eChapters

Weaning foods

Introduction

Breast milk is natural and best for the growth and development of newborn babies. Although breast milk is adequate to provide an optimum nutrient till the age of six months but after that it is not sufficient to sustain optimum growth and fulfill their nutritional requirements. Various nutrients are required to supplement milk until child is ready to eat adult meal. This additional food along with the breast milk is referred as “complementary Food”. With adequate amount of complementary feeding breast-feeding continues up to two years of age and beyond so, referred as complementary feeding period.

Appropriate and adequate amount of complementary feeding helps in preventing malnutrition stunting and promoting growth. Introduction of this complementary food is called as weaning.

Weaning is the process of introducing adult food and beverage to the infant to support their growth and development. This is very crucial period in infant’s life. This is a period for diet transition as the nutrition requirements for growth and brain development is quite high. Introduction of various taste and texture promotes biting and chewing skills (Guthrie, 1975). Most six-month age children start eating semisolid foods. Weaning homogenized infant foods play a major role in the nutrition of infants (Martinez, 2004).As infants grow, their nutritional requirements also increase. To keep up this growing demand WHO recommends that infants start eating solid, semi-solid or soft foods at the age of 6 months to ensure sufficient nutrient intake.

Introduction

Oils and fats are utilized both for their food applications as well as for industrial purpose. As a food product, oils and fats are consumed in a variety of forms such as shortening, ghee, butter, margarine, cooking oil, salad oil, etc. Other uses include their usage in the form of lubricants, greases, soaps, cosmetics, paints as well as animal feed and biofuels. Among the Asian countries, Indonesia leads as the prime producer with more than fifty percent of the total palm oil production in the world. As a second-best producer of oils and fats, China was the major manufacturer of rapeseed as well as soybean oil in year of 2018. In general, Asian countries contributed to more than fifty percent of the total fat and oil manufacturing in the world in 2018 (Kushairi et al., 2018). Even though fats and oils are primarily utilized for food applications, there has been an increased interest in their industrial utility for the manufacture of biofuels. Fats manufactured from various animal sources like tallow or lard also contribute to a considerable quantity and compete with vegetable oils for the production of biofuels.

The resources for producing oils and fats are diverse depending on their end use, yet they are obtained from two major sources: animal sources and plant sources. Oils and fats are used as starting materials for the preparation of shortenings, margarines, and other tailored products that further act as functional ingredients in food products prepared by food processors, restaurants, and in home. They have been used for food and other variety of applications since the prehistoric times, due to their easy availability. For example, fatty tissues from animals liberate free-floating fats on being boiled, whereas oil can be pressed out from oil fruits and oilseeds.

The role of dietary oils and fats in human nutrition is also one of the important areas of interest. Over the time, oil and fat industry has provided significant contributions toward nutritional improvement of various products. With the growing concern linked between cardiovascular diseases and consumption of oil and fat products, low-calorie variants of different foods, free or low in cholesterol are also available now. Excessive fat consumption among the populations of developed countries and consequences of obesity has led to the development of reduced-fat and very-low-fat variants of foods.

Introduction

Military personnel’s are deployed for operation in adverse climatic conditions like desert, cold (arctic) and high altitude regions. Stressful and challenging living conditions have affected the outcome of many battles, campaigns and wars. Acclimatization to the environmental condition is a very essential stage of deployment. The time for acclimatization is restricted/limited for the effective operation towards the purpose of deployment. The performance of the military personnel in various deployed regions depends on the nutrition provided by the food consumed. The operational rations are designed to provide the essential nutrition to enhance their performance during training and/or operational situations.

Nutrition requirement of military personnel is different from that of the civilians. The nutrition requirement also varies with the kind (sedentary or continuous work) and region (plain, desert or high altitude) of deployment. The environmental stress caused by extreme heat, cold, etc. also influences the nutrient requirement/ intake. The insufficient dietary nutrient intake affects the immune function, pace of recovery from illness and injury and also the physical performance (Tharion et al., 2005).

The operational ration is also designed in such a way that it provides to the military personnel the required nutrition from the build in nutrition reserves during certain operational situations. Considering the vital criteria for nutritional requirement, the menu for the military personnel is designed. The chapter discusses the past, present and future of the army operational ration (AOR) in various countries of the world and the influence of advances in food processing methods in AOR menu.

Drying of the Spices

Drying is an important mode of preservation and it ensures microbial safety of the spices.The main purpose of drying is to increase the shelf storage and make the seasonal spices available round the year with minute losses of nutrients, flavor, taste and color (Maroulis, 2003). During drying, there is a continuous transfer of heat and mass due to the heat application which eventually leads to moisture removal from the product (Akpinar, 2006) (Hashim, 2014). Since, the sensory, nutritional and functional attributes of spices are partially or totally affected by the drying process, the adequate choice of drying technique becomes requisite. There exists a number of conventional drying methods including solar drying (El-sebaii, 2012), freeze drying (Ciurzy nska 2011), vacuum drying (Nadi, 2012), osmotic dehydration,hot air drying and fluidized bed drying (Onwude, 2016). However, these drying techniques lead to poor quality of the spices because of the longer duration of treatment and high amount of energy. To combat with the issues of poor quality, there has been a significant development of the novel techniques, which includes- microwave, ohmic, infrared, pulse electric field, radio- frequency, ultraviolet, ultrasound, supercritical and heat pump heating, in the drying of the agricultural crops. These novel techniques are found to produce higher quality products as compared to the conventional drying techniques (Moses J. N., 2014). The microwave and radio frequency heating technologies are developed in such a manner that they are capable of partial or complete removal of the conventional methods of heating/ drying (Onwude, 2016). The use of these novel techniques has gained a keen attention for the drying purpose of spices. Some of the researchers have also proved that combination of conventional and novel drying techniques leads to better product output.

Introduction

For human beings, the three most important necessities for their survival are food, clothing and shelter. among all of these food is the top most priority. Food safety and Standards defines food into 8 categories (Nutraceutical, Heath Supplements/Dietary Supplements, Food for special medical Purpose, food for Special Dietary Use, Novel Food, and Functional food) in regulation, 2016. A growing trend of health products, concept of food as medicine, associated public interest and consumers demand leads to a progressive research interest in functional foods and nutraceuticals development. Abnormal lifestyle, food habits (consumption of junk food) and low physical activity creates an exponential growth in a number of chronic diseases; obesity, cardio-vascular syndromes, osteoporosis, arthritis and cancer (Das et al., 2012) among the developing and developed countries. While nutraceuticals and functional foods are becoming an alternative affordable system to reduce the risk of disease through prevention in spite of high tech therapies and costly medicines.

The current survey showed that worldwide revenue of functional foods is projected to increase from about 300 billion U.S. dollars in 2017 to over 440 billion dollars in 2022. Also according to the International Food Information Council (IFIC), health benefits achieved from functional food components may provide benefits far beyond than basic nutrition. Products like dietary supplements containing vitamins, functional foods such as sports drinks or products fortified with probiotic play a major role in the market rise (www.statista.com).Indian and Chinese traditional foods, recipes, spices and diversified ingredient market is well known around the world from centuries. Hence, a double-digit growth rate is also experienced in Asian nutraceutical and functional food market. Another reason for the growing trend in consuming functional foods is education and proper health awareness. Furthermore, people are more concern about the optimization of health-promoting capabilities in their diet using dietary supplement and fortified foods. While, food product based industries are marketing health supplements using scientific facts and the relationship between diet and health. Government, non-government organizations (NGOs) and web-based online information also play a key role in promoting and trending food based health products.

Nano-technology refers to technology on a nano- meter scale, specifically less than 100 nano-meters. The novel nano-particles are tiny spheres (fullerenes) or tubes (nanotubes) made from carbon atoms. It facilitates the development of future inventions transversely a vast array of fields. New nano-particles are being made of silicon, ceramic, polymers or even natural ingredients that break down in the body. The characteristics that make these particles functional in the food industry include optical properties, reactivity to temperature, and biodegradability. They can be used as probes or filled with flavorings or nutrients for delivery. Highlights on the categorisation of agriculture with nano- food technology and nutrition are given in Fig 1.

