eChapters

Concept: It’s a natural process that modifies the cytology, physiology, biochemistry, and physical characteristics of seeds. These modifications lower viability and ultimately result in the seed’s death. A decline in the proportion of germination indicates degradation, and weak seedlings are produced by seeds that do germinate. The factors that impact the ability of seed to be stored include the seed’s quality at the time of storage, its pre-storage history (environmental factors during pre- and post-harvest stages), its moisture content or ambient relative humidity, the temperature of the storage environment, the amount of time the seed is stored, and biotic agents. Seed will inevitably get damaged when being stored (Balesevic-Tubic et al., 2005). The quality of the seed at the time of storage, its pre-storage history (environmental factors during pre and post-harvest stages), its moisture content or ambient relative humidity, the temperature of the storage environment, the length of time the seed is stored, and biotic agents are factors that affect the seed’s ability to be stored. Different physical changes can happen to seed during storage because of factors like temperature, moisture content, and length of storage. The viability and vigor of the seeds may be impacted by these modifications.

Objective of Seed Storage

The primary goal of seed programs, which include storage, is to maintain the high standards of the seed from harvest until the crop is sown in the following or future seasons. Additionally, seeds are kept in storage for longer periods of time for a variety of reasons, including protection against crop failures during emergencies or natural disasters, maintaining active genetic stocks for breeding, germplasm preservation for long-term use, stock preservation for the domestic and international seed trade in response to market demands, and parental line seed preservation for the transnational seed industry during one or more growing seasons. The seeds of most major agricultural species can be classified as either orthodox or desiccation tolerant. A drop in storage temperature and relative humidity, commonly referred to as seed moisture content, shortens their shelf life. Seeds deteriorate even in dry storage because of alterations caused by pests and pathogens as well as physiological deterioration. This is accurate, even though the amount of time seeds takes to germinate and stay viable varies according to the makeup of the different plant species. A good seed program handles the seed with care, regulates the store’s temperature and relative humidity (or seed moisture in the case of hermetically sealed containers), and adheres to good sanitation practices to preserve the high planting value of the seed in terms of purity, germination, vigour, and seed health.

Objectives of Seed Grading

Minimization of heterogeneity to the lowest level and enhancement of the homogeneity to the highest level in the seed lots received by the processing unit.

Principle

Separation of seed lots based on differences in the physical properties of the seeds.

Post harvest activities include threshing/ seed extraction, drying, pre-cleaning and conditioning, cleaning, fine-cleaning or grading, seed treatment, weighing and bagging/ packaging, sealing and labelling, storing, and transportation for marketing. Except for transportation and marketing, all these activities collectively known as seed processing. However, for most of the crop, threshing or seed extraction, basic cleaning even drying is done in the farm itself and in the processing unit, the threshed seed is received.

The objective of the seed processing is to prepare the harvested seed in such a way that seed of highest purity and quality would be available for marketing, also for planting. The cleaning and the grading are the foremost activity of the seed processing. The seed, which is received in the processing unit, contains many undesirable particles, which as such cannot be used for marketing, hence cleaning and grading become necessary.

Concept: The preservation of viable seeds from the moment of collecting until they are needed for sowing is known as storage. Every year, a significant quantity of seeds loses their usefulness due to incorrect storage. Seeds need to be preserved and stored dry. As was previously mentioned, seed moisture content and storage temperature have the biggest effects on how long seeds last. The three main environmental elements that impact seed deterioration and loss of viability are moisture, temperature, and oxygen percentage. For over 90% of species, reducing seed moisture content (MC) to certain thresholds consistently lengthens the seed’s lifespan (Roberts 1973). These species are categorized as “orthodox” in terms of the conditions in which they should store seeds; under suitable dry, cool conditions, they typically maintain viability and germinability even after extended periods of storage. Ellis and Roberts’ improved viability equations have addressed the quantitative impacts of both drying and cooling for orthodox seeds. The life of the seed is often doubled for every 1% drop in seed moisture (when seed MC fluctuates between 5 and 14%) and every 5 oC drop in storage temperature (between 0 oC and 50 oC) (Harrington 1972). Low seed MC and low temperature are hence fundamentals of traditional seed storage. Careful regulation of these two factors is necessary to achieve optimal storage life. But most seed produced annually just has to be kept from harvest until the following planting season. Depending on the type of seed, it may or may not need to be stored at temperatures and relative humidity above room temperature. Regardless of any modifications made for unique uses, the local climate storage facility needs to have a few essential components (Barre, 1954; Wheeler and Hill, 1957).

