eChapters

Preserves (Murabbas) are prepared from whole fruits and vegetables or their segments by addition of sugar followed by evaporation to a point where microbial spoilage cannot occur. The final soluble solids concentration is reached to about 70 per cent. The finished product can be stored with or without hermetic sealing and refrigeration.

Abstract

Food proteins are among the commonly used ingredients by food manufacturers to produce different products with desired characteristics. Due to several nutritional and functional properties, proteins have different functions in various food products in addition to their role in metabolic system of the human body. Dilute or concentrated solutions of pure proteins or unprocessed food products which are rich in protein are very sensitive to deterioration or degradation by microorganisms and thus have short shelf life at ambient temperatures due to their highly moist structure and high protein content. Drying is one of the best methods that can guarantee preservation, a longer shelf life, chemical or thermal stabilization and resistance against other stresses. A full understanding of stresses encountered during drying is needed to choose an appropriate drying process and to optimize this process for maximum product quality. A number of methods have been used by various researchers to dry protein-containing foods. Among these methods, freeze drying and spray drying are the most common techniques. Sun drying, convective hot air drying, vacuum drying, heat pump drying, radio frequency drying as well as combined or hybrid drying methods with two or more of the drying methods have also been developed.

Abstract

Application of solar energy for drying of agricultural food products is one of the most attractive and cost-effective drying techniques. However, the intermittent nature of the solar energy is one of the major shortcomings of the solar drying system that can be alleviated by storing excess energy during the peak time and using it in off sun hours or when the direct availability of solar energy is inadequate. The use of sensible and latent heat storage systems in solar dryer is an effective way of storing thermal energy for drying purpose. This chapter will present information on different thermal energy storage (TES) materials, their advantages and disadvantages. The information available in the literature regarding the studies conducted on TES assisted solar drying systems is also covered in this chapter. In addition, some of the models that have been used by different researchers to test the performance of different TES materials are also reviewed.

Abstract

Drying remained at the centre stage since the initiation of the food processing due to its promise to preserve agricultural products economically and add functionality to a food product unlike other thermal as well as non-thermal food processing operations. However, many existing drying techniques have their own limitations like nutrient loss, damage of the organoleptic quality, high cost etc. Therefore, research for better drying technologies is going on. Supercritical drying (SCD) is one such technology which utilizes higher dissolving power of super critical fluids (SCFs) to dry food products. The current chapter illustrates the mechanism of SCD as well as current state-of-art and promise of the drying technology. Also, some modelling approach of SCD has been included in the discussion to facilitate new designs and optimization of SCD for various food products.

Abstract
 
Spray drying is used as one of the best alternatives for extracting essential constituents of fruit and vegetables. Spray drying of fruits and vegetable juice/purees, which is an excellent source of bio-functional properties into a solid phase helps to enhance their stability and controlled release in different food matrices. Spray drying along with different carrying agents helps to retain essential active compounds in fruits and vegetables. Spray drying is generally carried in three steps viz. atomization of liquid feed by suitable atomizer; drying of droplets with the help of hot air and motion of droplets. Carrier agents like maltodextrin, wax starch, Gum Arabic and microcrystalline cellulose are added to the feed to increase glass transition temperature. Chapter presents the effects of different operating parameters of spray drying as well as effects of carrier agents on the physicochemical and functional properties of spray dried fruit and vegetables powders.

‘Prunes’ is prepared from peach.

Arrak” liquor is prepared from date palm.

Hayane” variety of date palm suitable for juice making.

Kanji” is made from black carrot.

Kirschwascer” a wine prepared from cherry.

Shahi” variety of Litchi suitable for canning.

I. POST HARVEST DISEASES

A. Post-Harvest Diseases of Fruits

1. TERMS RELATED WITH BROWNING

1. EXPERIMENT 1 : INDUSTRIAL USES OF IMPORTANT CHEMICALS

Abstract

Dietary antioxidants can be found naturally in various fruits, vegetables and food products.Typically, antioxidant phytochemicals commonly found in food products are Vitamin C, Vitamin E, carotenoids, polyphenols, melanoidins and indoles. The main characteristic of an antioxidant is its ability to scavenge free radicals and form stable end product which inhibit the chain oxidative mechanisms that lead to degenerative diseases which are harmful to human health. Drying is widely used in food processing to minimize food wastage and to extend food shelf-life. Pretreatment, drying methods and storage conditions are some of the processing parameters affecting the quality of dried products. Selection of processing conditions and storage environment are therefore critical in maximizing the retention of food antioxidants. This chapter aims to compile and summarize studies carried out for antioxidants namely antioxidant contents in dried food products, effect of processing parameters and quantification methods in the analyses of antioxidants.