There are three key elements in nano-technology. They are: (1) substances at nano-scale exhibit novel physical and chemical phenomena with novel functions (2) allowing to measure, control and operate material at the nano-scale that transform them to functions. (3) allowing the union of nano scales of materials for exceptional properties.

Introduction

Advances in food preservation methods have supported the journey of food science from that of a cookery science to a fast growing industrial technology. Food preservation knowledge deals with the way to prevent spoilage and maintenance of quality in foods. Spoilage is the deterioration in quality brought about by inherent biochemical and chemical changes, as well as microbial metabolism during food storage. Basic principles of food preservation (Frazier et al., 2008) remains the same, but newer methods for achieving the goal is added through research fuelled by a consumer demand for fresh-like foods with convenience and safety. Scientific information on novel processing methods are beautifully compiled (Cullen et al., 2011; Da-Wen Sun, 2014; Tokuþoðlu and Swanson 2015; Doona, 2018).

In-depth knowledge of physiological activities of micro-organisms in presence of preservation agents is essential for preparation of safe foods with prolonged shelf life. Besides this, it is necessary to understand the effect of food constituents on microbial resistance against inactivation agents, to identify critical dose requirement. This profound knowledge would also help to understand kinetics of microbial inactivation and to develop mathematical models suitable for a realistic design of process parameters. For better appreciation of the following sections, readers are encouraged to have fundamental knowledge in microbiology and food processing. The sections in this chapter cover advanced microbiological knowledge pertaining to the preservation aspects of food.

Introduction

Therapeutic foods are products, which are multiutility food products that may be used as nutrition as well as medicine. A nutraceutical may be defined as a substance, which has physiological benefit or provides protection against chronic disease. Nutraceuticals are used to improve health, delay the aging process, prevent chronic diseases, increase life expectancy, or support the structure and/or function of the body. Oflate nutraceuticals are receiving considerable interest due to potential nutritional, safety and therapeutic effects. The examples of therapeutic foods are the foods used for feeding of malnourished children on an emergency basis or to supplement the diets of persons with special nutrition requirements, such as the elderly. Therapeutic foods can also form a part of treatment/prevention/reduction of other health conditions such as diabetes, cardiovascular disease, obesity, anaemia and any other lifestyle disorders.

The incidences of diet-related diseases are progressively increasing due to greater availability of calorie-rich foods and a sedentary lifestyle. Obesity, diabetes, atherosclerosis, and neurodegeneration are major diet-related diseases. Nutraceuticals and functional foods represent a novel therapeutic approach to prevent or attenuate diet-related diseases.

There is always a requirement for cheaper formulations using locally available ingredients that are processed in a safe, reliable, and financially sustainable methods. Some of the literature available on health foods for various diseases is summarized below. However, since the burden of diabetes in India is staggering. In 2017, 72 million cases of people suffering from diabetes were reported and the figures are expected to reach 134 million by 2025, this chapter more emphasis is given on the safe, natural treatment/reduction of diabetes by herbal means.

Introduction

Quality is the ultimate criterion of the desirability of any food product to the consumer. Overall quality depends on quantity, nutritional and other hidden attributes along with sensory quality. Sensory quality is of great importance to both processors and consumers, since it attracts consumers; it satisfies consumers’ aesthetics and gustatory sense. Sensory quality is the combination of sensory senses of perception responsible for choosing and eating a food.

According to Institute of Food Technologists and the American Society for Testing and Materials, sensory evaluation is a scientific method used to evoke measure, analyze, and explain those responses to products as perceived through different senses like sense of sight, smell, touch, taste, and hearing (Stone and Sidel, 2004). Sensory evaluation gives a general rule for the preparation and serving of samples under controlled conditions so that unfair decisions are minimized. People for sensory evaluation are often placed in individual test booths so that the judgments they give are true and do not reflect the opinions of those around them.

Samples with random numbers are given to the evaluators so that they do not form judgments based upon labels, but rather on their sensory experiences. Products may be given in different orders to each evaluator to help measure and to ensure internal validity by controlling the potential confounds created by sequence and order effects. To control unwanted variation and to improve test precision, standard procedures may be established for sample temperature, volume, and spacing in time, as needed.

Sensory evaluation or testing is a quantitative science in which numerical data are collected to establish lawful and specific relationships between product characteristics and human perception. Sensory methods draw heavily from the techniques of behavioural research in observing and quantifying human responses. For example, we can assess the proportion of times people are able to discriminate small product changes or the proportion of a group that expresses liking for one product over another. Another example is having people generate numerical responses reflecting their perception of products taste and smell.

Introduction

Lipids are among the major components of food of plant and animal origin (food lipid). There is no precise definition available for the term lipid; however, it always includes a broad category of compounds that have some common properties and compositional similarities. Lipids are materials that are sparingly soluble or insoluble in water, but soluble in selected organic solvents like benzene, chloroform, ether, hexane, and methanol. Together with carbohydrates and proteins, lipids constitute the principal structural components of tissues (Erwin Wsowicz et al., 2004). Lipid oxidation is one of the major reasons that foods deteriorate and is caused by the reaction of fats and oils with molecular oxygen resulting in off-flavours that are generally called rancidity. Exposure to light, pro-oxidants and elevated temperature will accelerate the reaction (Velasco, J et al., 2010). Rancidity is related to characteristic off-flavour and odour of the oil. There are two major causes of rancidity. One occurs when oil reacts with oxygen and is called oxidative rancidity (Ribeiro et. al., 1993). The other cause of rancidity is by a combination of enzymes and moisture. Enzymes like lipases liberate fatty acids from the triglyceride to make di and monoglycerides and free fatty acids and such liberation of free fatty acids is named hydrolysis. Hydrolysis is additionally caused by chemical process that’s prompted by factors like heat or presence of water. Rancidity caused by hydrolysis is called hydrolytic rancidity. Oxidation cares mainly with the unsaturated fatty acids. Oxidative rancidity is off interest because it results in the event of unfavourable off-flavours which will be detected early within the development of rancidity, more so than in the case of hydrolytic rancidity. Oxidation can alter the flavour and nutritional quality of foods and produce toxic compounds, all of which may make the foods less acceptable or unacceptable to consumers. Oxidation products typically include low relative molecular mass compounds that are volatile also as undesirable off-flavour compounds (Food lipids).

Introduction

Fermentation is an alluring procedure of biochemical adjustment of essential nourishment microorganisms and their enzymes accomplish by lattice. Fermentation is a utilized to upgrade bio-accessibility and bioavailability of supplements from various crops and improves organoleptic properties (e.g., appearance, generation of sour taste and new aroma compounds, and textural changes such as consistency or viscosity) just as increase the shelf life of realistic usability. It makes foodstuff safe not just hindering the growth of pathogenic microorganisms because of antimicrobial growth of lactic acid and it also detoxifies aflatoxin. With these advantages, fermentation is a successful method to reduce the risk of mineral deficiency among population, particularly in developing nations where unrefined cereal or pulses are profoundly consumed. Tragically, it is additionally connected with multiplication of microorganisms, for ex., yeast and molds caused food safety concerns, (Omemu et al; 2011), decrease in provitamin A and antioxidant (Ortiz et al; 2017), carotenoids, just as loss of nutrients and minerals (Hotz & Gibson, 2007).

Fermentation is a minimum cost-efficient procedure for production and preservation of nutrient, therefore fermented food is an important piece of the eating regimen in numerous of the world. In the nineteenth century the scientific study of microbiology began, and just because, the scientific procedure of fermentation was comprehended. several classifications have been utilized to sort the assorted exhibit of the fermented nourishment produced dependent on various microorganisms, and food types, and kinds of fermentation included.

