eChapters

B.T.U.: It stands for British thermal unit. The heat required to raise the temperature of one pond of the water through 1^° F is called BTU.
Baby back ribs: Meaty pork ribs cut from the lower back rib section.

Bacitracin: A polypeptide antibiotic isolated from a bacillus (Bacillus subtilis or B. licheniformis) and usually used against gram-positive bacteria.

Back Bacon / Canadian bacon: Bacon cut from the loin that has little fat and is cut into round or oblong slices.

Kharif onion helps maintain supply and stabilize prices when stored rabi onions become scarce. Its production is nevertheless challenged by high temperature, excessive rainfall, humidity, unsuitable varieties and limited availability of quality seed. Onion is biennial for seed production and requires bulb production followed by replanting for flowering and seed formation. Its protandrous flowers encourage cross-pollination, making adequate isolation and pollinator activity essential. This chapter explains short-day varietal requirements, bulb selection, vernalization, isolation, field management, pollination, harvesting, seed processing and storage. Improved infrastructure, organized production and farmer training are required to ensure continuous supplies of genetically pure, high-quality kharif onion seed.

Foods are classified into three groups on the basis of ease of spoilage. Spoilage meant a condition produced by the excessive growth of microorganisms leading gradually to decay or decomposition. The stable or non perishable foods like sugar, flour, grains and dry products do not ordinarily spoil unless handled carelessly. The semi-perishable food like potatoes, onions, apples, waxed fruits, fruits and vegetables having thick skin can be protected from spoilage if properly handled and processed. The perishable foods, like livestock products, seafood, and poultry items, dairy products, and most fruit and vegetables spoil readily unless special preservatives methods are used. The spoilage of foods may be caused by molds, yeast, bacteria, enzymes, food constituents and insects. The use of food additives have become necessary to prevent spoilage other wise caused by the growth of bacteria, yeasts and molds.

Food spoilage usually refers to undesirable changes occurring in food due to the action of micro-organisms, insects and enzymes. The original nutritional value, texture, flavour of the food are damaged, the food become harmful to people and unsuitable to eat. Today however, preservation has used such factors as temperature, water activity, pH, gases, organic acids, salts, antibiotics, irradiation, packaging and various combinations of these factors. Foods vary greatly in the length of time for which they can be held in their natural form without spoilage. Preservatives retard product spoilage caused by mold, air, bacteria, fungi or yeast. Bacterial contamination can cause food-borne illness, including life-threatening botulism.

1.       Introduction

2.    Lipid Storage in Fish
    
3.      Factors Influencing Nature of Lipids in Fish
    
4.    Composition of Fish Oils
    4.1    Nature and composition of fatty acids
    4.2     Triacyl glycerols
    4.3     Phospholipids
    4.4     Diacyl glycerol ethers
    4.5     Wax esters
    4.6     Hydrocarbons
    4.7     Sterols
    
5.    Autoxidation of Fish Lipids
        
    5.1    Mechanism of autoxidation
        
    5.2     Factors influencing lipid autoxidation
        
    5.3     Control and prevention of autoxidation
    
6.    Lipid Autolysis
    
7.    Rancidity Problem in Fish
    7.1     Indices of oxidative rancidity
    
References

E numbers: Each food additive used in the food industry has been given a specific number code for their identification. These numbers are called as E numbers. These E numbers are used within the European Union. The word prefix “E” stands for Europe. They are commonly used on the food label through out the European Union. These are not used in Australia and New Zealand. The different food additives are given different E numbers depending upon the type of food additive like E100-E199 (food colours), E200-E299 (preservative), E300-E399 (antioxidants), E400-E499 (thickners, stabilizers, emulsifier), E500-E599 (pH regulator, anticaking agent), E600- E699 (flavour enhancers), E700-E799 (antibiotics), E900-E999 (miscellaneous like waxes, synthetic glazes, packaging gases, sweetners, foaming agents) and E1000-E1099 (additional chemicals).

Eovalue: It is the thermodynamic favourability of the reaction.

