eChapters

Flavour, colour, inclusions, ripples, and variegates play important roles in creating distinctive ice cream products and enhancing consumer appeal. This chapter examines different flavouring materials and colouring systems used in ice cream, together with chocolate, cocoa, fruits, nuts, cookies, sauces, and other inclusions. It explains the formulation and processing considerations associated with ripples, ribbons, variegates, and complex flavour systems. Proper ingredient compatibility, dosage, distribution, and processing are essential for maintaining product quality. The chapter also addresses common flavour defects and their possible causes. Together, these topics provide practical guidance for developing attractive, innovative, stable, and commercially successful flavoured ice cream products.

1. Introduction

Movement of fluids from one location to another is an important unit operation in food processing. Various types of systems are used to convey fluids based on their flow behaviour. Understanding fluid flow behaviour is therefore important for designing of fluid flow systems. The fundamental mechanism involved in fluid flow is the momentum transfer occurring in moving fluids during various unit operations (fluid flow, aeration, drying, fluidization, filtration, centrifugation, sedimentation, mixing, etc.). This chapter deals with the basic concepts of fluid flow, viscosity, pressure measurement, conservation of mass and energy, boundary layer, momentum and velocity profile of fluid flowing in a pipe, flow metering devices, and pumps.

Introduction

Drying is one of the oldest methods of preserving food. Drying and dehydration both can be defined as the process of removing moisture from the foods. It is a simultaneous heat and mass transfer process, wherein heating medium or internal heat generation helps in evaporation of free water molecules from the product. Drying means removal of moisture of food upto a predetermined level where as in dehydration, complete removal of moisture upto bone dry weight of food material. Dehydrated foods have less than 2.5 % moisture content (dry basis) where as dried foods have dry basis moisture content more than 2.5 %. Drying operation consumes energy from 0.38 to 0.63 GJ/ton of food grain. Removal of water from foods using thermal energy thus makes it an energy intensive process. Modes of heat Transfer in various Driers are given in Table 1.Developments in dryer and methods, dryer selection based on form of raw material and typical residence time for various dryer are are given in Table 2,3 and 4, respectively.

Abstract

Foam Mat Drying (FMD) is an economical alternative to drum, spray and freeze-drying for the production of food powders. The raw material is converted into stable foam by adding foaming agent through beating or whipping in presence or not of foam stabilizers, and dehydrated by different classical airflow and thermal means. A high-quality food powder attributes can be obtained by the proper selection of foaming method, foaming agents, foam stabilizers, time taken for foaming, suitable drying method and temperature. FMD can be used for large production of food powders because of its suitability for all types of food materials, rapid drying at lower temperature, retention of nutritive value and bioactive compounds, good reconstitution characteristics and flowability and cost-effective for producing powders.

In this chapter, basics of foam and its structure, mechanisms of foaming, types of foaming agents and stabilizers for the production of stable foam have been discussed. The influence of foaming agents, foaming properties, thickness of foam and drying temperature on the drying characteristics of mat are also studied. This chapter analyzes the application of foam drying process for different food materials, the microstructure and whole quality attributes of obtained powder, and the energy consumption and costs of FMD as well.

Introduction

Since ancient times, addition of chemicals to food and food products has been done in order to to accomplish specific functions. Spices, smoke, vinegar, and alcohol were utilised to preserve foods more than 10,000 years ago. Usage of additives in food increased dramatically in the early 1900s, in tandem with advances in food chemistry and preservation. New, tasty, convenient, and healthy meals continue to be in high demand. As a result, by the early 1960s, over 2500 different types of additives were identified and utilized by developing countries in their diets. Basic foods are additive free, but as we increase the level of processing for conversion into an array of products, variety of additives are incorporated to increase the shelf life; to retain the nutritional value as well as to achieve higher standard of sensorial characteristics.

