eChapters

Abstract

Drying is a widely used method of food preservation. It leads to some structural changes in the dried material resulting in poor quality and rehydration. Freeze drying, though a costly process, reduces water activity without exposing the food material to high temperatures, eventually retains the original quality to a great deal. Moisture in the foods is frozen to ice which is sublimated under low pressure. Low pressure helps to vaporise the ice without transforming it to liquid, hence leaving the food structure porous in nature. The food is claimed to preserve the nutritional, sensory and re-constitutional qualities.

1.1 INTRODUCTION

Most food materials are composed of a very high percentage of water, which can be as high as 95%, and this makes them susceptible to microbial activity. Microbial activity spoils the products, leaving them useless for human consumption. It not only changes their taste and color but it may also develop toxins, thus making them unsafe. There are various methods for preserving food but in order to make them shelf stable, removing water from foods helps keep them from spoiling for a longer period of time.

Freezing is one of the most critical stages in ice cream manufacture because it creates the frozen structure while simultaneously incorporating air. This chapter explains the principles of dynamic freezing and the structural changes that occur as the mix is transformed into semi-frozen ice cream. It discusses ice-crystal formation, air incorporation, overrun, draw temperature, fat destabilization, and product condition at freezer draw. Different freezer systems and hardening requirements are examined, along with calculations related to output and overrun. The chapter also introduces ingredient feeders and ripple or ribbon systems. Understanding freezing technology is essential for controlling texture, body, meltdown, yield, and overall product quality.

Abstract

Fruit leather is a concentrated source of nutrient, energy and minerals processed from fruits in the form of sheet or leather. It is eaten as a desert or snack since ancient time. Fruit leathers have a greater benefit than fresh fruits if equilibrium ingredients are established and seasonal surplus of fruits are utilized and contributed to minimize post-harvest losses. The process of making fruit leathers involve making fruit puree and adding additives and preservatives for the purpose of enhancing taste and shelf-life. Drying, the key unit operation in making fruit leathers, is the most energy intensive and time consuming step in the process, modern drying techniques can be implemented to overcome the limitations. By novel means of processing technologies or enrichment could lead fruit leather to introduce high quality food product in the market. Continuous research and development can lead to a new era of production and development of fruit processing and overcome the obstacles during processing. In addition study on chemical and biochemical hazards involved in overall process will guide to ensure product safety. Market research tools e.g. quality function deployment method and other market analysis methods could be applied to understand the product trend, demand, consumer expectations and the scopes of improvement.

Importance of Fruits and Vegetables in Human Life

Fruit is the edible, and more or less juicy, product of a tree or plant and consist of the matured ovary including its seeds and adjacent parts. Usually fruits are sweet, with a wide range of flavours, colours and textures.

Composition

Fruits are very poor source of protein and fat. Avocado is the exception containing 28% fat. Fruits contain high amount of moisture hence they are highly perishable. They are also good source of fiber. Fruits are not very good sources of calories. Fruits like bananas give fairly good amount of calories. Ripe fruit contains a higher percentage of sugar than unripe fruit does and the sugar is chief in the form of sucrose, fructose and glucose. Generally fruits are poor source of iron, Mangoes are excellent source of carotenes. Oranges are fairly good source of beta carotene. Guavas are the best source of vitamin C. Citrus fruits are good source of vitamin C. Cashew fruits are inexpensive and rich in vitamin C, although there is variation of vitamin content from fruit to fruit most fruits in the raw state contain some ascorbic acid. If fruits are bruised, peeled, cooked or exposed to air, large amounts of the vitamin may be oxidized. Apples are not only expensive; they contribute little to the nutritive value. They give fiber to the diet.

    1.    Asepsis is a process of 
        a)    Removal of microorganisms    
        b)    Keeping out microorganisms
        c)    Hindering the growth & activity of microorganisms    
        d)    Killing the microorganisms
    2.    Self-decomposition of the food is prevented by
        a)    Inactivation of enzymes    b)    Delay of chemical reactions
        c)    a & b    d)    None
    3.    Commercially available fruit beverages are generally pasteurized at 
        a)    85°C for 25 to  30 min    b)    62.5°C for 25 to  30 min
        c)    71.1°C for 15 to  30 sec    d)    92.1°C for 15 to  30 min

Labelling is a critical component of food regulation, consumer communication, traceability, and brand credibility. This chapter examines the regulatory requirements governing ice cream and frozen dessert labelling in India, with emphasis on FSSAI standards and declarations. It explains the distinction between product standards and label declarations and introduces systems for managing recipe masters, nutrition information, label copy, artwork, and packaging approvals. Mandatory declarations, ingredient information, allergen declarations, nutritional information, claims, and common labelling errors are considered. The chapter also identifies departmental responsibilities and best practices for label compliance. Proper regulatory control ensures accurate consumer information, reduces legal risk, and supports consistent packaging and commercial operations.

Introduction

In terms of individual health and physical condition, the situation in modern society is rather giving rise to concern. The last decades have seen a tremendous increase in availability and variety of food products which has undoubtedly affected the food habits of the average individual. Despite the fact that food has become overall safer and increased accessibility allows for healthier diets, worrying we are nevertheless faced nowadays with diet- related diseases of proper epidemic proportions. We now encounter an epidemic of obesity that spreads not only to the majority of the adult population but also, more worryingly, to young people who have rarely the option of alternative diets. Moreover, as scientific proofs for the link between diet and disease (particularly cardiovascular diseases and some cancers) accumulate, action is urgently needed. There are an increasing number of calls for action. It is within this situation that functional foods have developed. They assume a highly targeted solution to the diet related diseases with effective reduction of risk and improved physical and mental well being. That represents a big step from the traditional food-for-nutrition but the scientific milieu is ready to take the chances. The emerging ‘functional food science’ is focusing research on the effects of functional foods on growth, development, metabolism, the cardiovascular system, intestinal physiology, and even on behavioural and psychological functions (FAIR, 2000, Vol. 1). In view of these facts, it should appear necessary to assess and evaluate the developments in food production in terms of their effect on the individual consumer and the society at large.

