eChapters

Introdoction

Tillage is a prime activity carried out prior to sowing of a crop with an objective to bring the soil to a favorable tilth to provide a congenial environment for crop growth and yield. The operation of ploughing once and left out for a few weeks followed by a broadcasting of rice seeds by hand and then ploughing and raking together at the same time once gave highly significant rice grain yield (Srisa-ard, 2008). Adoption of the “Sawah” system (bunded, puddle and leveled) in inland valleys in Ghana lead to significant improvement in soil and water management; enhancement in rice grain yield and made sustainable production. Even the practice of Sawah system of cultivation increased local rice production by over 300% because of the mechanisms with intrinsic resistance to erosion (better water control and nutrient management (Buri et al., 2012).

Introduction

Agriculture is the most important sector of Indian Economy. The agriculture sector accounts for 18 per cent of India’s gross domestic product (GDP) and provides employment to 50 per cent of the countries workforce. India has emerged as the second-largest producer of fruits and vegetables in the world. Formerly agriculture was more dependent on nature and all the operations were carried out manually, however new technologies have been developed to increase the production and productivity of crops (Rangbhal, 2018).

Introduction

Irrigated agriculture plays a predominant role in the state’s food grain production. Erratic trend of rainfall, it has been realized that the availability of water will become very less in forthcoming days as a result cultivation of crops will face water crisis. Development of new water resources needs excessive money investment with high level of expertise and technical knowhow. The ground water is also falling down to greater and greater depth due to overdraft causing for the restriction of the construction of tube wells. Further the efficiency of traditional irrigation system in India is now varying from 30% to 40% against 62 to 65% during the project plan periodbecause of wastage of this valuable water resource due to mismanagement. To meet the increasing demand for additional food grain production, the demand for water in the irrigation sector will increase substantially. In such a situation conservation of water and its proper management is necessary for developing a sustainable agricultural system avoiding the degradation of the land quality, water and other natural resources in an irrigated area.

Introduction

Rice (Oryza sativa L.) is the vital cereal crop, probably the oldest cultivated grain crop, produced under varied ecosystems is consumed as the primary source of food by the billions of people throughout the world covering 9% of total arable land among world. India is one of the top leading countries in the entire world in case of both production and consumption of rice. Rice is cultivated in 43.86 m ha geographical area of the country producing 115.6 million tons (2018- 2019) of rice. It is produced in various ecosystems throughout the country under diverse climatic and soil condition but the productivity is much lower as compared to other countries. According to Pandey et al. (2006), the average loss of rice production during drought years in major rainfed rice grown states like Chhattisgarh, Jharkhand and Odisha was found to be 30 percent of the annual production in case of non-drought years.

Introduction

Chickpea (Cicer arietinum L. ) popularly known as Gram, Bengal gram, Egyptian pea, Chana, or Kabuli chana, Garbanzo bean is one of the first grain legumes to be domesticated by humans in old world (Van der Maesen, 1972). The genus Cicer belongs to the sub-family Papilionaceae of the family Leguminoceae (Bentham and Hooker, 1970) now popularly known as ‘Fabaceae’ and have chromosome number 2n = 2x = 16. The origin of the crop is considered to be Western Asia from where it has been transferred in India and other parts of the world (Rathore and Sharma, 2003). Importance of pulses is relatively more in our country as its contribution in nutrient supply is far more in Indian diet than that in Asia and world as a whole (Ali,2002).

Introduction

Smart farming focuses on retrieving data and using it in developing farming systems in a smart way that will yield better results. Such real time data can be readily accessed by the farmers through smart phones or tablets which will help them to take wise decisions at the right time. It helps in managing farms using technologies like IoT, robotics, drones and AI to increase the quantity and quality of products while optimizing the human labor required by production. Digital farming goes a step further and creates value from data. Integrating the concept of precision and smart farming, digital farming can be explained as “consistent application of the methods of precision farming and smart farming, internal and external networking of the farm and use of web-based data platforms together with Big Data analysis” (A paper on Digital Agriculture, 2018). Though such technologies are highly attractive and worth investing, they are also accompanied by uncertainty and trade – offs. Education, training, dissemination of information, finance and marketing are some of the major factors that would drive the farmers towards adoption of sustainable farming technologies (Grand View Research, 2019).

