eChapters

1. INTRODUCTION

Stone fruits belonging to family Rosaceae (sub family-Prunoideae) include several important fruit crops like peach, plum, apricot, cherries, nectarines etc. The World production of these stone fruits is approximately 45.49 million tones; out of which 39.61 million tones stone fruits are grown in Asia and India contributes 6.67 million tones of stone fruits annually. Among all the stone fruits Peach, Plum and Apricot production in world is 24.98, 12.05 and 4.11 million tones, respectively whereas India alone produces 287778, 261903 and 17862 metric tones of peach, plum and apricot, respectively (Table 1). These stone fruits are grown extensively in USA, Spain, France, Italy, Turkey, Morocco, Iran, Africa and Australia. In India, these are grown in J&K, Himachal Pradesh sub-mountainous tracts of Punjab, Uttarakhand, North East States and to the limited extent in the Nilgiris hills. Primarily, these stone fruits are used for table purposes or processed to prepare various types of value added products like jam, jelly, marmalades, preserves, baby foods, nectar, juices, squashes, concentrates, ready-to-serve beverages, wines and also processed into dried products.

Fisheries comprise a major economic activity within complex interactions between human beings and water - ‘the first among equals’ of the natural resources (Ahmed, 1992). Fisheries data assembled by the Food and Agriculture Organization (FAO) suggest that global marine fisheries catches increased to 86 million tonnes in 1996, then slightly declined. In the past three decades, employment in fisheries and aquaculture has grown at a higher rate than the growth of world population. The fishery engineering is evolving as an important domain in view of depleting stocks on both pre and post-harvest scenarios. It will also aid in fish processing technologies, optimizing energy and water use in seafood industries, mitigating climate change related issues and reducing carbon foot print. It is important to explore novel ways to obtain, quantify, and integrate industry responses to declining fishing stocks and increasing management regulations into fishery - and ecosystem-based management advice. The technological interventions help to reduce the wastage of fishes, which is otherwise a highly perishable commodity by preservation technologies and converting it into value added products with higher shelf life. Use of appropriate technologies along the fish value chain will help in producing better quality products and fetch more markets and higher price.

Major areas of technological interventions in the field of fishery engineering cover design and development of fish processing equipment and machineries, energy efficient and eco-friendly solar fish dryers, fuel efficient fishing vessels and fiberglass canoes, indigenous electronic instruments for application in harvest and post-harvest technology of fish, quality improvement of Indian fishing fleet and energy and water optimization techniques for fish processing industries. Focused areas include development of cost effective solar dryers with LPG, biomass, Infra-Red or electrical back-up heating systems, fish de-scaling machines, Fish freshness sensor etc.

1. INTRODUCTION

Vegetables occupy a prominent position in our diet especially to tone up our digestive system and provide nourishment. Regular use of vegetables, supply many essential health building and protective substances, such as vitamins and minerals. India ranks second in vegetable production in the world. The abundant production of vegetables during the season, results in a glut. Consequently, a large quantity of vegetables gets spoiled resulting in a considerable loss of natural resources. Therefore, preservation is the best way to save the wastage of vegetables and make them available even in the off-season (Plate 1).

5.1 Technology readiness levels- Introduction
Technology readiness levels (TRLs) is measurement of the maturity level of a particular technology. These are based on a scale from 1 to 9, with 9 being the most mature technology. It is a map that shows whether a given technology is in a conceptual state or can be used in real-world applications and ensures innovations are thoroughly tested before being applied on a large scale. The TRL scale uses a set of questions designed to measure progress of a technology toward maturity. They help in reducing risks and improving efficiency. TRLs were initially designed in the 1970s for use by NASA to assess how prepared a technology was for space missions. Technology for space travel is always extremely sophisticated and with a high degree of risk. NASA required a system to assess systematically whether or not a new technology was ready to implement. By breaking down development into different levels, NASA was able to provide informed decisions on which innovations were ready to incorporate (figure 12). In due course, TRL proved to be so effective that other industries began to use it. Other entities like the European Space Agency (ESA), U.S. Department of Defense (DoD), BIRAC, DRDO and many other agencies have taken , to using TRL to guide R&D strategies. TRL helps in simplifying development, decreasing risks, and maximizing resource utilization.

