eChapters

Dairy byproducts constitute an important segment of dairy industry. An important criterion in the economic choice of any process is the efficient utilization of byproduct that is produced along with the main product. The main byproducts of dairy industry are skim milk, buttermilk, whey and ghee residue. Each and every component of milk must be judiciously processed into edible form not only to improve the profitability of dairy industry but also to make best use of the unique nutritional value of the precious milk constituents on one hand, and to prevent environmental pollution, on the other. However, dairy plants, particularly in India, are usually confronted with the problem of byproduct utilization, especially that of whey and ghee residue in economical manner.

Skim milk is a byproduct obtained during the manufacture of cream. It is rich in solids-not-fat content and has high nutritional value. In dairy plants, it is mostly utilized either in standardization for the manufacture of main dairy products or preserved by removing moisture in milk powder form. The skim milk when utilized in either of these two forms or consumed as liquid, is not considered a byproduct. It is regarded as a byproduct only when it is either not economically utilized or utilized for derived byproducts, like casein and other related products, co-precipitates, protein hydrolyzates, etc.

Buttermilk is the byproduct obtained during butter manufacture. Sweet cream buttermilk resembles skim milk in gross chemical composition and is usually admixed with bulk of skim milk for further spray drying or even product manufacture in dairy plants. Desi buttermilk, on the other hand, has long been an important domestic beverage in India. It has high nutritive and therapeutic value. It also finds its way in the preparation of a host of culinary dishes such as kadhi, dhokla and idili. Also a number of federations and private plants sell salted and spiced buttermilk in 200 ml pouches.

Operation Flood and dairy cooperatives became India’s greatest rural employment programme, enabling the modernization of the dairy industry to a point from where it may take off to fulfill the need for milk and milk products within the nation as well as chances on the international market. An unorganized sector handles 80% of the milk a rural producer produces, and an organized sector handles the remaining 20%. It has been discovered that dairy cooperatives significantly contribute to reducing rural poverty by increasing rural milk production and marketing.

Livestock Population and it’s Economic Contribution

According to 18th Livestock census of India (2007), India has about 199.1 million cattle, which constitute 44.29 per cent of Asian and 12.7 per cent of the world cattle population. The current buffalo population is 105.34 million which accounts 57 per cent of Asian and 55 per cent of the world buffalos. The major output of the entire livestock sector is from the milk, which is the second most agricultural commodities next to paddy. According to the annual report of the Ministry of Agriculture and Cooperation, during 2006-07, the contribution of milk alone (Rs.1,44,386 crore) was higher than paddy (Rs.85,032 crore), wheat (Rs.66,791 crore) and sugarcane (Rs.28,488 crore). The value of output from meat group animals as per estimates of Central Statistical Organization (CSO) at current prices was Rs. 34, 310 crore during 2006-07. Total export earnings from livestock, poultry and related products were Rs.5,213.80 crore during 2006-07. Eighty percent rural households keep livestock for their subsidiary income, important for employment, livelihood, nutrition, constant flow of quick and fast income, reduces the vulnerability of agricultural production. Trends indicate that animal protein consumption would rise proportionately with increase in income. The 18th Livestock Census (2007) has placed the total livestock population at 529.698 million and total of poultry birds at 648.830 million.

Milk processing plants involve processing of raw milk into products like market milk, cheese, butter, ice cream, condensed milk, dried milks and traditional dairy products. The by-products processing includes buttermilk, whey and its derivatives. Dairy effluents contain dissolved sugar, protein, fat and minerals. Spills and leaks of products or by-products, residual milk or milk products in piping and equipment before cleaning, wash solutions from equipment and floors, condensate from evaporation processes and cheese trimmings are some of the sources of dairy effluents in a dairy plant. The key parameters are the biological oxygen demand (BOD), chemical oxygen demand (COD), total suspended solids, total dissolved solids etc. Common dairy waste techniques include grease traps, oil water separators for separation of floatable solids, equalization tanks. Biological treatment consists of aerobic and anaerobic process.

Introduction
Demand of dairy products is on the rise in India. India‘s demand forecast for milk and milk products is more than the current supply of these products. To meet this demand entrepreneurship initiatives are need of the hour. Further, younger generations of India are more interested in commercial dairy farming rather than subsistence based farming. Therefore, scientific as well as commercial dairy entrepreneurial training to farmers about advanced technology used in breeding, feeding, housing and healthcare is essential.

a. Barriers for Entrepreneurship in dairy

An average dairy entrepreneur faces several barriers to start a new enterprise. Some of them are as under

    1.    Lack of financial support: A major stumbling block for many dairy farmers to expand production or diversify into new high value enterprises is lack of access to finance. Farmers who are starting new enterprises often face difficulty raising investment capital.

Dairy Industry in India
Milk holds a deeply symbolic place in Indian culture, far beyond its role as a mere food item. It is intricately woven into the cultural and historical identity of the nation, with the dairy industry serving as a cornerstone of India’s economy. The sector is a driving force behind rural development providing a crucial pathway to prosperity for millions of small-scale farmers. It plays a significant role in alleviating poverty and generating employment opportunities. The dairy sector by empowering farmers, developing modern infrastructure embracing technological advancements, and promoting sustainable practices, fostering widespread socio-economic progress in rural India. In the 1920s, modern milk processing and marketing technologies were introduced in India. The National Dairy Development Board (NDDB; founded in 1965), implemented Operation Flood (1970-96) to modernize the dairy sector through cooperatives. This led to the rise of dairy cooperatives countering the exploitation by private milk plants. The cooperatives followed the Anand model, a three-tier structure comprising village-level societies (producers), district-level unions (milk collection and processing), and state-level federations (marketing). Originating in Anand, Gujarat in 1946, the model was later adopted nationwide. The progress termed as White Revolution transformed India from a nation struggling with milk shortages into the world’s largest producer and consumer of milk. By 1997, India became the global leader in milk production with a volume of 70.9 million tons, surpassing the United States (FAO data rearranged by Our World in Data). Further in the year 2014, for the first time, it beat the entire European Union. Since 1950, India’s milk production has seen tremendous growth, rising from 17 million tonnes in 1950-51 to 230.58 million tonnes in 2022-23. The per capita availability of milk increased from 124 g/day in 1950-51 (PIB 2022) to 459 g/day in India during.

