eChapters

Aseptic packaging is a specialized and advanced method used to extend the shelf life of perishable foods without the need for refrigeration. This technique involves sterilizing both the food product and the packaging material separately and then filling and sealing the product in a sterile environment. Aseptic packaging has transformed the food industry, allowing products such as dairy, juices, soups, and sauces to remain fresh and safe at room temperature for extended periods. The ability to maintain product quality, nutritional value, and safety while reducing reliance on cold storage has made aseptic packaging a preferred choice in both food manufacturing and distribution. The process of aseptic packaging is both complex and precise, as it requires thorough sterilization of every component to ensure food safety. Packaging materials, typically a combination of paper, plastic, and aluminum, are carefully selected to withstand high temperatures while providing an effective barrier against contamination. This chapter explores the principles of aseptic packaging, its significance in food preservation, and the advanced technologies and materials used to achieve and maintain sterility in packaged foods.

7.1. Introduction

In the modem lifestyle, people are extremely busy in their work and lack the time to cook their own foods. They mainly depend upon processed and packaged food for their nutritional intake. So it becomes essential that the packaged products should be safe, hygienic and shelf stable. To preserve the food for long duration, thermal processing is most suitable method. Aseptic packaging is a form of thermal food processing. Aseptic packaging can be defined as the filling of sterile containers with a commercially sterile product under sterile conditions and then sealing the containers so that reinfection is prevented; that is, they are hermetically sealed. 

The inorganic residue remaining after the destruction/burning of organic matter in foodstuffs is called ash. Ash contents in food commodities roughly represent the mineral contents, however, some minerals are likely to be lost due to volatilization or some interaction between constituents during ashing. Estimation of ash content is also used as a measure to judge the quality of fruit products. The presence of high ash content or low alkalinity of the suggests the presence of adulterants in the sample. Similarly, the presence of a high amount of acid-insoluble ash indicates the presence of sand and other silicious matter in the food products.
Principle
Organic matter is burnt off at as low a temperature as possible. Heating is done in stages, first to char the product thoroughly and finally to ash it at 550ºC in a muffle furnace. The inorganic material left after burning organic matter is cooled and weighed.
Apparatus
* Silica Crucibles
* Muffle furnace
* Desiccator
* Balance

According to Indian Philosophy (Bhat, 2012) the physical body is called Annamaya Kosha.A body, when well nourished grows well by absorbing the energies from the food consumed. Fasting is another aspect of traditional food system. It is meant to purify the mind and the body.

Concept: It’s a natural process that modifies the cytology, physiology, biochemistry, and physical characteristics of seeds. These modifications lower viability and ultimately result in the seed’s death. A decline in the proportion of germination indicates degradation, and weak seedlings are produced by seeds that do germinate. The factors that impact the ability of seed to be stored include the seed’s quality at the time of storage, its pre-storage history (environmental factors during pre- and post-harvest stages), its moisture content or ambient relative humidity, the temperature of the storage environment, the amount of time the seed is stored, and biotic agents. Seed will inevitably get damaged when being stored (Balesevic-Tubic et al., 2005). The quality of the seed at the time of storage, its pre-storage history (environmental factors during pre and post-harvest stages), its moisture content or ambient relative humidity, the temperature of the storage environment, the length of time the seed is stored, and biotic agents are factors that affect the seed’s ability to be stored. Different physical changes can happen to seed during storage because of factors like temperature, moisture content, and length of storage. The viability and vigor of the seeds may be impacted by these modifications.

Introduction

Potato (Solanum tuberosum L) is one of the major starchy tuber vegetable crops of the world. It is a unique crop which can supplement the food needs of the country in a substantial manner. Today, potato is the need of life or poor man’s food in many countries including India. Potato production in India has made tremendous progress only with the development of new technologies in different fields of agriculture. It has been observed that the farmers are not adopting recommended practices and consequently not realizing the potential yield of potato. To understand the problems of farmers in the adoption of complete recommended farm practices, researchers as well as extension workers should come out with some concrete findings and suggestions, which can solve these problems. It has been seen that a large number of techniques and practices do not reach the farmer’s fields and those carried to the farmers get considerably distorted or often adopted partially with the result that farmers do not get the potential yield.

Introduction

“Quality” refers to the aesthetic appearance and freshness of fish. It also involves safety aspects such as being free from harmful bacteria, parasites or chemicals. The best quality fish is the one consumed within the first few hours after postmortem. We studied in our previous chapters that in some instances, even very fresh fish in rigor mortis are unsuitable for filleting. So, slightly older fish in post-rigor are more desirable for the processors.

