eChapters

Ice bank cooling: Storing of fruit and vegetable in storage chamber with positive ventilation and system countries where ice formation is allowed during night time (as electricity cost of night is less as compared to the day time). Melting of ice occurs during day time and with proper air circulation by means of ventilation process, approximately 0.5 10C temperature with 90% RH in the chamber is maintained. Ice Bank Cooler / Air forced cooler leads to desiccation of the produce (Plate 359). So use forced air high humidity cooler and these are known as Ice Bank Cooler. Ice bank coolers are useful for strawberry.

Ice cream: Ice cream may be define as frozen dairy product made by suitable blending and processing of cream and other milk products together with sugar and flavour.

Ice cream cone: A thin crisp edible cone for holding ice cream and filled with ice cream.

Ice point: It is the temperature of equilibrium between ice and water under normal atmospheric pressure (Plate 360).

Ichthylogy: It is the branch of the zoology that deals with the study of fishes (Pisces).

Icicle: It is small tapering piece of the ice formed by freezing of dropping water (Plate 361).

Oil palm is a major source of edible oil globally and plays a crucial role in meeting the dietary needs of millions of people. India has been focusing on expanding oil palm cultivation to reduce its dependence on imported edible oils. Oil palm can yield high oil compared to other vegetable oils. Palm oil production rate depends on post-harvest handling, and milling and extraction processes. After harvesting, some quality changes occur in oil palm fresh fruit bunches which leads to reduce the oil quantity and quality. With proper handling of post-harvest bunches and adapting best extraction methods can increase the oil yield and quality. Palm oil alone has the potential to make India sustainable in edible oil production.

Introduction

Oil palm (Elaesis guineensis Jacq.) originated in the tropical rain forest of western Africa and is now being cultivated in more than 45 countries around the world especially tropical regions i.e., Malaysia, Indonesia, Thailand, Nigeria, Columbia, and Ghana. This crop was introduced in India during the early 1990s, to meet the demand and to attain sustainable edible oil production in India due to its high oil-yielding capacity compared to other vegetable oil crops. It produces two distinct oils, i.e., palm oil and palm kernel oil. Palm oil is derived from fleshy mesocarp of the fruit and palm kernel oil obtained from the kernel of stony seed.

    1.    Nutrients : Chemical substances obtained from food and used in the body to provide energy, structural materials, and regulating agents to support growth, maintenance, and repair of the body’s tissues. Nutrients may also reduce the risks of some diseases.
    2.    Carbohydrate, fat, and protein are sometimes called macronutrients because the body requires them in relatively large amounts (many grams daily). In contrast, vitamins and minerals are micronutrients, required only in small amounts (milligrams or micrograms daily).
    3.    The international unit for measuring food energy is the joule, a measure of work energy. To convert kcalories to kilojoules, multiply by 4.2; to convert kilojoules to kcalories, multiply by 0.24.
    4.    Essential nutrients : Nutrients a person must obtain from food because the body cannot make them for itself in sufficient quantity to meet physiological needs; also called indispensable nutrients. About 40 nutrients are currently known to be essential for human beings. Energy-yielding nutrients: the nutrients that break down to yield energy the body can use:

    1.    Absorbance (A) - Defined as –log (1-a) = log (1/t), where ‘a’ is the absorbance and‘t’ the transmittance of a medium through which a light beam passes.

    2.    Absorption coefficient (a) - The relative decrease in the intensity of a collimated beam of electromagnetic radiation, as a result of absorption by a medium, during traversal of an infinitesimal layer of the medium, divided by the length traversed.

    3.    Acceleration due to gravity (g) - The standard value (9.80665 m/s2) of the acceleration experienced by a body in the earth’s gravitational field.

    4.    Acid - Historically, a substance that yields an H+ ion when it dissociates in solution, resulting in a pH< 7. In the Brönsted definition, an acid is a substance that donates a proton in any type of reaction. The most general definition, due to G.N. Lewis, classifies any chemical species capable of accepting an electron pair as an acid.

    5.    Acid dissociation constant (Ka) - The equilibrium constant for the dissociation of an acid HA through the reaction HA + H2O1 A- + H3O+. The quantity pKa = -log Ka is often used to express the acid dissociation constant

    6.    Acyl groups - Groups formed by removing the hydroxy groups from oxoacids that have the general structure RC (=O) (OH) and replacement analogues of such acyl groups.

