eChapters

The foods we eat contain nutrients. Nutrients are substances required by the body to perform its basic functions. Nutrients must be obtained from diet, since the human body does not synthesize them. Nutrients are used to produce energy, detect and respond to environmental surroundings, move, excrete wastes, respire (breathe), grow, and reproduce. There are six classes of nutrients required for the body to function and maintain overall health. These are carbohydrates, lipids, proteins, water, vitamins, and minerals. Foods also contain non-nutrients that may be harmful (such as cholesterol, dyes, and preservatives) or beneficial (such as antioxidants). Nutrients that are needed in large amounts are called macro-nutrients. There are three classes of macro-nutrients: carbohydrates, lipids, and proteins. These can be metabolically processed into cellular energy. Micro-nutrients are nutrients required by the body in lesser amounts, but are still essential for carrying out bodily functions. Micro-nutrients include all the essential minerals and vitamins. There are sixteen essential minerals and thirteen vitamins.

Naïve panel: It refers to the sensory evaluation panel that has not been trained specifically regarding the product evaluation being undertaken in the study.

Nano technology: It is the art of manipulating materials on an atomic or molecular scale to build microscopic devices. The word “nano’ meaning ‘dwarf” in Greek language refers to dimension / magnitude of the material / particle in the order of 109. Nanotechnology is nothing but manipulating of particles into very small particles called nano-particles. These particles have dimensions in the scale of nano-meter and used to design / build materials and devices. Nanotechnology has been provisionally defined as relating to materials, systems and processes which operate at a scale of 100 nanometers (nm) or less. Nanotechnology is an anticipated manufacturing technology that allows through and inexpensive control of the structure of matter by working with atom. It will allow many things to be manufactured at low cost and with no pollution. The concept of nanotechnology was first given by Nobel Laureate physicist Richard P. Feynman in Southern California in 1959. Nanotechnology is sometimes termed as Molecular Manufacturing based nanotechnology “MNT”.

The major challenges to any developing society are poverty and economic deprivation of its ruralpopulation.Eradication of poverty, the focus of all developmental efforts has remained a very complicated and serious concern among developing countries. Poverty is abysmal rooted covering several interlocked aspects such as lack of asset, under employment, uncertain and relatively unproductive employment, low remuneration, economic vulnerability, illiteracy, social disadvantage etc.

The rural areas were found to be more prone to poverty, even if it exists in urban areas also. The rural poor are perpetuating poverty and are the victims of the “vicious cycle of poverty”. Fishing communities in the coastal belts all over the world are also not an exception to this. Poverty in fishing communities is very common and is characterized by high population density, poor living conditions, lack of proper education and poor access to education and health care. Due to poor attention paid by the state, the infrastructure support like roads, electricity, good drinking water, markets etc also are be poor. Though efforts for reducing fishing pressure is taken by Government, scope for alternative employment opportunities are less. Thus those sector that are in engaged inthe world’s most dangerous occupations, are considered on par with SC/ST communities as far as India is concerned. The loss of a boat, gear or an active fisherman in the family can be tragic and lead to total financial deprivation of the family. Hence poverty and vulnerability in fishing communities is widely known but poorly addressed issue. As in rural farming sector, dependence of fishing communities on private moneylenders continues in many areas, especially for meeting emergent requirements. For various reasons, credit to these sections of the population has not been institutionalized.

The emergence of microfinance as an alternative financial delivery mechanism was a response to the failure of past efforts by government and international agencies effectively to provide financial services to the poor. But while considering micro finance programmes for fisheries sector, there should be special considerations that are unique to fishing communities and need special consideration. Instead of random payment of loans to target sectors and populations, efforts were taken for setting up and building local institutions that cater for the poor. This resulted in the materialization of microfinance institutions (MFIs) that serve the rural poor. MFIs initially started providing microcredit but have now extended their services to savings, insurance etc.

