eChapters

During the last 50 years or so, the world has witnessed tremendous changes in terms of population exodus, accessibility to food, advancement in agricultural science and technology, increased food production, efforts in mitigating food and nutrition security, natural and human made disasters and developmental efforts in handling and containing national and global issues. Inspite of these efforts, the challenges which have cropped up are plenty and at the same time creating avenues of opportunities to address those challenges in the interest of humanity. The world is large, countries are many, agro- climatic regions vary significantly, socio-economic conditions are distinct and the national, regional and global issues vary greatly. For ease of presentation and convenience of illustration, common issues only will be dealt in this chapter. Keeping in view the theme of this book, the following topics/issues will be discussed which pose challenges for the living humanity and for future generation within next 50 years. The views are limited to developmental, planning and implementation processes only in order for governments and others to consider overcoming these challenges.

    1.    Rice is a
        a)    Edible fruit    b)    Edible Vegetable
        c)    Edible flower    d)    All
    2.    Major components in cereal seeds are 
        a)    Endosperm    b)    Germ or embryo
        c)    a & b    d)    None
    3.    Bran is composed of 
        a)    Pericarp    b)    Testa
        c)    aleuron layer    d)    All
    4.    Oats contains ______________ percent of hull
        a)    50    b)    40
        c)    30    d)    20

    1.    Asepsis is a process of 
        a)    Removal of microorganisms    
        b)    Keeping out microorganisms
        c)    Hindering the growth & activity of microorganisms    
        d)    Killing the microorganisms
    2.    Self-decomposition of the food is prevented by
        a)    Inactivation of enzymes    b)    Delay of chemical reactions
        c)    a & b    d)    None
    3.    Commercially available fruit beverages are generally pasteurized at 
        a)    85°C for 25 to  30 min    b)    62.5°C for 25 to  30 min
        c)    71.1°C for 15 to  30 sec    d)    92.1°C for 15 to  30 min

    1.    As per FSSAI, 2011 regulations, what is the fat and SNF content in buffalo milk
        a)    5 & 9    b)    6 & 8
        c)    6 & 9    d)    None
    2.    As per FSSAI, 2011 regulations, what is the fat and SNF content in  cow milk
        a)    4 & 9    b)    4 & 8.5
        c)    6 & 9    d)    None
    3.    As per FSSAI, 2011 regulations, what is the fat and SNF content in  standardized milk
        a)    4 & 9    b)    4.5 & 8.5
        c)    6 & 9    d)    None

    1.    Fortification of common salt is done with 
        a)    Potassium iodide    b)    Potassium iodate
        c)    Both a & b    d)    None
    2.    Vinegar is a 
        a)    Class-I preservative    b)    Class-II preservative
        c)    Natural preservative    d)    a & c
    3.    As per FSSAI regulations, the permitted level of Sulphur dioxide in RTS beverages is not more than ______ ppm
        a)    100    b)    70
        c)    150    d)    80
    4.    Sodium nitrite is a
        a)    Preservative    b)    Buffering agent
        c)    Curing agent    d)    Flavour enhancer

    1.    Life blood of food companies are
        a)    Existing products    b)    New Products
        c)     New packaging material    d)     Food technologists
    2.    New Products are developed to meet
        a)    Health & Nutritional requirements
        b)    Environmental & Social requirements
        c)     Convenience & handling
        d)     All
    3.    What are the characteristics of a line extension in a variant of an established line of food products 
        a)    Little research    
        b)    Minimum manufacturing changes
        c)     No change in logistics and supply chain
        d)     All
    4.    The following one is not a characteristic of new product development through line extension
        a)    New purchasing skills
        b)    No change in logistics and supply chain
        c)     No change in storage of RM &PM
        d)     Minimum R&D