Abstract

Water, the most important component of common foods, is considered to be desirable as well as undesirable in the different food systems. Water-solid interaction in food systems controls various biological, biochemical and biophysical reactions affecting their acceptability. The retention or release of water from solid has been quantified in the terms of sorption isotherm. Sorption isotherm techniques have been used to characterize and identify the type of water-solid interaction in different food products. Sorption isotherm provides various information useful in designing and optimization of drying, storage, packaging, predicting quality and shelf life of the product.

Abstract

Most dryers operate at low thermal efficiency. The development of models and control systems offers an opportunity to improve dryer operation and efficiency. Dryer control is very important and with deeper understanding of the drying concept, new “smart” dryers can be made more reliable and more cost-effective than classical dryers. This chapter will provide an overview of necessity of control and safety measure in food drying system, and terminology related with drying control system. Different control strategy includes conventional and advanced techniques implemented in drying operation are reviewed  here and simple outline of intelligence control system in drying technology are briefly described in succeeding section. Various hazards in drying process and risk and safety management will also be discussed.

Abstract

Packaging plays an important role in the food processing Industry. It makes food more convenient as well as gives the food greater safety assurance from microorganisms, biological and chemical changes such that the packed foods can have longer shelf life. In order to meet the huge demand of processed food with longer shelf life, various methods of preservation and packaging are being used in the food processing industry. Drying and dehydration is one of the method which helps preservation of a perishable commodity against deterioration or spoilage.

Abstract

By loosely inspiring the actions of neurons in the human brain, artificial neural networks (ANNs) are widely accepted as a powerful nonlinear adaptive approach to tackle complex, dynamic, highly nonlinear, and ill-defined problems in an increasing number of fields of food industry.They have been used extensively in food drying to solve problems of nonlinear function approximation, pattern recognition, data description, optimization, simulation, pattern recognition, control, data sorting, clustering, and noise reduction, due to their massively parallel structure and capability to learn from examples. In this chapter, after providing a brief description of ANN technology and its principles as well as the structure of the most commonly employed ANNs in this context, an example is given to explain how the ANN technique is used for modeling and controlling food drying process. Generally, modeling, prediction, and optimization of heat and mass transfer, thermodynamic performance indicators, and quality parameters as well as physico-chemical attributes of dried foods are the most popular subjects to attract researchers’ attention to apply the ANNs in food drying industry.

Maturity Standards and Harvesting Indices

Harvesting : Harvesting is detaching a commodity from the point of its origin. This point of origin may be an above ground plant part i.e. shoot eg. apple, tomato etc. or an underground plant part eg potato, carrot, etc. or in water i.e. harvesting of fish from a pond (not to be covered in this book).

Storage : It can be defined as keeping the commodity fresh or processed in safe condition with minimum of deteriorative changes for later use.

Reasons of Deterioration During Storage

Essentials for Quality Product Preparation

Plant ripened red tomatoes should be selected. Yellow and green fruits on processing yield dull colour and turn brown due to oxidation.

Never use iron equipment for processing. Lycopene oxidizes and turns brown when comes in contact with iron. It also forms black compounds with the tannins present in tomatoes or the spices which are used for product preparation.

Avoid prolonged heating and cool immediately to avoid over-cooking.

Abstract

Inspired by the human eye to brain assessment process, computer vision technology has demonstrated its potential for monitoring and controlling of several operations in food industry. Computer vision technology is, therefore, applied extensively in food drying process for monitoring nutritional value and sensorial characteristics because of its promising characteristics such as reliable objectivity and repeatability. In this chapter, after providing a brief explanation of the computer vision technology and its prerequisites and principles, an example is given to elucidate how this technology is used for monitoring the visual attributes of foodstuffs during drying process. Overall, monitoring the visual properties of food products like size, shape, color, and texture in off-line mode are the most popular issues to fascinate researchers’ attention to apply the computer vision technology in food drying. Nevertheless, industrial applications of the computer vision technology for real-time monitoring and control of food drying facilities as final goals of its introduction in food drying industry seem to be limited. For future studies, it is suggested to apply this unique technology along with advanced soft computing methodologies for in-line monitoring and control of food drying process in order to achieve high quality dried products. Finally, outlooks and potential employment of this technology in food drying domain are discussed as well.

SYNOPSIS

Food is an essential element without which human being cannot survive. We need it for our maintenance and growth everyday and through the longevity of our life. As we understand food, it is a bunch of essential elements which is essentially needed for the engine of human body to run non-stop. The understanding of food is much required by masses who consume it every day. The present paper attempts to describe the knowledge on food, feeling on food by consumers, prevailing food, hunger and malnutrition, healthy food and studies required on consumable foods.