eChapters

Abstract

Quinoa is a pseudo-cereal which belongs to family Chenopodiaceae. Quinoa can act as highly potential crop for areas where ecological conditions do not support other food crops because of its rusticity, tolerance to frost, salinity, drought and ability to grow in marginal soils. Recently, much attention is focused on quinoa for people with celiac disease and allergic to gluten. Quinoa contains high-quality protein, complete with all essential amino acids and is a good source of carbohydrates, lipids, vitamin C, vitamin E (natural antioxidants) and adequate amount of important micronutrients such as minerals. Carbohydrates of quinoa possess excellentfreeze-thaw stability and can be used as thickener in frozen foods.

Quinoa also consists of bioactive components such as phytosterols, squalene, fagopyritols and polyphenols which act as powerful anti-oxidants in-vitro and thus couldprevent degenerative diseases such as coronary heart disease, atherosclerosis and Alzheimer's disease. Fibre accounts for 6% of the grains total weight, and quinoa intake therefore promotes intestinal transit, regulates cholesterol, stimulates the development of beneficial bacterial flora and helps prevent colon cancer. The quinoa grain can be used to combat liver disease, angina and cystitis. The radical scavenging ability and Angiotensin I converting enzyme (ACE) inhibition activity of quinoa is higher than that of amaranth, rice and wheat. Recent studies have identified significant amounts of ecdysteroids, kaempferol, quercetin, two phytoestrogen - daidzein and cenistema in quinoa. Ethanolic extract of quinoa was observed to have Antioxidant and antihypertensive activity.

Abstract

The aim is to review the potential health benefits of minor millet. There is in need to identify newer sources of nutraceuticals and other natural and nutritional materials with the desirable functional characteristics. They are an important staple food in India for people of low income groups. Minor millet is rich in several nutrients as well as non-nutrients such as phenols. Nutritionally, its importance is well recognised because of its high content of calcium (0.38%), dietary fiber (18%) and phenolic compounds (0.3-3%). Minor millets, one of the cereals are known for several health benefits including its polyphenol and dietary fiber contents. Health beneficial effects include anti-diabetic, anti-tumerogenic, atherosclerogenic effects, antioxidant and antimicrobial properties. The energy of minor millets is greater than other cereals and nearly equal to that of brown rice because the lipid content is generally higher (3 to 6%). This review deals with the nature of polyphenols and dietary fiber of minor millets and their role with respect to the health benefits associated with millet.

Previous Year Questions

1. Discuss the iron and protein malnutrition in India. Describe the dietary pattern for mitigating the above-said malnutrition. (15M, IFoS-2022)

2. What is protein energy malnutrition? Give micronutrient deficiency in women and children. (20M, CSE 2017)

3. How are vitamins classified? Name the blood clotting vitamin. Give its various functions and sources. (10M, 150W, CSE 2019)

4. What do you mean by nutrient deficiency? Explain the micro-nutrient deficiency in context of work capacity of women and children. (12.5M, CSE 2015)

Abstract

Nutrition and genetics both have very crucial role in human health and in development of chronic diseases such as cancer, osteoporosis, diabetes and cardiovascular diseases. Difference between individuals in response to dietary intervention is a well-known phenomenon in nutrition research (Ordovas, 2008).The effect of dietary changes on phenotypes such as blood cholesterol, body weight and blood pressure can differ significantly between individuals (Ordovas et al., 2007). Various bioprocess i.e. ingestion, absorption, digestion, transport, metabolism and excretion of nutrients and food bioactive components in human body is carried out through proteins such as enzymes, receptors, transporters, ion channels and hormones. Genetic variation leads to altered production and affect functional properties of these proteins. Furthermore nutritional efficacy is also different among different individuals which might be affected by nutritional status. Thus diet and gene expression are interrelated and have a mutual effect on physiology of human body.

    1.    Nutrients : Chemical substances obtained from food and used in the body to provide energy, structural materials, and regulating agents to support growth, maintenance, and repair of the body’s tissues. Nutrients may also reduce the risks of some diseases.
    2.    Carbohydrate, fat, and protein are sometimes called macronutrients because the body requires them in relatively large amounts (many grams daily). In contrast, vitamins and minerals are micronutrients, required only in small amounts (milligrams or micrograms daily).
    3.    The international unit for measuring food energy is the joule, a measure of work energy. To convert kcalories to kilojoules, multiply by 4.2; to convert kilojoules to kcalories, multiply by 0.24.
    4.    Essential nutrients : Nutrients a person must obtain from food because the body cannot make them for itself in sufficient quantity to meet physiological needs; also called indispensable nutrients. About 40 nutrients are currently known to be essential for human beings. Energy-yielding nutrients: the nutrients that break down to yield energy the body can use:

Abstract

Due to rapidly increasing knowledge on nutrition and medicine, concepts about food and health has dramatically changed and resulted in consumption of nutraceuticals and natural plant foods.Use of nutritional therapy and phytotherapy have become progressively popular to improve health, and to prevent and treat diseases. Plants have long history of their uses as ingredients of human nutrition and folk medicine,because of availability of huge array of high-value components and multiple-activity bio-actives. “Licorice” means “sweet root” in Greek is a plant of ancient origin, indigenous to Southern Europe and Asia Minor. Most of the supply comes from former USSR, Spain, Turkey, Syria, Iraq and Afghanistan, with total production between 40,000 and 50,000 tonnes per annum. The chemical constituents of the roots include several bioactive compounds, such as glycyrrhizin (~16%), different sugars (up to 18%) ,flavonoids, saponoids,sterols, starches, amino acids, gums and essential oils. A large number of clinical and experimental studies reported its useful biological properties such as antioxidant, immunomodulatory, cardioprotective, anti-inflammatory, anti-viral and anticancer effects. It is useful in anaemia, gout, asthama,ulcers, sore throat, tonsillitis, diabetes, tuberculosis, flatulence, diarrhea, sexual debility, epilepsy, hyperdypsia, fever, coughs, skin diseases, eye diseases, swellings,constipation, rheumatism, acidity, leucorrhoea, bleeding, jaundice, hiccough, hoarseness, bronchitis.Recently, it is reported to have neurological properties such as antidepressant, anxiolytic, and anticonvulsant effects. The most abundant minerals present are calcium, sodium, phosphorus, potassium and iron. Licorice extracts and its principle component, glycyrrhizin, have extensive use in foods,as a natural sweetener and flavoring agent in beverage, confectionery, tobacco and pharmaceutical industry. It is in great demand globally as medicinal and nutritional supplement due to it's wide range of properties, which also indicates that in future the plant could serve as a “lead” for the development of novel agents having good efficacy in various disorders.

