eChapters

Population growth and rising demand for processed food have increased pressure on food industries to improve safety while reducing energy, water, waste and environmental impacts. Green preservation technologies seek to deliver effective processing through cleaner operations, responsible resource use and reduced dependence on toxic substances. These approaches support sustainable industrial development by lowering processing time, conserving nutrients and improving the utilisation of raw materials. The chapter discusses energy-efficient preservation, water-saving techniques, waste valorisation and the conversion of by-products into useful materials. Life-cycle assessment is introduced as a method for evaluating environmental performance across the preservation system and identifying opportunities to reduce emissions, resource consumption and food-chain waste.

Micronutrient deficiency

Micronutrient deficiencies are the cause for widespread health problems, especially in developing countries. The deficiencies in vitamin A, iron, and iodine have been identified as the greatest concern, as they affect over one third of the world’s population (WHO, 1995). In addition, these micronutrients interact with each other, i.e., synergistic effects between iodine deficiency disorder (IDD) and iron deficiency anemia (IDA), or between vitamin A deficiency (VAD) and IDA to deepen their negative impacts (Lonnerdal, 2004; Lynch, 1997; Zimmermann et al., 2004). Deficiencies typically coexist in children in developing countries (Zimmermann et al., 2000).

70% of people in India do not consume enough micronutrients such as vitamins and minerals. About 70% of pre-school children suffer from anaemia caused by iron deficiency and 57% of preschool children have sub–clinical Vitamin A deficiency. Neural Tube Defects (NTDs) are the most common congenital malformation with an incidence that varies between 0.5-8/1000 births. It is estimated that 50-70% of these birth defects are preventable. One of the major causes is deficiency of folic acid. Thus, micronutrient deficiency also known as “hidden hunger”, is a serious health risk. Unfortunately, those who are economically disadvantaged do not have access to safe and nutritious food. Others either do not consume a balanced diet or lack variety in the diet because of which they do not get adequate micronutrients. Often, there is considerable loss of nutrients during the processing of food.

1. INTRODUCTION

Food processing involves the use of wide range of unit operations and technologies to transform the raw, bulky and perishable food into more shelf-stable, palatable and marketable food products. Food processing is one of the most effective solution to reduce the wastages, improves the quality and safety aspects of food products, increase the food availability and marketability. Fruits and vegetables are considered as an integral part of any dietary system as these are rich sources of vitamins, minerals and dietary fibres. India is the second largest producer of fruits and vegetables after Brazil and China which contributes 10 % of world fruit production and 14 % of world vegetable production. Fruits and vegetables are more prone to spoilage as compared to cereals due to their nature and composition. The spoilage can be occurr at the time of harvesting, handling transportation, storage, marketing and processing that results in lot of wastage in the form of seeds, pulps, peels etc. Efficient management of these wastes can help in preserving vital nutrients of fruits and vegetables, and bringing down the cost of production of processed foods, besides minimizing pollution hazards. In India, processing of fruits and vegetables is extremely low as compared to the developed countries.

Biotechnology can help in the bio-processing of fruits and vegetables for the production of novel products having better sensory and nutritional qualities, improved shelf life. Bio-processes involve the use of different micro-organisms and enzymes along with modern biotechnological techniques like genetic engineering.

Fisheries comprise a major economic activity within complex interactions between human beings and water - ‘the first among equals’ of the natural resources (Ahmed, 1992). Fisheries data assembled by the Food and Agriculture Organization (FAO) suggest that global marine fisheries catches increased to 86 million tonnes in 1996, then slightly declined. In the past three decades, employment in fisheries and aquaculture has grown at a higher rate than the growth of world population. The fishery engineering is evolving as an important domain in view of depleting stocks on both pre and post-harvest scenarios. It will also aid in fish processing technologies, optimizing energy and water use in seafood industries, mitigating climate change related issues and reducing carbon foot print. It is important to explore novel ways to obtain, quantify, and integrate industry responses to declining fishing stocks and increasing management regulations into fishery - and ecosystem-based management advice. The technological interventions help to reduce the wastage of fishes, which is otherwise a highly perishable commodity by preservation technologies and converting it into value added products with higher shelf life. Use of appropriate technologies along the fish value chain will help in producing better quality products and fetch more markets and higher price.

