eChapters

Galactometer: It is an instrument used for recording the specific gravity of the milk (Plate 306).

Galactose: It is an aldohexose sugar obtained by hydrolysis of lactose. Galactose is a monosaccharide and has the same chemical formula as glucose, i.e., C6 H12 O6 . It is similar to glucose in its structure, differing only in the position of one hydroxyl group. Due to this difference galactose possess different biochemical properties to glucose (Plate 307).

Galactosidase: An enzyme (actase) that hydrolyzes a galactoside. β-Galactosidase, commonly known as lactase, is an enzyme responsible to hydrolyze lactose (Plate 308).

Galactoside: A glycoside that yields galactose on hydrolysis. A galactoside is a glycoside containing galactose. The H of the OH group on carbon-1 of galactose is replaced by an organic moiety (Plate 309).

Galactosyl: A glycosyl radical C6 H11 O5 that is derived from galactose.

Fisheries as a source of food, livelihood and income is probably as old as human civilization. Millions of men and women across the world, especially the developing world, are dependent on the sector. While fish capture in the open seas has generally been a male preserve conditioned by various social, cultural and economic factors; women also have significant contributions for sustaining household nutritional and income security. They have been engaged in fishing in inshore coastal waters, inland water bodies like rivers and ponds; and in post harvest activities like pre-processing, processing, drying, salting, and allied activities like marketing, net making and mending etc. With increasing volumes of fish coming from culture fisheries the participation of men and women in these activities are also increasing. Suffice to say that both men and women contribute to the overall growth and development of the fisheries sector. However, often women and their contributions tend to be marginalized in the fisheries development debate.

Women’s roles in fisheries

In the marine fisheries sector, fishing is largely a male preserve. Women rarely venture into the sae, conditioned by cultural and social taboos rather than by skill and endurance. However, the support from women in managing the households and in taking up subsistence or other livelihood activities related to fisheries activities that may actually go into the household income security need to be acknowledged. Studies show that women comprise about 46% of the labour force in small-scale capture fisheries-related activities (FAO, World Bank, IFAD, 2008). It is as high as 73% in Nigeria to a low of 4% in Mozambique. At least 50 % of the workforce in inland fisheries and 60 % of those marketing fish are women in Asia and West Africa.

The term ‘gender’ was first used by Ann Oakley and others in 1970s to describe the characteristics of men and women which are socially determined in contrast to biological differences. The term ‘gender’ further explains, a neutral term meaning, either men or women or both are in a particular context. The goal is to improve the status of disadvantaged class and get rid of socially created and approved discriminations. The green revolution in India changed the face of agriculture but apparently it contributed to two general trends (FAO, 1996) where wealthy have benefited more from technological change in agriculture than the less well off and secondly men have benefited more than women. In general, it is true that the priorities are set by men and some women, who are unaware of gender issues, and that these are seldom considered unless the research is sociological. But even social research can be totally gender blind.

1. Proteins in solution absorb ultraviolet light with absorbance maxima at 280 and 200 nm. Amino acids with aromatic rings are the primary reason for the absorbance peak at 280 nm. Peptide bonds are primarily responsible for the peak at 200 nm.
2. Aromatic amino acids tyrosine and tryptophan give proteins their characteristic ultraviolet (UV) absorption at 280 nm, which is routinely used to estimate protein concentration. Phenylalanine and disulfide bonds also contribute to absorption at 280 nm, albeit slightly.

1.1. Introduction

The significance of milk as the most wholesome single food available in nature has never been debated. It is as ancient as mankind itself, as it is the substance created to feed the mammalian infant. All species of mammals, from the lowly rat to the mighty whale, produce milk for this purpose. Several centuries ago, perhaps as early as 6000-8000 BC, ancient man learned to domesticate species of animals for obtaining their milk for consumption. These included cows, buffalos, sheep, goats and camels, all of which are still used in various parts of the world for the production of milk for human use (Fig. 1.1 & 1.2).

Nature has made such a beautiful system that a fruit does not spoil unless its outer covering is removed and till it is there on the plant. For example banana will not spoil for long time if we do not remove its peel. Similar is the case with apple, guava, mango and many other fruits and vegetables. But as soon as the outer covering is removed the damage begins and the commodity is spoilt very soon.

Preservation is extending shelf life of fresh or processed food by using various methods and prevention or reduction of spoilage. Better the preservation, lesser the spoilage, more the spoilage poorer and inefficient is the preservation.

