eChapters

Cooking oil when heated there will be some changes like its colour, flavour, smoke formation etc. One change is the change in total polar compounds (TPC). TPC is used to measure the quality of oil. The TPC value increases with the reheating of oil, higher TPC value means the oil having high contain of peroxide and hydro peroxide. FSSAI fixed the value of TPC at 25%, beyond of this value the cooking oil can causes health issues like hypertension, atherosclerosis, Alzheimer’s disease , liver disease even liver cancer.

By definition, minimal processing would encompass any procedure, short of traditional complete preservation procedures (heat sterilization etc.) that adds value to the fruit or vegetables (Floros, 1993). Other terms used to refer minimally processed products are lightly processed, partially processed, fresh processed, fresh cut and prepared. Minimally processed fruits and vegetables are products those have the attributes of ‘fresh-like’ quality. A number of minimally processed products of fruits and vegetables are now being produced like peeled and sliced potatoes, shredded lettuce and cabbage, washed and trimmed spinach, chilled peach, mango, banana, melon and other fruit slices, vegetable snacks such as carrot and celery stick  and cauliflower and broccoli florets, packaged mixed salads, cleaned and diced onion, peeled and cored pineapple, fresh sauces, peeled citrus fruits and microwaveable fresh vegetable trays. Minimal processing of fruits and vegetables has two purposes. First, it is important to keep the product fresh but convenient without losing its nutritional quality. Second, the product should have a shelf life sufficient enough to facilitate distribution within the region of consumption. The microbiological, sensory and nutritional shelf life of minimally processed fruits and vegetables should be at least 4-7 days but preferably even longer (Ahvenainen, 2000).

India is known as the food basket of the world. It is the second largest producer of fruit till now after China, but its contribution to the Global market of fruit processing is just 1per cent. This is due to the fact that there is deficiency of skilled manpower, poor cold storage facilities, inefficient post-harvest management and minimal technological interventions.
Deficiency of the skilled manpower: In-spite of market size of US dollar 181 billion, expenditure on food and food products being 21per cent of India’s GDP and more than 31per cent share of wallet by consumers, there is resultant apprehension about the emergency emerging skill shortages due to mismatch between the demand for specific skills and available supply. Shortage of skilled, Semi- skilled and unskilled workers has emerged as a critical factor impacting the competitiveness of Indian food industry. Efficient man-power is one such critical element to improve to foster the growth. As the food industry advances and adopts various levels of automation the demand of skilled manpower will increase phenomenally. Hence if, the Indian food industry must achieve projected growth target set and become globally competitive, the need to develop and train the human resource efficiently would be essential.

1. Peeling: It is one of the integral parts of a food processing, and most agri-cultural crops need to be peeled to remove at the initial stage of food processing Peeling removes inedible portion (peel, seeds, and stalk) of fruits and vegetables. However, the susceptibility to spoilage increases due to acceleration of physiological process and the exposure of the tissues to microorganisms. The shelf-life and quality of fresh-cu produces could be compromised with the peeling.
The goals of optimum peeling operation are i. Minimizing product losses, ii. Types of products e.g., potato products, iii. Minimizing heat ring formation e.g., apple, potato, iv. Minimizing energy and chemical usage, v. Minimizing the environmental pollution.
Peeling operation can be grouped under following categories: Manual peeling (knife or blade), Mechanical peeling (abrasive devices, devices with drums, rollers, knives or blades and milling cutters), Chemical peeling, Enzymatic peeling, and Thermal peeling (Flame or dry heat peeling, steam or wet heat peeling, thermal blast peeling, and vapour explosion or vacuum peeling.

Food extrusion technology is a popular means of preparing snacks and ready-to-prepare food items. It is a method of size enlargement in which tiny granular food or powdered particles are strengthened into bigger parts with various forms, texture, color, etc. Extrusion cooking or thermoplastic extrusion is a common extrusion technology considered to be a process of HTST (high temperature, short time). It allows the manufacturing of a wide range of food products with little or no alteration of the fundamental equipment and adequate process control. Extrusion cooking is used for starchy and protein substances to make nutritious foods. Generally, such products are rich in calories and incorporation of protein rich fish improves its nutritional value. Most of the cereal-based extruded snacks were primarily made from maize, wheat and rice. However, these cereals (e.g. rice) have comparatively low protein content (6 - 8 g/100 g db) and an elevated amino acid profile in glutamic and aspartic acid, whereas lysine is the restricting amino acid. Therefore, it is recommended that protein food ingredient (e.g. fish) be added to the extruded snack products to develop nutrient rich diets.