Major areas of technological interventions in the field of fishery engineering cover design and development of fish processing equipment and machineries, energy efficient and eco-friendly solar fish dryers, fuel efficient fishing vessels and fiberglass canoes, indigenous electronic instruments for application in harvest and post-harvest technology of fish, quality improvement of Indian fishing fleet and energy and water optimization techniques for fish processing industries. Focused areas include development of cost effective solar dryers with LPG, biomass, Infra-Red or electrical back-up heating systems, fish de-scaling machines, Fish freshness sensor etc.

R - Enamel can: The acid resistant, gold coloured enamel treated can are called R enamel cans. It is used for canning of acidic food which have soluble colouring pigments.

R factor: It is a group of genes present in some bacteria that provide a basis for resistance to antibiotics and can be transferred from cell to cell by conjugation.

R value: R value is a measure of resistance to the flow of heat through a given thickness of a material (insulation) with higher numbers indicating better insulating properties.

Rabbitto and putridity: The surface taint of the milk caused by Pseudomonas putrefaciens is called rabbitto and putridity.

Racking: An important operation for the wine production which wine is siphoned off or bottom of the vat) and is transferred to a fresh vat with the help of a false bottom. Racking is repeated decanting to remove the slowly setting cloud of the freshly fermented young wine. It is also called clarification. It is synonym to siphoning.

Rad: It is the unit of radiation dose being equivalent to the absorption of 100 erg/g of irradiated material.

The fruits and vegetables are highly perishable in nature. The losses in harvested fruits and vegetables start immediately after harvesting and the resulting spoilage caused by biochemical changes (enzymatic) and activity of microorganisms such as bacteria, moulds and yeast. The losses caused by the microorganism in fruits and vegetables products can be prevented by controlling or destroying these organisms in order to preserve fruits and vegetables by processing and preservation means. The processing and preservation is one of the most important activities among various types of activities of Horticultural Science.

Processing: The processing can be defined as an activity, which is performed to maintain or improve the quality or to change the form or characteristics of the product. Processing operations are undertaken to add value to horticultural produce after their production. The main purpose of processing is to minimize the qualitative and quantitative deterioration of produce after harvest.

Preservation: Preservation can be defined as the science which deals with the methods of prevention of decay or spoilage of produce and allow it to be stored in a fit condition for future use.

Fruits and vegetables can be preserved for short and long term. For short term preservation can be achieved by proper handling of produce and low temperature storage. Long term preservation can be achieved by canning, drying and dehydration, fermentation and by using chemical preservatives.

Introduction
Many chemical substances are added to the food for functional purposes and in many cases, these are found to occur naturally in some foods. When these substances are added to the foods, they are known as food additives. An additive is defined as a substance or mixture of substances other than basic food ingredients that are present in a food as a result of any aspect of production, processing or packaging. Additives may be intentional as well as unintentional. Intentional additives are substances deliberately added to perform a specific function and to increase the shelf life of the products while unintentional additives have no intended function in the finished product but become part of that particular product. The food additives having significance in fruit and vegetable preservation and their mode of action are discussed as under:
Objectives of adding an additive
1. To reduce wastage and improve keeping quality e.g., the addition of potassium meta-bisulphite in squashes, benzoate in sauces, sodium propionate in bread and sorbic acids in cheese etc.,
2. To improve and maintain nutritive elements e.g., addition of vitamins for enrichment, addition of vitamin D to milk, addition of iodine to salt etc.
3. To enhance the quality and consumer acceptability of the product e.g., the addition of colouring agents, emulsifiers, thickeners etc.
4. To facilitate the preparation of foods e.g., the addition of acid to beverages, sugar in jams, jellies etc.

