerton et al., 1999).This could happen when the diffusion of the antibiotic within the biofilm matrix is inefficient and results in slow growth rate of biofilm cells (Davey et al., 2000), there could be the presence of persistent cells and antibiotic-resistant small-colonies (Hogan and Kolter, 2002; Kolenbrander, 2000).Studies have proved that antibiotics can inhibit biofilm formation. An antibiotic azithromycin, is known to inhibit Pseudomonas aeruginosa biofilm. Biofilm colonies become resistant at higher concentrations of the antibiotics whereas at low concentrations these can be induced (Mah and OToole, 2001). P.aeruginosa is commonly present in the lungs of patients infested with cystic fibrosis. The clinical isolates show resistance to azithromycin (MIC>64 pg/ ml).However, low doses of azithromycin have shown improvement in lung function in patients with cystic fibrosis (Borriello et al., 2004). If antibiotics are given at low concentrations (below the MIC) than it induces biofilm formation in a variety of bacterial species. Sub-MIC concentrations of tobramycin can induce biofilm formation in P. aeruginosa. The use of antibiotics in agriculture, as growth promoters have shown to expose bacteria to low levels of the drugs and has caused havoc (Smith et al., 2002). Rachid et al. 

Abstract

Meat is considered to be a highly perishable food commodity because of its biological composition. Thus, to extend its shelf life and maintain its nutritive value, there is an urgent need to find out alternatives for synthetic anti-microbial and anti-oxidants. This will not only serve the purpose of meat product manufacturer’s but will also satisfy the consumers’ demand for minimally processed meat products devoid of synthetic preservatives. This review discusses the natural antimicrobial and anti- oxidants sources viz., various essential oils, their composition and application in different meat and meat products. Essential oils from basil, rosemary, thyme, oregano, ginger, basilica, balm, coriander, rosemary and clove have exhibited a better potential to be used as an antimicrobial agent in meat and meat products. They owe their anti-microbial properties to the phenolic compounds present in them. They dislocate cell membrane and disrupt functionality of bacterial cell membrane and eventually leading to the release of intracellular components. However, essential oils are not widely used due to the pungent and intense aroma imparted to the food, thus there is still need to work out on the novel technologies which can not only increase food shelf life but at the same time, are sensorially acceptable to the consumers.

Introduction

Fermentation has been an integral part of food processing throughout the history of mankind. In beginning, it was mainly preservation method, then it became key process in substantial sensory characteristic development and now it is utilized to improve overall properties of outcome from major industries like bakery, dairy, beverages, etc. The human understanding of controlled fermentation process changes its fundamental objective by exploring its success in development of rheological and texture characteristics.

The biochemical transformation of raw food due to fermentation affects the organoleptic as well as rheological properties of a product. The changes in rheological as well as sensory properties is related with the modification of major component by the action of microorganism. For example, transformation of polysaccharides in bread dough by action of yeast produce ethanol, CO₂ and other simple compound which modify sensory as well as rheology of dough. The major micro-structural, bio-compositional and bio-chemical changes are due to microbial action are frequently described to understand the effect of fermentation on rheological as well as sensory properties of food products. The rate and quality of these associated major changes mainly depends upon concentration of saccharides for growth of microorganism as well as nature and existing microflorae. Hence, a proper monitoring of changes in rheological and sensory properties is necessary to optimize the controlled fermentation as well as design of process parameters from engineering and consumer point of view.

The biochemical changes directly responsible for changes in basic rheological and sensory characteristic including flow behavior, consistency, viscoelastic properties, hardness, adhesiveness, color, aroma, flavor and mouthfeel. The food industry is so diverse and exploring new and possibilities to catch diverse consumer worldwide, a proper understanding of effect of fermentation on mentioned properties will be key to hold competitive market. Hence, the present chapter will cover the basics of rheology and its role in food industry, effect of fermentation on rheological and sensory attributes of major class of food.

Probiotics are measured in colony forming units (cfu). CFUs are generally measured in the millions or billions per serving. Probiotics are most commonly beneficial bacteria, but can also be friendly fungal or other organisms, that are typically freeze dried to stabilize them in an inert state during storage and production. Then their continued stability and viability, as measured by CFU counts when cultured, is dependent on limiting their exposure to stimulating environmental conditions such as temperature and moisture. Besides refrigeration, this protection can be done by packaging in glass or by adding freshness packets that helps to absorb and reduce moisture in the package.

Introduction

Since the last century, nutritional science has made a remarkable contribution to the biological sciences through identification of diverse nutrients and their sources, functions, requirement, deficiency symptoms and their remedial measures etc. The advent of high-throughput sequencing technologies together with bioinformatic tools identified the presence of 100 trillion of microorganism belonging to all forms of life in the gastrointestinal tract. In fact, the whole gut microbial consortia are considered as a virtual organ in human and animals and is responsible for the development and functioning of series of essential physiological activities including digestion, absorption, metabolism, immunity, homeostasis, brain and gut development, resistance against disease etc. According to the modern scientific dogma, the human being is in fact a “Superorganism”, carrying consortium of numerous symbiotic Eukarya, Bacteria, Archaea and Viruses. The gut microflora has been co-evolved with human and presumed to maintain an intricate balance among different microbial communities. Upon introspection about the functionality of the gut microflora, it is amply clear that a few of these microorganisms have the ability to make healthy state; while other members are responsible for health-related problems including food poisoning, diarrhoea, abdominal pain, indigestion, inflammatory bowel disease, predisposition to colon cancer, compromising immunity, allergy etc.