DAIRY BUSINESS

Most ambitious young men at some time or another are likely to develop an interest in going into business for themselves. This is prompted not only by the thought that a person owning his own business is more independent but also by the hope of increasing personal income. However, when these same young men look about them and see the general existence of “big business” in practically all lines of endeavour, they often lose courage and decide to remain as workers with some company where they can enjoy a certain degree of security. 
The general condition is an important factor in determining the success of new business enterprises. Similarly, innovations like the creation of new products or the development of new methods of merchandising often gives rise to opportunities for a new business enterprise. The introduction of “Softy” ice cream and other soft-served frozen products made it possible for several hundred small businesses to get established in our country. The advent of single- service paper container was the spark that started several milk-plant operations which later grew into companies of considerable size. Ironically, the paper milk container also spelled the doom for many older independent plants that could not or did not adjust soon enough to this new way of packaging. The chocolate-coated ice-cream bar idea started a number of new enterprises which grew from small companies going to concerns of considerable size. Vending machines made it possible for many small companies to get started selling milk, ice cream, candy and lassi etc. 

Introduction

The dairy industry is a cornerstone of worldwide agricultural economies, underpinning nutrition, employment, and rural development. India stands out among nations with thriving dairy sectors, accounting for approximately 23% of global milk production (Prasad et al., 2023). With advent of Operation Flood in the late 1970s, India’s dairy industry has undergone transformative changes. This movement revolutionised milk production, rural income, and the organisation of cooperatives. The Indian dairy sector is still unorganized and only 18-20 per cent of the total milk produced is handled by organized sector (Gowda, 2023). There is rising trend of value addition along with rising demand of processed dairy products in India. These changes underscore the importance of effective dairy plant management systems, where strategic oversight of milk procurement, processing, and product manufacturing ensures quality, efficiency, and sustainability.

The GOI is pushing to strengthen infrastructure for the production of quality milk, as well as for procurement, processing, and marketing of milk and milk products through the following Dairy Development Schemes:

6.1. Dairy Entrepreneurship Development Scheme (DEDS)

Dairy Entrepreneurship Development Scheme (DEDS) was started in September 2010. This scheme is being implemented through NABARD which provides financial assistance to commercially bankable projects with loans from Commercial, Cooperative, Urban and Rural banks.

Objective of the scheme

To generate self-employment and provide infrastructure for the dairy sector, to set up modern dairy farms and infrastructure for the production of clean milk, to encourage heifer calf rearing for conservation and development of good breeding stock, to bring structural changes in the unorganized sector so that initial processing of milk can be taken up at the village level, to upgrade traditional technology to handle milk on a commercial scale, to provide value addition to milk through processing and production of milk products.

1.1. Global Dairy Scenario

Global milk production is forecast at 852 million tonnes in 2019, an increase of 1.4 per cent from 2018 (DAHD, 2019) – a smaller rate of growth, reflecting downward revisions made for India and the European Union. Much of the anticipated output expansion will originate in India, Pakistan, China, the European Union, and Brazil, partially offset by declines in some countries including Australia, Colombia, and Argentina. In India and Pakistan, herd expansions drive output growth, while in China, farm efficiency improvements underpin higher growth. The output is increasing in the European Union, although slowly as dry weather limited the supply of milk during the summer, whilst rising dairy herds and stable milk prices are supporting higher production in Brazil. By contrast, the output may decline in Australia and Colombia due to dry weather, whereas in Argentina, rising feed costs and restrained consumer demand may dampen production. Elsewhere, in the United States, higher milk yields hold up the growth momentum, whereas, in New Zealand, favourable weather corroborates a positive production outlook (DAHD,19).

Abstract

Now-a-days non bovine milk become an area of interest for their potential to provide nutrients along with beneficial health effects. Deer belongs to cervidae family, is one of the source of non bovine milk. Two thousand years ago, the people of Soviet Union along the borders of Russia, Mongolia, and China used to consume deer milk and milk product. Deer milk is a plentiful source of milk solids. The proteins of deer milk is more digestible than bovine milk owing to their unique profile and characteristics. Deer milk being rich in highly digestible protein offers beneficial health effect through bioactive peptide production. The distinctive physico-chemical properties being quite similar to sheep milk shows the milk product manufacturers a scope to use deer milk for production of various dairy products. Although there is immense opportunity to use deer milk for development of diversified functional products, further research work is needed to be carry out to find out the type of biopeptides produced during protein hydrolysis, role of fatty acids, effect of different unit processing on its constituents etc. This chapter delineates the nutritional profile and physico-chemical properties of deer milk along with the significance of it in terms of its therapeutic roles and potential to be used for product development.

Ice cream defects can result from formulation imbalance, poor ingredient quality, processing deviations, inadequate freezing or hardening, packaging problems, storage conditions, and cold-chain failures. This chapter provides a systematic framework for understanding, classifying, diagnosing, and correcting defects affecting flavour, body, texture, melting, colour, appearance, packaging, and storage stability. It emphasizes that a visible defect in the finished product may originate much earlier in the production or distribution chain. Examples include iciness caused by slow freezing or temperature abuse, weak body associated with formulation or overrun, and flavour problems originating from raw materials or microbial activity. Defect analysis therefore becomes an important tool for troubleshooting, quality improvement, training, and preventive action.

1.1. General Discussion of Milk

“The cow is the foster mother of the human race. From the days of the ancient Hindoo to this time have the thoughts of men turned to this kindly and beneficent creature as one of the chief sustaining forces of human life”.

William Dempster Hoard (1836-1918)
Former Governor, State of Wisconsin, USA (1889-1891)
Founder of Hoard’s Dairyman (1885)

The oldest written records of the human race are in Sanskrit and are preserved in India. At the time these records began, about 6,000 years ago, milk had already become an important article of food. In fact, so important was the cow to these early people of South and Central Asia that wealth was measured in numbers of cattle, and the cow was in time made a sacred animal and is still so considered in India.