Introduction

One of the main properties of fermented foods whether alkaline or acidic is the presence and activity of beneficial organisms which themselves make these foods functional. These functional micro organisms have varied roles like conversion of the native constituents of raw materials to forms in which they are more bioavailable, formation of taste, colour and flavouring compounds thereby imparting pleasantness to foods, removal of anti-nutritive factors in food by converting them into much less harmful compounds or degrade certain native toxic elements present in food, formation of biopreservatives which will extend the shelf life of foods and provide microbial security, as pathogens and spoilage microorganisms fail to readily grow in such hostile conditions. These functional microorganisms also produce in foods certain health-promoting bioactive compounds like enzymes, vitamins, minerals or increase the digestibility which may not have been in the original food or raw material before fermentation. In other words they improve the nutrition profile of the foods or naturally fortify foods. Some of these beneficial effects may also lead to the formation of certain compounds which show antioxidant properties in foods. These very roles played by these functional micro-organisms form criteria in their selection for use in food fermentations when they are intentionally added to foods both to initiate and accomplish desired fermentations.

Abstract
 
Spray drying is used as one of the best alternatives for extracting essential constituents of fruit and vegetables. Spray drying of fruits and vegetable juice/purees, which is an excellent source of bio-functional properties into a solid phase helps to enhance their stability and controlled release in different food matrices. Spray drying along with different carrying agents helps to retain essential active compounds in fruits and vegetables. Spray drying is generally carried in three steps viz. atomization of liquid feed by suitable atomizer; drying of droplets with the help of hot air and motion of droplets. Carrier agents like maltodextrin, wax starch, Gum Arabic and microcrystalline cellulose are added to the feed to increase glass transition temperature. Chapter presents the effects of different operating parameters of spray drying as well as effects of carrier agents on the physicochemical and functional properties of spray dried fruit and vegetables powders.

Abstract

Wheat gluten consists mainly of gliadin and glutenin polypeptides. During mixing gliadin and glutenin proteins interact to form a unique viscoelastic gluten network, which is envisaged as being necessary for holding the gases and for producing a light porous crumb textured bread. Recent work has confirmed that the elastic properties of gluten are due to the glutenin fraction, whilst the viscous properties are attributed to the gliadin fraction. Equal amount of these two major protein components of wheat gluten is required for achieving the desired bread quality, but variation in the composition and physical properties of the glutenin polypeptides appear to be largely responsible for the differences in the gluten viscoelasticity and breadmaking potential among wheat cultivars. Recently, associations of gliadin polypeptides with breadmaking quality have also been reported. Using improved protein separation and purification techniques, physical methods and genetic engineering, we are beginning to understand the structure-functional relationship of wheat gluten proteins, but much remains to be explored in the years to come. 

The functioning of the Women Dairy Cooperative Societies depends upon the variations in managerial capacity leading to profit and loss of different WDCS. To make an in-depth analysis, the study was undertaken in undivided Cuttack and Dhenkanal district of Odisha covering 22 randomized WDCS with a sample of 110 women respondents.

The analysis of the findings after statistical treatment have been presented objective-wise as follows;

Socio-economic profile of the members of WDCS involved in dairy production activities.

Gap between procedures prescribed and followed in formation and functioning of WDCS.

Identification and analysis of key performance areas in the WDCS.

Determination of management practices and milk production profiles of WDCS members.

Extent of participation of women members in dairy activities.

Entrepreneurial characteristics of members of Women Dairy Cooperative Society.

Impact of WDCS on socio-economic status of the members.

Correlating variables and their interrelationship in predicting smooth functioning of WDCS.

Constraints faced by the WDCS members.

Suggestions of members for improvement in functioning of WDCS

Abstract
 
Food products can have moisture content as high as 90% which needs to be lowered to acceptable limits to prevent microbial growth and deteriorative reactions. Drying is one of the most common and cost effective techniques for removal of excess moisture from the food by application of heat. In addition to its role of extending the product shelf life and providing stability, drying also helps to produce variety of products from agricultural, horticultural and industrial products. But to obtain the desired quality product, adequate drying is essential which depends on type of dryer and drying technique employed which further requires proper understanding of drying process. Despite being important unit operation in food processing industry, appropriate scientific knowledge of the drying process is still limited. So, the fundamental principles and associated terminologies with drying has been discussed in detail in this chapter to have thorough understanding of the drying process. In addition, different models and calculation procedures for drying of different types of commodities has also been reviewed.

The term probiotic means “for life” and it is currently used to refer bacteria that are associated with beneficial effects for humans and animals. The credit for first observation made on the positive role of some selected bacteria was attributed to Eli Metchnikoff, the Russian born Nobel Prize recipient, worked at the Pasteur Institute in the beginning of the last century. Metchnikoff suggested that - “the dependence of the intestinal microbes on the food makes it possible to adopt measures to modify the microflora in our bodies and to replace the harmful microbes by useful microbes”. Interim Henry Tissier, a French paediatrician, observed that children with diarrhea in their stools had a low number of bacteria which are characterized by a peculiar Y shaped morphology. On the contrary, these “bifid” bacteria were abundant in healthy children. Based on these observations, Tissier suggested that “bifid” bacteria could be administered to patients with diarrhoea to help restore a healthy gut microflora. These two scientists were the first to give scientific intimation for the use of probiotics when even the term probiotics was not coined. Later in 1965, the term probiotics is coined by Lilly and Stillwell to describe substances produced by one microorganism, that stimulate the growth of another. Subsequently, Parker defined probiotics as organisms and substances that contribute to intestinal balance. Further, Fuller (1989) improved the Parker’s definition of probiotics as “live microbial feed supplements which beneficially affect the host animal by improving its intestinal microbial balance”. Havenaar and Huis in’t Veld (1992) extended the probiotic definition with the description: “A viable mono or mixed culture of microorganisms which, applied to animal or man, beneficially affects the host by improving the properties of the indigenous microflora”. At the end of the millennium, Salminen and his coworkers (1999) proposed the following definition: “probiotics are microbial cell preparations or components of microbial cells that have a beneficial effect on the health & well- being of host”. Whereas FAO/WHO (2001) defined probiotics as “living bacteria that, when administered in adequate amounts, confer a health benefit on the host”. This definition for probiotics is widely accepted.