Fish is considered to be great sources of protein of high dietary importance with a balanced profile of essential amino acids and lipids containing omega-3 fatty acids, in particular essential fatty acids such as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), respectively. EPA and DHA are very essential to normal growth and development. To avoid or moderate coronary artery disease, hypertension, diabetes, arthritis, other inflammatory and autoimmune illnesses, these vital fatty acids are discovered. The benefits of fish-based extruded products will assist in providing a big population in the nation like India with nutritious and balanced diets.

K ration: It is a lightweight packaged ration of emergency foods developed for the U.S. armed forces in World War II (Plate 215).

Kairomone: A chemical substance emitted by one species and especially an insect / plant that possess an adaptive benefit (stimulus for oviposition) to another species.

Kaiser rolls: A round crusty roll often used for sandwiches (Plate 216).

Kalamata/calamata: It is brine cured black olive grown in Greece.

Kallikrein: A hypotensive protease that liberates kinins from blood plasma proteins and is used therapeutically for vasodilation.

Kanji: Clean, black coloured, crisp and sound product of characteristic flavor prepared by full fermentation (chiefly lactic acid fermentation) of black carrot with 2.5% salt, 1% powder mustard and some amount of water.

Kaposi’s sarcoma: It is a neoplastic disease that occurs in individuals coinfected with HIV and a specific herpes virus (species Human herpesvirus 8 of the genus Rhadinovirus), that affects skin and mucous membranes, and is marked by pink to reddish-brown or bluish plaques, macules, papules, or nodules.

Introduction

Fisheries and aquaculture are important source of food, nutrition and livelihood for millions of people around the world. Aquaculture is the fastest growing food-production sector in the global aquaculture with production of 73.8 Million tonnes in 2014 (FAO, 2016) expanding into new directions, intensifying and diversifying. A persistent goal of global aquaculture is to maximize the efficiency of production to optimize profitability.

Infectious diseases pose of the most significant threats to successful aquaculture. Intensively cultured fish and shellfish are susceptible to infectious agents. The losses due to shrimp diseases in India is valued at Rs. 10, 221 million. Globally, the yield loss due to diseases in aquaculture is estimated to be $ 6 billion. A variety of antimicrobial and chemical treatments have been used for the control and treatment of bacterial diseases in aquaculture systems. The emergence of antimicrobial resistance in bacteria due to application of antibiotics in aquaculture and the toxic nature of chemicals led to the search for alternatives for the control of infection. Here, we discuss the several alternatives to antibiotics that have been successfully used in aquaculture.

FRUIT TOFFEES

Fruit toffees can be prepared from different fruits like apricot, plum, apple and other fruits. Concentrate the fruit pulp to about half of its volume by cooking with sugar and other ingredients. Milk powder should be added in the form of paste. Heavy stirring is required till it hardens enough on cooling.

EXPERIMENT

TECHNOLOGY FOR EXTRACTION OF KERNEL OIL FROM STONE FRUITS

Apricot, peach, plum, cherries, nectarines etc are the important stone fruits belonging to the family Rosaceae. These fruits are known to contain stones/pits i.e., apricot (6.0-11.5%), peach (7.5-11.5%), plum (4.5-7.0%) and these stones are reported to contain kernels (%) apricot (28.0-32.0%), peach (5.7-5.9%), plum (10.0-20.8%), almond (28.0-30.0%). These kernels can yield an oil yield of (42.5-45.5%), (38.5-41.5%), (39.2-40.6%) and (52.0-58.9%), respectively. Thus, these stone fruit kernels can be utilized for extraction of kernel oil by using the improved technology developed for extraction of oil. The developed technology consists of mechanical decortication of stones by the use of mechanical decorticator, kernel separation by using specific gravity separation technique, oil extraction by using table oil expeller and oil filtration through oil filter press followed by packing in PET bottles and PE pouches.

