eChapters

Sexual Propagation in Pineapple

Pineapple occupy a gametophytic self-incompatibility system so that commercial cultivated pineapple rarely produces very few seeds in the field (Coppens d’Eeckenbrugge et al. 1992). However, if two varieties are grown close together and flowering time is same, it is chance for insect-aided crosspollination to set seeds. The vectors for natural cross-pollination vary with the location. Where humming birds are present, they are likely to be a primary pollinator. Where these birds are absent, honeybees and ants would be the main pollinators. The small corolla tube and the fact that pollen is not shed rule out wind as a pollinator. Since seedy fruit is not acceptable for either fresh or processing, it is rare to find more than one cultivar on large plantations. If more than one cultivaris grown in a farm, spatial separation and careful management of time of forcing will prevent seed production. However, cross-pollination between cultivars is used by pineapple breeders to generate new hybrids like “MD-2” and “CO-2” (Williams and Fleisch 1993). Sexual propagation is important for the generation of new varieties and is successfully used in pineapple breeding programs (Reinhardt et al., 2018). Pineapple Seeds are placed in shallow trays on moistened sand beds under controlled environmental conditions for germination(Junghans et al., 2015).Seed germination come up mostly from two weeks after sowing and rates are high, usually 80% or more (Chang et al., 2003). The new growing seedlings have 6 to 8 leaves stage within about three months after sowing and are then transplanted to pots with agricultural substrate and are grown under greenhouse or screen house conditions. After an additional 9 to 15 months of growth stage, during which the seedlings height reach 25 cm, which is considered adequate for planting in the field, the plants are finally acclimatized in an open nursery.

Post-Harvest Losses

A post-harvest loss is defined as the measurable qualitative and quantitative food (including fruits and vegetables) loss along the supply chain, starting at the time of harvest till its consumption or other end uses (Hodges et al., 2011). Pineapple fruits are highly perishable in nature and continuously respired even after harvesting which limited its shelf-life leading to the storage problems (Hossain and Bepary, 2015) and decline in production due to post-harvest losses (Babalola et al., 2008). During the storage for distant marketing, pineapple fruits easily losses its moisture content through transpiration and become more susceptibility to microbial spoilage (Hossain and Bepary, 2015). In India the top five leading pineapple producing states are West Bengal, Assam, Karnataka, Meghalaya and Manipur (Anonymous, 2018). The measurable qualitative and quantitative losses of pineapple at post-harvest level are from the various stages of handling from the farm level up to the consumers (Table 1 and 2).

Introduction

Fruits and vegetables are essential constituents of daily diet and are highly demanded in the recent years from most of the population. They are reservoir of vitamins, essential minerals, antioxidants, bio-flavonoids, dietary fibres and f lavour compounds which fall easily victim to abiotic and biotic adversities. Fruits and vegetables are highly perishable and during the post- harvest, there are considerable losses due to microbes, insects, respiration and transpiration.

The important quality factors of fresh produce contributing to the marketability are texture, colour, appearance, flavour, nutritional value and microbial safety. These quality factors are measured by plant variety, ripening stage, maturity stage pre-harvest and post-harvest conditions. The Post-harvest losses of fruits and vegetables are a serious problem because it rapidly deteriorates them during handling, transport and storage. Edible coating over fruits and vegetables are used to improve their quality and shelf life.

Pineapple (Ananas comosus) is an edible fruit bearing plant native to South America belonging to family Bromeliaceae. Pineapple is grown over an area of 1.06 million hectares with an annual production of 29.36 million metric tonnes (FAO, 2022). Pineapples are rich in vitamin C, minerals, fiber and low in calories. The enzyme bromelain present in pineapple is of considerable importance to the pharmaceutical and cosmetic industry (Varilla et al., 2021). The market for pineapples has been expanding significantly because of its appealing aroma compounds and nutritional benefits. The climate and distribution of rainfall in tropical and sub-tropical regions make these areas ideal for pineapple cultivation. Worldwide, Brazil is the leading producer of Pineapple followed by Philippines, Thailand, Costa Rica and India (FAO, 2022). In India the leading pineapple producing states are West Bengal, Northeastern region, Bihar, Kerala, Karnataka, Goa, and Maharashtra.This ‘Kew’ of Cayenne group and ‘Mauritius’ of the rough leaf Queen group are the two varieties dominating in India (Devi et al., 2013; Joy and Sindhu, 2012).