Introduction

Fermented foods and beverages comprise an indispensable part of the human diet. They can be generally defined as those foods and beverages produced via controlled microbial growth and conversion of various substrates using either enzymes or as whole cell itself, as shown in Figure 1.

In spite of the problems with dosage and viability of probiotic strains, a lot more work is required for industry standardization and safety issues. However, it is noted that probiotics have considerable potential against many pathogenic and other diseases. A wide range of clinical trials are still needed to standardize and optimize the conditions. Ongoing basic research will continue to identify and characterize existing strains of probiotics, identifying strain-specific outcomes, determine optimal doses needed for certain results and assess their stability through processing and digestion.

With recent work it has become clear that bacterial societies are very complex. Gene expression in bacterial communities are heterogenous. The heterogeneous gene expression contributes towards the biofilms in fluctuating environments which needs to be understood.Technique like single-cell analysis can help in the investigation of more complex communities. Recently, Jahid and Ha, (2012) have written a review on microbial biofilms of produce and the future challenges to food safety many outbreaks have been observed involving food- borne pathogens. Therefore, there is an urdent need for the safety of foods especially against microbial attacks and biofilm formation as they cause a risk to public health. Medically, the pathogenic microorganisms form biofilm- associated with the epithelial or endothelial lining which are embedded in the lungs, intestinal or vaginal mucus layer, the teeth or other medical implant surfaces or formed intracellularly (Dewasthale et al., 2018). Teichoic acids are characteristic major components of the cell surface in Gram-positive bacteria.

The Indian economy, which meets its own dairy demands, has reached a turning point with its bovine breeding initiatives. The viability of this enterprise, however, depends largely on completing as many successful artificial insemination cycles at a cattle farm. Estrus behaviour observation is used to determine when artificial insemination should take place. But since not all cattle exhibit substantial estrus symptoms, insemination results are not always reliable. An estrus detecting instrument known as an Electronic Nose (eNose) is created to address these issues.

Introduction

The world does not function without mathematics. In our day-today life we come across many problems which are solved mathematically. The mathematical logical system follows “Yes” or “No”, “True” or “False”, “1” or “0” which are precise outputs for the precise inputs. There are several ambiguous or vague problems which cannot be given with accurate precise value with the conventional logical operators. Beyond this Boolean logic operator the logical system which mimics the human brain and gives precise solutions for the imprecise linguistic variables is the Fuzzy logic system. Fuzzy logic is a novel approach that intends to imitate human reasoning using calculations and operations with fuzzy systems and linguistic variables. The problems with vague imprecise data which we come across in our day today life cannot be solved by conventional binary logical method. The fuzzy logic solution spontaneously splits a complex problem into its component parts. This reduces the solution to its component parts. Compilers may re-assemble the code for effective execution on some target, but at the programmer level the problem is a number of simple tasks.

Fuzzy sets theory was introduced by Zadehin the year 1965, and it allows uncertain phenomena to be treated mathematically.

1.1. Introduction

The significance of milk as the most wholesome single food available in nature has never been debated. It is as ancient as mankind itself, as it is the substance created to feed the mammalian infant. All species of mammals, from the lowly rat to the mighty whale, produce milk for this purpose. Several centuries ago, perhaps as early as 6000-8000 BC, ancient man learned to domesticate species of animals for obtaining their milk for consumption. These included cows, buffalos, sheep, goats and camels, all of which are still used in various parts of the world for the production of milk for human use (Fig. 1.1 & 1.2).

Dairy farmers are faced with a number of fundamental inquiries. The first inquires as to what dairy animal he needs to keep. Is the breed with the best production performance the one that has adapted to the local environment the most? What animal is the best, asks the second? Is it the one with a showwinning conformation or the one with a strong ancestry? Is the ideal dairy cow one that produces the most milk, has the best feet, legs, and udder support, or combines the performance of these characteristics in the best possible way?

Diversity of gut microbial community

The human microbiota (the collection of microbes that live on and inside us) consists of about 100 trillion microbial cells that outnumber our ‘‘human’’ cells 10 to 1, and that provide a wide range of metabolic functions that we lack. It has been estimated that they encode 100-fold more unique genes than our own genome. Furthermore, the gut microbes contribute to energy harvest from food, and changes of gut microbiome may be associated with bowel diseases or obesity. To understand and exploit the impact of the gut microbes on human health and well-being it is necessary to decipher the content, diversity and functioning of the microbial gut community. If we consider ourselves as superior organisms encompassing these microbial symbionts, by far the majority of genes in the system are microbial. In this sense, completing the human genome also requires the characterization of the microbiome (the collection of genes in the microbiota).

Methods of counting viable and non-viable bacteria in gut

Before the advent of genome sequencing and genome-wide analysis method, our knowledge of molecular characteristics of diverse gut microbial population was extremely limited. To obtain an estimate of cultivability, microbial ecologists generally compare microscopic counts with total viable counts. The total viable count made on a nonselective agar based medium estimates the number of colony forming units (cfu) per gram of sample. The finding that total viable counts are typically lower than total microscopic counts was thought to be due to the number of dead cells. Indeed, dead bacteria in feces may constitute up to one third of the total bacterial community. However, recent nucleic acid based studies indicated that a majority of bacteria in a variety of ecosystems are different from those described in culture.