Mechanical decorticator: The mechanical decorticator is a type of roller crusher consisting of two rollers moving in inward opposite directions with the help of 3 HP motor and is provided with a hopper and feeder assembly. The clearance between two rollers is adjusted according to the respective size of stones.

Table oil expeller: Oil expeller is a 24 patti screw type oil expeller driven by 7HP motor, in which the kernels are fed into the moving hopper at pre-determined flow rate, which are pressed in between rollers (worm) and side walls of the expeller. The kernels are then, passed through the expeller 3-4 times until a thin slice of press cake is obtained.

Agriculture has been the base of human livelihood since ancient time when the man started planting of seeds of some edible plants now called Agricultural crops. Domestication of food plants and animals was started with the development of human civilization. Thus agriculture can be explained as science and technology of growing food crops and rearing of animals. Still in several countries of the world, most of population is based on agriculture for their livelihood particularly in rural areas of that country. According to Williams and Haq (2002) there are over 7000 species of plants that can be used for food. The edible plants species grown for food are called agricultural crops. The crops grown in garden are known as garden cops or Horticulture crops. Horticulture is a branch of agriculture, which deals with intensive cultivation of garden crops such as fruits, vegetables, f lowers, ornamental plants, plantation crops, spices, medicinal and aromatic plants, and mushroom. It also deals with post-harvest technology of horticultural crops. Processing and Preservation of fruits and vegetables is a part of Post-harvest Technology of horticultural crops which deals with methods of processing and preservation of these crops to extend the shelf life of fruits and vegetables after harvesting.

All horticultural crops have their own importance in our society. Fruits, vegetables and spices are major ingredients of our meal. Spices add taste and flavor to our food and also have high medicinal values. Flowers and ornamental plants are used for decoration of environment and landscape. Aromatic and plantation crops have become industrial crops. Mushroom growing is a great enterprise. Among these crops fruits and vegetables are major crops and have been considered presently as highly economical and important food crops. There are 1200 crop species are used for vegetable purpose in the world (Hazra and Som, 2006). Fruits and vegetables are richest and cheapest source of all essential nutrients (carbohydrates, fat, protein, vitamins and minerals) required by our body for proper functioning of body organs and maintaining good health. Besides these nutrients they also supply water and fibers to our body which play vital roles in our body. Fruits and vegetables have important place in our daily diet and based on survey made by experts FAO WHO (2003) has recommended 400 g/capita/day of fruit and vegetables (fruits -100 g/capita/day and vegetables -300 g/capita/day) to be consumed for good health and prevent chronic diseases. Therefore, the demand of these food commodities has increased in the modern society due to increased awareness of the nutritional importance of fruits and vegetables. So that people must be aware that what part of fruit and vegetable is to be consumed?

Enzymes are biocatalysts that change the rate of reaction without being changed themselves. All (Most) enzymes are proteins but all proteins are not enzymes. Ribonuclease is the enzyme which is non- protein in nature.

Properties of Enzymes

Before beginning the actual work on the establishment of a Fruit and Vegetable Processing Industry the following points should be considered:

Availability and possibilities of obtaining Funds: Investment of own money or obtaining loans from banks etc.

The scale of industry (Large, Small, Cottage or Home): Has to be decided based on availability of raw material, funds availability, land, labour and other resources.

The location: The processing unit should be located near to the actual production site of raw material so that the transportation costs of high bulk raw materials is reduced. There is no fun or justification of establishing apple processing industry in Lucknow or Bangalore and mango processing industry in Shimla as the related raw materials would have to be transported through long distances.

Site: Site selected in the location should be sunny area free from dampness and sufficient space for waste disposal should be ensured.

Onion is highly vulnerable to weed competition because of its slow early growth, shallow roots, narrow upright leaves and limited canopy development. Weeds compete for light, water, nutrients and space while also harbouring pests and pathogens. Severe infestation during the critical competition period can cause substantial yield reduction. This chapter describes major onion weeds and evaluates cultural, physical, mechanical, biological and chemical control methods. Timely planting, suitable spacing, mulching, raised beds, manual weeding, mechanical tools, herbicides and biological agents are discussed. Integrated Weed Management is recommended as a smart approach combining complementary methods to improve weed control, protect soil health and sustain onion productivity.