Botanically, Pineapple is a herbaceous perennial having short stem and tough waxy leaves. It produces a fleshy, edible, yellow fleshed which is a fusion of 100-200 berry like fruitlets. Most of the members of Bromeliaceae family are epiphytes i.e. grown on rocks and living trees though pineapples grow on the soil bearing sensitive adventitious root that cannot regenerate once damage and intolerant to poor soil aeration. The cultivated varieties of pineapple can be categorized into three groups namely, Cayenne, Queen, and Spanish. The Spanish and Cayenne groups can be cultivated for dual purposes viz. fresh fruit and canning. However, the Queen group are only cultivated for fresh fruit markets due to the presence of deep eyes making it unsuitable for canning (Devi et al., 2013).

Abstract

The use of biosensors is growing in the food industry as a means to ensure food safety and quality because of its versatility in determining biological compounds. It is defined as analytical technique used for detection of analyte that combines a biological component with a physico-chemical detector. The most important contribution of biosensors in the food sectors is to control production processes and ensure food quality and safety by reliable, fast and cost effective procedures. Biosensors have been useful for the evaluation of food composition, particularly in functional food products fortified with phytochemicals, vitamins and minerals.. Biosensors are replacing conventional analytical tools since they offer advantages in size, cost, specificity, rapid response, precision and sensitivity. Future progress in the biosensor technology involves the development of nutraceutical release technology within packaging material where it can be used to trigger the controllable release of bioactive components and targeted delivery of protective agents into the food product. The growing consumer demands for safe and quality food has led the food industries to search for quick and reliable methods for which the applications of the biosensor technique in the field of food processing and quality control are found to be promising.

Strategic partnerships and productive outreach play a crucial role for new technologies to successfully reach the market, drive growth, and strengthen a country’s global competitiveness, Outreach programs have various benefits, ranging from technology transfer awareness, communication of stakeholders, industry, government, to academy partnership promotions. These efforts help in establishing connections, communicating opportunities, and encouraging active engagement from key stakeholders. Outreach activities can be performed under two broad categories:
1. Written communication includes all communication which can be viewed, shared, or made accessible for a set of people in a passive manner. This includes reports, newsletters, guidance, and online content which provide insights of worth for stakeholders.
2. Human outreach includes all direct communication like c face-to-face or verbal form communication it included conferences, conventions, workshops, seminars and personal communication with industry leaders.
The type of outreach creates stronger, more personal connections. An effective outreach strategy usually combines both human and written outreach efforts. By following this strategy TTOs can expand and strengthen partnerships, and make it easier for research-led innovations to get transition from lab to market more effectively. This chapter explores key outreach models, strategic networking approaches, and proven practices for building impactful partnerships in technology transfer.

8.1 Key legal statutes and regulatory foundations
Various policy measures were also undertaken by the Government of India in due course of time. The Government of India enacted four science policies after gaining independence, i.e. Scientific Policy Resolution (1958), Technology Policy Statement (1983), Science and Technology Policy (2003) and Science Technology and Innovation Policy (2013). The 1983 Technology Policy Statement possessed a simple goal of creating indigenous technology and boosting efficient absorption and adaptation of imported technologies suited to the nation’s priorities and. The Technology Policy Statement of 1983 was followed up through the establishment of the Technology Information Forecasting and Assessment Council (TIFAC), an autonomous organization entirely owned by the Government of India under the Department of Science and Technology during 1988. TIFAC also offers some funding and supports development and commercialization of technologies through the home-grown technology scheme, among its other operations. The Technology Development Board Act (1995) was also a significant policy move of the government in the same direction. Also in recent times, the Government of India also unveiled its own National IPR Policy 2016 with the motto cum slogan “Creative India, Innovative India”. In addition, the policy is aligned to a number of other schemes of the Indian Government like “Make in India”, “Atal Innovation Mission”, “Start-Up India” and “Stand-Up India”, all aimed at encouraging creativity, innovation and entrepreneurship in the nation.

