eChapters

1. Introduction

Pectin is a polysaccharide present in the middle lamella of plant cell walls. The firmness and structure of the plant tissue are attributed to the presence of pectin in the middle lamella. The insoluble form of pectin is called protopectin and the soluble form is called soluble pectin (Kertez, 1951). Protopectin is abundant in green fruits and contributes to hardness of cell, where as soluble pectin is responsible for viscous nature of juice and pulp. Conversion of protopectin to soluble pectin results in loosening of the bonds between the cells and softening of the fruit tissues. Protopectin is reported to be hydrolyzed to pectin by enzyme action during ripening. Protopectin on restricted hydrolysis yields pectin or pectinic acid. Braconnot (1825) discovered pectin as the gelatinous principle of fruits.

Introduction
 
Developments in innovative food packaging technologies have evolved in response to the need for protection of the food product containing bioactive component from both external and internal environments and in response to consumer expectations for health claims, convenience and product safety. Consumers around the world are willing to pay extra for guaranteed product freshness delivered by the type of packaging. Many new packaging developments have focused on extending the shelf life of the product and on delivering a higher quality product to the consumer. These developments would not be possible without significant advances in the materials used in packaging and the incorporation of various types of sensors into food packaging. This chapter outlines the innovative packaing solutions in the production of functional food.

Introduction
 
Cardiovascular disease (CVD) is still a major cause of death in Western populations and is becoming an important cause of morbidity and mortality worldwide. Thanks to advanced medical knowledge and treatments, many patients survive an initial event. Because of that, prevention of secondary CVD is a growing task for nutritionists and other health professionals. Cardiovascular risk can be reduced by lifestyle changes, one of which is diet. There is now substantial evidence from epidemiological and clinical studies that a diet rich in fruits, vegetables, unrefined grains, fish and low-fat dairy products, and low in saturated fats and sodium, can reduce the risk of coronary heart disease and hypertension.

Like other sectors of the economy food processing sector also suffers from certain constraints. The challenges for the food conservation, distribution and processing sectors are diverse and demanding, which need to be addressed to leverage the growth of agriculture and food processing sector. Following are the major challenges and strategies are suggested to overcome the challenges (Sakina, 2019).

6.1. Domestic Constraints in the Development of Food Processing Industry in India

Despite the significant economic potential of the FPI in India, it still faces massive domestic challenges, which include low level of processing, fragmented structure of the industry, consumer perception and lack of skilled manpower. Firstly, low level of processing means that at industrial level, less food is processed, as compared to household level. Most of the traditional food items like jams, jellies, pickles etc. are prepared at small manufacturing units or by households (Agarwal & Neogi, 2017).

Secondly, consumer perception with regard to processed food in India is not very optimistic and they consider that packaged food is not fresh, thus, leading to low consumption of processed food. Thirdly, food processing sector is still highly fragmented and unorganised. This led to the inefficacies in the sector and has failed to achieve the economies of scale (Agarwal & Neogi, 2017).

Abstract

It is well known that drying is an important unit operation in food processing industries, essentially used to extend the shelf life but also in making innovative processed products such as snacks with desired functionalities. Although drying of food products is carried out traditionally using several methods, the quality and energy aspects have been major focus of food drying research in the last decade or two. This is achieved by modifying and/or optimizing the existing drying systems, improving pre and post processing of the product, combination of more than one dryer type or developing altogether a new drying technique. There several dryer types which can give extremely good product quality, however, cost-effectiveness can be a major issue. It is necessary to balance both good product quality and minimum energy usage in order to sustain highly competitive market. This lecture will provide an overview of conventional drying methods used for foods, followed by some advances in these conventional methods and a discussion on some new drying techniques developed in recent years that are either commercialized or have potential of industrial use.

