eChapters

Introduction Papaya fruit is listed under the family Caricaceae. This family has total four genera all over the world. There are about four species found in India under the Carica L. genus. Carica papaya L. is one of the species among them and it is most widely cultivated and very well-known species in India (Kumar and Devi, 2017). It has a thin, little shiny, and green-colored peel which turns into orange colored after ripening. The size of the fruit varies from 5.5 to 5.9 cm in terms of diameter. Papaya has several industrial applications in food processing, pharmaceutical as well as cosmetic industries. According to the FAO (Food and Agriculture Organization, 2013), India, Indonesia, Brazil, the Dominican Republic, Nigeria, and Mexico are the countries that produce the largest number of papayas in the world, India being the largest producer (4457.1 tonnes) followed by Brazil (1859.3 tonnes) in the year 2011.

Abstract

The natural color of foods is due primarily to carotenoids, anthocyanins, betanin and chlorophylls, either as inherent food constituents or as food or feed additives. These compounds have drawn considerable attention in recent years, not because of their coloring properties, but due to their potential health-promoting effects. Their occurrence and levels in foods, along with the factors that influence the composition, have been widely investigated. Processing effects have been actively studied. In spite of the intense search for plant and microbial sources and efforts to increase yield, few natural food color additives have reached the market. Developing new colors for the food industry is challenging, as colorants need to be compatible with a food flavors, safety, and nutritional value, and which ultimately have a minimal impact on the price of the product. In addition, food colorants should preferably be natural rather than synthetic compounds. Micro-organisms already produce industrially useful natural colorants such as carotenoids and anthocyanins. Microbial food colorants can be produced at scale at relatively low costs. This chapter highlights the significance of color in the food industry, why there is a need to shift to natural food colors compared to synthetic ones and how using microbial pigments as food colorants, instead of colors from other natural sources, is a preferable option.

1 Analysis of Cream

 Sample Preparation

Warm the cream sample to 40 - 50oC if the sample is very viscous. Then pour from one vessel to another 3 to 4 times to mix well. Sample should be tested daily and always within three days after collection since enzymatic deterioration of the cream will cause low tests.

1.1 Determination of Fat Content in Cream

 1.1.1 Gerber Method

 Introduction

Sulphuric acid is added to cream in order to dissolve the protein and other solids and create heat which liquefy and de-emulsify the fat. Iso-amyl alcohol is added to aid the separation of fat. Upon centrifugation, fat being lighter will be separated on top of solution in the cream butyrometer.

Enzymes (biological catalyst) can be defined as a substance which initiates or fastens the reaction rate, without being consumed during the reaction. Enzymes function as a catalyst in various biological processes taking place in all life forms. Although enzyme synthesis takes place inside living cells, they can even function as a catalyst in the in vitro processes, which makes it suitable for many industrial applications. For product formation in any chemical reaction, reactants or substrates has to overcome the transition state.

Abstract

In biocatalysis, isolated enzymes, enzyme mixtures, immobilized enzymes or microbes (enzymes that are still present within the living cells) are used to perform chemical transformation of organic compounds into novel compounds. Both in academia and across chemical and pharmaceutical industry, biocatalysts are used as isolated preparations or in whole cell format or as recombinant proteins produced in alternate host cells. Biocatalysts catalyze novel small molecule transformations that are usually difficult or impossible using traditional synthetic organic chemistry. Biocatalysts exhibit high chemoselectivity, regioselectivity, diastereoselectivity and enantioselectivity towards their substrates. As a result, the use of biocatalysts during chemoenzymatic synthesis minimizes the issues of unwanted side-reactions such as decomposition, isomerization, racemization and rearrangement. The process of biocatalysis has become an important tool in the synthesis of active pharmaceutical ingredients (APIs) and enantiopure compounds. Biocatalysis offers a more sustainable, efficient, and less polluting methods for the production of APIs and advanced pharmaceutical intermediates. Biocatalysts have received tremendous attention in pharmaceutical industry because they typically catalyze reactions under mild conditions, so they do not consume much energy or emit much greenhouse gas. Biocatalysts are currently employed for the development of products in different fields, such as pharmaceuticals or intermediates of their production (e.g., antibiotics, statins, and enantiopure building blocks), fine chemicals (e.g., amino acids and vitamins), and food ingredients (e.g., sweeteners, lipids, and nutraceuticals). However, it would be helpful for the pharmaceutical industry to take advantage of developments in biochemistry, molecular cloning, random and site-directed mutagenesis, advanced tools for enzyme discovery, enzyme-directed evolution, high-throughput laboratory evolution techniques for biocatalyst optimization, immobilization, and fermentation technology to gain access to a new class of biocatalysts (enzymes), cells and other microbes.

