eChapters

Maturity at harvest is the most important determinant of storage life and final fruit quality. Maturity indices are determined for many fruit, vegetable and floral crops. Harvesting crops at proper maturity allows handlers to begin their work with the best possible quality produce. Produce harvested too early may lack flavour and may not ripen properly, while produce harvested too late may be fibrous or over ripe.
 
Almost all fruits reach their best eating quality when allowed to ripen on the tree or plant (exceptions e.g., pears, avocados, and bananas). In general, fruits become sweeter, more colourful, and softer as they mature. A few fruits are usually picked mature but unripe so that they withstand post harvest handling system when shipped long distances.  Most of  currently used maturity evaluation is based on a compromise between those methods that would ensure the best eating quality and those that provide flexibility in transportation and marketing.  Optimum harvesting stage depends upon type of fruit or vegetable and their final use. Such a division is usually based on their classification according to physiology, environmental conditions, ripening bahaviour and nutritional aspect. Some of the classifications, important for their harvesting and storage are briefed in  subsequent sections.

Physiological Development

Fruits and vegetables can be divided into 3 stages based n their physiological development i.e. growth, maturation and senescence.

Growth: This generally refers to cell division, enlargement and differentiation ultimately giving a particular size, weight and volume to the commodity.

Maturation: It is initiated before the ceasation of growth and lasts till the onset of senescence.

Senescence: The stage when anabolic (synthetic) processes almost terminate and catabolic (degradative) processes are initiated and speeded up causing ageing and finally death of tissues.

Ripening: Stage that begins with the last stages of maturation and lasts till the beginning (first stage) of senescence. Ripening is a very important event in the life of a plant as it transforms a physiologically mature but inedible (or not preferred to be eaten) plant part into an edible, visually and olfactorily attractive and tasty commodity. Ripening marks the completion of developmental phase and is an irrevessible event.

Maturity

It is derived from Latin word ‘Maturus’ which means ripen. It is that stage of fruit development, which ensures attainment of maximum edible quality at the completion of ripening process.

Maturation

It is the developmental process by which the fruit attains maturity. It is the transient phase of development from near completion of physical growth to attainment of physiological maturity. There are different stages of maturation e.g. immature, mature, optimally mature, over mature.

Maturity Indices

The factors for determining the harvesting of horticulture commodities according to consumer purpose and type of commodity.

Maturity Indices is two type

1. MATURITY INDICES

Maturity indices (right time of harvesting) are quality factors that give clues as to when a product should be harvested to allow marketing flexibility and ensure the attainment of minimum acceptable quality to the user. It also refers to the set of criteria used to determine the stage of maturity for harvesting the horticultural crops. Commodities harvested either pre-mature or too late are more susceptible to postharvest physiological disorders, diseases and have poor shelf life than harvested at right stage of maturity. The pickers/ handlers are trained in methods of identifying produce that is ready for harvest. However, optimum harvesting stages depends upon type of produce and their final use. Horticultural crops may be harvested at two main maturity levels i.e., physiological maturity and commercial or horticultural maturity. Therefore, the proper stage/maturity indices for harvesting of all horticultural crops should be identified for their implementation during harvesting. Horticultural maturity in relation to developmental stages of the plants is depicted in Fig 3.1.

Horticulture crops contribute significantly for the total agricultural production and productivity. World production of fruits accounted for the total volume of 933 million tonnes (FAO, 2023). India being second largest producer for majority of fruit commodities had a production total reaching 108.34 million tonnes in 2022-2023 from an area of 7.15 million hectares. It accounts for 33 per cent to the agriculture GVA (Gross Value Added) and plays an important role in the Indian economy. India is second largest producer of majority of fruits and vegetables. Diverse agro-climatic zones in the country make it possible to grow almost all varieties of fruits in India. Produced fruits are used for domestic consumption, processing and export purposes. During 2022 23, fresh fruits exports was valued at 6219.46 crores (APEDA, 2023). The fruits grown in India includes domestic fruits and nuts along with the exotic fruits contributing for the food and nutritional security. The growth of these economically important fruits provides scope for maintaining rich germplasm, enhance bio-diversity and maintain ecological balance.

