eChapters

Abstract

The increasing interest in polyphenolic compounds in industries has led to the exploration and exploitation of rich bio-compounds from natural sources, essentially plants and their by-products. Solid-liquid extraction is mostly applied for the recovery of these valuable compounds from plants. Since the extraction process is often difficult in a fresh matrix, a drying operation is needed to reduce the moisture content, and preserve the targeted valuable compounds. An uncontrolled drying operation will lead to product damage and hence, loss in quality, reason why, several studies have been carried out to understand and control the drying process. The present chapter aims to present some data on drying for bioactive compound recovery from plants and their by-products, mainly polyphenolic compounds. Our main interest is the mathematical tools used to model the drying process.

Abstract

There are several empirical models to describe deep bed drying dividing the domain into many thin layers. Empirical equations are seen as a resource that only serves to describe the thin layer drying kinetics of an agricultural product. Normally an empirical model is used to determine drying rate. The validity of following thin-layer drying models are accounted by coefficient of correlation (R2), standard error of estimated (SEE), root mean square error (RMSE). The properties of dried foods vary substantially depending upon the type of product, moisture content, drying type and ultimately drying conditions. To take care all above variables, a promising approach is to use Artificial Neural Network (ANN). In process control, the main objectives are food safety, high quality and yield at minimal costs. To obtain high quality products, on-line control techniques are required. Most food processes are highly nonlinear, with time varying dynamics, which complicates food automation. However, the recent developments in artificial intelligence based advanced control tools such as ANN to food processing have opened up novel possibilities for processing industries.

Abstract

Tremendous hike inworld population has increased thrust on the limited resources which has considerably affected the viability of the food. The emerging challenge for policy makers and food scientists is to put forward viable solutions. Utilization of underutilized crops/plants that act as good sources of starch could be explored in a better way for the sustenance of the limited sources like food crops/plants. The demand for starch and the foods containing starch has been increasing continually. Since, the starch in its native form has certain limitations in its functional properties to be used for different applications. Therefore, it becomes important to explore certain technologies which could be used for modification of starch. Among different technologies gamma irradiation ensures food safety while inducing physicochemical changes of the components. Although, the chemical modifications have been used widely so far but the concerns related to the chemical residues left are diminishing their demand. Hence, the physical processes particularly the gamma irradiation process has emerged as an efficient alternative with some benefits over other process like eco-friendly, economical, reliable and safe for altering the physico-chemical and biological characteristics of the product. Gamma Irradiation of starch has been successfully employed for the achievement of some desired physico-chemical, biological and functional properties of the foods and other related items. In this chapter, valuable impact of gamma irradiation on the physico-chemical, biological and functional properties of starch has been summarized.

Introduction

Improvement of wheat grain quality depends on the knowledge of quality requirements of different end-use products and the genetic components controlling different quality traits. In previous chapters we have dealt in-depth with quality requirements of different end-use products and their genetic components. Depending upon the goal of quality improvement, different strategies are adopted to improve wheat quality. It depends upon the number of genes controlling the traits as well as the availability of the simple methods for phenotyping the traits especially during early segregating generations. In addition stability analysis of the traits across the environments is essential before we go for breeding. Constraints in time, cost, and sample availability usually necessitate the use of predictive tests during early generations, followed by milling and baking tests on advanced lines that have met a number of agronomic, disease and predictive quality criteria. Knowledge of germplasm lines having specific quality traits is needed to initiate breeding for the improvement of wheat grain quality for different end-use products. The quality requirements of different major end-use products are provided in the following table (Table 1).

Hydrates carbons (saccharides) found in nature (animals and plants) are classified into three groups based on the number of monosaccharides found or released upon acid hydrolysis. Monosaccharides the groups of carbohydrates.
3.1 Formulation of Monosaccharides
The molecular formula of any monosaccharide (mono=one and saccharide=sugar) is Cn(H2O)n or (CH2O)n. Rhamnose and Deoxyribose are exceptions to the general formula of carbohydrates. Acetic acid (C2H4O2) and formaldehyde (CH2O) are not carbohydrates but have the formula Cn(H2O)n or (CH2O)n. Fitting and Baeyer proposed the formula CHO-(CHOH)4-CH2OH, which indicates the presence of aldehyde and five hydroxyl groups.
More than one monosaccharide molecule unites to form disaccharides, oligosaccharides, and polysaccharides. Monosaccharides, being simpler units, cannot be broken down further. Generally, they have two to ten carbon atoms per molecule (dioses to decoses). The monosaccharides may have either aldehyde or ketone groups. The one possible aldodiose (CH2OH.CHO) is glycolaldehyde (2-hydroxyethanal), but ketodiose is not possible since there are only two carbons. The glucose molecular formula C6H12O6 represents the number of C, H, and O atoms but not groups. However, the proposed formula, CHO-(CHOH)4-CH2OH, indicates the presence of an aldehyde and five hydroxyl groups. These simple sugars or monosaccharides have carbon backbones linked by single bonds with hydrogen and hydroxyl groups attached in an unbranched manner.

Life forms are composed of one of two basic cell types : Eukaryotic or Prokaryotic. Generally, eukaryotic cells are larger and more complex than the prokaryotic cells and possess a membrane-enclosed nucleus; eukaryotic means ‘true nucleus’ (eu=true; karyon = nucleus). All plants, animals, fungi, protozoa and algae are composed of eukaryotic cells. Only the microorganisms classes as bacteria and the archaea are prokaryotic cells. Prokaryotic cells have no nuclear membrane and therefore lack a true nucleus. The latin prefix pro means ‘early’ and in this instance suggests the somewhat primitive nuclear structure found in bacterial cells. Eukaryotic microorganism are sometimes simply referred to as eukaryotes, and the prokaryotic microbes as prokaryotes.

Abstract

Multiflash drying (MFD) process is based on the application of multiple cycles of heatingvacuum pulse to a solid food. Heat can be provided by convection (from hot air), conduction (by contact with a hot surface), microwaves, or by a combination of these methods. Due to the moderate temperatures applied to the drying food, and the sudden decompression step (vacuum pulse), MFD processes allow obtaining crispyanddried foods with very good nutritional and sensory properties. Vacuum pulses cause food texturization, which depends on the pressure drop rate during decompression. In fact, the dried products are similar to freezedried foods, but with more open structures, which result in higher crispness. The dehydration can be performed in relatively short processing times, when compared with traditional drying processes (e.g. solar drying, airdrying, vacuum drying and freezedrying). The short process time indicates clearly that this class of drying process presents a huge potential to the production of driedandcrisp foods at industrial scale.