    1.    Laminar flow hood works on the principle of 
        a)    High-efficiency particulate air filter
        b)    High-energy particulate air filter
        c)     High-efficiency pressure air filter
        d)     None
    2.    Most of the organisms are killed
        a)    121°C for 5 min.    b)    15lb/in²
        c)     a & b    d)     None
    3.    Autoclaving is not recommended for
        a)    Oils    b)    Powders
        c)     Sensitive fluids    d)     All

    1.    What is the percentage of water in an adult’s body weight
        a)    50%    b)    60%
        c)    90%    d)    70%
    2.    __________ is a direct reactant in hydrolytic processes of many foods
        a)    Water    b)    Moisture content
        c)    Both a&b    d)    None
    3.    The bond angle of the isolated water molecule (vapor state) is
        a)    109°    b)    104.5°
        c)    109°28'    d)     103.6°

1.    Introduction

2.    Materials for Boat Construction

3.    Engines and Propellers

4.    Fuel Saving

5.    Development of Computer Aided Designing (CAD)

6.    Type and Size of Boats
    
    6.1    Trawlers
    6.2    Otter trawlers
    6.3    Side trawlers
    6.4    Stern trawlers
    6.5    Freezer trawlers
    6.6    Purse seiners
    6.7    Long liners
    
7.    Fishing Equipment
    
    7.1    Echo sounders and sonars
    7.2    Global positioning system (GPS)
    
8.    Global Maritime Distress and Safety System (GMDSS)
    
    8.1    Advantages of the GMDSS over the current system
    8.2    Implementation of the GMDSS requirements
    8.3    The main types of equipment used in GMDSS
    
9.    Distress Alert Transmitters (DAT)
    
10.    Automatic Identification System (AIS)
    
11.    Handling Equipments
    
    11.1    Advances in deck machinery
    11.2    Automated long line system
    11.3    Automated squid jigging machines
    11.4    Net haulers
    11.5    Net drums
    11.6    Gantries
    11.7    Stern ramp
    
12.    Side Thruster
    
13.    Satellites and Remote Sensing
    
14.    Vessel Monitoring System (VMS)
    
References

1.    Introduction
    
2.     Code of Conduct for Responsible Fisheries
    
3.     Technologies for Responsible Fishing
    3.1     Technology for bycatch reduction in trawl fisheries
    3.2     Technology for by catch reduction in purse seine fisheries
    3.3     Technology for by catch reduction in gillnet fisheries
    3.4     Technology for by catch reduction in hook and line fisheries
    3.5     Technology for by catch reduction in trap fisheries
    
4.     Environment-Friendly Fishing Gears
    4.1     Reducing bottom impact of towed gears
    4.2     Semi-pelagic trawl system
    4.3     Benthic release panels
    4.4     Remote controlled otter boards (smart trawling)
    4.5     Ground gear modifications
    4.6     Otter boards bridles and sweeps
    
5.     Energy Conservation in Fishing
    5.1     Fishing gear and methods
    5.2     Vessel technology
    5.3    Engines
    5.4    Reduction gear, propeller and nozzle
    5.5     Sail-assisted propulsion
    5.6     Adoption of advanced technology
    5.7    Conservation, management and enhancement of fishery resources
    
6.     Conclusion
    
References

1.    Introduction
    
2.    Indian Initiatives in Tuna Fishery
    
3.    Tuna Harvesting Techniques
    3.1    Locating tuna
    3.2    Fishing gear and machinery
    3.3    Post harvest catch handling and storage techniques
    
4.    Post Harvest Handling Techniques for the Production of Sashimi Quality Tuna
        
    4.1    Killing and cleaning tools
    4.2    The ten easy steps to sashimi quality tuna
    
Acknowledgements
    
References

1.       Introduction

2.    Lipid Storage in Fish
    
3.      Factors Influencing Nature of Lipids in Fish
    
4.    Composition of Fish Oils
    4.1    Nature and composition of fatty acids
    4.2     Triacyl glycerols
    4.3     Phospholipids
    4.4     Diacyl glycerol ethers
    4.5     Wax esters
    4.6     Hydrocarbons
    4.7     Sterols
    