Introduction

In the recent past there has been a great deal of questioning regarding role of milk fat in cholesterol metabolism and other body functions. The enormous wave against cholesterol containing foods has damaged the image and market growth of fat rich dairy products. This trend is due to presence of saturated fats and cholesterol that are known to increase the incidence of coronary heart diseases one of the common cause of heart attack. The educated and urban society is more health conscious about the presence of cholesterol in their diets. This has led to the greater demand of cholesterol free foods. Ghee being a saturated fat and containing little amount of cholesterol, is suspected to contribute towards coronary heart diseases. However, critically surveyed scientific literature indicates that there is no evidence of any association of milk fat with increased risk of coronary heart diseases. Age old and proven Ayurvedic system of medicine has proved the usage of ghee to induce several beneficial effects on human health and used extensively for therapeutic purpose like in treatment of skin allergy, respiratory diseases, curative for ulcers and eye diseases. This suggest that ghee is a valuable form of dietary fat.

We get energy from food. We need energy for all the activities which we get by eating. The body structures as muscles, organs and bones are composed of the nutrients contained in food which are absorbed by the body.

Nutritional requirement of the major nutrients

Nutrients are the substances which are found in food and drive biological activity. They are essential for the human body. These are categorized into proteins, fats, carbohydrates (sugars, dietary fiber), vitamins and minerals (Sugishima, 2019). They perform the vital functions like building all parts of the body as muscle, bone, teeth and blood. Out of the 20 different kinds of amino acids that make up proteins nine are not synthesized in the body and are therefore called essential amino acids. These essential amino acids have to be supplemented through food. High-protein, low-carbohydrate diets have been found to be effective.Protein is an important component of every cell in the body. Large part of hair and nails are made up of proteins. The human body uses protein to build and repair the tissues, helps in making enzymes hormones and other body chemicals. Protein is an important building block of bones, muscles, cartilage, skin and blood.

Milk: Composition, Nutritional Role, & Importance for Human Health Introduction
Milk is one of nature’s most complete and balanced foods, offering a rich source of essential nutrients such as proteins, fats, carbohydrates, vitamins, and minerals in forms that are easily digested and assimilated by the body. It serves as a cornerstone of human nutrition, providing critical support for growth, bone strength, and overall health. Known as the nectar of life, milk not only sustains life but also enhances immunity, forming the first bond between mother and infant.
An adequate intake of calcium, particularly during childhood, is critical for bone development and preventing osteoporosis in later life. Rich in calcium, phosphorus, and vitamin D, milk is vital for maintaining strong bones and teeth while preventing osteoporosis. Its high-quality proteins support muscle growthand recovery, while lactose and fats provide both immediate and sustained energy. Micronutrients like zinc, selenium, and whey proteins strengthen the immune system, and its high water content makes milk an excellent source of hydration. These qualities make it a protective food for all age groups, from infants to the elderly.
While milk naturally lacks iron and has low levels of vitamin D, fortification with additional nutrients enhances its nutritional profile, making it even more beneficial. Fortified milk helps address deficiencies, supports bone health, and boosts immunity, making it an ideal dietary option for diverse populations. For infants and children, milk is a near-perfect food, and for adults, it serves as an excellent dietary supplement, particularly for its calcium, protein, and vitamin content. Beyond its nutritional benefits, milk plays a significant role in culinary traditions and cultural practices across the globe.

“Tell me what you eat and I will tell you what you are. The destiny of people depends on the nature of its diet.”

A. Brillat-Savarin

Milk is the only product which is considered nature’s almost perfect food. It is treasure house of unlimited nutrients. It is considered best and ideal food by virtue of possessing almost all the nutritional factors, viz., fats, proteins, carbohydrates, minerals and vitamins. They are not only of higher quality but are present in milk in such form and proportion that their digestion and assimilation in the body is very efficient. Milk also plays a supplementary role in our nutrition. If it is included in our diet it enhances digestion and assimilation of nutrients of other food products. This is the reason that it is kept in high esteem as a food and is called the nectar for living beings.

Milk is the first taste of food for whole mankind. It establishes the mother-infant bond and is a life promoter. Of the many fluids that biology offers milk is perhaps the most versatile in terms of its use– as food, as a growth stimulant and as a defense package to the user. To the infant mammal – be it a mouse, calf or a human child, mother’s milk is more than a source of energy and nutrients. It contains a wide variety of substances that defend the growing infant against infections.

Milk, a perfect blend of nutrition and palatability, plays an important role in preserving mental and physical health. Milk has long been recognized as the most wholesome and complete single food available in nature for health and as a medicine, both preventive as well as curative. Ancient chronicles as recorded in the Upnishads, Puranas and Vedas extol the beneficial and therapeutic properties of milk and milk products. It has been stated that cow milk, dahi and ghee impart knowledge and radiance, cure heart trouble and anaemia besides other bodily diseases.

1. Introduction

The demand for non-dairy based beverages in form of non-dairy milk is on rise due to several reasons. Firstly, the prevalence of lactose intolerance and milk allergy amongst a major percentage of population who cannot consume dairy milk and look for alternate source of proteins. The need for functional drinks is also a major factor which contributes to the increase in demand of milk-alternatives. It has also been reported that milk processors around the world face an uphill battle, including the dominance of private labels; consumer concerns over the presence of growth hormones in non-organic milk; fluctuations in commodity prices; supply shortages for organic milk; and growing consumer concern about the safety of animal products in general. With that long list of challenges, the market has had few growth opportunities even though consumers continue to prize milk for its nutritional benefits.

2. Need for Non-dairy Beverages

2.1 Prevalence of lactose intolerance

Lactose intolerance is estimated to affect 33 % of the global population, but the prevalence of the condition varies from country to country. It is also estimated that an average of 75 % of human adults have decreased intestinal lactase activity after weaning (NDDI, 2012).

1. Introduction

Heat transfer from a hot surface is a general method or technique of heating liquids and slurry type of food materials. In such cases the heat can be generated either directly by a heating element or indirectly from a hot medium like steam or hot water via a heat exchanger (e.g. shell and tube, plate). Therefore, for the heat transfer during heating by these techniques a temperature gradient will be required, which usually causes the fouling on the surface of the heating element or heat exchanger. Afterwards the fouling not only reduces the heat transfer rate but also results in quality deterioration within the product which is being processed. 

Microbiologists are constantly at risk of exposure to hazardous microorganisms that can cause diseases. These microorganisms may enter the body through inhalation, ingestion, cuts, abrasions, or the eyes. Therefore, handling cultures, slides, and live microorganisms requires utmost care. To ensure safety in the laboratory, several precautions must be followed:
1. Maintain cleanliness in microbiological labs at all times, taking extra care to prevent contamination from the air, equipment, personnel, or the environment.
2. Always wear a clean white lab coat or apron while working. After handling infectious microorganisms, the lab coat should be autoclaved.
3. No eating, drinking, or smoking is allowed in the laboratory.
4. Personal hygiene is essential in microbiological labs.
5. Wash hands with soap and water or a mild disinfectant solution (e.g., hypochlorite solution containing 50-100 ppm chlorine or 1-2% lysol solution) before starting work.
6. Disinfect the work surface by wiping down the lab bench with a disinfectant solution, such as 5% phenol or hypochlorite solution containing 200-300 ppm chlorine, both before and after work.
7. Keep the work area neat and organized at all times.
8. Use self-adhesive labels instead of moistening labels with your tongue.
9. Sterilize inoculating loops and needles by heating them in a Bunsen burner flame until red hot before and after use.