1. Introduction

Processed foods have become a way of life in the modern world. Manipulation of chemical and physical properties facilitated by modern food technology and followed by addition of food additives has created a plethora of innovative food products that offer consumers greater convenience, variety, safety, satiety and quality.
Food additives have been in use for centuries for preservation, for providing improved appearance or desired texture and flavour. Preservation of foods started with salting and smoking. The Egyptians used colours and flavours, Romans used saltpeter and in India, turmeric is being used. Similarly additives such as baking powder as a raising agent, thickeners for sauces and gravies and colours- synthetic as well as from natural sources are being used.
Today more than 2500 food additives have been in use mainly due to the spurt in the research activities in food science and technology that are aimed at providing different characteristic functions to foods. Out of these, about 1300 are the flavouring additives.

Importance of Food Additives

Food additives are chemicals, biochemical ingredients etc., which are added to food products for their technological benefits. These benefits may be to preserve the quality of food, to maintain and improve its appeal, to ensure its nutritional value and to provide innovations in new products with consumer appeal and satisfaction. Additives are also added to maintain uniform quality and to enhance quality parameters such as flavour, colour, texture etc. in large-scale production. They and their by-products ultimately become part of the food that is consumed and so they must be safe.

Additives may be direct additives, which are added deliberately to improve its sensory quality, nutritive value, stability, ease in processing and retention of quality during handling and retailing. There are also indirect additives, which are not added intentionally but get included into foods incidentally during handling, processing and packaging.

There are some guiding principles for the use of food additives. They should be justified for their technological effectiveness and purpose. They should be safe for use. There should be maximum adequate levels, absolutely necessary levels of usage and ADI (Acceptable Daily Intake) properly evaluated while considering its safety and permitted usage levels in foods. They should not be added with the intention of misleading consumers about quality. They should also not significantly affect adversely the nutritional quality of food products.

Introduction

Food additives are substances of natural or synthetic origin, which are added to foods to serve a certain technological or sensory function. They are utilized in the preparation and processing of almost all types of food in order to give favorable attributes to the food. Additives are the substances which are of little or no nutritive value but are added to food to enhance its flavour, appearance or other favourable quality. They are used in the processing or storage of foods especially in the developed countries includes antioxidants, food preservatives, colouring and flavouring agents etc. Food additives are substances added to food to preserve flavour or enhance its taste and appearance (Latiful Bari and Yeasmin 2018). Some additives have been used for centuries for example, preserving food by pickling with vinegar, salting, as with bacon, or using sulfur dioxide as in some wines. The use of food additives is not a modern-day invention; they have been used for centuries. The practice probably started when man first discovered that fire would cook and thereby preserve his meat. Later he realized that the addition of salt would preserve without cooking. Food preservation began when man first learned to safeguard food from one harvest to the next and by the salting and smoking of meat and fish. The Egyptians used colours and flavourings and the Romans used spices and colours for preservation and improving the appearance of foods. Thus, food additives have been used for centuries to enhance the variety of food products, to preserve, improve its taste and appearance, and provide a better mouth feel. Food additives afford us the convenience and enjoyment of a wide variety of appetizing, nutritious, fresh, and palatable food. Their quantities in food are small, yet their impact is great.

Food additive is any chemical substance that is added to food during preparation or storage. A food additive either becomes a part of the food or affects its characteristics for achieving a particular effect. For instance, substances that are used to enhance the appearance, texture, or to keep qualities of a food are considered food additives.

Food adulteration means anything adding or subtracting with food making it injurious to health. This adulteration may be done intentionally or unintentionally. Intentional adulteration is a criminal act and punishable offense. Or the process of lowering the nutritive value of food either by removing a vital component or by adding substances of inferior quality. Food Safety and Standards Act of India (FSSA) defined “adulterant” as any material which is or could be employed for making the food unsafe or sub-standard or mis-branded or containing extraneous matter”. According to Federal Food, Drug and Cosmetic Act (FFDCA), the primary food safety law administered by the Food and Drug Administration (FDA), food can be declared adulterated if:

1. a substance is added which is injurious to health
2. cheaper or inferior quality item added to food
3. any valuable constituent is extracted from main food article
4. quality of food is below the standards
5. any substance has been added to increase bulk or weight
6. to make it appear more valuable

Introduction

In the ancient era, adulteration was practiced as economical fraud like the addition of water to milk and stone to grains and pulses but nowadays it has become a global concern due to adverse health effects of adulterants on a human being. Words like substitution and admixture can help define adulteration. In general, adulteration is defined as either removal of valuable constituents from food or intentionally/ unintentionally addition of substandard quality material to degrade food quality. Food adulteration not only negatively affects the quality of food products but also results in numerous adverse health effects along with significant economic problems (Cheng et al., 2015).