Introduction
Ghee is the pure clarified butter fat prepared chiefly from cream and/or desi butter (Makhan) to which no colouring matter is added.  Ghee manufacture has great significance and relevance to Indian masses and the dairy industry. Ghee is a very popular product since ancient time and has greater demand during festival and other ceremonial functions where use of ghee in food has been considered to delicacy due to its pleasing flavour and aroma. There are sufficient recorded evidence to prove that the manufacture of ghee originated from India and has been used extensively for religious and dietary purposes since Vedic times. Presently about 28% of total milk production is utilized for manufacture of about 1 million tones of ghee per annum. It is the traditional product with an established market. Cow ghee is golden yellow in colour, and is attributed unique therapeutic value.  The colour of buffalo ghee is greenish yellow due to presence of pigments called billirubin and billiverdin. Ghee is characterized by its pleasant, cooked and rich flavour. The preferred texture is of larger uniform size from grains having non-greasy consistency.

Introduction

Globalization, as defined by the International Monetary Fund (IMF), refers to the increasing economic interdependence among nations, characterized by rising volumes and diversity of cross-border transactions in goods and services, international capital flows, and the more rapid dissemination of technology worldwide.

Key Characteristics of Globalization

1. Expansion opportunities for businesses globally.

2. Elimination of distinctions between domestic and international markets.

3. Freedom to buy and sell products and services across any country.

4. Production and distribution facilities are established based on economic feasibility at optimal locations worldwide, rather than national priorities.

5. Product planning and development are influenced by global market conditions.

6. Sourcing raw materials from across the globe to maximize efficiency.

7. Global strategies, organizational structures, cultures, and management practices.

8. Viewing the world as a unified market.

Plants, with the help of photosynthesis, convert simple molecules (like carbon dioxide and water) into more complex molecules (anabolism) through various chemical reactions. Animals synthesize more complex molecules (anabolism) from monomer units through multiple chemical reactions. Anabolism refers to a biosynthesis process involving the sequences of biochemical reactions by which complex molecules are formed in living cells from available monomer units. Anabolic processes include the biosynthesis of complex biomolecules like carbohydrates, proteins, and lipids. The anabolic processes require energy from high-energy bond compounds like ATP.
The anabolic processes related to the biosynthesis of carbohydrates include
(1) Gluconeogenesis and
(2) Glycogenesis
11.1 Gluconeogenesis
Gluconeogenesis is the synthesis of new glucose molecules from noncarbohydrate molecules. The non-carbohydrate molecules that are used for gluconeogenesis are derived from glycolysis, lipolysis, and proteolysis. Examples are pyruvate, lactate, glycerol, and glucogenic amino acids. The liver and kidneys are the preferred organs for the gluconeogenesis process. It also occurs to some extent in the brain. Blood glucose levels are maintained at physiological concentrations through the process of gluconeogenesis in humans and ruminants. The blood glucose drops below normal levels during various conditions like fasting, starvation, pregnancy, lactation, fever, and low carbohydrate diets.

A glucose syrup is defined as ‘A purified and concentrated aqueous solution of nutritive saccharides derived from starch’, and having the following characteristics:

1. Dry matter of not less than 70%.
2. A dextrose equivalent (DE), expressed as d-glucose, of not less than 20% based on dry matter.
3. A sulphated ash content of not more than 1% on a dry basis.

Starch has a DE value of zero, whilst dextrose, the final end product of starch hydrolysis, has a DE value of 100. For the lay person, the term dextrose equivalent or DE can be regarded as an indication of how far the conversion process from starch to dextrose has gone. While technically DE is a measure of the total reducing sugars present in a glucose syrup.

Introduction

Wheat is the most important cereal crop to the human kind. It is the main source of energy and nutrition in human diet. Wheat is consumed in the form of large number of end products as chapati, bread, biscuit, cakes, pretzels, noodles and pasta products. Millions of people are involved in milling, baking and pasta products industry with huge turnover per annum. However, each end-use product of wheat has it’s own specific requirement for example basically hard wheats along with strong gluten and high protein content are used for bead making. Soft wheat with weak gluten and low protein content are required for biscuit making Souza et al. (1994). Durum (tetraploid) wheat is used for pasta products as macaroni, vermicelli and spheghatti and Dicoccum for therapeautic purposes. Often chemical improvers are used to improve the dough properties for these products. Most of these chemicals have been banned because of their toxic effects. Therefore, only alternative is to develop varieties suited to meet the requirements of these end-use products. This needs better understanding of molecular basis of grain quality to accelerate breeding for producing wheat varieties for each end-use product separately. Storage proteins are the major component of grain which determines end-product quality. In this chapter detailed structure, genetics and functionality of gluten proteins are described.

Glycogenesis helps to maintain blood glucose, as it is a primary source of energy for every cell. An inadequate supply of glucose to the body may lead to the failure of the vital organs. Glucose, when in excess, is synthesized into glycogen and stored (glycogenesis), mainly in the liver and muscles (including the uterus). It is also found in other tissues, such as the kidney, brain, heart, and adipose tissues. The stored liver glycogen is broken down (glycogenolysis) into blood glucose when needed. Still, the glycogen stored in muscle is broken down to glucose 1-phosphate and converted to blood glucose later. Either the synthesis or breakdown pathway is primarily active at a time in tissues. Glycogen synthesis and its breakdown are not reversible processes.
The percentage of glycogen stored in skeletal muscles is less ( 1% to 2%) than in the liver (10%). Still, the total quantity of glycogen is greater in muscles due to their greater mass than an animal’s total liver mass. Muscle mass, on average, ranges from 40 to 45 % of body weight for the most mature mammals.
Glycogen synthesis (glycogenesis) is an anabolic process forming a branched homopolysaccharide made of several chains of alpha D-glucose units linked by α-1,4 glycosidic bonds in a linear chain and nearly every ten glucose residues; the chain branches off via α-1,6 glycosidic linkages. The α-glycosidic bonds give rise to a helical polymer structure. The number of glucose units in a single glycogen molecule varies (1,700 to -600,000 units). The glycogen granules are formed on the glycogenin protein in the center, so it acts as a primer, and their number determines the total number of glycogen particles.