India has made considerable progress in improving its food security. The agricultural development strategy pursued in the country, particularly since the mid-sixties, is recognized and appreciated world over. The integration of agricultural research with quality education and a properly planned extension education system has been one of the fundamental foundations of this developmental strategy, which also led to revolutions in many other sectors of agriculture and allied enterprises. As a part of this strategy, several programmes of transfer of technology from research stations to farmers’ fields were launched in the country. These included National Demonstration Project, Lab to Land Programme, Operational Research Project and Krishi Vigyan Kendras (Farm Science Centers). The programmes were continuously reviewed from time to time and reformulated for their effectiveness. Presently the Krishi Vigyan Kendras (KVKs) have been recognized as an effective link between agricultural research and extension system in the country (Venkatasubramanian et. al., 2009).

Krishi Vigyan Kendras (Farm Science Centers), an innovative science-based institution, were established mainly to impart vocational skill training to the farmers and field-level extension workers. The concept of vocational training in agriculture through KVK grew substantially due to greater demand for improved/agricultural technology by the farmers. The farmers require not only knowledge and understanding of the intricacy of technologies, but also progressively more and more skills in various complex agricultural operations for adoption on their farms. The effectiveness of the KVK was further enhanced by adding the activities related to on-farm testing and front-line demonstrations on major agricultural technologies.

Due to inadequate intakes of vitamins and minerals, half of the world's population suffers from micronutrient malnutrition. An adequate amount of wholesome as well as diverse foods are required for the proper growth and development. In addition to calories requirements, these foods should provide various nutrients. In India, ~70% of children do not get the required calories either due to lack of enough food or diverse food. This indicates that these children are also incapable of fulfilling their protein, minerals and vitamins requirements. Diets that lack diversity can be deficient in certain nutrients. Due to the micronutrient composition of the soil of a region, or because of the intrinsic insufficiency of the normal diet the staple foods of some region can lack particular nutrients. The individual plant foods are often deficient in certain nutrient components due to the varying level and composition of food nutrients in different food crops. Some crops are rich in one component but low in other. For example; legumes are usually high in protein, but deficient in essential amino acids like methionine whereas, wheat and rice are rich in carbohydrates but contain little essential amino acid such as lysine, iron, and lack provitamin A. Relying on a single food crop as major staple source of nutrients thus will not attain a nutritionally complete diet and result in malnutrition and deficiency diseases, which often occur in populations of developing countries, mainly due to poverty. Globally, over one billion people are undernourished and food security is a major issue with the world's population forecast reaching to nine billion by 2050.

Introduction

India is bestowed with varied agro-climatic conditions. Thus, horticultural crops have lot of potential in the country. India has witnessed voluminous increase in horticulture production over the last few years, which has undoubtedly doubled the income of farmers. As a result, the country has emerged as the 2nd largest producer of fruits (102.48 million tonnes) after China during 2020-21 (Anonymous, 2023). The abundance of fruits ranging from tropical delights like mango, banana, guava and papaya to temperate fruits such as apple, peach, plum, apricot and pear, have laid a robust foundation for the growth of the fruit processing industry. This chapter delves into the dynamics of fruit processed products in both local and international markets, exploring the challenges, opportunities and strategies for sustained success. Fruit processing plays a crucial role in adding value to horticultural produce, enhancing shelf-life and meeting the diverse demands of local and international markets. In India, a country blessed with abundant fruit varieties, the processed fruit industry has been witnessing significant growth, catering not only to the domestic market but also making strides in the global arena. The processing of these fruits into various products such as juices, pulps, concentrates, jams and dried fruits has emerged as a thriving industry. This chapter will provide insights into the current state of fruit processed products in India, their importance for both local consumption and export markets, challenges faced by the industry and potential avenues for the future growth.

Table cream: It is also called coffee cream, single cream or homogenized cream. It is used in coffee and tests about 20% butter fat.

Table oil expeller: It is a type of the machine that is used for extraction of the oil from the oil seeds (Plate 230).