5.    Autoxidation of Fish Lipids
        
    5.1    Mechanism of autoxidation
        
    5.2     Factors influencing lipid autoxidation
        
    5.3     Control and prevention of autoxidation
    
6.    Lipid Autolysis
    
7.    Rancidity Problem in Fish
    7.1     Indices of oxidative rancidity
    
References

1.    Introduction
    
2.    Structure of Protein
    2.1     Primary structure
    2.2     Secondary structure
    2.3     Turns and Bends in the Polypeptide Backbone
    2.4     Tertiary structure
    2.5     Quaternary structure
    
3.    Protein Denaturation
    
4.    Conditions Affecting Protein Structure
    
5.    Fish Proteins
    5.1    Sarcoplasmic proteins
    5.2    Myofbrillar protein
    5.3    Stroma proteins
    5.4    Functional properties of fish proteins
    
References
    
Further reading

1     Introduction

2     Bacterial Flora on Fish

3     Products of Bacterial Activity

4      Bacterial Flora of Fish Caught from Different Waters

5      Fish Spoilage and Bacterial Flora

6      Bacterial Contaminations
    
7      Bacterial Contamination of Harvested Fish
    
8      Growth of Spoilage Bacteria
    
9      Scombroid Poisoning
    
10      Microorganisms on Iced Fish
    10.1     Crustaceans
    10.2     Molluscs
    
References

1.    What is Surimi?
    
2.    Fisheries Resources for Surimi Production

    
3.    Historical Perspective of the Surimi Industry
    
4.    Present World Scenario of Surimi Industry

5.    Surimi Industry in India
    
6.    Processing Technology for Surimi from Light Muscle Fish 
    6.1     Types of fish used for surimi
    6.2     Heading, gutting, and deboning
    6.3     Mincing
    6.4     Washing and dewatering
    6.5     Stabilizing surimi with cryoprotectants
    6.6      Rapid freezing and packaging
    
7.    Surimi Processing from Dark Muscle Fish
    
8.    Quality Evaluation of Surimi
    
9.    Microbial Quality of Surimi
    
10.    Surimi based Products
    10.1     Fish cakes
    10.2     Fish balls
    10.3     Crab analogs (Crab leg meat analog)
    
11.    Scallop Analogs
    
12.    Moulded Products
    
13.    Important Considerations in Surimi and Surimi based Products
    13.1    Gelation
    
14.    Functional Properties of Surimi

15.    Cryoprotectants in Surimi
    15.1    Mechanism of action of cryoprotectants
    
16.    Future Development in Fish Protein Stabilization
    
References

    
1.    Introduction
    
2.    Containers
    2.1     Materials used for forming containers
    2.2    Types of cans
    2.3    Labeling and coding
    2.4    Can seam
    
3.    Microbilogical Aspects
    3.1     Organisms associated with non acid foods
    3.2     Heat resistance of bacteria
    3.3     Logarithmic order of destruction
    3.4     Thermal death time curve
    3.5     Determination of TDT and survivor number
    3.6     F-value
    3.7    12 D concept
    
4.    Heat Penetration Aspects
    4.1    Factors that influence heat penetration
    4.2    Measurement of cold spot temperature
    
5.    Thermal Process Calculation
    5.1    General method
    5.2    Formula method
    
6    Inoculated Pack Studies

7.    Effect of Thermal Processing on Food Quality
    7.1    Cook value
    
8.    Steps of Canning Fish
        
    8.1    Handling raw material
    8.2    Dressing and size cutting
    8.3    Salt treatment
    8.4    Precooking
    8.5    Smoking
    8.6    Packing/ Filling
    8.7    Exhausting and seaming
    8.8     Retorting and cooling
    8.9    Inspection and storage

References

1.    Introduction
    
2.    Resources
    2.1    Crustacea
    2.2    Zooplankton
    2.3     Mollusca
    2.4     Insecta
    2.5     Thallophyta
    