Introduction Sea buckthorn berry belongs to Elaeagnaceae having 6 species (Hippophae rhamnoides, Hippophae neurocarpa, Hippophae salicifolia, Hippophae gonicarpa, Hippophae tibetiana and Hippophae litangenis) and 12 subspecies grown all over the world. India, is having its plantations in chilly and barren conditions of Ladakh, Himachal Pradesh, Uttarakhand, Sikkim, and Arunachal Pradesh. Berries and fruits are believed to have such bio-active compounds like antioxidants in them that it has constructive consequences on health of human beings. Moreover, they are been proven in lessening the cardiovascular diseases, age related issues,cancer etc. Berries of Sea buckthorn is an abundant provenance of these bio-active compounds. One of the major lipophilic compounds is carotenoid pigments. And the concentration of the same has difference depending upon origin of plant, harvesting period and weather conditions. Nutritionally, the fruits have a substantial amount of carbohydrate, protein, organic acids, amino acids, and vitamins. Moreover, it also contains bioactive compounds like carotenoids, dietary minerals, antioxidants, flavonoids, vitamin C, minerals, monosaccharide, organic acids, tannins, etc. Sea buckthorn plant parts are becoming one of the useful and promising nutraceuticals for the food industry and all over the world.

Introduction Diet and dietary component are proved to be the first line of intervention in prevention and treatment of non-communicable diseases by many studies (R. Vrolix and R.P. Mensink, 2010). Hence the interest has grown in development of functional food product in recent years which provides not only basic nutrients but also has health promoting and diseases preventing properties (Rozek et al., 2010). The Functional Food Center (FFC) defines “functional food” as natural or processed foods that contain known or unknown biologically-active compounds; the foods, as defined, effective, and non-toxic amounts, provide a clinically proven and documented health benefit for the prevention, management, or treatment of chronic disease (Martirosyan et al., 2015). Fiber is classified into two separate groups i.e. soluble which forms gel like substance when comes in contact with water and insoluble is a solid form that does not break down when exposed to water (web 4). Soluble fibers increase total transit time by delaying gastric emptying and also slow glucose absorption, which includes pectins, β-glucans, galactomannan gums, mucilages, and some hemicelluloses (J.H.Cummings and A.M.Stephen 2007). The American Society for Nutrition stated that cereal fibers are modestly associated with a reduced risk of type II diabetes, obesity, and cardiovascular disease (Cho Qi, Fahey Jr & Klurfield, 2013).

Introduction Solid–liquid extraction process, has been extensively used for extraction of bioactive compounds from plant food matrices by using appropriate solvent, which can be used as functional ingredients and additives in food processing, pharmaceutical sectors, and others industries. Usually this extraction/recovery process is based on unsteady diffusion of compounds targeted for extraction, through the matrices followed by the dissolution of the extractable compounds in the bulk of the used solvent (Milic, Rajkovic, Stamenkovic, & Veljkovic, 2013). The concentrations of bioactive compounds in food matrices as well as in the extracts are generally low in percent, so extra energies are required to improve the yield of the extraction process while minimizing the overall cost. From the technological approach, extraction process is mainly associated with the operating variables such as solvent used, extraction technique, operating temperature, concentration of solid in solvent, and extraction time, and by optimizing these parameters extraction yield could be enhanced (Milic et al., 2013; Orphanides, Goulas, & Gekas, 2014).

