eChapters

Concept of Delinting

Cotton seed clumps because of linters getting trapped on them after ginning. Gin-run seeds have very low flowability and do not singulate, making cleaning, upgrading, and precise metering in planting operations challenging or impossible. To singulate the seed and increase flowability, a variety of techniques have been and are employed. Most of the techniques entail removing the tags and linters entirely or partially, although other coating techniques have also been attempted with mixed results, both financially and technically (Mezynski, 1966; Webber and Boykin, 1907).

Methods of Delinting

1. Mechanical Delinting

Mechanical delinting is the usual technique used to improve the flowability of cotton seed. As previously indicated, mechanical delinting basically involves resharpening with finer, closer-spaced saws to remove part of the commercially valuable linters.

Fruit juices which do not undergo alcoholic fermentation are termed as unfermented beverages. They include natural and sweetened juices, RTS, nectar, cordial, squash, crush, syrup, fruit juice concentrate and fruit juice powder. Barley waters and carbonated beverages are also included in this group.

The proposal presented takes into account the rationale of using natural source of immunity, discarding any preservatives or artificial flavors and additives. Collection of fresh produce followed by processing of fruits and vegetables, in the form of a veggie mix slushy which is ready to eat, ready to cook and easy to digest, through the use of sustainable retorting technology. The proposal takes into account the major problems regarding food for the elder like lack of digestion, in sufficient appetite, lack of value in terms of vitamins and minerals of food, also targeting the notion of feeling sick by taking multi vitamin and immunity tablets on a regular basis.

Diverse categories of Food Products such as canning, preservation of fruits and vegetables, processing of poultry products, dairy goods and many more present different challenges for wastewater disposal and regular use of water. A significant source of environmental pollution is the dissipated water generated from food product development and other agricultural tasks. This waste is being considered the most strenuous and requires a high amount of capital to convert this waste into reusable waste and the main reason behind this is different nutritional components such as inorganic and organic carbon compounds, nitrogenous elements, suspended and dissolved solids, high amount of biochemical and chemical oxygen demands (BOD & COD).

As a result of a number of health advantages provided by functional foods, a substantial rise in their popularity has been seen in recent years (Keservani et al., 2010).

Stored grain pests are one of the major constraints in obtaining quality seeds. They cause substantial yield loss in storage conditions affecting both the quality and quantity of the produce. Apart from causing direct loss to the grains, they also make them unfit for consumption through their excreta, scales and wings resulting in development of unpleasant odour (Upadhyay and Ahmad, 2011). They also act as a source of medium for growth of fungi or bacteria (Daglish et al., 2018). The method of infestation of stored gain pests is different from the insect pests infesting crops under field condition. Generally, the infestation of storage pests starts after harvesting. It has been reported that in India, there is a loss of about 14 million tons worth Rs. 7000 crores due to the infestation by different storage pests (Chaubey, 2022). The post-harvest loss in terms of quantity and quality by different storage insect-pests accounts for about 10-30 per cent (Rajasri and Kavitha, 2015; Yaseen et al., 2019).

Jam is prepared by boiling the fruit pulp with required quantity of sugar to thick consistency, firm enough to hold fruit tissues in position. It should contain not less than 68.5 per cent soluble solids. Jam may be made from a single fruit (apple, strawberry, banana, pineapple etc.) or from combination of two or more fruits. Jam contains 0.5-0.6% acid and invert sugar should not be more than 40%.

Organic meat food products are choice products for health conscious people. These are the products produced mainly in most natural way without using fertilizers, pesticides and growth regulators in their feed and fodders. In addition, meat animals are also reared without growth hormones, antibiotics drugs etc. and grazing of the animals is a prerequisite in organic farming system.

The term organic farming was first time used by Lord Northbourne. The term organic farming was derived from his concept of “the farm as organism”. It is a holistic, ecologically balanced approach to farming. In 1991, the European Commission formulated the first government system to regulate organic labelling. In India, standards for organic agriculture were announced in May 2001 and the National Programme on Organic Production (NPOP) is administered under the Ministry of Commerce. The concept of organic meat food products has been emphasized now a day due to animal welfare point of view, consumer’s conscious ness, less residue level of chemicals, antibiotics and drugs, Bovine spongiform encephalopathy (BSE), Foot and mouth disease (FMD), genetically modified food etc.

