eChapters

The current world population of 7.6 billion is expected to reach 8.6 billion in 2030, 9.8 billion in 2050 and 11.2 billion in 2100, according to United Nations (UN). With roughly 83 million people being added to the world’s population every year, the upward trend in population size is expected to continue, even assuming that fertility levels will continue to decline (UN, 2017). This means there will be an extra billion people to feed within the next decade. Continuing population and consumption growth will mean that the global demand for food will increase for at least another 50 years .The future’s food systems need to be resource efficient and sustainable. It is quite clear that the only way to grow more food is to increase the yield while saving the environment from further degradation. It is not just food, it is the four F’s – Food, Feed, Fiber and Fuel. Digitization has increased in importance for the agricultural sector and is described through concepts like Smart Farming (SF), Precision Farming (PF) and Precision Agriculture (PA).The only way to get higher yield from limited resources is by changing agriculture into what we call Precision Agriculture, Climate Smart Agriculture, or as I prefer to call it Water-Smart Agriculture”

Precision farming manages spatial and temporal variability within fields through targeted, data-driven interventions. Onion is particularly suited to precision management because its productivity and quality are sensitive to moisture, nutrients, environmental stress, pests and diseases. This chapter describes applications of GIS, GPS, variable-rate technology, IoT, cloud platforms, drones, remote sensing, multispectral imaging, smart sensors, artificial intelligence, automated systems and crop-response models. These technologies support soil assessment, field preparation, irrigation, fertilization, crop monitoring, stress detection, protection, yield estimation, harvesting and storage. Their potential to reduce input waste and improve profitability is considered alongside constraints involving investment costs, technical knowledge, connectivity, accessibility and data privacy.

Cordial is a sparkling, clear, sweetened fruit juice beverage from which pulp/ fibrous material has been removed completely. It contains at least 25% fruit juice, 30% total soluble solids (TSS), 1.5% acid and 350 ppm sulphur dioxide. Lemon and lime are the most suitable fruits for making cordial.
Recipe: The recipe for the preparation of cordial as a general guideline is as under:
Extract the juice from lime or lemon as in squash and store in glass bottles after adding potassium metabisulphite @ 1.0 g/kg of the juice. Allow the juice to settle for a month. Decant the clear juice without disturbing sediments and strain it through a fine muslin cloth. Prepare syrup by mixing sugar with water, boil, strain and allow to cool. On cooling, mix juice in syrup and strain the cordial through muslin cloth if necessary. Add KMS and fill into bottles. Stor in a cool and dry place.

Fruit nectar is a type of fruit beverage that contains not less than 20% fruit juice or pulp, not less than 15o B total soluble solids and acidity ranging between
0.3-0.5 % but not exceeding 1.5%/. For orange and pineapple nectar, the fruit juice shall not be less than 40%. The product is preserved by heat processing/ thermal processing, as such no chemical preservative is permitted in nectars. Unlike squashes, fruit nectar is served chilled as such without any dilution.
Mango, guava, pineapple, papaya, jamun etc., are the most suitable fruits for making nectar.
Recipe: As a general guideline, the following recipe is used for the preparation of fruit nectar:
Procedure
i. Select fully mature and ripe fruit and extract pulp as discussed under fruit pulp making but do not add any chemical preservative.

Fruit pulps are semi-finished products that are used for manufacturing finished value-added products like jam, ready-to-serve beverages, squash, appetizers etc. According to Food Laws, pulp refers to an unfermented but fermentable product, pulpy, turbid or clear, obtained by a mechanical process from sound ripe fruits/vegetables. These are preserved either by heat processing or by using chemical preservatives. The maximum preservative permitted under Indian Food Laws is 1000 ppm sulphur dioxide added in the form of potassium metabisulphite.
Mango, guava, apple, pineapple, papaya, bael, guava, peach, plum, apricot etc., are the most suitable fruits for making pulp for use in finished product preparation.
Procedure
i. Select fully mature and ripe fruit like mango, guava, apple, peach, apricot, kiwi, etc., and wash thoroughly.