India has made considerable progress in improving its food security. The agricultural development strategy pursued in the country, particularly since the mid-sixties, is recognized and appreciated world over. The integration of agricultural research with quality education and a properly planned extension education system has been one of the fundamental foundations of this developmental strategy, which also led to revolutions in many other sectors of agriculture and allied enterprises. As a part of this strategy, several programmes of transfer of technology from research stations to farmers’ fields were launched in the country. These included National Demonstration Project, Lab to Land Programme, Operational Research Project and Krishi Vigyan Kendras (Farm Science Centers). The programmes were continuously reviewed from time to time and reformulated for their effectiveness. Presently the Krishi Vigyan Kendras (KVKs) have been recognized as an effective link between agricultural research and extension system in the country (Venkatasubramanian et. al., 2009).

Krishi Vigyan Kendras (Farm Science Centers), an innovative science-based institution, were established mainly to impart vocational skill training to the farmers and field-level extension workers. The concept of vocational training in agriculture through KVK grew substantially due to greater demand for improved/agricultural technology by the farmers. The farmers require not only knowledge and understanding of the intricacy of technologies, but also progressively more and more skills in various complex agricultural operations for adoption on their farms. The effectiveness of the KVK was further enhanced by adding the activities related to on-farm testing and front-line demonstrations on major agricultural technologies.

1. INTRODUCTION

Indians are known to prepare preserves from the ancient times. They were also familiar with ther therapeutic values associated with the preserves. Besides, candies, reathers and toffees are the other food products prepared and consumed. In this chapter, the methods of their preparation are described.

2. PRESERVES

A preserve is made from properly mature fruit, by cooking it whole or in the form of large pieces in heavy sugar syrup, till it becomes tender and transparent. In its preparation not less than 45Kg of the fruit are used for every 55Kg of sugar, and cooking is continued till a concentration of at least 68 per cent of TSS (Total Soluble Solids) is reached.

Freshly made preserves are wholesome and have an attractive appearance. When they are stored for a long period, their natural colour and flavour deteriorates on account of oxidative changes. They should therefore, be made only during the season, unless there should be adequate facilities to keep the fruits so that they are available in the off-season also.

Introduction

Test of pollen viability (extent of pollen viability) is important in pollination experiments to ensure fertility/seed setting. It is also important in monitoring state of pollens during storage in ecological/ taxonomic studies as well as during research on pollen biochemistry, genetics, stigma interactions, and incompatibility studies. Pollen viability refers to the ability of pollen to accomplish post-pollination events to achieve fertilization. Pollen viability test has gained importance particularly in plant breeding and hybrid seed production experiments/ practices. In this chapter, you will be acquainted with the basics of pollen viability test. However, for more professional knowledge on the topic readers are suggested to refer specialized books.

Pollen Viability Test

It is important to know the extent of viability of pollens used in pollination experiment, in finding fertility of a plant of interest, to monitor state of pollen on storage, in ecological/taxonomic studies, as well as in research on biochemistry, genetics, stigma interaction, incompatibility assay, etc. of pollen. Several pollen viability tests have been developed time-to-time. It is recommended to initially use different tests for a given pollen type to find out the most appropriate method that provides reliable result on pollen viability. It is important to note that every procedure requires standardization of protocol according to the sample used. Following different tests are used for assessing pollen viability.

1. In-vitro Pollen Germination Test

It is a simple, speedy, and quantitative test for assessing pollen viability. In this method, a collection/sample of pollen is germinated in vitro and observed under microscope. The percentage of germinating pollens (producing pollen tube) after appropriate treatment and a given period of time is determined. The percentage provides an index of viability of the pollen sample.