Introduction

Color is an important characteristic of food. Based on the color of the food, f irst impressions are made: Is the fruit immature, ripe, or overripe? Is the toast burnt? Is the food fresh? Based on these first impressions, a judgment is made whether the food is safe to eat or not and whether it can be expected to taste good or not. Since color is closely associated with expectations, the addition of color to food is a way to fulfill these expectations. Color is added to food for one or more of the following reasons:

1. To replace color lost during processing,

2. To enhance color already present,

3. To minimize batch-to batch variations, and

4. To color otherwise uncolored food.

Introduction

How one can differentiates between sensory science and sensory evaluation? Perhaps the simplest way would be to think of sensory science as the fundamental physiological and psychological underpinnings of sensory evaluation. It could include our basic understandings of the mechanisms of taste and odour, kinesthetic and the various techniques of scaling and statistical analysis, whereas, sensory evaluation could designate the application of this knowledge and the development of specific methods for the evaluation of the discriminative, descriptive and affective nature of products, in a problem-solving situation. When the quantitative descriptive analysis (QDA) methodology was f irst described, it represented a decade of experimentation and study of the issue that were perceived at the time to be impediments to solving “the problem of flavour characterization” (Stone et al., 1974). As noted by Pangborn (1964), new developments and knowledge about sensory evaluation were beginning to have a positive effect on its acceptance by industry, but much more needed to be done if it was to contribute in a meaningful way. Today, it is indisputable that flavour is an important attribute affecting consumer acceptance of food. “Flavour is taste plus odour”. The perception of taste is merely the detection of non-volative tastants by the tongue. On the other word, the perception of odour is the detection of odoriferous volatile aroma compounds by the olfactory nerves ending in the nose. The combination of all possible flavour stimuli we could encounter is as vast as the galaxy. However, most of the attempts to define these experiences have historically been over simplified.

13.1 Challenges in the technology transfer process
Technology transfer (TT) is more complex and involves the complex interrelationships between universities, research institutes, the private sector, the state, and society. Though TT is all about translating research findings into purposeful solutions that can support the economy and society, it is not a linear process. The challenges can be described as legal, institutional, cultural, financial, policy, and human resource. All this is accompanied by bottlenecks that inhibit or decelerate the diffusion of promising technologies.
13.1.1 Legal and intellectual property challenges
The vital component of technology transfer is the proper management of intellectual property (IP), which is often the most challenging aspect.
• Ambiguities in IP ownership: During multi-institutional or shared funder research, ownership is quite controversial. As an example, when a government lab and a university collaborate on the project, there is ambiguity as to who would have the ultimate licensing authority over the technology: the university, the lab, or the funding agency. This kind of fight hinders commercialisation and scares off industry partners.
• Lengthy patent filing and prosecution timelines: In several jurisdictions, the filings, examination, and granting of a patent may take between three and five years or more. Such delay is not compatible with the rapid cycle of invention in other fields such as ICT or biotechnology, where patent claims may become invalid before they are granted.
• High costs of IP protection: International direct patenting, like under the Patent Cooperation Treaty (PCT), is costly and involves legal services, fees, and upkeep costs. These costs are excessively high, which cannot be easily compensated by universities and startups, and where technologies are not secured or limited to local markets.

Introduction

Canning is the general term applied to the process of packaging a food in a container and subjecting it to a thermal process for the purpose of extending its useful life. An optimal thermal process will destroy pathogenic (disease-causing) Bacteria, kill or control spoilage organism present and have mineral impact on the nutritional and physical quality of the food. Although we thing of canning in term of steel or possible aluminium cans, the principle apply equally well to a variety of food containers such as glass jar, plastic and foil laminated pouches, semi rigid plastic tray or bowls, as well as metal cans of any one of several shapes, including cylindrical, oval, oblong or rectangular. The concept of aseptic packaging (sterilizing the food and the container prior to filling and sealing) also follows the same principles.