Fisheries as a source of food, livelihood and income is probably as old as human civilization. Millions of men and women across the world, especially the developing world, are dependent on the sector. While fish capture in the open seas has generally been a male preserve conditioned by various social, cultural and economic factors; women also have significant contributions for sustaining household nutritional and income security. They have been engaged in fishing in inshore coastal waters, inland water bodies like rivers and ponds; and in post harvest activities like pre-processing, processing, drying, salting, and allied activities like marketing, net making and mending etc. With increasing volumes of fish coming from culture fisheries the participation of men and women in these activities are also increasing. Suffice to say that both men and women contribute to the overall growth and development of the fisheries sector. However, often women and their contributions tend to be marginalized in the fisheries development debate.

Women’s roles in fisheries

In the marine fisheries sector, fishing is largely a male preserve. Women rarely venture into the sae, conditioned by cultural and social taboos rather than by skill and endurance. However, the support from women in managing the households and in taking up subsistence or other livelihood activities related to fisheries activities that may actually go into the household income security need to be acknowledged. Studies show that women comprise about 46% of the labour force in small-scale capture fisheries-related activities (FAO, World Bank, IFAD, 2008). It is as high as 73% in Nigeria to a low of 4% in Mozambique. At least 50 % of the workforce in inland fisheries and 60 % of those marketing fish are women in Asia and West Africa.

Ice bank cooling: Storing of fruit and vegetable in storage chamber with positive ventilation and system countries where ice formation is allowed during night time (as electricity cost of night is less as compared to the day time). Melting of ice occurs during day time and with proper air circulation by means of ventilation process, approximately 0.5-1⁰C temperature with 90% RH in the chamber is maintained. Ice Bank Cooler / Air forced cooler leads to desiccation of the produce (Plate 139). So use forced air high humidity cooler and these are known as Ice Bank Cooler. Ice bank coolers are useful for strawberry.

Lab coat: A loose white coat with deep pockets that is worn in a laboratory or medical office.

Labelling: It means any written, printed or graphic matter that is present on the label, accompanies the food or is displayed near the food, including that for the purpose of promoting its sale or disposal. After packaging, labels are required on the finished products intended for distribution and sale. Labelling can reflect on the quality of the product. It must be clear and informative. Information includes Name of the Manufacturer, Date of Manufacture, Net Weight, Gross Weight, Best before etc. Proper storage is needed for maintenance of the quality. Storage must be done only at recommended temperature, relative humidity, light and air / oxygen and carbon dioxide conditions etc. to maintain the quality of the food product. Label may include tag, brand, and pictorial or descriptive matter, written, printed, embossed, graphic, perforated, stencilled or stamped impressions. It is attached to container, cover, lid, or crown of a food package.

Laboratory: A place equipped for experimental study in a science or for testing and analysis. Broadly, it is a place providing opportunity for experimentation, observation, or practice in a field of study.

Lacquer: It is a colloidal dispersion of a solution of cellulose derivative, resin and plasticizer in solvent and diluents, where in all these constituents dried in air by evaporation of solvents, thus yielding a transparent, hard and water proof film.

Objective Methods: Objective Methods are used for evaluation of food quality. These are based on recognized standard scientific tests to any sample of the product without regard to its previous history. They represent the modern idea in quality control (QC) because the human element has been excluded. This method divided into three groups like physical, chemical and microbiological. The devices are used in this evaluation.

Obligate anaerobes: These microbes do no grow in the presence of oxygen.

Obligate parasite: Obligate parasites is host specific and grows on living host only and attach limited range of host and are very difficult or impossible to grow on artificial culture/media.

Obligate thermophile: These microorganisms grow at a temperature between 38-80^oC.

Oenology: Treatments used to prevent spoilage of wine is called oenology. It is synonym to that of enology.