Introduction

Measurement of pH of a solution and preparation of different types/strength of buffers are common practices in a laboratory, particularly in the Biochemistry and Molecular Biology laboratories. Therefore, in this chapter you will be acquainted with the procedures of measuring pH of a solution as well as preparation of some of the commonly used buffers in a laboratory.

Potential or Power of Hydrogen Ion (pH)

Measurement of pH of a solution is measuring the molar concentration of hydrogen ion [H+] in the solution, which is an indication of the acidity or basicity of the solution. The symbol pH stands for “power of hydrogen” and numerical value for pH is just the negative logarithm of the molar concentration of hydrogen ions [H+]. The ionic product of water (Kw ) is the basis for the pH scale. The total hydrogen ion concentration from all the sources and it can be experimentally measured.

The pH scale designates the concentration of H+ (and thus of OH−) in an aqueous solution, which ranges between 1.0 M H+ and 1.0 M OH−. The term pH is defined by the expression

Thus, the ionic product of water makes it possible to calculate the concentration of H+, with given concentration of OH−, and vice versa. The value of 7 for pH of a neutral solution is not an arbitrarily chosen figure; it is derived from the absolute value of the ionic product of water. A solution having pH greater than 7 is basic, and the concentration of OH− is greater than that of H+. A solution having a pH less than 7 is acidic.

Meat and Meat Products

    1.    Meat can be defined as “the muscle tissue of slaughter animals”.
    2.    meat is composed of water, fat, protein, minerals and a small proportion of carbohydrate

6.1 Introduction

The food industry produces large volumes of waste both solid and liquid, starting from the initial step of raw material to the final consumption of processed food. Apart from a loss of valuable biomass and nutrients, the generated waste poses increased disposal and potentially severe pollution problems. Meat and meat industry is no exception where slaughter houses, meat processors, wholesalers and rendering plant generates huge amount of waste [1, 2].

Meat and meat processing industry, is among the least profitable industries despite its immense size and large gross sales. Effective recovery and utilization of by-products and wastes is the lifeline of meat and poultry processing industry. Thus, it becomes imperative that an effort be made to reduce expenses by employing the use of new or modified processing methods and through in-plant treatment, where waste effluents and by-products could be recovered and often upgraded to useful products of higher value. Meat processing wastes have a potential for recycling raw materials or for conversion into useful products of higher value as by-product or even as raw material for other industries or for use as food or feed after biological treatment.

Abstract

The interest in the utilization of industrial by-products is increasing day by day and is major reason for exploring different meat, poultry and fish industry waste and optimization of extracting conditions of different valuable compounds. Utilization of these by-products in effective manner can be positive for meat industry economy as well as environmental pollution of the country. Besides the potential revenue losses, non-utilized or underutilized by-products accounts for the extra cost for their disposal. Meat producers are converting these by-products into value added edible and inedible form. Among the most prominent current uses of meat, poultry and fish waste are food ingredients, water treatment, cosmetic and personal care products, biogas/biodiesel, biomedical and pharmaceutical application. Several studies have dealt with the production of several value-added products such as gelatin, collagen, enzymes, specific proteins, bioactive peptides, chitin, chitosan, and pigments fro m the meat industries waste. Recently, in the food and pharmaceutical industry, an increasing number of new applications have been found for products generated from meat, poultry and fish industry waste; in different products as foaming agents, emulsifiers, biodegradable film-forming materials, colloid stabilizers, and microencapsulating agents, in line with the growing trend to replace synthetic agents with more natural ones.

INTRODUCTION

Meat is the flesh of animals that is used for food and consists of muscle, fat and bone. If the muscle which is commonly known as the lean meat, is examined under the microscope, it is seen to be made up of bundles of fibers held together by a thin membrane called connective tissue. Further study reveals that these fibers are in readily hollow tubes that vary in length in different animals and in different muscles in the same animals that are filled with a fluid, sometimes called muscle juice, which is known to contain protein, minerals and extractives. The forms of protein in the muscles are myosin (a globulin) and myogen (an albumen) and in addition, on red meats, hemoglobin.

A large number of people in developing countries have traditionally depends on products derived from plants, especially from forests, for curing human and livestock ailments. Additionally, several aromatic plants are popular for domestic and commercial uses. Collectively they are called medicinal and aromatic plants (MAPs). About 12.5% of the 4,22,000 plant species documented worldwide are reported to have medicinal values. With dwindling supplies from natural sources and increasing global demand, the medicinal and aromatic plants, will need to be cultivated to ensure their regular supply for processing and value added products.

