eChapters

Introduction

Our traditional knowledge of medicine has been one of the strongest areas of research because of our rich heritage in herbal plants & great biodiversity in our fauna & flora. Consumption of plant foods and the structurally diverse natural products provided by them have long been associated with health-protective and therapeutic effects. Natural products in plant foods have been shown to have pleiotropic therapeutic and chemopreventive properties. These bioactive products are known to potentiate the efficacy of other drugs and have synergistic effects too. Most of the prescription drugs discovered so far is from plant sources and 75% drugs had been claimed in folklore claims and traditional medicinal system (Reynold, 1991; Benowitz, 1996). The traditional Indian medicinal system utilizes multicomponent formulations of plant extracts which may either act synergistically or avoid many side effects and might have added up trace element through combination of different plant extracts which could have additive effects. However the effort to utilize traditional knowledge in the light of modern scientific findings is lacking in India. Accumulating evidences as well as in-vitro studies implicates inverse relationship between regular consumption of fruits vegetable and the risk of specific cancer. Diet derived nutritional compound mediated interventions in the process of tumorigenesis may be promising chemopreventive strategy with minimal toxicities to the physiological system.

Introduction

Agriculture is an important sector of Indian economy and it contributes about 17.4% to the country’s Gross Value Added (GVA) for the year 2016-17 provides employment to over 54.6 % of the population. There has been a continuous decline in the share of agriculture and allied sector in GVA from 18.6% in 2013 14 to 17.4% in 2016-17. Falling share of agriculture and allied sector in GVA is an expected outcome in a fast growing and structurally changing economy. However since 54.6% of the population is still dependent on agriculture and engaged in improving the agricultural production and overall income. The agricultural production system required timely and adequate agriculture credit to fulfill farmers need. Agricultural Finance ensures provision of multiple types of services dedicated to support both on- and off-farm agricultural activities and businesses including input provision, production, and distribution, wholesale, processing and marketing.

Abstract

Garden peas of two cultivars (Pb-87 and Pb-88) were procured. Pods were shelled manually, grains were blanched and dehydrated. Other lot of peas of both the varieties was allowed to mature on the plant till the plant foliage dried up, harvested, pods were dried in shade for few days, shelled manually and grains were further dried in shade. Grits were prepared by grinding rice and pea (dhal) in a laboratory grinder to pass through 20 mesh sieve. Blends were prepared by mixing rice and pea grits in the ratio of 100:0, 85:15 and 70:30. The blends were subjected to extrusion cooking using Brabender single screw extruder. The extruder die pressure, specific energy consumption (SEC), expansion ratio, density, water absorption index (WAI), water solubility index (WSI) and organoleptic characteristics were studied. Addition of pea grits resulted in a decrease in die pressure in all the blends. Addition of pea grits showed a significant effect on SEC. A decrease in expansion with increase in the level of pea grits in blend was observed. The extrudates having lower expansion showed higher density values and vice versa. Effect of replacement of rice grits with pea grits on WAI was found to be significant. Level of pea grits significantly affected the WSI. Incorporation of pea grits in the rice grits significantly affected the sensory characteristics. Replacement of rice grits with mechanically dried pea grits resulted in deterioration of acceptability score, but addition of field dried pea grits improved the same.

Materials Required

Fruits/ vegetables, washing tanks/ containers, size grader, fruit waxes, packaging material, neem based fungicides etc. 

Procedure

    1.    Take available fruits or vegetables 
    2.    Wash them in plain water or chemical solution as told by the teacher
    3.    Shade dry the fruits / vegetables
    4.    Prepare suitable wax solution
    5.    Apply wax on to the fruits as told
    6.    Record the fruit weight before packing
    7.    Pack the fruits properly in the trays / boxes depending upon the type and purpose
    8.    Do curing if required 
    9.    Do pre-packaging, if desired
    10.    Label the package for desired information
    11.    Keep the fruits for storage
    12.    Record the observations pertaining to weight loss and rotting periodically depending upon the commodity and its shelf life.