A boiler is a sealed vessel designed to heat water or other liquids, producing steam or vapor for various applications, including heating, power generation, cooking, and industrial processes. The operation of a boiler is similar to that of a pressure cooker but on a larger scale. The steam or vapor generated is used for domestic or industrial purposes, with the system usually involves involving combustion products that heat the water. Boilers come in various types, tailored for specific uses. While domestic boilers are compact and suited for household needs, industrial boilers play an important role in production processes, often operating on a much larger scale. These industrial boilers can be environmentally friendly when powered by natural gas or other low-emission fuels, helping industries reduce harmful emissions while maintaining performance. Industrial boilers have been a part of various sectors for centuries, with applications ranging from steam-powered locomotives to power plants. Their primary benefit lies in their energy efficiency and capacity to generate significant heat, supporting industrial operations. Whether in cooking or running manufacturing plants, heat plays a central role in daily life, and boilers provide a reliable means of delivering it efficiently. In industries, the use of industrial boilers helps reduce dependency on costly electric energy. As electricity can be expensive on a large scale, boilers allow manufacturers to lower operational costs. Additionally, industrial boilers require less management and minimize dependence on electricity, making them an economical and efficient option for industries.

OVERVIEW OF CANNING MACHINERIES
Canning is a food preservation method where selected raw materials are prepared, packed into containers such as tin, glass, or plastic jars, and sealed airtight. The contents are then heated to a sufficient temperature to destroy spoilage and pathogenic agents within the container, followed by rapid cooling to prevent overcooking. Canning extends the shelf life of foods, ranging typically from one to five years, with some products like freeze-dried lentils lasting up to 30 years.
Can Manufacturing Machinery and Equipment
• Can Body Reformer: Can bodies are often supplied collapsed to save space and ease transportation. The can body reformer shapes them into cylindrical forms, preparing them for further processing.
• Flanger: The cylindrical can bodies are flanged by the flanger, which has two flanging dyes. These dyes form grooves at the edges, preparing the cans for sealing.
• Seaming Machine: The seaming machine is used to close the open end of the can. It features a base plate to hold the can and an upper plate that presses the lid onto the can. The machine uses two seaming rollers (first and second) to seal the can tightly.
• Can Leakage Tester: After sealing, the cans are tested for leakage by immersion in water. If any leakage is detected due to improper sealing, it indicates that the can is faulty.
• Flange Rectifier: Cans that have been bent, deformed, or crushed during the flanging process are rectified using the flange rectifier machine, ensuring the cans are in proper shape for sealing.
• Can Coding Machine (Embossing Machine): This machine embosses codes on the cans, which include the product name, manufacturer details, and production date. It ensures proper identification and traceability of the product.c

The operation and maintenance of Dal Mills and Oil Mills are crucial components in ensuring the efficient processing of pulses and oilseeds. These mills play a significant role in the food processing industry, where the transformation of raw pulses and seeds into consumable products is vital for meeting the needs of consumers worldwide. The proper functioning of these mills requires a wellstructured operation strategy, which includes careful planning and execution of each process from raw material intake to the final product output. For Dal Mills, the primary operation involves cleaning, de-hulling, splitting, and polishing pulses, while for Oil Mills, the process revolves around seed cleaning, pressing, and extraction of oil from oilseeds like sunflower, soybean, and groundnut. Maintenance is a critical aspect of ensuring the smooth operation of these mills. Regular maintenance schedules, including inspection of machinery, replacement of worn-out parts, and calibration of equipment, help prevent costly breakdowns and extend the life of the machines. Preventive maintenance practices also contribute to the overall efficiency of the mill by minimizing downtime and optimizing energy consumption. Furthermore, the quality of the final product is closely tied to the condition of the milling machines. Proper maintenance ensures the production of high-quality dal and oil that meet industry standards and consumer expectations. The effective management of both operational processes and maintenance procedures is essential for the profitability and sustainability of Dal and Oil Mills. Skilled personnel, adherence to safety guidelines, and a proactive approach to troubleshooting and repairing equipment are key to achieving consistent output and high product quality. This chapter will delve into the specifics of the operation and maintenance practices required to run Dal Mills and Oil Mills efficiently, providing insights into best practices, challenges, and solutions that contribute to the overall success of these milling operations.

The operation and maintenance of dehusking, dehulling, degerming, and drying equipment are crucial in ensuring the efficiency and longevity of these machines in grain and seed processing industries. These machines play a vital role in removing husks, hulls, and germs from grains, as well as reducing moisture content to enhance storage stability. Proper handling and regular maintenance not only improve performance but also reduce downtime and operational costs. Dehuskers are used to remove the outer husk from grains like paddy and millet. Their efficiency depends on factors such as roller pressure, feed rate, and machine alignment. Routine maintenance involves checking for wear and tear on rollers, adjusting pressure settings, and ensuring that all moving parts are well-lubricated. Similarly, dehullers remove the outer shell of seeds and grains, requiring careful calibration to avoid excessive grain breakage. Blade sharpness, motor performance, and sieve integrity should be regularly inspected to ensure optimal functioning. Degermers are employed to separate the germ from the endosperm in grains like maize. This process enhances the shelf life of processed products and improves their quality. Regular maintenance of degermers involves inspecting the abrasion plates, checking the feed rate, and ensuring that airflow mechanisms are clear of obstructions. Any malfunction can lead to uneven separation, affecting the final product quality. Dryers are essential in reducing the moisture content of grains to prevent microbial growth and spoilage. They require proper temperature control, uniform airflow, and regular cleaning of heat exchangers and drying chambers. Overheating or under-drying can compromise the grain quality and lead to storage losses. Timely inspections of sensors, air ducts, and burner efficiency help maintain effective drying operations. A well-planned operation and maintenance routine ensures these machines function optimally, increasing productivity and product quality while reducing energy consumption and repair costs.