Organic meat food products as a whole are dependent on the life stages of the livestock like its origin, feeding, housing, health, breeding, transportation and slaughter. The other factors accounting for organic foods are its production, harvesting, preservation and processing. Inspite of low growth rate of organic red meat globally, growth in dairy, egg and poultry is increasing day by day. At present 1.2 million hectares (0.6%) of Indian land is producing organic products (Willer and Kelcher, 2011).

Most of the starch sources are cereals (40 to 90%), tubers (65 to 85%), roots (30 to 70%), legumes (25 to 50%) which contain nearly 70% of starch on dry basis (Santana & Meireles, 2014). Major application of starch is seen in food production, where it is used as a thickening agent, for stabilization, adsorption, gelling, for binding aromatic compounds and as a film forming agent as well (Subaric et al., 2007). About 0.8-3.2 tons of CO2 per ton of plastic can be saved by using starch-based plastics (Patel 1999).

Introduction

While experimenting with chemicals, sometimes we need to dry the chemical/ solution (solid, liquid or gas) using a process like evaporation or distillation, mainly to remove water or different solvents. Drying is the process of evaporation or distillation to remove water/solvent from a solution, solid or even from gas. Generally, a drying agent (usually an anhydrous inorganic salt) is used for this process, which reacts with the water (present in the chemical/ solvent to be dried) to form a hydrate. For example, anhydrous MgSO4 is one of the drying agents. The drying agents are recognized by their capacity (the rate at which they absorb water) and their intensity (the amount of water left behind in the solvent at equilibrium). No chemical reaction or change in phase occurs during the drying process.

Type of Solvents

Apart from water (a universal solvent), there are three families of organic solvents used in laboratories.

1) Oxygenated solvents: Alcohols, Ketones, Glycol ethers, Glycol esters, etc.

2) Hydrocarbon solvents: Aliphatic and Aromatic hydrocarbons.

3) Halogenated solvents: Chlorinated hydrocarbons.

Packaging is an essential tool to make products stand out from the competition. Beyond the shelf appeal, packaging also provides protection to the contents from physical, chemical and microbiological hazards. However, a lesser known fact is that the same packaging material could also be a source of chemical contaminants, and hence, may impact food safety as well as food quality. Among the different components of packaging material, packaging inks play a critical role as they might hamper product and consumer safety.

Each packaging ink is a mixture of different chemicals and some of these chemicals might be harmful with the potential to migrate to the foodstuff. In terms of risk, the chemicals could be toxic, carcinogenic, mutagenic, repro-toxic and even endocrine disruptors. The chemical contaminants from the packaging inks can get transferred to the foodstuff by a process called migration.

Over the last two decades, a number of scientific papers have been published, revealing the migration potential of substances from the printed matter. However, the first big scandal that brought the subject alive was about the f indings of isopropyl thioxanthone (ITX, a low molecular photo initiator used in UV inks) in baby milk and other liquid foodstuffs all over Europe, resulting in a product recall in the year 2005. The food scandal alerted the packaging chain about the linkage between packaging inks and food safety. Consequently, the authorities issued strict regulations for the application of printing inks as well as general food control measures.

1.    I deem it a singular honour to deliver Dr. Sen Memorial Lecture. Dr. Sen, who was both an administrator and a visionary, was instrumental for:

A number of quality management tools are being used in food processing industry. Often selection of such tools are tough as it involves several factors for decision-making. The problem of choice of quality management and tools can be solved by selection on the basis of the objective decision making process rather than on the opinion of the decision makers (Sukkarn and Thawesaengskulthai, 2015).