Abstract

Mycotoxins are naturally occurring chemicals produced by fungi growing on grain, feed or food. The fungi that produce mycotoxins in grains commonly include Fusarium, Aspergillus and Penicillium species. The toxins can accumulate in maturing corns, cereals, soybeans, sorghum, peanuts and other food and feed crops in the field and in grain during transportation. The toxins may occur in storage under conditions favorable for the growth of the toxin producing fungi. Diseases in animals and human beings resulting from the consumption of mycotoxins are called Mycotoxicoses. These fungal metabolites are detrimental to the health of both animals and human. Toxicity ranges from acute death to chronic diseases, cancer and reproductive malfunction. Mycotoxin contamination of food and feed grains is a serious economic problem for grain producers and processors because grain contamination impacts market 

Introduction

Off late our understanding of the composition and functions of the human gut microbiota has increased exponentially and there is a great interest in producing healthy foods in particular that which have an impact in improving the gastrointestinal health such as probiotics, prebiotics and synbiotics. Many of these functional foods are dairy based and have been accepted greatly worldwide. Nonertheless, there has been a need for the development of nondairy probiotic, prebiotic and synbiotic products (Salmeron 2017). This has prompted food scientists and food industrialists to study the feasibility of applying other fermenting substrates such as cereals for the development of innovative nondairy fermented functional foods. The importance of including nanoscience and nanotechnology techniques for the creation of fermented cereal beverages that contain specific bioactive nanoparticles and their role in food packaging systems will be discussed.

Introduction

The gut microbiota is the complex and dynamic community of microorganisms that includes various bacteria, fungi and other microorganisms, proliferate and lead a symbiotic/mutual relationship with the host system. These microorganisms protect the host against pathogens by unique mechanisms, helps to maintain shape and strengthen the intestinal epithelium and boost immune response. Diverse bacterial metabolites can immigrate the host bloodstream and other parts of the body via various channels in humans and animals, such as gut-microbiota-brain, gut microbiota-skin, gut-vagina, gut liver, gut-bones etc. However, many aspects of modern lifestyle would alter the gut microbiota and lead to numerous diseases including inflammatory bowel disease, diabetes mellitus, obesity, and metabolic syndrome. Probiotics and other beneficial microbes exert many beneficial effects on their hosts by modulating the gut microbiota. While the term probiotic is reserved only for well-characterised strains with clinically proven health benefits, other beneficial microorganisms include, organisms responsible for the fermentation of foods viz. yogurt, kefir, kombucha, kimchi and many others that have been shown to have distinct health benefits. Interestingly, major group of these beneficial organisms belong to lactic acid bacteria.

Abstract
 
Technological advancement, increased urbanization, awareness and interest of consumer for variety products have given a great challenge to the food sector to develop inexpensive foods that are nutritionally superior and acceptable to the intended consumers. Keeping this objective in view, we have made an attempt to develop technology for variety products from wheat and corn and suitability of available varieties judged. With the emerging trends of food market towards fast foods, there are vast prospects for efficient utilization of cereals by exploring varieties products. A steamed bread (a Chinese traditional product) and Tortilla and corn chips (Mexican snacks) were developed. Steamed bread is defined as the product resulting from cooking or steaming fermented dough. Recipe and method for its preparation was standardized. Nutritionally rich steamed bread can be prepared by supplementing 10% level of chickpea and defatted soybean flour. Corn snacks have become a prime target of some consumer advocates and nutritionists who have referred them as a source of ‘empty calories’. But reality is that these snacks provide instant energy, as they are rich storehouse of nutrients. Process and recipe for the preparation of Tortilla and corn chips from Indian maize were standardized. The quality and acceptability of these snacks were worked out and found that these products were highly acceptable. Indian consumers have versatile taste, so these products will be readily accepted in Indian market. 

Noise has become a very important “stress factor” in the environment of man especially with regard to health. However, not much attention is being paid towards its elimination or control in dairy plants. The harmful effects of noise(s) in the workplace as an occupational hazard is really a cause of great concern. Apart from reducing the work efficiency, in the long run it causes serious auditory and non-auditory effects on the worker. Thus, it becomes imperative to set legal standards in workplaces to be monitored constantly to avoid or reduce the health hazards of the workers.

Noise and Noise Pollution

Noise is often defined as “Unwanted Sound” or “Undesirable Sound”. The “Noise Pollution” has been coined to signify the vast cacophony of sounds that are being produced in the modern life, leading to health hazards.

Abstract

Ghee means the pure clarified fat derived solely from milk or curd or from desi (cooking) butter or from cream to which no coloring matter or preservative has been added. It is the second largest dairy product prepared from milk and it is almost 35% of total milk production. Unfortunately, the producers or the middle- men involved in the ghee trade, tend to adulterate ghee with cheaper oils and fats like vegetable oils, animal body fats, hydrogenated fats and sometimes even the non-edible mineral oils, especially during lean season to earn more money. Recently, the problem of adulteration has assumed a very serious dimension. Such a situation has tarnished the image of dairy industry. Methods presently adopted by food law enforcing agencies to ensure the quality of ghee are mainly based on the physico- chemical constants, but all these methods have some limitations. So researchers are always in search of different innovative methods to check the quality of ghee.

Abstract

Probiosis has emerged in the early 20^th century after Ellie Metchnikoff proposed his hypothesis that organisms were reponsible for longivity of ethnic people of Balkan region of Russia and ever since it has grow into a major scientific field which has its applications extending into farming, aquaculture and prophylactics in humans. Vast research was carried out on this topic and Lactobacillus sp. and Bifidobacterium sp, are the two important genus that are highly studied and widely recognized universally as conventional probiotics. Apart from these two genus there exists many other bacterial species which have shown promising probiotic potential. Such non conventional probiotics are widely used in some parts of world as commercial food products with health beneficial effects, pharmaceutical products or being tested for their safe utilization in human beings. The present chapter tries to covers some genera and their potential and application in prophylactics.