OPERATING MECHANISM OF A FLOUR MACHINE
The flour grinding machine operates using blade cutting, high-speed air impact, and a two-layer destruction function that integrates collision and particle sorting. The principle of operation involves the rotor generating high-speed airflow during blade cutting. As the material accelerates within the airflow, repeated impacts cause it to be destroyed in two layers simultaneously, enhancing the destruction rate. As airflow enters the classification chamber, the destruction process rotates at high speed, and the classification rotor generates centrifugal force. The viscous effect of the airflow creates centripetal force. When the centrifugal force on the particles exceeds the centripetal force, the coarse particles return to the destruction chamber, while fine particles are carried with the airflow to the powder collector for collection. There are three primary operating characteristics of the flour mill. First, the main shaft in the power system is sequentially equipped with bearing caps, radial ball bearings, bearing pads, and thrust ball bearings from top to bottom. Second, the grinding system consists of a spring, spring pad, inner grinding head, adjusting nut, and outer grinding head mounted on the spindle. Lastly, the separation system features a brush mounted on the spindle, with a tension spring above and an adjusting nut below the brush. The core principle of the flour grinding process is to reduce grains like wheat, corn, or rice into flour particles. Raw grains are introduced into the mill's hopper and then conveyed to the grinding chamber containing the grinding stones or rollers. As the grains pass through the chamber, the high-speed rotation of the stones or rollers generates friction that crushes, grinds, and pulverizes the grains into a coarse powder, which gradually becomes fine flour. Flour mills are equipped with adjustable settings to regulate the gap between the grinding stones or rollers, allowing for varying flour fineness. This ensures the production of flour suitable for different culinary needs, from coarse flours for rustic bread to fine flours for delicate pastries. The ground flour particles are then

Packaging machinery is integral to all packaging processes, from primary packaging to distribution packs. It encompasses various stages, including fabrication, cleaning, filling, sealing, combining, labeling, overwrapping, and palletizing.Food packaging refers to the methods, materials, and technologies used to package food items. It serves multiple purposes, such as prolonging the shelf life of products. However, food packaging is not a recent innovation, and its history is quite fascinating. Food packaging has existed in various forms throughout history. The Journal of Agricultural and Food Chemistry highlights that Napoleon played a major role in its development by offering a reward of 12,000 francs for anyone who could invent a method to preserve food for his army. This prize went unclaimed for 15 years until Nicholas Appert introduced the canning method. Appert’s process involved boiling food and sealing it in airtight glass containers, laying the foundation for modern canned food as we know it today.
EVOLUTION OF FOOD PACKAGING THROUGH AGES
The history of food packaging dates back centuries! The Chinese were pioneers in developing paper and wrapping materials, which were utilized for storing food. In ancient Egypt, advancements were made in glass-blowing and molding techniques, allowing glass to be shaped into various forms for food and water storage. Over time, innovations continued to evolve, with figures like Nicholas Appert leading the way. Appert's glass canning method eventually led to the creation of modern metal cans. In the 1880s, the food manufacturer Quaker Oats introduced cardboard cereal boxes as a packaging solution for their oats, further advancing food packaging technology.
Food packaging serves several vital functions beyond simply containing food. Here are Some Key Roles of Food Packaging:
• Preservation: Packaging prevents exposure to air and moisture, which can cause food to spoil quickly. Proper packaging extends the shelf life of food, benefiting manufacturers by reducing waste.

The upkeep of food processing equipment such as peelers, slicers, pulpers, and juicers are essential to ensure the smooth and efficient functioning of food production processes. These machines are commonly used in the food industry for preparing fruits, vegetables, and other raw materials by performing tasks such as peeling, slicing, pulping, and juicing. Proper operation of these machines enhances productivity, reduces processing time, and improves the consistency and quality of the end products. Efficient operation requires a comprehensive understanding of each equipment's mechanism and design, allowing operators to optimize the use of these machines while minimizing operational risks. For instance, peelers are designed to remove the skin of various fruits and vegetables without damaging the product, slicers are employed to cut products uniformly for further processing, pulpers are utilized to separate the pulp from seeds and skins, and juicers extract liquid from fruits and vegetables while retaining the flavor and nutritional content. However, ensuring smooth operation also depends on regular upkeeping practices. This includes routine inspections, lubrication, and cleaning to prevent wear and tear, mechanical failures, or contamination. Maintenance tasks also involve checking for malfunctions or parts that need replacement to avoid costly downtime. In addition, proper calibration and adjustment are crucial to ensuring the machines operate at their optimum efficiency and meet safety standards. Failure to maintain these machines can lead to inefficiencies, product defects, and even safety hazards. Therefore, understanding both the operational and maintenance procedures for peelers, slicers, pulpers, and juicers is critical for sustaining production standards, minimizing operational disruptions, and prolonging the life of the equipment.
PEELER
Peeling machines are very important in the food processing sector, providing efficient and accurate skin removal from various fruits and vegetables. These machines simplify the peeling procedure, ensuring that products meet strict standards for subsequent processing or packaging. This detailed guide focuses on the use of blade peeling machines, examining their features and uses in the food industry.

Rice milling machines are crucial in the rice production industry, as they are used to remove the husk and bran layers from paddy, resulting in polished white rice. Various types of rice milling machines, such as hullers, whitening machines, polishers, and graders, are available, each designed for a specific function in the milling process. When selecting a rice milling machine, it's essential to consider factors such as capacity, efficiency, power consumption, and maintenance requirements. Additionally, the machine’s size should be aligned with the scale of rice production operations. By investing in the right machinery, producers can enhance overall efficiency and product quality, while reducing manual labor and processing time.
OVERVIEW OF RICE MILL MACHINERY
Rice mills are food-processing facilities where raw paddy is converted into rice. These mills use modern machinery to process the paddy harvested from fields, transforming it into the final product, rice. Various types of rice mill machines are utilized throughout the milling process to ensure efficient and effective production.
Applications of Rice Mill Machinery
Milling is one of the key steps in the production of rice. It is generally performed post the production of rice. The paddy produced industrially cannot be consumed in its natural forms. This is why paddy is processed post its production, by the process of milling. It removed in order to make it fit for human consumption.
Variants of Rice Mills
There are many types of rice mills, each tailored to specific processing needs and production capacities. Below is a list of machines used in rice mills:
• Single-Pass Rice Mills: These machines are designed for simpler rice milling operations. They typically perform the essential tasks of husking and whitening in a single pass.
• Multi-Pass Rice Mills: Ideal for large-scale operations, multi-pass mills carry out multiple milling stages. These stages include cleaning, husking,

Cellulose is a homopolymer of β (1–4) glucose linkage. It is the most abundant polymer present on the surface of the earth, which is mainly produced by the vascular plants (Sharma et al., 2019; Dayal et al., 2013; Sheykhnazari et al., 2011). Cellulose obtained from higher vascular plants has been employed for making textile and papers.

Introduction

The green revolution which initiated in India during 1960’s to 1980’s was an attempt to overcome the then prevailing threats of food scarcity and lack of foreign exchange. The food scarcity was a result of severe drought which engulfed the country as well as the political situation it had to face after its short period of gaining independence (Reddy, 2010). The only way out to overcome the acute food scarcity was intensive agriculture, with the use of high yielding varieties, chemical fertilisers and pesticides which heavily boosted agriculture production in India. The remarkable increase in production and productivity resulted in non-judicious use of chemical inputs to extract the maximum from the degrading soil. This marked the era of soil, water and air pollution and extreme health hazards to all life forms.

Rachel Carson’s “Silent spring” in 1962 was an insight into the path of DDT the then prevalent pesticide through its effect on the food chain as well as the environment. She was one among the scientists to raise her voice against the indiscriminate use of pesticides. The evident impacts raised concerns over the continued use of chemical inputs (Lairon, 2010). The situation warranted the reduced or limited use of chemicals in agriculture which resulted in an “organic movement”. This caused a slow, but evident shift in the interest of growers and consumers towards organic agriculture for health security, food safety, quality and better returns (Niggli et al., 2007).

