eChapters

1. Algal Biomass

Algae is defined as heterogeneous assemblage of organisms that range in size from tiny cells to giant seaweeds, thus algae mostly are photosynthetic species which include eukaryotes and prokaryotic Cyanobacteria (blue-green algae) and live in aquatic habitats. They are ubiquitous in nature and are found in variety of environments ranging from soil, sand, marshes, brackish water, sea and fresh water. Most of them are capable of manufacturing their own food.

Microalgal research is offering wide potential in food biotechnology and is gaining more attention because of presence of wide range of bioactive and nutraceutical properties and added health benefits.The increasing population is one of the major growing concerns of today’s world. To meet the nutritional requirement of the rising population, researchers are looking for optional sources for food which are easy to cultivate, cost effective and produce large amount of bioactive compounds useful to prevent major diseases. Chlorella is unicellular green alga that is a potential source of nutrients like carotenoids, minerals, vitamins, and polyunsaturated fatty acids. Especially, omega-3 fatty acid and carotenoids have received considerable interests due to their roles in the prevention of chronic diseases. Lutein and zeaxanthin from Chlorella have been shown to be associated with eye health and function. Beta-carotene is known to reduce the risk of CVDs and certain cancers. Animal studies also demonstrated that Chlorella supplementation reduced the serum cholesterol levels.

Similarly, the blue green microalgae Spirulina, possesses diverse biological activities and nutritional significance. Regular consumption of Spirulina fortified food improves immune system by increasing phagocytic activity of macrophages, stimulating the production of antibodies and cytokines, increase accumulation of NK cells into tissue and activation and mobilization of T and B cells. Spirulina have also shown to perform regulatory role on lipid and carbohydrate metabolism by exhibiting glucose and lipid profile correcting activity in experimental animals and in diabetic patients. They were also found to be active against several enveloped viruses including herpes virus, cytomegalovirus, influenza virus and HIV. They are capable to inhibit carcinogenesis due to antioxidant properties.

Introduction

For many years it has been an elusive task to provide a precise definition as to what constitutes quality in wheat. Each country has its own traditions in bread and other bakery products. Quality will mean different things to a miller, a baker, a grain handler or a plant breeder. As the baking industry becomes increasingly specialized, specific qualities are sought. Even among those wheat varieties generally recognized as having desirable quality traits, the influence of environment can be substantial, and this necessitates a high level of skill on the part of grain buyers to survey the current year’s crop and blend the wheat for a specific end-use. This genotype X environment effect on quality also limits the capacity of end-users to source identity-preserved wheat from a narrow geographic area. Those of us engaged in the field of plant breeding are concerned primarily with those traits that can be manipulated genetically, and we study their stability under a range of climatic conditions. Constraints in time, cost, and sample availability usually necessitate the use of predictive tests during early generations, followed by milling and baking tests on advanced lines that have met a number of agronomic, disease and predictive quality criteria.

Introduction

Dough is a complex mixture of flour constituents, water, salt and other ingredients depending upon the requirements of end-products. It is the principal intermediate stage in the transformation of wheat into different end-use products. Rheological properties of dough determine the behaviour of dough during mixing, rounding and molding used in making different products and also effect on the quality of finished product. Therefore, understanding the various features of dough rheology and their relations with product quality is important. The importance is enhanced further because of mechanization and automation of baking industry. Dough is composed of continuous phase in which gas cells are dispersed. The continuous phase is called “dough phase”. It consists of starch granules embedded in protein matrix along with some lipids, cell remnants and yeast cells in fermented dough. Gas production and retention is the most comprehensive quality requirements of the dough for bread making. The ability of the wheat dough to retain gas during fermentation and oven rise is unique. This depends on the ability of the dough to be stretched into thin membranes because of protein phase.

Introduction

Wheat is the most important cereal crop to the human kind. It is the main source of energy and nutrition in human diet. Wheat is consumed in the form of large number of end products as chapati, bread, biscuit, cakes, pretzels, noodles and pasta products. Millions of people are involved in milling, baking and pasta products industry with huge turnover per annum. However, each end-use product of wheat has it’s own specific requirement for example basically hard wheats along with strong gluten and high protein content are used for bead making. Soft wheat with weak gluten and low protein content are required for biscuit making Souza et al. (1994). Durum (tetraploid) wheat is used for pasta products as macaroni, vermicelli and spheghatti and Dicoccum for therapeautic purposes. Often chemical improvers are used to improve the dough properties for these products. Most of these chemicals have been banned because of their toxic effects. Therefore, only alternative is to develop varieties suited to meet the requirements of these end-use products. This needs better understanding of molecular basis of grain quality to accelerate breeding for producing wheat varieties for each end-use product separately. Storage proteins are the major component of grain which determines end-product quality. In this chapter detailed structure, genetics and functionality of gluten proteins are described.

