eChapters

Abstract

Health-conscious consumers are increasingly seeking functional foods in an effort to control their own health and well-being. The field of functional foods, however, is in its infancy. Claims about health benefits of functional foods must be based on sound scientific criteria. A number of factors complicate the establishment of a strong scientific foundation. These factors include the complexity of the food substance, effects on the food, compensatory metabolic changes that may occur with dietary changes, and, lack of surrogate markers of disease development. Additional research is necessary to substantiate the potential health benefits of those foods for which the diet-health relationships are not sufficiently scientifically validated. Research into functional foods will not advance public health unless the benefits of the foods are effectively communicated to the consumer. Finally, those foods whose health benefits are supported by sufficient scientific substantiation have the potential to be an increasingly important component of a healthy lifestyle and to be beneficial to the public and the food industry. Mounting evidence supports the observation that functional foods containing physiologically-active components, either from plant or animal sources, may enhance health. It should be stressed, however, that functional foods are not a magic bullet or universal panacea for poor health habits. There are no “good” or “bad” foods, but there are good or bad diets. Emphasis must be placed on over-all dietary pattern, which follows the current Dietary Guidelines, and is plant-based, high in fiber, low in animal fat, and contains 5-9 servings of fruits and vegetables per day.

Abstract

The objective of this chapter is to provide an overview of heat pump dryer (HPD) and recent developments in its applications for drying of agricultural and food products. The basics of heat pump dryer, classification, operating principle, configuration and control system have been presented for better understanding. Many researchers have concluded that HPDs use energy more efficiently than electrical dryers. The heat pump dryer is best suited for drying high value commodities such as fruits, vegetables, spices, condiments, herbs, medicinal and aromatic plants at near ambient temperature for producing better quality dehydrated product.

3.1 Introduction

The subject of heat transfer is firmly grounded in the sciences of thermodynamics and fluid mechanics. It has become exceedingly important for engineers to possess a clear understanding of the principles of heat transfer and its application to a large number of problems. In view of process engineering, the knowledge of heat transfer and its application is most important, because heat transfer is one of the basic unit operations in the agricultural processing activities. The design of process equipments, refrigerators, boilers or type of heat exchangers, thermal treatment of food grains, cooling of perishables, pasteurizations, sterilizations, freezing of milk and fruit juices and a large number of similar applications involve consideration of heat transfer rates. There may be other situations where heat is being generated during a certain operation, and may be detrimental to the equipment and the food product. In such cases we are often faced with the task of removing the undesirable amount of heat as far as possible.

SYNOPSIS

Flavor is the sensory impression of a food or other substance, and is determined mainly by the chemical senses of taste and smell. The flavor of the food, as such, can be altered with natural or artificial flavorings which affect these senses. Smell is the main determinant of a food item’s flavor. While the taste of food is limited to sweet, sour, bitter, salty, umami (savory), pungent or piquant, and metallic – the seven basic tastes – the smells of a food are potentially limitless.

1. Herbs and Spices
       
    1.    International Standards Organization (ISO) defines spices and condiments as: Vegetable products or mixtures thereof, free from extraneous matter, used for flavouring, seasoning and imparting aroma in foods.

    2.    Rosengarten describes a spice as a product which enriches or alters the quality of a thing, for example altering the taste of a food to give it zest or pungency; a piquant or lasting flavouring; or a relish. The term ‘spice’ is thus used to cover the use of spices, herbs and certain aromatic vegetables to impart odour and flavour to foods.

    3.    Herbs may be defined as the dried leaves of aromatic plants used to impart flavour and odour to foods with, sometimes, the addition of colour. The leaves are commonly traded separately from the plant stems and leaf stalks.

High Humidity Hot Air Impingement Blanching (HHAIB) is a modern blanching technology developed to overcome several limitations associated with conventional blanching. This chapter introduces HHAIB as a pretreatment used before drying, freezing, canning and frying, particularly for fruits and vegetables. It explains the underlying principle of high-humidity hot-air impingement and its effects on heat and mass transfer. The chapter discusses applications in pre-dehydration treatment, colour preservation, texture and structural integrity and enzyme inactivation. Comparative analysis with conventional blanching methods highlights its potential advantages in drying efficiency, quality retention and energy utilization, making HHAIB an important emerging technology for modern food processing.

