eChapters

Selection fresh fruits/frozen stored fruits/chilled fruits/fruit pulp/sulphited fruit. Wash them to remove the dairt, dust, stems, leaves, stalks, undesirable portions.

Pickling is the process of preserving or extending the shelf life of food by either anaerobic fermentation in brine or immersion in vinegar. The pickling procedure typically affects the food’s texture and flavor. The resulting food is called a pickle, or, to prevent ambiguity, prefaced with pickled. Foods that are pickled include vegetables, fruits, meats, fish, dairy and eggs.

Agricultural food production is increased by adopting scientific farming methods and another way to increase the availability of food is preventing the food spoilage by adopting food preservation methods. The global agricultural and fish production accounts for 50% of perishable food, which requires preservation. Only half of the perishable foods are properly protected. Application of innovative technologies to promote the production of food is indispensable to meet the demand of emerging populations. It is equally important to protect the stored food from the invasion of pests and diseases. A food saved is a food produced.

Food Processing and Preservation, branch of manufacturing that transforms raw animal, vegetable, or marine materials into tasty, nutritious, and safe food products. The industry has its roots in ancient times, as humans have always needed to obtain food and store a portion for later use. Prehistoric humans may have dried fruits in the sun and stored meat in cold areas, such as ice caves. The modern food processing and preservation industry was born in 1809, when French chef and inventor Nicolas Appert, searching for a better way to provide food for Napoleon’s army, devised a method for sterilizing food in tightly sealed glass bottles.

Today a wide variety of methods are available to maintain and enhance the appearance and taste of food. Food processing and preservation methods also create products that are convenient for consumers, such as products that are ready to eat or require minimal preparation and cooking. Combining these methods with modern distribution networks makes seasonal crops available year-round in grocery stores all over the world.

Physical Methods of Food Preservation

Conditions too stressful for microbial growth can damage cells. Food environments can be manipulated to inhibit or kill microbes. Physical manipulation of foods can inhibit microbial growth, kill cells, or mechanically remove them from the food. Dehydration, refrigeration, and freezing inhibit microbial growth. Microbes can be killed by heating or ultraviolet (UV) or ionizing radiation. Non thermal energy is also lethal. Membrane filtration removes microbes from liquid foods. This chapter discusses all these physical preservation methods

Physical Dehydration Processes

Drying

When foods are being dried, hot air evaporates the water and carries it away. Both the drying temperature and the decreased water activity (a_w) affect the microbes.

During the initial period of drying, the temperature is still low and the relative humidity is high. The size and composition of the food particle determine the length of this phase. If this particle size is large and the material is dense, this phase can be long, allowing microbes to grow. During later phases of drying, the temperature is high but the relative humidity is low. This provides no opportunity for growth but is not very lethal either. The higher temperatures result in lower moisture content, and dry heat is less lethal than wet heat. If the drying lasts long enough (at least 30 min.), there are time-temperature combinations that kill microbial cells. With certain drying methods, the surface temperature may reach 100°C, while internal temperature remains lower. This kills surface microbes, but not those in the food’s interior.

Most traditional food processing techniques like boiling, cooling, freezing, and blanching are used in a home kitchen. But now-a-days, food processing and preservation industries combine these techniques with other processing operations by using different technical prospects. As a subset of traditional processing technologies, modern processing technologies include hot air sterilization, vacuum cooking and pulsed electric-field technology as well as high pressure treatment, extrusion, microwave processing, and pulsed electric field technology.

    1.    Food : defined as something which is eaten / drunk by human beings or something we eat and which can be utilized by our body.

    2.    Milk and milk products like Dahi, yoghurt, paneer, cheese, Khoa etc these foods are rich sources of Vitamin A, Riboflavin and Calcium.

    3.    Meat, fish, poultry etc besides proteins these foods also provide Iron and B- complex Vitamins.

    4.    Eggs and egg products are also rich in Iron, Vitamin A and Riboflavin (B1).

    5.    Pulses, nuts and oil seeds are also a good source of thiamin, niacin, and Iron.

    6.    Strategies and measures for alleviating the world food problem require.

Storage Systems

    1.    Low cost storage technology

        ·    In situ : Means delaying the harvest until the crop is required and employed 
    for the root crops.
        ·    Sand and Coir : Used for the Potatoes
        ·    Pits used for the Potatoes
        ·    Clamps used for the Potatoes
             Wind breaks used for the Onions – 6 months 1m height wooden stakes
        ·    Cellars : under ground / partly under ground. Ex: Apples, cabbage, 
    onions and potatoes during winter.
        ·    Barns : In Sudan onions are stored in palm leaf barns called “Rakubas”.
        ·    Evaporative Coolers
        ·    Zero energy cooling chambers
        ·    Night ventilation.