3.    Biosynthesis
    
4.    Structure
    
5.    Detection and Estimation of Chitosan
    
6.    Specification of Chitin and Chitosan
    
7.    Economics of Chitin Recovery and Production
    
8.    Social and Economic Value of Chitosan
    
9.    Production of  Chitosan from Chitin
    
10.    Production of Glucosamine Hydrochloride
    
11.    Recent Advances in Applications of Chitin and Chitosan
    11.1    Applications of chitin, chitosan and glucosamine hydrochloride
    
12.    Advantages of Chitosan
    12.1    Cholesterol and overweight lowering
    12.2    Cholesterol lowering in Human
    12.3    Osteoarthritis prevention and Treatment
    12.4    Carrier for nasal application of drugs
    
13.    Conclusion
    
References and Further Reading

1.    Introduction
    
2.    Dressing of Fish
    
3.    Preparation of Minced Meat
    
4.    Preparation of Flavor Ingredients
    
5.    Preparation of Colouring Ingredients
    
6.    Leaching of Minced Meat

7.    Ingredients Selected and their Role
    
8.    Preparation of Flavors
    
9.    Starch and its Role
    
10.    Extraction of Colours and its Application
    
11.    Taste Eenhancers
    
12.    Addition of Oil
    
13.    Standardized Preparation of Prawn Analogue from Bigeye Snapper
    
14.    Prawn Analogue Developed from Lizard Fish
    
15.    Cooking of the Shrimp Analogue
    
16.    Battering and Breading of the Analogue
    
17.    Freezing of the Product
    
18.    Frying of Prawn Analogue
    
19.    Packing of the Analogue
    
20.    Storage of Analogue
    
21.    Bacteriological Quality of Analogue
    
References

1.    Introduction
    
2.    Edible coatings used in Seafood Products
    2.1    Pre-dust
    2.2    Batter
    2.3    Breading
    
3.    The Coating Process
    3.1    Portioning
    3.2    Pre-dusting
    3.3    Application of batter
    3.4    Application of breading
    3.5    Pre-frying / Flash frying
    3.6    Freezing
    3.7    Packing and storage
    
4.    Coating Process Equipment
    4.1    Forming machine
    4.2    Pre-dusting machine
    4.3    Batter application equipment
    4.4    Breading application equipment
    4.5    Fryers
    4.6    Spiral freezers
    
5.    Coating Process Lines
    5.1     Single line breading system
    5.2     Tandem line breading system
    5.3     Tempura or batter-fry  Line breading system
    5.4     Tempura-Japanese Line breading system
    
6.    Coated Fishery Products
    6.1    Fish fingers
    6.2     Coated fish sillets
    6.3     Fish mince based coated products
    6.4     Coated shrimp products
    6.5     Coated squid products
    6.6     Coated bivalve products
    6.7     Crab claw balls
    
7.    Common Quality Problems Encountered during the Coating of Seafood
    7.1     Voids
    7.2     Blow off
    7.3     Pillowing
    7.4     Tailings
    
8.     Innovative Processes in the Production of Coated Products
    
References

1.    Introduction
    
2.    Different Forms of Value Added Products
    
3.    Production of Fish Steaks
    
4.    Battered and Breaded Products
    
5.    Minced Fish Based Products
    5.1    Fish cakes
    5.2    Fish cutlets
    5.3    Fish sausage
    5.4    Dehydrated salted fish cakes
    5.5    Fish fingers
    5.6    Fish burgers
    5.7    Fish balls
    5.8    Fish wafers
    5.9    Fish soup powder
    
6.    Surimi and Surimi Based Products
    6.1    Kamaboko
    6.2    Chikuwa
    6.3    Tempura
    6.4    Hampen
    
7.    Modern Seafood Analog Products
    7.1    Imitation crab meat
    
8.    Marinated Fish Products
    
9.    Fermented Fish Products
    9.1    Fish pickle
    
10.    Sous Vide Cook-Chill Products
    
11.    Precooked Seafood Entrees
    
12.    Future Needs
    
References