Introduction

The health and wellness continue to drive growth in the global food industry as the consumers are constantly looking for the foods, beverages and other dietary solutions that will help them more aggressively to meet their own unique nutrition and personal health goals. Worldwide countries are going through a nutritional transition and are now affected by double burden of problems like nutritional and food security. The common alarming problems are under nutrition and specific nutrient deficiencies simultaneously coupled with imbalanced diets and chronic diseases. The problem of chronic diseases, non-communicable diseases (cardiovascular diseases, respiratory diseases, diabetes, obesity, cancer etc.) and malnutrition is more serious in the developing countries. The lack of access to health services, sufficient income, healthy and nutritious foods characterize majority of poor people in developing countries. So, food is not only the solution but also viewed as a product to enhance health and wellbeing, and it encourages the producers by supplying new goods that meet these needs. From the past decade, there has been growing consumer awareness regarding health, nutrition and the food safety which are often triggered by specific food incidents, especially in the developed countries and high-income groups in such countries. In the food industry there have been two broad trends which are hazards in the food chain and nutritional profile of the food. There has been recognition that hazards and contaminants can enter the food chain and can cause sickness, death and diseases, and so governments, often to deal with consumer and industry concerns, establish regulations and standards on food hazards including standards on pesticides, antibiotics, microbiological hazards and other chemical and physical contaminants. On the other hand, there is also a growing awareness of the health-enhancing properties for prevention and treatment of health concerns beyond the basic nutritional component of many foods.

Ice cream defects can result from formulation imbalance, poor ingredient quality, processing deviations, inadequate freezing or hardening, packaging problems, storage conditions, and cold-chain failures. This chapter provides a systematic framework for understanding, classifying, diagnosing, and correcting defects affecting flavour, body, texture, melting, colour, appearance, packaging, and storage stability. It emphasizes that a visible defect in the finished product may originate much earlier in the production or distribution chain. Examples include iciness caused by slow freezing or temperature abuse, weak body associated with formulation or overrun, and flavour problems originating from raw materials or microbial activity. Defect analysis therefore becomes an important tool for troubleshooting, quality improvement, training, and preventive action.

The cold chain is the lifeline of the ice cream industry because the product must remain continuously frozen from factory hardening until consumption. This chapter examines the complete cold-chain network, beginning with hardening and factory cold storage and extending through CFA or distributor cold rooms, refrigerated transport, retail freezers, and final consumer handling. It explains temperature requirements, monitoring systems, equipment selection, cold-room management, stock rotation, and quality assurance. Particular attention is given to Indian challenges such as power interruptions, inadequate freezer maintenance, poor retailer practices, and temperature abuse. The chapter demonstrates how disciplined cold-chain management protects texture, flavour, shape, overrun, shelf life, and ultimately consumer confidence

A greenfield ice cream project involves much more than installing production machinery. It requires integrated planning of the business model, market opportunity, capacity, product portfolio, plant layout, process technology, refrigeration, utilities, packaging, cold storage, quality systems, regulatory compliance, distribution, working capital, and future scalability. This chapter presents a practical framework for evaluating new ice cream manufacturing projects, with particular attention to a representative 1000 LPH facility. Different project scales and business models are considered along with major plant and machinery requirements. The chapter also highlights common project-planning mistakes and best practices. It helps entrepreneurs and investors assess technical feasibility, operational readiness, financial requirements, scalability, and long-term commercial viability.

Tamarind (Tamarindus Indica)

Introduction

The fruit of tamarind a pod 5 to 15 cm long, 3 to 10 seeds surrounded with edible pulp which is principal souring agent for sauces, chutney, in beverages and in general cooking. Pulp is carminative, laxative, given as infusion in biliousness and febrile conditions. It is also used in dyring and tanning and for polishing and cleaning metal ware. The tartaric acid is extracted from unripe fruits. The polysaccharide (jellose) is extracted from seeds, which is used as a sizing material in the cotton and jute industries. Besides, polyose obtained from the seed is good substitute for fruit pectin in the preparation of jam, jelly or marmalade. The bark and leaves are used for tanning. Tamarind balls are prepared after taking out seeds from the fruit. Tamarind paste and tamarind juice concentrate are the other commercial products.

The fruits, flattish, bean-like, irregulary curved and bulged pods, are born in great abundance along the new branches and usually vary from 2 to 7 in long and from 3/4 to 1 1/4 in (2-3.2 cm) in diameter. Exceptionally large tamarinds have been found on individual trees. The pods may be cinnamon-brown or grayish-brown externally and, at first, are tender-skinned with green, highly acid flesh and soft, whitish, under-developed seeds. As they mature, the pods fill out somewhat and the juicy, acidulous pulp turns brown or reddish-brown.