1. Introduction

Fruit products have their unique identities having large content of micronutrients, polyphenols, vitamins, flavonoids and other nutritional compounds. Characteristic appearance and flavors distinguish among various fruit based products like juice, puree, jam, jelly, squash and other several varieties. Main concern of this fruit processing industry is the stability of the products throughout the post processing storage. Thermal treatment as mean of preservation of these products is the common process implemented so far. It ensures the safety of the product but lacks in retaining the nutritional intact that like of fresh fruit. Today’s consumer demand for minimally processed fruit products and “natural” fruit products tend to think of alternative thermal processing.

High pressure processing (HPP), a relatively new concept compared to conventional thermal processing, also sometimes known as high hydrostatic pressure (HHP), or ultra high pressure (UHP) processing, is a non-thermal food processing method that subjects liquid or solid foods, with or without packaging, to pressures ranging between 50 and 1000 MPa. HPP has already been established itself as an alternative to thermal processing. In food processing it is of great interest due to its ability to inactivate food borne microorganisms and enzymes, at low temperature, without the need for chemical preservatives and it is less detrimental than thermal processes to low molecular weight food compounds such as flavoring agents, pigments, vitamins, etc., as covalent bonds are not affected by pressure. Pressure-treated foods have sensory properties similar to fresh products, which is a major advantage in fruit processing as it matches consumer demand for healthy, nutritious and ‘‘natural’’ products. HPP of fruit products offers the chance of producing food of high quality, greater safety and increased shelf life (Hayashi 1989; Gould 1996; Butz and Tauscher 1998).

4.1 Introduction

The purpose of processing the food is to make it safe and healthy for human consumption. The term food processing refers technologically anything, which transforms raw ingredients into consumer ready products, with the aim of stabilizing food products by preventing or reducing deteriorative changes in quality. The objective of food manufacturers is to develop, modify and employ those processing technologies that retain or create desirable sensory qualities in food and eliminate or reduce undesirable changes due to processing.

The purpose of food processing is to increase the shelf life of food before spoiling (preservation); to remove, destroy or inhibit pathogens and toxins (food safety); to change flavor, texture, aroma, color or form (variety); to reduce preparation times and make food more portable (convenience); to restore and/or raise nutrient levels in food (nutrition).The various food processing methods used extensively in food industry include physical (high temperature, freezing, chilling, dehydration, packaging), chemical (control of storage gases, reduction of water activity, pH, addition of chemical additives or spices) preservation methods.

Traditionally, food preservation has been associated with thermal treatments alone or in combination with biochemical or chemical methods. For example, the thermal processing of milk is done various thermal treatments viz. at 63^oC for 30 min for low temperature long time (LTLT), 72^oC for 15 seconds for high temperature short time (HTST) pasteurisations and up to 140^oC for a few seconds for ultra high temperature (UHT) treatment. However, such thermal treatments effectively reduce level of microorganisms but in long-term preservation, it may lead to losses of desired organoleptic attributes and destruction of temperature liable nutrients and vitamins. The limitations involved with thermal processing has been overcome by employing chemical preservation, cool chain management and process hygiene in the formulation and production of food products.

Food and nutrition are necessary for all living beings to maintain good health[1]. Thermal treatment is commonly used for preservation of food. Although application of thermal treatment can ensure food safety, it may cause undesirable changes in the nutritional, sensory and functional properties of food products[2]. Due to growing awareness of connection between the diet and the health, there is an increase in demands for fresh-like, palatable, additive-free and microbiologically safe food products with high nutritional value and quality[3].

Ice cream has evolved from simple frozen preparations into a sophisticated food industry combining dairy science, food chemistry, refrigeration, microbiology, processing technology, packaging, and cold-chain management. This chapter introduces the historical development of ice cream and explains its transformation from a luxury product into a widely consumed frozen food. It examines the characteristics of the industry, major categories of ice cream and related frozen products, flavour classifications, composition, and quality characteristics. The chapter also presents the basic manufacturing process, important quality-control parameters, common manufacturing challenges, and emerging industry trends, providing a foundation for understanding ice cream as both a technical product and a commercial business.