The assessment methods of fish quality are divided into sensory, instrumental, chemical and microbiological. Sensory method is superior and all other methods must correlate with the results of sensory evaluation. So, sensory method must be done more scientifically under controlled conditions without the effects of test environment, personal bias, etc.

4.1. Sensory Methods

Sensory evaluation is defined as the scientific discipline used to evoke, measure, analyze and interpret reactions characteristics of fish, as perceived through the senses of sight, smell, taste, touch and hearing. There are few instruments capable of measuring sensory profile viz. Instron for texture, electronic nose for odour, microscopic imaging for structure, etc.

In sensory evaluation, appearance, odour, flavour and texture of fish are evaluated by the human senses. The process involves three steps: (1) detection of a stimulus by the human sense organs, (2) evaluation and interpretation by a mental process; and (3) the response of the assessor to the stimuli. The response of stimuli varies among individuals e.g. some people cannot taste rancid flavour and some have low response to cold-storage flavour.

Introduction

Agriculture is the main sector of the Odisha economy and contributes approximately 42% to the gross domestic product (GDP) and employs over 80% of the population. Despite its role, agricultural production is constrained by high climate variability where rainfall distribution is extremely uneven and this has negative implications for the livelihoods of people .Drought frequently results in crop failure, while high rainfall intensities result in low infiltration and high runoff causing enhanced soil erosion and land degradation. Land degradation in the form of soil erosion and declining land fertility is a serious challenge to agricultural productivity and economic growth (Lemenih, 2004).Studies indicate that the tribal district of Odisha have experienced high rates of soil erosion and deforestation, resulting in sediment accumulation in downstream reservoirs and rivers.

Introduction

Food safety and quality assumes paramount significance in any food industry. Globalization has driven both the food and agricultural firms to adopt systems that functions in a way to interlink food standards and international trade so as to achieve superior food quality and safety. Food industries follow several regional and international food safety procedures to procure certification from the government and other agencies in order to survive in both domestic and international markets (Ryan, 2014). The essential components in the food safety include handling, preparation and storing of the food products to ensure the food quality and to avoid food-borne diseases. The unwanted substances in a food product included by an accident is known as contaminants and the unwanted substance added to the food product to reduce the cost or to improve the other properties are known as adulterants. Contaminants and adulterants may lead to pathogens and toxins that pose serious concerns over the health of the consumer (Jha, 2016). The adulterants and contaminants are classified as physical adulterants and contaminants, chemical adulterants and residues, microbiological and pathogenic contaminants and toxins.

Hazards in food can be categorized into physical, chemical and biological.

Physical Hazards: Physical hazards are foreign organic or inorganic objects or extraneous materials in the food products. Hard and sharp physical hazards are of particular concern. Examples of physical hazards are broken glass, plastics, metal pieces, wood pieces, stones etc.

1. Introduction

In recent years, consumers have been demanding convenient, healthy and safe foods which have ’fresh-like’ characteristics with a long shelf-life. These demands include important food quality such as appearance, texture, taste and nutritional content which are strongly impacted by the way it is processed. Another major concern among the consumers is food safety and quality. The shelf-life of the food products are mostly influenced due to the action of various harmful microorganisms and enzymes. The conventional food processing technologies, such as thermal treatments (pasteurisation and high temperature sterilisation), evaporation, drying, frying and baking can assure the microbiological safety and/or stability of processed food products, but affects the food quality and nutrients (heat sensitive vitamins, flavour and other bioactive compounds) (Zhang et al., 2019)

Abstract

Drying is one of the most important industrial operations for preservation of food material. Due to the major limitations posed by convective drying methods, there is always a need for novel drying techniques which are technically, economically and environmentally sustainable. Based on the principle of moisture diffusion due to vapor pressure gradient, atmospheric freeze drying (AFD) offers a promising alternative to conventional drying systems. A cold gas with low water vapor pressure is used as drying medium to sublimate moisture directly from the frozen material at atmospheric pressure conditions. As a result the product gets dried at much lower temperature unlike convective drying. Thus, products dried with AFD retain better nutrition, texture and color and the process is also considerably cost effective. Major limitation of the AFD process is longer drying time, which can however be accelerated by using heat pump drying or new ultrasound technology. This chapter focuses on mechanism, benefits, limitations and comparative study of AFD with other drying methods such as hot air drying and vacuum freeze drying. It provides an insight regarding effect of AFD on properties of food material based on various studies reported in literature.