The microorganisms associated with fermentation process fall into three classes: bacteria, yeast, and molds. Yeasts are the principal microorganisms for the fermentation of breads, whereas molds is mainly used in processing of cheese and legumes. Bacteria is included only of the fermentation of cereal product. cereal and tuber fermentation are a lactic and acetic acid producing bacteria. yeast is a piece of mix microbial fermentation by bacteria in weaning food; all the more frequently, be that as it may, alcoholic fermentation of yeast may not totally alluring. Four genera of lactic acid producing bacteria are recognized as overwhelming cereal fermentation to be specific, Lactobacillus, Leuconostoc, Pediococcus, and Lactococcus spp. all of which require carbohydrate for the energy. Lactic acid and other natural acids produced from hexoses bring down the pH from about 6.5 to about 3.6. In the event that the pH is beneath 4.0, fermented product retard the growth of pathogens and along these lines ensure fermented items.

Introduction

The farm to fork approach utilizes agricultural products as raw material for processing by industries to obtained value-added products (Mijinyawa et al., 2007). Processing that transforms animal, vegetable, or marine materials into value-added food products for consumers and forms an integral part of agriculture for storage or size reduction into fine particles. One of the major problems associated with processing is the unavailability of processing facilities including appropriate engineering materials for the transformation of agro-based produce into different forms (Ogwuagwu, 2007). This transformation process mainly includes operations like particle size reduction, milling or comminution, etc. utilizing different size reduction forces without making alterations in chemical properties (Enrique, 2012). This enhances the eating quality or appropriateness of foods for advance processing with a more varied range of available products.

Grains are dried small seeds with adhered or removed husks or outer layers processed for consumption (FAO, 2011). The two major types of commercial grain crops include cereals (such as millet, corn, sorghum, wheat, rye and so on) and legumes (such as beans, groundnuts and soya beans). These grain crops are subjected to a milling operation to break them into smaller pieces or more practically appropriate form. The grinding process involves the application of different mechanical forces to overcome the interior bonding forces bringing change in the state of solid grains to different desirable forms such as flour or meal (Kaul and Egbo, 1985). As a result, the physical state of these grains is modified due to a reduction in size and change of shape (Ryan and Spencer, 2008). Most of the actual milling processing that is used in various industries is based on simple operations. But now various technological progress has been initiated that involves the adoption of computer control for various milling operations to improve efficiency and quality while minimizing labor requirements. Hence, the present text highlights the various technological advancements and evaluation techniques employed in milling operations.

Introduction

Cereals and cereal products comprise a long history of consumption by humans. Cereals are the important source of nutrients and non nutritive health beneficial components and for that reason cereal based food products are consumed as staple food in human diet in developed as well as developing countries. The cereal grains mainly cultivated and consumed as food include rice, maize, wheat, sorghum rye, barley, oats, and millet. Products obtained from cereal grains are flours, grits, semolina, breakfast cereals, extruded product like pasta, puffs and flakes, and bakery products such as bread, biscuits, cakes and tortillas. Moreover, cereals or their components are used as ingredients in the preparation of various food products such as beverages infant foods coatings and processed meats. Initially cereals are consumed as whole or with minimal processing like boiling, grinding and roasting. However, processing like salting, drying, steeping and fermentation of cereals for preparation of cereals based beverages and foods has been practiced since the initiation of cereals consumption as food by human. Increasing consumer awareness and commercialization of cereal products have created interest of food manufacturers in utilization of novel and more efficient technologies with optimized conditions, development of convenient and more health beneficial foods with satisfactory sensory properties and wide variety of foods to ease the choice of consumers. Market full of diverse range of snack foods, breakfast cereals, ready to eat and ready to cook foods, and novel functional foods with variation in appearance, texture and flavor is an indication of evolution of food industry from basic to complicated form focused on efficient and automated operations. In ancient times, fermentation of food was done with the aim of enhancement of shelf life and palatability without clearly knowing the role of microorganisms. Modern fermentation technology uses various operations and specific strains of microorganisms for conversion of bulky and perishable materials into novel foods with more pleasing flavour, enhanced functional properties and extended shelf life. In addition to basic bread, new varieties of bread developed with improved functionality like sourdough bread, gluten free breads and high fibre breads is an example of innovation in cereal fermented foods indicating modification in ingredients, microbial culture and processing technologies as compare to traditional fermentation process. The word “extrudate” is derived from the Latin word “ex” meaning ‘out’ and “trudere” meaning ‘to thrust’. Extrusion technology is turning out to be very popular in food industry due to its versatility, usefulness and cost efficiency. It is well-organized state-of-art technology and plays important role in various food industrial processes such as cooking, mixing, conveying, shearing and shaping of end products. Extrusion cooking is high temperature short time (HTST) with high pressure process, is especially used for preparation of cereal based snacks, fat replacers, breakfast cereals, infant formula, gluten free foods, starch and protein rich cereals food products. A wider range of ready to eat food products with different texture, size and shape is produced by fast and easy extrusion cooking. In epidemiological studies it is stated that whole grain consumption is more health beneficial than refined grains and the reason behind it is that dietary fibre and phytochemicals located in germ and seed coat are generally removed during milling or polishing. Various technologies are developed by food scientists and technologists to preserves the bioactive compounds during processing and or to supplement processed food products with the bioactive compounds during food preparation to maintain the bioactivity and functionality of final products. Utilisation of whole grain flours, composite flours, supplementation of cereal foods with ingredients from fruits, vegetables, plant extracts and legumes, bio-fortification of crops, implementation of genetic engineering to produce crops rich in bioactive compounds are some technologies which are being used in modern food industry to develop value added cereal food products.

India is the largest producer of pulses and contributes around 25% of total global pulse production. In addition, it is also world’s biggest consumer (27% of world consumption) and importer (14%) of pulses in the world. Pulses account for around 20 per cent of the area under food grains and contribute around 7-10 per cent of the total food grains production in India. Though, pulses are grown in both Kharif and Rabi seasons, Rabi pulses contribute more than 60 per cent of the total production. Gram is the most dominant pulse having a share of around 40 per cent in the total production followed by tur/arhar at 15 to 20 per cent and urad and moong at around 8-10 per cent each. Madhya Pradesh, Maharashtra, Rajasthan, Uttar Pradesh and Karnataka are the top five pulses producing states in India. Considering the nutritional importance of pulses and its products in Indian diet, the production and availability are not sufficient. Since independence, grain production has grown dramatically but pulses production and its availability have declined. On the other hand, the per capita availability of cereal and millets has increased in spite of a four-fold increase in population. The consumption ratio of cereal-to-pulse has risen from 6:1 to 12:1.

Pulse processing is the major need of developing nations as it is the most acceptable and cheap source of protein and hence can help combating Protein Energy Malnutrition (PEM). In addition, the identification and recognition of various newer and improved processing methods can provide the basis for further development of legume processing industry. Traditionally, home cooking is applied for consumption of pulses since ages. Modernization has no doubt created a lot of ease and developed various techniques to make different edible forms of legumes/pulses. Many advancements have been happened in traditional processing methods (milling, fermentation, roasting, boiling, steaming etc). and resulted into new products. Improved techniques for efficient milling of legumes into dhal (dehusked splits) are an important area of investigation. A systematic method that eliminates wastes and losses has great significance in the Indian dietary pattern. New systems for processing legumes come under several main categories, namely, improved decortications and milling techniques; quick-cooking pulses; canned pulses; pulse flakes, expanded snack foods etc. Such new and innovative processing technologies presented in this chapter can be applied and used in developing nations. Present chapter will discuss both traditional and non-traditional means of pulse processing.

Introduction

Food processing comprise of techniques employed to transform raw ingredients into final food product or to preserve the food product. Food processing industry as well as at domestic scale the food processing methods aim at providing processed food products for daily consumption by humans and animals. Food processing aims at increasing the shelf life, preserve, make nutritious or ready to eat foods, and getting the best quality final products. There are various techniques and methods which come under food processing such as drying, dehydration, fermentation, pickling, freezing, mixing, pumping, pasteurization, cooking and homogenization etc.