Introduction

For the year 2016-17, as per the FAO global estimate, the food grain production has crossed over 2.6 trillion metric tons, while the steadily increasing the demand is anticipated to be approximately 3.3 trillion metric tons for 2016-17. Similarly,the global production of all horticultural commodities has crossed over 1.8 trillion metric tons. The global trade of these commodities is purely based on their quality, the demand for good quality produces increases day by day. The term “quality” is a broad terminology used to explain many parameters and differs from commodity to commodity. Usually, the term ‘quality’ is classified into internal and external quality. The external quality refers the external colour, size, shape appearance, uniformity, external damage, cracks and bruishness etc. These parameters may be common for both perishables and durables.

But, in case of internal quality, each and every parameter vary from commodity to commodity, product to product. For food grains, the internal quality refers to moisture content and other nutritional parameters like carbohydrate, protein content etc. But in fruits, the internal quality refers to internal pulp colour, TSS, pH, acidity, juice content, ripeness, other biochemical and nutritional quality parameters. 

Milk fermentation is process by which a change is produced in milk through the activity of microorganism. As milk leaves the udder it serves as a medium for the growth of many species and accordingly undergoes a series of changes, the processes producing these changes constitute the milk fermentation.

Fermentation of organic compounds, especially in the lack of oxygen leads to the rapid break-down of ‘biopolymers’ to produce ‘anaerobic food chains’.

Introduction

The nucleic acids are the molecular depots that are responsible for continuity of life by transfer of hereditary information from one generation to next. The sequence of nitrogenous bases containing programmed instruction determines the structure of every cell constituent and eventually every protein. In 1869, Friedrich Miescher, Swiss chemist, isolated an unknown phosphate-rich substance from pus cells named as nuclein, which was quite different from other organic substances like carbohydrate, protein, and fat. Altmann in 1899 ascertained that the nuclein also had some acidic characteristics and changed its name to ‘nucleic acid’. Later, nucleic acid was also isolated from salmon sperm nuclei as DNA-protaminecomplex. In 1953, James D.Watson and Francis H.C. Crick constructed the model of three-dimensional double helix structure of the DNA molecule which could successfully explain DNA replication.

Introduction

Nutrition is the fundamental pillar of life and an essential foundation of human and national development. Rightfrom the earliest stage of human development, the fetal stage, at birth, infancy, childhood, adolescence, adulthood and old age, nutrition forms the basis for survival, performance, mental and physical development & economic and social development.Nutritional deficiencies during pregnancy, fetal and early postnatal life can have a negative impact not only on the subsequent growth and development but can also lead to changes in metabolic regulation and homeostasis.

The exploration of facts about healthy and nutritious food has increased over the years. The advent of advance scientific tools has elucidated facts regarding the role of diet or nutrients in regulating gene expression (Sales et al., 2014). Various studies based on molecular interactions in food has revealed that many dietary components such as proteins, carbohydrates, fats, minerals, vitamins and phyto-constituents has the tendency to regulate gene expression.

Abstract

Nutrition and genetics both have very crucial role in human health and in development of chronic diseases such as cancer, osteoporosis, diabetes and cardiovascular diseases. Difference between individuals in response to dietary intervention is a well-known phenomenon in nutrition research (Ordovas, 2008).The effect of dietary changes on phenotypes such as blood cholesterol, body weight and blood pressure can differ significantly between individuals (Ordovas et al., 2007). Various bioprocess i.e. ingestion, absorption, digestion, transport, metabolism and excretion of nutrients and food bioactive components in human body is carried out through proteins such as enzymes, receptors, transporters, ion channels and hormones. Genetic variation leads to altered production and affect functional properties of these proteins. Furthermore nutritional efficacy is also different among different individuals which might be affected by nutritional status. Thus diet and gene expression are interrelated and have a mutual effect on physiology of human body.

Introduction

The dairy farmers mostly keep cows (indigenous and crossbred) along with few buffaloes for milk production. However, the genetic potential of the dairy animals is exploited fully, when they are fed with well balanced ration. Further, as feed cost is around 75% of the total cost of production, the success of the dairy farming depends not only on the quality of the ration, but also on the economy of the ration. Therefore, knowledge on the feeds and feeding of dairy animals is highly essential.

What is Feed?

Feed may be defined as supplementation of nutrients for development, maintenance and operation of day to day activities by animals.

Introduction

In the recent past there has been a great deal of questioning regarding role of milk fat in cholesterol metabolism and other body functions. The enormous wave against cholesterol containing foods has damaged the image and market growth of fat rich dairy products. This trend is due to presence of saturated fats and cholesterol that are known to increase the incidence of coronary heart diseases one of the common cause of heart attack. The educated and urban society is more health conscious about the presence of cholesterol in their diets. This has led to the greater demand of cholesterol free foods. Ghee being a saturated fat and containing little amount of cholesterol, is suspected to contribute towards coronary heart diseases. However, critically surveyed scientific literature indicates that there is no evidence of any association of milk fat with increased risk of coronary heart diseases. Age old and proven Ayurvedic system of medicine has proved the usage of ghee to induce several beneficial effects on human health and used extensively for therapeutic purpose like in treatment of skin allergy, respiratory diseases, curative for ulcers and eye diseases. This suggest that ghee is a valuable form of dietary fat.

Introduction

Nutritional value of food stuff is defined by its ability to provide nutrients required by the body. Proteins, carbohydrates, fats, minerals and vitamins are main ingredients in food stuffs. Wheat is an important source of these nutrients. The distribution of nutrients within wheat kernel is typical of many cereals. Nutrients are generally found in the highest concentrations in the germ or embryo and in the aleurone cells surrounding the starchy endosperm followed by bran, whole wheat flour and white flour in decreasing order. Of special importance is that it contains the entire B complex, except for vitamin B12. B vitamins function as cofactors in many metabolic reactions involved in the release of energy. The germ, which includes the scutellum, is especially rich in vitamins B and E, high quality protein, unsaturated fats, minerals, and carbohydrates. The bran consists mostly of the insoluble carbohydrate cellulose, and contains incomplete protein, traces of B vitamins, and minerals including zinc and iron. The endosperm is the largest part of the grain, and consists mostly of the carbohydrate starch, incomplete protein, and trace amounts of vitamins and minerals. Significant variations in the content of grains occur because of variety, crop year, area, fertilizer, and soil type.