Abstract

We are very fortunate to be born in a nation which is blessed with awesome decent variety of natural products, fruits, vegetables, cereals, pulses and so forth. The population of India expanded consistentlythat cause a genuine sustenance and shelter problem. The supply of food is not adequate to fulfill the demand of the consumers. This shortage of food is the root for adulteration of foodstuffs by the traders. Food adulteration is a procedure in which the nature of sustenance is brought down either by the addition of inferior quality material or by extraction of valuable ingredient. An adulterant is a chemical substance which should not be contained within other substances (food, beverages) for legal or other reasons. The addition of adulterants is called adulteration. Food is adulterated to increase the quantity and make more profit. The food is sucked of its nutrients and the place where the food is grown is often contaminated. For instance: milkis mixed with water. Vanaspati is utilized as an adulterant for ghee. Adulteration of food is unsafe as it may be toxic and causes serious health hazards to the consumer. To evade this issue government has passed an act which is known as preservation of Food Adulteration Act. It covers security from risks involved due to contamination of poisonous elements. Instead of government efforts the informed and aware consumers will have the capacity to dispense with this issue. So, here in the chapter adulterants their types, effect on human health, laws and control measurement were reviewed and discussed.

INTRODUCTION

Adulteration of food consists of substituting it wholly or in part by any cheaper or inferior substance or of removing any of its constituents, wholly or in part, which affects adversely the nature, substance or quality of the food. According to the Indian Prevention of Food Adulteration Act (PFA) 1954, any ingredient which, when present in food, is injurious to health is an adulterant. Thus, according to the PFA definition, many of the food contaminants discussed in the previous section are adulterants and come under the purview of food adulteration.

Adulteration of foods was practised even in ancient times. It was not a serious problem then because business was on a small scale and the transactions involved a large measure of personal accountability. Later, with the increased centralization of food processing and distribution, and corresponding decline in personal accountability, intentional adulteration of food increased. Even in the early nineteenth century, many adulterants were used in articles like pepper, essential oils, vinegar, beverages (coffee, tea, beer, wines), butter, bread, etc. In recent years adulteration of foods has become a serious problem the world over. In western countries there is a rising concern over the safety of the food supply and many remedial actions, both voluntary and enforced, have been taken.

1. Guidelines on Analytical Terminology

    1.    Accuracy : The closeness of agreement between a test result or measurement result and a reference value.

    2.    Analyte : The chemical substance sought or determined in a sample. This definition does not apply to molecular biological analytical methods.

    3.    Applicability : The analytes, matrices, and concentrations for which a method of analysis may be used satisfactorily.

    4.    Bias : The difference between the expectation of the test result or measurement result and the true value. In practice conventional quantity value can be substituted for true value.

    5.    The bias of a measuring instrument is normally estimated by averaging the error of indication over the appropriate number of repeated measurements. The error of indication is the: “indication of a measuring instrument minus a true value of the corresponding input quantity”.

    6.    Calibration : Operation that, under specified conditions, in a first step, establishes a relation between the values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and in a second step uses this information to establish a relation for obtaining a measurement result from an indication.

    7.    Certified reference material (CRM) : Reference material accompanied by documentation issued by an authoritative body and providing one or more specified property values with associated uncertainties and traceability, using valid procedures.

Food and Industrial Microbiology

    1.    Microbiology often has been defined as the study of organisms and agents too small to be seen clearly by the unaided eye—that is, the study of microorganisms

    2.    Two bacteria that are visible without a microscope, Thiomargarita and Epulopiscium.

    3.    Procaryotic cells [Greek pro, before, and karyon, nut or kernel; organism with a primordial nucleus] have a much simpler morphology than eucaryotic cells and lack a true membrane-delimited nucleus. All bacteria are procaryotic.

    4.    Eukaryotic cells [Greek eu, true, and karyon, nut or kernel] have a membrane- enclosed nucleus; they are more complex morphologically and are usually larger than procaryotes. Algae, fungi, protozoa, higher plants, and animals are eucaryotic.