According to the best authorities, the domestication of cattle must have occurred somewhere between 6,000 and 10,000 years ago. The cow was worshipped in Babylonia, and in Egypt about 20,000 B.C. Over fifty references to cows and milk are found in Old Testament and the Promised Land was described as “a land flowing with milk and honey”.

Milk is the only food of the young mammal during the first period of its life. The substances in milk provide more energy and the building materials necessary for growth. Milk also contains antibodies which protect the young mammal against infection. A calf needs about 1000 litres of milk for growth, and that is the quantity which the primitive cow produces for each calf. There has been an enormous changes since man took the cow into his service. Selective breeding has resulted in dairy cows which yield more than 5,000 litres of milk per calf, i.e. five times as much as the primitive cow. Some cows can yield 10,000 litres or more.

Introduction

Flowering plants (Angiosperms) are identified by their morphological characteristics like flower, fruit and seeds that help their taxonomic characterization into different species, genera, families and orders. The floral characters which are used for taxonomic characterization of plants include the type of inflorescences, perianth structure, floral symmetry, arrangement of floral leaves, type of androecium, stamens, gynoecium, carpel, ovule, etc. The type of fruit and seed also play important roles in taxonomic classification. In this chapter we will briefly discuss about various morphological features of flowering plants (in botanical terms) that are useful in taxonomy.

Nomenclature of Plant

Nomenclature of plant is the formal and scientific naming of plants. It is related to but distinct from taxonomy for grouping and classifying plants and provide botanical name.

The scientific/botanical nomenclature started with Species Plantarum by Carolus Linnaeus in 1753. Botanical nomenclature is governed by the International Code of Nomenclature for algae, fungi, and plants (ICN), which replaces the International Code of Botanical Nomenclature (ICBN).

ICBN and ICN

International Code of Botanical Nomenclature, (ICBN) was adopted by the VIIth International Botanical Congress held in Stockholm, July1950. While the International Code of Nomenclature for algae, fungi, and plants (ICN) was adopted by the XVIIIth International Botanical Congress held in Melbourne, Australia in July 2011.

Commercial ice cream represents a highly diversified category influenced by formulation, processing technology, regulatory standards, consumer preferences, cost structures, and market positioning. This chapter explains the meaning and characteristics of commercial ice cream, with particular attention to the Indian regulatory and market context. It examines major commercial product types, their compositions, ingredient functions, and differences from artisanal products. The chapter also discusses contemporary market trends and changing consumer expectations, including premiumization and alternative formulations. Quality challenges such as ice crystal growth, sandiness, shrinkage, weak body, coating defects, and cold-chain failures are considered, providing readers with a practical understanding of commercial ice cream production and positioning.

1 Detection of Starch Introduction

Starch is widely available in several forms such as wheat flour, corn flour and commercially manufactured starch. It is extensively used by adulterators to raise the SNF content in the milk. When high amounts of starch are added to milk, it can cause diarrhea due to the indigestion of starch in colon. Apart from this, accumulation of starch in the body may prove very fatal for diabetic patients. In this method, starch in milk can be detected by using iodine solution. Iodine from the iodine solution gets absorbed on the starch molecule surface and resultant product of adsorption has deep blue colour.

Reagents

 • Potassium iodide

 • Iodine solution - 1% (Add 1 g of iodine and 5 g of potassium iodide in

distilled water and dilute to 100 ml)

A. Estimation of Calcium

Requirements : Pottasium permanganate solution (0.1N) – Dissolve by heating 33g of potassium permanganate in 1000ml distilled water and allow to stand in coloured bottle for several days. Filter contents through 6mm thick film of asbestos mat on Gooch crucible.

Asbestos mat – Digest asbestos with dilute hydrochloric acid(1:3) for 2-3 days, wash free from acid and digest with 10% sodium hydroxide for few days, wash free from alkali. Digest with dilute Nitric acid(1:3) for several hours and wash. Shake with water into fine pulp and digest with 0.1N potassium permanganate solution that has been acidified with dilute sulphuric acid (1:3), for 1 hour and wash. Use this pulp for layering 6mm film on Gooch crucible.

Dilute hydrochloric acid (1:4), Ammonium hydroxide solution (1:1), Saturated ammonium oxalate solution, Diluted sulphuric acid (1:4)

Introduction

Meaning of Entrepreneur

The term “entrepreneur” is derived from the French verb entreprendre, which means “to undertake.” Historically, its meaning has evolved. In the early 16th century, it referred to individuals involved in engineering tasks like construction. By the 18th century, the term came to describe those engaged in economic activities. Over time, the concept of an entrepreneur shifted from someone participating in military ventures to someone actively involved in business and economic pursuits. Today, an entrepreneur is defined as an individual who innovates, organizes resources, and takes on risks to create new ventures or products with the goal of generating profits.

Richard Cantillon was the first who proposed the term “entrepreneur is an agent who buys factors of production at certain prices in order to combine them into a product with a view to selling it at uncertain prices in future.”

Introduction

A marketing plan is a strategic document that guides an organization in generating leads and engaging with target customers. It serves as a roadmap for how a company will approach the market, akin to a job description for the business. Every organization needs a well-crafted marketing plan that is tailored to its specific objectives, regularly updated, and aligned with customer demands. Companies with a solid marketing plan tend to be more successful and outperform their competitors compared to those without one.

The marketing plan outlines a strategy for growth by detailing how a company will attract and retain customers. It is an integral part of the overall business plan and lays the foundation for future market opportunities. A strong marketing plan focuses on customer needs and provides a clear roadmap for launching new products, expanding the customer base, and boosting the company’s profile. It includes essential elements such as business goals, mission, budget, and strategies. A well-designed marketing plan ensures effective promotion of products and services, helping businesses reach their target market and track success. Moreover, it should be flexible and adaptable to the evolving market landscape.