Abstract

Fruits like orange (citrus sinensis), mango (mangifera indica), banana (musa paradisiaca), guava (psidium guajava) and pomegranate (punica granatum) contain numerous vitamins, minerals, fibre. These fruits also contain phytochemicals, antioxidant and bioactive compounds including alkaloids, flavonoids, tannins, saponin, terpenoids, which enhance the nutritional value and reduce the free radicals and oxidative stress in human body. These fruits also show the anti-cancer, anti-bacterial, anti-fungal, anti-inflammatory, anti-arthritic, anti-obesity, anti- diabetic, anti-proliferative, anti-hypertensive properties and are very effective against the pathogenic bacteria, which causes the harmful disease in human body. The chapter provides the production data of these fruits in different countries, their bioactive compounds and their utilization in the pharmaceutical, cosmetic and food industries.

Abstract

Water is very essential nutrient and total of only 3% pure water is present on earth. Some natural, anthropogenic and human activities discharge wastes, containing heavy metals into the different water resources and ultimately destroying the ecosystem. Numbers of methods are used for water purification like conventional (includes physical and chemical) and biological. Conventional methods are expensive, generate large quantities of sludge and inefficient at low concentrations of metal. Biological method includes biosorption and bioaccumulation, are ecofriendly and economic and have advantages over conventional methods. Biosorbent material includes microbial biomass, agro-wastes, and industrial by-products are used to treat heavy metal from liquid samples. Actually these biosorbent have number of functional groups on their surfaces which help in binding of metal from aqueous solution. In this article, biosorption of zinc, arsenic and copper are described through lactic acid bacteria that are not harmful, nonsporulating, fastidious, fermentative and generally regarded as safe. Many of these species are probiotic and producing exopolysaccharides and biofilms. It has great resistance to survive in gut environment and efficiency to biosorb metal from gut. It has some significant characteristics that represent a useful tool for decontamination of food and beverages from heavy metals. Biosorption mechanism and factors behind the process make these strains competent of removing these heavy metals.

Abstract

Starch is an important plant-based product and an abundant biomaterial, used worldwide for different purposes in many industrial sectors including food, health, chemical and engineering sector. Starch versatility in industrial applications is largely defined by its physicochemical properties and functionality. Starch in its native form has limited functionality and application but advancements in technological processing have led to the wide-range modification of starch for different purposes. It can be easily degraded by microorganisms hence is a natural source of bioenergy in the form of bioethanol and biohydrogen as well as in the development of biodegradable packaging materials. Various technological interventions can significantly improve the characteristics of native starch and be tailor-made to the specific needs of the packaging and food industry. Native starch can be treated by various methods to modify its characteristics. Modification improves starch paste clarity, viscosity, syneresis and freeze-thaw stability leading to a wide range of food applications. Esterification lowers gelatinization temperature and retrogradation lowers the tendency to form gel and higher paste clarity which shows applications in refrigerated and frozen foods, as emulsion stabilizers and for encapsulation. Cross-linking increases the stability of granules towards swelling, high temperature, high shear, and acidic conditions. Starch-based nano-composite polymers have their application in coating and packaging of food as well as non food commodities. Techniques involving extrusion, casting, spinning, and nanotechnology can be used in the production of films, foams, and nanocomposite materials. Due to the unique characteristics of resistant starch, it is being used as a valuable supplement in the formulation of drugs, pharmaceuticals, various functional foods and in the microencapsulation of probiotics and bioactive compounds.