Glycogen breakdown is known as glycogenolysis. This breakdown occurs in the cytoplasm of cells of the organs, wherein glycogen is stored. The end product of glycolysis is glucose in the liver, which is glucose-1-phosphate in skeletal muscles.
Glycogen is a polysaccharide synthesized from glucose monomers. Glycogen is stored in the cell instead of glucose because glucose requires more water, whereas glycogen can be stored with much less water. Most of the stored glycogen is in the liver (5% of body weight) and muscle (1 to 2 % of body weight). Muscle and liver glycogen undergo glycolysis for different purposes. Muscle glycogen provides energy for muscular activity, whereas liver glycogen helps to maintain the blood glucose level.
Glycogen contains many glucose residues (up to 120,000) linked by alpha 1-4 glycosidic bonds, forming a straight chain. Glycogen has branches at alpha 1-6 glycosidic bonds at every ten glucose residues. At the reducing end, the carbon one of glucose is free, whereas it is not accessible in the case of non-reducing ends.

Glycolysis involves a series of reactions to extract energy from glucose to
release two molecules with three carbons called pyruvate. The process is not
dependent on oxygen but can occur under aerobic and anaerobic conditions,
releasing different end products. Under aerobic conditions, the pyruvate formed
is then oxidized in the mitochondria to CO2 and H2O. The energy released in
glycolysis is in the form of ATP (High Energy Bond). All the reaction steps
occur in the cytoplasm, as it is the extramitochondrial pathway. In anaerobic
conditions and the absence of mitochondria (RBC), the end product of
glycolysis is lactic acid.
The net reaction of Glycolysis (anaerobic) may be summarized as under
Glucose + 2ADP + 2Pi → 2 Lactate + 2ATP
7.1 Steps in EMP Cycle or Glycolytic Pathway
Table 7.1: Steps and enzymes of glycolysis or EMP cycle.

Introduction

Meat derived from animals are subjected to various contaminations from number of sources. The animal itself is a major contributor of both pathogenic and spoilage organisms. Further contamination may be introduced from water used, equipment used for product preparation, from the meat handlers and the surrounding environment. Microbiological problems such as food poisoning or spoilage may arise when the desired effect is not achieved and is usually due to errors in the handling or processing procedures. The detection and rapid correction of such errors and their future prevention is a major objective of any quality control system.

In traditional approach to meat and meat product quality control system, only the samples of the final product were analyzed by laboratory test to check for compliance with specifications. However, the responsibility for control of hazards rests with individuals involved in all stages from farm to ultimate consumer. And the control of hazards at each stages of food chain may be achieved by Hazard Analysis Critical control point (HACCP). Hazard analysis critical control point is an internationally recognized system that helps to ensure the manufacture of safe food products. HACCP is not a zero risk system but rather a system designated to minimize the risk of food safety hazards. HACCP concept is a systematic and rational approach Firstly by consideration of the hazards i.e., microorganisms or their toxins, that need to be controlled in a specific operation by structured hazard analysis and secondly on the identification of the most effective means of controlling the identified hazards. This system, by focusing attention on the factor that directly affects the microbiological safety and quality of meat foods, eliminates wasteful use of resources and superfluous consideration. As a consequence, the cost/benefit relationships are more favorable. The system is applicable at all levels of meat food chain from farm production through processing, transporting, merchandising and ultimate use in the meat food service establishment or at home. Ensuring food safety and quality is the responsibility of all links in the food chain. Now a day’s food consumers are very much health conscious and they want their food to be safe and of good quality. As meat being highly perishable and high risk food product, it is very much imperative on the part of meat and meat products producers and exporters to produce safe and quality meat to stand in the competitive world and further hygienic meat processing is important not only to provide safe and wholesome meat but to provide a good public image and to increase consumer demand.

Abstract

From the vedic time itself goat is popularly known as a poor man’s cow in India. It has the proven potential to make significant contribution to the poor man’s economy thus livelihood with minimal requirement of care. It can be easily managed by women and children in spare time as it is small-sized animal. Other maintenance requirement like feeding, milking and care of goats do not require much equipment and hard work. Capital investment and feeding costs are also quite low. It not only supplies nutritious and easily digestible milk but goat meat has high demand and price in the market thus can act as regular source of additional income for poor and landless or marginal farmers. Also the role of women in goat keeping is very significant in the poor rural families and goat is the most important means through which rural women are able to contribute meaningfully to the cash needs for their family members. Thus, goat rearing can play very important role in balanced socio-economic development of the country as there is a close relationship between the status of women and the socioeconomic development of any country (Alam, 2001 and Ahmed, 2017).

Abstract

Goat farming was the important part from the economy point of the view; especially in the Mediterranean and Middle East region where goat is also called as “Cow of poor man”. Goat milk have unique compositional characteristics like, lower ethanol stability, higher content of short- and medium-chain fatty acids. It is a rich source of calcium, phosphorous, chlorine, and vitamins. It is highly digestible and has a mild laxative effect. Along with these, who are suffering from anemia, osteoporosis and malabsorption, they should consume Goat milk. Goat milk is a functional and nutraceutical property as it both nutritional and additional health benefit such as easily digestible, boost immunity and metabolism, anti-inflammatory and anti-carcinogenic to consumer this lead to increasing demand for goat milk and derived dairy products. Goat milk can be used to manufacture a wide variety of products, including fluid, fermented, frozen, acid coagulated, and dehydrated milk products.

The aim of this chapter is to highlight the physical and chemical properties, nutritional and health benefit of Goat milk. Goat milk based some popular products are also discussed in order to provide some basic information regarding the value addition of Goat milk.