Therefore, in order to prevent or reduce the spoilage, we have to first identify and understand the causes of spoilage. There are chiefly 3 agencies that cause spoilage in fruits and vegetables i.e. (i) microorganisms, (ii) enzymes & chemical changes and (iii) man, animals, rodents, insects, etc. For effective preservation we have to check the growth and activity of these spoilage causing agencies. So, in order to prevent spoilage and preserve a perishable commodity for long time the following principles and methods are to be followed.

Abstract

The genetic improvement of crop plants is possible only through employing an appropriate breeding technique. The use of plant breeding technique depends on mode of pollination and reproduction of plant species e.g. selection and hybridization are used in sexually reproduced species, while clonal selection in asexually propagated plant species. The plant species/ varieties are usually derived through conventional techniques (vi z. introduction, selection, hybridization etc.), which are commonly used in various breeding programmes, while some modern techniques viz. transgenic breeding and marker assisted selection etc. are also available which are equally effective for improvement of all crop species. Various techniques applied for development of new varieties and hybrids are briefly described in this section.

Plant breeding is an art, science and technology of improving genetic make-up of crop plants in relation to their economic usefulness for mankind. Various techniques/methods of breeding used for genetic improvement of crop plants are: introduction, selection, hybridization, mutation, transgenic breeding etc.

Classification of Breeding Techniques: Plant breeding techniques are classified as conventional and modern breeding techniques.

Ginger is used extensively as a spice in cuisines throughout the world. Ginger belongs to Zingiberaceae family and an English botanist William Roscoe (1753-1831) gave this plant the name Zingiber officinale in the year 1807. The name of the genus Zingiber derives from a Sanskrit word denoting “horn shaped” in reference to the protusions on the rhizomes (Ghosh et al., 2011). It is an oldest rhizome widely domesticated as a spice where the edible part is the swollen underground stem or rhizome. The Zingiberaceous plants have strong aromatic and medicinal properties and are characterized by their tuberous or non-tuberous rhizomes (Chen et al., 2008). Ginger is a medicinal plant that has been widely used all over the world, since antiquity, for a wide array of unrelated ailments including arthritis, cramps, rheumatism, sprains, sore throats, muscular aches, pains, constipation, vomiting, hypertension, indigestion, dementia, fever and infectious diseases (Ali et al., 2008). Ginger has direct anti-microbial activity and thus can be used in treatment of bacterial infections (Tan and Vanitha, 2004).

5.1. Introduction

Glass is one of the oldest packaging materials used for food. The use of glass as a packaging material dates back to 3000 BC where it was the first object to be used for containing and carrying food objects. It is made by cooling a heated fused mixture of silicates, lime and soda. It is an amorphous material in which all the constituents individually form an irregular network at microscopic level. It means it has failed to form a definite crystalline structure during cooling. Glass is defined as “amorphous, inorganic product of fusion that has been cooled to a rigid condition without crystallizing (ASTM, 2010)”. It has no definite melting point.

Global onion research connects crop domestication, genetic diversity, nutrition, therapeutics, production, breeding and post-harvest technology. Onion contains organosulphur compounds, quercetin derivatives and other phytochemicals associated with antimicrobial, antioxidant, cardioprotective and anticancer effects. Despite high global production, productivity differs substantially among countries, and storage losses remain a major economic concern. This chapter reviews global production trends, germplasm resources, breeding strategies, phytochemistry, therapeutic potential and emerging storage technologies. Landraces, cultivars and wild relatives provide valuable traits for yield, storability and stress resilience. Advanced treatments such as ozonation, cold plasma and irradiation demonstrate promise, although wider commercial adoption, economic validation and regulatory development remain necessary.

1. Key Forces Shaping Food Packaging • Changing Consumer Priorities • Modern consumers are increasingly choosing food packaging that aligns with values of health, convenience, and sustainability. The demand is growing for packaging options that are recyclable, biodegradable, or reusable. Consumers also expect transparency, with clean labels and QR codes providing details on ingredients and sourcing, which has become essential for building trust (Santeramo et al.,2022) • Environmental Sustainability • Sustainability remains a powerful influence on packaging innovation. Reducing single-use plastics, increasing recyclable options, and adopting circular economy principles are all priorities. Both consumers and businesses are actively seeking solutions that reduce environmental impact, such as renewable, compostable materials and designs that minimize waste ( Fao et al ., 2022)