    7.    Adiabatic process - A thermodynamic process in which no heat enters or leaves the system.

Fruits and Vegetables are highly perishable in nature due to which huge spoilage (damage) takes place during the period between harvesting and consumption. Fruits and Vegetables after harvesting are often poorly handled and in many cases neither cleaned nor washed. Improper handling may cause physical damage due to tissue breakdown which results mechanical damages and physiological changes in harvested fruits and vegetables. Mechanical losses include bruising, cracking, cuts, microbial spoilage by fungi and bacteria and physiological losses include changes in respiration, transpiration, pigments, organic acids and flavour.

R - Enamel can: The acid resistant, gold coloured enamel treated can are called R enamel cans. It is used for canning of acidic food which have soluble colouring pigments.

R value: R value is a measure of resistance to the flow of heat through a given thickness of a material (insulation) with higher numbers indicating better insulating properties.

Rabbitto and putridity: The surface taint of the milk caused by Pseudomonas putrefaciens is called rabbitto and putridity.

Racking: An important operation for the wine production in which wine is siphoned off and is transferred to a fresh vat with the help of a false bottom. Racking is repeated decanting to remove the slowly setting cloud of the freshly fermented young wine. It is also called clarification. It is synonym to siphoning.

Rad: It is the unit of radiation dose being equivalent to the absorption of 100 erg/g of irradiated material.

Radappertization: It means complete sterilization of foods by using irradiation. It is equivalent to commercial sterility. High dose of the radiation (25-45 kGy) is required for killing all microbes.

Pickles known to be good appetizers, aid digestion and pallate are edible products preserved and flavoured in a solution of common salt and vinegar. Spices and oil may also be added. There are a number of pickles very popular in India i.e. mango pickle, cauliflower pickle, lime and lemon pickles, ginger chilli pickle etc. But, some pickles like Sauerkraut are not very common in India but are very popular in European countries.

Abstract

Designer foods are known by various names like medical foods, fortified foods, nutritional foods, nutraceutical foods, pharma foods etc. These foods are nutritious, maintain health and prevent diseases. Such foods must possess characteristics like modified composition; limit the presence of certain potentially harmful components and include certain desirable ingredients either naturally or by intentional addition. The term designer food emerged some years ago to describe foods tailored to specific concentration and proportion of nutrients that are important to health. These are designed and produced by using different approaches. The term ‘designer foods’ is subjected to change based on nutritional labelling regulations, new developments, consumer perceptions and expectations. Grain improvement through biotechnology emphasizes crop upgrading with a specific challenge to manipulate the endosperm composition in order to improve its intrinsic properties for diet and health. Breeding fruits with higher bioactive compounds for disease resistance and improved composition have stimulated interest in the nutraceutical and processing aspects of the fruits Nutritive and genetic interventions to alter milk composition for specific health and processing opportunities are gaining importance in dairy biotechnology. Designer eggs having modified fat provide choices with different nutritional benefits. The options suggested for designer meat and meat products are through production practices, post-harvest procedures and reformulation techniques. All these features of designer foods will be presented with suitable examples.

Canning : Process of preservation of various food stuffs including fruits and vegetables whole or in pieces, in sugar syrup or brine by heat processing them in hermetically sealed containers.