World Scenario

The world climatic conditions are divided into Tropical; Sub-Tropical and Temperate climates. Fruits and Vegetables suited to these climatic conditions are grown successfully. Considering the nutritional and economic importance of fruits and vegetables, there is tremendous increase in area and production of fruits and vegetables throughout the world. The present global scenario of fruit and vegetable crops (areas harvested, production and productivity (yield) has been given in Table 1. It shows that the fruits 865.88 million tones has been harvested from 65.24 million Ha land with productivity 13.27 t/ha (Table 1) where as vegetables produced 1075.20 million tonnes from area 57.00 million ha with yield 18.86 tonnes/ha (Table 1) during 2016.

Percent Solutions

There are three types of percent solutions. All are parts of solute per 100 total parts of solution. Based on the following definitions you may calculate the concentration of a solution or calculate how to make up a specific concentration

    1.    % W/W - Percent of weight of solute in the total weight of the solution. Percent here is the number of grams of solute in 100 grams of solution. 
        Example: 
        A 100% (W/W) NaCl solution is made by weighing 100 g NaCl and dissolving in 100 g of solution

    2.    % W/V - Percent of weight of solution in the total volume of solution. Percent here is the number of grams of solute in 100 ml of solution. This is probably the least significant way of naming a solution, but the most common way of doing it. In fact, any percent solution not stipulated as W/W, W/V, or V/V is assumed to be % W/V. 
        Example : A 4% (W/V) NaCl solution is 4 g of NaCl in 100 ml of solution.

    3.    % V/V - Percent of volume of solute in the total volume of solution %V/V. Percent here is the number of milliliters of solute in 100 ml of solution. 
        Example: A 10% (V/V) ethanol solution is 10 ml of ethanol in 100 ml of solution; unless otherwise stated, water is the solvent. 

Vacreation: The pasteurization of the milk or cream under reduced pressure by direct steam is called vacreation.

Vacuum: The state of negative pressure. It is equal to atmospheric pressure minus absolute pressure.

Vacuum cooling: A technique of cooling vegetable (leafy vegetables, asparagus, brussels sprouts) having a high surface to volume ratio; rapidly and uniformly by boiling off some of their water at 1⁰C and at low pressure (5 mm of Hg) into a sealed container. The produce is cooled by evaporation of water from the tissue surface and is more rapid than hydro cooling.

Wafer: A thin crisp cake, candy, cracker or chips is known as wafer.

Waffle: A crisp cake of batter baked in a waffle iron is called waffle

Warner-Bartzler Shear: It is one of the oldest but commonly used devices used to measure the tenderness of meat. It is used to test the quality in the cooked meat

Introduction

Whey is the serum or watery part of the milk that remains after separation of curd that result from the acid or proteolytic enzyme mediated co-agulation of milk. It is major by product of dairy industries manufacturing products like channa, paneer, cheese and chakka (Sharma and Bhatia, 1999).The current world production of whey is estimated at about 165 million tones, in that cheese whey accounts for nearly 95 % of total whey. In India near about one million tonne of whey is annually derived, in that major source of whey is from the production of channa, paneer and shrikhand production. This is mostly thrown away as a waste which creates environmental pollution, also in that way about 70, 000 tonnes of Nutritious solids are lost (Puranik, 1999).

    1.    The heifer is bred (naturally or by insemination) before the age of two years.

    2.    The gestation period is nine months and one week.

    3.    After calving, the cow gives milk for 10 months.

    4.    1 – 2 months after calving the cow will again be bred.

    5.    The cow then continues to give milk for about 300 days. This period is known as lactation.

    6.    Milk should preferably be handled in a closed system, to minimise the risk of contamination. It must be cooled to 4 °C as soon as it is produced.

    7.    The content of protein, lactose and ash is somewhat higher in buffalo milk than in cow milk. Buffalo milk contains vitamin A, but lacks b-carotene, which is present in cow’s milk.

    8.    When milk and cream turn to butter, there is a phase inversion from an oil-in-water emulsion to a water-in-oil emulsion.