Milk: Composition, Nutritional Role, & Importance for Human Health Introduction
Milk is one of nature’s most complete and balanced foods, offering a rich source of essential nutrients such as proteins, fats, carbohydrates, vitamins, and minerals in forms that are easily digested and assimilated by the body. It serves as a cornerstone of human nutrition, providing critical support for growth, bone strength, and overall health. Known as the nectar of life, milk not only sustains life but also enhances immunity, forming the first bond between mother and infant.
An adequate intake of calcium, particularly during childhood, is critical for bone development and preventing osteoporosis in later life. Rich in calcium, phosphorus, and vitamin D, milk is vital for maintaining strong bones and teeth while preventing osteoporosis. Its high-quality proteins support muscle growthand recovery, while lactose and fats provide both immediate and sustained energy. Micronutrients like zinc, selenium, and whey proteins strengthen the immune system, and its high water content makes milk an excellent source of hydration. These qualities make it a protective food for all age groups, from infants to the elderly.
While milk naturally lacks iron and has low levels of vitamin D, fortification with additional nutrients enhances its nutritional profile, making it even more beneficial. Fortified milk helps address deficiencies, supports bone health, and boosts immunity, making it an ideal dietary option for diverse populations. For infants and children, milk is a near-perfect food, and for adults, it serves as an excellent dietary supplement, particularly for its calcium, protein, and vitamin content. Beyond its nutritional benefits, milk plays a significant role in culinary traditions and cultural practices across the globe.

“Tell me what you eat and I will tell you what you are. The destiny of people depends on the nature of its diet.”

A. Brillat-Savarin

Milk is the only product which is considered nature’s almost perfect food. It is treasure house of unlimited nutrients. It is considered best and ideal food by virtue of possessing almost all the nutritional factors, viz., fats, proteins, carbohydrates, minerals and vitamins. They are not only of higher quality but are present in milk in such form and proportion that their digestion and assimilation in the body is very efficient. Milk also plays a supplementary role in our nutrition. If it is included in our diet it enhances digestion and assimilation of nutrients of other food products. This is the reason that it is kept in high esteem as a food and is called the nectar for living beings.

Milk is the first taste of food for whole mankind. It establishes the mother-infant bond and is a life promoter. Of the many fluids that biology offers milk is perhaps the most versatile in terms of its use– as food, as a growth stimulant and as a defense package to the user. To the infant mammal – be it a mouse, calf or a human child, mother’s milk is more than a source of energy and nutrients. It contains a wide variety of substances that defend the growing infant against infections.

Milk, a perfect blend of nutrition and palatability, plays an important role in preserving mental and physical health. Milk has long been recognized as the most wholesome and complete single food available in nature for health and as a medicine, both preventive as well as curative. Ancient chronicles as recorded in the Upnishads, Puranas and Vedas extol the beneficial and therapeutic properties of milk and milk products. It has been stated that cow milk, dahi and ghee impart knowledge and radiance, cure heart trouble and anaemia besides other bodily diseases.

Oligosaccharides comprise 2 to 10 units of monosaccharide molecules, which are released upon hydrolysis. The oligosaccharides are classified depending upon the number of monosaccharide units, e.g., Disaccharides (two monosaccharide units), Trisaccharides (three monosaccharide units), Tetrasaccharides (four monosaccharide units). Disaccharides are the most common oligosaccharides found in nature.
4.1 Disaccharides
Disaccharides are formed when glycosidic linkages covalently bond two monosaccharides together. A glycosidic bond is formed when the hydroxyl group on one of the sugars reacts with the monomeric carbon on the second sugar. A glycosidic bond can be alpha or beta, depending on the steric configuration at carbon one on the monosaccharide unit. During the union of two monosaccharide units, water molecules are eliminated (dehydration reaction or condensation reaction, or dehydration synthesis), and the formation of a glycosidic bond occurs, through which the units are linked via an oxygen bridge.

A boiler is a sealed vessel designed to heat water or other liquids, producing steam or vapor for various applications, including heating, power generation, cooking, and industrial processes. The operation of a boiler is similar to that of a pressure cooker but on a larger scale. The steam or vapor generated is used for domestic or industrial purposes, with the system usually involves involving combustion products that heat the water. Boilers come in various types, tailored for specific uses. While domestic boilers are compact and suited for household needs, industrial boilers play an important role in production processes, often operating on a much larger scale. These industrial boilers can be environmentally friendly when powered by natural gas or other low-emission fuels, helping industries reduce harmful emissions while maintaining performance. Industrial boilers have been a part of various sectors for centuries, with applications ranging from steam-powered locomotives to power plants. Their primary benefit lies in their energy efficiency and capacity to generate significant heat, supporting industrial operations. Whether in cooking or running manufacturing plants, heat plays a central role in daily life, and boilers provide a reliable means of delivering it efficiently. In industries, the use of industrial boilers helps reduce dependency on costly electric energy. As electricity can be expensive on a large scale, boilers allow manufacturers to lower operational costs. Additionally, industrial boilers require less management and minimize dependence on electricity, making them an economical and efficient option for industries.

OVERVIEW OF CANNING MACHINERIES
Canning is a food preservation method where selected raw materials are prepared, packed into containers such as tin, glass, or plastic jars, and sealed airtight. The contents are then heated to a sufficient temperature to destroy spoilage and pathogenic agents within the container, followed by rapid cooling to prevent overcooking. Canning extends the shelf life of foods, ranging typically from one to five years, with some products like freeze-dried lentils lasting up to 30 years.
Can Manufacturing Machinery and Equipment
• Can Body Reformer: Can bodies are often supplied collapsed to save space and ease transportation. The can body reformer shapes them into cylindrical forms, preparing them for further processing.
• Flanger: The cylindrical can bodies are flanged by the flanger, which has two flanging dyes. These dyes form grooves at the edges, preparing the cans for sealing.
• Seaming Machine: The seaming machine is used to close the open end of the can. It features a base plate to hold the can and an upper plate that presses the lid onto the can. The machine uses two seaming rollers (first and second) to seal the can tightly.
• Can Leakage Tester: After sealing, the cans are tested for leakage by immersion in water. If any leakage is detected due to improper sealing, it indicates that the can is faulty.
• Flange Rectifier: Cans that have been bent, deformed, or crushed during the flanging process are rectified using the flange rectifier machine, ensuring the cans are in proper shape for sealing.
• Can Coding Machine (Embossing Machine): This machine embosses codes on the cans, which include the product name, manufacturer details, and production date. It ensures proper identification and traceability of the product.c