Introduction

Thermal processing is an important treatment for food preservation is, especially in the manufacture of shelf-stable foods with specific nutritional properties. It is also indispensable for determining the sensory properties, particularly, colour, flavour, and texture of fried, baked, and roasted products. As a result of heat treatment, chemical changes induced, and a plethora of new molecules are formed in foods, some of which have been claimed to be health-promoting antioxidants and anti-mutagens. However, reports suggest that thermal processing leads to the formation of certain toxic compounds, so-called process-induced contaminants in foods. The process-induced toxicants are certain compounds which are formed in food as a result of food processing, exert adverse toxicological effects, and cause potential health risks to humans. Acrylamide, furan, chloropropanols, heterocyclic aromatic amines, polycyclic aromatic hydrocarbons, and N-nitrosamines are some well-known examples of thermal process contaminants.

Introduction

The hilly states in north eastern India are not only famous for their forest wealth and awesome wild assets. These states are also known for their track record in harvesting specific crops and fruits. Some of the iconic ones are like, “Assam tea” which is famous in and outside India and popularity of “Khasi mandarin” is also well known. The small landlocked state Tripura produces quality pineapples in abundant amounts, where cv. Queen is popular among the growers. Sikkim and other states of north eastern region of India is known for their Organic Farming techniques, which is mostly attributed the nature of hill farming on this region. North-East is rich in horticultural aspect viz., f loriculture with a rich variety of medicinal plants grown there along with various fruits and vegetables. An analysis of NSSO survey data on cultivation practices shows that the North-East hill states have retained traditional practices and show an inclination towards organic agriculture that is harnessed for the development of the region with ecological benefits.

Introduction

Bread wheat (Triticum aestivum L.) is one of the most widely cultivated and consumed crops in the world. Wheat is perhaps best known for its different end-use baking properties as determined by grain texture, protein content and quality. Wheat is generally traded by and classified into “hard” and “soft” market classes on the basis of grain hardness or texture of the wheat kernel (caryopsis). Soft wheats have softer endosperm texture that fractures easily, therefore requiring less energy to mill, yields smaller particles, and has less starch damage after milling when compared to hard wheats. Hard and soft are used with slightly different connotations in different parts of the world. In Western Europe, hard is applied primarily to durum wheats and the soft applied to bread wheat. Elsewhere the term is applied to different cultivars within the species Triticum aestivum. In general, hard wheats are used for bread baking, while soft wheats are used for cookies and cake making. Hard wheat requires more force to crack the kernel, maintains a larger particle size, passes through sieves more easily and has more damaged starch MacRitchie (1980). Higher starch damage is required for good bread making quality Tipples et al. (1994) but is detrimental to the biscuit making quality.

Ice cream is not only an indulgent frozen dessert but also a food containing several nutrients derived from milk, cream, sugars, and other ingredients. This chapter examines ice cream from a nutritional and food-science perspective, focusing on its major nutritional components and energy contribution. It discusses milk fat, proteins, lactose, carbohydrates, minerals, vitamins, and the nutritional effects of formulation. The chapter also considers energy value, portion size, digestibility, and palatability. Understanding these factors helps explain why ice cream provides both nutritional and sensory value. The discussion provides a balanced foundation for evaluating ice cream as part of varied diets and developing products for different consumer requirements.

Introduction

Seasonal or annual fluctuation in weather patterns is termed as climate variability. However, climate change is a change in the mean state of weather statistic over three decades of time period. Climate change is exacerbating the challenges faced by the agriculture as well as horticulture sector. For last 10 years, Asia is facing the serious threats from climate change and variability such as tsunami, f loods and droughts. Extreme events are expected to have large negative impacts on crop productivity. The rise in temperature and reduction in rainfall under semi-arid environments are likely to reduce production of fruits, vegetables and flowers in the coming 20 years. The production and quality of fresh fruit and vegetable crops can be directly and indirectly affected by exposure to high temperatures and elevated levels of carbon dioxide and ozone. The rise in atmospheric CO2 levels due to global climate change and horticultural practices has both direct and indirect effects on secondary metabolite synthesis in plants.