History

Pineapple was discovered a little later in time than expected. It had been a staple of the American diet for years before Christopher Columbus, an Italian explorer, discovered it on November 4, 1493. (www.library.ucf.edu; www. levins.com). That’s when the Guadeloupe Island natives served him and his colleagues this delectable fruit, pineapple. The varieties cultivated at the time were all seedless, and many typical wild cultivars were missing (Collins, 1948), demonstrating the area’s early vegetation. He brought the fruit to Europe. The European travellers were so fascinated by this fruit that they frequently mentioned it in their accounts (Morrison, 1963; Collins, 1960).

It was known as ‘nanas’ or ‘ananas’ by the people of South America (‘ananas’ meant ‘excellent fruit’ in Guarani). People in the area literally cultivated it according to a strict protocol, and they were especially keen to select superior varieties in order to increase fruit yield and quality. They gained a thorough understanding of crop agronomy and production. They also put into practise some of the processing standards that are still in use today around the world (holidayandtraveleurope.blogspot.in). Pineapple wine was made, fibre was extracted, and pharmacological needs such as emmenagogue, abortifacient, antiamoebic, vermifuge, stomach disorders, and poisoning arrow heads were met (Leal and Coppens d’Eeckenbrugge, 1996). In 1980, Antoni and Leal proposed that the pineapple originated in an area further north, between 10° N and S latitudes and 55–75° W longitude, which included parts of north western and eastern Brazil, Columbia, Guyana, and Venezuela. During colonisation, Spanish and Portuguese navigators were instrumental in the distribution and spread of pineapple to all corners of the globe (www.daf.qld.gov.au 2015).

1. Introduction

Raw milk is an emulsion. It is a mixture of milkfat globules, Solid Not Fat (SNF) and water. Over time, milkfat globule separate out from milk serum and comes to the surface of milk as a layer of cream due to the low density of milkfat or due to heating of milk. When milk is heated rapidly and continuously, some of the water in it evaporates from the surface. This exposes proteins and fat molecules, which bind and dry out and forms a skin like film on the surface. 

13.1 Introduction

Hospitality industry is the second largest industry in the world. It is well diversified and can be chosen as per the interest. Hospitality management involves planning, organizing, directing and controlling human and other resources within the different segments of hospitality industry i.e. lodging, restaurant, travel and tourism, institutional management, recreational management, meeting and convention planning industries. Although, these all are separate but related segments of the hospitality industry and are interrelated to provide good and efficient services to the guests and users. Hospitality industry provides services which are need oriented and differ in various parts of the world as per regions and the traditional styles.

The first building created specifically for hotel was ‘City Hotel’ with 73 rooms at 115 Broadway, New York in 1794. Pallonjee Pestonjee established the very first western-style hotel in India, “The Bristol Hotel” in Mumbai in 1840. According to the report of the department of Tourism, Government of India, at the end of the year 2004, there were 167 Five star hotels with approx. 28,900 rooms, whereas 126 Four star hotels, with 8,831 rooms [2]. To expedite the ongoing process of classification/re-classification of functioning hotels in one to three star categories, five Regional Committees have also been set up in Delhi, Mumbai, Kolkata, Guwahati and Chennai to conduct inspection [3].

INTRODUCTION

The concept of hurdle technology has been developed as a new way to realize safe, stable, nutritious and economical foods. It employs combination of different preservation techniques to achieve a multi-target, mild but reliable preservation of foods. The application of hurdle technology in food preservation is increasing rapidly worldwide. Over the years, insight into the hurdle effect has been broadened and the application of hurdle technology has been extended. A better understanding of the occurrence and interaction of food preservative factors (hurdles) in foods is the basis for improvements in food preservation. If the hurdles for the microbes are known, the microbiological stability and safety of this food might be optimized by changing the intensity or quality of these hurdles. Using the proper combination of hurdles, it is possible to improve not only the microbial stability and safety but also the sensory and nutritive quality as well as the economical aspects of food. The hurdle concept is also referred to as food preservation by combined methods, combined process, combination preservation or combination processing techniques. The hurdle effect is of fundamental importance for the preservation of foods. The illustration of hurdle effect was first introduced by Leistner in 1978. Based on the understanding of hurdle effects, the concept of hurdle technology was derived (Leistner 1985).

