eChapters

Introduction

Water is not only a vital environmental factor to all forms of life, but it has also a great role to play in socio-economic development of human population. Since antiquity humans have valued the importance of clean water and have used various techniques to improve its quality. In modern times, the safe drinking water became first a public health issue and then a human rights issue. The access to safe drinkin gwater now considered as a basic human right which is an essential component of effective policy for health protection. Improving access to safe drinking-water can result in tangible as well as intangible benefits to health. It has been shown that investments in water supply and sanitation can yield a net economic benefit, because the reductions in adverse health effects and healthcare costs outweigh the costs of undertaking the interventions (WHO, 2017). Past experiences have also proved that interventions in improving access to safe water favour the poor in particular, whether in rural or urban areas, and can be an effective part of poverty alleviation strategies. The disparity in water availability, reliability, and quality between the developed world and developing countries is enormous. Unfortunately, in many developing countries people lack access to safe water and therefore waterborne diseases are still a major cause of death, especially among children under age of 5. According to a joint report by World Health Organization (WHO) and United Nations International Children’s Emergency Fund (UNICEF) (WHO/UNICEF report 2017), around 2.1 billion people worldwide lack access to safe and readily available water at home, and around 4.5 billion, lack safely managed sanitation facilities. Moreover, many of these countries that have set drinking water standards often lack the resources to implement or enforce them.

Introduction

India, with its unique agro climatic conditions is capable of producing a wide variety of fruits and vegetables. These highly perishable produce in both fresh and processed forms are of high demand in domestic as well as international market. Nowadays farming is becoming an enterprise and shifting towards consumer driven agriculture. Produce quality measurement is of utmost importance as consumers are more quality conscious and ready to pay higher for quality. Consumer preference is moving towards healthy food, minimally processed and, fresh cut fruits and vegetables, prepared salads, ready to cook, ready to eat and ready to drink health beverages. Hence health, nutrition, convenience, quality and safety of produce should be guaranteed to the consumers. Due to globalisation of production and trade, legislations and standards for markets are strict and product quality is the necessity for competitive markets.

Quality of a produce, based on subjective and objective measurement, is defined differently by consumers, wholesalers, retailers, processors or any other who is associated with it and varies with market either national or international. Quality of foods may be defined as the composite of those characteristics that differentiate individual units of a product, and have significance in determining the degree of acceptability of that unit to the user (Kramer, 1965). According to ISO (International Organisation of Standardisation), “Food quality is the totality of features and characteristics of a product that bear on its ability to satisfy stated or implied needs” and as per CAC (2003), “Food safety is the assurance that food will not cause harm to the consumer when it is prepared and/or consumed according to its intended use”. Food safety is the most important component of quality.

INTRODUCTION

The concept of hurdle technology has been developed as a new way to realize safe, stable, nutritious and economical foods. It employs combination of different preservation techniques to achieve a multi-target, mild but reliable preservation of foods. The application of hurdle technology in food preservation is increasing rapidly worldwide. Over the years, insight into the hurdle effect has been broadened and the application of hurdle technology has been extended. A better understanding of the occurrence and interaction of food preservative factors (hurdles) in foods is the basis for improvements in food preservation. If the hurdles for the microbes are known, the microbiological stability and safety of this food might be optimized by changing the intensity or quality of these hurdles. Using the proper combination of hurdles, it is possible to improve not only the microbial stability and safety but also the sensory and nutritive quality as well as the economical aspects of food. The hurdle concept is also referred to as food preservation by combined methods, combined process, combination preservation or combination processing techniques. The hurdle effect is of fundamental importance for the preservation of foods. The illustration of hurdle effect was first introduced by Leistner in 1978. Based on the understanding of hurdle effects, the concept of hurdle technology was derived (Leistner 1985).

INTRODUCTION

A mixture is a combination of two or more elements or compounds in any proportion so that the components do not lose their identity. Most materials in our world are mixtures and very few materials are pure substances. Foods are complex mixtures of compounds and the extraction or separation of food components is fundamental for the preparation of ingredients to be used in other processes. Separations usually aim to remove specific components in order to increase the added value of the products, which may be the extracted component, the residue or both. Purposes include cleaning, sorting and grading operations, extraction and purification of fractions such as sugar solutions or vegetable oils, recovery of valuable components such as enzymes or flavour compounds, or removal of undesirable components such as microorganisms, agricultural residues or radionuclides. For example, cooking oils from oilseeds or gelatin from connective tissue; or for retrieval of high value compounds, such as enzymes (e.g. papain from papaya for meat tenderisation or rennet from calf stomachs for cheese making). Other types of separation methods are used to sort foods by separating them into classes based on size, colour or shape and to clean them by separating contaminating materials.