Introduction India is a country of festivals and celebrations. Indian sweets enjoy a legendary reputation across the world. India is home to a number of delicious sweets that play a vital role in every Indian celebration. While gulab jamuns, rasgullas and kaju katlis may be the most popular sweets in the country (Pal Sanchari, 2016). Functions and events in India are celebrated with intake of sweets. Also, it is customary to sweeten the mouth in social gathering like marriage, birthday, poojas, etc. (Gulati and Misra, 2014). In the past few years, guidelines are formulated based on analyses of all published scientific studies on the consumption of sugars. In view of the rising prevalence of overweight, obesity and related disorders globally, in 2002, the WHO recommended that sugar should be less than 10 percent of daily calories. The consensus dietary guidelines for Indians in 2011 recommend less than 10% of total calories from free sugars per day. In May 2014, the expert panel of WHO recently recommended decreasing sugar intake to 5% of total calorie intake to combat obesity. A high intake of added sugars is a primary risk factor for diabetes. It is these added sugars in sweets that makes them palatable, but also does the physical damage. (Willet Brian, 2011). People have developed taste towards food in which fat and sugar contents are high.

Introduction Consumer demands for convenience and mildly processed meals with long shelf lives have led to unique and current developments in food packaging solutions (Dobrucka and Cierpiszewski, 2014). Additionally, the development of unique and creative packaging solutions that do not compromise food safety or quality is being fueled by the current retail trend and changing lifestyles (Dainelli et al., 2008). The widespread use of packaged meals has raised consumer demand for prepared foods like microwaveable dinners, and the growing popularity of smaller food packages all help to fuel the food industry's explosive growth in creative packaging (Restuccia et al., 2010). The rise in food-borne microbial outbreaks, which calls for the usage of packaging that possesses antimicrobial qualities while retaining food quality, is another major driver of new food packaging (Appendini and Hotchtkiss, 2002). The initial advancements in packaging were electrically powered packing equipment, flexible packaging, metallic cans, aseptic packaging, aluminium foils, and flexographic printing. A considerable movement away from metal, paperboard, and glass packaging in favour of plastic and flexible packaging was also brought about by the discovery of various materials such as polyester, polypropylene, and ethylene vinyl alcohol polymers.

Introduction Rice cultivation is a means of livelihood for a large number of people from the state of Assam, India (Saikia, 2019). It is related to the cultural aspects in rural Assam where people indulge themselves in traditional as well as modern ways of farming. Like any other north-eastern states in India, rice majorly dominates the Assamese cuisine. It is the primary source of diet in Assam. There are more than 100 varieties that are genetically modified breeds in which indigenous varieties contribute to 20 germplasm (https://www.rkbassam.in/). The different rice varieties of Assam have different culinary applications in both savoury and sweet cuisines. The intermediate and high amylose rice, parboiled or nonparboiled are consumed as staple for major meals while the low amylose rice is mostly consumed as snacks, breakfast cereals and desserts. The major constituent of rice is starch consisting of about 90% of the mass. Thus, the major compositional changes occurring in rice is due to starch. Starch is a polymer of glucose linked by glycosidic bond. It consists of amylose (linked by alpha 1- 4 linear chains) and amylopectin (alpha 1-4 & alpha 1-6 branched chains). On the basis of composition, rice is classified as high amylose (>25%), intermediate amylose (20 -25%), low amylose (7-20%) and waxy or glutinous (1–2%) types (Juliano, 1979).

Introduction A functional food is a food that provides alimentative beyond their actual nutritional value & are claimed to have an extra function by the addition of new ingredients or more of already present ingredients into it. Functional food have also become a part of our everyday daily diet & are told to offer potential various health benefits other than the widely accepted nutritional effects among them. (Roberfroid MB 2009). Many bioactive active compounds are contained by them like roughage, OS, vitamins, inorganic elements, & bacterium probiotic, having scented whiff, relish & fineness, which sustain the balance & balance of the enteric system. Functional may also be said as artificer‘s foods, NC, restorative foods, curative food, & super food etc because of the roles & functions they perform. (Wlodzimierz Grajek et al., 2008). There are many utilitarian sequels of functional food & beverages with added bug & probiotics on the health of humans which are increasingly promoted & recommended by the nutritionists & other we-being professionals. (Aditya Chaudhary 2019). For a time being, the most salient & over & over again used functional foods amalgam are probiotics & probiotics, or they altogether called as symbiotic‘. he dwell Microbes or foods microbes, which are beneficial for human, are probiotics. (Armachius James &Yousheng Wang 2019).