Chicory (Cichorium intybus L. var. sativum D.C.) plant is the herbaceous, perennial plant and supposed to have descended from the wild chicory (wild succory, blue sailors) which is often seen along roadsides with its blue flowers. The leaves are used as salads in human diet and other different purposes. They were reported to be stomachic (Baumann 1982, Franke, 1981) and their juice was used against eye disease and poisoning. The infusion of chicory was believed to be good for the liver, kidney and stomach. Initially the wild plant was used but since approximately 300 B.C., the crop was cultivated for this purpose. Beverages, soups and sauces made of chicory were reported to be used in Italy and Belgium as early in 16^th century.

For the first time, the root of chicory was used as a substitute of coffee in 1690 in Holland followed by many other countries like Sweden, France, etc. During 1806 and 1813, the cultivation and use of roasted roots of chicory as coffee substitute spread over the whole European continent. In the 19^th century, the main centres of cultivation of chicory were North-East France, Belgium, England, Russia, Holland and Australia. Subsequently it was raised on large scale in Poland, Hungary, Germany, Switzerland and India. Presently over 20% of the World’s consumption takes place in Eastern Europe, especially in Poland (6%) followed by Russia, Hungary, Romania, Czechoslovakia and East Germany. Twelve percent is reported to be consumed in South Africa, 9% in India and 2% in the United States (Clark and Macrae, 1987).

India is a leading producer and exporter of onion, but its productivity, market stability and post-harvest efficiency remain constrained. Farmers face fragmented holdings, climate uncertainty, price fluctuations, inadequate storage, technological gaps and significant post-harvest losses. This chapter reviews government programmes and policies related to financial support, irrigation, infrastructure, crop insurance, market access, farmer organizations, storage, processing and agricultural research. It also discusses export-quality requirements, grading, packaging and pesticide-residue standards. Research priorities include stress-resistant varieties and hybrids, drip irrigation, fertigation, growth regulation, sprout control and non-thermal storage treatments. Coordinated policies and technological dissemination can improve farmer income, productivity, quality and market resilience.

Food is a major determinant of health, nutritional status and productivity of the population. It is, therefore, essential that the food we consume is wholesome and safe. Unsafe food can lead to a large number of food-borne diseases. It is necessary that the food available is safe, hygienic, wholesome and its quality must be assured. Quality of foods can be defined as the ‘composite’ of those ‘characteristics’ that differentiate individuals units of a product and have significance in determining the degree of acceptability of that unit by the buyer. In general, the quality control is the maintenance of quality at levels and tolerance acceptable to the buyer, minimizing the cost for the vender. But, from the scientific angle the overall quality refer to technical, physical, chemical, microbiological, nutritional and sensory parameters to achieve the wholesome food. These quality factors depend on the specific attributes such as sensory properties, based on flavour, colour, aroma, taste, texture, quantitative properties viz. percentage of sugar, protein, fibre etc and hidden attributes like peroxide, free fatty acids, enzymes etc. Though quality attributes are many, not all need to be considered for a particular product. It is imported to determine how far relatively the factor is in relation to the total quality of the product.

Hence, the quality attributes of a particular is based on the composition of the product, expected deteriorate reaction, packaging used, shelf required and the type of the consumer i.e., deployed in terrain conditions or in peaceful situation. With the ultimate goal of protecting the consumer, quality standardization systems have come into force for regulating the gamut of operations in food manufacture. In a broader sense, food laws and Regulation cover the related acts affecting the marketing, production, labeling, food additives used, dietary supplements, enforcement of General Manufacturing Practice (GMP), Hazard analysis and critical Control Point (HACCP), federal laws and regulations, factory inspections and important-export inspections.

The food is considered as one of the essential for the maintenance of life. Manufacturing of the food product is not enough form the food industry. It is necessary that the food available is safe, hygienic; wholesomeness and its quality must be assured. The food industry is an important segment of industries in India and has its own peculiarities unlike other industries. Food processing industry has been recognized by government as a major sector of growth. It must be free from harmful additives, microbes and remain so for a period, it is intended to be consumed. Therefore, the methods employed in quality and food safety assurance programme within the food industry will vary considerably in accuracy and sophistication according to the type of process and size and nature of resources available. Since the international market has become demanding in terms of quality, safety and delivery, installation of Hazard Analysis Critical Control Point (HACCP) in food industry would provide a competitive edge to food supplies in the international market. Food control refers to all activities carried out to ensure the quality, safety and honest presentation of the food at all stages from primary production through processing and storage, to marketing and consumption. The term has been used to describe a total national effort involving an integrated approach between government and all segment and sectors of the food industry. Food control is linked to improvement in the health of the population, potential of a country’s economic development and reduction of spoilage and food losses.