Introduction
Preservation by using common salt, spices and vinegar is a common method for the preparation of pickles, sauce and chutneys. Salt is mostly used as a preservative in pickles in combination with acid. Sodium chloride is used in brines and curing solutions or is applied directly to the food. The quantity of salt necessary to inhibit growth or harm the cells varies with the type of microorganisms. However, the minimum concentration of salt to act as a preservative is about 12%. Salt (sodium chloride) exerts its preservative action
by performing the following functions:
? Causing high osmotic pressure resulting in plasmolysis of the microbial cells.
? Dehydrating food by tying up the moisture thus making it unavailabl for the growth of microorganisms.
? Salt lowers the water activity and thus has adverse effects on microorganisms.
? Affecting the solubility of oxygen in the food and thus inhibiting the growth of aerobic microorganisms.
? Salt ionizes to yield chlorine ions, which is harmful to microorganisms.
? Chlorine in sodium chloride is a good oxidizing agent & is, therefore, toxic to microorganisms.
 

1. INTRODUCTION

The paradigm of world’s livelihood is built on the basic foundation of natural resources which includes humans, plants, animals, soils and minerals, water and air. But the very livelihood of these resources are at stake because they are strongly linked and dependant on each other. And to add, the material resource namely ‘economy’ has invaded the tranquil habitat and life of the community of natural resources. Thus the present crisis is challenging livelihood of each of these natural resources whether it is human, plant or water or earth and the element of economy is interfering with the natural recourse of human depending on water and soil; and human, plant, animal together are depending on soil, water and air. But when the livelihood of soil, water and air is at stake how human, plant and animal can survive; hence the design of livelihood of world has the essential ingredients of all natural resources.

We humans are selfish and concerned about our livelihood security only and try to over-exploit other natural resources and assumed themselves as the master of all natural resources. Practically, there is war going on between and among natural resources. The world could be better if each natural resource has its own right with prospects to safeguard its livelihood and all resources together with better livelihood could offer the lively world.

2. UTILIZATION OF NATURAL RESOURCES

We should underscore that none of the natural resources are in ‘plenty’ and that we should ‘economize’ on each natural resource to build together the world’s livelihood. The food security of humans can not be attained without plants and plant security can nor be achieved without soil and water and it is impossible to keep secured soil and water without economics of management.

In short, the livelihood security of humans is entirely dependant on all other natural resources coupled with the material resource economy. It is incumbent on us to initiate appropriate steps from gross root to policy levels to make the world better.

1. Introduction

Livestock meat and fish are rich sources of high-quality protein and other valuable nutrients such as polyunsaturated fatty acids, vitamins, and minerals and are an essential part of our healthy diet (Vladau et al., 2008; Mahmud et al., 2018; Mohanti et al., 2019; Mei et al., 2019). Food fraud and adulteration is an age-old distortive practice. The rising incidence of food contaminants and adulterants-induced health issues has challenged consumers to identify and consume safe livestock meat and fish products. Its significance has increased in recent years due to global trade, awareness among consumers, and sociopolitical issues.

1. Introduction

Extrusion of foods is an emerging technology for the food industries to process and market a large number of products of varying size, shape, texture and taste. Extrusion cooking of cereals is becoming more adaptive due to its various advantages over the traditional food processing techniques (White, 1994). Nowadays the extrusion of food is of major importance in the food-processing sector and it is the only process, which covers a wide range of food products such as ready to eat (RTE) breakfast cereals, snack foods, baby foods etc. Elaborate scientific research, technological development and engineering design, which have been done in this field so far, have led to large-scale industrial production. 

SYNOPSIS

In all probability the ancient farmer’s market originated on the streets of villages and later on, on the streets of towns. The street food survived through decades and centuries and now it has assumed its new role in fulfilling the readymade food demand of the working people of mega cities. The street food has now more relevance to the growing urban population. With the lapse of time and migration people to the cities, the business and activities of street food got expanded in qualitative and quantitative terms worldwide.