Introduction

Seed is a living entity (mature ovule) consisting of a tiny plant in embryonic stage along with the stored food protected by an outer layer known as seed coat. Seed is an important biological input in agriculture, which is economically important for successful crop husbandry. Cotyledons serve as the source of nutrients (proteins, carbohydrates, and oils) that not only nurture the plant at the early developmental (seedling) stages of plant but also the vegetarian (heterotroph) organisms. Being one of the important inputs in agriculture, viability of seed needs to be assessed to know the germination percentage of seeds used to raise a crop. Since viability of seeds may deteriorate on storage depending on the storage conditions. Therefore, often it becomes important to test viability/germinability and vigour of seeds before being used for raising a crop or conducting an experiment. In this chapter, we briefly discuss about the different methods which can be used for testing the viability of seeds.

Seed Viability

Seed viability can be defined as the capability of the seed to germinate and produce a normal seedling within a specified period. In other words, seed viability indicates how many seeds in a lot are alive and could develop into plants under appropriate field conditions. It is very important that most of the stored seeds are capable of germinating when sown in a field. They must possess higher viability at the beginning of storage and maintain it over the storage. A seed with high initial viability survives longer in storage; however, the viability deteriorates slowly at first and then rapidly as the storage prolongs. It is important to know the duration of storage after which a considerable decline in viability occurs under given storage conditions so that to take necessary action to revive the seeds. Excessive deterioration in vianility of seeds may lead to loss of the seed/material/ germplasm.

The growing chemicalization of milk presents a great challenge to the dairy industry. A number of chemical compounds get entry into milk, intentionally or un-intentionally, through their direct or indirect usage for crop, animal; or dairy husbandry practices, as environmental contamination. Several of these contaminants may be naturally present on grazing grass or use as pesticides for green fodder or they may get entry through use of compounded animal feeds. These eventually get excreted into milk as residues and pose problems to food safety. The risk of health hazards arises from veterinary drugs, residual pesticides, heavy metals, detergents and micotoxins etc. It is therefore, become necessary to detect these contaminants in order to make food safe for human consumption.

Detection of Aflatoxin M 1 in Milk

Material requirements : Glass column(30 cm x 1 cm), Silica gel (63-200 µg particle size), volumetric flasks, beakers, micro pipette, HPLC equipment fitted with C 18 column(25 cm x 4.6 mm) and fluorescence detector.

Reagents: Sodium chloride solution (400g in 1000ml water), acetonitrile/water mixture (25:75), sodium sulphsate, chloroform, toluene/acetic acid mixture (9:1), acetonitrile/diethyle ether/hexane mixture (1:3:6), chloroform/acetone mixture (8:2), n-hexane and aflatoxin standard ampule.

Preparation of stock solution : Transfer contents from 2.5ml or 0.5ml ampoule, quantitatively, to 25ml or 50ml volumetric flask respectively. Rinse ampoule with small quantities of chloroform and collect rinsing into flask. Makeup the volume with chloroform, mix well and store at 5º C or below. These solutions will contain 1 µg per ml aflatoxin M1.

Working solution : Transfer 0.5ml of stock solution to a 10ml conical flask. Evaporate contents to dryness using inert gas. Dissolve residue in 10ml of acetonitrile/water mixture. Prepare series of dilutions containing 0.0025, 0.005, 0.01 and 0.025 µg/ml aflatoxin. Similarly treat 5ml of stock solution to give a concentration of 0.5 µg/ml.

Ice cream is a complex multiphase food system in which fat, proteins, sugars, water, air, ice crystals, and stabilizers interact to determine its structure and eating quality. This chapter introduces the scientific principles governing ice cream composition, microstructure, freezing behaviour, and processing. It explains freezing-point depression, ice-crystal formation, colloidal behaviour, foam development, and structural changes during processing. Particular attention is given to the relationship between microscopic structure and sensory properties such as smoothness, creaminess, body, and meltdown. By connecting food chemistry with processing technology, the chapter establishes the scientific foundation required to understand formulation, manufacturing performance, quality control, and product stability.