The operation and maintenance of Dal Mills and Oil Mills are crucial components in ensuring the efficient processing of pulses and oilseeds. These mills play a significant role in the food processing industry, where the transformation of raw pulses and seeds into consumable products is vital for meeting the needs of consumers worldwide. The proper functioning of these mills requires a wellstructured operation strategy, which includes careful planning and execution of each process from raw material intake to the final product output. For Dal Mills, the primary operation involves cleaning, de-hulling, splitting, and polishing pulses, while for Oil Mills, the process revolves around seed cleaning, pressing, and extraction of oil from oilseeds like sunflower, soybean, and groundnut. Maintenance is a critical aspect of ensuring the smooth operation of these mills. Regular maintenance schedules, including inspection of machinery, replacement of worn-out parts, and calibration of equipment, help prevent costly breakdowns and extend the life of the machines. Preventive maintenance practices also contribute to the overall efficiency of the mill by minimizing downtime and optimizing energy consumption. Furthermore, the quality of the final product is closely tied to the condition of the milling machines. Proper maintenance ensures the production of high-quality dal and oil that meet industry standards and consumer expectations. The effective management of both operational processes and maintenance procedures is essential for the profitability and sustainability of Dal and Oil Mills. Skilled personnel, adherence to safety guidelines, and a proactive approach to troubleshooting and repairing equipment are key to achieving consistent output and high product quality. This chapter will delve into the specifics of the operation and maintenance practices required to run Dal Mills and Oil Mills efficiently, providing insights into best practices, challenges, and solutions that contribute to the overall success of these milling operations.

The operation and maintenance of dehusking, dehulling, degerming, and drying equipment are crucial in ensuring the efficiency and longevity of these machines in grain and seed processing industries. These machines play a vital role in removing husks, hulls, and germs from grains, as well as reducing moisture content to enhance storage stability. Proper handling and regular maintenance not only improve performance but also reduce downtime and operational costs. Dehuskers are used to remove the outer husk from grains like paddy and millet. Their efficiency depends on factors such as roller pressure, feed rate, and machine alignment. Routine maintenance involves checking for wear and tear on rollers, adjusting pressure settings, and ensuring that all moving parts are well-lubricated. Similarly, dehullers remove the outer shell of seeds and grains, requiring careful calibration to avoid excessive grain breakage. Blade sharpness, motor performance, and sieve integrity should be regularly inspected to ensure optimal functioning. Degermers are employed to separate the germ from the endosperm in grains like maize. This process enhances the shelf life of processed products and improves their quality. Regular maintenance of degermers involves inspecting the abrasion plates, checking the feed rate, and ensuring that airflow mechanisms are clear of obstructions. Any malfunction can lead to uneven separation, affecting the final product quality. Dryers are essential in reducing the moisture content of grains to prevent microbial growth and spoilage. They require proper temperature control, uniform airflow, and regular cleaning of heat exchangers and drying chambers. Overheating or under-drying can compromise the grain quality and lead to storage losses. Timely inspections of sensors, air ducts, and burner efficiency help maintain effective drying operations. A well-planned operation and maintenance routine ensures these machines function optimally, increasing productivity and product quality while reducing energy consumption and repair costs.

OPERATING MECHANISM OF A FLOUR MACHINE
The flour grinding machine operates using blade cutting, high-speed air impact, and a two-layer destruction function that integrates collision and particle sorting. The principle of operation involves the rotor generating high-speed airflow during blade cutting. As the material accelerates within the airflow, repeated impacts cause it to be destroyed in two layers simultaneously, enhancing the destruction rate. As airflow enters the classification chamber, the destruction process rotates at high speed, and the classification rotor generates centrifugal force. The viscous effect of the airflow creates centripetal force. When the centrifugal force on the particles exceeds the centripetal force, the coarse particles return to the destruction chamber, while fine particles are carried with the airflow to the powder collector for collection. There are three primary operating characteristics of the flour mill. First, the main shaft in the power system is sequentially equipped with bearing caps, radial ball bearings, bearing pads, and thrust ball bearings from top to bottom. Second, the grinding system consists of a spring, spring pad, inner grinding head, adjusting nut, and outer grinding head mounted on the spindle. Lastly, the separation system features a brush mounted on the spindle, with a tension spring above and an adjusting nut below the brush. The core principle of the flour grinding process is to reduce grains like wheat, corn, or rice into flour particles. Raw grains are introduced into the mill's hopper and then conveyed to the grinding chamber containing the grinding stones or rollers. As the grains pass through the chamber, the high-speed rotation of the stones or rollers generates friction that crushes, grinds, and pulverizes the grains into a coarse powder, which gradually becomes fine flour. Flour mills are equipped with adjustable settings to regulate the gap between the grinding stones or rollers, allowing for varying flour fineness. This ensures the production of flour suitable for different culinary needs, from coarse flours for rustic bread to fine flours for delicate pastries. The ground flour particles are then

Packaging machinery is integral to all packaging processes, from primary packaging to distribution packs. It encompasses various stages, including fabrication, cleaning, filling, sealing, combining, labeling, overwrapping, and palletizing.Food packaging refers to the methods, materials, and technologies used to package food items. It serves multiple purposes, such as prolonging the shelf life of products. However, food packaging is not a recent innovation, and its history is quite fascinating. Food packaging has existed in various forms throughout history. The Journal of Agricultural and Food Chemistry highlights that Napoleon played a major role in its development by offering a reward of 12,000 francs for anyone who could invent a method to preserve food for his army. This prize went unclaimed for 15 years until Nicholas Appert introduced the canning method. Appert’s process involved boiling food and sealing it in airtight glass containers, laying the foundation for modern canned food as we know it today.
EVOLUTION OF FOOD PACKAGING THROUGH AGES
The history of food packaging dates back centuries! The Chinese were pioneers in developing paper and wrapping materials, which were utilized for storing food. In ancient Egypt, advancements were made in glass-blowing and molding techniques, allowing glass to be shaped into various forms for food and water storage. Over time, innovations continued to evolve, with figures like Nicholas Appert leading the way. Appert's glass canning method eventually led to the creation of modern metal cans. In the 1880s, the food manufacturer Quaker Oats introduced cardboard cereal boxes as a packaging solution for their oats, further advancing food packaging technology.
Food packaging serves several vital functions beyond simply containing food. Here are Some Key Roles of Food Packaging:
• Preservation: Packaging prevents exposure to air and moisture, which can cause food to spoil quickly. Proper packaging extends the shelf life of food, benefiting manufacturers by reducing waste.