Rheological properties of foods are greatly influenced by various unit operations and processing methods or conditions such as heating and mechanical treatments. Processing of different food products such as dairy, fruit and vegetable products like jams and purees, chocolates, dough development etc. and basic make up of foods such as fats, proteins and others such as emulsifiers, hydrocolloids etc. affects the rheological properties of food product and which ultimately affects the quality of end product. Apart from processing conditions the compositional variations have a great impact on the textural or rheological properties of foods. The changes in rheological characteristics of a food product reflects the alterations in the molecular structure of the food material, this can aid in revealing the changes in product structure during different processing methods or conditions. In designing of various processes such as cooling, freezing and equipment design information about thermal properties is crucial. Moreover, in order to design storage structures for foods and refrigeration equipment the knowledge of thermal properties is important (Becker et al. 2003).

For rheological measurements various tests and techniques are available, such as steady and dynamic shear measurements. From the steady shear properties flow properties of the sample can be revealed whether the flow is Newtonian or Non Newtonian. In case of dynamic shear rheological properties information on viscoelastic characteristics can be withdrawn in terms of storage and loss modulus and depending on the predominance of each modulus the nature of sample can be predicted i.e. whether viscoelastic solid or viscoelastic fluid (Bhardwaj et al. 2019). Apart from these measurements, other rheological measurements are available for specific food materials, such as farinograph, alveo-consistograph, mixograph etc. are meant for study of rheological properties of dough. So, accordingly, depending upon the food material choice of rheological measurement can be made. To study the thermal transitions DSC (Differential scanning calorimeter) and DTA (Differential thermal analysis) are commonly employed. Dynamic measurements as a function of temperature or time are made in these techniques to detect the endothermal and exothermal changes. These techniques can be used to determine the phase transitions in various foods, for instance, crystallization and melting of water, lipids and other food components; denaturation of protein; gelatinization of starch and others (Roos 2015).

Advancements on sugar processing

India has popped out as one of the largest sugar processing country throughout the world. Through the collaboration of research and development carried out in the field of sugar processing, this industry has witnessed the vast changes in term of technology. Important considerations such as productivity improvement and cost reduction were the main objectives in the field of sugar processing. Sulphur dioxide was earlier used but afterwards lime treatment in clarified juice helped in the processing of white sugar from sugar cane. Since then the continuous progress and improvement has been made and advanced techniques are introduced for manufacturing of sugar with modern tools.

Ramjeawon (2004) reported that farmers and agriculture workers grow sugar cane and beet root for sugar production,providing about 20 kg per capita and that is equivalent to almost 13 percent energy requirement. Fechter et al. (2001) reported that production of the white sugar was focused more on juices rather than molasses which were taken as the raw material. Various processes such as ultra-filtration, de-mineralization and de-colorization were used for the production of white sugar. The traditional refining process wascheaper, and effective in terms of purification and juice purification was the method used for the processing of white sugar directly from the sugar cane. Crystallization was one of the process which is used for increasing the recovery of sucrose and it reduces the molasses production. Chromatography was used in the sugar industry for the separation of sucrose. Another method was ion exchange demineralization which was used in the sugar industry for the removal of minerals from the liquid sugar. Later adsorption has been incorporated to be used de-odorization and de-pigmentation. Membrane filtration is latest technique used in the process which was used for maintaining the quality of white sugar by removing unwanted particle from the juice. Velásquez et al.,(2018) reported that thermal processes are also used for the production of sugar from sugar cane. Non centrifugal cane sugar processing is used for this purpose and the product is obtained by evaporating the sugarcane which has the unique flavor and aroma. Later the product is used as the sweetener and has a traditional characteristics flavor and optimum nutrition.

Introduction

Baking is not a new concept to us. Baking process dates thousand years back since the Paleolithic age. During those days, the baking was done by simply grinding the grains, mixed with water and baked on the hot rocks. The bread produced that time was not leavened but flat. Ancient Egyptians have the credit for development of baking between 2600-1200 BC. Roman Empire also had the popularity of the art of baking and bakeries were in existence in Europe too during Middle Age. Baking was considered a highly respected profession under the Roman Empire. The art of baking has travelled a long journey since then. The bakery and confectionary has undergone a gradual evolution with time. Great technical progress stared in the nineteenth century. Development of automatic machines reduced the task of the manual labour and because of this development the bakers could perform many more tasks with the machines. Today’s baking has a dependency on the machines. All the work is performed by the automated machines whereas the bakers only control the machine operations. The baking process has become easier, the efficiency has increased and the quality of the products has improved because of these high-tech machines. The preparation of bakery products using traditional methods has also improved over the time to minimize the energy and time consumption. Today’s consumer is very much concerned about his/her health and look for the healthy options in baked products. The trend has led to various innovative formulations for the baked products so that the health benefits may also be provided not only the calories. This chapter will discuss various advancements and trends in different types of bakery and confectionary products.

Introduction

Food is the basis to sustain a healthy life as evidenced from its consumption through centuries by human. There are plenty of plenty of foodstuffs available these days as part of new product development and flexible global participation of researchers and food technocrats. Their researches brings a lot reforms in traditional recipes through newest technological concepts (functional or nutraceutical) that address much of safety aspect for consumers health and is the prime focused concern for now (Keservani, et al 2014). Even than strict labeling policies is the present hour need to stay fit and fine. Safe and wholesome supply of foods, high pace food demands, increase in processing aspect, minimization of fraudulent practices are the key points that somehow require laws and standards during transportation, storage, marketing and storage.

Nation’s growth resides in their healthy people that contribute flawless to acquire achievements in overall growth of country. So availability of healthy food is must which can only be governed through strict standards and regulatory agency’s regulation. Journey of food from “Production to consumption”, “Farm to fork”, “Unstable to table” and “Boat to throat” are the activities where these agencies abide their regulations by way of laws and standards. Indian market somehow lacking its policy to organize food regulation appropriately hence is segmented in two types of food products viz;

Over the past several years, there has been significant change in consumer perception on quality and food safety. Consumers are demanding healthy, nutritious and cost-effective products processed under controlled hygienic conditions. Food safety concern, in recent years, has become dominant and important. The requirement of food safety and quality assurance has never been so demanding as it is now. Globally food safety is being addressed independent of food quality. In anticipation of consumer demands on food safety, food sanitary standards at national and international levels are under constant review. Several inter governmental agencies / organizations are engaged in work related to quality assurance and food safety. Amongst these World Health Organization (WHO) and Codex Alimentarius Commission (CAC) play the major role in protecting public health and defining standards of quality and safety aspects of foods for regional and or world wide usage.

Regulatory Institutions

The quality environment in the Indian food processing sector revolves around compulsory legislation which specify minimum standard and certification system. Legal standards are generally made to have control over the quality of foods offered for sale and to safeguard the consumer from health hazards posed by practice of adulteration. There are basically three types of Indian standards namely

The growing chemicalization of milk presents a great challenge to the dairy industry. A number of chemical compounds get entry into milk, intentionally or un-intentionally, through their direct or indirect usage for crop, animal; or dairy husbandry practices, as environmental contamination. Several of these contaminants may be naturally present on grazing grass or use as pesticides for green fodder or they may get entry through use of compounded animal feeds. These eventually get excreted into milk as residues and pose problems to food safety. The risk of health hazards arises from veterinary drugs, residual pesticides, heavy metals, detergents and micotoxins etc. It is therefore, become necessary to detect these contaminants in order to make food safe for human consumption.

Detection of Aflatoxin M 1 in Milk

Material requirements : Glass column(30 cm x 1 cm), Silica gel (63-200 µg particle size), volumetric flasks, beakers, micro pipette, HPLC equipment fitted with C 18 column(25 cm x 4.6 mm) and fluorescence detector.

Reagents: Sodium chloride solution (400g in 1000ml water), acetonitrile/water mixture (25:75), sodium sulphsate, chloroform, toluene/acetic acid mixture (9:1), acetonitrile/diethyle ether/hexane mixture (1:3:6), chloroform/acetone mixture (8:2), n-hexane and aflatoxin standard ampule.

Preparation of stock solution : Transfer contents from 2.5ml or 0.5ml ampoule, quantitatively, to 25ml or 50ml volumetric flask respectively. Rinse ampoule with small quantities of chloroform and collect rinsing into flask. Makeup the volume with chloroform, mix well and store at 5º C or below. These solutions will contain 1 µg per ml aflatoxin M1.