Abstract

There are enormous food processing industries comprising of grains and oilseeds milling, fruits and vegetables processing, spice grinding and other food processing units in India. Also, there are many seed processing companies in the country, which are engaged in the processing and production of good quality seeds of different crops besides National Seeds Corporation and State Seed Corporations. All industries are using different type of machinery and equipment like cleaner, grader, expeller, milling machines, polishers, dehusking machines, size reduction equipment, different type of grinders, separators, treatment machinery, mixers, pulverizes etc. Besides this equipment, material-handling equipment like conveyor (belt, chain or screw type), elevators, holding bins and other handling equipment are also frequently used in the processing plants. To meet the above requirement many firms are also involved in the manufacturing of these equipment and machinery. Since, most of the seed processing equipment, dhal milling plants, material handling equipment are manufactured by the unorganized sector and hence equipment and machinery fabricated by them are not of very good quality. However, Bureau of Indian Standards has formulated the codes of manufacturing for these equipment and machinery. Seed processing equipment manufactured in India are generally copy of imported processing equipment. The manufacturers do not use materials of good quality. Framework of the machines is very poor. These machines are not also tested for their efficiency, 

Introduction

Oils and fats are utilized both for their food applications as well as for industrial purpose. As a food product, oils and fats are consumed in a variety of forms such as shortening, ghee, butter, margarine, cooking oil, salad oil, etc. Other uses include their usage in the form of lubricants, greases, soaps, cosmetics, paints as well as animal feed and biofuels. Among the Asian countries, Indonesia leads as the prime producer with more than fifty percent of the total palm oil production in the world. As a second-best producer of oils and fats, China was the major manufacturer of rapeseed as well as soybean oil in year of 2018. In general, Asian countries contributed to more than fifty percent of the total fat and oil manufacturing in the world in 2018 (Kushairi et al., 2018). Even though fats and oils are primarily utilized for food applications, there has been an increased interest in their industrial utility for the manufacture of biofuels. Fats manufactured from various animal sources like tallow or lard also contribute to a considerable quantity and compete with vegetable oils for the production of biofuels.

The resources for producing oils and fats are diverse depending on their end use, yet they are obtained from two major sources: animal sources and plant sources. Oils and fats are used as starting materials for the preparation of shortenings, margarines, and other tailored products that further act as functional ingredients in food products prepared by food processors, restaurants, and in home. They have been used for food and other variety of applications since the prehistoric times, due to their easy availability. For example, fatty tissues from animals liberate free-floating fats on being boiled, whereas oil can be pressed out from oil fruits and oilseeds.

The role of dietary oils and fats in human nutrition is also one of the important areas of interest. Over the time, oil and fat industry has provided significant contributions toward nutritional improvement of various products. With the growing concern linked between cardiovascular diseases and consumption of oil and fat products, low-calorie variants of different foods, free or low in cholesterol are also available now. Excessive fat consumption among the populations of developed countries and consequences of obesity has led to the development of reduced-fat and very-low-fat variants of foods.

Introduction

Digestion may be defined as the hydrolytic process carried out by various enzymes for breaking down complex food components such as proteins, fats and carbohydrates into simpler molecules like amino acids, fatty acids and monosaccharides, respectively. Whereas, absorption may be defined as the movement ofthese simple soluble digested food componentsalongwithvitamins, minerals and water from gastrointestinal track into the circulatory system.

The process of digestion starts from oral cavity (mouth) and ends at large intestineincluding tongue, teeth, jaws,secretions from salivaryglands (parotids, sub maxillary or submandibular and sublingual glands), pharynx, esophagus, stomach, small intestine and digestive enzymes secreted from pancreas and liver.

Digitalization is transforming ice cream operations by connecting procurement, production, quality, cold chain, sales, distribution, finance, and management through integrated information systems. This chapter examines the transition from traditional manual operations to ERP-, AI-, IoT-, and data-driven management. It explains the costs of limited digitalization and the department-wise benefits of integrated systems, including better traceability, demand forecasting, inventory management, energy monitoring, cold-chain control, predictive maintenance, and profitability analysis. The chapter also explores artificial intelligence, business intelligence, IoT monitoring, and evidence from industry research. It emphasizes that technology alone is insufficient: standardized processes, accurate master data, user training, governance, and management discipline are essential for achieving measurable digital transformation.

4a. Intestinal Disorders
 
History of health claims
 
According to Bottazzi (1983) it was in 76 BC that the Roman historian Plinius recommended the use of fermented milk for treating gastroenteritis. Metchnikoff claimed that the intake of fermented milk containing Lactobacilli reduces the toxin producing bacteria, thereby increasing the longetivity of the host (Metchnikoff, 1908). Tissier (1905) showed that there was an increase in the Bifidobacteria in breast fed-infants, thus claiming that the administration of Bifidobacteria to infants suffering from diarrhea was very beneficial as they supersede the putrefactive bacteria that causes the disease. Intestinal beneficial microfloras are responsible to resist the disease (Bohnhoff et al., 1954).

The distribution systems are designed to ensure that processed fluid milk is stored and transported under optimal conditions, maintaining its quality and freshness until it reaches consumers. An effective distribution system for processed fluid milk involves careful planning and execution to guarantee timely delivery, quality preservation, and customer satisfaction. Given that milk is a highly perishable product, it requires meticulous handling and strict temperature control. Technology plays a crucial role in preserving its integrity throughout the supply chain. The use of technology reduces human error, increase the efficiency of distribution operations, and lower operational costs by preventing idle resources through coordinated logistics for both outbound and inbound trips.
To address the specific demands of manufacturing, packaging, distribution, and transportation, integrated business process automation solutions are implemented. These solutions include following features:
• Identify and define the most efficient delivery routes, reducing transportation costs and ensuring timely delivery.
• Scheduling and monitoring of delivery routes to maintain optimal delivery speeds, and manage loading and unloading processes so as to minimize exposure to adverse conditions. Automated solutions and tools help maintain the required temperature conditions throughout the entire supply chain.
• Verify and document supplier practices to ensure that all partners in the supply chain adhere to the agreed-upon temperature standards. Store the temperature-related data to help in auditing and analysis, and continuous improvement of the cold chain process.
• Shelf life and expiration date management is a critical component in  the storage and transport of dairy products. Proper management ensures that dairy products remain safe for consumption and retain their quality throughout the distribution chain.