During the latter part of the 20^th century, rapid economic development in most countries coupled with population growth propelled the inevitable demand for more food and manufactured goods. However, requirement of more food is placing unprecedented demands on agriculture and natural resources. Humans have made agriculture the dominant environmental threat by clearing forests, cultivating marginal lands, and intensifying farming in sensitive landscapes and watersheds. Most of the land use systems in the tropics are characterized by a rapid decline in productivity and high rates of soil and environmental degradation which need to be addressed in a proper way.

Agriculture has changed radically since the end of World War II. Productivity of most crops has scaled to new levels because of the adoption of new technologies, machines, increased chemical inputs, and government policies. However, continuing agricultural production without harming the environment is a challenge, which must be tackled along with economic growth. Some of the environmental issues related to agriculture are top soil loss, groundwater contamination, air pollution, greenhouse gas emission, decline of family farms neglect of the working conditions of farm labourers, new threats to human health and safety by the spread of new pathogens, economic concentration in food and agricultural industries, and disintegration of rural communities (Brodt et al, 2011). This situation prompted world nations, political leaders, scientists and planners to pay more attention to the concept of sustainable development. As a concept, sustainability is concerned with the continuity of environmental economic, and social aspects of human society.

Introduction

Government initiatives aimed at supporting small-scale enterprises and fostering women’s entrepreneurship are crucial for driving economic development, job creation, and social empowerment. Small-scale enterprises, including micro, small, and medium enterprises (MSMEs), play a vital role in the economy by contributing to employment, innovation, and poverty reduction. Similarly, women entrepreneurship offers significant potential for promoting inclusive growth, tapping into underutilized talent, and advancing gender equality in business leadership.

Small-scale enterprises often face challenges like limited access to funding, poor infrastructure, regulatory barriers, and market limitations. Women entrepreneurs, on the other hand, encounter additional obstacles such as socio cultural norms, limited access to resources, and gender biases in the business world. To address these issues, governments globally have introduced policies and initiatives aimed at supporting small enterprises and encouraging women’s participation in entrepreneurship.

Introduction

Small and medium-sized industrial units, or small scale industrial (SSI) units, are generally referred to as SMEs, according to the Ministry of Micro, Small and Medium Enterprises. The MSMED Act of 2006, which was updated in 2020, serves as the foundation for the definition of SMEs in India.

• Micro manufacturing and services units: Up to Rs. 1 crore in investments and up to Rs. 5 crore in revenue.

• Small manufacturing and services units: Up to Rs. 10 crore in investments and up to Rs. 50 crore in revenue.

• Medium manufacturing and services units: Up to Rs. 50 crore in investments and up to Rs. 250 crore in revenue.

Small and Medium-sized enterprises (SMEs) constitute the backbone of the global economy. SMEs not only provide major contributions to national GDPs, but they also play an important role in job creation, innovation, and regional development. In India, SMEs account for about 30% of the country’s GDP and employ over 110 million people, making them an important part of the economic structure.(FICCI,2023).

Introduction

Fruit and vegetable development starts with formation of an edible part fruit setting, seedling emergence, tuber development and ends with loss of edible character, or spoilage through physiological deterioration, development of fibrous character or spoilage through microbiological intervention . The state of maturity of a fresh horticultural commodity is therefore is a continuum process along the development scale. The term mature implies that point in the development scale when the horticultural commodity in the state that is ready to use (consume, process, store). For the packing house, maturity means suitability for storage followed by sufficient shelf life to assure profitable supply to markets. On the other hand, the retail consumer may value colour, flavour, or textural attributes. This implies that maturity and an appropriate compromise must be achieved through the marketing process.

Quality, on the other hand, relates to the degree of the satisfaction that the consumer or customer is likely to obtain through the use of mature commodity. Maturity and quality are interrelated with market expectations or requirements. These expectations or requirements are expressed through regulations or guidelines of grower groups or through legislative authority expressed as quality standards or grades and enforced through inspection agencies associated with government departments.

Abstract

Grains in present context are food grains. The PFA Act includes cereals, millets, and pulses in food grains. At times, seeds of certain oilseeds like soybean are also referred to in the discussion of food grains. Grains have been cultivated for thousands of years. We have Grain Standards as established by the International Organization for Standardization (ISO), which are considered as International Standards. Another source is Codex Alimentarius Commission (Codex) under the aegis of FAO (UN), which operates a Committee to formulate standards that are referred to as Codex Standards. Many countries have a National Standards Institution, which develops National Standards for their main grain crops and other commodities and issues specifications along with methods of testing and analysis. Several countries, which are in developing status, adopt or modify international standards into their national system. The Grain Standards have been evolved and established for a variety of purposes but primarily to grade produce in agricultural marketing largely to facilitate the movement of grain, provide both sellers and buyers with guidelines to support financial transactions, and ensure that the produce will meet up with end-use requirements, or, increasingly to protect the consumers.

Abstract
 
Grains are usually harvested above 20% (wb) moisture level and they are prone to microbial attack at high moisture level. In order to avoid both qualitative and quantitative losses that arise from microbial growth, grains are usually dried to safe moisture level. The safe storage moisture content may vary from 8-16% (wb), depending upon the grain and climate type. Therefore, drying is a necessary step in preventing these losses. Drying also reduces the bulk weight of the materials, thus easing transportation and storage. Drying can occur in thin layer or in deep bed. Different drying theories are proposed to characterize these drying processes. Theoretical as well empirical drying equations have been developed.

15.1 Fondant

The word fondant is said to come from the French verb fondre to dissolve. Confectionery fondants are normally made by boiling a sugar and glucose syrup in order to concentrate it before the mixture is cooled with beating to produce fine sucrose crystals. Some fondants used in baking are made by mixing icing sugar with a sucrose and glucose mixture. The icing sugar has a small particle size because it has been milled whereas the sucrose in a crystallised fondant has small crystals. It is possible to make a fondant using dextrose instead of sucrose. Crystalline dextrose has a positive heat of solution, i.e. heat is absorbed, and this produces a marked cooling effect which goes well with a peppermint flavour, but one which is not particularly attractive economically, but they can be in some other countries.