Working solution : Transfer 0.5ml of stock solution to a 10ml conical flask. Evaporate contents to dryness using inert gas. Dissolve residue in 10ml of acetonitrile/water mixture. Prepare series of dilutions containing 0.0025, 0.005, 0.01 and 0.025 µg/ml aflatoxin. Similarly treat 5ml of stock solution to give a concentration of 0.5 µg/ml.

India has emerged as the largest producer of milk in the World. This has boosted the confidence of producers, planners, dairy entrepreneurs and scientist alike. India has poised to play a major role in global dairy market in coming decade. The rapid growth of science and technology has positive impact on our life style and with strong trend of urbanization several demographic changes are likely to occur. There going to be ever increasing demand on the role of milk and milk products for human health. Accordingly, the demand for higher standards of milk products in terms of hygiene and safety of dairy products is to be followed. The competitiveness for the export of milk products among different dairy industry has increased in recent times due to GATT agreement. The biggest challenge before Indian dairy industry is the quality and safety of milk products indented for human consumption. Legal standards are made to have control over quality of food offered for sale and to safe guard the consumer form health hazards. It is therefore, imperative to determine different parameters that define product quality and safety. The purpose is to ensure production and distribution of products within well defined and accepted standards. This chapter deals with various parameters of product testing in order to maintain requisite prescribed standards.

A. Estimation of Calcium

Requirements : Pottasium permanganate solution (0.1N) – Dissolve by heating 33g of potassium permanganate in 1000ml distilled water and allow to stand in coloured bottle for several days. Filter contents through 6mm thick film of asbestos mat on Gooch crucible.

Asbestos mat – Digest asbestos with dilute hydrochloric acid(1:3) for 2-3 days, wash free from acid and digest with 10% sodium hydroxide for few days, wash free from alkali. Digest with dilute Nitric acid(1:3) for several hours and wash. Shake with water into fine pulp and digest with 0.1N potassium permanganate solution that has been acidified with dilute sulphuric acid (1:3), for 1 hour and wash. Use this pulp for layering 6mm film on Gooch crucible.

Dilute hydrochloric acid (1:4), Ammonium hydroxide solution (1:1), Saturated ammonium oxalate solution, Diluted sulphuric acid (1:4)

In the last decade or so, the problem of determining the microbial content and their activities in dairy products has been under close scrutiny. The dairy industries still adopt the dye reduction test because it is cheap, simple and satisfactory. However, other new techniques have been introduced along with some modifications in traditional tests. The microbiological quality must be maintained. To assess the bacterial content and their activities in dairy products, various methods are available for the microbiological testing of milk. The specific tests should be chosen as per the application and other factors like cost etc. On the basis of public health and economic consideration it is necessary to test microbiological quality of milk at a number of points along the chain from producer to consumer which includes - raw milk supply, bulk milk arriving at processors premises, monitoring bulk milk during storage prior to processing and monitoring the procession & the quality control of finished products. The techniques for estimating bacterial numbers in raw material are divided into two categories.

Laboratory Tests

Sampling procedures

Samples from number of containers- As soon as the cans are received at the reception dock, remove the lid, mix contents of each can with a plunger and draw equal quantities from each container and mix together. Draw approximately 80 – 100 ml of sample for testing. If the cans are of same diameter, Alternatively, milk from different containers are first poured into a vat and then the sample is drawn by thorough mixing as above..

Samples from storage tank – Before drawing sample from storage tank, switch on the mechanical agitator and allow the contents to mix for 15-20 minutes. Discard first 1.0 L of milk. Transfer 250-500 ml of the mixed milk from the outlet valve into a sample bottle.

Samples from rail / road tankers- Open the lid of the tanker and insert a big plunger through the main hole and move it forward, downward and backward bring the plunger to the surface at each stroke. Continue mixing for 15-20 minutes. Draw proportionate quantities of sample with the help of suitable dipper from different levels. Draw 250-500 ml of well-mixed sample into the sample bottle. The total volume of individual composite sample should not be less than 150 ml.

Milk is a product of biological origin and is a suitable vehicle to accommodate any additive without apparent changes in its look. The quality of milk and its products depends upon quality of raw milk used in their manufacture, processing and handling conditions. It is therefore, necessary to check quality of raw milk to assess its suitability for processing, through various quick tests called “Platform Tests”

Raw milk quality assessment

(A) At collection center: - Milk from various suppliers is generally collected at dairy factory or privately owned collection centers located in marked area of milk sheds. The quantum of supply may vary from 2 – 100 Liters. As each supplier has to be paid in relation to quantity and quality of his produce, it is important to draw samples and ascertain its quality by performing quick tests for the purpose of acceptance or rejection.

Sampling procedures - The sampling procedure differs according to the nature of material and the purpose for which the sample is required. The sample collected for chemical analysis should be representative of the entire batch. Thorough mixing with proper instrument is essential to ensure representative sample. Samples for chemical analysis are to be delivered the same day for testing. If un-avoided, add small amount of preservative (Formaldehyde) to prevent deterioration and bear label to the effect.

Sample from single container – The procedure involved is thorough mixing of contents. If it is small container the contents should be poured from one vessel to another with swirling. In case of can the contents should be mixed with the help of plunger which should be moved up and down and sideways for about 10-15 times. The sample is then drawn with the help of dipper from different levels and collected in clean and dry sample bottles.

The functioning of the Women Dairy Cooperative Societies depends upon the variations in managerial capacity leading to profit and loss of different WDCS. To make an in-depth analysis, the study was undertaken in undivided Cuttack and Dhenkanal district of Odisha covering 22 randomized WDCS with a sample of 110 women respondents.

The analysis of the findings after statistical treatment have been presented objective-wise as follows;

Socio-economic profile of the members of WDCS involved in dairy production activities.

Gap between procedures prescribed and followed in formation and functioning of WDCS.

Identification and analysis of key performance areas in the WDCS.

Determination of management practices and milk production profiles of WDCS members.

Extent of participation of women members in dairy activities.

Entrepreneurial characteristics of members of Women Dairy Cooperative Society.

Impact of WDCS on socio-economic status of the members.

Correlating variables and their interrelationship in predicting smooth functioning of WDCS.

Constraints faced by the WDCS members.

Suggestions of members for improvement in functioning of WDCS

The major focus of the study was to critically analyse the overall performance of Women Dairy Cooperative Societies (WDCS) in two districts of Odisha. The methodology used in carrying out investigation has been outlined in eight sections as mentioned below.

1. Selection of problem
2. Research design
3. Plan of work
4. Locale of the study
5. Sampling procedure

The study was undertaken in the state of Odisha. The state lies in between 17^o-31’ to 22^o-27’ North latitude and 81^o-27 to 87^o-30’ East longitude. It is bounded by West Bengal in the north east, Jharkhand in the north, Chatisgarh in the west, Andhra Pradesh in the south and Bay of Bengal in the east. The main features of the state is appeared inTable 3.1.

Status of Women

As per 2011 Census, women account for 586.46 million, and represent 48.5% of India’s total population. However, from global perspectives, they constitute half of global population, and 1/3^rd labour force, but receive only 1/10^th of world income, and own less than 1% of world’s property. Further from national point of view as Reddy et al. (1994) in his study opined that “although women constitute 50 percent of India’s population, perform two-thirds of the work and produce 50 percent of food commodities consumed by the country and they earn only one-third of the remuneration and 10 percent of the property or wealth of the country.

The vast majority of working women are uneducated cultivators and agricultural labourers residing in villages. Most of the women, working on the family farm are unpaid labourers. 63 percent of all educated women with at least a high school certificate are unemployed, and of the 37 percent who are employed 15 percent are clerks, 5 percent teachers, 7 percent nurses and 10 percent are other professionals. Only 6 percent of Government employees are women (Jain, A.K. 2004). Rural Women form the most important productive work force in the economy of majority of the developing nations including India. Agriculture, the single largest production endeavour in India, contributing about 18% of GDP, is increasingly becoming a female activity. Agriculture sector employs 4/5th of all economically active women in the country. 48% of India’s self-employed farmers are women. There are 75 million women engaged in dairying as against 15 million men and 20 million in animal husbandry as compared to 1.5 million men.