This review is an attempt to analyse the various factors affecting the safety and quality of organic food products in comparison with conventional food. Drawing a proper conclusion was a difficult task due to the limited availability of scientific papers published in this aspect, indication of only trends rather than solid proofs and non-revelation of non-significant data regarding related experiments. However, this review could evaluate the positive and negative aspects of organic cultivation and food production from the available data, so as to suggest measures for improving the quality and safety of organic food products.

27.1 Introduction
Processed organic food typically consists of solely organic ingredients. If there are any non-organic components, a specified proportion of the food’s plant and animal ingredients must be organic, and any non-organic ingredients must meet specific agricultural standards. Organic foods should not contain artificial additives and are usually processed using fewer synthetic methods and materials, avoiding practices like chemical ripening, food irradiation, and genetic modification. While synthetic pesticides are prohibited, non-synthetic pesticides are permitted. Milk from cows—or any other animal—serves as a useful environmental indicator for measuring pollutants and pesticides because substances consumed by the animal end up in the milk it produces. If contaminants are present in the grass, they will ultimately be found in the milk.

27.2 Beyond these four main factors have led to the increasing interest by farmers and consumers in organic dairy farming
1. Consumer concerns about food safety and animal welfare
2. Overproduction of food (perceived as low in quality)
3. The environmental effects of intensive farming

Overview of the Indian Dairy Sector

India’s dairy sector occupies a unique global and domestic position due to its scale and socio-economic impact. As the world’s largest producer of milk with 230.6 million tonnes of production in 2022-23 (BAHS, 2023), India contributes approximately 23% of global milk production, surpassing countries like the United States and New Zealand (FAO, 2020). This dominance is largely attributed to Operation Flood, the revolutionary initiative launched by National Dairy Development Board (NDDB) in the 1970s, which transformed India from a milk-deficient country to the world’s largest milk producer (World Bank, 1998). Operation flood is known for its contribution in increasing milk production, supplement rural income and make available reasonable prices to the consumers. This initiative laid the foundation for the cooperative model of dairy production, epitomized by the success of organizations like Amul, which became a global model for dairy development (Candler & Kumar, 1998).

Packaging is a tool that is used to contain the product, protect the product from environmental hazards and help in marketing the product. Examples of ideal natural packaging systems are that of a banana, orange, coconut and egg, where the packaging is provided by nature. The major step forward in the food processing arena has been the ability to protect and preserve products with packaging and hence ensuring the availability of fresh and processed products out of season and over long distances in various forms. Milk is a highly perishable product and is not uniformly available round the year to the whole country due to geographical and genetic variations. If dairy products are to be available all the year round the country, irrespective of the season and area, it must be presented in packages that are convenient to purchase and use.

Packaging has additional responsibilities of providing convenience, safety and facilitating, besides handling, storage and distribution of products. It should prevent spoilage of food by microbial or insect attack. It also preserves the quality and nutritive value of many foods by the exclusion of oxygen and the control of moisture loss or gain. It increases the shelf-life and ensures longer availability and contributes to the product image through structural and graphic design. Product information is also given out through the medium of labeling, which acts as a tool for marketing and advertising.

Packaging means a coordinated system of preparation of goods for distribution, storage, merchandizing and shipment at optimum cost compatible with the requirements of the product. It also includes the art, science and technique used, preparatory to and during transportations and selling of goods and technical methods and work processes related to the above preparations.

The broad range of dairy products necessitates that packaging equipment and materials encompass nearly all types from flexible to rigid and from high to low barrier. The general types of packaging and equipment are discussed below with a focus on fluid products but it must be recognized that other dairy products such as cheese have their own particular packaging requirements and technologies.

Role of packaging in distribution and sale: The essence of what makes milk and dairy products important source of human nutrition also causes rapid deterioration and high perishability. The major role of dairy packaging is to retard the deterioration by preventing microbial recontamination and excessive chemical deterioration. Fluid products are especially susceptible to microbial, enzymatic and chemical degradation. In addition to retarding quality loss, packaging must provide containment, facilitate use, identify products, communicate, and appeal to consumers, all with maximum production efficiency. The large volumes and low unit value means that these functions must be met with minimal economic cost and environmental impact. Because food packaging is generally highly regulated, legal requirements must also be understood and met.

Introduction
 
The emerging functional foods market presents a considerable challenge to all manufacturers to keep abreast of the use of adequate packaging materials for their products. The interest in functional foods is intrinsically linked to the potential health benefits of their bioactive components. Preserving these bioactive components is, therefore, a crucial factor to providing the anticipated health benefits of functional foods. However, recurring failure in maintaining the quality of functional foods has been reported. Functional foods include a wide variety of products such as prebiotics and probiotics, dried foods (fibers, probiotics, tea, herbs, etc.), fermented products (yogurts, kefirs, vegetables), and fresh fruits and vegetables.

INTRODUCTION

Packaging is an important aspect in modern life and in fact the word ‘packaging’ developed a literal value indicating presentation of an issue or material in a comprehensive and compact manner. Food packaging has become a revolutionary trend and plays a dominant role in the promotion of marketing of various fresh and processed food products. The reason could be a number of aspects inclusive of protective, legal and aesthetic elements. The industrial revolution in the late 18th century caused major impact on manufacturing process. Without appropriate packaging no food is acceptable and even in the common household food packaging is being practiced in its own way to render food safety and convenience for various culinary operations. Therefore, food packaging needs to be considered as an essential element of food processing and marketing and it is one of the key areas in food technology making rapid strides in research and development.

Introduction

Food and nutraceuticals are obtained from various agricultural resources available in this planet. Many types of bio-active compounds are available in small quantities in the plants and animals which are evidenced to improve performance of various organs, increase in immunity and cure for some diseases. Last decade evidences several advancements in developing phytochemical formulations which can be used as a cure for many diseases as well as helps in boosting immunity in human being. Such materials exist in different form, structure and chemical compositions. Examples of such chemicals are phenolic and organosulphur compound (Pascall 2011). The vegetables, fruits and seeds are used without further processing. Some plants are subjected to cooking before its consumption. Many industries are carried out extraction of bioactive compounds and developed products in the form of tablets, powders and liquids which are available in the market. In order to make commercial process more economic and feasible, long term storage of plant residues (Raw materials) as well as the prevention of the extracts emerges as essential requirement for the industries. Moreover, the products requires suitable packaging solution to increase its self-life, preventing it from the influences of environment, and to make viable solution for easy access which makes it more user-friendly. Suitable packaging solution is required for mainly the three reasons: (i) prevention. (ii) protection and (iii) presentation. Prevention is required in-order to avoid deterioration of the packaged items due to microbial growth, loss in moisture and enzymatic action. Protection is required for the purpose of protecting the packaging materials from the contamination as well as from the environment impact and rough handling. Presentation is equally important to provide it an aesthetic look to make it more approachable to the consumers. Moreover, packaging also offers “labelling for easy identification, warnings, instructions, and nutritional information, ease of transportation” (Pascall 2013).