Agro processing involves a diverse range of unit operations aimed at converting raw agricultural products into value-added goods. These processes serve to enhance the shelf life, quality, and overall appeal of agricultural commodities while also boosting their nutritional content and market value. The unit operations employed in Agro processing are determined by the specific characteristics of the product and the desired outcome. Common steps include cleaning, sorting, peeling, grinding, and milling. Preservation methods such as blanching, fermentation, drying, and freezing play a crucial role in preparing products for consumption or further manufacturing. Furthermore, operations like extrusion, canning, juicing, and packaging are essential for producing a variety of processed food items, while proper storage and warehousing ensure the long-term availability and sustainability of these goods. Each unit operation is designed to contribute toward creating high-quality, market-ready products, minimizing waste, and ensuring optimal utilization of raw materials. By combining these processes effectively, Agro processing maximizes the potential of agricultural resources and strengthens the overall food industry.
OVERVIEW OF MATERIAL HANDLING
Materials handling encompasses a broad spectrum of activities, including mechanical harvesting on farms, transportation of live animals, refrigerated transport of perishable goods, and pneumatic conveying of flour from rail cargo to bakery storage facilities. It is important to minimize product losses during these operations while maintaining the quality of raw materials, such as preserving vitamin content and physical appearance, ensuring sanitary conditions, reducing bacterial growth, and optimizing the timing of transfers to avoid delays that could compromise both the economy and product quality. The journey of agricultural produce from farms to processing areas often results in significant transformations. For instance, grapes are transported via tractors, trucks, or trailers to juice plants or wineries, where they are graded, washed, and processed further. However, there are limitations on the size of transport vehicles and the duration fruits and vegetables can be held. Since these are living, respiring products, prolonged storage can increase batch temperatures to levels that encourage spoilage.

Food processing is a fundamental component of the food industry that transforms raw materials of plant and animal origin into safe, nutritious, convenient and value-added products. This chapter introduces the basic concepts and evolution of food processing, tracing its development from traditional practices to modern technologies driven by consumer demand. It explains the major purposes of processing, including shelf-life extension, food variety, safety and preservation of nutritive value. The chapter also examines primary, secondary and tertiary processing and discusses the effects of processing on macronutrients and micronutrients. Understanding these fundamentals provides a foundation for evaluating conventional and emerging food-processing technologies.

Supercritical Fluid Extraction (SFE) is an advanced extraction technology that provides an efficient and comparatively sustainable alternative to conventional solvent-based extraction. This chapter introduces the fundamental principles of supercritical fluids and explains the mechanism by which desirable compounds can be selectively extracted from food materials. It examines the use of SFE for recovering aroma compounds, essential oils, flavours, pigments, colours, antimicrobial compounds and valuable bioactive substances. Particular emphasis is placed on obtaining high-purity extracts while minimizing toxic solvent residues. The chapter also discusses industrial food applications, process advantages and limitations, highlighting the potential of SFE for developing cleaner, efficient and value-oriented food-processing and ingredient-recovery systems.

Onion is an economically significant bulb crop cultivated across diverse agroecological environments. Its cultivars vary considerably in bulb size, shape, colour, pungency, maturity, storage behaviour and photoperiod response. Understanding its vegetative and reproductive morphology, growth habit, physiology and taxonomic relationships is fundamental to crop improvement and germplasm conservation. This chapter examines the botanical features and taxonomic position of onion within the genus Allium. It explains relationships among cultivated types, landraces and allied species and discusses varietal classification according to climatic adaptation and consumer preference. Classical characterization and molecular taxonomy are considered important tools for developing productive, resilient and market-preferred onion cultivars.

Conventional fertilizers often exhibit low nutrient-use efficiency, resulting in nutrient losses, soil degradation, water contamination and unnecessary production costs. Nano-fertilizers offer controlled and targeted nutrient delivery through formulations engineered at the nanoscale. Their high surface-area-to-volume ratio can improve nutrient availability, plant uptake, growth, bulb quality and storage performance while reducing conventional fertilizer requirements. This chapter explains the nature, modes of action and potential benefits of nano-fertilizers in onion production. It also considers nano-biofertilizers, smart nutrient-delivery systems and nano-sensors. Particular attention is given to manufacturing cost, nanotoxicity, effects on soil microorganisms, farmer accessibility and the need for standardized safety and regulatory frameworks.