Pineapple is a wonderful tropical fruit having exceptional juiciness, vibrant tropical flavour and immense health benefits. Pineapple contains considerable calcium, potassium, fibre, and vitamin C. It is low in fat and cholesterol. Vitamin C is the body’s primary water soluble antioxidant, against free radicals that attack and damage normal cells. It is also a good source of vitamin B1, vitamin B6, copper and dietary fibre. Pineapple is a digestive aid and a natural Anti-Inflammatory fruit. A group of sulfur-containing proteolytic (protein digesting) enzyme (bromelain) in pineapple aids digestion. Fresh pineapples are rich in bromelain used for tenderising meat. Bromelain has demonstrated significant anti-inflammatory effects, reducing swelling in inflammatory conditions such as acute sinusitis, sore throat, arthritis and gout and speedy recovery from injuries and surgery. Pineapple enzymes have been used with success to treat rheumatoid arthritis and to speed tissue repair as a result of injuries, diabetic ulcers and general surgery. Pineapple reduces blood clotting and helps remove plaque from arterial walls. Studies suggest that pineapple enzymes may improve circulation in those with narrowed arteries, such as angina sufferers. Pineapples are used to help cure bronchitis and throat infections. It is efficient in the treatment of arterioscleroses and anaemia. Pineapple is an excellent cerebral toner; it combats loss of memory, sadness and melancholy. Pineapple fruits are primarily used in three segments, namely, fresh fruit, canning and juice concentrate with characteristic requirements of size, shape, colour, aroma and flavour.

Introduction

It is an eminent actuality that the diets of end users are being advanced globally; however, the patterns of food procurement and food safety protocols diverge across countries. The fundamental rationale of the trend is that the consumer awareness with regard to food safety, quality and variety has been proliferated greatly. Looking back to the history of food industry, it is unquestionable that the past has a full frame of misfortune, indignity and many disastrous incidents. Moreover, the entire muddle was not always related with microorganisms; numerous of them were associated with environmental problems, technological advancements or certain alterations in production protocols and management.

Introduction

Wheat is the most important cereal crop to the human kind. It is the main source of energy and nutrition in human diet. Wheat is consumed in the form of large number of end products as chapati, bread, biscuit, cakes, pretzels, noodles and pasta products. Millions of people are involved in milling, baking and pasta products industry with huge turnover per annum. However, each end-use product of wheat has it’s own specific requirement for example basically hard wheats along with strong gluten and high protein content are used for bead making. Soft wheat with weak gluten and low protein content are required for biscuit making Souza et al. (1994). Durum (tetraploid) wheat is used for pasta products as macaroni, vermicelli and spheghatti and Dicoccum for therapeautic purposes. Often chemical improvers are used to improve the dough properties for these products. Most of these chemicals have been banned because of their toxic effects. Therefore, only alternative is to develop varieties suited to meet the requirements of these end-use products. This needs better understanding of molecular basis of grain quality to accelerate breeding for producing wheat varieties for each end-use product separately. Storage proteins are the major component of grain which determines end-product quality. In this chapter detailed structure, genetics and functionality of gluten proteins are described.

Introduction

Meat derived from animals are subjected to various contaminations from number of sources. The animal itself is a major contributor of both pathogenic and spoilage organisms. Further contamination may be introduced from water used, equipment used for product preparation, from the meat handlers and the surrounding environment. Microbiological problems such as food poisoning or spoilage may arise when the desired effect is not achieved and is usually due to errors in the handling or processing procedures. The detection and rapid correction of such errors and their future prevention is a major objective of any quality control system.

In traditional approach to meat and meat product quality control system, only the samples of the final product were analyzed by laboratory test to check for compliance with specifications. However, the responsibility for control of hazards rests with individuals involved in all stages from farm to ultimate consumer. And the control of hazards at each stages of food chain may be achieved by Hazard Analysis Critical control point (HACCP). Hazard analysis critical control point is an internationally recognized system that helps to ensure the manufacture of safe food products. HACCP is not a zero risk system but rather a system designated to minimize the risk of food safety hazards. HACCP concept is a systematic and rational approach Firstly by consideration of the hazards i.e., microorganisms or their toxins, that need to be controlled in a specific operation by structured hazard analysis and secondly on the identification of the most effective means of controlling the identified hazards. This system, by focusing attention on the factor that directly affects the microbiological safety and quality of meat foods, eliminates wasteful use of resources and superfluous consideration. As a consequence, the cost/benefit relationships are more favorable. The system is applicable at all levels of meat food chain from farm production through processing, transporting, merchandising and ultimate use in the meat food service establishment or at home. Ensuring food safety and quality is the responsibility of all links in the food chain. Now a day’s food consumers are very much health conscious and they want their food to be safe and of good quality. As meat being highly perishable and high risk food product, it is very much imperative on the part of meat and meat products producers and exporters to produce safe and quality meat to stand in the competitive world and further hygienic meat processing is important not only to provide safe and wholesome meat but to provide a good public image and to increase consumer demand.