    2.    As a general rule, air circulation of storage room is designed to provide about 25m² / min / 3000 K cal of refrigeration predicated on a 5.5ºC

    3.    Frozen storage refers to storage at temperature where food is maintained in frozen conditions.

    4.    Good frozen storage generally means - 18ºC / below.

    5.    Below – 9.4ºC, there is no significant growth of microorganisms in food.

    1.    Microbial Risk Assessment (MRA) can be considered a tool for use in the management of the risks posed by food borne pathogens and in the elaboration of standards for food in international trade.

    2.    MRA comprises risk assessments of particular pathogen - commodity combinations

    3.    According to codex alimentarious commission (CAC) microbial risk assessment is defined as a scientifically based process consisting of 4 components.

        ·    Hazard identification
        ·    Exposure assessment
        ·    Hazard characterization
        ·    Risk characterization

Food Processing Technology

    1.    The transition from solid to fluid and back is known as a phase transition and this is important in many types of food processing (e.g. water to water vapour in evaporation and distillation and dehydration; water to ice in freezing and freeze drying or freeze concentration or crystallisation of fats.
 
    2.    Phase transition takes place isothermally at the phase transition temperature by release or absorption of latent heat, and can be represented by a phase diagram.

    3.    A second type of transition, known as glass transition, takes place without the release or absorption of latent heat and involves the transition of a food to an amorphous glass state at its glass transition temperature.

    4.    The transition is dependent on the temperature of the food, time, and the moisture content of the food.

    5.    The density of a material is equal to its mass divided by its volume and has units of kgm^-3

1.1 Introduction

Due to the ever increasing world population, the demand for food would also increase. India is one of the largest food producer countries of the world (first in milk production, second largest in fruit and vegetable production and third largest in grains production). It is the seventh-largest country in the world, with a total land area of 3,287,263 square kilometres. India has varied climates of snow covered Himalayas, desserts, oceans, fertile plains and areas receiving the highest rainfall in the world. Name any food item; it can be grown in one or the other part of the country. All these make the production of various types of foods of plant (fruits, vegetables, cereals, pulses, oilseeds, spices etc) as well as animal origin (fish, meat, milk etc.) possible in the country. The annual production of cereals, fruits and vegetables is 260, 57 and 77 million tonnes respectively, besides this, the production of cow and buffalo milk is about 102.1 million tonnes and that of sugarcane and spices are 355.52 and 1.1 million tonnes respectively [15]. Table 1 shows that the production of various food items has increased many folds during the last five decades. On one hand, we feel proud as we produce one of the largest quantities of foods in the world and there has been an enormous rise in the production of various foods in India during the last five decades, on the other hand we should be very much worried being a leading country as far as the wastage of food in the world is concerned. The postharvest losses are huge and only meagre quantity (2%) of the food is processed. Sharma [41] very rightly said that when we do not agree to throw away Rs 4000/-per month out of a salary of Rs 10,000/-per month then why do we accept 40% postproduction losses of food in the country. This would require immediate necessary action to save a major portion of the food that has already been produced.

12.1 Introduction

Man is the most beautiful of all God’s creations and like man, his environment too is beautiful with rivers to quench his thirst with sweet water, atmosphere to provide him oxygen, land and fire to provide him food. Primitive man ate uncooked food and lived in caves. Soon he learnt the use of firewood for cooking of raw meat and provided the first instance of ‘Pollution from food processing’ in history. As man shifted from one place to another, this sort of living never polluted the environment. But as the man ascended the ladder of civiliz ation, his needs grew in arithmeti c progression but corresponding pollution grew in geometric progression. With increase in agriculture produce, a need was felt to preserve the glut production in the form of processed foods giving rise to massive development of food processing industries all over the world. The rapid industrialization of agriculture and horticulture, increased the pollution load many folds especially the biodegradable waste from food industry [41].The wineries and distilleries (distill wine to make brandy) are no exception. Nevertheless, the waste is a precious source of several useful materials as such or after fermentation [1,31,46,86]. Thus, development and environment are two sides of the same coin.

From time immemorial, the biosphere is acting as a sink for all the waste products and recycles them to make good the loss so that every generation finds it the same as one before it. But, of late, this self-cleaning and equilibrium maintenance of biosphere is disastrously disturbed as the waste produced from man’s activities is continuously exceeding the capacity to purify herself. Consequently, our biosphere is becoming more and more poisonous and days are not far away when this planet will become inhabitable.

Previous Year Questions
1. How has food production, incuding  horticultural crops, changed in  India during the last one decade? Write down its impact on food and nutritional security (20 marks, CSE 2023)
2. What is the food production and consumption pattern of India in the last fifty years? (15M, CSE 2021) 
3. Describe food grain production and consumption trends in India (7.5M, CSE 2019) 
4. Food production and consumption trends in India (12.5M, CSE 2015)

Henderson et al., (2010) have studied the different aspects of food regulation. The authors have looked into the perceptions of Australian consumers’ who is and should be responsible for food safety. Forty-seven participants were interviewed as part of a larger study on trust in the food system. Participants associate food governance with government, industry and the individual. While few participants can name the national food regulator, there is a strong belief that the government is responsible for regulating the quality and safety of food. Personal responsibility for food safety practices was also identified. Little evidence is found in the politicisation of food, reflecting a level of trust in the Australian food governance system that may arise from a lack of exposure to major food scares. According to Wood (1990) the marketing of food service program in an Ohio district is directed toward the students and also at the community, school administrators, teachers, and employees. Students are encouraged to follow a healthier way of eating.Jones (1998) studied the role of food safety in the food chain from farm to fork. In response to growing threat of food-borne illnesses the federal government had launched the Food Safety Initiative. A key element is the Hazard Analysis Critical Control Point’s system (HACCP). Under this it has been designed to make everyone in the food-delivery chain to be responsible for ensuring a safe food supply.