The term “Medicinal and Aromatic plants” generally denotes those non-aromatic and aromatic plants, which are used for medicinal, perfumery, dye and cosmetic purposes. They are rich in secondary metabolites and are potential sources of drugs. Generally the whole plant roots, stem, bark, leaves, flowers, fruits, gums and oleoresins, etc. are used.

India has been considered as treasure house of valuable medicinal and aromatic plant species. Ministry of Environment and Forests have identified and documented over 9500 plant species considering their importance in the pharmaceutical industry. In the present context of ‘back to nature’ in health care, it is relevant that these valuable plant species are not only preserved but also their cultivation developed in order to meet the entire demand of the domestic industries as also to exploit the bright prospect for export. Shift from collection to cultivation of medicinal & aromatic plants will also ensure purity, authenticity and sustainable supply of raw materials required for herbal drugs, including polyherbals.

1. Introduction

Pulpy and juicy fruits like orange, guava, banana, grape, mango, papaya, pears, apples and jackfruit can be converted into fruit products like squashes, juices, cordials and ready-to-serve (RTS) fruit beverages. These RTS fruit beverages are both refreshing and thirst quenching and have become very popular. Liquid fruits are the clarified juices prepared from these pulpy and juicy fruits. There is a demand for liquid fruits in the international market for various applications. The liquid fruits can be used as a natural alternative to synthetic beverages. They can be suitably concentrated or diluted, blended with other juices and also can be carbonated as fruit based soft drinks. Removals of pulpy material from the juices make them easier to preserve by pasteurization and are amenable to carbonation. Pulpy fruits can be successfully processed into liquid fruits (clarified juices) by using pectic enzymes. The emphasis of the fruit juice processing industry has, so far, been mainly on conventional clarification processes like enzymatic and chemical treatments followed by filtration using filter aids; and concentration by vacuum evaporation.

1. Introduction

Membranes separation processes have gained widespread applications in food industry. High selectivity of membrane has been exploited for separating a particular component from complex liquid food mixture and for controlled release of active ingredients like preservatives or flavor compounds. Today, a number of chemical processes utilizing the unique properties of membrane have been developed for commercial application in food industry with specific advantage of low energy requirement. Membrane separation/molecular sieving is one among those food engineering principals which has found broad range of applications including concentration of heat labile compounds, recovery of solvent, downstream processing, flavor volatile recovery, deacidification, desalination, waste water treatment etc

Introduction

Since 1990, there has been a lot of interest in functional foods and nutraceuticals, particularly because of their impact effects on human health and the prevention of certain diseases. Apart from growing good quality natural products, there are challenges in extracting, refining, analyzing active ingredients, and evaluating safety before an effective, reliable product is made [1,2]. Special attention needs to be focused on separation and purification mainly because 40-80% of the cost of production is assigned to separation and purification unit operations in making functional foods and nutraceuticals. There are also several carotenoids and polyphenol products that have been identified from various plants and a single plant could contain highly complex profiles of these compounds. These are labile to heat, air, and light, and they may exist at low concentrations in the plants. This makes the separation and detection of nutraceuticals a challenging task. The membrane techniques used for the separation of nutraceuticals from the natural products, as well as their applications and influencing factors are discussed in this chapter [3, 4].

4.1. Introduction

Packaging of materials protects, surrounds, and contains food products. It is necessary from processing and manufacturing stage till the final consumption through storage and handling. In 1804, Nicolas Appert, a French confectioner, discovered a method of “conserving all kinds of food substances in containers.” In 1810, the Ministry of the Interior’s Bureau of Arts and Manufactures paid Appert an ex-gratia payment of 12,000 francs on the condition that he publish the details of his process. Appert avoided the use of tinplate in his study. However, in the early nineteenth century (1810), Phillipe de Girard, a French inventor, filed a patent referring to the replacement of glass jars and bottles with tin cases. The official confirmation in the New York Evening Post on July 18, 1822 by Daggett and Kensett is thought to be America’s first offering of preserved provisions in tin cans (Bishop, 1978). Table 1 shows the evolution of metal packaging materials at various stages.