During the latter part of the 20^th century, rapid economic development in most countries coupled with population growth propelled the inevitable demand for more food and manufactured goods. However, requirement of more food is placing unprecedented demands on agriculture and natural resources. Humans have made agriculture the dominant environmental threat by clearing forests, cultivating marginal lands, and intensifying farming in sensitive landscapes and watersheds. Most of the land use systems in the tropics are characterized by a rapid decline in productivity and high rates of soil and environmental degradation which need to be addressed in a proper way.

Agriculture has changed radically since the end of World War II. Productivity of most crops has scaled to new levels because of the adoption of new technologies, machines, increased chemical inputs, and government policies. However, continuing agricultural production without harming the environment is a challenge, which must be tackled along with economic growth. Some of the environmental issues related to agriculture are top soil loss, groundwater contamination, air pollution, greenhouse gas emission, decline of family farms neglect of the working conditions of farm labourers, new threats to human health and safety by the spread of new pathogens, economic concentration in food and agricultural industries, and disintegration of rural communities (Brodt et al, 2011). This situation prompted world nations, political leaders, scientists and planners to pay more attention to the concept of sustainable development. As a concept, sustainability is concerned with the continuity of environmental economic, and social aspects of human society.

The Government of India has accorded ‘high priority’ status to the food processing industry. The Ministry of Food Processing Industries (MOFPI) has been set up as a nodal agency for formulation and implementation of the policies and plans for the food processing industries.

With an overall objective of positioning India as the ‘Food Basket’ to the world, several initiatives have been undertaken with the objective of promoting investments, innovation and bringing best practices. This vision is in line with the ‘Make in India’ initiative of the Government (CII, 2019).

5.1. Policy Interventions (MOFPI, 2019)

5.1.1. Infrastructure Development

Fragmented, inadequate, and inefficient infrastructure along the supply chain has been identified as one of major factor inhibiting growth of food processing sector. As adequate investment for infrastructure has not been forthcoming from private sector, government will continue to assist, participate and incentivize creation of supply chain infrastructure for food processing sector.

India is a leading producer and exporter of onion, but its productivity, market stability and post-harvest efficiency remain constrained. Farmers face fragmented holdings, climate uncertainty, price fluctuations, inadequate storage, technological gaps and significant post-harvest losses. This chapter reviews government programmes and policies related to financial support, irrigation, infrastructure, crop insurance, market access, farmer organizations, storage, processing and agricultural research. It also discusses export-quality requirements, grading, packaging and pesticide-residue standards. Research priorities include stress-resistant varieties and hybrids, drip irrigation, fertigation, growth regulation, sprout control and non-thermal storage treatments. Coordinated policies and technological dissemination can improve farmer income, productivity, quality and market resilience.

1. INTRODUCTION

Grading and packing of fruits ensure the safe transportation from the farm to the storage and consumer centre, while reducing the damage during transportation. The properly graded fruits should be packed in such a way that they do not collide with each other during transportation. Throughout the entire handling system, packaging can be both an aid and hindrance to obtaining maximum storage life and quality. Before the fruit is packed in a suitable container/package it is graded according to the standard grades accepted in the market. Packaging is one of the important components after grading during the handling of fruits. Packaging is meant to protect the commodity by immobilizing and cushioning it, but temperature management can be made more difficult if packing material block ventilation holes. Packing material can act as vapour barriers and helps in maintaining higher relative humidity within the package. Packaging material such as trays, cups, wraps, liners and pads may be added to help immobilize the produce. A wide variety of containers such as wooden boxes, plastic crates, corrugated fiberboard boxes are important package used in the transportation and distribution of fruits in most of the developing countries.

Introduction

Fruit and vegetable development starts with formation of an edible part fruit setting, seedling emergence, tuber development and ends with loss of edible character, or spoilage through physiological deterioration, development of fibrous character or spoilage through microbiological intervention . The state of maturity of a fresh horticultural commodity is therefore is a continuum process along the development scale. The term mature implies that point in the development scale when the horticultural commodity in the state that is ready to use (consume, process, store). For the packing house, maturity means suitability for storage followed by sufficient shelf life to assure profitable supply to markets. On the other hand, the retail consumer may value colour, flavour, or textural attributes. This implies that maturity and an appropriate compromise must be achieved through the marketing process.

Quality, on the other hand, relates to the degree of the satisfaction that the consumer or customer is likely to obtain through the use of mature commodity. Maturity and quality are interrelated with market expectations or requirements. These expectations or requirements are expressed through regulations or guidelines of grower groups or through legislative authority expressed as quality standards or grades and enforced through inspection agencies associated with government departments.