eChapters

Introduction

India is considered as the “Home of Spices”. They are a prized group of minor components and have been an integral ingredient of Indian diet. Since antiquity, spices form an important part of the Ayurvedic Pharmacopoeia (The Indian System of Medicine), with their widespread traditional use. With its wide climatic conditions and topographical features, India naturally possesses wide variety of medicinal flora. The country enjoys the distinction of being the largest producer and consumer of spices as well as the fastest growing spice market in the world.

Spices are potent plant foods that possess a wide range of nutrient bioactive compounds that contribute to improve health, while adding variety, colour, flavour and aroma to daily diet. The term spice or condiment applies to “such natural plant or vegetable products or mixtures thereof, in whole or ground form, as are used for imparting flavour, aroma and piquancy to and for seasoning food” (Sikri and Berwal, 2008).

Webster (2011) describes spices as ‘Any of various aromatic vegetable productions as pepper, cinnamon, nutmeg, mace, allspice, ginger, cloves, etc., used in cookery to season and to flavour sauces, pickles, etc.; a vegetable condiment or relish, usually in the form of a powder; also, as condiments collectively’.

Abstract

Agro-food industries generate a large amount of by-products and wastes. These byproducts and wastes have a negative impact in terms of the environmental concern due to the increase of pollutant disposal, and industrial sustainability because of high costs related to their management. These byproducts and wastes are rich in minerals, sugars and proteins. The composition and characteristics of wastes from different food processing industries vary and rely upon the production technique and the nature of the product. India is the second largest producer of rice/paddy in the world and the utilization of rice bran is gaining importance. However, a small fraction of these have been utilized. In case of fruits and vegetables, industrial processing of potato generates between 70 and 140 thousand tons of peels worldwide annually. Moreover, 37% of world’s total annual production of banana is shared by India. Hence, to minimize the disposal fees and trash collection new policies and methods have been developed for handling and treatment of wastes and byproducts. This chapter envisages the status of different agro-food industrial byproducts and wastes for the development of different food and non-food products.

Abstract

Tremendous hike inworld population has increased thrust on the limited resources which has considerably affected the viability of the food. The emerging challenge for policy makers and food scientists is to put forward viable solutions. Utilization of underutilized crops/plants that act as good sources of starch could be explored in a better way for the sustenance of the limited sources like food crops/plants. The demand for starch and the foods containing starch has been increasing continually. Since, the starch in its native form has certain limitations in its functional properties to be used for different applications. Therefore, it becomes important to explore certain technologies which could be used for modification of starch. Among different technologies gamma irradiation ensures food safety while inducing physicochemical changes of the components. Although, the chemical modifications have been used widely so far but the concerns related to the chemical residues left are diminishing their demand. Hence, the physical processes particularly the gamma irradiation process has emerged as an efficient alternative with some benefits over other process like eco-friendly, economical, reliable and safe for altering the physico-chemical and biological characteristics of the product. Gamma Irradiation of starch has been successfully employed for the achievement of some desired physico-chemical, biological and functional properties of the foods and other related items. In this chapter, valuable impact of gamma irradiation on the physico-chemical, biological and functional properties of starch has been summarized.

Proper marketing of perishable commodities such as fruit and vegetables often requires some storage to balance day-to-day fluctuation between harvest and sale or for long term storage. Storage of horticulture produce is attempeted with a view to extend period of availability. Storage controls shelf life of produce by controlling rate of respiration, transpiration, ripening and biochemical changes all of which are responsible for shelf decomposition/deterioration of produce. Further, different types of storage have different attributes in minimizing microbial infection and thus add to better storability of produce.

Introduction
In India, the government policy regarding the import and export of processed fruits is primarily regulated by the Agricultural and Processed Food Products Export Development Authority (APEDA), which requires exporters to register with them to export notified processed food items, including processed fruits, and implement various export promotion schemes to facilitate this trade; the overall goal is to boost the export of agricultural and processed food products through the Agriculture Export Policy (AEP).
1. Key features ofAgriculture Export Policy (AEP)
i. Governing body: APEDA, established under the Agricultural and Processed Food Products Export Development Authority Act, 1985.
ii. Registration required: All exporters of processed fruits are required to register with APEDA to export their products.