Over the past several years, there has been significant change in consumer perception on quality and food safety. Consumers are demanding healthy, nutritious and cost-effective products processed under controlled hygienic conditions. Food safety concern, in recent years, has become dominant and important. The requirement of food safety and quality assurance has never been so demanding as it is now. Globally food safety is being addressed independent of food quality. In anticipation of consumer demands on food safety, food sanitary standards at national and international levels are under constant review. Several inter governmental agencies / organizations are engaged in work related to quality assurance and food safety. Amongst these World Health Organization (WHO) and Codex Alimentarius Commission (CAC) play the major role in protecting public health and defining standards of quality and safety aspects of foods for regional and or world wide usage.

Regulatory Institutions

The quality environment in the Indian food processing sector revolves around compulsory legislation which specify minimum standard and certification system. Legal standards are generally made to have control over the quality of foods offered for sale and to safeguard the consumer from health hazards posed by practice of adulteration. There are basically three types of Indian standards namely

Over the past several years, there has been significant change in consumer perception on quality and food safety. Consumers are demanding healthy, nutritious and cost-effective products processed under controlled hygienic conditions. Food safety concern, in recent years, has become dominant and important. The requirement of food safety and quality assurance has never been so demanding as it is now. Globally food safety is being addressed independent of food quality. In anticipation of consumer demands on food safety, food sanitary standards at national and international levels are under constant review. Several inter governmental agencies/organizations are engaged in work related to quality assurance and food safety. Amongst these World Health Organization (WHO) and Codex Alimentarius Commission (CAC) play the major role in protecting public health and defining standards of quality and safety aspects of foods for regional and or world wide usage.

Hazard Analysis and Critical Control Point (HACCP) System

1. Identify hazards
 
 It is important to be able to identify the possible microbiological, chemical and physical hazards that can occur at every stage of the food business – from growth, processing, manufacture, storage and distribution, until the point where it is sold to the customer and eaten.

    ·    Microbiological Hazards : Any bacterium, virus, or protozoan that is capable of causing illness and that grows or may be carried on food. Well-known examples of bacteria are Campylobacter, Listeria and Salmonella. The most likely food-borne viruses are the Norwalk type viruses. Giardia is an example of a protozoan that may be food borne. It is important to have some understanding of the risks associated with different types of microbiological hazards.

    ·    Chemical Hazards : Examples include excessive or toxic amounts of heavy metals, chemicals, pesticides, herbicides, insecticides, vitamins, minerals, preservatives, disinfectants, detergents and cleaning compounds. Some hazards may be naturally present such as in green potatoes or taro and rhubarb leaves.

    ·    Physical Hazards : Objects that get into food, or are already present in food, may cause illness, injury or distress to the person eating it. Some examples are glass, metal fragments etc. Other contaminants such as hair or insects may be offensive but not necessarily a danger to health. They should nonetheless be considered and controlled

India is emerging as a food power in the international trade of foods. The immense un-tapped potential in the food processing sector in India has to be still exploited. It has been termed as ‘sun rise industry’ for improving agricultural productivity and enhancing food availability. The terms food quality management and food safety have assumed large dimensions today. In the international trade of foods, specifications have been laid down on the levels of harmful substances (chemical or biological origin), protocols have been documented on their detection and quantification in foods. We have to meet these international standards to export processed food and earn foreign exchange. The future of Indian food processing sector is bright provided it improves the quality of its products as per international standards.

Introduction

Food and water safety is a public health concern. “It is health that is real wealth and not pieces of gold and silver” is a famous quote by Mahatma Gandhi. To provide good health and to maintain it properly for all citizens, the country need to assure the quality and safety of food consumed by it's population (Attrey, 2016). Apart from nutrition and taste, a more important part of food is the safety standards during manufacture, storage, distribution, sale and import. Food safety is particularly important in India, where an inordinately high percentage of population suffer from malnutrition and food borne diseases (Bahuguna, 2016). Food borne diseases in India have increased the frequency of mortality and morbidity. Around 5.82 crore cases of food borne diseases and 3.51 lakh food associated deaths were reported in 2010. Nowadays the consumption of unsafe food is being considered as an alarming threat to the growing global food markets. Adulteration and synthetic milk in India, powdered infant formula with melamine in China and adulteration of beef in Europe are a few examples. These issues can be resolved to a great extent, through appropriate food laws and policies. A country should not only possess appropriate statutory, regulatory legislations, policies in place for the su-pply of safe and good quality food at all times, but also should assure that the same is imple-mented seriously (Attrey, 2017).