Concept: Operations conducted before and after harvest are essential components of the system for producing high-quality seeds. If enough care is not taken in the initial stage, there most likely won’t be any resources left to get high-quality seed. Like this, carefully produced, high-quality seed may lose a significant percentage of its worth if post-harvest management protocols are not adhered to. Its quality is highly correlated with soundness, fullness, and homogeneity of physical characteristics (size, shape, density, colour, and appendages), in addition to mechanical planting’s simplicity and improved crop establishment. Improving the seed that has been gathered and getting it ready for secure storage till needed are accomplished through the effective and efficient process of seed processing. To increase the quality of the seed lot, the goal of seed processing must be to optimize the physical properties of the seed and the constituents of the harvested seed mass. The three main steps in seed processing are conditioning, grading, and applying protectants or enriching with nutrients. These steps are completed in compliance with established protocols and standards (McDonald and Copeland 1997; Agrawal 1996; Jorgensen and Stevens, 2004). The distinct qualities of the crops and the surroundings are taken into consideration while adjusting the machines and operations.

Oil palm is a major source of edible oil globally and plays a crucial role in meeting the dietary needs of millions of people. India has been focusing on expanding oil palm cultivation to reduce its dependence on imported edible oils. Oil palm can yield high oil compared to other vegetable oils. Palm oil production rate depends on post-harvest handling, and milling and extraction processes. After harvesting, some quality changes occur in oil palm fresh fruit bunches which leads to reduce the oil quantity and quality. With proper handling of post-harvest bunches and adapting best extraction methods can increase the oil yield and quality. Palm oil alone has the potential to make India sustainable in edible oil production.

Introduction

Oil palm (Elaesis guineensis Jacq.) originated in the tropical rain forest of western Africa and is now being cultivated in more than 45 countries around the world especially tropical regions i.e., Malaysia, Indonesia, Thailand, Nigeria, Columbia, and Ghana. This crop was introduced in India during the early 1990s, to meet the demand and to attain sustainable edible oil production in India due to its high oil-yielding capacity compared to other vegetable oil crops. It produces two distinct oils, i.e., palm oil and palm kernel oil. Palm oil is derived from fleshy mesocarp of the fruit and palm kernel oil obtained from the kernel of stony seed.

Coconut, arecanut and palmyrah, which hold significant cultural and historical importance in India, have been the primary focus of cultivation efforts. Cocoa, a relatively recent addition to India, serves as a companion crop to coconut and arecanut, contributing to the economic well-being of farmers nationwide. However, the current situation emphasizes the crucial role of value addition and product diversification in stabilizing prices. Despite the initial stages of value addition in India’s palm crops, recent innovations and established value chains have the potential to empower farmers as entrepreneurs, thereby augmenting their income. Moreover, the value-added products from these palms have enormous export potential. This chapter explores the advancements in value-added products and the diversification of coconut, arecanut, palmyrah, and cocoa, providing insights into opportunities for cottage or small-scale industries.

Introduction

Agricultural production is necessary to fulfil nutritional requirements for human populations and global food security. The agricultural sector also forms the economic backbone of many low-income countries in which millions of farmers are employed (Anushka et al, 2022). However, managing agricultural production to achieve multiple objectives of providing food, supporting livelihoods and protecting biodiversity and forests is a challenge especially in tropical, low-income countries (Anushka et al, 2022). Usually, the growth in global agricultural production is largely driven by commercial and export oriented commodities. One such agricultural commodity that has high global demand is cashew (Anacardium occidentale L.). Cashew is presently cultivated in 33 countries including India in the world. Global land area for cashew cultivation between 1980 and 2018 has seen an eleven-fold increase from 526,250 ha to 5,972,724 ha (Anushka et al, 2022).

Introduction

India is bestowed with huge production of fruits, vegetables, cereals, millets, sugarcane along with meat production, milk production, fish production and poultry. Despite such a huge production in India, owing to perishable nature of these produce around 25-30 per cent of the produce is being lost as post harvest loss. The one important reason for this may be the production of the crops are season specific and during the peak season the production is more while demand for consumption is less. It may be possible to cut down losses to great extent, if these produces may be transported from the produce states to those who are not producing due to agro-climatic reasons. So for making transportation of the perishable a successful venture in decreasing post harvest loss, there must be proper storage facilities both at producing site as well as marketing place. The aim of the storages must be to keep the produce in saleable condition during entire storage periods. Some products are stored for short period whereas fresh fruits, vegetables require cold storage. Foods before keeping into the storage room need some pre-storage treatments for better results.