Introduction

Lactic acid bacteria (LAB) are characterized as Gram-positive cocci or rods, non-aerobic but aerotolerant, able to ferment carbohydrates for production of energy and lactic acid. Lactic acid bacteria includes different major genera: Lactococcus, Enterococcus, Lactosphaera, euconostoc, Melissococcus, Oenococcus, Pediococcus, Streptococcus, Tetragenococcus, Vagococcus and Weissella. Other genera are Aerococcus, Microbacterium, Propionibacterium and Bifidobacterium. Through carbohydrate fermentation along with lactic acid, various organic acids are produced due to which there is a fall in pH level and creates unfavorable environment or inhibits growth of some undesired microorganisms. The low pH makes organic acids lipo -soluble, allowing them to invade into cytoplasm of pathogens by rupturing cell membrane. LAB are generally regarded as safe (GRAS), and have a significant role in the preservation of foods and fermented products. Under controlled conditions they can be used as natural competitive microbiota or as specific starter cultures. Antagonistic substance like bacteriocins are produced from lactic acid bacteria that inhibits the activity and growth of other bacteria and these bacteriocins are active against various pathogens in minimum concentration. These are antimicrobial peptides modified by post -translational mechanisms and exported to the extracellular medium. Till date about 239 bacteriocin producing LAB genome and 789 putative bacteriocin producing genes cluster are stored in the public databases. Many gram positive and gram negative bacteria in the environment produce bacteriocins.

A laboratory is essential for research work in science and development. Most of the research institutes have dedicated laboratories for researchers and students to conduct experiments, perform research work, as well as to provide hands-on learning/training to students. There are certain rules and regulations laid down by the laboratory in-charge which need to be followed strictly for safety purposes. Some of the laboratories keep ‘safety manual’ for researchers to read before entering into the laboratory to conduct experiments. Whenever safety is compromised in a laboratory, there is increase in risk of unwanted incidents in the laboratory. Storing food/beverages in the same refrigerator where laboratory chemicals are kept may lead to disastrous effects on health. This chapter aims to provide instructions in brief on the things to be performed (Do’s) before and after entering onto a laboratory as well as the things never to be done (Don’ts) in a laboratory for the safety reasons.

Good Laboratory Practices (Do’s)

• P Wear apron/labcoat while working in the laboratory.
• P Use gloves/respiratory mask/fumehood while handling toxic/volatile/inflammable chemicals/reagents.
• P Use pippet or pippetor for safety in transfer of solutions.
• P Protect eyes, face and naked parts of the body from UV radiations. Use safety goggles or face mask/apron.
• P Keep your eyes away from Liquid Nitrogen and use cryogloves while handling it.
• P Arrange all the necessary materials/solutions before starting the experiment.
• P Periodically fumigate/ozonize culture and inoculation rooms.
• P Autoclave all contaminated materials before discarding.
• P Pre-treat gel or solution containing Ethidium Bromide (EtBr) before discarding into laboratory waste-disposal bin, and use gloves while handling them.
• P Burn all the transgenic plant materials in an incinerator after taking necessary observations.
• P Make entry in the designated log-book and clean the instrument after using it properly.
• P Switch-off the instrument after use or when not in use.
• P Wash hands with soap and remove the labcoat before leaving/going out of the laboratory7.
• P Ensure that switches for fans/lights, and water taps are off while leaving the laboratory.
• P Follow the biosafety guidelines suggested for handling and disposal of the hazardous chemical.

Abstract

The milk from non-bovine species is gaining considerable attention mainly due to the fact that it is consumed by sensitive consumers (infants and elderly). Donkey milk possesses various health benefits, namely, anti-microbial activity, immunomodulation, hypoallergenicity, prevention of cardiovascular diseases which are elaborated in details here. Similarity in nutrition profile among donkey and human milk is discussed in detail. The donkey milk’s yield, its milking technique, effect of lactation on chemical composition and the microbial aspect is also described. As, availability of donkey milk is limited, therefore its processing becomes essential for its usage over a long period of time. Preparation of various donkey milk products like yoghurt, ice cream and cheese are also described here.

As the flow properties of liquids play such an essential role in our daily lives, whether intentionally or unintentionally, no one is truly an absolute beginner when it comes to rheology. Consumers not only focus on new and improved products but also consider the texture of the products e.g thick and creamy

Introduction

Dough is a complex mixture of flour constituents, water, salt and other ingredients depending upon the requirements of end-products. It is the principal intermediate stage in the transformation of wheat into different end-use products. Rheological properties of dough determine the behaviour of dough during mixing, rounding and molding used in making different products and also effect on the quality of finished product. Therefore, understanding the various features of dough rheology and their relations with product quality is important. The importance is enhanced further because of mechanization and automation of baking industry. Dough is composed of continuous phase in which gas cells are dispersed. The continuous phase is called “dough phase”. It consists of starch granules embedded in protein matrix along with some lipids, cell remnants and yeast cells in fermented dough. Gas production and retention is the most comprehensive quality requirements of the dough for bread making. The ability of the wheat dough to retain gas during fermentation and oven rise is unique. This depends on the ability of the dough to be stretched into thin membranes because of protein phase.

Abstract

Cocoa and coffee are highly sought after commodity crops in the market owing to the distinct flavor and aroma characteristics. Cocoa beans are mostly used in the manufacturing of chocolates and various types of confectioneries while coffee is mainly consumed in the form of beverages. Both cocoa and coffee need to be dried and roasted in order to produce the flavor precursors which further develop into the desired flavor and aroma in the finished products. This chapter aims to provide an overview of cocoa and coffee processing with particular emphasis on drying and roasting aspects and its impact on product quality.

Introduction

While experimenting with chemicals, sometimes we need to dry the chemical/ solution (solid, liquid or gas) using a process like evaporation or distillation, mainly to remove water or different solvents. Drying is the process of evaporation or distillation to remove water/solvent from a solution, solid or even from gas. Generally, a drying agent (usually an anhydrous inorganic salt) is used for this process, which reacts with the water (present in the chemical/ solvent to be dried) to form a hydrate. For example, anhydrous MgSO4 is one of the drying agents. The drying agents are recognized by their capacity (the rate at which they absorb water) and their intensity (the amount of water left behind in the solvent at equilibrium). No chemical reaction or change in phase occurs during the drying process.