Apart from health, food safety is vital for economic growth and progress as well. In India, the food processing industry holds tremendous opportunity. It has high employment potential, can boost exports of agro-products out of the country and also provide better returns to farmers for their produce. The concept of food quality and food laws is not totally new in India because food was considered an important aspect of healthy living even in ancient India. India took an important step towards building a safe food culture a decade ago by enacting the Food Safety and Standards (FSS) Act. In one stroke, it brought about a paradigm shift in the way we look at food safety regulations in India. Food Safety and Standards Authority of India (FSSAI) are mandated under Food Safety and Standards Act 2006 to protect people from this threat. In its role of a food regulator, FSSAI can be proud that it touches the lives of each of the 1.3 billion people in the country. More than just reaching the people, the watchful eye of FSSAI is assuring them that the food they get in any form, raw or processed is safe to consume (Agarwal, 2016).

Food Safety and Standards Rules and Regulations-2009

    1.    The Food Safety and Standards Act, 2006 has been passed by the Parliament with the intention to integrate all present food laws into one and to have a single regulatory body.

    2.    Accordingly the Food Safety and Standards Authority of India (FSSAI) has been established under the Food Safety and Standards Act, 2006 (FSS Act, 2006) with the mandate to lay down science based standards for articles of food and to regulate their manufacture, storage, distribution, sale and import, to ensure availability of safe and wholesome food for human consumption.

    3.    In exercise of the powers conferred by section 91 of the Food Safety and Standards Act, 2006 (34 of 2006), the Central Government hereby makes the rules and regulations.

    4.    ‘‘Anti-oxidant’’ means a substance which when added to food retards or prevents oxidative deterioration of food and does not include sugar, cereal, oils, flours, herbs and spices.

History of food safety starts with knowledge about food hazards. The term “safe food” can be defined from different angles since the end users are highly heterogeneous. However, the accumulating data and day by day emerging information aboutfood borne diseaseslead to a boom in public awareness about food safety. Food safety can be defined as “The strategies and activities aimed to protect foods from biological, chemical, physical, and allergenic hazards that may occur during all stages of production, distribution, and consumption” (Paperella, 2020). According to the World Health Organization (WHO), unsafe food,which contains hazardousmicroorganisms or chemicals, causesmore than 200 ailments, ranging from diarrhoea to malignancies among which diarrhoea is common. 

Introduction

Milk, an integral component of our staple diet is nature's most ideal and complete food. There is a long history and tradition of high consumption of dairy products in India. Consumption pattern of dairy products in India is quite unique and is centred on traditional products; however, novel products are gradually gaining momentum in urban areas. Despite being the largest milk producing country in the world, India accounts for a negligible share in the worldwide dairy trade. Domestic demand for dairy products is showing an increasing trend and it is expected that demand-supply gap will further widen which might transform India being a net importer of dairy products. The domestic demand for dairy products is showing an increasing trend and it is expected that demand-supply gap will get further widened. India, world’s largest milk producer has enough scope for diversified value addition as this can definitely assure a better margin of profit. However, for this, one has to maintain reputation and competitiveness in the market. To emerge as a leader in this competitive global market, continuous improvement of quality is highly essential. Safety, just as the other side of the coin is also of utmost importance to reinforce consumer confidence. Nowadays, quality is not a matter of choice but a necessity and even a responsibility of all stake holders. In the case of food, the term, 'Quality' refers to physical, chemical, microbiological, technological, economic and aesthetic characteristics. From consumer point of view, the word, 'Quality' embraces mostly the organoleptic characteristics like body, texture and flavour than the objective properties like fat, protein, lactose and acidity as determined by science based tests.

Food is a resource of immense importance and its safety in the whole production and supply chain, is very crucial. In the last century, drastic increase in the incidence of food borne illnesses, large-scale food poisoning outbreaks and surfacing of new foodborne pathogens and hazards were widely reported. Contaminants can enter food through various pathways in the food production process, and can occur naturally or as the result of inferior or inadequate production practices. Concerns on food safety are fuelled by the industrialization of agricultural production, liberalization of trade, tourism, food consumption pattern and food preparation practices. The availability of information through the mass and social media increases the number of reported cases of inadequate food safety. International competitiveness depends more on quality and safety concerns than on prices and this creates a need for safer food production and distribution practices.

Growing population has increased the demand on food supply. Providing safe and hygienic food to the population is an essential consideration. Food safety systems and tools need to be in place to assure safe food, until which the food businesses would not flourish or be able to build their reputation. Food safety systems and management tools are important as they assist food business organizations to build confidence in people regarding food safety.

Cooking oil when heated there will be some changes like its colour, flavour, smoke formation etc. One change is the change in total polar compounds (TPC). TPC is used to measure the quality of oil. The TPC value increases with the reheating of oil, higher TPC value means the oil having high contain of peroxide and hydro peroxide. FSSAI fixed the value of TPC at 25%, beyond of this value the cooking oil can causes health issues like hypertension, atherosclerosis, Alzheimer’s disease , liver disease even liver cancer.