26.1 Introduction
Developed nations’ packaging sector has achieved great advancement. The advent of innovative marketing strategies such hyper markets and selfservice outlets has pushed the packaging technologies in these nations to unprecedented heights. The evolution of appliances and packaging tools as well as the introduction of fresh and better packaging materials has happened holistically. In nations like India still in development, packaging is still in its infancy. Packaging any product is the arrangement of the most appropriate containers and components to safeguard, move, label, and identify any good.
26.2 Packaging
Packaging is putting an item into a protective wrapping or container for use or storage. The package serves three purposes: it stores, shields, and merchandising tool. For the safe delivery of the product through the several phases of manufacturing, storage, transportation, distribution, and marketing, it is a necessary link between the manufacturer and ultimate customer. Fresh, sound and easy form of milk delivery depends on protective packaging to minimise losses and withstand the challenges of climate change, transit, handling etc.
1. To contain the product: The package should be big enough and built with suitable elements to stop spoiling and leaks. It should be sturdy enough to withstand handling, shipping, and storage difficulties as well as closely matched with the product.
2. To protect the product: Packaging seeks to protect the product from microbiological activity, heat, light, moisture, oxygen, evaporation, etc., therefore preventing contamination, loss, damage, or degradation.
3. To help in selling the product: Easy dispensing, reclosure, disposal, and possible reuse should be made possible by the packaging form, therefore helping the marketability of the product.

1. Introduction

Packaging is the integral part and cornerstone of food processing industry. The development of food processing industry goes hand in hand with advancement of packaging technology. Packaging Institute International has defined packaging as “enclosure of products, items or packages in a wrapped pouch, bag, box, cup, tray, can, tube, bottle or other container form to perform one or more of the following functions: containment, protection, preservation, communication, utility and performance”. Lockhart has defined packaging as “a socio-scientific discipline that operates in society to ensure the delivery of goods to the ultimate consumer of those goods in the best condition intended for their use”. Food packaging technology has came a long way from use of anything in hand for wrapping up a product to becoming a key element in product development and design.

Introduction

Military personnel’s are deployed for operation in adverse climatic conditions like desert, cold (arctic) and high altitude regions. Stressful and challenging living conditions have affected the outcome of many battles, campaigns and wars. Acclimatization to the environmental condition is a very essential stage of deployment. The time for acclimatization is restricted/limited for the effective operation towards the purpose of deployment. The performance of the military personnel in various deployed regions depends on the nutrition provided by the food consumed. The operational rations are designed to provide the essential nutrition to enhance their performance during training and/or operational situations.

Nutrition requirement of military personnel is different from that of the civilians. The nutrition requirement also varies with the kind (sedentary or continuous work) and region (plain, desert or high altitude) of deployment. The environmental stress caused by extreme heat, cold, etc. also influences the nutrient requirement/ intake. The insufficient dietary nutrient intake affects the immune function, pace of recovery from illness and injury and also the physical performance (Tharion et al., 2005).

The operational ration is also designed in such a way that it provides to the military personnel the required nutrition from the build in nutrition reserves during certain operational situations. Considering the vital criteria for nutritional requirement, the menu for the military personnel is designed. The chapter discusses the past, present and future of the army operational ration (AOR) in various countries of the world and the influence of advances in food processing methods in AOR menu.

9.1 Introduction
The term “pasteurisation” is derived from the Frenchman Louis Pasteur, who demonstrated that the preservation of wine was enhanced by heating it to a temperature of 122 to 140 °F, which eradicated spoilage organisms. This occurred between 1860 and 1864. The utilisation of this procedure resulted in the development of a new term, “pasteurisation,” which rapidly acquired popularity in the field of technology. Although Louis Pasteur was a pioneer in the discovery of the use of thermal treatment to preserve wine, the process of pasteurising milk was initially attributed to Dr. Soxhlet of Germany in 1886.

9.2 Heat treatment of milk
In the context of market milk, pasteurisation is currently defined as the process of heating each component of milk to a minimum of 63°C for 30 minutes, 72°C for 15 seconds, or any other temperature and duration that achieves the same level of effectiveness. Equipment that has been certified and functions properly is required for this process. The milk is promptly chilled to a temperature of 5°C or lower after the pasteurisation procedure.

1. Introduction

Milk is a source of abundant nutrition has been a vital part of human civilization since prehistoric times. However, because of its perishable nature, it requires immediate processing to improve the shelf life and safe consumption .With the advancement of processing techniques in dairy and food processing, there is a widespread option being utilized to improve the milk shelf life byeither thermal technologies (pasteurization, sterilization, and ultra-high temperature) or nonthermal technologies (high pressure processing, high pressure homogenization, pulse electric field and ultra sonication). Still, pasteurization and sterilization are the two foremost process is used for milk industries. Pasteurization is the thermal inactivation of microorganisms at temperatures below100°C that enhance the safety and quality of milk and milk products and extends the shelf life to an extent. 

Growth of a microorganism implies an increase in amount of protoplasm, formation of new structures and eventually formation of new cells. Balanced growth means cell components increase in proportion to each other and unbalanced growth means cell components increase in a non constant relationship to each other

Microbial growth and growth curve

Phases of growth

When bacteria are grown in the laboratory in liquid medium, the medium becomes cloudy or turbid. It is possible to measure the increase in numbers of bacteria at various time intervals and plot the values on a graph representing a growth curve.

Lag Phase: When cells are first inoculated into fresh medium containing all the nutrients they require, they take a short time to adapt before they start to divide. This is termed the lag phase.

Abstract

Consumer now-a-days relies on manufacturing and processing standards, particularly to know what ingredients are present, due to dietary, nutritional requirements, or medical conditions (e.g., diabetes orallergies). Modified PCR and combination of PCR with other analytical tools have been successfully used for analysis of various parameters related to functional foods such as detection and quantification of beneficial as well as food borne pathogenic microorganisms, food allergens, raw material source, bioactive compounds, genetically modified foods. Multiplex PCR method has been found to be an efficient tool for simple, rapid, and reliable identification of Lactobacillus and Bifidobacterium in probiotic products. Food allergens like gluten, peanut, hazelnut etc. could be easily detected in foods using PCR, even if present in small quantities. BOX-PCR and PCR-DGGE analysis have been used for identification of bacterial diversity of a naturally fermented functional food (Enzyme). HPLC combined with real time -PCR were successfully used to quantify and analyse compounds of secondary metabolites like phenylpropanoid amides, which represent an important class of nutraceutical having strong antioxidant and chemotherapeutic effects in various transgenic tomato tissues. Detection of active compounds in natural plant products were successfully achieved using PCR techniques. In general PCR have gained more importance as it has high sensitivity, improved precision, wide dynamic range for quantification, genotype based and is quick method of detection and quality control of foods than traditional culture based methods.