Type of Solvents

Apart from water (a universal solvent), there are three families of organic solvents used in laboratories.

1) Oxygenated solvents: Alcohols, Ketones, Glycol ethers, Glycol esters, etc.

2) Hydrocarbon solvents: Aliphatic and Aromatic hydrocarbons.

3) Halogenated solvents: Chlorinated hydrocarbons.

The method of preserving various food stuffs by drying them, and thereby depriving microorganisms of the water necessary for their growth, has been known for centuries. According to Marco Polo’s accounts of his travel in Asia in 13^th century, soldiers of Kublai Khan carried dried milk on excursions. Before it was used, water was added to a portion of dried material. Mixing was accomplished by movement of the horse during riding on the trip. The recombined product was then consumed at the mealtime. The belief is that part of the fat was removed from the milk before drying and dehydration was accomplished by solar heating.

Drying is defined as the removal of the liquid, usually water, from a product by evaporation, leaving the solids in an essentially dry state. Today the production of dried milk and milk products has become important segment of dairy industry. Dry milk provides a means of preserving the excess milk supply during the flush season for use during the lean season. The value added dried dairy products like malted milk foods, infant food and infant formulae and dairy whiteners are convenient ready to use products having wide acceptance. The water content of milk powder ranges between 2.5 and 5%, and no microbial growth occurs at such low water content. Drying extends the shelf life of milk, simultaneously reducing its weight and volume. The main purpose of drying milk are: a) to improve the storage life of the product due to low moisture content, b) to reduce cost for storage and transportation of product due to reduced bulk, and c) to provide convenient product for utilization in many dairy and food preparations.

The production of dried milks to a great extent is now being governed by the market requirement and to some specialized use of such products. Considerable quantities of dried skim milk powders are being used extensively in the preparation of ‘Reconstituted and Recombined milks”. Milk powders are also used extensively in the manufacture of ice cream, bakery products, confectionary products, cottage cheese and in other cheese varieties. The greatest proportion of milk powder is utilized in confectioneries, such as milk chocolate, caramels, soft sweets, coatings, biscuits and cakes. In these products, milk powder has a special effect on the quality of particular products: it improves consistency, flavour as well as nutritional value and shelf life.

Abstract

Food proteins are among the commonly used ingredients by food manufacturers to produce different products with desired characteristics. Due to several nutritional and functional properties, proteins have different functions in various food products in addition to their role in metabolic system of the human body. Dilute or concentrated solutions of pure proteins or unprocessed food products which are rich in protein are very sensitive to deterioration or degradation by microorganisms and thus have short shelf life at ambient temperatures due to their highly moist structure and high protein content. Drying is one of the best methods that can guarantee preservation, a longer shelf life, chemical or thermal stabilization and resistance against other stresses. A full understanding of stresses encountered during drying is needed to choose an appropriate drying process and to optimize this process for maximum product quality. A number of methods have been used by various researchers to dry protein-containing foods. Among these methods, freeze drying and spray drying are the most common techniques. Sun drying, convective hot air drying, vacuum drying, heat pump drying, radio frequency drying as well as combined or hybrid drying methods with two or more of the drying methods have also been developed.

Introduction

Durum or macaroni wheat (T. turgidum var. durum) is an important crop used chiefly for the production of pasta in Western Europe and North America, and two layered bread, single layered bread, burghul, couscous, pasta, frek and feed in other parts of the world (Table 1). In North Africa and the Middle East, durum is also used for producing flat breads. On a global basis only a small amount of durum wheat is used for baking of pan-style and hearth-style bread. Also, durum wheat for baking is often used in blends with common wheat. In India, durum occupies approximately 2.0 mha area and production is estimated to be around 2.5-3.0 million tones annually amounting to 3-4% of the total wheat production. The consumption of pasta is increasing at the rate of around 5% annually and currently it is estimated to be around 10 Lakh tones. The demand for pasta products may increase further due to increasing population and improving standard of living.

Model Project for Setting Up 10 & 20 Cow Dairy Farm (Indicative)

    ·    The models are only indicative and in no way designed to provide exact economics. Following guidelines may be used by the interested persons to work out the details of their project, depending upon the local market and conditions.

    ·    An interactive module considering the land availability for fodder cultivation, willingness to opt for silage bunkers, type of chaff cutter (manual or machine operated), milking machine, mister set, etc. is under preparation.

    ·    The proposed interactive module would require preference for set of inputs and intended herd size and accordingly generate output outlining the estimated investment, cost and return.

Abstract

Garden peas of two cultivars (Pb-87 and Pb-88) were procured. Pods were shelled manually, grains were blanched and dehydrated. Other lot of peas of both the varieties was allowed to mature on the plant till the plant foliage dried up, harvested, pods were dried in shade for few days, shelled manually and grains were further dried in shade. Grits were prepared by grinding rice and pea (dhal) in a laboratory grinder to pass through 20 mesh sieve. Blends were prepared by mixing rice and pea grits in the ratio of 100:0, 85:15 and 70:30. The blends were subjected to extrusion cooking using Brabender single screw extruder. The extruder die pressure, specific energy consumption (SEC), expansion ratio, density, water absorption index (WAI), water solubility index (WSI) and organoleptic characteristics were studied. Addition of pea grits resulted in a decrease in die pressure in all the blends. Addition of pea grits showed a significant effect on SEC. A decrease in expansion with increase in the level of pea grits in blend was observed. The extrudates having lower expansion showed higher density values and vice versa. Effect of replacement of rice grits with pea grits on WAI was found to be significant. Level of pea grits significantly affected the WSI. Incorporation of pea grits in the rice grits significantly affected the sensory characteristics. Replacement of rice grits with mechanically dried pea grits resulted in deterioration of acceptability score, but addition of field dried pea grits improved the same.