Despite progress in several key indicators, a gender analysis demonstrates that women continue to be relatively disadvantaged in matters of survival, health, nutrition, literacy and productivity. Further, more than 90 percent of rural women are unskilled, restricting them to low paid occupations. Women generally have no control over land and other productive assets which largely exclude them from access to institutional credit. Further, agricultural wages for women, on an average 30-50 percent less than those for men. Though they work for longer hours under inhospitable conditions, their participation in decision making process is less than desirable.

Livestock Population and it’s Economic Contribution

According to 18th Livestock census of India (2007), India has about 199.1 million cattle, which constitute 44.29 per cent of Asian and 12.7 per cent of the world cattle population. The current buffalo population is 105.34 million which accounts 57 per cent of Asian and 55 per cent of the world buffalos. The major output of the entire livestock sector is from the milk, which is the second most agricultural commodities next to paddy. According to the annual report of the Ministry of Agriculture and Cooperation, during 2006-07, the contribution of milk alone (Rs.1,44,386 crore) was higher than paddy (Rs.85,032 crore), wheat (Rs.66,791 crore) and sugarcane (Rs.28,488 crore). The value of output from meat group animals as per estimates of Central Statistical Organization (CSO) at current prices was Rs. 34, 310 crore during 2006-07. Total export earnings from livestock, poultry and related products were Rs.5,213.80 crore during 2006-07. Eighty percent rural households keep livestock for their subsidiary income, important for employment, livelihood, nutrition, constant flow of quick and fast income, reduces the vulnerability of agricultural production. Trends indicate that animal protein consumption would rise proportionately with increase in income. The 18th Livestock Census (2007) has placed the total livestock population at 529.698 million and total of poultry birds at 648.830 million.

    1.    What is the percentage of water in an adult’s body weight
        a)    50%    b)    60%
        c)    90%    d)    70%
    2.    __________ is a direct reactant in hydrolytic processes of many foods
        a)    Water    b)    Moisture content
        c)    Both a&b    d)    None
    3.    The bond angle of the isolated water molecule (vapor state) is
        a)    109°    b)    104.5°
        c)    109°28'    d)     103.6°

Introduction

A food safety system revolves around different aspects, beginning right from the farm, where the food is created and transported to where the customers purchase, eat and dispose. This includes production, processing, distribution, preparation, marketing, access, consumption, and disposal. These processes need to have numerous resources like people, business, farms, communities, interventions, policies, and politics. All steps ought to be coordinated for an organisation to make progress. In today’s world of processed foods and industrial farming practices, ingredients and preparation procedures are typically uncertain. In order to reduce the confusion of consumers and to provide quick, straightforward identification of the commodities they’re searching for, many items are now “certified” by revered organizations.

Food safety certification is a third-party verification, to ensure that commodities, processes or systems in the food supply chain meet accepted food safety standards. It is distinct from different systems like supplier declarations, laboratory test reports or inspection body reports. Food certification is predicated on the results of tests, inspections and audits and provides confidence to the buyer as a result of an organization’s commodities or system are being completely evaluated against accepted national and international business standards by a competent third body.

Introduction

Food and water safety is a public health concern. “It is health that is real wealth and not pieces of gold and silver” is a famous quote by Mahatma Gandhi. To provide good health and to maintain it properly for all citizens, the country need to assure the quality and safety of food consumed by it's population (Attrey, 2016). Apart from nutrition and taste, a more important part of food is the safety standards during manufacture, storage, distribution, sale and import. Food safety is particularly important in India, where an inordinately high percentage of population suffer from malnutrition and food borne diseases (Bahuguna, 2016). Food borne diseases in India have increased the frequency of mortality and morbidity. Around 5.82 crore cases of food borne diseases and 3.51 lakh food associated deaths were reported in 2010. Nowadays the consumption of unsafe food is being considered as an alarming threat to the growing global food markets. Adulteration and synthetic milk in India, powdered infant formula with melamine in China and adulteration of beef in Europe are a few examples. These issues can be resolved to a great extent, through appropriate food laws and policies. A country should not only possess appropriate statutory, regulatory legislations, policies in place for the su-pply of safe and good quality food at all times, but also should assure that the same is imple-mented seriously (Attrey, 2017).

Apart from health, food safety is vital for economic growth and progress as well. In India, the food processing industry holds tremendous opportunity. It has high employment potential, can boost exports of agro-products out of the country and also provide better returns to farmers for their produce. The concept of food quality and food laws is not totally new in India because food was considered an important aspect of healthy living even in ancient India. India took an important step towards building a safe food culture a decade ago by enacting the Food Safety and Standards (FSS) Act. In one stroke, it brought about a paradigm shift in the way we look at food safety regulations in India. Food Safety and Standards Authority of India (FSSAI) are mandated under Food Safety and Standards Act 2006 to protect people from this threat. In its role of a food regulator, FSSAI can be proud that it touches the lives of each of the 1.3 billion people in the country. More than just reaching the people, the watchful eye of FSSAI is assuring them that the food they get in any form, raw or processed is safe to consume (Agarwal, 2016).

Introduction

Food quality control systems in all sectors of food chain around the globe are driven by guidelines to help the authorities to enforce rules and regulations to protect the public from fraud and deception in various levels of food production and facilitate fair trade. This also helps authorities to select suitable options of infrastructure and enforcement mechanics. Such documentation provide possible infrastructure and approaches to national food control systems to use them or further improve them wherever needed (Temesgen, 2015). To make a food control system most effective; it is strengthened by improving the existing fragmented legislation, multiple jurisdictions, and weaknesses in surveillance, monitoring and enforcement in many countries. Organisations like FAO and WHO help enforce food laws and regulations to meet a country’s sanitary as well as phytosanitary requirements.

Generally, food law may be divided in two parts: (i) a basic food act, and (ii) regulations. The Act itself give broad principles, while regulations contain detailed provisions governing the different categories of products coming under the jurisdiction of each set of regulations. Detailed provisions are needed for effective administration of and enlightened compliance with the basic food laws. In governments where there is a division between the responsibilities of the legislative and executive branches, the legislative branch enacts the basic law, while detailed regulations are elaborated and promulgated by the executive agency or agencies responsible for administering the law. Regular revisions of regulation is necessary because of novel scientific knowledge, change of processing technology, or quick action to protect public health. Such revisions can be made much more expeditiously by executive agencies than by legislative bodies. In some of the countries food standards are a part of the regulations; in the other countries they are separate enactments.

Introduction

The conventional thermal processing technologies are dependent on high temperature to control the growth of pathogenic and spoilage causing microorganisms. However, the exposure to high temperature for prolonged time results in several biological, chemical and physical modifications leading to their sensory, nutritional and textural changes. Currently, consumers are more interested in minimally processed food products with improved safety and shelf life. In order to fulfill the market demand, innovative non-thermal food processing techniques to inactivate the microorganisms have been developed. These techniques retain freshness, nutritional value and sensory characteristics of food items without any significant thermal degradation.

Non-thermal technologies are used in interdisciplinary sciences, and in many other applied areas. The three main pillars related to the use of novel food technologies are food safety, quality and environmental impacts. Besides the food safety and quality dimensions, these non-thermal processing technologies have the possibility to shorten treatment time, lower energy consumption, and lower carbon footprint. Depending on the source of energy transfer, non-thermal technologies have different types of action. It includes inactivation of microorganisms in radical formation (plasma, ultrasound, ozonation, UV light, etc.); mechanical action through hydrodynamic effects, shock waves (ultrasound and plasma), electric and magnetic fields; or extremely high pressures that are causing disruption of the cell organelle.