Packaging is not only an integral part of product presentation but also plays a vital role in preserving food quality and extending its shelf life. In a world where food must travel vast distances from producers to consumers, often across varying climates and storage conditions, effective packaging is essential. It serves multiple functions, from protecting food against physical, chemical, and biological hazards to providing a medium for branding, regulatory compliance, and consumer convenience. This chapter explores the fundamental need for packaging in the food industry, emphasizing how packaging contributes to the safety, longevity, and accessibility of food products. By examining the protection, preservation, distribution, and sustainability aspects of packaging, this chapter highlights its significance in modern food production and distribution systems. 2.1. Protection, Preservation

Synopsis

If the human being was born first, he or she needed food immediately to survive. Thereafter, human beings continued to need food and continued to eat food throughout his or her life. Hence, the relationship between human being and food is permanent and the requirement of food for the human being to be alive is everlasting. The paper provides the background, definition of right to food, and adequate food, historical events, legal perspectives, operational guidelines, and advances in its application and derives conclusion.

1. The Stability and Shelf-Life of Food

    1.    In the UK, the date coding to be used is determined by the total life of the product: for microbiologically highly perishable foods, a ‘use by’ date is needed, while for other foods, including foods with more than 18 months’ shelf-life, a ‘best before’ or a ‘best before end’ date is needed.

    2.    IFT (1974) definition of shelf-life, is : The period between manufacture and retail purchase of a food product during which the product is of satisfactory quality.

    3.    Shelf-life is defined as the time during which the food product will :

        i.    remain safe;
        ii.    be certain to retain desired sensory, chemical, physical and 
    microbiological characteristics;
        iii.    comply with any label declaration of nutritional data,

Permeability is a fundamental concept in food packaging, shaping the protective capabilities of packaging materials by determining the extent to which gases and vapors can move through them. This property plays a crucial role in preserving food freshness, safety, and quality by controlling the interaction between the food product and its surrounding environment. Understanding permeability is essential in designing packaging solutions tailored to the specific requirements of different food products, as improper permeability can lead to accelerated spoilage, nutrient degradation, and undesirable changes in texture and flavor. In this chapter, we explore the science of permeability in food packaging, breaking down its core principles, the behavior of different gases and vapors in various packaging materials, and the factors influencing permeability. Additionally, we examine how permeability impacts shelf life and consumer satisfaction, offering insights into selecting materials for specific food types. By understanding and manipulating permeability, food manufacturers can develop packaging that optimally balances protection and breathability, extending product shelf life and ensuring quality

Introduction

Therapeutic foods are products, which are multiutility food products that may be used as nutrition as well as medicine. A nutraceutical may be defined as a substance, which has physiological benefit or provides protection against chronic disease. Nutraceuticals are used to improve health, delay the aging process, prevent chronic diseases, increase life expectancy, or support the structure and/or function of the body. Oflate nutraceuticals are receiving considerable interest due to potential nutritional, safety and therapeutic effects. The examples of therapeutic foods are the foods used for feeding of malnourished children on an emergency basis or to supplement the diets of persons with special nutrition requirements, such as the elderly. Therapeutic foods can also form a part of treatment/prevention/reduction of other health conditions such as diabetes, cardiovascular disease, obesity, anaemia and any other lifestyle disorders.

The incidences of diet-related diseases are progressively increasing due to greater availability of calorie-rich foods and a sedentary lifestyle. Obesity, diabetes, atherosclerosis, and neurodegeneration are major diet-related diseases. Nutraceuticals and functional foods represent a novel therapeutic approach to prevent or attenuate diet-related diseases.

There is always a requirement for cheaper formulations using locally available ingredients that are processed in a safe, reliable, and financially sustainable methods. Some of the literature available on health foods for various diseases is summarized below. However, since the burden of diabetes in India is staggering. In 2017, 72 million cases of people suffering from diabetes were reported and the figures are expected to reach 134 million by 2025, this chapter more emphasis is given on the safe, natural treatment/reduction of diabetes by herbal means.