In the previous chapter the physical methods of fruit and vegetables processing and preservation have been discussed. The present chapter deals with chemical method of fruit and vegetable preservation. In this method of preservation of fruits and vegetables, chemicals as preservatives are used to prevent the spoilage of fruit and vegetable products. These preservatives react with food (produce) constituents or microorganisms and create unfavourable conditions which hinder growth, activities and multiplication of microbes responsible for spoilage of food products. These chemical agents have maximum permissible limit of their use as law. They can be classified into two classes class I and class II.

Class I: Sugar, Salt and Oils

Class II: Sodium benzoate, Potassium metabisulphite (K M S) and Sorbic acid

Food packaging serves to protect products throughout their journey from production to consumption. However, packaging is often exposed to a variety of hazards during transportation and storage that can compromise its effectiveness and, ultimately, the quality and safety of the food inside. Understanding these hazards is essential for designing packaging solutions that can withstand the physical, environmental, and atmospheric challenges encountered along the supply chain. This chapter examines the types of hazards that affect food packaging during transportation and storage, focusing on the ways in which these factors impact packaging integrity, food quality, and consumer safety. By exploring mechanical hazards, environmental influences, and atmospheric interactions, this chapter provides insights into the crucial role that resilient packaging plays in safeguarding food from production to point-of-sale.

The growing concern over the environmental impact of traditional packaging has led to increased interest in biodegradable and edible packaging solutions. These innovative approaches offer sustainable alternatives to conventional materials like plastic, which can persist in the environment for hundreds of years. Biodegradable packaging decomposes naturally, reducing pollution and landfill waste, while edible packaging provides an additional layer of sustainability by allowing consumers to eat the packaging along with the food) These solutions not only address waste management issues but also respond to changing consumer preferences for environmentally friendly products. This chapter explores the importance of sustainable packaging, the different types of biodegradable and edible materials available, and the challenges and future potential of these eco-friendly options.

Fundamentals of Nanotechnology in Packaging • Overview of Nanotechnology in Packaging: Nanotechnology in packaging refers to using materials manipulated at an extremely small scale (1-100 nanometers) to boost the performance and capabilities of packaging. Techniques like nanoparticles, nanofibers, and nanocomposites are integrated into packaging materials to improve their physical properties, prolong shelf life, and introduce new functions like antimicrobial features. Mechanisms and Key Materials • Nanoparticles: Small particles added to packaging to enhance strength, f lexibility, and barrier properties. Common types include silver, titanium dioxide, and zinc oxide nanoparticles. • Nanofibers: Made from substances such as chitosan, cellulose, or polymers, these fibers increase strength and are useful in active packaging coatings. • Nanoclays: Dispersed in polymers, these increase resistance to gases and moisture, enhancing barrier performance

Abstract

Tremendous changes in lifestyle, eating habits and shifting rural habitations are causing an irreversible change that is leading to manifold multiplication of health problems and these health issues have attracted the attention of every segment of the society in the recent past. Today foods are not intended to only satisfy hunger and to provide necessary nutrients for humans but also to prevent nutrition-related diseases and improve physical and mental well-being of the consumers. Due to increasing control over nutrition and health, consumers are becoming more proactive towards their health. In this regard, functional foods play an outstanding role and they are gaining public acceptance and there is great scope for value-added as well as health promoting food products in developing countries. Various terms have used for functional foods throughout the world such as designer foods, medicinal foods, nutraceuticals, therapeutic foods, superfoods, foodiceuticals, and medifoods. People are interested in foods which boost immune system, reduce the risk of diseases and improve health. The increasing demand of such foods can be explained by the increasing cost of healthcare, the steady increase in life expectancy, and the desire of older people for improved quality of their later years. Typically, a food marketed as functional contains added, technologically developed ingredients with a specific health benefit. These range of products cannot be truly classified as ‘food’ and a new hybrid term between nutrients and pharmaceuticals, ‘nutraceuticals’, has been coined to designate them. The development of functional foods involves the application of various food processing techniques such as microencapsulation of functional ingredients for controlled release, nanotechnology for the development of nanostructured (or nanotextured) food ingredients and delivery systems for nutrients and supplements etc. Inclusion of probiotic bacteria and probiotic supplements in various food systems has also become very popular and this is becoming a very vital sector in functional food market. Systematic RandD efforts are, therefore, required to develop health promoting foods for all segments of the society at affordable cost. Prior to promoting the developed health foods, it is of utmost importance to conduct clinical trials to ascertain safety and efficacy, and also establish appropriate regulatory framework for their distribution to masses. All these issues have been discussed in this paper and recommendations were drawn to formulate future research.