The term growth as applied to higher organisms such as animals commonly is concerned with increase in protoplasmic mass and does apply to reproduction or to increase in number. In microbiology the term refers to increase in the number of organisms. Bacteria increase in number by a process of simple binary fission. Each cell increase in size and redivide into two similar cells. Each of the divide cells may in turn divide to become two cells. Each division produces what is termed as new generation of cells, theoretically there are 2,4,8,16,32,64,128,256 cells in the 2,3,4,5,6,7,8,& 9th generation, this is known as logarithmic growth – the population doubles with each successive generation. Under favourable conditions, bacteria produce generation within 15min. Under unfavourable conditions 24 hours of more may be needed for each generation. Generation time for E.coli is 17 to 20 minutes.

Introduction

The International Organization for Standardization (ISO) is a global federation of national standards bodies. Its primary goal is to promote the development of standardization and related activities worldwide, thereby facilitating the international exchange of goods and services. Additionally, ISO focuses on fostering cooperation in intellectual, scientific, technological, and economic fields. The outcomes of ISO’s technical work are published as International Standards.

ISO 9000 The

ISO 9000 family of standards represents an international consensus on good management practices, aiming to ensure that organizations consistently deliver products or services that meet clients’ quality requirements. These practices are condensed into standardized requirements for a quality management system, applicable regardless of the organization’s nature, size, or whether it operates in the private or public sector. The ISO 9000 standards family includes:

Introduction

Over centuries, spices have been used as an important addendum for colour, flavour and preservation of foods. In addition, their medicinal and cosmetic utilities have been widely recognized (Purseglove et al., 1981; Srinivasan, 2005). All these benefits made them extremely desirable with an ever growing demand in the international market. India holds the title of the largest producer and exporter of spices with major share for pepper, capsicum, turmeric, ginger cardamom, seed spices, curry powders, spice oils and oleoresins. The other primary producers of spices includes China, Indonesia, Malaysia, Egypt, Turkey Brazil and Mexico while USA, Europe, Japan, East Asian and Middle East countries are their major importers.

Spices are made from diverse plant parts viz. rhizomes, barks, leaves, fruits and seeds and hence its processing methods vary depending on the raw material. However, the basic unit operations namely harvest, pre-treatment, drying, cleaning, particle size reduction, packaging and microbial decontamination in sequence remains common for the production of most of the spices. Inappropriate conduct of basic unit operations often lead to high microbial load, aflatoxin contamination, losses of valuable compounds, change in sensory characteristics, physical damages and incorporation of contaminants in spice products (Table 1). Moreover, spices being natural products, they may be fraught with a large number of microorganisms including several pathogenic species of bacteria and fungus depending on the prevailing conditions in their cultivation areas. In addition, poor food sanitation awareness and practices in spice producing countries may worsen their microbiological safety. Although spices are nonperishable in nature due to their low moisture contents after drying, they may act as a source of microbial populations upon contact with moist food products with no further thermal treatment. The outbreak of ‘salmonellosis’ in Germany (1993) due to contaminated paprika and paprika-powdered potato chips is an example. The aforesaid disadvantages related to conventional spice production may confound their international trade unless desired objectives of food safety management schemes such as International Commission on Microbiological Specifications for Foods (ICMSF) are met. Moreover, international agencies have set standard to guarantee safe spices and augment business interests of their adherents. For example, both the European Spice Association (ESA, 2015) and American Spice Trade Association have set a maximum level of 1% w/w extraneous matter in spices (ASTA, 2017). These challenges associated with the conventional production system may be effectively addressed by preventive risk management strategy by which suitable control measures are enforced at earlier phases of food chain prior to consumption. The control measures must guarantee that the level of contamination has not exceeded the maximum permissible limit at every phase of spice production from farm to table.

Introduction

Use of acid/base is common in laboratories for experiments like titration and proper safety in their handling laboratory is necessary. In this chapter we will briefly discuss about the safety measures necessary to be adopted while using acids/bases in laboratory for any experiment.

Handling of Strong Acid/Base

There are four major points that need to be taken care of while working with strong acids or bases that might be quite harmful if any accident happens.

1. Protect Yourself

Wear a lab-coat and acid-resistant gloves: Always use lab-coat/apron and make it sure that the sleeves properly cover your arms. More importantly, use gloves made of acid-resistant materials and also wear shoes to protect your feet while wearing long-pants/jeans. Female with long hair, must tie her hair properly (with rubber band) to avoid any disturbance caused by appearance in between.

Wear safety goggles: It is important to wear safety goggles to protect your eyes using larger and fitting goggles that cover front as well as sides of your eyes. Always use properly fitting and adjustable goggles because smaller/ loose goggles may not protect the areas around your eyes against accidental acid spills and it may fall down from your face, if it is too loose.

Locate emergency wash area: There must be an emergency washing area nearby the work place or laboratory containing lab spill management kits. All the workers in the laboratory must be aware of using the kits and emergency plans.

Neutralize acid: Don’t panic even if an acid or chemical spill happens. Stay calm and act as quickly as possible. In case an acid spills, neutralize it by using sodium bicarbonate so that they can be cleaned and disposed safely. If acid comes in contact of skin, wash it off under running tap water but do not use/ apply sodium bicarbonate on skin.