Concept: It’s a natural process that modifies the cytology, physiology, biochemistry, and physical characteristics of seeds. These modifications lower viability and ultimately result in the seed’s death. A decline in the proportion of germination indicates degradation, and weak seedlings are produced by seeds that do germinate. The factors that impact the ability of seed to be stored include the seed’s quality at the time of storage, its pre-storage history (environmental factors during pre- and post-harvest stages), its moisture content or ambient relative humidity, the temperature of the storage environment, the amount of time the seed is stored, and biotic agents. Seed will inevitably get damaged when being stored (Balesevic-Tubic et al., 2005). The quality of the seed at the time of storage, its pre-storage history (environmental factors during pre and post-harvest stages), its moisture content or ambient relative humidity, the temperature of the storage environment, the length of time the seed is stored, and biotic agents are factors that affect the seed’s ability to be stored. Different physical changes can happen to seed during storage because of factors like temperature, moisture content, and length of storage. The viability and vigor of the seeds may be impacted by these modifications.

Fruits are an essential component of a human’s healthy diet. Fruits are used as a supplement to primary foods. When compared to grains, many fruits have far greater nutritional potential. The common fig is one of the most important and widely consumed fruits (Ficus carica).

Concept: Reduction of seed moisture content to the acceptable levels for enhancement of storability and longevity is known as seed drying.

The moisture content of seed is negatively related to its storability. As the moisture content of seed increases, its storability decreases. Adequate drying of seed prolongs viability for reasonably long periods without cold storage. The process of drying begins with physiological maturity till storage/packaging of seeds to avoid deterioration. The seed is hygroscopic in nature therefore it adjusts its moisture content in equilibrium to the existing environment.

Seed Drying

Seed drying is the process in which an environment with low humidity is created to remove moisture from the seed up to the desired level without any damage to its viability and physical appearance. This seed is stored at low moisture content under the low relative humidity to enhance its longevity. The initiation of seed moisture content and the desired level are what dictate the amount of the drying process, and these elements are determined by the following

• Type of seed: This will consider the longevity behaviour, seed content, and seed structure (i.e., how well the species stores energy).

Most traditional food processing techniques like boiling, cooling, freezing, and blanching are used in a home kitchen. But now-a-days, food processing and preservation industries combine these techniques with other processing operations by using different technical prospects. As a subset of traditional processing technologies, modern processing technologies include hot air sterilization, vacuum cooking and pulsed electric-field technology as well as high pressure treatment, extrusion, microwave processing, and pulsed electric field technology.

Lanolin, commonly known as Wool grease is primarily a lipid secretion from sebaceous glands of wool bearing animals. The role of Lanolin in nature is to protect wool and skin of animal from climate and the environment. It is an excellent emollient, self-emulsifying and dermatological safe for skin applications. Lanolin is a complex matrix since it is a mixture of high molecularweight esters of fatty acids with fatty alcohols, sterols, tri-terpene alcohols; diesters, long-chain alcohols & diols, long-chain fatty acids and hydroxy acids and is therefore difficult for effective matrix clean-up. Because of its water proofing and antimicrobial properties, lanolin is used mainly in cosmetic and pharmaceutical applications.

Fermentation in food processing typically is the conversion of carbohydrates to alcohols and carbon dioxide or organic acids using yeasts, bacteria, or a combination thereof, under anaerobic conditions.

In India the problems of protein energy malnutrition, anemia, and vitamin A deficiency are more prevalent among children and adolescents (Udayasree, Manjula, & Sowjanya, 2013). To overcome these problems, the need of nutritional compositions rich foods came into existence. One of such foods which constitute the most significant attention of nutrients is “Spirulina”. Spirulina is a common name for supplements derived mainly from two Cyanobacteria species, i.e. Arthrospira maxima and Arthrosepira platensis, which are human and animal.

A dilute solution of acetic acid produced by a two-stage fermentation process in the first stage, fermentable sugars is converted into ethanol by the action of yeasts and in the second stage, bacteria of the genus Acetobacter oxidize the ethanol to acetic acid.

Vinegar is a liquid produced from the fermentation of ethanol in a process that yields its key ingredient, acetic acid. The acetic acid concentration ranges typically from 4 to 8 percent by volume for table vinegar (typically 5%) and higher concentrations for pickling (up to 18%). Natural vinegars also contain smaller amounts of tartaric acid, citric acid, and other acids.

Pre-Treatment Before Sowing

The natural conditions necessary for seeds to germinate are increased by pre sowing seed treatment. Many plants and trees’ seeds require a specific amount of time to mature in their immature portions and to overcome dormancy, which is the absence of certain elements that impede germination, so that the seeds can sprout. Depending on the type of seed, different environmental factors promote different levels of germination. For example, some seeds need to be kept in a very damp, cold environment, while others need to be kept in a dry, hot environment. Different techniques are employed to support seed survival and speed up germination, depending on the size of the lot, the species, the local conditions, and the availability of pertinent tools and facilities. Many species’ seeds don’t germinate successfully unless they are exposed to specific circumstances. Dormancy is the state in which seeds do not germinate unless certain circumstances are met. Conditions in the natural world could include being near fire or being eaten by animals.