Abstract

Plantbreeding is an ancientart practiced throughselection ofplants fordesirable traits. Over a period of time it has evolved into scientific discipline with various methodologiesbasedon theories and principles ofgenetics. Since the rediscovery of Mendel’s law, there has been accelerated increase in yield of various crop plants due to development of high yielding varieties. Conventional approaches of following phenotypic selection from a variable population in early generation followed by yield testing in later generations have been highly successful in most of the crop species. This coupled with hybrid varieties led to significant increase in food-grain production during later half of the 20^th century. At present manycrops are facing yield plateau asthey have reached their maximum genetic potential. The growing condition is also deteriorating due to changing climate. There is an urgent need among breeders to utilize full arsenal of techniques available to them to sustain crop productivity. Molecular markers and marker assisted selection has come as a boon to the breeders to increase the efficiency ofselection in early generation breeding especially for traits whose phenotypic evaluation is difficult. Further, transgenic technology has the potential to incorporate genes from diverse sources, thus enriching the gene pool from which breeders can search for specific traits. Although at present there is skepticism about transgenic crops among public but this may become a viable strategy in future.

Abstract

Sustainable agriculture or farming is one that contributes to the overall objective ofsustainable developmenti.e. to meetthe present needs withoutcompromising the ability of the future generations to fulfill their own food needs and related demands from the land. A farming system is a complex, interrelated matrix of soils, plants, animals, power, implements, labour, capital and other inputs controlled by farming families and influenced to varying degrees by political, economical, institutional and social forces that operate at any levels. Research witha farmingsystems perspective has variousobjectivesranging fromincreasing the body of knowledge about farming system. The whole farming rather than the individual crops/enterprises need to be considered in the decision making under the farming systems approach. This is a multidisciplinary whole-farm approach and very effective in solving the problems of small and marginal farmers. Farming systems approach in analyzing the problems of agriculture is gaining lot of importance in recent years. Such a study would throw light on the problems associatedwith different farmingsystems and enable theacademicians and policy makers to formulate and implement appropriate policies for a balanced and integrated agricultural development.

Abstract

Molecular markers play key role in crop improvement. There are severalmarkers such as RAPD, SSR, AFLP, SNP, DArT and many more are available for their practical uses. From the past markers like RAPD, AFLP, and SSR have been used extensively in the crop breeding. Recently new markers such as SNP and DArT have become popular among the researchers of molecular biology for use in genomics-assisted crop breeding. These markers have been applied for study of genetic diversity, germplasm management, cultivar identification, genetic mapping, gene tagging and genomics etc. Though the conventional method of breeding willcontinue to play a primary role in the crop improvement, molecular marker technology is becoming one of its integral components. Agarose-based DNA markers like ISSR, CAPS, RAPD, SCAR and AS (allele specific) have the potential for faster and accurate breeding for target traits through MAS.

2.0. Introduction

Before dealing with the various processes involved in the processing of fruit and vegetables or any food commodity on commercial scale, it is necessary to consider certain important factors such as investment, site, building, water supply, staff, labour etc. which are essential for the successful running of the food processing plant. Processing plant is the premises, buildings, structure and equipment used in the preparation, processing, handling, transportation and storage of any food commodity / fruits and vegetables / the processed products. The design and layout of the food processing plant is of great importance, besides other important factors. The food processing plant may be single storeyed or multi-storeyed depending upon capacity of production and viability of the plant e.g. if the production of the plant is assumed to be small and processing plant have to run only for short duration during the year then single storeyed processing plant can serve the purpose. Plant layout, product layout and process layout are the most important components for setting up of food processing industry and can determine the working efficiency of unit. Sanitary requirements in food processing plant are also important for marketing of the prepared product in national and international market. Sanitary requirement is as important in food processing plant as is the treatment of the effluent waste. For setting up of the food processing plant certain guidelines have been laid out by FPO, 1955.

History of food safety starts with knowledge about food hazards. The term “safe food” can be defined from different angles since the end users are highly heterogeneous. However, the accumulating data and day by day emerging information aboutfood borne diseaseslead to a boom in public awareness about food safety. Food safety can be defined as “The strategies and activities aimed to protect foods from biological, chemical, physical, and allergenic hazards that may occur during all stages of production, distribution, and consumption” (Paperella, 2020). According to the World Health Organization (WHO), unsafe food,which contains hazardousmicroorganisms or chemicals, causesmore than 200 ailments, ranging from diarrhoea to malignancies among which diarrhoea is common. 

Introduction

Vast proportions of the population of the world are dependent on plants as their principal source of food either directly or indirectly. Recent decades have also seen increased numbers of people turning to alternative medical therapy based upon traditional folk medicine or food as a form of medicine. These alternative therapies emphasise the importance of a ‘good diet’ in maintaining and restoring health. Under these circumstances, vast majority of population may see diet therapy, dietary supplements and non-invasive alternative therapies as a safer, less technological and more natural way of maintaining health and treating and preventing individuals from illness. These alternatives may be seen as empowering the consumer and shifting the locus of control away from the medical establishment. This chapter covers many crucial topics to understand the chemistry and bioactivity of the active compounds of plant origin. It also aims to cover the latest research on the bioactive compounds.