The upkeep of food processing equipment such as peelers, slicers, pulpers, and juicers are essential to ensure the smooth and efficient functioning of food production processes. These machines are commonly used in the food industry for preparing fruits, vegetables, and other raw materials by performing tasks such as peeling, slicing, pulping, and juicing. Proper operation of these machines enhances productivity, reduces processing time, and improves the consistency and quality of the end products. Efficient operation requires a comprehensive understanding of each equipment's mechanism and design, allowing operators to optimize the use of these machines while minimizing operational risks. For instance, peelers are designed to remove the skin of various fruits and vegetables without damaging the product, slicers are employed to cut products uniformly for further processing, pulpers are utilized to separate the pulp from seeds and skins, and juicers extract liquid from fruits and vegetables while retaining the flavor and nutritional content. However, ensuring smooth operation also depends on regular upkeeping practices. This includes routine inspections, lubrication, and cleaning to prevent wear and tear, mechanical failures, or contamination. Maintenance tasks also involve checking for malfunctions or parts that need replacement to avoid costly downtime. In addition, proper calibration and adjustment are crucial to ensuring the machines operate at their optimum efficiency and meet safety standards. Failure to maintain these machines can lead to inefficiencies, product defects, and even safety hazards. Therefore, understanding both the operational and maintenance procedures for peelers, slicers, pulpers, and juicers is critical for sustaining production standards, minimizing operational disruptions, and prolonging the life of the equipment.
PEELER
Peeling machines are very important in the food processing sector, providing efficient and accurate skin removal from various fruits and vegetables. These machines simplify the peeling procedure, ensuring that products meet strict standards for subsequent processing or packaging. This detailed guide focuses on the use of blade peeling machines, examining their features and uses in the food industry.

Rice milling machines are crucial in the rice production industry, as they are used to remove the husk and bran layers from paddy, resulting in polished white rice. Various types of rice milling machines, such as hullers, whitening machines, polishers, and graders, are available, each designed for a specific function in the milling process. When selecting a rice milling machine, it's essential to consider factors such as capacity, efficiency, power consumption, and maintenance requirements. Additionally, the machine’s size should be aligned with the scale of rice production operations. By investing in the right machinery, producers can enhance overall efficiency and product quality, while reducing manual labor and processing time.
OVERVIEW OF RICE MILL MACHINERY
Rice mills are food-processing facilities where raw paddy is converted into rice. These mills use modern machinery to process the paddy harvested from fields, transforming it into the final product, rice. Various types of rice mill machines are utilized throughout the milling process to ensure efficient and effective production.
Applications of Rice Mill Machinery
Milling is one of the key steps in the production of rice. It is generally performed post the production of rice. The paddy produced industrially cannot be consumed in its natural forms. This is why paddy is processed post its production, by the process of milling. It removed in order to make it fit for human consumption.
Variants of Rice Mills
There are many types of rice mills, each tailored to specific processing needs and production capacities. Below is a list of machines used in rice mills:
• Single-Pass Rice Mills: These machines are designed for simpler rice milling operations. They typically perform the essential tasks of husking and whitening in a single pass.
• Multi-Pass Rice Mills: Ideal for large-scale operations, multi-pass mills carry out multiple milling stages. These stages include cleaning, husking,

Introduction

The green revolution which initiated in India during 1960’s to 1980’s was an attempt to overcome the then prevailing threats of food scarcity and lack of foreign exchange. The food scarcity was a result of severe drought which engulfed the country as well as the political situation it had to face after its short period of gaining independence (Reddy, 2010). The only way out to overcome the acute food scarcity was intensive agriculture, with the use of high yielding varieties, chemical fertilisers and pesticides which heavily boosted agriculture production in India. The remarkable increase in production and productivity resulted in non-judicious use of chemical inputs to extract the maximum from the degrading soil. This marked the era of soil, water and air pollution and extreme health hazards to all life forms.

Rachel Carson’s “Silent spring” in 1962 was an insight into the path of DDT the then prevalent pesticide through its effect on the food chain as well as the environment. She was one among the scientists to raise her voice against the indiscriminate use of pesticides. The evident impacts raised concerns over the continued use of chemical inputs (Lairon, 2010). The situation warranted the reduced or limited use of chemicals in agriculture which resulted in an “organic movement”. This caused a slow, but evident shift in the interest of growers and consumers towards organic agriculture for health security, food safety, quality and better returns (Niggli et al., 2007).

This review is an attempt to analyse the various factors affecting the safety and quality of organic food products in comparison with conventional food. Drawing a proper conclusion was a difficult task due to the limited availability of scientific papers published in this aspect, indication of only trends rather than solid proofs and non-revelation of non-significant data regarding related experiments. However, this review could evaluate the positive and negative aspects of organic cultivation and food production from the available data, so as to suggest measures for improving the quality and safety of organic food products.

Abstract

Osmotic dehydration is gaining popularity due to several energy and product quality related advantages it offers. It has huge potential as a complementary process step prior to operations such as air-drying, microwave drying, freezing, frying etc, if not an alternative one, in the food process chain. It can be easily integrated with other processing steps in order to improve the overall efficiency of a given food process. Application of additional driving force either prior to or during osmotic dehydration can enhance the mass transfer rates in the osmotic dehydration. Role of mathematical modelling both in osmotic dehydration and rehydration have been discussed. Current limitations for the adaptation of osmotic dehydration in the food processing industry and possible solutions are also discussed in detail.

Overview of the Indian Dairy Sector

India’s dairy sector occupies a unique global and domestic position due to its scale and socio-economic impact. As the world’s largest producer of milk with 230.6 million tonnes of production in 2022-23 (BAHS, 2023), India contributes approximately 23% of global milk production, surpassing countries like the United States and New Zealand (FAO, 2020). This dominance is largely attributed to Operation Flood, the revolutionary initiative launched by National Dairy Development Board (NDDB) in the 1970s, which transformed India from a milk-deficient country to the world’s largest milk producer (World Bank, 1998). Operation flood is known for its contribution in increasing milk production, supplement rural income and make available reasonable prices to the consumers. This initiative laid the foundation for the cooperative model of dairy production, epitomized by the success of organizations like Amul, which became a global model for dairy development (Candler & Kumar, 1998).