Previous Year Questions

1. No questions were asked in past 10 years

Availability of Foodgrains

• Net availability of foodgrains = Gross Production (-) seed, feed & wastage, (-) exports imports (+/-) change in stocks.

B.T.U.: It stands for British thermal unit. The heat required to raise the temperature of one pond of the water through 1oF is called BTU (Plate 82).

Baby back ribs: Meaty pork ribs cut from the lower back rib section.

Bacitracin: A polypeptide antibiotic isolated from a bacillus (Bacillus subtilis or B. licheniformis) and usually used against gram-positive bacteria.

Back Bacon / Canadian bacon: Bacon cut from the loin that has little fat and is cut into round or oblong slices.

Backward feed evaporator: In this evaporator, fresh feed enters the last and the coldest effect and continues on until the concentrated product leaves the first effect (Plate 83).

1. Introduction

Dairy industry size and demand precede all other segments of food industry. Reporting milk production of 146.3 million tonnes in 2014-15, India is currently occupying first position in world scenario (NDDB, 2015). In spite of limited shelf-life, milk offers various opportunities of product diversification, processing optimisation and convenient packaging solutions. All categories of dairy products are unique and vary in market value. The operating margins in value-added dairy products are almost twice of liquid milk business due to reduced need of refrigeration and added shelf-life. The appeal and satiety it offers makes them ambrosia for consumers. Baked and fried dairy products (BFDP) are those class of dairy products in which main processing operation is either baking or frying. In addition to preservation of milk solids for longer time at room temperature, manufacture of baked and fried dairy products add value to milk and also provide considerable employment opportunity (Pal and Raju, 2007;Patil, 2011). The characteristic flavour and colour development of the product rely on this unit operation or cooking method and it cannot be replaced. The unique difference in baked and fried dairy products is that in baking dough is prepared and for frying batter is prepared which vary significantly in characteristics (Table 1). The quality of the finished product greatly depends on how the dough or batter is handled.

Introduction

Barley is an important cereal crop grown all over the world and is used mainly for feed and malt purposes and little for human food. Barley is the world’s oldest grain, as evidenced by discoveries in ancient cities in the Middle East and North Africa. It has been cultivated for about 8,000 years, and today is the world’s fourth largest cereal crop. Considerable evidence is available that points to the role of barley as sustaining food source in the evolution of humans. Additionally, alcoholic beverages of various types and fermented foods prepared from barley are commonly referred to in the ancient literature. As other food crops (wheat, rice, corn and rye) became more abundant, barley was relegated to the status of “poor man’s bread”. In the United states, barley used as food is 1.5%, as animal feed 65% and in malt and alcohol production 30% (Newman and Newman, 2006). In 1991, barley used as food in European countries was even lower (0.3%) than the United States. In contrast, during the same time period food was the largest for barley in Morocco (61%), China (62%), India (73%), and Ethiopia (79%). However, current consumer interest in nutrition and human health may help restore barley’s status in the human diet. Nutritional qualities of barley have been known since ancient times. For example, Ajgaonkar 1972 described how ancient Indian physicians effectively stabilized type II diabetics some 2400 years ago. Treatment was remarkable simple and not really different from recommendations that are given to diabetic patients today, i.e., lose weight, change diet, and increase exercise.

    1.    Absorbance (A) - Defined as –log (1-a) = log (1/t), where ‘a’ is the absorbance and‘t’ the transmittance of a medium through which a light beam passes.

    2.    Absorption coefficient (a) - The relative decrease in the intensity of a collimated beam of electromagnetic radiation, as a result of absorption by a medium, during traversal of an infinitesimal layer of the medium, divided by the length traversed.

    3.    Acceleration due to gravity (g) - The standard value (9.80665 m/s2) of the acceleration experienced by a body in the earth’s gravitational field.

    4.    Acid - Historically, a substance that yields an H+ ion when it dissociates in solution, resulting in a pH< 7. In the Brönsted definition, an acid is a substance that donates a proton in any type of reaction. The most general definition, due to G.N. Lewis, classifies any chemical species capable of accepting an electron pair as an acid.

    5.    Acid dissociation constant (Ka) - The equilibrium constant for the dissociation of an acid HA through the reaction HA + H2O1 A- + H3O+. The quantity pKa = -log Ka is often used to express the acid dissociation constant

    6.    Acyl groups - Groups formed by removing the hydroxy groups from oxoacids that have the general structure RC (=O) (OH) and replacement analogues of such acyl groups.