Introduction Soil ecosystems are the foundation of human life support systems. Soil erosion, loss of soil organic matter and nutrient depletion are among the leading contributors to impaired soil health, reduced crop yields and poverty. Realizing the significant role that soils play in food and environmental security and in abating climate change, the United Nations declared 2015 as the Year of Soils. The International Union of Soil Sciences (IUSS), in 2002, proposed to observe the 5th December as “World Soil Day” [WSD] to create awareness among all stakeholders on the importance of soil as a critical component of the natural system and as a vital contributor to human commonwealth through its contribution to food, water and energy security and as a mitigation of biodiversity loss and climate change. These occasions remind all stakeholders associated with agriculture all over the world to put in all efforts to promote scientific management of soil resources for soil protection, conservation and sustainable productivity.

Abstract

Three-point bend test (three point bend ring-HDP/3PB) for five types (Good day, Butter bite, Marie, Krack Jack and Salted) of commercial biscuit brands (Britannia, Supreme, Parle, Lancer, Priya Gold and Dalmia) was developed using TA-XT2, texture analyzer and probable factors affecting the results were assessed. Maximum force to break the biscuits, number of fracture before break, thickness of biscuits and percent break point penetration were found in the range of 1006.5 to 3456.5g, up to 3, 4.2 to 6.3mm and 5.54 to 22.62%. The rupture of biscuits were observed on the basis of probe penetration into the biscuits and found that maximum resistance for penetration offered by Marie whereas minimum by salted biscuits, which was respectively the hard dough and fermented dough biscuit varieties. The analysis of variance for the results revealed that there is significant difference (P£0.01) in the maximum force of break for the biscuit types and brands individually or in combination. Difference in the thickness of biscuits was also found significant among types and commercial brands. The number of fractures was not consistent among the types as well as biscuit brands before reaching the maximum force of breaking the biscuit.

Introduction

During the first 50 years of the 20th century, scientific focus was on the identification of essential elements and their role in the prevention of various dietary deficiency diseases. This emphasis on nutrient deficiencies or “undernutrition” shifted dramatically, however, during the 1970s when diseases linked to excess and “overnutrition” became a major public health concern. “Let food be thy medicine and medicine be thy food”, the age old quote by Hippocrates is the ideology of today’s health conscious population. Eli Metchnikoff, the Russian Nobel prize winner was the first one to recognize the beneficial role of selected bacteria on gastrointestinal tract of humans. Subsequently the “Theory of Longevity” by Metchnikoff was correlated with prolonged youth and a healthy old age, observed largely in Balkan peasants of those times, who used cultured milks in their diet (Kaufmann, 2008). Since then, the quest continues for understanding the role of wide range of food components and nutrients in enhancing health or preventing chronic diseases. The research in this field has resulted in a plethora of new labels for pro-, pre- and synbiotics.

Materials Required

Tomato fruits, pulper, steel pans, weighing balance, refractometer, sugar, salt, spices, acetic acid, citric acid, muslin cloth etc.

Procedure
I. Puree

    1.    Extract fruit pulp by Hot process as told by the teacher.
    2.    Record the TSS of the pulp.
    3.    Concentrate the pulp by heating to 12º Brix (heavy puree)
    4.    Hot fill the boiling puree into pre-sterilized glass bottles (200 ml cap.)
    5.    Seal the bottles by crown corking
    6.    Heat process in boiling water in a big aluminium pan for 15-20 min. 
    7.    Cool the bottles to room temperature as quickly as possible.
    8.    Label and store at a dry place.

Abstract

There is an urgent need to – create market driven linkages rather than do it alone by building new infrastructure. A lot needs to be done to improve infrastructure in terms of reducing the logistics cost, eliminating middlemen influence and eliminating the wastage of basic inputs. There is a need to blend technologies based on principle of dovetailing production for masses with the advantage of mass production, particularly in the area of grain processing, packaging and marketing which would help combine livelihood, security with agricultural competitiveness. Risk in crop production is not new to any age and the farmers have been bearing it since times immemorial. The farmers should be allowed to maximize their grain. High performance continuous and batch dryers remove moisture in a way that is predictable and reliable. The problems associated with moisture content may be harmful to international trade in grain and need to be addressed adequately by the standardization institutions.