Introduction

Lipids are among the major components of food of plant and animal origin (food lipid). There is no precise definition available for the term lipid; however, it always includes a broad category of compounds that have some common properties and compositional similarities. Lipids are materials that are sparingly soluble or insoluble in water, but soluble in selected organic solvents like benzene, chloroform, ether, hexane, and methanol. Together with carbohydrates and proteins, lipids constitute the principal structural components of tissues (Erwin Wsowicz et al., 2004). Lipid oxidation is one of the major reasons that foods deteriorate and is caused by the reaction of fats and oils with molecular oxygen resulting in off-flavours that are generally called rancidity. Exposure to light, pro-oxidants and elevated temperature will accelerate the reaction (Velasco, J et al., 2010). Rancidity is related to characteristic off-flavour and odour of the oil. There are two major causes of rancidity. One occurs when oil reacts with oxygen and is called oxidative rancidity (Ribeiro et. al., 1993). The other cause of rancidity is by a combination of enzymes and moisture. Enzymes like lipases liberate fatty acids from the triglyceride to make di and monoglycerides and free fatty acids and such liberation of free fatty acids is named hydrolysis. Hydrolysis is additionally caused by chemical process that’s prompted by factors like heat or presence of water. Rancidity caused by hydrolysis is called hydrolytic rancidity. Oxidation cares mainly with the unsaturated fatty acids. Oxidative rancidity is off interest because it results in the event of unfavourable off-flavours which will be detected early within the development of rancidity, more so than in the case of hydrolytic rancidity. Oxidation can alter the flavour and nutritional quality of foods and produce toxic compounds, all of which may make the foods less acceptable or unacceptable to consumers. Oxidation products typically include low relative molecular mass compounds that are volatile also as undesirable off-flavour compounds (Food lipids).

Packaging is a tool that is used to contain the product, protect the product from environmental hazards and help in marketing the product. Examples of ideal natural packaging systems are that of a banana, orange, coconut and egg, where the packaging is provided by nature. The major step forward in the food processing arena has been the ability to protect and preserve products with packaging and hence ensuring the availability of fresh and processed products out of season and over long distances in various forms. Milk is a highly perishable product and is not uniformly available round the year to the whole country due to geographical and genetic variations. If dairy products are to be available all the year round the country, irrespective of the season and area, it must be presented in packages that are convenient to purchase and use.

Packaging has additional responsibilities of providing convenience, safety and facilitating, besides handling, storage and distribution of products. It should prevent spoilage of food by microbial or insect attack. It also preserves the quality and nutritive value of many foods by the exclusion of oxygen and the control of moisture loss or gain. It increases the shelf-life and ensures longer availability and contributes to the product image through structural and graphic design. Product information is also given out through the medium of labeling, which acts as a tool for marketing and advertising.

Packaging means a coordinated system of preparation of goods for distribution, storage, merchandizing and shipment at optimum cost compatible with the requirements of the product. It also includes the art, science and technique used, preparatory to and during transportations and selling of goods and technical methods and work processes related to the above preparations.

The broad range of dairy products necessitates that packaging equipment and materials encompass nearly all types from flexible to rigid and from high to low barrier. The general types of packaging and equipment are discussed below with a focus on fluid products but it must be recognized that other dairy products such as cheese have their own particular packaging requirements and technologies.

Role of packaging in distribution and sale: The essence of what makes milk and dairy products important source of human nutrition also causes rapid deterioration and high perishability. The major role of dairy packaging is to retard the deterioration by preventing microbial recontamination and excessive chemical deterioration. Fluid products are especially susceptible to microbial, enzymatic and chemical degradation. In addition to retarding quality loss, packaging must provide containment, facilitate use, identify products, communicate, and appeal to consumers, all with maximum production efficiency. The large volumes and low unit value means that these functions must be met with minimal economic cost and environmental impact. Because food packaging is generally highly regulated, legal requirements must also be understood and met.

India’s bakery market at 49.5 billion tonnes makes it the third largest market in Asia Pacific, only after Japan and Australia. 72 The bakery industry in India comprises of organized and unorganized sectors. The organized sector consists of large, medium and small-scale manufacturers who produce packaged biscuits and bread. The unorganized sector consists of small bakery units, cottage and household type manufacturing their goods without much packaging and distributing their goods in the surrounding areas. Bread market is estimated to be growing at around 7% p.a. in volume terms, whereas the biscuit market has witnessed a higher growth at around 8–10%. Within the biscuit category, cream and specialty biscuits are growing at a faster rate of 20% p.a. The per-capita consumption of biscuits in India is around 900 gm as compared to 15–20 kg. for developed countries. The consumption of biscuits is equally divided between the urban and rural population. Demand for biscuits in 2003–2004 is likely to exceed 1.2 million tonnes.

Product Characteristics and Packaging Requirements:

The key raw materials for sugar confectionery are sugar (60 - 65%), glucose, citric acid and flavoured essences. Confectionery is hygroscopic in nature and requires protection against the ingress of moisture, and exposure to high temperature (as far as possible).

A candy or confectionery product may be adversely affected by many things. Hard candy, brittles and crunch products are most sensitive to moisture and absorb water vapour fairly rapidly from the atmosphere. Various gums are less sensitive while some creams tend to lose moisture considerably.

Packaging, hardening, storage, and shipping are essential final stages that protect ice cream quality after manufacturing. This chapter explains the role of packaging in protecting products from moisture loss, contamination, physical damage, and environmental exposure. It examines hardening technologies, including rapid-hardening systems, tunnels, spiral systems, and other industrial arrangements. The chapter also discusses bundling, shrink wrapping, palletizing, frozen storage, distribution models, and cold-chain requirements under Indian conditions. Temperature control throughout the distribution system is emphasized because fluctuations can cause recrystallization, texture deterioration, shrinkage, and other defects. The chapter provides practical guidance for maintaining product integrity from filling through storage and final delivery.

This process involves building up a coating of sugar and sometimes of other things, layer by layer. Panning is one of those processes that the confectionery and pharmaceutical industries have in common.

The coating of confectionery with sugar using a pan is very ancient. Originally, these products were made in an open pan suspended over a fire by chains. Apparently the operator swung the pan by hand, coating the product with sugar syrup which was then allowed to crystallise. The normal modern small-scale method is to use a rotating dragee pan (Fig.No.19.1).

These are elliptical vessels made traditionally of copper, but now more commonly of stainless steel. The pan is equipped to be rotated and usually there is a system for supplying and extracting air and possibly with a system for spraying in the sugar syrup. Typical pan sizes are between 1.5 and 0.9 m in diameter although smaller sizes are used for small-scale work.