Safe, wholesome and nutritious food is vital for sustenance, good health, food and nutritional security and augmentation of sustainable development of an individual. Also, safe food helps in the growth of the national economy and enhances the trade and tourism sector. Foods that are unsafe containing various kinds of microorganisms can cause chronic diseases or illnesses varying from diarrhea to cancer.

Indicator bacteria are types of bacteria that are used to provide an indication of poor hygiene, inadequate processing and or post - process contamination in seafood, water, feed, ice, equipments, workers, etc. Absence of indicator bacteria in seafood and aquaculture products provides a degree of quality assurance that the fishery products are hygienically good and have employed proper processing methods whereas their presence clearly indicates either severe problem or failure occurred during the processing, under-processing or post-process contamination. The indicator bacteria in fish and fishery products are mainly from enterobacteriaceae and coliforms group of bacteria. Traditionally, indicator micro-organisms have been used to suggest the presence of pathogens (Berg, 1978) and it includes the general microbial Process indicators, Faecal indicators, and Index and Model indicator organisms. The Process indicator is a group of organisms that indicates the efficacy of a processing and tested by Total Plate count (TPC)/ Total heterophilic count or total coliforms (MPN method). Fecal indicator is a group of organisms that indicates the presence of fecal contamination and could be tested for fecal coliforms, thermotolerant coliforms (MPN method) and E.coli (EMB and IMViC test). Index and model organisms are a group of organisms that indicates the presence of pathogens such as E.coli are an index for Salmonella and coliphages as model of human enteric viruses. The pathogenic indicator bacteria viz., Coliforms, Fecal coliforms, E.coli, Klebsiella, Enterobacter, Citrobacter, Fecal Streptococci, Sulphite reducing clostridia, Clostridium perfringens, Bifidobacteria, Bacteriophages, coliphages and Bacteroides fragilis etc., are associated with food poisoning. In addition, pathogenic viruses, protozoa and parasites are also present in fecal matter. Fecal contamination is mainly from sewage of human source, livestock, poultry manure, pets and wildlife. Infection caused by these pathogens mainly depend on the level of microbial load.

Abstracts

To ensure safe food and adequate sanitation programs, the equipment used for processing of food products must be designed, fabricated, constructed, and installed according to sound hygienic design principles. This ensures the equipment can be adequately cleaned and sanitized, and that surfaces are resistant to daily exposure to corrosive food products and cleaning/sanitizing chemicals. This chapter focuses primarily on fundamental principles of hygienic design, which protect the product from microbial, chemical, and foreign-body contamination. This is followed by a discussion of general aspects of hygienic construction and design of food equipments, the selection of materials of construction and specification of surface finishes, fabrication, installation and cleaning and sanitization. Quality of raw materials or foods ingredients, proper processing, packaging and storage of finished products decides the quality of the food products. Planning for plant and equipment layout, its design, services (water, air, refrigeration, steam), waste disposal etc. are some of the critical factors, which contributes to quality. In addition, the food processing equipment must comply with strict standards and regulations, which are necessary for securing the quality and safety of the food products to the consumers.

Ice bank cooling: Storing of fruit and vegetable in storage chamber with positive ventilation and system countries where ice formation is allowed during night time (as electricity cost of night is less as compared to the day time). Melting of ice occurs during day time and with proper air circulation by means of ventilation process, approximately 0.5 10C temperature with 90% RH in the chamber is maintained. Ice Bank Cooler / Air forced cooler leads to desiccation of the produce (Plate 359). So use forced air high humidity cooler and these are known as Ice Bank Cooler. Ice bank coolers are useful for strawberry.

Ice cream: Ice cream may be define as frozen dairy product made by suitable blending and processing of cream and other milk products together with sugar and flavour.

Ice cream cone: A thin crisp edible cone for holding ice cream and filled with ice cream.

Ice point: It is the temperature of equilibrium between ice and water under normal atmospheric pressure (Plate 360).

Ichthylogy: It is the branch of the zoology that deals with the study of fishes (Pisces).

Icicle: It is small tapering piece of the ice formed by freezing of dropping water (Plate 361).