Previous Year Questions

1. Write down the various programmes run by state & central govts for ensuring food security in our country. Briefly discuss the strategies for sustainable agricultural production (20M, CSE 2023)

2. How will national food policy help in sustainable food security? (CSE 2020, 10 marks)

3. Discuss the national initiatives for food and nutrition security. (8M, IFoS-2019)

4. What are the special schemes for providing food grains to underprivileged, destitutes and malnourished populations (CSE 2016, 12.5 marks)

5. National and international food policies. (10M, IFoS-2016)

Introduction

For agricultural applications as well as for research work, often we need to prepare solutions of different agrochemicals of varying strength, as per the requirements. Agrochemicals are used to help crop plants grow, produce, and protect them from biotic/abiotic stresses. Many of the agrochemicals (insecticides, herbicides, fungicides, rodenticides, molluscicides, nematicides, etc.) are used to protect the crop from insect pests and diseases. However, some of them (fertilizers and soil conditioners) are used to augment crop yield. While in the previous chapter (Chapter 8) we discussed about preparation of laboratory solutions, in this chapter we will briefly discuss about the preparation of different agrochemicals.

Agrochemical/agrichemical is a generalized term used for the chemicals applied in agriculture. In general, it also includes the feed-supplements used in f isheries and animal husbandry.

Agrochemicals

Fertilizers

Fertilizers are used to augment growth of crop plants and to mitigate nutrient deficiency in the soil. Fertilisers can be organic (containing natural substances, prepared through natural processes) and inorganic fertilisers (synthetic fertilizers, manufactured artificially using chemical processes using natural deposits, by chemical alterations).

Soil Conditioners

Soil conditioners include manure, livestock and leaf compost, peat that help making the soil in good condition. They are laid on the top soil and then mixed properly. They not only increase nutrient contents in the soil but also improve aeration and water holding capacity.

Edible bananas are classified into several main groups and subgroups. In the first place is the diploid M. acuminata group which originated in Malaya, Indonesia, the Philippines, Southern India, East Africa, Burma, Thailand, the West Indies, Colombia and Brazil. This group is characterized by dark-brown sheaths of pseudostem,  and the leaves are nearly free from wax. The bunches are small and the fruits small, thin-skinned and sweet. Cultivars of this group are more important in New Guinea than any where else. Lady Finger which was popular in Queensland and New South Wales belonged to this group.

In second place, there was a group represented by the prominent and widely cultivated ‘Gros Michel’ originally from Burma, Thailand, Malaya, Indonesia and Ceylon. It was introduced into Martinique early in the 19th Century by a French naval officer and, a few years later, was taken to Jamaica; from there it was carried to Fiji, Nicaragua, Hawaii and Australia, in that sequence. It is a large, tall plant bearing long bunches of large, yellow fruits, and it was formerly the leading commercial cultivar in Central Africa, Latin America and the Caribbean, but has been phased out because of its great susceptibility to Panama disease. It has given rise to several named sports or mutants (Mortan, 1987). 

Previous Year Questions

1. Discuss the strengths and weaknesses of Public Food Distribution system in India. (8M, IFoS-2022)

2. Describe the vicious cycle of poverty and enlist the existing policy instruments for combating malnutrition. (20M, CSE 2022)

3. Enlist and explain the efforts of the GOI in streamlining the current levels of poverty (10 marks, CS 2022)

4. Enlist and explain the salient features of Public Distribution System as per the provisions of the National Food Security Act, 2013. (10M, CSE 2022)

5. Discuss the strengths and weaknesses of public food-grain distribution system in India. (8M, IFoS 2020)

4.1    Importance of Banana in International Trade
    
4.2    Major Exporting Countries
    
4.3    Major Importing Countries
    
4.4    World Market Structure for Fresh Bananas
    
4.5    Domestic Trade
    
4.6    Banana Trade Wars : A Glimpse
    
4.7    Fair Trade Bananas

Wood apple (Feronialimonia) commonly known as Bael in various Indian sub-continent languages is the most under-utilised fruit despite of its aromatic flavor, high nutritional components and important medicinal values. Reason may be due to challenge in harnessing the pulp from the fruit. It is considered under seasonal fruit but it has long duration of shelf-life as compared to other fruits.The physic-chemical characteristics revealed that it has high shell weight of 55.67% as compared to pulp weight of 43.77% (Devi et al. 2018).

7.1    Pre-Harvest Factors Responsible for Post Harvest Losses
    
7.2    Harvesting Method
    
7.3    Post-Harvest Causes Responsible for Losses