Pineapple [Ananas comosus (L.) Merr.] is an important commercial tropical fruit crop under the family Bromeliaceae. Centre of origin of this fruit can be traced back to Brazil, South America. It is eulogized as “Queen of Fruit” or “Friendship Fruit” or “Haven Fruit” or “Golden Queen”. The word ‘Pineapple’ came from the Spanish word “Pina” based on appearance of fruit which resembles a pine cone. Now, pineapple is termed as “Boon for dry land agriculture”. Pineapple is an introduced crop in India and was first introduced in Goa by Portuguese. The largest producer of pineapple is Thailand and India ranks 6th in the world pineapple production. In India, Tripura, Assam, West Bengal, Kerala are the leading pineapple producers. Pineapple is a CAM (Crassulacean Acid Metabolism), monocarpic (each stem flowers only once and dies after fruiting), herbaceous perennial plant (Baruwa, 2013) and is suitable for cultivation in xerophytic conditions (Baraily and Deb, 2018).

The earliest written references to pineapple are found in the reference of Christopher Columbus, Gonzalo Fernández de Oviedo y Valdés, and Sir Walter Raleigh. They found pineapple growing in the West Indies mainly for for food and wine making. The Portuguese sailors were responsible for early dissemination of the pineapple and introduced it to Saint Helena in 1502. They also carried it to Africa and India by about 1550. Cultivation of pineapple had spread over most of the tropical countries including some of the islands of the South Pacific before the end of the 16th century. Costa Rica, Brazil, China, India, and Thailand are now major growers of pineapple.

1. Introduction

The growing prevalence of obesity and obesity associated disorders as well as its impact on public health has received increased attention in recent years. As a result, obesity is now considered one of the world’s leading public health problems. A study published in the noted medical journal Lancet says India is just behind US and China in this global hazard list of top 10 countries with the highest number of obese people. The study - titled ‘Global, regional, and national prevalence of overweight and obesity in children and adults during 1980-2013: A systematic analysis for the Global Burden of Disease Study 2013’ - used data collected by international bodies and organizations in various countries like India over three decades. China and India together accounted for 15 per cent of the world’s obese population, with 46 million and 30 million obese people, respectively. According to the study, the number of overweight and obese people globally increased from 857 million in 1980 to 2. 1 billion in 2013. This is one-third of the world’s population.

With lifestyle disorders forcing more and more people to reel under excess body weight, even relatively younger people are developing joint disorders and knee pain. Excessive weight is associated with a series of health problems, including blood pressure, diabetes, and cardiovascular ailments. Therefore there in an urgent need to envision effective anti-obesity strategies through effective interventions.

INTRODUCTION

Vegetables and fruits have many similarities with respect to their composition, methods of cultivation and harvesting, storage properties and processing. In fact many vegetables are considered fruits in the true botanical sense. But the difference between the two is that vegetables are derived from various parts of plants e.g. roots, leaves, stems, buds and so on whereas, fruits are the mature ovaries of plants with their seeds. The edible position of most fruits is the freshly part of the pericap or vessel surrounding the seeds. The other difference between the two is that those plant items that are generally eaten with the main course of a meal are often considered to be vegetables, whereas those that are eaten alone or as a dessert are considered as fruits. This is the distinction made by food processors, certain marketing laws, and the consuming publics.