Introduction

Military personnel’s are deployed for operation in adverse climatic conditions like desert, cold (arctic) and high altitude regions. Stressful and challenging living conditions have affected the outcome of many battles, campaigns and wars. Acclimatization to the environmental condition is a very essential stage of deployment. The time for acclimatization is restricted/limited for the effective operation towards the purpose of deployment. The performance of the military personnel in various deployed regions depends on the nutrition provided by the food consumed. The operational rations are designed to provide the essential nutrition to enhance their performance during training and/or operational situations.

Nutrition requirement of military personnel is different from that of the civilians. The nutrition requirement also varies with the kind (sedentary or continuous work) and region (plain, desert or high altitude) of deployment. The environmental stress caused by extreme heat, cold, etc. also influences the nutrient requirement/ intake. The insufficient dietary nutrient intake affects the immune function, pace of recovery from illness and injury and also the physical performance (Tharion et al., 2005).

The operational ration is also designed in such a way that it provides to the military personnel the required nutrition from the build in nutrition reserves during certain operational situations. Considering the vital criteria for nutritional requirement, the menu for the military personnel is designed. The chapter discusses the past, present and future of the army operational ration (AOR) in various countries of the world and the influence of advances in food processing methods in AOR menu.

What is Performance Appraisal?

Performance Appraisal (PA) is the process through which an individual employee’s behaviour and accomplishments for a fixed time period are measured and evaluated. The major purpose of measuring and evaluating is to assess the worth or value of an employee. Performance appraisal is a systematic and objective way of judging the relative worth or ability of an employee in performing his task. Performance appraisal helps to identify those who are performing their assigned tasks well and those who are not and the reasons for such performance.

The compliance with hygienic and aesthetic standards in the dairy factory is, in the final analysis, dependent on the human element. Each employee, from top management to the most junior operative, has his role in the factory sanitation programme and carelessness at any stage may cause quality deterioration of products or endanger the health of consumers. Legal action against the dairy may also result from neglect of hygiene. Personnel hygiene refers to the personal cleanliness and related habits of the workers. Milkborne infections frequently originate from food contaminated by workers through their hands, breath, hair, perspiration, pimples, infected wounds, coughs, and sneezes. Transfer of even traces of human and animal excreta by the workers is a potential source of pathogenic microorganisms. Foodborne illness is known to originate from workers who were ill and practiced unsanitary food handling methods or poor personal hygiene. Even the healthy worker, who does not exhibit the symptoms of the disease, may harbour food poisoning bacteria in the respiratory or intestinal tract. It is always desirable, as a matter of practice, to look at different parts of the human body in terms of potential sources of bacterial contamination. Provisions regarding personal hygiene of employees are contained in all legislation dealing with milk treatment.

Introduction

The term pesticide refers to any chemical or mixture of chemicals intended for preventing, attracting, repelling, controlling or regulating a pest, including unwanted species of plants and animals during the production, shipment, transit, storage, processing or distribution of any food or agricultural commodity. The term includes compounds classified as insecticides, fungicides, herbicides, accaricides, rodenticides, plant growth regulators, sprouting inhibitors, chemosterilants, desiccants etc. The term excludes substances like animal drugs and food additives. Pesticides are chemicals used to destroy or control weeds, insects or other pests. The term pesticide residue refers to the remnants of the pesticide after weathering and it consists of the parent molecule and the degradation products which are toxicologically significant. In general, the pesticides, by virtue of their inherent toxic nature are recommended to be used as per Good Agricultural Practices (GAP) only. If GAP is not followed, contamination of the produce with the residues may pose significant health risk to consumers, non target organisms, biota and environment as a whole. When a pesticide is used for pest control purposes, they may reside in the form of metabolites.

Pesticide residues occur as the leftover of any pesticide after its application for pest control and it includes the parent compound and its toxic metabolites. Pesticide residue analysis may be defined as qualitative and quantitative analysis of samples drawn from agricultural field, market and environment for pesticides and toxic metabolites. Pesticide residues are invariably present in micro – quantities and generally estimated at ppm/ ppb levels. After application of the diluted spray solution, they are present at sub microgram levels in the substrate and hence their estimation at ppm or ppb levels is very cumbersome and need to be performed with utmost care. Moreover, the residue data generated should be accurate, reliable and reproducible. The level of residue in any edible commodity has to be below their prescribed maximum residue limits (MRL) value for market acceptance and below maximum permissible intake (MPI) for safety to consumers. Pesticide residue data are mainly utilised by regulatory authorities for estimation of MRLs and for assessing impact on human health and environment, particularly their adverse effect on non-target organisms. The detection of the pesticide residues must be confirmed beyond doubt and confirmation by GC-MS/MS or LC-MS/MS is generally acceptable. Since pesticide residues include parent compounds, isomers and toxic metabolites, appropriate methods of detection should be selected so that all the components are measured separately. Environmental samples/ market usually contain residues of large number of pesticides, for which multi residue methods are required for estimation/screening of such samples.

Milk is a complex colloidal dispersion, the physical and physicochemical properties of which depend on intrinsic compositional and structural factors, extrinsic factors such as temperature, and post-milking treatment.

There is no clear dividing line between physical properties and physicochemical properties. However, physical properties may be thought of as the measure of the bulk behaviour of milk and of how milk interacts with energy, while physicochemical properties are measures of how bulk behaviour and energy interactions depend on the constituent colloidal particles, molecules, atoms and ions in milk.

Knowledge of physical properties is of importance particularly in the technological and engineering design and control of milk processes and processing equipment. Knowledge of physicochemical properties provides the basis for the design of modern methods of milk analysis, determination of milk microstructures and elucidation of the complex chemical reactions that occur in milk.

In the dairy industry measurements of the physical properties of milk and milk products are made to secure data necessary for the design of dairy equipment (e.g., heat conductivity and viscosity) to determine the concentration of a component (e.g., specific gravity to estimate solids-not-fat or freezing point to determine added water), or to assess the extent of a physical or chemical change (e.g., titratable acidity to follow bacterial action or viscosity to assess aggregation of protein micelles or fat globules). The great advantage of physical measurements for such purposes is their speed and simplicity as well as their potentialities for automation.

Use of physical property to measure concentrations or changes in degree of dispersion demands knowledge of the contribution of the several components to that property. Furthermore, the natural range of variation of the property in milks or products is of major interest. The precision and suitability of possible methods of measurement are also of prime importance.