Introduction The onion (Allium cepa) is one of the world's oldest cultivated crops, with a history dating back over 5,000 years (Gorrepati et al., 2014). At present, India is one of the world's largest producers and exporters of onions. At the time, India ranked second in onion production with a yearly production of around 23262 TMT and an average yield of 18.10 MT/ha (Prajapati and Saini, 2019; Horticulture Statistics at a Glance, 2018; Tripathi and Lawande, 2016). Maharashtra, Madhya Pradesh, Karnataka, Gujarat, Rajasthan, Bihar, Andhra Pradesh, Haryana, West Bengal, Uttar Pradesh, Chhattisgarh, Odisha, Tamil Nadu, Jharkhand and Telangana are the major onion producing states in India. Maharashtra alone covers 55-60% of countries total production. Solapur, Satara, Dhule, Jalgoan, Osmanabad, Beed, Latur, Aurangabad are the major onion producing districts in Maharashtra (Tripathi et al., 2005). Unfortunately, India witnessed around 40-50% post-harvest losses of onions every year (Prajapati and Saini, 2019).

Introduction Flavour has a significant impact on consumer pleasure and subsequent food intake. Chemical synthesis or extraction are used to create the majority of accessible fragrance molecules. Synthetic flavourings are frequently shunned by customers who believe that hese compounds are harmful or pose a health risk to them. (Teixeira et al., 2004). The association between flavour stability and food quality and acceptance has piqued researchers' interest, yet it's tough to control. Food manufacturing and storage procedures, packaging materials, and ingredients frequently alter overall flavour by lowering the intensity of aroma compounds or introducing off-flavor components (Lubbers et al.,1998). Because there are so many variables in flavours, they constitute extremely complicated systems. Some are more stable in water soluble carbohydrates, whereas others are more stable in lipid-based coatings. Physico-chemical characteristics, concentration, and interactions of volatile aroma molecules with food components are just a few of the aspects that determine the overall quality of the food. It's a good idea to encapsulate volatile components before using them in foods or beverages to prevent fragrance degradation or loss during processing and storage. Encapsulation is the process of coating or encasing one material or a mixture of components into another material or system. The coating substance is known as shell, wall material, carrier, or encapsulant, and the coated material is known as active or core material.

Introduction In latest years, there has been an upsurge in customer situation over using artificial colorants in foods, especially on the subject of healthiness and safety issues (Amchova, Kotolova, & Ruda-Kucerova, 2015). Dietary colorants have been banned or regulated by the European Food Safety Authority (EFSA) and various other national authorities throughout the world because to their confirmed or suspected link to enhanced cancer progression or adverse reactions. For the same motives, various pigments are being investigated and are most effective provisionally authorized at this time. Consequently, the use of natural additives in food production is becoming increasingly popular among food companies (Schwartz, Joachim, & Giusti, 2007). Red C-PE is the most extensively used colour and has various application in food, cosmetics, and pharmaceutical industries; however, because they are rare in nature, they must be synthesized. Therefore, the food sector is expressing an increasing interest in the finding, application, and stabilizing of natural red colorants, which are currently in high demand. A growing number of commercial companies are turning to cyanobacteria for colour extraction, including Spirulina sp. for the extraction of Phycoerythrin, Haematococcus sp. for the extraction of astaxanthin pigments, and Dunaliella sp. for the extraction of beta-carotene pigments (Sharma et al., 2021).