    7.    Adiabatic process - A thermodynamic process in which no heat enters or leaves the system.

Sensory evaluation is a scientific method of evaluating foods including meat products that applies principles of experimental design and statistical analysis through the use of human senses like sight, smell, taste, touch and hearing. It is also called organoleptic evaluation in which we measure, analyse and interpret reactions to those characteristics of materials as they are perceived by the human senses. These attributes can be perceived well by the human sense organs as compared to instruments available for this purpose. It is a fact that no single instrument is able to assess all the attributes of meat products. With the help of these instruments we can very well evaluate the single quality attribute of meat product i.e. shear force instrument or penetrometer is good for knowing the texture and refractometer is for colour interpretation.

Ber (Ziziphus maruritiana Lam.) is cultivated all over the desert part of the Indian subcontinent for its fresh fruits, which are rich in vitamin C, vitamin A and vitamin B-complex and minerals. It can be successfully cultivated even in the most marginal ecosystems of the subtropics and tropics. Ber or Indian jujube belongs to the genus Zizphus of the family Rhamnaceae and order Rhamnales. Ber is adopted to ecologically poor, drought prone areas, which encounter recurrent crop failures and thereby economic crises. It yields nutritious fruit, rich in vitamins and minerals than apple even in drought years and its cultivation is highly cost effective owing to very low input requirement. Ber cultivation also provides employment for people in different farm operations for production and sale of the produce. In India, Haryana, Punjab, Uttar Pradesh, Rajasthan, Gujarat, Madhya Pradesh, Bihar, Maharashtra, Andhra Pradesh and Tamil Nadu are major ber producing states. The area under cultivation with this fruit is 8.7 lakh ha with an annual production of 8.9 lakh tones in India (Baloda et al., 2012). About 125 varieties of ber are available in India. A few of these varieties are known for taste, size, amount of pulp and higher yields. The cultivars Umran, Kathapal and Gola are the most promising varieties of ber in North India (Azam-Ali et al., 2001).

Nutritive Value

Many people are unaware that the ber is one of the most nutritive fruit, since ber is a common fruit. It is one of the richest sources of vitamin C, next only to aonla and Guava but better than citrus fruit and apple. The fruit pulp contains 13-20% total soluble solids and 0.20-0.80% acidity at fully ripened fruit. Ripe fruit of Umran contains 117 mg ascorbic acid/100 g of pulp. Ber fruit contains β-carotene (vitamin-A) at 81 µg/100 g of fruit, 5.6% sucrose, 1.54% glucose, 2.08% fructose, 1.00% starch and 1.13% total carbohydrates. Due this, so ber is often called the “poor man’s fruit”. Table 1 represent the nutritional composition of different ber varieties.

Abstract

Ber is an important fruit of India and South Asia. Its cultivation is gaining popular in recent years. The drupaceous fruits of ber are characterized by climacteric respiration phenomena and produce high amount of ethylene at ripening. It is very high in ascorbic acid content. Maturity and ripening is still judged by colour changes, as reliable maturity indices for particular cultivars are not fully established. Short shelf life is major problem in this fruit. Protocols for postharvest handling is not standardized, however, scattered information are available for postharvest behaviour and handling. Low temperature storage is beneficial and reduces respiration rates but simultaneously chilling injury is again hindrance in commercialization. Postharvest rot is major problem in storage. Therefore, focused research is needed to standardize the storage temperature and alleviation of chilling injury.

Revolutionizing skin cancer detection
The diagnostic process for skin cancer is evolving. Physicians have in the past relied upon physical exams to be followed by scanning and biopsies taking anywhere between 15 days to return results. Although most abnormalities turn out to be non-cancerous, this is distressing to patients and contributes to healthcare costs. Additionally, certain growths that turn out to be cancerous remain undiagnosed since they have not been visible.
Breakthrough startup Damae Medical is set to reverse this process. The startup has developed an advanced probe that is able to take 3D images of the skin to unveil the full extent of abnormalities in real time. This enables doctors to diagnose in an instant, enabling improved personalized treatment. When an operation is required only diseased tissue is removed to prevent unnecessary treatments and improved outcomes in patients.
The Origins in the Institut d’Optique
The beginnings of Damae Medical can be traced to Palaiseau-based Institut d’Optique where in 2013 two photonics students envisaged potential in an emerging imaging tech. Together with the inventor himself in 2014, they cofounded Damae Medical by taking an exclusive license to the core family of patents held by three partner institutions. While this contract was beneficial in launching the company to an early growth spurt, in the long run created difficulty in exercising control. This was resolved by taking an equity-forcontrol purchase in 2019 by Damae to acquire the foundational patent