Food safety is a discipline ensuring safe consumption of food without any injuries to human health. It is multifaceted and influenced by various factors including, food processing, handling and practices, consumer demand and their knowledge, globalization of world food trade, changes in food consumption pattern (Chen et al., 2020).

Previous Year Questions

1. CS 2015: Discuss the impact of rapid increase in population on food and agriculture (12.5 marks)

What is Food security?

The Food and Agricultural Organization (FAO) – “when all people at all times have physical and economic access to sufficient, safe and nutritious food to meet their dietary needs and food preferences for an active and healthy life”.

It has Following Dimensions

• Availability: It means food production within the country, food imports and the stock stored in government granaries.

Food is essential for human survival. It provides the required energy and vital nutrients for sustainable growth and development. With the increase in population and awareness, the demand for nutritious, fresh and healthy food also increases. Although adequate food is produced in order to meet the increased demands, it fails to reach the consumers in need due to food Food Storage and Preservation Practices   35 wastage and spoilage occurring during various stages of harvesting, food production, storage and transportation. Gajanana et al., (2009) stated that there is a mammoth wastage of food post-harvest. It is estimated that 20 to 60 % of produce are wasted during and after post-harvest. 

Importance of Food Storage

Food storage is both a traditional domestic skill and is important industrially. Food is stored by almost every human society and by many animals. Storing of food has several main purposes:

•Storage of harvested and processed plant and animal food products for distribution to consumers

•Enabling a better balanced diet throughout the year

•Reducing kitchen waste by preserving unused or uneaten food for later use

•Preserving pantry food, such as spices or dry ingredients like rice and flour, for eventual use in cooking

•Preparedness for catastrophes, emergencies and periods of food scarcity or famine

•Religious reasons (Example: LDS Church leaders instruct church members to store food)

•Protection from animals or theft

Introduction

    1.    Food Science is the application of the physical, biological and behavioral science to the processing and marketing of foods (Margaret, 1968).

    2.    Technology can be defined as the science dealing with knowledge of doing things efficiently and effectively.

    3.    Food science helps us understand the theory example: what methods can best be used to store and preserve food to maintain quality and prevent spoilage.

    4.    Food technology demonstrates how the food is stored, preserved, processed and transported and has been responsible for development of new techniques for processing and preservation of food on a commercial scale and for packaging it in such a way that it can be sold conveniently.

    5.    Food science deals with the study of facts of the physical, chemical and biological sciences as they influence the processing and preservation of food.

    6.    Food technology deals with engineering and other scientific and technical problems involved in transforming edible raw materials and other ingredients into safe, nutritious and appetizing food products (Desrosier, 1977).

    7.    Food science is concerned with basic scientific facts about food, where as food technology concerned with the processing of raw materials into foods that meet human needs and wants.

    8.    Indian agriculture has undergone a sea change during the past half a century. Starting with the campaign for “grow more foods” in the forties, India reached self sufficiency during the eighties.

The proximate system of analysis consists of the analytical determinations of water (moisture), ash, crude fat (ether extract), crude protein and crude fibre. Nitrogen-free extract (NFE), more or less representing sugars and starches, is calculated by difference rather than measured by analysis.

Water

1. Water constitutes about 70 percent of an adult’s body weight and water (moisture) is the predominant constituent in many foods.
2. All foods contain varying amounts of water in the range of 20 to 90%.
3. The hypothalamus is a brain center that controls activities such as maintenance of water balance, regulation of body temperature, and control of appetite.
4. Moisture content of some foods

Introduction

Food adulteration compromises quality of foods and causes human health hazards is a menace mankind had been facing since ages. Spice adulteration scandals in the year 2004, Horse gate scandal in Europe during 2013 are famous examples of food fraud. Various forms of food adulteration and cheating such as substitution of cheaper food components in place of original product, addition of non-permitted substances, and false claims by misbranding or mislabeling are prevalent from time immemorial (Spink et al 2019).

Food fortification is the procedure in which micronutrients (essential trace elements and vitamins) are added to the food. As a public health policy fortification can be carried out by the food manufacturers or by the governments to help people in combatting dietary deficiencies within a population. Fortification can be done in food even if these nutrients are originally present or not. However, it improves the nutritional status of a population by overcoming the deficiencies of micronutrients. Deficiency of micronutrients is known as hidden hunger which is a serious health risk. Access to safe and nutritious food is a must.Due to the lack of consumption of a balanced diet, adequate micronutrients are not supplied to the body. Therefore, there is a considerable loss of nutrients during the processing of food. One of the strategies to address this problem is fortification of food.

Food preservation methods are important in order to avoid glut or shortage of food in the market. In addition it helps to increase the shelf life, maintain the nutritional and sensorial quality, facilitate transportation and improve the overall value of the commodity. Even though various methods of food preservation are available now. Most of the conventional methods are thermal preservation methods which may result in the loss of volatile nutrients and flavour, different sensorial modifications, microbial spread with or without gas production, damage to the microstructure, rupture of coating or packaging surfaces and microbial recontamination caused by non-hermetic closure.