Introduction

Quality of fish is affected by various factors, which are classified into two categories: intrinsic factors and extrinsic factors. Intrinsic factors are the chemical and physical properties inherent to fish. Extrinsic factors are treatments given to fish before and after catch until it reaches the consumer, which includes the method of catch, cross contamination, processing, preservation, and product storage environment (temperature, humidity, packaging). The processing methods such as drying, smoking, chilling, and salting greatly help to minimize the spoilage. The quality of fish is also dependent on cold chain, in which the temperature is managed and monitored at every stage of production, transport, storage and sale.

2.1. Pre-Harvest Factors

Pre-harvest factors relates to the intrinsic factors affecting the quality of fish, as they are beyond the direct control of human. Various intrinsic factors affecting quality are fish species, size, sex, physiological state, parasites, naturally toxic fish, pollutants, and occasional peculiarities. Additionally, some of the extrinsic factors like method of catch and feeding interruption for starvation are also considered as pre-harvest factors affecting the quality of fish.

2.1.1. Species Characteristics

The quality of fish is related to species. For instance, flat fish keep better than round fish. Post-mortem pH varies between species. For example, long rigor period and low pH (5.4-5.6) of very large flatfish and halibut give relatively long iced storage life of 21 days, while mackerel with low post-mortem pH has no effect on shelf life. Some fish are rated as good quality as they are expensive, example, seer fish and pomfret. Fatty fish are rejected sensorial before lean fish due to the appearance of oxidative rancidity. So, lean fish keep longer than fatty fish under aerobic storage. Bony fish are edible longer than cartilaginous fish. Skin of fatty pelagic fish is very thin and contribute to faster

spoilage rate, as it allows enzymes and bacteria to penetrate more rapidly. Thick skin and slime of flatfish contribute for better keepability, as slime contains bacteriolytic enzymes, antibodies and other antibacterial substances.

Introduction

The risk assessment is gaining importance as the scientifically-based approach for the development of food safety and quality standards. It is a logical extension of HACCP revolution. In hazard analysis, first the hazards likely to occur in foods are identified, then an assessment is made of the severity of each hazard, and an evaluation is done of its likelihood to occur. Severity and likelihood are the two factors involved in risk assessment. Second, the increase in international trade has raised new safety and quality challenges. New approaches address the risk of cross-border transmission of infectious and hazardous agents with emerging food-borne diseases and quality problems. This has led to the development of a new safety and quality regulatory framework in 1995, the Sanitary and Phytosanitary (SPS) and the Technical Barriers to Trade (TBT) Agreements of the World Trade Organization (WTO). In these two Agreements, two provisions are of importance to fish safety and quality:

• National SPS and quality requirements should reflect standards agreed on in the international standards setting bodies i.e. Codex Alimentarius for food quality and safety.

• Domestic standards can be developed based on scientific risk assessment.

Risk assessment of microbiological hazards is identified as a priority area by the Codex Alimentarius Commission (CAC). In 1999, the Codex Committee on Food Hygiene (CCFH) in the 32nd session, identified a list of 21 pathogen commodity combinations that require expert risk assessment advice. FAO and WHO jointly launched a programme with the objective to provide an expert advice on risk assessment of microbiological hazards in foods to their member countries and to the CAC. Under which, expert groups are established to examine four priority pathogens: product pairings, e.g. Listeria monocytogenes in ready-to-eat food; Salmonella in eggs and broiler chickens; Campylobacter spp. in broiler chickens; and Vibrio spp. in seafoods. Risk assessment is therefore important throughout all aspects of the seafood industry - for companies, national governments and for international regulators.

Abstract

The increasing interest in polyphenolic compounds in industries has led to the exploration and exploitation of rich bio-compounds from natural sources, essentially plants and their by-products. Solid-liquid extraction is mostly applied for the recovery of these valuable compounds from plants. Since the extraction process is often difficult in a fresh matrix, a drying operation is needed to reduce the moisture content, and preserve the targeted valuable compounds. An uncontrolled drying operation will lead to product damage and hence, loss in quality, reason why, several studies have been carried out to understand and control the drying process. The present chapter aims to present some data on drying for bioactive compound recovery from plants and their by-products, mainly polyphenolic compounds. Our main interest is the mathematical tools used to model the drying process.