Precision farming manages spatial and temporal variability within fields through targeted, data-driven interventions. Onion is particularly suited to precision management because its productivity and quality are sensitive to moisture, nutrients, environmental stress, pests and diseases. This chapter describes applications of GIS, GPS, variable-rate technology, IoT, cloud platforms, drones, remote sensing, multispectral imaging, smart sensors, artificial intelligence, automated systems and crop-response models. These technologies support soil assessment, field preparation, irrigation, fertilization, crop monitoring, stress detection, protection, yield estimation, harvesting and storage. Their potential to reduce input waste and improve profitability is considered alongside constraints involving investment costs, technical knowledge, connectivity, accessibility and data privacy.

Ginger is used extensively as a spice in cuisines throughout the world. Ginger belongs to Zingiberaceae family and an English botanist William Roscoe (1753-1831) gave this plant the name Zingiber officinale in the year 1807. The name of the genus Zingiber derives from a Sanskrit word denoting “horn shaped” in reference to the protusions on the rhizomes (Ghosh et al., 2011). It is an oldest rhizome widely domesticated as a spice where the edible part is the swollen underground stem or rhizome. The Zingiberaceous plants have strong aromatic and medicinal properties and are characterized by their tuberous or non-tuberous rhizomes (Chen et al., 2008). Ginger is a medicinal plant that has been widely used all over the world, since antiquity, for a wide array of unrelated ailments including arthritis, cramps, rheumatism, sprains, sore throats, muscular aches, pains, constipation, vomiting, hypertension, indigestion, dementia, fever and infectious diseases (Ali et al., 2008). Ginger has direct anti-microbial activity and thus can be used in treatment of bacterial infections (Tan and Vanitha, 2004).

Low-temperature preservation is one of the most widely used physical approaches for extending food shelf life without seriously affecting quality. Reducing storage temperature slows microbial multiplication, enzyme activity and chemical deterioration, with inhibition increasing as temperature declines. Refrigeration maintains food above its freezing point, while freezing reduces temperature below zero and converts available water into ice. The chapter examines conventional refrigeration, advanced chilling, freezing, cryopreservation, superchilling and the influence of ice crystallisation on food quality. It explains how temperature, cooling rate and crystal size affect texture, nutritional retention and storage stability, while also addressing the limitations and quality changes associated with prolonged low-temperature storage.

Thermal preservation is among the most established methods for improving the safety and storage life of food. It uses controlled heating to destroy spoilage organisms and pathogens and to inactivate undesirable enzymes. Processing intensity varies according to the target microorganisms, food composition, packaging and required shelf life. Pasteurisation reduces pathogenic and spoilage microorganisms without achieving complete sterility, while sterilisation destroys more heat-resistant organisms and spores to produce commercially stable foods. Ultra-high-temperature processing combines very high temperatures with extremely short treatment periods. This chapter also discusses retort processing, thermal-death kinetics and microbial-inactivation models used to design safe processes while minimising nutritional and sensory damage.

Galactan: It is a polysaccharide in which major monosaccharide subunit is galactose and often found among the pectic substances of cell walls.

Galactoblast: It is also called colostrums. It is female’s first milk after parturition.

Galactometer: It is an instrument used for recording the specific gravity of the milk.

Galactorrhea: A spontaneous flow of milk from the nipple is called galactorrhea.

Galactosamine: An amino derivative C6

Galactose: It is a reducing sugar and is monosaccharide. It is an aldohexose sugar obtained by hydrolysis of lactose.

Galactosidase: An enzyme (actase) that hydrolyzes a galactoside.

Galactoside: A glycoside that yields galactose on hydrolysis.

Galactosyl: A glycosyl radical C6 H11 O5 that is derived from galactose.

Galacturonic Acid: A crystalline aldehyde acid C6 H10 O7 that occurs in polymerized form in pectin.