Introduction

Food is any substance or a product obtained from nature, which contains nutritive and non-nutritive components that help to maintain or improve the health of an individual if consumed in optimal amount (Sukhneet and Malhotra, 2014). Globalization of food production and procurement makes food chains longer and more complex and increases the risk of food safety incidents. Infections and diseases arising from contaminated/adulterated food remain threats to global public health (Havelaar et al., 2015; Luo et al., 2019). The WHO reports shows that every year foodborne diseases cause the death of 33 million people including many children (WHO, 2019). Food safety is linked to the presence of foodborne hazards in food at the point of consumption. Since food safety hazards can occur at any stage in the food chain it is essential that adequate control be in place. Therefore, a combined effort of all parties in the food chain is required to deliver safe food products to the final consumer. Effective and harmonized food safety systems shall manage and ensure the safety and suitability of food in each link of the supply chain.

Although the food industry has the prime responsibility of ensuring safe foods in most societies, the maintenance of a safe food supply is regarded as a responsibility of the government of that country. This responsibility has, over many years, led governments to adopt legislation, standards and regulations for food processing and to impose penalties when a business fails to meet the expectation. As with any legislation, an effective system for detecting failures to comply with the legal requirements increases compliance and hence, in this case, promotes food safety. Governments have an obligation to protect consumer health and this includes protection against food borne diseases. Food standards are therefore necessary to aid governments in protecting public health. However, the standards can only be effective when they are enforced through an efficient food control system. This therefore requires comprehensive legislation inspection, food monitoring and food borne surveillance. An efficient food control system must be supported by competent staff with good laboratory services. Political and institutional support and stability are also important elements.

Today it has been understood that yeasts have great potentials as novel probiotics (Nayak, 2011). They have been found to be safe for human consumption in traditional fermented foods (Jakobsen and Narvhus 1996). Yeasts have a great physiological importance inside the gastrointestinal (GI) tract (Czerucka et al., 2007; Gatesoupe, 2007). Jespersen (2003) has mentioned the role of consuming fermented foods and the health benefits attributed with it.Yeasts are known for prevention of table olive (Arroyo lopez et al., 2012). Bonatsau et al. (2015) have shown multi-functional property of yeast as starters.

Introduction

Food is an important contributor to human well being and is essential for sustaining life. From this point of view food is expected to contains essential nutrients, such as carbohydrates, protein fat, vitamins and other essential minerals which support life. The food production initially started for individual sustenance which slowly developed in to a community requirement necessitating the involvement of man and machinery for various activities concerned with food. The progress from famine in many parts of the world to the level of self-sufficiency and the role of science and agriculture have been absolutely significant in many parts of the world. India is no exception and the green revolution during the post 1960s and the succeeding blue and white revolution ensured the self-sufficiency in India.

Of late food acts as a vehicle for inclusion of hazard in food meant for human consumption. According to Grunert (2005), factors responsible for the alarmingly higher rate of concern by public include significantly higher number of food scares in public domain, critical understanding of production and processing of certain food products sold in the market as well as the diversified food choices of the consumers in different parts of the world. Besides, the increased awareness of the consumers on food related health issues also have its share in the increased concern on food at large.

Presently food is considered as a commodity which crosses international border concurrent with the human movement and hence quality has become a major concern. The traditional food is getting replaced with value added products, particularly ready to cook, ready to eat, partially cooked products, etc. consequent to life style changes. In order to meet the demand of the trade, the conventional processing is getting replaced by community processing or industrial processing with increased number of players in the primary production, processing, transportation and other value chain activities prompting larger product control. In the process, consumers are exposed to a variety of products produced as business ventures in modern food production systems needing efficient quality control and quality assurance to tackle the issues of quality. The increased incidence of hazards in both raw materials and final products consequent to the absence or inappropriate production schedule calls for increased food safety concerns. Besides the shelf-life of the products, addition of chemicals during the production also add to the concern.

Introduction

As the world population continues to grow, the global market for food products is expanding, together with an increased emphasis on food safety. Consumers have become more discerning in the type of foods they buy and how these foods affect their health and well being. Food safety is generally defined as the assurance that the food will not cause any harm to the consumer when it is prepared and/or eaten according to its intended use ( To achieve food safety, a management system has been developed which aims on preventing problems before they occur, rather than trying to detect failures through end product testing. It also places more responsibility for ensuring food safety on food manufacturers, who have to develop control and traceability of their products from ‘farm to plate’. The system requires the identification of specific hazards throughout the entire process of food production, concentrates on the points in the process that are critical to the safety of the product, and highlights measures for their control (Henson and Caswell, 1999).