INTRODUCTION

Preservation of food by drying or chemical means as by alcohol or acid fermentation and that by the use of ice is long recorded in history. With the advancement of science and the knowledge governing various unit operations in food processing, these food preservation techniques employing thermal, radiation, or low temperature or a combination of these have only got further refined as regards their viability and commercial applications. Process foods of different genre and cuisine, which include frozen foods too, are increasingly becoming popular the world over for reasons of quality, safety and year round supply of nutritious foods to cater to different niche segments of human society. Increasing health consciousness is buoying those processed foods which are preserved and stabilized using non-thermal technologies as these ensure retention of food nutrients to a better definition. Interest in frozen food also stems from need to deliver safe and nutritious foods with extended shelf-lives.

1. Introduction

Freezing is a method of food preservation that involves lowering the temperature below the freezing point of food generally -18 °C or below. During freezing of food the water present in them changes its state to form ice crystals. Human beings in the colder regions have used freezing as a means of preservation since they learnt hunting and gathering foods. The foundation of the modern frozen industry was laid in mid 1920 when Clarence Frank Birdseye, an American inventor used cold brine solution to chill packaged fish and extended it further for quick freezing of meat poultry fruit and vegetables. 

4.1 Introduction

A huge amount of waste in the form of liquid and solid is produced in the fruit and vegetable processing industry which causes pollution problem if not utilized or disposed off properly. Generally solid waste is dumped in local landfills, eaten and scattered by stray animals, which has now become a major cause of environmental pollution. The waste obtained from fruit processing industry is extremely diverse due to the use of wide variety of fruits and vegetables, the broad range of processes and the multiplicity of the product [79]. The solid waste from fruits and vegetables includes peel, stone, rag, seed, core etc is of economic value and can be used for manufacturing of various by-products [21]. The extent of the waste produced from processing industries of some of the important fruits and vegetables, is given in Table 1.

In India, utilization of fruits and vegetables for processing is hardly 1.8% of the total production. There were 5166 processing units till 1^st Jan, 2009 of fruits and vegetables products throughout the country. About 90% of these units are small scale units with annual production limit of 50-250 tonnes. These units have no organized methods of waste disposal. In certain places this waste is taken away by farmers for their disposal as cattle feed or field manure.

10.1 Introduction

Edible oil production is a separate sector of the food processing industry. There are several species of plants in the world whose oil can be utilized for human consumption for edible and non-edible uses. Though around 40 oilseeds are known, only around a dozen oilseed crops have become commercially important including ten seed crops and three tree crops. These oil seed crops (mostly annual) of commercial importance are groundnut, rapeseed-mustard, sesame, soybean, sunflower, cottonseed, safflower, niger, castor and linseed. The three major tree oil crops are palm, olive and coconut [63]. Besides these, the kernels of some other tree crops i.e. apricot, almond, walnut, hazelnut, olive (fruits are used), peach, can also be utilized for oil extraction purposes for edible and non-edible uses. Besides oil of the oilseed crops, the oils of tree fruits and kernels are also becoming popular very fast for various food, pharmaceutical and cosmetic industries.

Large scale requirement and local shortages of oils for various edible and non-edible uses have prompted the identification of many new sources of oil during the last few decades. They are ricebran, corn, sal, mahua, jatropha, kokum, melia, rubber, mango kernel, kusum, simarouba, neem, karanj, crambe, moringa, tumba, jojoba and tobacco seed etc. Most of these oilseeds and their products have wide utility in the specialty oils sector and are mostly used for non-edible purposes. Soaps and detergents, paint and varnish, lubricants, pesticides and medicines, cosmetics, bio-diesel fuel industry are the major consumers of these non-traditional oilseeds. All the oil crops will gain greater attention in future as they are renewable and biodegradable in nature [63]. List of oil crops have been given in Table 1.

Importance of Fruits and Vegetables in Human Life

Fruit is the edible, and more or less juicy, product of a tree or plant and consist of the matured ovary including its seeds and adjacent parts. Usually fruits are sweet, with a wide range of flavours, colours and textures.

Composition

Fruits are very poor source of protein and fat. Avocado is the exception containing 28% fat. Fruits contain high amount of moisture hence they are highly perishable. They are also good source of fiber. Fruits are not very good sources of calories. Fruits like bananas give fairly good amount of calories. Ripe fruit contains a higher percentage of sugar than unripe fruit does and the sugar is chief in the form of sucrose, fructose and glucose. Generally fruits are poor source of iron, Mangoes are excellent source of carotenes. Oranges are fairly good source of beta carotene. Guavas are the best source of vitamin C. Citrus fruits are good source of vitamin C. Cashew fruits are inexpensive and rich in vitamin C, although there is variation of vitamin content from fruit to fruit most fruits in the raw state contain some ascorbic acid. If fruits are bruised, peeled, cooked or exposed to air, large amounts of the vitamin may be oxidized. Apples are not only expensive; they contribute little to the nutritive value. They give fiber to the diet.