I. INTRODUCTION

The fruits and vegetables we eat and flowers and ornamentals we enjoy are biological entities. They breath, produce heat, perspire, are easily damaged, get diseases and finally die. These carry on processes characteristics of all living things before or after harvest to perform the metabolic activities:

1. to maintain cellular organization
2. to transport metabolites around the tissue and
3. to maintain membrane permeability.

Food is a resource of immense importance and its safety in the whole production and supply chain, is very crucial. In the last century, drastic increase in the incidence of food borne illnesses, large-scale food poisoning outbreaks and surfacing of new foodborne pathogens and hazards were widely reported. Contaminants can enter food through various pathways in the food production process, and can occur naturally or as the result of inferior or inadequate production practices. Concerns on food safety are fuelled by the industrialization of agricultural production, liberalization of trade, tourism, food consumption pattern and food preparation practices. The availability of information through the mass and social media increases the number of reported cases of inadequate food safety. International competitiveness depends more on quality and safety concerns than on prices and this creates a need for safer food production and distribution practices.

Introduction

Food Safety is the assurance that food is acceptable for human consumption according to its intended use. The slogan of the World Food Safety Day 2019 “If it’s not safe - it’s not food!” portray, unsafe food is a threat to mankind. Ensuring food safety to protect public health and promote economic development is of utmost importance and it remains a significant challenge in both developing and developed countries. Food borne diseases remain a real and formidable problem, causing great human sufferings and significant economic losses. According to WHO 2019-20 World Water Day report, one third of the population of developed countries may be affected by food-borne diseases each year and the problem is likely to be even more wide spread in developing countries, where food and water borne diarrhoeal diseases kill an estimated 2.2 million people each year, mostly children. While unacceptable rates of food borne illness still remain, new hazards continue to enter the food supply.

A food safety hazard refers to any agent with the potential to cause adverse health consequences for consumers. It occurs when food is exposed to hazardous agents which result in contamination of food. In other terms it can be defined as anything that could contaminate food or could otherwise violate established food safety program criteria, if left uncontrolled. The National Advisory Committee on Microbiological Criteria for Foods (NACMCF, 1997) defined a hazard as a “biological, chemical, or physical agent that is reasonably likely to cause illness or injury in the absence of its control”.

A hazard may be introduced into the food supply any time during harvesting, formulation and processing, packaging and labelling, transportation, storage, preparation and serving. Food safety hazards are generally categorized into four classes: Physical, chemical, biological and allergens. Food manufacturers can adopt Food Safety Management Systems (FSMS), which include Good Manufacturing Practices (GMP), Good Hygiene Practices (GHP), Hazard Analysis and Critical Control Point (HACCP) and other practices to strictly check the hazards and make the food safe.

Understanding the hazards that contribute to food borne illness and injury is important to determine the necessary steps to prevent or reduce it to an acceptable level or eliminate hazards altogether before food reaches the consumer.

Introduction

Packaging is the science, art and technology of enclosing or protecting products for distribution, storage, sale, and use. Packaging also refers to the process of design, evaluation, and production of packages. Packaging may be defined as the art and science which involves preparing the articles for transport, storage display and use. India is a land of large varieties of fruits and vegetables due to its vast soil and climatic diversity. With 38 and 71 million tons of production of fruits and vegetables, India is the second largest producer of fruits and vegetables next to Brazil and China respectively. Apart from the huge value addition and employment involved in these activities, packaging has served the Indian economy by helping preservation of the quality and lengthening the shelf life of innumerable products-ranging from milk and biscuits, to drugs and medicines, processed and semi-processed foods, fruits and vegetables, edible oils, electronic goods etc., besides domestic appliances and industrial machinery and other hardware needing transportation (FAO, 1985).

Introduction

Fruit and vegetable development starts with formation of an edible part fruit setting, seedling emergence, tuber development and ends with loss of edible character, or spoilage through physiological deterioration, development of fibrous character or spoilage through microbiological intervention . The state of maturity of a fresh horticultural commodity is therefore is a continuum process along the development scale. The term mature implies that point in the development scale when the horticultural commodity in the state that is ready to use (consume, process, store). For the packing house, maturity means suitability for storage followed by sufficient shelf life to assure profitable supply to markets. On the other hand, the retail consumer may value colour, flavour, or textural attributes. This implies that maturity and an appropriate compromise must be achieved through the marketing process.