The novel non-thermal technologies destroy the pathogens at room temperature as well as utilize less energy compared to conventional ones and have the potential of developing new food products having distinctive functionality. For optimizing the product quality, time for processing and also to inactivate the enzymes and bacteria, each of these techniques can be used either alone or in combination. The adverse effect of some technologies on the sensory, texture, and nutritional values of food could be overcome by using hurdle technology. Combination strategies are more efficient for improving the food quality and have the potential to ensure the microbial safety of foods. An overview of the effect of novel process technologies on the quality and safety of food is elaborated in this chapter.

Introduction

Packaging helps to maintain the benefits of food processing and enables safe transportation of foods from their point of origin to point of consumption without compromising the wholesomeness of processed food in terms of its physico chemical and microbiological quality. However, packaging technology must balance protection effects with environmental issues, material and energy costs and should comply regulations on municipal solid waste disposal and release of pollutants. These regulations are different in jurisdictions around the world.

Safety implications of food packaging raise concern in recent times due to advances in technology leading to variety of packaging materials and additives. Also there is an alarming situation of damages to environment and natural resources of the planet, due to indiscriminate use and disposal of packaging materials.

However, food packaging as a means to protect and preserve food integrity, to enhance its shelf life and improve consumer appeal cannot be overlooked.The applications of food packaging and its primary role to protect and preserve food has remained the central focus of packaging innovations.Packaging materials are available in variety of forms and are made up of variety of ingredients.While paper. While paper, plastic, petroleum based materials have been in use for many years, the recent approach is towards environment friendly options from agricultural produce such as plant fibres sugars and starches. Advances in packaging has led to development of newer materials and combinations with specific economic and functional benefits.Food packaging ,in general , provides the ability to withstand thermal processing and acts as a barrier against light, moisture,oxygen and other sources of contamination.

Introduction

The green revolution which initiated in India during 1960’s to 1980’s was an attempt to overcome the then prevailing threats of food scarcity and lack of foreign exchange. The food scarcity was a result of severe drought which engulfed the country as well as the political situation it had to face after its short period of gaining independence (Reddy, 2010). The only way out to overcome the acute food scarcity was intensive agriculture, with the use of high yielding varieties, chemical fertilisers and pesticides which heavily boosted agriculture production in India. The remarkable increase in production and productivity resulted in non-judicious use of chemical inputs to extract the maximum from the degrading soil. This marked the era of soil, water and air pollution and extreme health hazards to all life forms.

Rachel Carson’s “Silent spring” in 1962 was an insight into the path of DDT the then prevalent pesticide through its effect on the food chain as well as the environment. She was one among the scientists to raise her voice against the indiscriminate use of pesticides. The evident impacts raised concerns over the continued use of chemical inputs (Lairon, 2010). The situation warranted the reduced or limited use of chemicals in agriculture which resulted in an “organic movement”. This caused a slow, but evident shift in the interest of growers and consumers towards organic agriculture for health security, food safety, quality and better returns (Niggli et al., 2007).

This review is an attempt to analyse the various factors affecting the safety and quality of organic food products in comparison with conventional food. Drawing a proper conclusion was a difficult task due to the limited availability of scientific papers published in this aspect, indication of only trends rather than solid proofs and non-revelation of non-significant data regarding related experiments. However, this review could evaluate the positive and negative aspects of organic cultivation and food production from the available data, so as to suggest measures for improving the quality and safety of organic food products.

Introduction

Food is a culture, emotion, hospitality and prestige which is closely knitted with tradition. Traditional knowledge is a community based functional knowledge system which is developed, preserved and refined by generations through continuous interaction, observation and experimentation with their surrounding environment. It includes beliefs, values, and practices gathered from the practical experience of older generation, and its whole function is survival and development of culture of people. Traditional foods, originated from ancestral kitchens are developed through ages, invented, modified, utilised and evolved to improve nutritional and social wellbeing of the people around the world. Most of them are culture specific, region specific, environment specific, community specific and season specific. These foods are socially, culturally and economically important and provide food security, enhance livelihood and improve nutritional and social wellbeing of people. Food culture arises out of the place of a people’s origin and so traditional local foods hold the potential to bind and stabilise communities and enable a cultural continuity through conserving their histories. Indian cuisine is represented as a wide spectrum of food cultures with distinctive regional differences and preferences (Achaya, 1998).

Street Foods-An Introduction

The National Policy on Urban Street Vendors (2004) defines street vendor as a person who offers goods for sale to the public without having a permanent built-up structure but with a temporary static structure or mobile stall (or head load). Street vendors may be stationary occupying space on the pavements or other public/private areas, or may be mobile in the sense that they move from place to place carrying their wares on push carts or cycles or baskets on their heads, or may sell their wares in moving trains and buses. The total number of street vendors in India has been estimated to be ten million and the number of street food vendors has increased sharply in the past few years (Bhowmik 2005).

The preparation and sale of street food is an age-old activity with historical roots and complex socio-economic and cultural implications. Street food vendors are mostly outside the regulation of the governments and unregistered thus making them an informal sector. Similar to most other informal sector enterprises street food operations too are carried out with minimal investment, infrastructure and as familial operations. Street food outlets are seen mushrooming at crowded public places like bus stands, cinema halls, market areas and parks. They operate as temporary structures or as pushcarts parked near the roadside or at pavements. Most street food vendors operate their food stands alone and are able to generate sufficient income for sustenance.

Introduction

Thermal processing is an important treatment for food preservation is, especially in the manufacture of shelf-stable foods with specific nutritional properties. It is also indispensable for determining the sensory properties, particularly, colour, flavour, and texture of fried, baked, and roasted products. As a result of heat treatment, chemical changes induced, and a plethora of new molecules are formed in foods, some of which have been claimed to be health-promoting antioxidants and anti-mutagens. However, reports suggest that thermal processing leads to the formation of certain toxic compounds, so-called process-induced contaminants in foods. The process-induced toxicants are certain compounds which are formed in food as a result of food processing, exert adverse toxicological effects, and cause potential health risks to humans. Acrylamide, furan, chloropropanols, heterocyclic aromatic amines, polycyclic aromatic hydrocarbons, and N-nitrosamines are some well-known examples of thermal process contaminants.

Introduction

Food additives are substances of natural or synthetic origin, which are added to foods to serve a certain technological or sensory function. They are utilized in the preparation and processing of almost all types of food in order to give favorable attributes to the food. Additives are the substances which are of little or no nutritive value but are added to food to enhance its flavour, appearance or other favourable quality. They are used in the processing or storage of foods especially in the developed countries includes antioxidants, food preservatives, colouring and flavouring agents etc. Food additives are substances added to food to preserve flavour or enhance its taste and appearance (Latiful Bari and Yeasmin 2018). Some additives have been used for centuries for example, preserving food by pickling with vinegar, salting, as with bacon, or using sulfur dioxide as in some wines. The use of food additives is not a modern-day invention; they have been used for centuries. The practice probably started when man first discovered that fire would cook and thereby preserve his meat. Later he realized that the addition of salt would preserve without cooking. Food preservation began when man first learned to safeguard food from one harvest to the next and by the salting and smoking of meat and fish. The Egyptians used colours and flavourings and the Romans used spices and colours for preservation and improving the appearance of foods. Thus, food additives have been used for centuries to enhance the variety of food products, to preserve, improve its taste and appearance, and provide a better mouth feel. Food additives afford us the convenience and enjoyment of a wide variety of appetizing, nutritious, fresh, and palatable food. Their quantities in food are small, yet their impact is great.

Introduction

The term pesticide refers to any chemical or mixture of chemicals intended for preventing, attracting, repelling, controlling or regulating a pest, including unwanted species of plants and animals during the production, shipment, transit, storage, processing or distribution of any food or agricultural commodity. The term includes compounds classified as insecticides, fungicides, herbicides, accaricides, rodenticides, plant growth regulators, sprouting inhibitors, chemosterilants, desiccants etc. The term excludes substances like animal drugs and food additives. Pesticides are chemicals used to destroy or control weeds, insects or other pests. The term pesticide residue refers to the remnants of the pesticide after weathering and it consists of the parent molecule and the degradation products which are toxicologically significant. In general, the pesticides, by virtue of their inherent toxic nature are recommended to be used as per Good Agricultural Practices (GAP) only. If GAP is not followed, contamination of the produce with the residues may pose significant health risk to consumers, non target organisms, biota and environment as a whole. When a pesticide is used for pest control purposes, they may reside in the form of metabolites.