    1.    Vegetables are less acidic than fruits and food poisoning bacteria are able to grow in many vegetable products

    2.    Different levels of acidity in fruits

    3.    Water for cleaning of fruits and vegetables should contain about 200 ppm of chlorine (by mixing 1 litre of bleach into 250 litres of water)

    4.    Water that is used as an ingredient in fruits and vegetable product should not contain more than 0.5 ppm chlorine (by adding 2.5 ml of bleach to 250 litres of water), to avoid contaminating products with a chlorine smell

Horticulture is increasingly recognized as a sunrise sector, owing to its potential to raise farm income, provide livelihood security and earn foreign exchange through export. The diverse agro-climatic conditions and rich diversity in crops and genetic resources enable India to produce a wide range of horticultural crops round the year. To cite an example, India produces tropical fruit like mango and sub-tropical fruit like an apple at the same season in a year (Jha et al., 2019). The horticulture sector encompasses a wide range of crops like fruits, vegetables, flowers, spices, plantation crops like coconut, beverages like tea and coffee, and some medicinal and aromatic plants. Statistics provided by National Horticulture Development Board showed that India is the second largest producer of the commodities, after China, accounting for 13 per cent of the global production of fruits and 21 per cent of vegetables. (DAC&FW, 2017).

Economic reforms and policies further increased the speed of diversification in favor of horticulture crops (Jha et al., 2019). This is on account of the increased domestic demand from high-value food commodities as well as for export markets. The diversification process that is seen within the agricultural sector also got transmitted to the horticultural sector. In line with the emerging demands, India has taken several technical and policy initiatives for promoting horticulture. The most important among is the newer technology packages spanning from production to postharvest (Jha et al., 2019).

Safe Food means

• It is not injurious to health
• It does not contain any filthy, rotten, decomposed or diseased animal
• substance or vegetable substance
• It is produced undermost hygienic conditions to produce/manufacture it, inferior or cheaper ingredients/raw materials are not used
• Food additives/processing aids used are permitted and are within prescribed limits.
• It is not misbranded

Labelling is a critical component of food regulation, consumer communication, traceability, and brand credibility. This chapter examines the regulatory requirements governing ice cream and frozen dessert labelling in India, with emphasis on FSSAI standards and declarations. It explains the distinction between product standards and label declarations and introduces systems for managing recipe masters, nutrition information, label copy, artwork, and packaging approvals. Mandatory declarations, ingredient information, allergen declarations, nutritional information, claims, and common labelling errors are considered. The chapter also identifies departmental responsibilities and best practices for label compliance. Proper regulatory control ensures accurate consumer information, reduces legal risk, and supports consistent packaging and commercial operations.

Abstract

A functional food is defined as food that provides health benefit beyond the basic nutrition. Such foods reduce risk of high blood pressure, coronary heart disease, osteoporosis, cancer and dental caries. Consumers’ increasing interest for maintaining or improving their health by eating specific food items has led to the development of many new functional foods including dairy products. These functional dairy foods contain some functional ingredients that decrease the absorption of cholesterol, reduce blood pressure and play role in regulation of satiety and have antimicrobial effects. Milk is a good source of fat, protein and minerals. It also contains several intrinsic functional components like melatonin, conjugated linoleic acid etc. in amounts lower than the body requirements. Fermented dairy products contain probiotics with special health benefits. Functional dairy foods could be produced with the addition and/or generation of functional components. Some examples include milk, yogurts and cheese enriched with conjugated linoleic acid or plant stanols/sterols to help reduce the risk of heart disease. Fermented dairy foods possess various nutritional and therapeutic properties. Lactic acid bacteria (LAB) play a major role in determining the positive health effects of fermented milks and related products. Dairy products with probiotics and prebiotics enhance digestive health, prevent colon cancer, help in lowering blood pressure and improve immune functions. Melatonin is important in curing of sleep disturbance and enhancement of alertness. Milk derived peptides have immunological, antimicrobial, ACE-inhibitory activity/antihypertensive, anti-carcinogenic and antioxidant activity. The aspects of functional dairy foods will be presented in detail.

Introduction

In terms of individual health and physical condition, the situation in modern society is rather giving rise to concern. The last decades have seen a tremendous increase in availability and variety of food products which has undoubtedly affected the food habits of the average individual. Despite the fact that food has become overall safer and increased accessibility allows for healthier diets, worrying we are nevertheless faced nowadays with diet- related diseases of proper epidemic proportions. We now encounter an epidemic of obesity that spreads not only to the majority of the adult population but also, more worryingly, to young people who have rarely the option of alternative diets. Moreover, as scientific proofs for the link between diet and disease (particularly cardiovascular diseases and some cancers) accumulate, action is urgently needed. There are an increasing number of calls for action. It is within this situation that functional foods have developed. They assume a highly targeted solution to the diet related diseases with effective reduction of risk and improved physical and mental well being. That represents a big step from the traditional food-for-nutrition but the scientific milieu is ready to take the chances. The emerging ‘functional food science’ is focusing research on the effects of functional foods on growth, development, metabolism, the cardiovascular system, intestinal physiology, and even on behavioural and psychological functions (FAIR, 2000, Vol. 1). In view of these facts, it should appear necessary to assess and evaluate the developments in food production in terms of their effect on the individual consumer and the society at large.