1.    Introduction

2.    Materials for Boat Construction

3.    Engines and Propellers

4.    Fuel Saving

5.    Development of Computer Aided Designing (CAD)

6.    Type and Size of Boats
    
    6.1    Trawlers
    6.2    Otter trawlers
    6.3    Side trawlers
    6.4    Stern trawlers
    6.5    Freezer trawlers
    6.6    Purse seiners
    6.7    Long liners
    
7.    Fishing Equipment
    
    7.1    Echo sounders and sonars
    7.2    Global positioning system (GPS)
    
8.    Global Maritime Distress and Safety System (GMDSS)
    
    8.1    Advantages of the GMDSS over the current system
    8.2    Implementation of the GMDSS requirements
    8.3    The main types of equipment used in GMDSS
    
9.    Distress Alert Transmitters (DAT)
    
10.    Automatic Identification System (AIS)
    
11.    Handling Equipments
    
    11.1    Advances in deck machinery
    11.2    Automated long line system
    11.3    Automated squid jigging machines
    11.4    Net haulers
    11.5    Net drums
    11.6    Gantries
    11.7    Stern ramp
    
12.    Side Thruster
    
13.    Satellites and Remote Sensing
    
14.    Vessel Monitoring System (VMS)
    
References

1. INTRODUCTION

India produces a large variety of fruits and vegetable due to varied agro-climatic conditions. These include mango, citrus, banana, apple grapes, strawberry, pineapple, litchi, guava, papaya, plum, peach, pear apricot etc. Astonishingly, it may appear but it is a fact that postharvest losses of fruits and vegetables in India are staggering. Infact the postharvest losses of fruits and vegetables are equivalent to the annual consumption of fruits and vegetables in U.K. In this article, a focus is made on the causes of postharvest losses of fruits, overview of various techniques used to prevent the postharvest losses constrains in postharvest technology and future strategies.

1. INTRODUCTION

Every fruit or vegetable is harvested keeping in view, its intended use. At what stage it should be harvested, is indicated by the maturity index. The chapter focuses on these and postharvest quality of fruits and vegetables.

2. FRUIT MATURITY

"Maturity of a fruit can be defined as that stage at which a commodity has reached a sufficient stage of development that after harvesting and postharvest handling, its quality will be at least the minimum acceptable to the ultimate consumer”. Maturity is of two types:

Abstract
 
Spray drying is used as one of the best alternatives for extracting essential constituents of fruit and vegetables. Spray drying of fruits and vegetable juice/purees, which is an excellent source of bio-functional properties into a solid phase helps to enhance their stability and controlled release in different food matrices. Spray drying along with different carrying agents helps to retain essential active compounds in fruits and vegetables. Spray drying is generally carried in three steps viz. atomization of liquid feed by suitable atomizer; drying of droplets with the help of hot air and motion of droplets. Carrier agents like maltodextrin, wax starch, Gum Arabic and microcrystalline cellulose are added to the feed to increase glass transition temperature. Chapter presents the effects of different operating parameters of spray drying as well as effects of carrier agents on the physicochemical and functional properties of spray dried fruit and vegetables powders.

1     Introduction

2     Bacterial Flora on Fish

3     Products of Bacterial Activity

4      Bacterial Flora of Fish Caught from Different Waters

5      Fish Spoilage and Bacterial Flora

6      Bacterial Contaminations
    
7      Bacterial Contamination of Harvested Fish
    
8      Growth of Spoilage Bacteria
    
9      Scombroid Poisoning
    
10      Microorganisms on Iced Fish
    10.1     Crustaceans
    10.2     Molluscs
    
References

Abstract

Dietary antioxidants can be found naturally in various fruits, vegetables and food products.Typically, antioxidant phytochemicals commonly found in food products are Vitamin C, Vitamin E, carotenoids, polyphenols, melanoidins and indoles. The main characteristic of an antioxidant is its ability to scavenge free radicals and form stable end product which inhibit the chain oxidative mechanisms that lead to degenerative diseases which are harmful to human health. Drying is widely used in food processing to minimize food wastage and to extend food shelf-life. Pretreatment, drying methods and storage conditions are some of the processing parameters affecting the quality of dried products. Selection of processing conditions and storage environment are therefore critical in maximizing the retention of food antioxidants. This chapter aims to compile and summarize studies carried out for antioxidants namely antioxidant contents in dried food products, effect of processing parameters and quantification methods in the analyses of antioxidants.

1. INTRODUCTION

Indians are known to prepare preserves from the ancient times. They were also familiar with ther therapeutic values associated with the preserves. Besides, candies, reathers and toffees are the other food products prepared and consumed. In this chapter, the methods of their preparation are described.