Introduction

Hippocrate, an ancient physician, a great thinker and also often referred as father of medicine, for the first time conceive the idea nearly 2,500 years ago that a disease is caused due to natural factors such as environmental factors, diet, and living habits. He advocated the secret of healthy living in healthy food in his famous quote “Let food be thy medicine and medicine be thy food”. But unfortunately, this wisdom about food has faded with the time and we became dependent on synthetic medicines and drugs for even life style disorders. In the last century, research advancement in the field of food science and nutrition established food not only as a source of nutrition but also a source of active food components that aid specific functions and rejuvenated the Hippocrates concept. According to the Department of Health and Human Services, USA, daily diet of a person, plays a crucial role in 5 of 10 diseases which are the leading causes of death, such as diabetes (noninsulin dependent or type 2), stroke, coronary heart disease (CHD), specific type of cancer, and atherosclerosis. In the mid-1980s, term “functional food” was introduce in Japan and defined as food that contain active components either from plant or animal origin and provide physiological benefits in addition to the basic nutritional needs.

1. INTRODUCTION

Flavour is a distinctive property of a substance affecting the gustatory sense. It may be defined as “The sum of those characteristics of any material taken in the mouth, perceived principally by the senses of taste and smell, and interpreted by the brain.” Flavour perception is a complex process which requires the particles to be mixed with saliva and salivary enzymes to promote the release of flavour. Flavour molecules are very diverse in nature. More than 5000 compounds in food have been identified as flavour components which can be detected at very low concentration and are thus, used in products at very low levels. Hexenols and hexenals, characteristic of green taste of fresh fruits and vegetables, can be perceived at a concentration of about 1 part per million (ppm). Naturally occuring flavour compounds are present at a very low concentration ranging from parts per trillions (ppt) to parts per millions (ppm) level. Majority of these compounds are volatile, with boiling points in the range of 20-300 °C. Most of these compounds are lipophilic and possess a great diversity of chemical group and structure with molecular weight ranging between 50-250 g/mol.

Flavour and fragrance compounds are a part of expanding industry with an estimated cost of nearly $27 billion. These comprise of diverse molecules with unique structures and functional groups that contribute to varied aroma and flavour, ranging from floral to fruity notes. The processing operations modify the equilibrium between the different components in raw food that might weaken the original flavour, which require subsequent supplementation. These flavour supplements can be natural or chemically synthesized. Of all the available flavour compounds, around 80% are produced by chemical synthesis whose use is limited due to formation of racemic mixtures and lack of substrate specificity. The growing awareness of consumers towards chemicals supplemented to food has led to the development of the flavouring compounds of biological origin referred to as natural flavours or bioflavours. The first major source of flavour compounds was primarily from plants. Identification of microbes producing vital food flavourants paved the way for alternative low cost, efficient and flexible method for the commercial production of flavour compounds.

The planet earth harbors a total population of 7,530,687,482 (as on 7^th September 2017 at 1345hrs) in which Asia and Africa share 4,486,207,286 and 1,252,251,830, respectively. In majority of the countries in Asia and Africa surveillance programs for detection and source tracking of human health hazard bacteria in foods is scant and in some cases do not exist. Hence, the task is much more complicated especially catering to needs of food, nutritional security and microbial safety of foods of more than 5,738,459,116 or 76.2 % of the total population of the world. The continued occurrence of foodborne illness is not evidence of the failure of our food safety system. In fact, many of our prevention and control efforts have been and continue to be highly effective. In advanced countries like US where food supply is one of the safest in the world, however, significant food borne illness continues do occur. Despite great strides in the area of microbiological food safety, much remains to be done.

Food-borne disease outbreaks are defined as the occurrence of 2 or more cases of a similar illness resulting from ingestion of a common food or observed number of cases of a particular disease exceeds the expected number. These can be confirmed (when at least one causal agent is identified) or suspected (based on clinical and epidemiological information). Although most cases are sporadic, these diseases draw attention to themselves due to outbreaks, thorough investigation of which can help in identifying control measures.Annual burden of foodborne diseases in the WHO South- East Asia Region includes more than: 150 million illness, 175 000 deaths, 12 million DALYs (Source: FERG Report 2010).