Drying is basically the unit operations which is used in many of the food industry nowadays. It can be desirably known as the process of removing moisture to relent a hard products. It is the transfer of energy source, mostly it derives heat from the outer environment to the dryer in which the food products is placed.

Genetically modified organisms (GMOs) can be defined as organisms in which the genetic material (DNA) has been altered in a way that does not occur naturally. The technology is often called “modern biotechnology” or “gene technology”, sometimes also “recombinant DNA technology” or “genetic engineering”. It allows selected individual genes to be transferred from one organism into another, also between non-related species. Genetically modified (GM) foods are foods derived from genetically modified animals and marines. Genetically modified animals and marines are those in which specific changes introduced into their DNA by genetic engineering using a process of either Cisgenesis or Transgenesis. These techniques are much more precise than mutagenesis where animals and marines are exposed to radiation or chemicals to create a non-specific but stable change. Other techniques by which food animals can be modified are selective breeding and somaclonal variation. By this means desired quality of meat, egg and other animal products can be produced. But it is a common thinking that foods derived from genetically modified animals and marines are far from safe. They are likely to be contaminated by potent vaccines, immune regulators and growth hormones, as well as nucleic acids, viruses and bacteria that have the potential to create pathogens and to trigger cancer.

Quality Standards and Laws

Quality is how well a product or service satisfies the needs of the customer. This includes all aspects related to the needs of the customer such as quality specifications, safetgy, delivery method or date, price etc. Quality can be interpreted in several ways as conformance to the standards, meeting customers’ preference/ satisfaction for desired quality attributes, degree of excellence and zero defect products etc. Because of education and consequent greater understanding of implications of poor quality commodities in recent years, consumers have become quality conscious and this fact is also applicable to food and food products. In order to strengthen competitiveness, quality must be incorporated throughout the value added chains right from the harvesting, handling, manufacturing, processing, packaging, storage, marketing and distribution stages, especially in the case of food and food products.

Introduction

To accomplish experimentations in laboratories, sometimes we need microscope to test/validate our ideas/findings. A microscope is needed to examine objects which are very small which cannot be visualised by naked eyes. However, microscopic study requires some expertise in operating the microscope, particularly the sophisticated microscopes, as well as to prepare (peeling, sections, cutting, fixation, staining, dehydration, mounting, etc.) the sample, so that it can be appropriately examined for the anticipated details.

According to the scientific requirements different types of microscopes are used in the laboratories for research purpose. In this chapter, our aim is to acquaint you with the basics of using and handling of microscopes, particularly a compound microscope that is commonly used by the graduate and post graduate students for basic research.

Microscopy is often designated as the scientific investigation that is employed to review and analyse minute structures and objects using a microscope. The term “microscope” has been derived from ancient Greek words “micros” meaning “small” and “skopeîn” meaning “to look at or see,”.

Microscope

A microscope is a laboratory instrument used to examine objects (biological specimens) which are too small to be seen by the naked eye. The microscope must accomplish three tasks:

• Magnification- to provide a magnified image of the specimen.

• Resolution- to separate the details in the image.

• Contrast- to render the details clearly visible to the eyes.

Although we will tnroduce to you the different types of microscopes used for different speciments, our main focus is to discuss about compound microscope, which is commonly used in the laboratories. Compound microscope was developed around the beginning of 17th century.

SYNOPSIS

The availability of food is of paramount importance without which it is hard for human beings to survive. The recognized way of making food available is to produce but it is also equally important that food produced is utilized well without loss of edible food materials. The paper discusses on unused food, under- utilized food within and across countries, and puts emphasis on utilization and handling of food. In perspective, the paper highlights the steps to be taken up to save and utilize the food already produced.

Jamun (Syzygium cuminii L. Skeels) is an evergreen tropical tree which belongs to family ‘Myrtaceae’. It is commonly known as java plum, jambul, jamun, black plum, faux pistachier, Indian blackberry, doowet and jambolan. Jamun is native to the subtropical Himalayas, India, Sri Lanka, Malaysia and Australia. Its fruits are delicious and have great importance in folk medicine (Ayyanar and Subash, 2012).