What is Performance Appraisal?

Performance Appraisal (PA) is the process through which an individual employee’s behaviour and accomplishments for a fixed time period are measured and evaluated. The major purpose of measuring and evaluating is to assess the worth or value of an employee. Performance appraisal is a systematic and objective way of judging the relative worth or ability of an employee in performing his task. Performance appraisal helps to identify those who are performing their assigned tasks well and those who are not and the reasons for such performance.

The compliance with hygienic and aesthetic standards in the dairy factory is, in the final analysis, dependent on the human element. Each employee, from top management to the most junior operative, has his role in the factory sanitation programme and carelessness at any stage may cause quality deterioration of products or endanger the health of consumers. Legal action against the dairy may also result from neglect of hygiene. Personnel hygiene refers to the personal cleanliness and related habits of the workers. Milkborne infections frequently originate from food contaminated by workers through their hands, breath, hair, perspiration, pimples, infected wounds, coughs, and sneezes. Transfer of even traces of human and animal excreta by the workers is a potential source of pathogenic microorganisms. Foodborne illness is known to originate from workers who were ill and practiced unsanitary food handling methods or poor personal hygiene. Even the healthy worker, who does not exhibit the symptoms of the disease, may harbour food poisoning bacteria in the respiratory or intestinal tract. It is always desirable, as a matter of practice, to look at different parts of the human body in terms of potential sources of bacterial contamination. Provisions regarding personal hygiene of employees are contained in all legislation dealing with milk treatment.

Introduction

The term pesticide refers to any chemical or mixture of chemicals intended for preventing, attracting, repelling, controlling or regulating a pest, including unwanted species of plants and animals during the production, shipment, transit, storage, processing or distribution of any food or agricultural commodity. The term includes compounds classified as insecticides, fungicides, herbicides, accaricides, rodenticides, plant growth regulators, sprouting inhibitors, chemosterilants, desiccants etc. The term excludes substances like animal drugs and food additives. Pesticides are chemicals used to destroy or control weeds, insects or other pests. The term pesticide residue refers to the remnants of the pesticide after weathering and it consists of the parent molecule and the degradation products which are toxicologically significant. In general, the pesticides, by virtue of their inherent toxic nature are recommended to be used as per Good Agricultural Practices (GAP) only. If GAP is not followed, contamination of the produce with the residues may pose significant health risk to consumers, non target organisms, biota and environment as a whole. When a pesticide is used for pest control purposes, they may reside in the form of metabolites.

Pesticide residues occur as the leftover of any pesticide after its application for pest control and it includes the parent compound and its toxic metabolites. Pesticide residue analysis may be defined as qualitative and quantitative analysis of samples drawn from agricultural field, market and environment for pesticides and toxic metabolites. Pesticide residues are invariably present in micro – quantities and generally estimated at ppm/ ppb levels. After application of the diluted spray solution, they are present at sub microgram levels in the substrate and hence their estimation at ppm or ppb levels is very cumbersome and need to be performed with utmost care. Moreover, the residue data generated should be accurate, reliable and reproducible. The level of residue in any edible commodity has to be below their prescribed maximum residue limits (MRL) value for market acceptance and below maximum permissible intake (MPI) for safety to consumers. Pesticide residue data are mainly utilised by regulatory authorities for estimation of MRLs and for assessing impact on human health and environment, particularly their adverse effect on non-target organisms. The detection of the pesticide residues must be confirmed beyond doubt and confirmation by GC-MS/MS or LC-MS/MS is generally acceptable. Since pesticide residues include parent compounds, isomers and toxic metabolites, appropriate methods of detection should be selected so that all the components are measured separately. Environmental samples/ market usually contain residues of large number of pesticides, for which multi residue methods are required for estimation/screening of such samples.

4.1 Phases of technology transfer
To translate laboratory research into market ready product, it is important to understand steps or phases involved in this technology transfer process. The process typically includes six main phases, each with a different role (figure 9).
4.1.1 Research
Technology transfer begins with research, the critical stage of exploring and discovering novel knowledge, technologies, or innovations that may have potential commercial applications. The research phase can occur in academic institutions, research organizations, or private sector companies, often funded by public or private sources. Thorough research ensures that the technologies being transitioned are scientifically and technically robust, thereby increasing their potential for market success. Therefore, the research phase involves creating and evaluating new ideas, confirming their feasibility, and identifying IP prospects, all of which are key components of TT success.
4.1.2 Innovation disclosure
Innovation disclosure is the first formal step where the innovation is reported to the appropriate TTO or IP management team. This process ensures that the institution or organization recognizes the innovation and evaluates its potential for protection and commercialization. It includes following information:

Milk is a complex colloidal dispersion, the physical and physicochemical properties of which depend on intrinsic compositional and structural factors, extrinsic factors such as temperature, and post-milking treatment.

There is no clear dividing line between physical properties and physicochemical properties. However, physical properties may be thought of as the measure of the bulk behaviour of milk and of how milk interacts with energy, while physicochemical properties are measures of how bulk behaviour and energy interactions depend on the constituent colloidal particles, molecules, atoms and ions in milk.

Knowledge of physical properties is of importance particularly in the technological and engineering design and control of milk processes and processing equipment. Knowledge of physicochemical properties provides the basis for the design of modern methods of milk analysis, determination of milk microstructures and elucidation of the complex chemical reactions that occur in milk.

In the dairy industry measurements of the physical properties of milk and milk products are made to secure data necessary for the design of dairy equipment (e.g., heat conductivity and viscosity) to determine the concentration of a component (e.g., specific gravity to estimate solids-not-fat or freezing point to determine added water), or to assess the extent of a physical or chemical change (e.g., titratable acidity to follow bacterial action or viscosity to assess aggregation of protein micelles or fat globules). The great advantage of physical measurements for such purposes is their speed and simplicity as well as their potentialities for automation.

Use of physical property to measure concentrations or changes in degree of dispersion demands knowledge of the contribution of the several components to that property. Furthermore, the natural range of variation of the property in milks or products is of major interest. The precision and suitability of possible methods of measurement are also of prime importance.

Physical Chemistry of Foods

    1.    Thermodynamics is primarily concerned with energy and entropy. Energy, also called internal energy (U), comprises heat and work; it is measured in joules (J).

    2.    Energy may be recalled that work generally equals force times distance (in N_·m = J) and that force equals mass times acceleration (in kg ·m· s^-2 = N).

    3.    According to the first law of thermodynamics, the quantity of energy, i.e., heat (q) work (p) potential energy, is always preserved.

    4.    Entropy (S)  is a measure of disorder; it is given by   
        S = K_B ln Ω
        Where K_B is the Boltzmann constant (1.38 ×10^-23 J × K^-1) and W is the number of  ways in which the system can be arranged, also called the number of degrees of freedom.