Abstract

Research has demonstrated that nutrition plays a crucial role in the prevention of chronic diseases as most of them can be related to diet. Functional food enters the concept of considering food not only necessary for living but also as a source of mental and physical well-being contributing to the prevention and reduction of risk factors for several diseases or enhancing certain physiological functions. One of the most clear objectives of the study of functional foods is to identify and validate biological markers in order to understand the interaction mechanisms between the food component and a body function. Epidemiologic and laboratory data from previous studies suggests that diets rich in fruits and vegetables are associated with a reduced risk of various types of cancers. The reduction in cancer risk may be attributed to the abundance of a family of specific compounds referred to as anthocyanins, which are found in various berries. Anthocyanins are water soluble pigments responsible for the blue, purple, and red color in many plant tissues Strawberry is one of “super fruits”, since they can form a significant component of the diet and are a potential resource of functional foods and nutraceuticals due to their antioxidant capacity and nutritional quality. Strawberries contain high levels of anthocyanins and they are also well liked by consumers. Popularity of strawberries in the consumer market makes them an ideal focus for chemoprevention studies. Strawberries are a rich source of phytochemicals (anthocyanins, catechins, the flavonols quercetin and kaempferol, and ellagic acid) and an important source of essential nutrients (ascorbic acid, potassium, folic acid, carotenoids, B-vitamins). Strawberries are consistently ranked among the top food sources of polyphenols and antioxidant capacity; the preventive and therapeutic health benefits of strawberries may be attributed to the synergistic effects of these bioactives and the nutrients contained in the fruit. These bioactive photochemical contribute the major health-promoting function. Strawberries have shown a remarkably high scavenging activity toward chemically generated radicals, thus making them effective in inhibiting oxidation of human low-density lipoproteins. Antioxidant activity of strawberries could contribute to the prevention of cancer, cardiovascular and other chronic diseases. Hence strawberry can be used as a vital and indispensible functional ingredient for the development offunctional foods and nutraceuticals.

Nutraceuticals and Health Foods

    1.    According to the International Food Information Council (IFIC), functional foods are “foods or dietary components that may provide a health benefit beyond basic nutrition.”

    2.    Nutraceuticals : A product isolated and purified from foods that is generally- sold in medicinal forms are usually associated with food. A nutraceutical is demonstrated to have a physiological benefit or provide protection against chronic disease (Coined originally by Stephen DeFelice in 1989, founder and chairman of the Foundation for Innovation in Medicine, USA).

    3.    The International Life Sciences Institute of North America (ILSI) has defined functional foods as “foods that by virtue of physiologically active food components provide health benefits beyond basic nutrition

    4.    Health Canada defines functional foods as “similar in appearance to a conventional food, consumed as part of the usual diet, with demonstrated physiological benefits, and/or to reduce the risk of chronic disease beyond basic nutritional functions.”

Abstract

Micronutrients and bioactive compounds must be part of the population's diet in sufficient amounts to meet the body's needs. The concentrations of micronutrients and bioactive compounds in plant foods at harvest are known to vary with such factors as the variety or cultivar, stage of maturity, geographic or climatic effects, etc. Most subclasses of polyphenols e.g., phenolics acids and flavonoids, the effects of processing on the contents were found negligible in comparison to the differences between varieties of plants but carotenoids are among the food components most affected by environmental and processing conditions. Thermal processing has long been known to cause significant losses of vitamins, carotenoids and anthocyanins. The heat treatment viz. blanching, pasteurization, sterilization etc. result in losses of thermally labile nutrients and bioactive compounds, but the inactivation of oxidative and other degradative enzymes (e.g., lipoxygenase for carotenoids, polyphenol oxidase for flavonoids, ascorbic acid oxidase for vitamin C). Nutrients in dehydrated products are more likely to undergo degradation during storage because of the greater surface area exposed to oxygen and light. Blanched products generally resist decomposition better than unblanched foods during storage. Compared to losses during processing, subsequent storage often has a small but significant effect on vitamin and bioactive compound contents. Reaction rates are relatively slow at ambient or reduced temperature. The processing method chosen, and storage condition applied finalise the retention of these compounds which decreases with longer processing time, higher processing temperatures and storage of the food.

Food Processing Technology

    1.    The transition from solid to fluid and back is known as a phase transition and this is important in many types of food processing (e.g. water to water vapour in evaporation and distillation and dehydration; water to ice in freezing and freeze drying or freeze concentration or crystallisation of fats.
 
    2.    Phase transition takes place isothermally at the phase transition temperature by release or absorption of latent heat, and can be represented by a phase diagram.

    3.    A second type of transition, known as glass transition, takes place without the release or absorption of latent heat and involves the transition of a food to an amorphous glass state at its glass transition temperature.

    4.    The transition is dependent on the temperature of the food, time, and the moisture content of the food.

    5.    The density of a material is equal to its mass divided by its volume and has units of kgm^-3

Packaging

Packaging is a mean or system by which a fresh or processed product will reach from the production center to consumer in safe and sound condition at an affordable price.