Abstract

Food is basic need of human for its existence. Food is a source of nutrients needed for growth, energy and protection. There are number of chemical compounds not considered as nutrients but has positive effect on health. There is a need to look into the health benefits of the food components. Many lifestyle diseases are caused by the unhealthy food habits. Developments in science have led to establish the link between food intake and healthy living. Non-nutrient compounds of food are also called phyto-chemicals. Functional foods are prepared by increasing a particular nutrient or phyto-chemical to get health benefits. The increased cost of health care and drugs trigger the developments in this area. The approximate global market size is 30 billion US$ while Japan, United States, and Europe are the leaders in functional foods. FICCI has reported that functional food market in India is worth Rs 4,400 crore with growth rate of 21%per annum.

Introduction

The food has been considered as source of nutrients in the past but increasing evidences has proved that particular types of food can help in preventing the diseases. The World Health Organization (WHO) has reported that deaths due to Non-Communicable diseases are increasing in South East Asian counties; where as CMPN (Communicable, Maternity, Prenatal, and Nutrition) are

Production: According to Food and Agriculture Organization (FAO) of United Nation, the global production of fruits and vegetables including melons was 638 and 1090 million metric tons while India produced 75 and 106 million metric tons in 2011. In addition to this, the world production of roots and tuber was 810 million metric tons whereas India produced 51 million metric tons in 2011. It indicates that fruits and vegetables form an important part of the diet in the world including India. There is an ample opportunity to manufacture various health promoting products based on fruits and vegetables. A number of Fruits and Vegetable based functional food that can be prepared and presented in (Table 1) indicates the role of fruits and vegetables in the nutraceutical production for their health benefits.

Introduction
 
Cardiovascular disease (CVD) is still a major cause of death in Western populations and is becoming an important cause of morbidity and mortality worldwide. Thanks to advanced medical knowledge and treatments, many patients survive an initial event. Because of that, prevention of secondary CVD is a growing task for nutritionists and other health professionals. Cardiovascular risk can be reduced by lifestyle changes, one of which is diet. There is now substantial evidence from epidemiological and clinical studies that a diet rich in fruits, vegetables, unrefined grains, fish and low-fat dairy products, and low in saturated fats and sodium, can reduce the risk of coronary heart disease and hypertension.

Introduction
 
Diabetes shows a wide range of variation in prevalence around the world and it is expected to affect 300 million by the year 2025. In a prevention framework where banning policies and educational strategies lead the interventions, functional foods (FFs) with their specific health effects could, in the future, indicate a new mode of thinking about the relationships between food and health in everyday life. Functional ingredients, such as stevioside, cinnamon, bitter melon, garlic and onion, ginseng, Gymnema sylvestre and fenugreek, have been addressed for their specific actions towards different reactions involved in diabetes development. New strategies involving the use of FF should be validated through large scale population trials, considering validated surrogate end points to evaluate the effect of FF in prevention of chronic diseases such as type 2 diabetes mellitus.

Introduction

The search for weight controlling foods began in the mid 19^th century when industrialization led to widespread obesity. Over the years, people have tried to lose weight by avoiding particular food groups like carbohydrates, eating specific foods such as cabbage soup, or adding a certain ingredient, like vinegar or grapefruit to each meal. Recently scientists have demonstrated that green tea, dairy products, and cinnamon have the potential to improve weight control by altering fat and/or carbohydrate metabolism at the sub-cellular level. Considerable research is needed, however, before these food items can be used to develop effective weight management products.

Introduction

In recent years, food scientists, nutritionists and health experts have become more inclined towards functional food components present in various food sources due to their positive influence on health, which is beyond providing the basic nutrition.Nowa days, generalconsumers are also seeking healthier food options because of nutritive food habits and awareness. Therefore, it has triggered the studyof food and deep mining of food components from nutritional and health benefit’s perspective also. Functional food ingredient can be defined as any componentwhich is more than a source of nutrient i.e. provides additional specific health benefits. Milk is well known to exert positive effect on human health, provides nutrition and widely consumed all across the globe in form of either milk or milk products. As per the definition, milk is heterogeneous blend of lacteal secretion which contains various elements that displays wide range of chemical and functional activities. It has been more than a source nutrition and supplement to different age groups either neonates, youngsters or grown up peoples (Park, 2009). It is one of the basicelements of many diets either in its native form or fermented form which every class of people can afford and had evolved as one of the important nourishment sources. Milk in its native form contains fewer bioactive components while fermentation process produces numerous secondary metabolites which possess various health-beneficial properties (Stanton et al., 2005).