Jam is prepared by boiling the fruit pulp with a sufficient quantity of sugar to a thick consistency, firm enough to hold fruit tissues in position. For the preparation of jam, not less than 45 parts of fruits are used for every 55 parts of sugar. The jam prepared by using two or more fruit pulps is called mixed fruit jam. Apple jam, apricot jam, mango jam, guava jam, pineapple jam, and mixed fruit jam prepared by using the pulp of two or more fruits are quite common. According to Food Safety & Standards Regulations,2011 the minimum TSS in the Jam shall not be less than 65%(w/w). Earlier the minimum limit was 68% (w/w)
Raw material, ingredients and utensils required
1. Fruits like mangoes, guava, apples, apricots, plum, peaches and kiwi etc singly or in combination
2. Stainless steel knives, de-corers, ladle, utensils for cooking and mixing, glass bottles (Jars), LPG or Diesel Bhatti, bucket/tub for washing, Stainless steel sieve, Steam Jacketted Kettle, Boiler (for the commercial unit) etc. 

Ready -to -Serve (RTS) drink is a type of fruit beverage that contains at least 10% fruit juice/pulp and 10o Brix total soluble solids with acidity ranging between 0.3-0.5%. The product is not diluted before serving like squash; hence it is called a ready-to-serve beverage. The product can be preserved by using 70 ppm SO2  or 120 ppm benzoic acid. Mango, orange, guava, lemon, lime, litchi, kiwi fruit, apricot, pineapple, etc., fruits are used for making RTS beverages. For lime & lemon drinks minimum level of juice content is 5% as per Indian Food Laws.
Recipe: As a general guideline, the following recipe is used for the preparation of ready-to-serve drinks:
Procedure
i. Select fully mature and ripe fruit like mango, guava, apricot, kiwi, etc., and wash thoroughly.
ii. Some fruits like mango, kiwi, pineapple, and litchi are peeled before heating. Apricots, guava, plums etc are not peeled. Place fruit after peeling in a pan/pressure cooker and boil till softening

Squash is a type of fruit beverage containing at least 25% fruit juice/pulp, not less than 40% total soluble solids (TSS), about 1-1.5% acid and not exceeding 350ppm sulphur dioxide or 600ppm sodium benzoate. Squash is diluted by adding cold/chilled water before serving (1:3).
Mango, orange, lemon, lime, litchi, guava, pineapple, jamun, plum, apricot, rhododendron petals etc., are used for making squash. Potassium metabisulphite (KMS) is generally used as a preservative, whereas sodium benzoate is used as a preservative in squash made from coloured fruits like plum, jamun, phalsa and rhododendron petals.
Recipe: A generalized recipe for the preparation of squashes from different
fruits as a general guideline is as under:

Preparation and processing of the ice cream mix determine the functionality, safety, and consistency of the final product. This chapter describes the complete mix-processing sequence, beginning with ingredient measurement and blending and continuing through pasteurization, homogenization, cooling, and aging. It explains the purpose of each operation and its effect on proteins, fat globules, stabilizers, viscosity, microbial safety, and structure. Aging is particularly important because it supports fat crystallization and hydration of proteins and stabilizers, improving whipping and texture. The chapter also discusses common processing defects, corrective actions, and practical standard operating procedures, providing an industry-oriented framework for producing consistent and high-quality ice cream mixes.

1. INTRODUCTION

Harvesting is the process of gathering the crops from the fields at maturity. The harvesting of a commodity means the end of the growing season for a particular crop. Harvesting is the most labour-intensive activity of the growing season. Harvesting in general includes an immediate post-harvest handling, the actions taken immediately after removing the crop are pre-cooling, sorting, cleaning, packaging and up to the point of on-farm processing or shipping to the wholesaler or consumer.