Introduction

It is the process of retaining food over a period of time without being contaminated by pathogenic organisms or chemicals and without losing its colour, texture, flavour and nutritious value. It involves preventing the growth of bacteria, fungi and other microorganisms, as well as retarding the oxidation of fats which causes rancidity.

Objective

• To increase its shelf life, retaining original nutritional values, colour, texture, and favour.

Abstract

Application of solar energy for drying of agricultural food products is one of the most attractive and cost-effective drying techniques. However, the intermittent nature of the solar energy is one of the major shortcomings of the solar drying system that can be alleviated by storing excess energy during the peak time and using it in off sun hours or when the direct availability of solar energy is inadequate. The use of sensible and latent heat storage systems in solar dryer is an effective way of storing thermal energy for drying purpose. This chapter will present information on different thermal energy storage (TES) materials, their advantages and disadvantages. The information available in the literature regarding the studies conducted on TES assisted solar drying systems is also covered in this chapter. In addition, some of the models that have been used by different researchers to test the performance of different TES materials are also reviewed.

Thermal preservation is among the most established methods for improving the safety and storage life of food. It uses controlled heating to destroy spoilage organisms and pathogens and to inactivate undesirable enzymes. Processing intensity varies according to the target microorganisms, food composition, packaging and required shelf life. Pasteurisation reduces pathogenic and spoilage microorganisms without achieving complete sterility, while sterilisation destroys more heat-resistant organisms and spores to produce commercially stable foods. Ultra-high-temperature processing combines very high temperatures with extremely short treatment periods. This chapter also discusses retort processing, thermal-death kinetics and microbial-inactivation models used to design safe processes while minimising nutritional and sensory damage.

Thermal processing also known as heat processing is commonly used processing method which helps in extending the shelf life of the food productswith high safety level, convenience and a healthy product.Seafood as a whole food is highly nutritious. Benefits to human health associated with the consumption of seafood is well recognized for multiple bodily organs and physiological functions but their high perishable nature is a concern. Seafoodundergoes spoilage due to autolytic, microbial action as well as oxidation of lipid. Proper handling and preservation is essential to maintain quality of fish. Heat processing is an age old preservation method practiced in many countries to extend the shelf life of food products. Heat treatment causes the destruction of microbes which increases the shelf life. There are number of thermal processing operations like- baking, blanching, canning, dehydration, extrusion, frying, pasteurization, sterilization, etc. All these operation serves various purposes and helps in manufacture of different food products.

Thermal processing is of utmost importance to low acid high water activity foods, where there are no hindrances to microbial growth. The proper delivery of heat is essential to cause the destruction of microbes to avoid food spoilage. In seafood’s processing, thermal processing through canning (retort pouch processing) is a common approach. In canning, the food is preserved by application of heat in hermetically sealed cans (pouches). Hermetic sealing means- complete airtight sealing. This prevents contamination from outside. Heating at very high temperature ranging from 110 to 135⁰C for a desirable time helps in killing all the vegetative forms of microorganisms as well as most heat resistant microbial spores. The amount of time needed for processing is different for each food type depends on hurdles present in the food and heat transfer characteristics. In thermal processing of seafood products, heat processing is aimed for the destruction of spores of Clostridium botulinum. A number of thermally processed ready-to-eat (RTE) products are available on market shelf.

INTRODUCTION

By the turn of the century, consumers have been more demanding, sophisticated and discretionary. They want much safer, higher quality, and more convenient to foods. The food processor need to get the best from their existing processing technology in addition to looking for newer ones. New and alternative food processing methods and/or novel combinations of existing methods are continually being investigated by the industry in pursuit of producing better quality foods more economically. Thermal processing is one of the most important food preservation techniques that was first introduced at the beginning of 1800 and has evolved itself in to one of the most scientific mature food processing techniques of recent times. Both science and technology have gone through tremendous transformation in the last two centuries and today it is the most reliable method to assure food safety and stability. Developments in thermal processing and evolution of non-thermal processing technologies like high pressure processing, pulsed electric field, pulsed light etc. have enhanced the utility of thermal processing principles and increased the awareness of possible alternative processing technologies.