    9.    In milk, the whey proteins are in colloidal solution and the casein in colloidal suspension.

Fermentation

The decomposition of carbohydrates by microorganisms and enzymes is known as fermentation. During fermentation process of food organic acids and alcohol etc are produced which act as preservatives and also provide fine flavor and aroma that increase the value of raw materials. Most fermented foods contain a complex mixture of carbohydrates, proteins and fats etc. Fermentation occurs when microorganisms consume susceptible organic substances as a part of their own metabolic processes. Natural fermentation is probably oldest form of food preservation.

Abstract

The production of natural food colours through bio-processing is preferred now-a-days due to health related issues associated with their synthetic counterparts. Microorganisms are generally preferred sources as these have high production rate, high growth rate, ease of handling under controlled conditions and absence of seasonal variations. Biopigments can be produced from different genera of bacteria, yeast and mold. Different types and colours of pigments have been produced from microorganisms depending upon their origin, media components and process conditions. The biopigments have variety of applications in food industry such as food additives, food preservatives, biological control agents and nutritional supplements. These have also been associated with therapeutic, and antioxidant properties. Lycopene from B. trispora is used as a food ingredient in dietary supplement. Astaxanthin from X. dendrortious has also been reported to have beneficial effect on human health as it possesses strong antioxidant properties. Arpink red P. oxalicum is used as red colorant in meat products, non-alcoholic drinks, milk products and confectionary. 0- carotene is considered as leading food colorant in world and is applied to range of baked, dairy and canned foods to improve their appearance. The antioxidant andprecursory properties of0-carotene increase its applications in pet foods. Zeaxanthin is used as additives in poultry fed to intensify the colour of the egg yolk. Monascus pigments are utilized for coloration of sausages, ham, marine products and tomato ketchup. Monascus extract is also marketed as dietetic supplement in Japan. Thus, the biopigments can serve as a chromophore for colorant production with broad spectrum of colours and wide applications.

Abstract

Health benefits of aloe vera include its application in wound healing, treating burns, protection against skin damage, lung cancer, intestinal problems, increasing high density lipoprotein (HDL), reducing low density lipoprotein (LDL), reducing blood sugar in diabetics, fighting acquired immune deficiency syndrome (AIDS), allergies and improving immune system. Phytochemistry of aloe vera gel has revealed the presence of more than 200 bioactive compounds. Aloe vera gel is extracted from its leaves and appropriate processing techniques are needed for stabilization and preparation of the food products. Aloe vera gel products have become available in our country for internal consumption as a tonic and diversification in its products is on progress. The use of aloe vera has gained popularity because of herbal movement initiated by naturopaths, yog gurus, alternative medicine promoters and holistic healers. A recent market analysis report indicates that Americans have spent almost 40 billion dollars on functional foods, drinks and supplements for the improvement of their appearance as well as to provide energy and added nutrition to handle health issues such as hypercholesterolemia and diabetes.

Abstract

The concept of functional foods has received significant media attention and, as a result, interest has focused on the need for research into the non- nutrient constituents of food plants. This has enabled market penetration of functional foods containing increased amounts of bioactive food compounds or physiologically active nutrients and non-nutrients within food that impart proven health benefits. Functional foods can take many forms. Some may be conventional foods with bioactive components that can now be identified and linked to positive health outcomes. Some may be fortified or enhanced foods, specifically created to reduce disease risk for a certain group of people. Numerous observational studies have shown that omega-3 fatty acids enriched diets are associated with a reduction of cardiovascular mortality, heart attack and sudden death. In several studies, a higher fish intake has been associated with decreased incidence of coronary artery disease (CAD) and cardiovascular mortality. A trial revealed that fish oil supplementation of 130 mg/kg of body weight each day decreased the number of stiff joints, duration of morning stiffness, pain and global arthritis activity. Many supplements contain active ingredients that have strong biological effects in the body. The bioavailability of nutrients within a given food is governed by the composition and microstructure of the food, commonly referred to as the food matrix. More specifically, numerous studies investigating the development of functional foods have shown that the interactions between nutrients and non-nutrients within the food matrix can be synergistic, additive, or neutralizing in nature. The preventive and curative effects of the functional foods on health concludes it to be integral components of established public health programs to reduce the risk of specific diseases.