Harvest timing is a critical decision that balances the likely weather conditions with the degree of crop maturity. Weather conditions such as frost, rain and unseasonably warm or cold periods can affect yield and quality. These conditions can be avoided by harvesting the commodities earlier than the harvest date, but this may result in poor yield and quality. On the other hand, delayed harvesting also results in a better yield, but increases the risk of weather problems. Thus, proper harvesting timings of horticultural commodities often play an important role.

Assessment of harvesting time is a critical time for growers of fruit and vegetables to decide the accurate period of crop harvesting. Fresh produce is normally ready for harvest when it has developed to the ideal condition for consumption and the condition is usually referred to as harvest maturity. Harvest maturity thus refers to the time when the “fruit” is ready to harvest and the time required to reach market. The harvesting should be done earlier than its ideal maturity for proper marketing.

Most growers decide harvesting time for different commodities by looking and sampling. Judgments are based on colour, size and shape (Sight); texture, hardness or softness (Touch); odour/aroma (Smell); sweetness, sourness, bitterness (Taste) etc. Experience is the best guide for this kind of assessment. Harvest maturity can readily be observed in some fruit crops but it can be more difficult in case of some fruits like avocados remain unripe off the tree after maturity.

Materials Required

Fruit juice/ pulp, cane sugar, potable water, essence, citric acid, colours, preservatives, weighing balance, bottling and sealing facilities, hand refractometer, homogenizer etc.  

Procedure

    1.    Extract the juice as discussed in previous exercise.
    2.    Filter the fresh or preserved juice through muslin cloth.
    3.    Calculate the quantities of juice, sugar, water, acid (if required), preservatives, colour, essence etc. required for preparation of a known quantity of                      squash as per FPO specifications.
    4.    Prepare the beverage as directed by instructor
    5.    Pack the beverage in bottles 
    6.    Seal the bottles and label them
    7.    Take out one of the bottles and measure its TSS and titratable acidity.

Introduction

For agricultural applications as well as for research work, often we need to prepare solutions of different agrochemicals of varying strength, as per the requirements. Agrochemicals are used to help crop plants grow, produce, and protect them from biotic/abiotic stresses. Many of the agrochemicals (insecticides, herbicides, fungicides, rodenticides, molluscicides, nematicides, etc.) are used to protect the crop from insect pests and diseases. However, some of them (fertilizers and soil conditioners) are used to augment crop yield. While in the previous chapter (Chapter 8) we discussed about preparation of laboratory solutions, in this chapter we will briefly discuss about the preparation of different agrochemicals.

Agrochemical/agrichemical is a generalized term used for the chemicals applied in agriculture. In general, it also includes the feed-supplements used in f isheries and animal husbandry.

Agrochemicals

Fertilizers

Fertilizers are used to augment growth of crop plants and to mitigate nutrient deficiency in the soil. Fertilisers can be organic (containing natural substances, prepared through natural processes) and inorganic fertilisers (synthetic fertilizers, manufactured artificially using chemical processes using natural deposits, by chemical alterations).

Soil Conditioners

Soil conditioners include manure, livestock and leaf compost, peat that help making the soil in good condition. They are laid on the top soil and then mixed properly. They not only increase nutrient contents in the soil but also improve aeration and water holding capacity.

Materials Required

Fruits or fruit pulp, steel pans, weighing balance, refractometer, sugar, salt, spices, acetic acid, citric acid etc. 

Procedure

    1.    Extract fruit pulp as told in earlier exercises. 
    2.    Take a known quantity of freshly extracted or preserved pulp.
    3.    Weigh sugar (about half the weigh of pulp).
    4.    Heat pulp and sugar over a gas flame.
    5.    Add spices, chillies, salt, citric acid (if required) etc. and cook
    6.    Record the TSS to judge the end point. It should be more than 50o Brix.
    7.    Add measured quantities of acetic acid and sodium benzoate at the end.
    8.    Cool and pack in pre-washed and sterilized glass jars
    9.    Label and store.