Objectives of packaging and packaging materials

The primary objective or packaging is to protect the contents during storage, transportation and distribution against deterioration. It may be physical, chemical or biological. However, followings are objectives of packaging and packaging materials.

Abstract

Dietary fibers mostly include non-starch polysaccharides such as celluloses, hemicelluloses, gums and pectins, lignin, resistant dextrins and resistant starches. Based on their water solubility, dietary fibers may be divided into two forms insoluble dietary fiber which includes celluloses, some hemicelluloses and lignins which is fermented to a limited extent in the colon and soluble dietary fiber which includes f-glucans, pectins, gums, mucilages and hemicelluloses that are fermented in the colon. Resistant starch generally considered to be represented by the total amount ofstarch and the product of starch degradation that are not digested in the small intestine andpass into large intestine, and regarded as a component ofdietary fiber. Herbal nutraceutical is used as a powerful instrument in maintaining health and to act against nutritionally induced acute and chronic diseases, thereby promoting optimal health, and quality of life. Dietary spices in their minute quantities has an immense influence on the human health by their antioxidative, chemopreventive, antimutagenic, anti-inflammatory, immune modulatory effects on cells and a wide range of beneficial effects on human health. Nutraceutical is the hybrid of ‘nutrition’ and ‘pharmaceutical’. Nutraceuticals, in broad, are food or part of food playing a significant role in modifying and maintaining normal physiological function that maintains healthy human beings. Functional foods are including whole foods and fortified, enriched, or enhanced foods or dietary components that may reduce the risk of chronic disease and provide a health and physiological benefit beyond the traditional nutrients it contains.

1. Introduction

Osmotic dehydration is a useful treatment of dehydration compared to the other dehydration processes, as other dehydration processes bring adverse and irreversible changes in physical and nutritional status of food material. Recently in many studies it was found out that since plant membranes are semi-permeable in nature, not only moisture but transfer of solute from osmotic solution to the food material also takes place. Another kind of transfer which was also noticed is the leaching of micronutrients from the cells of food to the osmotic solution, but the amount being very low, this transfer can be neglected. (Mayor et al., 2006). The mass transfer kinetics was studied for different food materials (Hawkes and Flink, 1978). Effect of different variables such as pressure and temperature were also studied (Rastogi and Niranjan, 1998). The effective diffusivities for both water loss and solute gain can be calculated by using various methods which gives the rate of diffusion of solute and moisture for the food material. The finding of solute gain and leaching of micronutrients pointed the requirement of maintaining the osmotic dehydration process, which could be done by maintaining the process variables of osmotic dehydration. Impact of various process variables on osmotic dehydration and their best levels at which maximum water loss and minimum solute gain could be obtained had to be calculated out. For this purpose, optimization of process variables through response surface methodology (RSM) could be best utilized (Uddin et al. , 2004). RSM is a statistical tool which gives the random combinations of input variables to give the best output result as required. Various works have been done on optimization of process conditions of osmotic dehydration taking different samples of foods. In this study, bamboo shoot species (Bambusa balcooa) was taken as sample for osmotic dehydration to optimize the process variables for osmotic dehydration of bamboo shoots using salt as osmotic agent followed by calculation of effective diffusivity of water and solute during osmotic dehydration of bamboo shoot.

1. Introduction

Cherry peppers (Capsicum frutensis var. cerasiforme) which is locally known as dallae khorsani, is one of the important cash crops of Sikkim and Darjeeling hills. They are small, round shaped, fleshy and heavily seeded. They are green in color in early stage of fruiting and turn red when fully matured. It is an excellent source of vitamin A and C, which are important antioxidants (Howard et al., 1994). Cherry peppers are an ideal size for pickling or brining. Its hotness ranges from moderately mild to very high.

Due to its high moisture content (about 85% w. b. ), shelf life of cherry pepper is limited to 7 - 10 days. This makes it rare and costly during the off season. Hence, preservation of cherry peppers is of considerable importance both to the farmers as well as to the consumers. Drying is one of the oldest methods for preservation of cherry peppers to make it available throughout the year. To increase shelf life of chilies, drying up to 10 % moisture content (dry basis) is required which is accepted in export market.