Abstract

Dietary fibre concentrates (DFC) are the major component of fruit by-products generated during the processing at commercial level. These are the blessings for human gut health along with many other positive health benefits. Fruit by-products are the so-called nuisance for the environment that enfolds numerous positive signs inside. Lignin, cellulose, hemicelluloses, pectin, waxes, mucilage’s, oligosaccharide, gums and many other associated compounds are the part of DFCs. These DFCs when taken in the form of functional ingredient reaches to the colonic microbiota and consequently provides them a healthy growth medium that promotes the cell metabolism upto 67%, enhances the growth of good gut bacteria like Bifidobacterium and Lactobacillus. This article enlightens the content of DFCs in various fruit by-products that shows their prebiotic potential.

Fourier transform infrared (FTIR) spectroscopy is one of the most effective methods for determining the functional groups and potential molecular interactions between membrane chemical molecules. Understanding of (infrared) IR absorption band placements in the spectrum as wave numbers can be used to identify the various chemical constituents (such as aromatic amides) that may not be visible by X-ray photoelectron spectroscopy.

Abstract

Enzyme is a highly efficient catalyst that is produced by active cells. When compared to chemical catalysts; enzymes have a number of benefits, including high specificity, high catalytic efficiency and flexible activity, all of which greatly help to promote their use in the pharmaceutical, chemical, and food sectors. The majority of enzymes such as protease, amylase, lipase and cellulase are relatively unstable and industrial uses are frequently restricted by a lack of long-term operational stability as well as the technically challenging recovery process and ruse of the enzyme. Enzyme immobilization provides an excellent base for increasing enzyme availability to the substrate with higher turnover over a long period of time. Enzyme immobilization are done by several methods and their performance are influenced by many factors. Physical and chemical based immobilization are the most commonly used methods. The matrix immobilizes the enzyme by holding it permanently or temporarily for a short stretch of time. The generally used matrixes for immobilizations includes natural, synthetic polymers and inorganic compounds.Currently, synergistic interactions of biotechnology and nanotechnology are useful for the development of immobilized enzymes. Enzyme immobilization is a commonly used technology in a variety of industries including food, pharmaceuticals, bioremediation, detergents, and textiles due to technical and economical advantages. This chapter focuses on most commonly used immobilized techniques in industry with many recent applications of immobilized enzymes.

Abstract

The waste utilization as derivative from different food processing sector has been emerged as the main challengeable problem around the world due to the generation of by-products at large quantities consisting seeds, peels, rags, unused flesh, bran, husk, germ, stalk etc. during various processing chain steps. Though these food by-products are potentially rich source of natural compounds which finds its wide utilization in different industries as affordable, cost-effective, novel ingredient comprising dietary fiber, phytochemicals, antioxidants, pectin, enzymes, organic acids, food additives, essential oils etc. subsequently after extractions, purified fractionation and fermentations methods. These food byproducts also have pharmaceutical and nutraceutical activity. A nutraceutical is like a medicine or food grade product, which not only provides physical benefits and nutritional supplements but also protects against various chronic diseases. This food processing waste utilization should be a topic of interest, by means of two ways, i.e., through waste quantity reduction and increased value-added food products production and also as renewable energy source. The purpose of this study is to highlight the opportunities to utilize food by-products from various food processing industries and to encourage the vital exploitation of the by-products containing large number of bio-active compounds having nutraceutical potential.