Quality, on the other hand, relates to the degree of the satisfaction that the consumer or customer is likely to obtain through the use of mature commodity. Maturity and quality are interrelated with market expectations or requirements. These expectations or requirements are expressed through regulations or guidelines of grower groups or through legislative authority expressed as quality standards or grades and enforced through inspection agencies associated with government departments.

1. Introduction

Fermented milk products such as yoghurt are produced through out world (Kurmann et al., 1992). Yoghurt can be characterized as a gel like coagulated milk product, having a smooth consistency and a pleasing flavour and is now widely consumed both by infant and adult populations. It is common that yogurt preparation involves the use of equal amounts of two lactic acid bacteria (LAB): Streptococcus thermophillus (St) and Lactobacillus delbrueckii ssp. bulgaricus (Lb); samples prepared with these starter bacteria are labeled Lb-St (Ng et al., 2011). In the early stage of the incubation process, Lb stimulates the growth of St releasing amino acids from casein (where the most important is valine) and producing a moderate reduction in pH due essentially to St. Yoghurt has better digestibility than milk and this is related to its comparatively high content of free amino acids. Besides nutritional value, it possesses hypocholesterolaemic (Mann, 1977) and antitumour effects (Odd et al., 1983; Reddy et al., 1983).Yoghurt may be set or stirred and has a potential for being used as dietary supplement for infants. So they cross the line between dietary supplements, health foods and conventional foods with great facility. Now a days, emphasis is given on sweeteners and more natural sweeteners will be used (Hollingsworth, 2001). Natural sweeteners can be easily incorporated in yoghurt by blending cattle milk with fruit pulps like mango. The enhancement of other nutrients e. g. vitamins and minerals will be added advantage. Mango pulp which contains a high proportion of sugar, mostly monosaccharide, is easily adsorbed by the digestive systems (Celik and Bakirci, 2003).

Soybean is a comparatively inexpensive source of high quality protein. The protein and fat contents in soybean are above 40 % and 20 %, respectively. Nutritionally, soy protein is a more balanced plant protein for human consumption. Studies have indicated that consumption of soy protein decreases total serum cholesterol and minimizes risks for several cancers (Anderson et al., 1995; Messina, 1997; Zind, 1998). The positive health benefits associated with soybeans have greatly increased its consumer awareness which has created a large market for soy foods (Ohr, 2000; Liu, 2000). The problem of beany flavour in soy products can be overcome by lactic acid fermentation (Buono et al., 1990; Granata and Morr, 1996). Soy solids are not only abandoned source of protein but also have therapeutic properties against breast, prostate, colon and lung cancers due to its isoflavones like genistein and daidzein content. Fortification with soy made yoghurt beneficial in lowering cholesterol level and blood pressure and in relieving symptoms of menopause and osteoporosis.

The physio-chemical properties of ice cream strongly influence its processing behaviour, texture, stability, and consumer acceptance. This chapter examines ice cream as a complex multiphase system and discusses important properties including overrun, density, viscosity, freezing behaviour, hardness, scoopability, meltdown, and fat destabilization. It explains how formulation and processing conditions influence these properties and how they relate to sensory quality. The chapter also considers quality-control tests used in industrial ice cream plants and identifies defects associated with physio-chemical imbalance. Understanding these relationships enables manufacturers to establish suitable product targets, diagnose quality problems, optimize formulations, and maintain consistency across different ice cream products.

Preparation and processing of the ice cream mix determine the functionality, safety, and consistency of the final product. This chapter describes the complete mix-processing sequence, beginning with ingredient measurement and blending and continuing through pasteurization, homogenization, cooling, and aging. It explains the purpose of each operation and its effect on proteins, fat globules, stabilizers, viscosity, microbial safety, and structure. Aging is particularly important because it supports fat crystallization and hydration of proteins and stabilizers, improving whipping and texture. The chapter also discusses common processing defects, corrective actions, and practical standard operating procedures, providing an industry-oriented framework for producing consistent and high-quality ice cream mixes.

Industrial ice cream manufacturing is an integrated system involving food science, dairy technology, mechanical processing, refrigeration, quality assurance, hygiene, packaging, maintenance, utilities, manpower, and cold-chain management. This chapter explains how each manufacturing stage influences the next, from raw-material receiving and mix preparation through pasteurization, homogenization, aging, freezing, filling, hardening, storage, and distribution. It emphasizes process discipline, equipment reliability, trained personnel, KPI-based management, preventive maintenance, and cold-chain integrity. The chapter also addresses quality control, food safety, sustainability, digitalization, and operational challenges. It provides practical guidance for factory managers seeking consistent quality, productivity, controlled costs, reduced losses, and long-term operational excellence

Sales and distribution determine whether a technically excellent ice cream product successfully reaches consumers in the required condition and at the right time. This chapter examines the architecture of ice cream distribution in India, including factory dispatch, CFAs, distributors, retailers, parlours, modern trade, quick commerce, and online channels. It discusses route-to-market design, presales, delivery systems, distribution management, retail execution, outlet classification, freezer deployment, and channel economics. Product flow and information flow are considered together because sales data, stock information, complaints, freezer conditions, and market feedback influence production and planning decisions. The chapter provides practical insights into distribution KPIs, channel management, cold-chain discipline, and strategies for sustainable market growth.