Livestock is considered one of the essential variables in the revenue of a farmer. The sector (excluding fisheries) contributes 30 per cent to India’s agriculture gross domestic product, and it is valued at more than Rs. 9 lakh crores. India is also one of the largest producers of milk in the world; around 70 million rural households are engaged in professions linked to dairy. India is also the second largest exporter of bovine meat after Brazil. This sector provides a substantial income to farmers and supports the economy by generating enough demand in the rural and semi-urban regions. This animal husbandry sector comprising dairy and poultry is extremely valuable for farmer’s income security, and Covid-19 has the potential to disrupt this sector.

In developing countries such as India, where dairy farming is one of the most important sources of livelihood for 60 million rural households, 80 per cent of whom are landless, small and marginal farmers who depend on dairy for daily income, the crisis is extreme. Thus, even a small decline in the growth of the dairy sector significantly affects a large chunk of our population which are already vulnerable due to low income, poor savings, and lack of livelihood alternatives. Small production in multiple households leads to more reliance on efficient transportation for procurement. In addition to this, the Indian dairy sector is still dominated by the unorganized sector which handles more than 50 per cent of the marketable surplus. Milkman and vendors collect a small quantity of loose milk from different households and then supply it to urban consumers, roadside eateries, hotels, and sweetshops. Closure of shops and restrictions on transportation has ruthlessly disturbed this arrangement. Even in the formal sector out of the total milk processed 65 to 70 per cent is sold as liquid milk which is immediately vended after packing and only 30 per cent is processed into other dairy products like ghee, butter, cheese, curd, ice-cream, milk powder, etc. Thus, the formal sector also lacks sufficient infrastructure and storage facilities for processing and storing surplus milk after value addition.

Instructions for establishment registration and processing, filing for acidified and low-acid canned foods

Acid Food
 
A food that has a natural pH of 4.6 or below.
 
Acidified Food
 
A low-acid food to which acid(s) or acid food(s) are added and which has a finished equilibrium pH of 4.6 or below and a water activity (aw) greater than 0.85.
 
Authorized Company Representative
 
The person authorized by the company to sign the registration and process filing forms on its behalf. That person should possess the knowledge necessary to answer technical questions concerning filed processes.

7.1. Challenges in Milk Quality

Demand for milk and milk products in India is growing very rapidly, owing to urbanization, customer convenience, and the change from loose to packaged milk products. At present, the dairy sector is rising at about 10-12 per cent annually. Based on population growth projections and an increase in urbanization over the next four decades, India is projected to need approximately 600 million tonnes of milk per year to meet the demand for milk and milk products. This means that India’s milk production needs to grow at around 3.2 per cent CAGR for the next 40 years (FICCI, 2020).

Main reason of poor quantity of milk is due to unhygienic and poor condition of animal farms and dairies. Even due to high demand in foreign country we cannot export such poor quality of milk product. Many times, Indian milk products get rejected in foreign nations due to unhygienic milking milk contains high number of microbial counts. Reasons behind the quality affected in India are due to poor health of animal, polluted water and food and Unclean surrounding in farm. So, it is necessary to consider all this challenges in improving milk production. Currently most of the milking animals are not screened on regular interval of time. So, there is lots of chances that some diseases can transmitted to human beings. Farmers use antibiotics and chemical drugs to increase the production of milk this will also affect the quality of milk. These issues can be avoided by regular screening of animals in animal husbandry and also maintaining history records of health, feed etc. Quality of feed should be checked regularly. There must be pollution control in the feed and water used in cattle farms (Bhagyalaxmi, 2020).