2. PRESERVES

A preserve is made from properly mature fruit, by cooking it whole or in the form of large pieces in heavy sugar syrup, till it becomes tender and transparent. In its preparation not less than 45Kg of the fruit are used for every 55Kg of sugar, and cooking is continued till a concentration of at least 68 per cent of TSS (Total Soluble Solids) is reached.

Freshly made preserves are wholesome and have an attractive appearance. When they are stored for a long period, their natural colour and flavour deteriorates on account of oxidative changes. They should therefore, be made only during the season, unless there should be adequate facilities to keep the fruits so that they are available in the off-season also.

1.    Introduction
    
2.    Bacteria of Public Health Significance in Fish Handling
    
3.    Sanitary and Hygienic Precautions to be Followed in Fish Handling
    3.1    Requirements for the fishing vessels
    
4.    Requirements for the Landing Sites/Auction Centres
    
5.    Requirements for the Processing Centres
    5.1     Use only potable water or clean sea water for washing fish
    5.2     Never put fish on sand or any unclean surface
    5.3     Lighting and ventilation
    5.4     Water supply
    5.5     Ice
    5.6     Utensils for fish handling
    5.7     Washing of utensils and fish contact surfaces
    5.8     Workers’ hygiene and health
    5.9     Rodent control measures
    5.10     Fly control measures
    5.11     Waste disposal
    5.12     Storage of toxic substances
    5.13     Toilet facilities
    
Acknowledgement
    
References

Introduction

Commonly available food materials especially dairy products, cereals and fruits are perishable and require processing for long term storage. The methods of food storage has been known from the pre historic times and was mostly based on processing the food into a more stable form with a longer shelf life. Such processes increases the time range of food availability and in many cases improves the taste thereby, cumulatively improving the food value. One of documented method of food preservation is by fermentation and is age old. Other commonly used methods include drying, refrigeration, salting and fermentation (Luck 1985, Paulus, 1985, Christensen et al., 2003, Martindale and Schiebel, 2017).

Flavour and appeal of food has been considered as one of the important factors contributing to the demand of the food. Originally the flavours were largely plant derived, current industrial practices largely utilise synthesis by chemical reactions and subsequent extraction to achieve a uniform quality (Weckerle et al., 2006, Davidovich-Rikanati et al., 2008, Sethupathy et al., 2018). These chemicals referred to as “flavourings” are defined as compounds that enhance the taste, appeal and palatability of food. They are naturally derived or artificially synthesised compounds. Considering that many artificially synthesised chemical flavours might affect the health adversely. Industrial food research has now shifted their focus on flavourings that are naturally available (Cohen et al., 2018). Such naturally occurring flavourings are referred to as bio-flavours (de Billerbeck 2015). The ease of producing bio active compounds from microbial culture extracts has played significant role in industrial food biotechnology (Verachtert et al., 2005).

Bottom or demersal trawling continues to be one of the most important fishing methods of the world. In India more than 35,230 trawlers of various sizes ranging from 9 to 30 m L_OA with engine power ranging from 45 to 495 hp @ 2000 rpm are in operation. Trawl is a bag net towed through water to filter out fishes, the mouth of which is kept open horizontally by means of a beam or otter boards and vertically by means of floats and sinkers. Horizontal mouth opening is also effected by dragging the net from two boats known as bull trawling or pair trawling. The principle of trawling is the movement of the net under water filtering the water through the mesh in the netting, without either permitting the fish to escape or gilling them (Fig. 1). Trawl net is fabricated using polyethylene netting after cutting and shaping the panels as per the design

Maintaining the quality of fish begins with harvest and carries through the harvest-to- consumption chain. Careful handling of fish and shellfish while harvesting and during transport to the processing plant is critical if the high quality of the product is to be maintained. There are, however, several constraints on handling the fish; the important among them are the bacteriological, chemical and physical processes that cause degradation of fish. The surface of dead fish is an ideal growth habitat for bacteria and the end result of such activity is spoiled fish. Reduction of temperature can prevent the growth of many bacteria that cause the spoilage. Chemical breakdown due to oxidative and enzymatic reactions can lead to off odours and flavours and rancidity. Digestive enzymes can initiate decomposition in the dead fish. Physical factors can enhance the bacteriological or chemical processes: bruising, tearing, cutting etc. can expose fish muscle to more rapid bacteriological growth, cause internal bleeding which darkens the fillets and expose greater surface area for chemical oxidation.