Fruit chutney is a product made in the same way as jam except that spices, salt, and acid (vinegar) in addition are added. The total soluble solids in chutney are] also less than that of jam. The product shall be of good quality with a palatable and appetizing taste. As per Food Safety and Standards Regulations, chutney\ shall contain a minimum of 40% fruit (w/w) in the final product with total soluble solids not less than 50%. The acidity in the final product shall not be more than 2% with ash content not exceeding 5%. However, for vegetablebased chutney as well as hot & sour (spicy) chutney, the TSS shall not be less than 25%.
Recipe: The generalized recipe for the preparation of chutney from different fruits is as under:

Jelly is prepared by boiling the fruit with or without the addition of water, straining the extract, and mixing the clear extract with sugar followed by cooking the mixture to a stage at which it will set to a clear gel. The jelly should be transparent, well set, but not too stiff, and have an original flavour of the fruit. It should be attractive in colour and should keep its shape when removed from the mould. As per FSSAI specification, the quantity of fruit and soluble solids in the final product (jelly and marmalade) shall not be less than 45 and 65 per cent (w/w) respectively. Jelly is made from fruit extract while jam is made from fruit pulp, therefore, jelly in contrast to jam is considered to be transparent and clear in appearance. Guava jelly is the most common commercial product.
Jellies: In the preparation of jellies, pectin is the most essential constituent which help in making the gel. Since, pectin is present in the cell walls of fruits as such fruit peel, whole or fruit slices along with a small quantity of water are gently boiled to extract the maximum proportion of pectin solution in the water extract. This water extract is used for the preparation of jelly.

Materials Required

Fruits juice, enzymes (pectinase, cellulase, pectinase CCM etc.), filter press, buchner filter apparatus, water bath, filter paper pulp, buchhi type rotary vacuum evaporator, freeze concentrator, membrane concentrator (whichever available), vacuum grease.

Procedure

    1.    Extract the juice as discussed in earlier exercises. Take a known quantity of juice in a conical flask.
    2.    Add enzymes i.e. pectinase @ 0.2% to the juice and keep in a water bath at temperature of 40-50ºC for 2 hrs.
    3.    Shake the flasks occasionally for uniform mixing of enzyme all throughout the flask during the enzymatic treatment.
    4.    Leave the flasks undisturbed for 10-12 hrs for allowing the insoluble solids to settle at the bottom of the flask.
    5.    Siphon the clear juice from the top of the flask.
    6.    Pass this siphoned juice through filter press or through a 0.4-0.5 cm thick bed of filter paper pulp in a Buchner filter apparatus or filter press.
    7.    Record the volume of the clarified juice obtained. Calculate the wastage.
    8.    Concentrate the juice in rotary vacuum evaporator at 50+2ºC temperature and at 28-30” Hg vacuum to a TSS of about 50 to 70º Brix. Record the exact TSS.
    9.    Record the volume of condensate obtained in the round bottom flask of the buchhi apparatus.
    10.    Calculate the folds of concentration

Fruit syrup is a beverage that contains at least 25% fruit juice/pulp, 65% total  soluble solids and acidity ranging between 1.2 -1.5%. It is preserved by using
350 ppm SO2 or 600 ppm benzoic acid. Fruit syrup is diluted before serving. Syrup can be made from the juice/pulp of jamun, ginger, lemon, phalsa, rose extract, bael, pomegranate, and brahmi (Bacopa monnieri) leaves/root extract, etc. Besides, a syrup/sharbat containing a minimum of 10 per cent of dry fruits is also regarded as fruit syrup.
Recipe: The generalized recipe for the preparation of syrups from different fruits is as under:

Materials Required

Apple (or any local fruit), fruit mill, hydraulic press, weighing balance, Refractometer/sugar pectinol, diammonium hydrogen phosphate, Saccharomyces cerevisiae culture, Potassium metabisulphite (KMS) etc.