Abstract

Paddy seeds of variety PR - 116 were obtained from the PAU seed farm. These seeds were cleaned with commonly used seed processing equipment. Samples were divided into 2 parts. One part was kept as such for taking the observations of feed (control) and the remaining part was passed through specific gravity separator for its refinement. The various fractions obtained were recovery, middlings, and rejections. These graded fractions as well as the feed were packed in 5-kg cloth bags and stored under ambient conditions. Different quality parameters viz. moisture content, physical purity, thousand grain weight, percent germination, root/shoot length, vigour index and speed of germination were recorded at 30 days interval. The physical purity, thousand grain weight, percent germination, root length, shoot length and vigour index were found to be higher in recovery and minimum for rejections while moisture content was highest for rejection as compared to all other fractions. Germination, root/ shoot length, vigour index and speed of germination increased with the duration of storage while moisture content, thousand-grain weight and physical purity followed a reversed trend. Compared to feed, the recovery had higher quality attributes after 4 months of storage viz. moisture content decreased by 0.3%; physical purity increased by 0.67%; thousand grain weight increased by 2.97 gm/ thousand grain, germination increased by 8%; vigour index increased by 481.1 points; speed of germination increased by 3.2 seedlings per day. The grading resulted in improvement in overall quality of sunflower seed.

Introduction

Proper electrical wiring and earthing are crucial for laboratory safety and functionality. A laboratory houses several installations/equipment that demand stable/continuous power supply. Inappropriate or faulty wiring and earthing may lead to significant risks, including electrical shocks, damage to equipment, and even incidence of fire. Therefore, understanding the requirements of electrical wiring and earthing is essential for designing, construction, and maintenance of laboratory. This chapter aims to provide a basic knowledge of electrical wiring and earthing necessary for a laboratory. Importance of earthing in mitigating electrical hazards and ensuring integrity of electrical installations are also described.

Basics of Electrical Wiring

Basic understanding of electrical wiring is necessary for laboratory safety and efficient electrical functioning. The potential difference between two electrical points (negative and positive) is known as Voltage, which drives the flow of electric current. This is measured as volt (V). The rate of flow of electricity in a circuit is known as Current (I), which is measured as ampere (A). Current can be either direct (DC) or alternating (AC). Opposition/resistance experienced in the flow of current in circuit is known as Resistance (R) and it is measured in ohms (Ω). Higher the resistance means lesser the current flows at a given voltage. The rate at which electrical energy is transferred/utilized in an electric circuit is known as Power (P), which is measured in watt (W). The Power can be calculated as the product of voltage and current (P = V × I).

Abstract

Increasing global demand for ‘fresh-like’ processed food products has forced food industries to investigate into various minimal processing techniques. Food processing in general has been associated with thermal processing, alone or in various combination with chemical and mechanical preservation and processing methods. However, thermal processing methods are energy intensive in nature and tend to reduce product quality and freshness at the cost of shelf-life gain. Advance technique such as microwave, radio-frequency and freeze drying do maintain the product quality but their implementation at industrial scale involves high operational and maintenance cost. An ideal processing method therefore would be one that can process food products without losing its quality, is energy efficient and is easily scalable. In this chapter, we discuss about ‘Electrohydrodynamic (EHD) Drying’, which is can be classified as a minimal processing technique. The heat and mass transfer principles involved in EHD drying have been extensively discussed and so has been the key consideration for designing an EHD drying system.

Introduction

The basic physiological structures of mammary glands in all species are almost same and are located externally in order to fulfill the milk requirement of neonates after parturition. The process of secretion of milk from the mammary glands is known as lacto genesis. Milk provides an almost complete nutrition to neonates from birth till weaning period. It is a complex mixture of various constituents like:

Lipids such a striacyl glycerols(TAG),phospholipids,cholesterols and other sterols, free fatty acids and fat-soluble vitamins

Carbohydrates such as lactose, oligosaccharides

Proteins such a scaseins, α-lactalbumin, β-lactoglobulin, immunoglobulin’s, bovine serum albumin, lactoferrin, lysozyme, enzymes, hormones and growth factors

Non-protein nitrogenous compounds like urea, creatine, creatinine, uric acid and amino acids

Major and minor minerals, water-soluble vitamins and cells (leucocytes, macrophages, and epithelial cells).

Abstract

Consumers are now more conscious about quality and source of their foods. Attempts made to determine the quality of food materials are numerous, but most of them are destructive in nature. In recent years, nondestructive methods of quality evaluation have gained momentum and a considerable attempts have been made to develop them. This paper describes application of these non-emerging technologies: magnetic resonance imaging, x-ray computer tomography, near infrared spectroscopy and a few other important techniques for determination of different quality attributes with special emphasis on grain, and discusses their pros and cons for practical exploitation.

Employee motivation and job enrichment are described as two management techniques used to improve human behaviour and attitude towards work, with a view to utilize available human resources more efficiently and thus make man-management more effective. Just as the employee has certain wants that the organization is expected to satisfy, the organization too expects certain types of behaviour usually termed as ‘Direction’ or ‘Motivation’. Obviously this managerial function is not so easy, as it involves many problems, and it is these problems and their possible solutions that one is concerned.
Job enrichment is also a motivational problem created by the alienation of employees from their work, or by lack of their interest in their work. Here the problem is how to make the work more interesting, purposeful and acceptable to employees so that they may perform it more enthusiastically and with a greater sense of responsibility. Like motivation this is also a problem of human behaviour and work attitude. In fact both employee motivation and job enrichment are the problems which every supervisor and manager has to face while working and making their subordinates work.

Introduction

Over the years, processed food industry has become the largest growing industry in the world. The convenience food industry with the state of the art technology has been proved very successful in reaching every household and have started replacing fresh and healthy foods with the processed ones (Srinivasan and Shende, 2016).

Demand for processed and convenience foods are constantly on rise and convenience food segment is rising by leaps and bounds. Changing life style, food habits, displacement of rural population to urban centres, insufficient time to prepare healthy food and changing socio economic needs have led to the industrialization of the food supply and resulted in the development of convenience foods and today a great variety of the same are available for sale to the consumer throughout the world (Tillotson, 2003).