A wide variety of quality determinants is employed, including size, colour, maturity and extent of blemishes. Quality is a measure of the degree of excellence or degree of acceptability by the consumer. The marketing of fresh fruit and vegetables is aimed eventually ay appealing to the consumer for whom tradition plays a major role in determining the acceptability of a food item. The eating habits of people are conservative. The increase of direct market from producer to supermarket chains is leading to the imposition of standards to predetermined specification by the supermarkets. Important factors in quality for the consumers are: appearance, including size, colour, shape, condition and absence of defects, texture, flavour and nutritional value. Quality is the ultimate criterion of the desirability of any food product to the consumer. The overall quality of food depends on the nutritional and other hidden attributes. Quality of foods can be defined as the ‘composite’ of the ‘characteristics’ that differentiate individual units of a product and have significance in determining the degree of acceptability of that unit by the buyer.

K ration: It is a lightweight packaged ration of emergency foods developed for the U.S. armed forces in World War II (Plate 371).

Kaiser rolls: A round crusty roll often used for sandwiches (Plate 372).

Kalamata /calamata: It is brine cured black olive grown in Greece.

Kamucha: Tea cider or fermented tea beverages is known as kamucha. The fermentation process take place by the presence of yeast and bacteria

Kanji: Clean, black coloured, crisp and sound product of characteristic flavor prepared by full fermentation (chiefly lactic acid fermentation) of black carrot with 2.5% salt, 1% powder mustard and some amount of water. It is fermented to make ready to serve drink which is known as Kanji. Each kilogram of the grated carrots yields just 7-8 litres of kanji.

Karl Fischer Titration: Karl Fischer Titration is used for estimation of moisture content of foods (low moisture products).

Kasseri cheese: The simple unpasteurized sheep’s milk cheese (sometimes mixed with goat’s milk) is called kasseri. It is popular in Greece. It is made in the shape of wheel, fairly firm and pale yellow (Plate 373). The word kasseri comes from the Turkish kasar which means that it has ability to hold its shape when heated.

U value: U value is a measure of the heat transmission through a building part (wall or window) or through a given thickness of a material (insulation). U values with lower numbers indicate better insulating properties (Plate 614).

UHT milk: This milk is homogenized, heated to atleast 135oC for about 2-3 second, cooled rapidly and then packed in sterilized containers aseptically. The milk in packs can be stored for several months without refrigeration. The nutrient loss is negligible. Used for making yogurt commercially as it does not need to be boiled again.

UHT pasteurization: The milk is heated to ~150oC for a fraction of seconds practically no holding period. It is also called ultra pasteurization.

UHT sterilization: It is method in which food is sterilized, cooled and then aseptically placed in previously sterilized containers which are subsequently sealed in an aseptic environment.

Naïve panel: It refers to the sensory evaluation panel that has not been trained specifically regarding the product evaluation being undertaken in the study.

Nano technology: It is the art of manipulating materials on an atomic or molecular scale to build microscopic devices. The word “ nano’ meaning ‘dwarf” in Greek language refers to dimension / magnitude of the material / particle in the order of 10⁹. Nanotechnology is nothing but manipulating of particles into very small particles called nano-particles. These particles have dimensions in the scale of nano-meter and used to design / build materials and devices. Nanotechnology has been provisionally defined as relating to materials, systems and processes which operate at a scale of 100 nanometers (nm) or less. It will allow many things to be manufactured at low cost and with no pollution. The concept of nanotechnology was first given by Nobel Laureate physicist Richard P. Feynman in Southern California in 1959.

NaNO_2: Pink colour of cured meat is preserved by NaNO₂. It is effective against Cl. Botulinosm

Nanogram: It is one billionth of a gram.