Pesticide residues occur as the leftover of any pesticide after its application for pest control and it includes the parent compound and its toxic metabolites. Pesticide residue analysis may be defined as qualitative and quantitative analysis of samples drawn from agricultural field, market and environment for pesticides and toxic metabolites. Pesticide residues are invariably present in micro – quantities and generally estimated at ppm/ ppb levels. After application of the diluted spray solution, they are present at sub microgram levels in the substrate and hence their estimation at ppm or ppb levels is very cumbersome and need to be performed with utmost care. Moreover, the residue data generated should be accurate, reliable and reproducible. The level of residue in any edible commodity has to be below their prescribed maximum residue limits (MRL) value for market acceptance and below maximum permissible intake (MPI) for safety to consumers. Pesticide residue data are mainly utilised by regulatory authorities for estimation of MRLs and for assessing impact on human health and environment, particularly their adverse effect on non-target organisms. The detection of the pesticide residues must be confirmed beyond doubt and confirmation by GC-MS/MS or LC-MS/MS is generally acceptable. Since pesticide residues include parent compounds, isomers and toxic metabolites, appropriate methods of detection should be selected so that all the components are measured separately. Environmental samples/ market usually contain residues of large number of pesticides, for which multi residue methods are required for estimation/screening of such samples.

Introduction

Fruit and vegetable development starts with formation of an edible part fruit setting, seedling emergence, tuber development and ends with loss of edible character, or spoilage through physiological deterioration, development of fibrous character or spoilage through microbiological intervention . The state of maturity of a fresh horticultural commodity is therefore is a continuum process along the development scale. The term mature implies that point in the development scale when the horticultural commodity in the state that is ready to use (consume, process, store). For the packing house, maturity means suitability for storage followed by sufficient shelf life to assure profitable supply to markets. On the other hand, the retail consumer may value colour, flavour, or textural attributes. This implies that maturity and an appropriate compromise must be achieved through the marketing process.

Quality, on the other hand, relates to the degree of the satisfaction that the consumer or customer is likely to obtain through the use of mature commodity. Maturity and quality are interrelated with market expectations or requirements. These expectations or requirements are expressed through regulations or guidelines of grower groups or through legislative authority expressed as quality standards or grades and enforced through inspection agencies associated with government departments.

Introduction

Fruits and vegetables (F&V) are good sources of phytochemicals like carotenoids, phenolics, dietary fibers, minerals and vitamins and are considered as important components of a healthy diet. These bioactive compounds in fresh F&V have been linked to delay in onset of many diseases including cardiovascular, chronic and other non-communicable diseases. WHO reported an approximate 3.9 million deaths all over the world in 2017 due to insufficient consumption of F&V (WHO, 2019). Hence, health advisors and nutritionists recommend inclusion of fresh fruits and vegetables to complement the daily diet, and WHO recommends the consumption of a minimum of 400g F&V daily in five portions. However, beneficial raw F&V may contain pathogenic microorganisms, such as Salmonella, E. coli, and Listeria that can pose threat to consumer safety. Since fruits and some of the vegetables are eaten raw, there are chances that pathogenic microorganisms may also enter food chain. Nearly a half of food borne illnesses in United States are caused by microbes on fresh produce (CDC, 2019). The F&V are handled by producers, dealers, wholesalers, retailers and several intermediaries, and therefore, are at greater risk of possible contamination till it reaches the consumer.

The ever increasing demand for F&V has led to overexploitation of pesticides usage in the farms, leading to harmful pesticide residues in air, soil, water and on the F&V surfaces. Thus, it is imperative to maintain the quality and safety of F&V all through the supply chain. In this chapter, we discuss various pre and postharvest factors affecting the quality and safety of F&V, storage techniques to extend shelf life and reduce the safety threat as well as methods available for microbial and pesticide decontamination of fresh F&V.

Introduction

Biological, physical, chemical and other hazards associated with food have been detailed in Chapter 4. This chapter would address the risks associated with these hazards as well the scientific approach is assessing them. Risk analysis is an inevitable platform for food safety assurance which measures the impact of hazards on the health of consumers. To improve public health and maintain consumer trust in the food supply and to provide a sound regulatory foundation for national and international trade in food, an efficient food safety management system is essential. Therefore, World Trade Organization (WTO) developed food regulations governing international trade in foods based on science and risk assessment. A sound knowledge of food hazards and risks they pose to consumers, along with the capacity to take appropriate interventions, deserve top priority of a responsible authority and industry.

Risk

The word ‘risk’ is used to describe a situation that involves a possibility of something undesired to happen (Rowe, 1977). In food processing, hazards are considered as risks. Hazards are often thought of as synonyms of risks, however, hazards are quite different from risks.

A food borne hazard is defined by Codex as “a biological, chemical or physical agent in or condition of food, with the potential to cause an adverse health effect”. A risk is the chance, low or high, that any hazard will actually cause harm. Some of the emerging food hazards that must be assessed and managed are listed in table 1. Assessment and management of risks posed by these hazards is the responsibility to be urgently addressed by the scientific community.

Introduction

Food Safety is the assurance that food is acceptable for human consumption according to its intended use. The slogan of the World Food Safety Day 2019 “If it’s not safe - it’s not food!” portray, unsafe food is a threat to mankind. Ensuring food safety to protect public health and promote economic development is of utmost importance and it remains a significant challenge in both developing and developed countries. Food borne diseases remain a real and formidable problem, causing great human sufferings and significant economic losses. According to WHO 2019-20 World Water Day report, one third of the population of developed countries may be affected by food-borne diseases each year and the problem is likely to be even more wide spread in developing countries, where food and water borne diarrhoeal diseases kill an estimated 2.2 million people each year, mostly children. While unacceptable rates of food borne illness still remain, new hazards continue to enter the food supply.

A food safety hazard refers to any agent with the potential to cause adverse health consequences for consumers. It occurs when food is exposed to hazardous agents which result in contamination of food. In other terms it can be defined as anything that could contaminate food or could otherwise violate established food safety program criteria, if left uncontrolled. The National Advisory Committee on Microbiological Criteria for Foods (NACMCF, 1997) defined a hazard as a “biological, chemical, or physical agent that is reasonably likely to cause illness or injury in the absence of its control”.

A hazard may be introduced into the food supply any time during harvesting, formulation and processing, packaging and labelling, transportation, storage, preparation and serving. Food safety hazards are generally categorized into four classes: Physical, chemical, biological and allergens. Food manufacturers can adopt Food Safety Management Systems (FSMS), which include Good Manufacturing Practices (GMP), Good Hygiene Practices (GHP), Hazard Analysis and Critical Control Point (HACCP) and other practices to strictly check the hazards and make the food safe.

Understanding the hazards that contribute to food borne illness and injury is important to determine the necessary steps to prevent or reduce it to an acceptable level or eliminate hazards altogether before food reaches the consumer.

Introduction

Food is a resource of vital importance and its safety in the whole chain, from producer to consumer, is a worldwide concern. In fact, as food trade expands throughout the world, food safety has become a shared concern among all consumers. This issue began to be taken seriously at a period where there is a significant increase of illness caused by infected food in both developed and developing countries. Unsafe food contains hazardous agents or contaminants that can make people sick, immediately or by increasing their risk of chronic disease. Contaminants can enter food at many different points in the food production process, and can occur naturally or as the result of poor or inadequate production practices. International competitiveness depends more on quality and safety concerns than on prices. Governments and local authorities intervene in the market place in setting technical regulations; and sanitary and phytosanitary measures. This encouraged food processing companies around the world to implement food safety management systems which guarantees the production and distribution of safe foods. Prerequisite Programs (PRPs) are considered as the integral part of food safety standards and audit schemes all over the world. It is essential to implement food safety programmes in every company to check the chances of illness or injury due to unsafe food.