India is the second largest producer of fruits However, the export potential of fruits and vegetables is very negligible. This is because of improper knowledge to the farmer about proper post-harvest infrastructure facilities. Fruits have a high-water content ranging from 70-95 per cent. They dry quickly under any normal atmospheric condition. These causes loss of rigidity and shrinkage of the cells cause wilting and shrivelling. Appropriate packaging ensures prolonged the shelf life of fruits and vegetables by preventing moisture loss and thereby wilting. Transportation is a critical phase in the fruit supply chain that can significantly affect the quality of fruits. Several factors during transportation can lead to quality degradation such as temperature/humidity fluctuations, mechanical damage, transit time etc. To mitigate the adverse effects of transportation on fruit quality, best practices ie, real-time monitoring, temperature and humidity control, loading/unloading techniques can be employed. Quality evaluation is a critical component in the fruit industry, encompassing a range of assessments to ensure fruits meet the desired standards for consumer satisfaction, shelf life, regulatory compliance, and market competitiveness. It involves a comprehensive approach that includes physical, chemical, and sensory assessments, supported by advanced technological tools, to maintain and enhance the quality of fruits throughout the supply chain. This book chapter deals with the effective packaging, transportation, and quality evaluation of fruits, ensuring that consumers receive fresh, high-quality produce.

The production of fruit crops is largely dependent on the environmental conditions and nutritional status of the plants. Any alteration in the environmental conditions and nutritional status may results in different physiological disorders which affect the growth of the plants and also the quantity as well as quality of the fruits. The precise and early recognition of physiological disorders is important for the timely adaptation of remedial strategies to reduce the crop loss. Physiological disorders in fruits crops may be due to single factors or multiple factors may be involved in the appearance of physiological disorders. A sound knowledge about the cause of physiological disorder is useful to adopt suitable remedy for the disorder.

Introduction

The abnormal growth behavior or unusual external and/or internal conditions of fruits which results due to adverse environmental conditions and nutritional imbalances are considered as physiological disorders. Physiological disorder is best defined as external or internal malfunctioning resulting from improper environmental or cultural conditions before and/or after harvest. Variation from normal temperature, light, moisture, nutrient, harmful gases, insufficient supply of growth regulators, deficiencies or excesses of nutrient etc. are some of the important environmental and cultural factors of physiological disorders (Fig. 1). Physiological disorders affect the quality as well as quantity of the fruit crops. Detection of precise physiological disorders is not easy and requires a strong knowledge regarding them.

Introduction

Fresh fruit journey from the farm to the consumer’s table is an intricate process which needs a lot of attention. The way that the produce is harvested and handled is of supreme importance in relation to its quality shelf life and general market attractiveness. Improper handling practices during these critical stages can bring both quantitative and qualitative loses hence the perishable produce will lose its commercial value and appeal to the consumers (Kader, 2005). No doubt the significance of successful harvesting and post-harvest handling practices is crucial and has an impact on quality features and safety in case of fresh fruits. Poor management can cause physical assault ripening speed and more susceptibility to the growth of micro-organisms which makes the produce unsuitable for consumption or processing.

Horticulture sector, comprising fruits, vegetables, floriculture, medicinal and aromatic crops, mushroom, spices and plantation crops, had witnessed phenomenal growth in production and productivity during the last two decades. Resultantly, horticulture in India is recognised as one of the fastest growing sectors in the world. The production has reached to 351.92 million tonnes in 2022-23 as compared to 231 million tonnnes in 2010. Progressive urbanization, increased spendable income and awareness for balanced and nutritious food have contributed towards increasing demand of horticulture produce. The increasing demand coupled with higher income returns per unit area has triggered this growth pattern, which has been largely possible due to policy environment to support horticulture both for research and development.

Fruits represent a vital component of global agriculture, serving as not only a significant source of essential nutrients but also a lucrative sector of the economy. However, from the moment of their inception on the tree to their arrival on consumers’ tables, fruits undergo a complex journey influenced by a myriad of factors. Among these, pre-harvest practices wield a profound impact on fruit quality, enzymatic activities, texture, ripening, and ultimately, post-harvest transportation losses. Each pre-harvest practice, from mineral nutrition to harvesting methods, plays a distinct role in shaping the biochemical composition and physical attributes of fruits, ultimately affecting their marketability and shelf life. Mineral nutrition stands as one of the foundational pillars of fruit production, with essential minerals serving as building blocks for various biochemical processes. Irrigation practices represent another critical aspect of pre-harvest management, as water availability profoundly impacts fruit development and composition. Different irrigation regimes can influence enzymatic activities, fruit texture, and the timing of ripening, necessitating strategic water management to achieve desired fruit quality while minimizing post-harvest losses. Canopy regulation, achieved through training and pruning techniques, offers growers a means to manipulate light penetration and airflow within the orchard. Moreover, the application of plant growth regulators (PGRs) emerges as a tool for fine-tuning fruit development and ripening processes. By modulating hormonal signals, PGRs can alter enzymatic activities, influence fruit texture, and mitigate transportation losses. However, judicious application is paramount to avoid adverse effects on fruit quality and safety. Harvesting decisions, including the determination of optimal maturity and the timing and method of harvest, profoundly impact fruit quality and post-harvest losses.