    5.    The ordinary microscope is called a bright-field microscope because it forms a dark image against a brighter background

    1.    Laminar flow hood works on the principle of 
        a)    High-efficiency particulate air filter
        b)    High-energy particulate air filter
        c)     High-efficiency pressure air filter
        d)     None
    2.    Most of the organisms are killed
        a)    121°C for 5 min.    b)    15lb/in²
        c)     a & b    d)     None
    3.    Autoclaving is not recommended for
        a)    Oils    b)    Powders
        c)     Sensitive fluids    d)     All

Introduction

India is one among the progressive countries in the world in maintaining food and nutrition database efficiently. The country has been in the fore front in signing the resolution on ‘Transforming the World: the agenda for Sustainable Development-2030’. India outstood among the developing countries in food self-sufficiency since seventies with low household hunger rates and low infant mortality rate. In the meanwhile, the country faced double burden of food and nutrition with inadequate dietary intake and under nutrition in one hand and overweight due to low physical activities on the other hand. Rapid increase in population with diminishing food production led to food insufficiency and malnutrition whereas, rapid economic growth and increasing mechanization led to the increasing prevalence of overweight and obesity. Both the under- and over nutrition are associated with health hazards, hence, use of normal body mass index (BMI)would be considered as an indicator for food security (FAO, 2013)

1. INTRODUCTION

It is hard to conceive which came first on earth, human being or food. If the human was born first, he or she needed food immediately to survive. Thereafter, the human beings continued to need food and continued to eat food throughout his or her life. Hence, the relationship between human being and food is permanent and the requirement of food for the human being to be alive is everlasting. Further, sources of food may survive in nature without human intervention but human being can not remain alive without food. This clearly signifies the permanent bondage of human being and food which is inseparable under any circumstances. ‘Thus, should we state that every human being necessarily needs food and should have right to food as soon as born.

In order to further strengthen this view, the governance which rules human beings should also be protective and enact laws to ensure food to each human being born in respective countries.

2. BACKGROUND

•   “Hunger is exclusion”, wrote de Castro (1963) a Brazilian anti-hunger advocate. “Exclusion from the land, from jobs, wages, income, life and citizenship. When a person gets to the point of not having anything to eat, it is because all the rest has been denied. This is a modern form of exile. It is death in life”.

•   Simply by being born, everyone has the right to food. A person doesn’t have to do anything to “deserve” it; the right to food is a birthright. But this does not entitle a person to sit back and ask for free food. People are responsible for doing all they can to realize their own right to food. Governments that are parties to the International Covenant on Economic, Social and Cultural Rights are responsible for ensuring that all those living within their borders have the means to do so, (FAO, 2007).

•   Broadly speaking, governments should create peaceful, stable, free and prosperous environments in which people can feed themselves in dignity. Even without a legal obligation to do so, countries have a moral obligation to ensure freedom from hunger (FAO, 2007).

Introduction

Fish symbolizes as prosperity and fertility of the region rather than for its food and nutritional security in many parts of the world. The abundant inland waters resources such as reservoirs, rivers and wetlands contribute to meet the food and nutritional security of a nation. The rich diversity of freshwater fish fauna supplements as a quality animal source protein, macro and micro nutrients for the health benefits of all age group of human population. Hence, the fishery activities such as fish catch and production enhancement from inland water resources are emphasized to scale up to meet the growing demand. The world fish production through inland capture fisheries has increased from 10.5 million tons in 2009 to 11.9 tons in 2014. The utilization of the existing vast inland resources through technical interventions would impact on food and nutritional security and livelihood of the fishers and rural masses of the developing countries.

Ice cream is not only an indulgent frozen dessert but also a food containing several nutrients derived from milk, cream, sugars, and other ingredients. This chapter examines ice cream from a nutritional and food-science perspective, focusing on its major nutritional components and energy contribution. It discusses milk fat, proteins, lactose, carbohydrates, minerals, vitamins, and the nutritional effects of formulation. The chapter also considers energy value, portion size, digestibility, and palatability. Understanding these factors helps explain why ice cream provides both nutritional and sensory value. The discussion provides a balanced foundation for evaluating ice cream as part of varied diets and developing products for different consumer requirements.