    5.    Colligative solution properties : The lowering of the chemical potential of a solvent by the presence of a solute causes changes in a number of physical properties: vapor pressure, boiling point, freezing point, osmotic pressure, etc. (the magnitudes of these changes all are proportional to the mole fraction of solute).

The primary constituents of milk are water, fat, protein, sugar (lactose), minerals, vitamins, and enzymes. Milk is a thin emulsion made up of two phases: A continuous aqueous colloidal phase and a dispersed phase of oil or fat. It is an opaque white liquid containing fat in an emulsion, protein, and a few minerals in a colloidal suspension, and lactose along with soluble proteins and a few minerals in a true solution. The physical characteristics of milk are comparable to those of water, but they are altered by the degree of dispersion of the colloidal and emulsified components as well as the presence of different solutes, such as salts, lactose, and protein, in the continuous phase.

Physical Appearance, Color and Optical Properties

Fat globules and casein micelles scatter light, giving the appearance of turbid and opaque milk. The way that molecules scatter light has an impact on optical characteristics. When the wavelength of light and the particle’s magnitude coincide, light scattering happens. Consequently, light with shorter wavelengths is scattered by smaller particles and vice versa. Because casein micelles scatter blue light more than red light at shorter wavelengths, skim milk appears slightly blue. Cow’s milk has a creamy color because of beta- carotene, a carotenoid precursor to vitamin A. The greenish tinge in whey is due to the presence of riboflavin. Turbid and opaque due to scattering of light mainly by protein micelles and fat globules.

Snack foods have become an essential part of the diet throughout the World and they are prepared from natural ingredients or components to yield products with specified functional properties. Extrusion cooking technology getting more popularity over other traditional processing technologies because extrusion shows continuous efficient cooking, mixing and forming process.

Abstract

Upcoming era of functional foods has led food scientists and food processors to deeply understand the role of phytochemicals in promoting human health. Phytochemicals are the secondary metabolites produced by plants and are commonly found in our daily food. Natural food products seem to be good substitute for pharmaceutical supplements to improve health status of people. Therefore, consumer's interest is growing in the food items naturally containing phytochemicals, each having there own functional and health aspects. Most discussed phytochemicals in the present paper are carotenoids such as lycopene, beta-carotene, lutein and, polyphenols such as phenolic acids, flavonoids, anthocyanins and isoflavones. Major dietary source for carotenoids include orange and yellow fruits and vegetables as well as green leafy vegetables whereas polyphenols are found abundantly in green tea, wine, berries, cocoa, broccoli. Carotenoids can also be used as colorants in foods during processing. The role of polyphenols as an antioxidant is well characterized because of there ability to scavenge free radicals or bind pro-oxidant metal ions by means of their hydroxyl group. Carotenoids also play an important role in protection against photooxidative processes by acting as singlet molecular oxygen as well as peroxyl radical scavengers, thus acting as potent antioxidant. Apart from antioxidative properties multitude of health benefits are associated with carotenoids and polyphenols such as reduced risk of age-related macular degeneration, certain cancers such as prostate, lung and colon, prevention of cardiovascular disease and enhancing immunity towards infection. Hence, continuous developments are being made to combine phytochemicals to avoid improper combinations that may nullify the effect of supplements and cause lower absorbance.

An ice cream plant is a highly interconnected operation in which quality, food safety, productivity, maintenance, cost, cold-chain performance, and business results influence one another. This chapter presents plant audits as management tools rather than simple compliance exercises. It provides a structured monthly audit system covering raw materials, production, quality assurance, hygiene, maintenance, productivity, cost control, warehouse operations, cold chain, documentation, and KPI performance. Department-wise scoring enables management to compare performance, identify weaknesses, prioritize corrective actions, and track improvement. The chapter also discusses common audit mistakes and best practices. A disciplined audit system strengthens accountability, reduces losses, improves operational control, and supports continuous improvement.

Introduction

Vast proportions of the population of the world are dependent on plants as their principal source of food either directly or indirectly. Recent decades have also seen increased numbers of people turning to alternative medical therapy based upon traditional folk medicine or food as a form of medicine. These alternative therapies emphasise the importance of a ‘good diet’ in maintaining and restoring health. Under these circumstances, vast majority of population may see diet therapy, dietary supplements and non-invasive alternative therapies as a safer, less technological and more natural way of maintaining health and treating and preventing individuals from illness. These alternatives may be seen as empowering the consumer and shifting the locus of control away from the medical establishment. This chapter covers many crucial topics to understand the chemistry and bioactivity of the active compounds of plant origin. It also aims to cover the latest research on the bioactive compounds.

Introduction

Tissue culture refers to the technique of growing cells, tissues, or organs under controlled, artificial conditions. This allows propagation of tissues from a small sample of cells/tissues under sterile conditions. Plant tissue culture is widely used for various purposes, including the production of disease-free plants, rapid multiplication of plants with desirable traits, genetic modification, conservation of rare or endangered species, etc. Tissue culture is a valuable technique because it enables consistent and large-scale production of plants, ensures genetic uniformity, and allows manipulation of plant biology at cellular level. In this chapter, we will discuss about the major types of tissue culture techniques and their advantages, disadvantages, as well as applications in brief.

Different Types of Tissue Culture

Callus culture involves induction and growing of unorganized, undifferentiated cell masses from an explant on a nutrient/culture medium. The part of plant used to induce callus is called explant which can be tissue, organ or part of a plant.

Organ culture is used to maintain or grow an entire organ or a part of organ in vitro. It preserves the structure and function of the organ for studies or transplantation.

Embryo culture involves isolating and growing embryos from seeds or ovules in a nutrient medium. It is used to bypass seed dormancy or rescue embryos from hybrid crosses that may not develop naturally.

Cell suspension culture involves growing dispersed cells or small cell clusters in a liquid medium under continuous shaking. This is used for large-scale production of cells, secondary metabolites, and studying cell biology..

A TTO fills the important intermediary position of linking research institution with industry so that innovations and new ideas can reach market. To be able to facilitate that effectively, the institutions must have well-defined R&D policies that include Sponsored R&D, Collaborative R&D, and Grant-in-Aid R&D. These ensure that the research remains properly managed, regulatory compliance assured and aligned with institutional priorities. This chapter has discussed about key policies that can help in successful operation of TTO while aligning institution’s mission and interests Various core policies that help in successful technology transfer include:
• Intellectual property policy
• Technology transfer policy
• Revenue sharing policy
• Startup/Spinout/Venture creation policy
• Conflict of interest/Conflict of commitment policy
Each policy has specific objectives. These policies collectively ensure a clear and consistent framework for technology commercialization.
11.1 Intellectual property policy
An IP policy is a formal document that provides guidelines for managing IP by an organisation. A strong IP policy build trust by ensuring efficiency and transparency. Other benefits of IP policy includes creation of environment to encourage innovation and commercialisation of IP. It also lays foundation to set out the rules for public-private partnerships while addressing issues among various stakeholders and ensures compliance. IP Policy is not law, but a proposed course of action.