For drying chillies, sun and hot air drying are the most common drying method used. However, due to the prolonged drying time of 16-48 h, the quality of the dried chillies is reduced (Kim et al., 2002). Many researchers paid more attention to innovative techniques such as short and medium-wave infrared radiation drying (SMIR) which not only maintain product quality, but also increase the drying rate. Moreover, infrared drying could save up 50% energy compared to convective drying (Nowak & Lewicki, 2004). The ability of infrared radiation to penetrate and heat the inner layers results in higher rate of heat and mass transfer (Ginzburg, 1969).

Abstract

Nutraceuticals have potential to be used as food supplement, preventive medicine and the growing evidence points in the direction that certain foods fight and or prevent against diseases. The development of next generation nutraceutical “super foods” or products consist of value-addition in the traditional natural diets.The word Nutraceuticals combine ‘nutrition’ and ‘pharmaceuticals’ to mean that they can be used as preventive drugs or food supplements. The increase in knowledge about the immune response unveils the fact that besides immunological disorders and infections the outcome of many other diseases like diabetes, hypercholesterolemia, rheumatoid arthritis, etc. can be modified by modulating Immune response. Hence, the efficient immunomodulators can be employed to prevent or cure the diseases as immunotherapeutic agents. The most acceptable alternative therapeutic agents are the edible sources. Hence the researchers shifted towards formation of nutraceuticals or foods acting as medicine, a concept which was given by Hippocrates long back.

Food Packaging

    1.    Food packaging : A wrap, pouch, bag, box, cup, tray, can, tube, bottle and jar are some of the many forms of packaging that contain food products. It must contain a food product as well as protect and preserve it for a specific length of time. Each package must, by law, display product information for the consumer.

    2.    Low Density Polyethylene (LDPE) is an economical material with low WVTR; however, it has high permeabilities to flavours/volatiles, poor grease resistance and are limp.
 
    3.    High-Density Polyethylene (HDPE) is stiffer, more translucent and has better barrier properties but needs higher temperature for sealing.

    4.    A copolymer of polyethylene and poly vinyl alcohol, and EVOH has outstanding gas barrier properties especially when dry.

    5.    High-density polyethylene is stiff, strong, tough, resistant to chemicals and moisture, permeable to gas, easy to process, and easy to form. It is used to make bottles for milk, juice, and water; cereal box liners; margarine tubs; and grocery, trash, and retail bags.

    6.    Low-density polyethylene is flexible, strong, tough, easy to seal, and resistant to moisture. Because low-density polyethylene is relatively transparent, it is predominately used in film applications and in applications where heat sealing is necessary. Bread and frozen food bags, flexible lids, and squeezable food bottles are examples of low-density polyethylene.

Abstract

The cereal grains are grown around the world, the most common is wheat, which accounts for one third of the total grain crop worldwide. In addition to providing energy, whole grains contain several key nutrients, including fibers, lipids, B vitamins and minerals as well as other beneficial components such as phenolic acids, flavonoids, lignans and phytosterols. Several of these components function as antioxidants. While multiple studies have been conducted to analyze antioxidants in different grains. In wheat and other grains, naturally occurring phytonutrients with antioxidant activity include phenolic acids, flavonoids, coumarins, polyphenols, phytates, terpenes, carotenoids, tocopherols and tocotrienols. Potential roles of the naturally occurring antioxidants in grains include free radical scavenger, reducing agent, complexation of prooxidant metals, quenchers of singlet-oxygen molecules and antioxidant defense enzyme system activators for biological systems. Wheat grain contains several components that have potential antioxidant activity and thus may have a protective role in human health. Traditional wheat-based breakfast foods include hot and cold ready-to-eat (RTE) cereals, as well as a variety of yeast-leavened and chemically leavened bakery products. Increasing baking time and temperature increases antioxidant activity in the bread crust and lowers antioxidant activity in the bread crumb portion. Wheat and wheat based products, particularly partial and 100% whole grain products have been shown to provide a variety of beneficial components including fiber, vitamins, minerals and other phytonutrients with antioxidant activity. Scientific evidence indicates that consumption of three or more ounce equivalents of whole grain foods per day may reduce the risk of coronary heart disease, type 2 diabetes and certain cancers and help with weight management.