Fishery resources get depleted due to over fishing and one of the important management measure is to assess the fish stock, get update on the status of fishing and devise measures to mitigate fishery resource depletion. Recent examples of such management regulations in Indian fisheries are implementation of minimum legal size for fish catch, regulations brought out to control length and size of fishing fleet etc. With multi-dimensional expansion of fishing activities in India, it is necessary to analyse stock data critically bringing out suitable recommendations for fishery management. Stock assessment models play a vital role in management of fisheries.

Fish stock assessment is an evaluation of the state of the stock as relating to changes in the abundance or composition of the stock to changes in the amount of fishing. It involves the use of theories, laws, models and methods propagated by various scientists. There are two general approaches - population model (Schaefer, 1954, 1957) in which the stock is treated as a single entity subject to simple laws of population growth and the analytic approach (Ricker, 1958, 1975) which considers the abundance of the population as determined by the net effect of the growth, reproduction and mortality of individual members of the stock.

Stock assessment gives us the maximum sustainable yield (MSY), fish mortality, the input and output into the fisheries. The various environmental changes as they affect biological and physical features of a fish species, family or the group need to be assessed by using a model for its stock assessment and the basic data is got from research and commercial surveys.

Research survey is a detailed investigation of the fish based on the objectives. It involves taking the data on biological parameters of the fish (length, weight, sex etc), the food of the fish including the percentage composition. Other factors include the environmental features such as time, weather, position of catch, physicochemical parameters of the water body. Commercial survey involves taking note of basic and important information of commercial usefulness e.g length-weight frequencies, percentage composition etc which are strictly for economic purpose.

Fruits represent a vital component of global agriculture, serving as not only a significant source of essential nutrients but also a lucrative sector of the economy. However, from the moment of their inception on the tree to their arrival on consumers’ tables, fruits undergo a complex journey influenced by a myriad of factors. Among these, pre-harvest practices wield a profound impact on fruit quality, enzymatic activities, texture, ripening, and ultimately, post-harvest transportation losses. Each pre-harvest practice, from mineral nutrition to harvesting methods, plays a distinct role in shaping the biochemical composition and physical attributes of fruits, ultimately affecting their marketability and shelf life. Mineral nutrition stands as one of the foundational pillars of fruit production, with essential minerals serving as building blocks for various biochemical processes. Irrigation practices represent another critical aspect of pre-harvest management, as water availability profoundly impacts fruit development and composition. Different irrigation regimes can influence enzymatic activities, fruit texture, and the timing of ripening, necessitating strategic water management to achieve desired fruit quality while minimizing post-harvest losses. Canopy regulation, achieved through training and pruning techniques, offers growers a means to manipulate light penetration and airflow within the orchard. Moreover, the application of plant growth regulators (PGRs) emerges as a tool for fine-tuning fruit development and ripening processes. By modulating hormonal signals, PGRs can alter enzymatic activities, influence fruit texture, and mitigate transportation losses. However, judicious application is paramount to avoid adverse effects on fruit quality and safety. Harvesting decisions, including the determination of optimal maturity and the timing and method of harvest, profoundly impact fruit quality and post-harvest losses.

HACCP: The Hazard Analysis and Critical Control Points (HACCP) is a scientific, rational and systematic approach to identify, assess and control hazards during production, processing, manufacturing and use of food. It ensures safety of the food. HACCP presents a good opportunity for the food industry for upgrading quality and bringing uniformity and consistency in their supplies to international market, or It is a systematic preventive approach to food safety that addresses physical, chemical and biological hazards as a mean of prevention rather than finished product inspection. It involves identification, evaluation and control of hazards which are significant for food safety.

HACCP plan: A document prepared in accordance with the principles of HACCP to ensure control of hazards which are significant for food safety throughout the food chain under consideration.

Haemagglutinins: A group of proteins of plants that are not antibodies and do not originate in an immune system but bind specifically to carbohydrate containing receptors on cell surfaces (red blood cells). It is also known as Phytoagglutins/lectins.

Haff disease: A pyrolysis due to the excessive consumption of various fresh water fish which contain the vitamin antithiamine.