Abstract

Four bread wheat varieties (PBW-138, PBW-299, PBW-343 and PBW-373), two of durum wheat (PDW-215 and PDW-233) and two of triticale (TL-419 and TL-1210) were milled to obtain 70 percent extraction flour.  The grains and the flour samples of all the varieties were evaluated for proximate composition, rheological properties and pretzel making. Physical properties of durum wheat were better followed by bread wheat and triticale. Durum wheat were harder, had higher grain weight than bread wheat and triticale.  Protein, ash, fat, total sugars and enzyme activity were higher in triticale flour than bread and durum wheat flours while durum flour had higher pigments (ppm, b-carotene). Bread wheat flour was intermediate between durum and triticale flours with respect to fineness. Rheological studies revealed triticale flour to be the weakest flour. Pretzels prepared by using optimized recipe and method revealed PBW-343 and PBW-373 best for pretzel making.

Introduction

Food ingredients sector is indicating ample prospects for growth. The segment is an obligatory element for the growth of the food and beverage sector. These ingredients are also driving the development of the healthy functional foods industry to increase by 20% growth annually. Innovation in the food and beverage market, especially in the processed food domain, has created innumerable opportunities for new product development in the ingredients market as well. The segment is driven by the growing food processing industry and India is emerging as ingredients bowl of the future. Additionally, growing urbanization coupled with industrialization and changing lifestyles have led to growing demand for convenient food that offers health benefits, over and above the basic nutritional benefits of the foodstuff. There are nearly 10 to 15 broad classes of ingredients that include the very basic ingredients as well as certain value added ingredients that have niche applications. Key ingredients are preservatives, flavours, colours, hydrocolloids/stabilizers, emulsifiers, artificial sweeteners and value added health food ingredients such as omega-3-fatty acids prebiotics, probiotics etc. Until recently, there has been limited research into functional foods in meats, while functional foods in the dairy sector have been developed to a high degree. But meat is less allergenic than many other foods and much more research into the development and marketing of novel functional meat products is required. Such meat products would open up a new market for the meat industry. Nutraceutical and functional food industry is a very vibrant industry today with the claims and a clear mandate of health, wellness and prevention of diseases as one of its main goals.

Abstract

The demand for the food for ever increasing population is always continuous, but the production is limited to specific seasons. Therefore the food grains have to be stored for sometimes. Grain is a living biological material and therefore storage structures should be suitably designed to protect them from the ravages of pests, rodents and micro-organisms. However, the storage losses account for a major portion which can be reduced to considerable extent if proper care is done. The faulty design, poor maintenance and limited knowledge of the farmers concerning storage technology have greatly added to the spoilage of the food grains during storage. Sometimes the foods if not properly stored may be edible but it may lose the essential vitamins and minerals, thus their nutritive value has been lost. There is a major requirement of a good storage structure. Various food grain storage structures (small and large scale) are described.

Introduction

Hippocrate, an ancient physician, a great thinker and also often referred as father of medicine, for the first time conceive the idea nearly 2,500 years ago that a disease is caused due to natural factors such as environmental factors, diet, and living habits. He advocated the secret of healthy living in healthy food in his famous quote “Let food be thy medicine and medicine be thy food”. But unfortunately, this wisdom about food has faded with the time and we became dependent on synthetic medicines and drugs for even life style disorders. In the last century, research advancement in the field of food science and nutrition established food not only as a source of nutrition but also a source of active food components that aid specific functions and rejuvenated the Hippocrates concept. According to the Department of Health and Human Services, USA, daily diet of a person, plays a crucial role in 5 of 10 diseases which are the leading causes of death, such as diabetes (noninsulin dependent or type 2), stroke, coronary heart disease (CHD), specific type of cancer, and atherosclerosis. In the mid-1980s, term “functional food” was introduce in Japan and defined as food that contain active components either from plant or animal origin and provide physiological benefits in addition to the basic nutritional needs.