Horticulture crops contribute significantly for the total agricultural production and productivity. World production of fruits accounted for the total volume of 933 million tonnes (FAO, 2023). India being second largest producer for majority of fruit commodities had a production total reaching 108.34 million tonnes in 2022-2023 from an area of 7.15 million hectares. It accounts for 33 per cent to the agriculture GVA (Gross Value Added) and plays an important role in the Indian economy. India is second largest producer of majority of fruits and vegetables. Diverse agro-climatic zones in the country make it possible to grow almost all varieties of fruits in India. Produced fruits are used for domestic consumption, processing and export purposes. During 2022 23, fresh fruits exports was valued at 6219.46 crores (APEDA, 2023). The fruits grown in India includes domestic fruits and nuts along with the exotic fruits contributing for the food and nutritional security. The growth of these economically important fruits provides scope for maintaining rich germplasm, enhance bio-diversity and maintain ecological balance.

Introdction

Fruits are an important supplement to the human diet, as they provide minerals, vitamins and fiber required for maintaining good health. Fruits are also rich in phytochemicals (7, xanthophylls, polyphenols, flavonoids, phenolic acids, organic acids etc.) which possess good antioxidant properties. India’s diverse climatic conditions ensure availability of almost all the varieties of fresh fruits and vegetables. According to FAO (2021), the country ranks first in the production of bananas (26.45%), mangoes (including mangosteens and guavas) (43.80%) and papayas (39.30%). The scenario of horticulture crops in India has become very encouraging. The percentage share of horticulture output in agriculture has become 33 per cent (Anonymous 2021). India has witnessed increase in horticulture production over the last few years. Significant progress has been made in area expansion resulting in higher production. Over the last decade, the area under horticulture grew by 2.1 per cent per annum and annual production increased by 3.9 per cent. During 2020-21, the production of horticulture crops was 334.60 million tonnes from an area of 27.74 million hectares. The production of fruits has increased from 76.42 million tonnes in 2011-12 to 108.34 million tonnes in 2022-23 (Agricultural Statistics at a Glance 2022). The area under cultivation of fruits stood at 7.05 million hectares. The total production of fruits in the year 2020-21 was highest in case of Andhra Pradesh (17.70 million tonnes) followed by Maharashtra (11.73 million tonnes) and Uttar Pradesh (11.23 million tonnes) (Anonymous 2021). India now is the second largest producer of vegetables and fruits in the world. The country ranks at first position in the production of banana, mango, lime and lemon, papaya and okra. The area and production of fruits in India is presented in Table 1. The fruits namely banana, mango, citrus, papaya, guava, grapes, apple, pineapple and sapota account for more than 85 per cent of the total production of fruits. The other fruits which are produced in India are almond, walnut, jackfruit, bael, ber, custard apple, kiwi, passion fruit, peach, pear, plum, strawberry etc.

Previous Year Questions

1. What is food security? Why is it essential? Describe the current food security system in India. (10M, CSE 2022)

2. What is food security? Indicate the major constraints in food procurement and distribution. (10M, CSE 2017)

Difference Between Production and Productivity

• Production is total quantity produced in an area.

• Productivity is the quantity produced in one unit area.

• For example, total area is 10 hectares and the quantity produced is 15000 kg.

Previous Year Questions

1. Discuss the iron and protein malnutrition in India. Describe the dietary pattern for mitigating the above-said malnutrition. (15M, IFoS-2022)

2. What is protein energy malnutrition? Give micronutrient deficiency in women and children. (20M, CSE 2017)

3. How are vitamins classified? Name the blood clotting vitamin. Give its various functions and sources. (10M, 150W, CSE 2019)

4. What do you mean by nutrient deficiency? Explain the micro-nutrient deficiency in context of work capacity of women and children. (12.5M, CSE 2015)

Previous Year Questions

1. Differentiate between protective foods and energy foods. (10M, IFoS 2015)

2. What do you mean by ‘hunger’ and ‘hidden hunger’? Comment on various strategies in combating hunger. (15M, CSE 2021)

3. Classify foods on the basis of their function (5M, 2023)

Previous Year Questions

1. What are the different ‘National Dietary Guidelines’ of India? What is your opinion on balanced diet of Indians? (20M, CSE 2021)

2. Classify foods on the basis of their function. Write down a balanced diet for a sedentary man & woman in India (10M, CS 2023)

National Dietary Guidelines

Recommended dietary allowance (RDA) is defined as “the nutrient present in the diet which satisfies the daily requirement of nearly all individuals in a population”.