Introduction

Tropical tuber crops viz., cassava (Manihot esculenta Crantz), sweet potato (Ipomoea batatas), taro (Colocasia esculenta), yams (Dioscorea sp.), Elephant foot yam (Amorphophallus paeoniifolius), arrowroot (Maranta arundinacea) etc., are the important sources of starch after cereals and are used as staple or supplementary food in many of the tropical and sub tropical countries. Being the crops with adaptability to wide range of soil, climate and environment of the tropics and sub tropics and requiring minimum agronomic input and care for growth, they can be very well fitted into the prevailing cropping systems. They are the most efficient converters of solar energy and have the ability to reserve energy in the form of carbohydrate in the bulky roots and hence tuber crops are also called as calorie density crops. Tuber crops, though branded as poor man’s crops in rural areas have considerable unrealized potential for processing into high end products for food, feed and industrial uses. They are generally consumed as vegetable after boiling it in water and eaten along with some spicy curry or by extracting starch or flour. Besides serving as an insurance crop during times of food scarcity, it can also function as an industrial raw material for a wide spectrum of products

Introduction

Baking is a traditional activity which has a long history, and according to some recent discovery, it is indicated to be dated back to as early as around 21,000 B.C. It is termed as a complex operation of prolonged heat transfer through radiation, convection, and conduction. Baking is considered to be one of the oldest methods of cooking, most commonly the bread baking but it is not only limited to the bread instead it provides a wide range of products such as cookies, pastry, pizzas, breakfast cereals, etc. Baking includes lots of raw materials such as flour, water, yeast, milk and milk derivatives, shortening, sugars, eggs and some minor ingredients such as malt products, cocoa products, dough improvers, inhibitors of microbiological spoilers, spices, etc. Food items which are rich in sugar and carbohydrates such as chocolates, candies are known as confections, and the art of making these products is termed as confectionary. Confectionery can be broadly classified into two major categories, namely sweet confectionary and baked confectionery. Conventionally cake was defined as the flour based sweet food, whereas bread was defined as the flou-based non-sweet food.

Baked confectionery, also known as flour confectionery includes products such as cakes, pastries, and similar baked goods, especially which are served in dessert. These delicacies hold history not much later to the bread baking. Earlier the baked confectionery especially cakes were only affordable by the rich and were prepared for special occasions such as festivity, celebrations, etc. but now a large number of flour confectioneries are being produced in the world which is delightfully acceptable and are much more in demand by a various group of people.

Wheat Production and Consumption

Wheat, rice, maize, barley, sorghum and the millets are the main crops that provide nutrition to people worldwide. The production of grains in different countries depends on the various factors such as water availability, soil conditions, temperature, cultural and economical are most critical factors. Nutritional needs of the developing countries are more dependent on cereal grains compared to the developed ones. Approximately 60% of the calorie requirements in the developing countries are met from cereals. The International Grains Council (IGC) forecasted for total grains production in 2017-18 to 2.079 billion tonnes. There is a need to have major research to increase their productivity, reduce storage losses, enhance efficiency of processing and to ensure food safety in the entire supply chain. Among them, wheat is one of the most important crop species and is a staple food for about 35% of the world population. Wheat is unique among the grains because of its protein type, which when mixed with the water by mechanical forces yields into viscoelastic dough due to the formation of gluten. This unique property of dough is capable of retaining the gases which are produced by yeast or baking powder resulting in the production of an array of leavened products such as bread, cookie and cake.

Wheat is also an important source of dietary proteins for humans but like other cereals, it is deficient in the essential amino acid lysine. Wheat crop is adaptable to the wide range of growth conditions compared to other major cereals and hence it is cultivated widely throughout the world. Wheat cereal is the major dominating staple in the North Africa, Central and West Asia, providing the 50% of the calorie requirement in the region. The world wheat production is 740 million tonnes, with China ranking first by producing 125 million tonnes of wheat annually. Other major wheat producing countries are India, USA, Russia Australia, France and Canada. The global per capita consumption of wheat is about 66 kg, which varies widely in different regions. In Algeria, Egypt, Israel and other Middle East as well as Eastern Europe the consumption of wheat flour is high (150 kg/year). The food uses of wheat in developing countries are more than 80%, while in developed countries it is less than 50%. The consumption of the wheat in developing countries is significantly increasing due to globalization and growing economies. After rice, wheat is a major cereal crop in India and contributes to more than 50% of the total calories. It is grown in the cooler regions of India during the period of November to April. In grain production, rice ranks first with the production of about 105 million tonnes per year. In India, total grain production is 136 million tonnes for the year 2016-17 as per the International Grains Council. India ranks second in the production of wheat in the world and produce about 95 million tonnes annually. The bread wheat (astevum) contributes to approximately 94% while durum wheat is 4% and dicoccum wheat accounts to 2%.