Procedure

    1.    Take a known quantity of apple (or any other fruit) say 20 Kg
    2.    Extract the juice as discussed in earlier exercises.
    3.    Add about 200 ppm of kms.
    4.    Add sugar syrup to increase the TSS to about 20 – 24ºBrix.
    5.    To about 10 Kg of juice diammonium hydrogen phosphate (10 g) and pectinol (20-25 g are added).
    6.    Take about 500 ml of this mixture in a conical flask and add pure Saccharomyces cerevisiae culture @ 1 % and plug the neck with cotton. Keep at 22-24ºC to complete the fermentation within one day and yeast culture is ready.
    7.    Add this culture to about 10 Kg of must for further fermentation (i.e. culture is added @ 5% therefore 500 g is added to 10 Kg must).
    8.    Record the TSS of the must before fermentation.
    9.    Keep must for fermentation in big jars (narrow mouth) filled to about 75 % of their volume. Close the mouth of jars or bottles with cotton plug.
    10.    Allow fermentation to take place at 22-24ºC for about 10–15 days.
    11.    When no more bubbles are coming out of the jars, fermentation is complete. At this stage the TSS reaches about 7º Brix.
    12.    Siphon the wine. Add filter aids if wine is not clear.
    13.    Blend the wine with sweetening agents if required.
    14.    Fill in beer bottles by keeping a head space of about 2.5 cm followed by crown corking them.
    15.    Pasteurize the bottles by keeping at 62.5ºC for 20 min.

Materials Required

Fruit pulp, cane sugar, potable water, essence, citric acid, colours, preservatives, weighing balance, glass jars (500 ml capacity), jar closures, hand refractometer, steel pan, ladle etc.

Procedure

    1.    Select sound and fresh fruits, free from any blemishes. Generally a mixture of ripe and unripe fruits should be taken as the ripe fruits impart good flavour and the unripe fruits are rich in pectin, required for a good set.

    2.    Wash the fruits thoroughly. Cut into 4-8 pieces depending upon the fruit and size
    3.    Boil the fruit pieces for about 20-25 min in boiling water and pass through pulper to get a good pulp.
    4.    Weigh known quantity of fresh or preserved pulp and add about equal quantity of sugar (preferably in 45:55 ratio)
    5.    Cook the mixture on gas flame by occasional stirring. 
    6.    When the mixture becomes thick, perform sheet test.
    7.    Citric acid is added generally towards the end of cooking. Addition of all the acid in the beginning may result in stickiness and poor set. 
    8.    Remove from the flame when the mixture gives a clear sheet
    9.    Flavours, colours etc may also be added towards the end of boiling. 
    10.    Fill the jam in glass jars (preferably pre-warmed in hot air).
    11.    Close the jars with lug caps and allow to cool overnight.
    12.    Label and store in a cool place.

Materials Required

Fruit extract, cane sugar, potable water, essence, citric acid, colours, preservatives, weighing balance, glass jars (500 ml capacity), jar closures, hand refractometer, steel pan, ladle etc.

Procedure for Jelly

    1.    Select sound and fresh fruits, free from any blemishes. Generally a mixture of ripe and unripe fruits shouldbe taken as the ripe fruits impart good flavour and the unripe fruits are rich in pectin, required for a good set.
    2.    Wash the fruits thoroughly. Cut into 4-8 pieces depending upon the fruit and size
    3.    Boil the fruit pieces in water (about ½ to an equal weight of fruits for fruits like apple and 2-3 times the weight of sliced fruits in case of citrus fruits) for about 30 min. with occasional stirring. Strain the boiled mixture through coarse muslin cloth to get a clear pectin extract
    4.    A second extract may also be taken by boiling the same mass again and straining.
    5.    Add sugar (usually 3/4th to one part of the extract or in 45:55 ratio) to the pectin extract and boil in a stainless steel pan. Add required quantities of acid towards the end of boiling.
    6.    Remove the scum rising on the top of boiling mass occasionally.
    7.    To avoid charring, occasional stirring is also done.
    8.    To avoid destruction of pectin the cooking should be completed fast
    9.    Determine the end point of jelly as detailed ahead.
    10.    Fill in hot dry glass jars and cool rapidly
    11.    Pour a thin layer of hot molten paraffin wax seal to avoid moulding.   
    12.    Label and store in a cool place.