Abstract

A survey of various wheat milling units (atta chakki) available around Indian Agricultural Research Institute, New Delhi was conducted to study the performance of these. The mills of various sizes (12", 16", 18", 20", 24" and 30" stone disc diameter) with horsepower ranging between 2 to 20 are in operation. Both horizontal and vertical disc types of mills are in use. The capacity of these units ranges between 10 kg/h to 200 kg/h. The stationary sieve, hand sieve, pedestal/exhaust fan are used for cleaning. The average wheat cleaning cost is Rs. 200 per ton. A small room of 8' x 10', 10' x 10' and 10' x 12' size is used for running the mills and storage of wheat grains. The grinding charges (Rs./q) of wheat, coarse grains (maize, sorghum, millet etc) and spices are 100, 200 and 1000, respectively. Sample of 500 g of wheat and flour were collected from each chakki and were analysed for wheat grain and flour quality. Infested, damaged grains were observed to be in 2-10% range. Sieve analysis of the flour was done and the average particle size, fineness modulus and uniformity index of the flour were calculated. Average particle size, fineness modulus and uniformity index were found in the range 0.1875 to 0.2023 mm, 1.052 to 1.297 and 0:1:9, respectively. Average particle size of the flour obtained from horizontal mills was found to be higher than vertical mills. Temperature of the flour at the outlet was observed in between 45 and 50°C at room temperature of 18.5°C.

Introduction
Food preservation refers to an art or science which deals with the process of prevention of decay, deterioration or spoilage of food commodity to allow it to be stored in a safe condition for future use. All foods gradually undergo deterioration or spoilage from the time immediately they are harvested or manufactured. Some commodities spoil rapidly, while others can keep longer but for limited periods. The basic purposes of food preservation are:
1. Extension of shelf life of foods thus increasing the supply
2. Ensuring the availability of seasonal foods throughout the year
3. Adding variety to the diet
4. Saving time by reducing preparation time and energy
5. Stabilizing farm prices and prices of food
6. Improving the nutritional qualities The food spoilage can be caused due to growth and activity of micro-organisms, insects or rodents, action of enzymes, chemical reactions and physical changes that takes place during processing, drying, or freezing etc. Classification of Food Depending upon the type of spoilage and level of perishability, the foods are classified into three broad categories:

Introduction: Food processing involves different steps from receiving raw material, preparing for product manufacture, and packaging to storage. All these steps are called unit operations. They are broadly categorized as raw
material preparation (receiving, sorting, grading, washing, peeling, blanching, slicing, cutting, dicing etc), processing (canning, drying, pulping, juicing, product manufacture like jam, jelly, preserves, candies, pickling, sauce making, etc.) and post-production handling including packaging and storage. A brief detail about each unit operation is discussed as under:
1. Raw Material Handling
Material handling includes varied operations such as hand or mechanical harvesting on the farm, transportation in trucks or refrigerated vehicles of perishable produce to the market or to the processing plant or to store/godowns. For conveying, a wide variety of mechanical conveyors is used depending on the type of material. Common conveyors used in the processing plant include screw conveyors, bucket conveyors, belt conveyors and vibratory conveyors. Throughout these operations, care is taken to maintain sanitary conditions, minimize bruises and product loss, maintain raw material quality like physical appearance, and vitamin contents, minimize microbial growth and minimize other detrimental changes to the product quality during handling etc. It also includes other unit operations like receiving, cleaning/washing, sorting, grading, peeling, halving, slicing, blanching etc for preparation of fruit and vegetables for processing.

Fruits and vegetables are important part of our dietary, which are rich source of nutrient (carbohydrates, protein, fat, vitamins, minerals, and dietary fiber). Carbohydrates, protein and fat are macronutrients, considered as energy sources. Vitamins and minerals are micro nutrient, play important role in body building. Fibers have several direct and indirect advantages. ICMR, New Delhi recommends 125g of leafy vegetables, 100g of root and tuber vegetables and 75g of other vegetables (total 300g/day) and 85g of fruits per capita every day for balance diet.

Maturity

It is derived from Latin word ‘Maturus’ which means ripen. It is that stage of fruit development, which ensures attainment of maximum edible quality at the completion of ripening process.

Maturation

It is the developmental process by which the fruit attains maturity. It is the transient phase of development from near completion of physical growth to attainment of physiological maturity. There are different stages of maturation e.g. immature, mature, optimally mature, over mature.

Maturity Indices

The factors for determining the harvesting of horticulture commodities according to consumer purpose and type of commodity.