Introduction

Terrorism has been experienced throughout human history by unlawful violence against innocent population to achieve financial or religious or political objective (Rakesh Gupta, 1998). Terrorism has no geographic or geopolitical boundaries and is adapting to changes in the socio-political environment. Progress in the area of science and technology have the potential to be used for both beneficial and harmful purposes leading to dual-use dilemma. Of late, more scenarios are witnessed where the applications of well-intentioned scientific research are being used for vicious purposes. Earlier, terrorism has been associated primarily with physical acts of violence and crime. Eventually the global militant and terrorism strategies evolved to chemical, nuclear, radioactive explosive agents to biological terrorism. Recently, cyber terrorism controlled by computers has seen a new form of criminal activities (www.hannover-re. com).

Introduction

It is an eminent actuality that the diets of end users are being advanced globally; however, the patterns of food procurement and food safety protocols diverge across countries. The fundamental rationale of the trend is that the consumer awareness with regard to food safety, quality and variety has been proliferated greatly. Looking back to the history of food industry, it is unquestionable that the past has a full frame of misfortune, indignity and many disastrous incidents. Moreover, the entire muddle was not always related with microorganisms; numerous of them were associated with environmental problems, technological advancements or certain alterations in production protocols and management.

Fruits and vegetables are more perishable and generally have a higher value compared to cereals, making them very important in terms of minimizing waste and improving employability in the food industry. The losses in fruits and vegetables are significant, but through effective post-harvest processing, these losses can be reduced, and surplus produce can be better utilized. This processing involves a variety of techniques that prepare fruits and vegetables for conversion into processed foods. The food preservation and processing industry has evolved from being a luxury to an essential sector, playing a crucial role in conserving and enhancing the utilization of fruits and vegetables. To prevent waste during peak seasons and ensure availability during off-seasons, modern methods of storage and processing are necessary. These techniques allow for both large-scale and small-scale processing, extending the shelf life of produce for better distribution. The ultimate goal of food processing is to apply systematic techniques to preserve, process, package, store, and distribute food in a way that ensures a steady supply of diverse and nutritious food options, thereby improving food intake and nutritional standards, particularly during periods of low availability.
For effective preservation and processing, key prerequisites include cleaning, grading, and sorting the produce based on its maturity level. This ensures that only the highest quality fruits and vegetables are used in the processing chain, maintaining food safety, nutritional value, and consumer acceptability throughout the year.
CLEANING OF AGRICULTURAL COMMODITIES
Blanching is a unit operation used in food processing to remove contaminating materials from food and prepare the surface for further processing. In vegetable processing, blanching serves the additional purpose of cleaning the product. This process involves briefly exposing the food to heat, typically by immersing it in hot water or steam, which helps to remove dirt, enzymes, and microbial contamination. By doing so, blanching not only improves the quality of the food but also prevents microbial growth during storage or delays in processing. This early removal of contaminants ensures that the remaining bulk of food is preserved and remains safe for consumption throughout its shelf life.

SYNOPSIS

Food security is a complex issue, linked to availability and access to food, malnutrition in the population, economic development, environment, and local and global trade. Malnutrition hinders healthy growth and proper development of the human immune system affecting neurological and cognitive development especially in children.

Abstract

Potato in India was introduced as a long day temperate crop which found suitable climate in the higher hills of the country. Since then it is grown widely in the Indo-Gangetic Plains, the Plateau and the Himalayan regions in north and the Nilgiris hills in south of India. The Central Potato Research Institute (CPRI), Shimla has developed 49 potato varieties by the conventional breeding for suitable cultivation of potato in different potato zones of India. A number of technologies for ware- and quality seed- potato production, storage and processing have been developed/standardized for adoption by the end users. These technologies have contributed immensely towards multiple increase in area, production and productivity of potato during last sixty years. Apart from conventional tools, modern biotechnological tools like whole genome sequencing technology, transgenics technology, molecular markers, RNAi and microarray technology have are also being employed in potato improvement.