Introduction

For proper and efficient experiment to be conducted, experimenters need so many chemicals to deal with. This includes different acids, base, salt, different kind of indicators and so on. Some of these chemicals are safe for health, but some of them are dangerous to health when come in close proximity to our body while some of the chemicals cause health issues on inhaling. These may cause improper functioning of some of our physiological activities. Acids and bases are very dangerous for our tissues when come in our contact. These may cause serious respiratory problem in addition to injuries on coming to our contact. Some chemicals are exploratory yet they may cause even death of the person working with them in laboratory. Therefore, mere use of the chemicals in laboratory is not only the objective of the experimenter. The person working in laboratory should also be concerned about the proper use and handing of the chemical while working with it. Thus, every researcher of an institution who has to work with chemicals in a laboratory should be made aware about the chemicals to be used in the laboratory and the consequences if any mishandling of a laboratory chemical occurs. Not only these, suitable precautionary measures should also be known to the researcher along with ensuring the availability of the required safety equipment/installations. Hence, a proper understanding of the ways of handling of chemicals in a laboratory is of prime importance for the personals like you who are working or have to work in laboratory.

Safe Handling of Chemicals in Laboratory

Safe use/handling of chemicals in laboratory include minimized exposure to chemicals, maintaining safety data sheets, proper labelling, storage, segregation, and transport of chemicals for personal hygiene.

Introduction

We come across a variety of chemicals every day in a laboratory. While some of them are relatively safer, others are extremely hazardous. Thus, it is very important to know the potential hazards that can be caused by the chemicals present in the laboratory and the safety measures needed to be followed to avoid the hazards. Additionally, we should also be aware of the steps necessary to be taken on such hazardous situations. According to IUPAC, a hazardous chemical mean the chemical which has the potential to cause damage in various ways. In a laboratory, there are chemicals that might be irritant, carcinogen, respiratory fibrogen, systemic poison, asphyxiant, flammable, etc. which have the potential to cause hazard to the workers or environment. Therefore, it is important to use appropriate procedure to reduce the risk and protect the health/safety of laboratory personnel, the public and the environment.

Types of Hazards Associated with Chemicals

Chemical hazards: The hazards caused by chemicals can be broadly classified into three categories.

1. Health hazard: This is also known as toxic effects of chemical. The risk associated with a chemical in laboratory depends on the extent of exposure and the inherent toxicity of the chemical. Many chemical reactions form the product that might be much more toxic than the reacting chemicals. For example, inadvertent mixing of formaldehyde (a common tissue fixative) and hydrogen chloride results in the generation of bis(chloromethyl) ether, a potent human carcinogen. For most of the chemicals, the route of exposure (through skin, eyes, gastrointestinal tract, or respiratory tract) is more important (Figure 17.1) that must be considered during risk assessment.

In India, the collection, transport and distribution of raw milk involves a number of agencies and persons at rural and urban level – village producers, milk collectors, halwais (Sweet-makers), milk vendors, dairies, producer-retailers and wholesale or retail markets.

1. Collection

Usually, the milk collectors approach the small village producers to collect milk and the same is sold directly or indirectly (through agents) to a dairy (milk procurement centres) or halwais or city milk vendors or consumers. The producer – retailers themselves, in some cases, supply the milk to the above said parties. The production of milk in small, scattered holdings in village causes problems during its collection. It involves visits to many villages, some of which are not easily accessible for the purpose.

There are specific hazards associated with equipment, operation or a particular section. Such possible hazards and their preventive measures are discussed below.
I. Milk Reception Dock
    1.    Where the top of a vat, into which a 40 litre can of milk is to be dumped, is higher than the milk can, two men should lift and empty the can.
    2.    Where steam jet method of can washing is used, to avoid burning, employees would be furnished with protective equipment, including rubber boots and long aprons
    3.    Cans should be stacked in areas away from frequently used passage ways
    4.    Cans should not be stacked so high that they may fall and injure someone

Introduction

Food Safety is the assurance that food is acceptable for human consumption according to its intended use. The slogan of the World Food Safety Day 2019 “If it’s not safe - it’s not food!” portray, unsafe food is a threat to mankind. Ensuring food safety to protect public health and promote economic development is of utmost importance and it remains a significant challenge in both developing and developed countries. Food borne diseases remain a real and formidable problem, causing great human sufferings and significant economic losses. According to WHO 2019-20 World Water Day report, one third of the population of developed countries may be affected by food-borne diseases each year and the problem is likely to be even more wide spread in developing countries, where food and water borne diarrhoeal diseases kill an estimated 2.2 million people each year, mostly children. While unacceptable rates of food borne illness still remain, new hazards continue to enter the food supply.

A food safety hazard refers to any agent with the potential to cause adverse health consequences for consumers. It occurs when food is exposed to hazardous agents which result in contamination of food. In other terms it can be defined as anything that could contaminate food or could otherwise violate established food safety program criteria, if left uncontrolled. The National Advisory Committee on Microbiological Criteria for Foods (NACMCF, 1997) defined a hazard as a “biological, chemical, or physical agent that is reasonably likely to cause illness or injury in the absence of its control”.

A hazard may be introduced into the food supply any time during harvesting, formulation and processing, packaging and labelling, transportation, storage, preparation and serving. Food safety hazards are generally categorized into four classes: Physical, chemical, biological and allergens. Food manufacturers can adopt Food Safety Management Systems (FSMS), which include Good Manufacturing Practices (GMP), Good Hygiene Practices (GHP), Hazard Analysis and Critical Control Point (HACCP) and other practices to strictly check the hazards and make the food safe.

Understanding the hazards that contribute to food borne illness and injury is important to determine the necessary steps to prevent or reduce it to an acceptable level or eliminate hazards altogether before food reaches the consumer.

General Signs of Healthy and Ill Animals

Health

It is a state of freedom from disease. It may also be stated as a condition of an animal in which all the body organs are normal and are functioning to their optimum capacity in relation to animal’s age, sex, work, and production with optimum pulse, temperature and respiration rates appropriate to the species, sex and environment.

Disease

Disease may be any deterioration from normal health or normal functioning of any or all the tissues or organs of animal body. Thus, it shuns animal to perform its normal physiological functions though the nutritional and environmental parameters are maintained normal.