These convenience foods are available readily, convenient, inexpensive with pleasing organoleptic quality, requires minimal or no preparation before consumption. Varieties of convenience foods which are available in the market play a prominent role in the food choice of today’s consumer, and they include frozen and canned vegetables, bakery products, soups, sauces, prepared meat and fish, chilled and frozen dairy products as well as ready to eat and shelf stable products (Tillotson, 2003).

Rapid switchover of the consumer from the traditional dining practices to fast food centres, generally feed on quick and easily made products called fast foods, often termed as unhealthy junk foods. These foods are rich in saturated fatty acids, several refined components, high carbohydrates etc., which ultimately lead to the negative impact on physical and mental health of the consumer, contributing to several chronic diseases such as cardiovascular complications, cancer, atherosclerosis, liver disease, type 11 diabetes (Veggie et al., 2018) etc.

Therefore, focussing much about the health of the consumer, there is a great need for a healthy and a balanced diet to meet the basic needs of the human body (Mendes et al 2013) with an appealing organoleptic properties and appearance.

Abstract

Design, operation and optimization of dryers demands the calculation of energy consumption, in most cases in the form of thermal energy, equipment sizing, temperature and moisture distribution of solids as well as temperature and humidity distribution of drying air. Energy calculations are very important as drying is a widespread process in a variety of industries and is highly energy demanding. In the energy analysis of the process the first step is the estimation of the minimum energy requirement followed by the estimation of energy rejection through solids stream and especially through drying air. Increase of thermal efficiency is always willing and the two most common ways for its achievement is the application of heat exchange between cold feeding air and relatively hot rejecting drying air and hot air recirculation. The later is also employed for the adjustment of air temperature and humidity gradient through the dryer. The combination of a heat pump with the dryer decreases considerably the thermal energy consumption but demands electricity and the method can be beneficial in cases of excess electricity production in the process plant, e.g. by cogeneration. Utilization of exhaust hot air from the main drying unit for the predrying of wet solids can also decrease the total energy requirement. The application of humidity adsorption from the feed air increases its drying potential, but regeneration of adsorbent is required. Grand composite curve of the process plant can reveal potential heat sources from different unit operations.

Introduction

Entrepreneurship has become a major driver of economic development in recent years. It involves starting new businesses or revitalizing existing ones, often through recognizing and seizing new opportunities. Entrepreneurs are individuals who organize, manage, and take on the risks of a business venture with the aim of making a profit. They identify market opportunities and introduce new technologies and organizational improvements. Entrepreneurs constantly innovate and create value from these opportunities. According to Hisrich (1990), entrepreneurs are proactive and creative individuals who can organize resources and manage risks and failures to succeed.

To grow as an entrepreneur, it is essential to develop and refine key entrepreneurial traits. These traits shape an entrepreneur’s skills and abilities, aligning with their motivations and guiding them to drive their business forward. Entrepreneurial characteristics are a mix of personal, social, and environmental factors that influence a business ecosystem. These traits play a key role in shaping a company’s goals and strategies, ultimately affecting its performance.

According to a recent study, over 94% of new businesses fail during first year of operation. Lack of funding turns to be one of the common reasons. Money is the bloodline of any business. The long painstaking yet exciting journey from the idea generation to revenue generating business needs a fuel named capital. That’s why, at almost every stage of the business, entrepreneurs find themselves asking – How do I finance my startup?

Now, when an entrepreneur require funding depends largely on the nature and type of the business. Here is a comprehensive list of funding options for startups that will help the entrepreneur to raise capital for business.

Introduction

Entrepreneurship, known for its ability to drive innovation, economic development, and societal change, is a dynamic force that plays a crucial role in global advancement. However, the path of an entrepreneur is not a straightforward journey from concept to achievement. Instead, it is a complex process influenced by numerous factors, which together form the entrepreneurship development cycle. Gaining a deep understanding of this cycle, along with the entrepreneurial environment and the challenges entrepreneurs face, is essential for cultivating a thriving entrepreneurial ecosystem.

The entrepreneurship development cycle refers to the various stages that entrepreneurs go through as they turn ideas into successful ventures. The cycle starts with ideation, where entrepreneurs identify opportunities and develop innovative solutions to address unmet market needs or problems. This is followed by a feasibility assessment, during which entrepreneurs assess the potential of their ideas, considering market demand, competition, and the resources needed. After confirming the viability of their concepts, entrepreneurs move on to resource acquisition, gathering the capital, talent, and infrastructure necessary to bring their ideas to life. The subsequent phases include launching the venture, establishing a market presence, and pursuing growth through strategic decision-making and adaptability to shifting market conditions.

Introduction

Entrepreneurship is crucial for economic development, especially during crises when job losses push people to find alternative livelihoods, often turning to entrepreneurship as a means of survival. Its impact is highly beneficial, promoting growth, wealth creation, and better living standards. In developing countries like India, entrepreneurship offers a path to holistic development, particularly for disadvantaged groups traditionally dependent on agriculture. Uplaonkar and Biradar (2015) noted that entrepreneurship development effectively generates employment, increases income, reduces poverty, improves health, and ensures food and nutritional security. Recognizing the importance of entrepreneurship, stakeholders in the agricultural sector now see its positive impact on business sustainability. Verhees et al. (2011) argued that promoting entrepreneurship in agriculture can significantly reduce poverty and boost rural prosperity, directly addressing socio-economic challenges in rural areas (Bhooshan and Ranjith, 2022). Therefore, supporting the entrepreneurial ecosystem in rural sectors through programs and schemes is essential.

The total milk production in the country for the year 2013-14 has been estimated at 126 million metric tonnes and the demand is expected to be 180 million tonnes by 2020. To achieve this demand annual growth rate in milk production has to be increased from the present 2.5 % to 5%. Thus, there is a tremendous scope/potential for increasing the milk production through profitable dairy farming.

a. Requirements of project report for setting up dairy units

Project report can be prepared by a beneficiary after consulting local technical persons of State Animal Husbandry Department, DRDA, Dairy Co-operative Society / Union / Federation / commercial dairy farmers.