Introduction In today’s environment, the greatest challenge for the food industry is to develop health promoting foods; it is determined by the raw materials used and its impact on consumer health. Furthermore, people lifestyle has changed greatly, resulting in a change in food eating patterns. In today’s world, people are moving towards eating foods that are nutrient base and tasty (Bonciu, 2018). of all the nutrient based products available in market, expanded snacks have become a popular snack all over the world because of its crunchy texture and low density making it consumer’s acceptance (Grasso, 2020). The basic idea for developing any expanded snacks is utilizing a starch-based material for a better crispy and crunchy product, but to make it more nutritious incorporation of protein and fibre rich raw materials is recommended (Gu et al., 2017). Along with the raw materials, the other important parameters for developing any extruded product is the particle of the flour, its physicochemical and rheological properties of the extrudates are much concentrated (Bouasla & Wójtowicz, 2021) Thereby, extruded snack is considering as functional food with major health benefits.

Introduction Noodles have received importance worldwide due to their particular taste, flavor, convenience, consumer acceptance, and low cost. The noodles generally come under the category of unhealthy and junk food because of high carbohydrate content and low vitamins, minerals, and fiber content (Park et al., 2011). Due to the increasing popularity of instant noodles, many people are becoming more prone to various health problems. The substitution of various ingredients to wheat flour noodles is increasing by incorporating different pulses, cereals, and pseudocereals to improve the nutritional properties and also make them health food. Among the pseudocereals, the use of amaranth and chia seeds in food products has been increasing because of their high nutritional value and good health benefits. Their proteins have well-balanced amino acids with a high content of essential amino acids and also good bioavailability (Lopez et al., 2019). These pseudocereals are also gaining importance due to their high content of phytochemicals and other macromolecules. The amaranth (Amaranthus sp) seeds are spherical and small, having approximately 1 mm diameter with a creamish to light reddish color. The composition of amaranth flour includes amylose (7.05%), proteins (15.27%), fat (7.33%), crude fiber (2.04%), and ash (2.93%) (Siwatch et al., 2019).

Introduction Aquaculture is one of the world’s fastest-growing food industries, providing a sustainable source of income for millions of people (Mohanty et al., 2018, Troell et al., 2014; FAO 2018). From the total world’s production around 33% of the all harvested fishes are not only utilized for human utilization for different reasons like size, species, quality, amount, non-accessibility of handling or transportation office. Today, waste generated from fish processing is a major source of pollution in the environment. Even when excellent grade fish is produced, only 50% of it is consumed by humans, with the remainder being discarded as waste. These wastes, which are dumped in an open environment without being treated, produces foul odour, which, as previously said, might be a reason of environmental pollution, water pollution and other municipal difficulties. Fish meal and oil made from low-grade fish and discarded fish parts not only solves many of these health and environmental issues, but also boosts the fishing and fish processing sectors’ overall revenue. With the rapid build-up in yearly extraction since 2000, global usage of natural resources has increased dramatically in recent years, reaching 92.1 billion tonnes and resulting in a 254% rise from 27 billion in the nineteenth century (Coppola et al., 2021). As a result, the research is stepping up its attempts to develop a circular bio-economy that aspires to increase the value of material flows while also achieving sustainable consumption and production. It is a new idea that is gaining traction for the goal of ensuring human quality of life through the effective and sustainable use of resources, energy, and infrastructure.

Introduction Sea food processing is one of the major contributors in food processing sector. The purpose of seafood processing is to prevent the wastage and prolong the shelf life of highly perishable commodity. It also increases the economy of the country through exports (Gopal et al., 2014). India produce 9.6 million MT of sea food during the every year and is one of the largest fish producers in the world. 23% of marine products are processed currently in India (Sathianandan, 2017). Pasteurized crab meat is one type of processed marine commodity exported from India. Globally, the pasteurized blue crab and swimming crabs are the major contributors to the economic wellbeing of the seafood industry. In India, pasteurized crab meat industries are significantly contributing to the export markets. Among the crab export, 70-80% is exported as pasteurized crab meat (Jebadurai17, 2014).