Maturity Indices is two type

Fruits and vegetables are living tissues subject to continuous change after harvest. Some changes are desirable from consumer point of view but most are not. Post-harvest changes in fresh fruit cannot be stopped, but these can be slowed down within certain limits to enhance the shelf life of fruits. The post-harvest handling plays an important role in extending the storage and marketable life of horticultural perishables.

Post Harvest Treat ment of Fruits and Vegetables Washing

It is useful in removing surface adhering material water. Mechanically, it is also accomplished by passing the fruits/vegetables through machine arranged with water tank equipped with rotating brush. In some produce washing improves appeal by facilitating removal of sap as case in mango, papaya, jackfruit, kronda, dirt in case of carrot, reddish, turnip, sugar beet, sweet potato, etc. and for removal of debris in case of banana. The water use for the purpose should be cleaned otherwise fungal and bacterial levels may build up. Disinfected treatment using ultraviolet light, ozone, chlorine (100 ppm), calcium hydroxide, etc. help to clean water for washing purpose.

Importance of Food Additives

Food additives are chemicals, biochemical ingredients etc., which are added to food products for their technological benefits. These benefits may be to preserve the quality of food, to maintain and improve its appeal, to ensure its nutritional value and to provide innovations in new products with consumer appeal and satisfaction. Additives are also added to maintain uniform quality and to enhance quality parameters such as flavour, colour, texture etc. in large-scale production. They and their by-products ultimately become part of the food that is consumed and so they must be safe.

Additives may be direct additives, which are added deliberately to improve its sensory quality, nutritive value, stability, ease in processing and retention of quality during handling and retailing. There are also indirect additives, which are not added intentionally but get included into foods incidentally during handling, processing and packaging.

There are some guiding principles for the use of food additives. They should be justified for their technological effectiveness and purpose. They should be safe for use. There should be maximum adequate levels, absolutely necessary levels of usage and ADI (Acceptable Daily Intake) properly evaluated while considering its safety and permitted usage levels in foods. They should not be added with the intention of misleading consumers about quality. They should also not significantly affect adversely the nutritional quality of food products.

Purpose of Law

The Food Laws or Regulations are made in order to protect people consuming these foods from undue risks, which may arise from processing, transport, retailing and consumption of food products which may undergo contamination, spoilage, inclusion of harmful chemicals/microbes or at harmful levels. Besides safety, consumers are also protected by these laws with respect to quality, quantity and substance that the food products are supposed to represent. Finally, laws also aim to protect the consumers from Nutrition and Health considerations with special consideration being given to vulnerable group such as infants, pregnant women etc.

Food additives are chemical substances added to foods to improve flavour, texture, colour, appearance and consistency or as preservatives during manufacturing or processing. Herbs, spices, hops, salt, yeast, water, air and protein hydrolysates are excluded from this definition.

In many countries, the use of food additives is regulated, and food additives must be declared on food labels by using their chemical names or numbers. the use of any new additive in a particular food, they ensure that:

Physiological disorders refer to non-parasitic or inanimate disease of fruit crops, or it is the breakdown of tissue that is not caused by either invasion by pathogens or by mechanical damage. They may develop in response to an adverse environment, especially temperature or to a nutritional deficiency during growth and development. Physiological disorder is broadly classified into two broad categories. They are:

Canning is a process of sealing food stuffs hermatically in containers and sterilizing them by heat for long storage is known as canning.

Principle of Canning

Destruction of spoilage organism within the sealed container by means of heat.

Selection of Fruit and Vegetable

For canning fruit should be ripe but firm and uniformity mature and vegetables except tomato should be tender.

Grading

Selected fruit and vegetable are graded according to size and colour to obtain uniform quality. This is done by hand or machines such as screw grader and roller grader.

Removal of water from the food by non-conventional energy source like sunlight, wind, and a smoky fire. Drying (dehydrating) food is one of the oldest and easiest methods of food preservation.

Dehydration

Dehydration is the process of removing water or moisture from a food product under controlled condition like temperature, relative humidity, air flow, etc.

Principles of Drying and Dehydration

Drying removes the moisture from the food so that bacteria, yeasts and moulds cannot grow and spoil the food. It also slows down the action of enzymes, but does not inactivate them. Dried food items can be kept almost indefinitely, as long as they are not rehydrated.