Since fish is a highly perishable item of food, it has to be immediately processed to various products to preserve the quality and to increase the shelf life. Fish requires proper handling and preservation to increase its shelf life and retain its quality and nutritional attributes. The objective of handling, processing and preservation is to control or reduce the spoilage process so that the final product is wholesome and safe for the consumer. Fish and fishery products brought to market in a well-preserved condition will generally command higher prices, both at wholesale and retail levels, and thus give better returns to the fishing operation.

Low temperature preservation by chilling and freezing methods are widely practiced to maintain the quality and freshness of fish and fish products. Chilled storage method, i.e., keeping the fish in the unfrozen condition has only limited shelf life and it will vary between 4 and 20 days depending on the condition and species of fish. In frozen storage also the shelf life is restricted but it varies from few weeks to years. The various factors that affect the frozen storage shelf lives are condition of fish at the time of catch, handling, processing and product development, packaging and glazing of the product, freezing method adopted, frozen storage temperature, stacking methods and transportation techniques. These factors can be put together and can be termed as ‘Product, Processing and Packaging’ (PPP) and ‘Time Temperature Tolerance’ factors (TTT).

1. INTRODUCTION

Fermentation is an age old technology. It has been used by man since antiquity. It has been employed to produce a number of fermented products such as wine, beer, curd, vinegar, pickles and several others. Fermentation was discovered quite early and by chance but the underlying principles were discovered very late. Primarly fermentation was used as a method of shelf-life extension of the produce in the time of glut production, though the final product had modified sensory qualities. Thus, fermentation and drying were the main methods of preservation. With the discovery of new methods of preservation, fermentation as a method of preservation has gone into background and as technique of flavour development and product with modified sensory quality came into practice. In this chapter, fermentation as a method of preservation has been described.

Introduction

Wine is a very unique fermented beverage. It was an essential part of various religious and cultural ceremonies in ancient civilizations; and continues to be considered as a ‘drink for elite’. The reason is that wine was considered as ‘Gift of God and ‘God’s nectar’ in religious text books, and medicinal value of the beverage is well supported by modern science. Wine is a beverage well tagged with its geographical origin. This concept originally comes from French concept of terroir; which explains that a varietal wine from a defined region possess distinctive qualities. Wine makers of the past enjoyed this definition of quality for better marketing opportunities. Today, globalization and advancement in wine science created empowered consumers who could clearly discriminate quality of wines. In addition to a product with high sensory qualities, consumers expect a healthful beverage produced in an environmentally sustainable manner. Enology research projects focus on such aspects; and this chapter is a glance on enology advancements and proven health benefits of wine, such as cardiovascular health gut health, dental health etc.

HACCP: The Hazard Analysis and Critical Control Points (HACCP) is a scientific, rational and systematic approach to identify, assess and control hazards during production, processing, manufacturing and use of food. It ensures safety of the food. HACCP presents a good opportunity for the food industry for upgrading quality and bringing uniformity and consistency in their supplies to international market. or It is a systematic preventive approach to food safety that addresses physical, chemical and biological hazards as a mean of prevention rather than finished product inspection. It involves identification, evaluation and control of hazards which are significant for food safety.

HACCP plan: A document prepared in accordance with the principles of HACCP to ensure control of hazards which are significant for food safety throughout the food chain under consideration.

Haemagglutinins: A group of proteins of plants that are not antibodies and do not originate in an immune system but bind specifically to carbohydrate containing receptors on cell surfaces (red blood cells). It is also known as Phytoagglutins / lectins.

Food packaging protects products from physical, chemical, biological and environmental influences while helping to maintain safety, freshness and quality. Advanced packaging systems perform functions beyond simple containment by regulating gases, moisture, temperature and microbial activity. The chapter examines modified-atmosphere, controlled-atmosphere and vacuum packaging, together with active and intelligent systems. Time-temperature indicators, freshness indicators and biosensors enable real-time monitoring of product condition. Edible and biodegradable materials provide more sustainable alternatives to conventional packaging, while nanotechnology can improve mechanical, barrier and antimicrobial performance. Shelf-life modelling and hurdle technology are also considered as tools for designing integrated packaging systems suited to specific foods and storage conditions.