Abstract

Bioprocessing is much greener than chemical methods, since biocatalysts (enzymes or cells) involved are extremely selective, producing higher product yield with less or no by products, which are basically difficult to separate. Biotechnology can offer both economic and environmental benefits to the chemical industry and thus has great potential to achieve the sustainable production of existing and new products from renewable feedstocks. Fuel and energy production from biomass are major market sector for bioprocessing. They are considered in the manufacturing of biopharmaceuticals, food, food additives, chemicals, and several other products. Generally, a bioprocess involves feedstock pretreatment, fermentation or biocatalysis, and downstream processing for obtaining product and its purification. It is explored for the production of xylitol, fatty alcohol, butanol and biorefinery. Deep understanding of the process is required to create robust control strategy. Based on the requirements, sophisticated instrumentation and complex control laws or simple control law having intricate monitoring system can be selected. Supercritical fluids (SCFs) are advantageous for bioprocessing due to its transport properties, high diffusivity and low viscosity facilitate mass transfer phenomena, variation of pressure and/or temperature are adjusted providing high flexibility in the extraction of metabolites from cells. Microfluidic devices in which small amounts of fluids (10^-9 and 10^-18) are manipulated have emerged for high throughput applications. Automation of the optimization processes is enabled through microtiter plates with simplicity and operate with very small volumes. Therefore, more research is necessary to develop integrated processes that will allow combining one or more techniques to enhance bioprocessing at lower costs.

Abstract

Fermentation technology holds immense promise in diverse fields. It offers opportunities for sustainable biofuel production, allowing us to reduce our reliance on fossil fuels and promote a greener energy sector. In the pharmaceutical industry, fermentation plays a vital role in manufacturing antibiotics, enzymes, vaccines, and therapeutic proteins, paving the way for more efficient and cost-effective production processes. Furthermore, fermentation can be harnessed for waste management and environmental remediation, enabling the transformation of organic waste into valuable biogas. With ongoing advancements, fermentation technology continues to open new avenues for innovation and contribute to a more sustainable and environmentally conscious future. The present chapter compares types of fermentation process as well as gives an insight into various industrial prospects of fermentation technology.

Abstract

Fermentation in food processing is the process of converting carbohydrates to alcohol or organic acids using microorganisms; yeasts or bacteria under anaerobic conditions. Fermentation usually defines the desirable action of microorganism to enhance food safety by inhibition of pathogens, modify their sensory properties, improve their nutritional value by removing anti-nutritive compounds and by enhancing bioavailability of components. Pulses and Legumes are the major source of dietary nutrients all over the world. Fermentation can be the most simple and economical way of improving their nutritional value, sensory properties and functional qualities. Pulses and legume based fermented food products offer opportunities to include probiotics, prebiotics and fibers in the human diet. In the Indian subcontinent, making use of fermented food and beverages using local food crops and other biological resources is very common, although the nature of the products and the base material varies in different regions. This chapter focuses on some of the indigenous fermented foods produced in the country that have not received the scientific attention they deserve in the last decades. Products produced from different pulses and legumes substrates fermented by lactic acid bacteria, yeast and/or fungi are included.

Quality assurance is fundamental to producing safe, consistent, legally compliant, and commercially successful ice cream. This chapter presents a comprehensive QA framework covering supplier approval, incoming-material inspection, process monitoring, laboratory testing, microbiological control, sanitation, finished-product release, traceability, market quality, and corrective and preventive action. It explains the relationship between quality assurance, quality control, food safety, documentation, and management systems such as HACCP and ISO-based frameworks. The chapter also examines QA department structures, monthly reviews, audits, digitalization, quality culture, and performance indicators. By integrating prevention with measurement and accountability, the chapter demonstrates how effective QA can protect consumers, reduce losses, improve consistency, and strengthen profitability.

Abstract

Bioinformatics is an interdisciplinary field which plays a major role in various disciplines including drug discovery, pharmacogenomics, proteomics, comparative genomics, microbial genome applications in biotechnology. Food plays a vital role in various processes in body and also helps in controlling various chronic diseases. Food safety and food processing are very crucial factor for human lives. Bioinformatics has been successfully applied in food industry for improving various factors of food such as flavor, taste, allergenicity, probiotics, optimizing the quantitative and compositional parameters for food processing and assessing the food safety. In this chapter, we have given an overview about the role of bioinformatics in food industry.

This chapter introduces approaches for converting egg-processing residues and by-products into useful materials and products. It examines eggshell composition and applications, eggshell membrane and its biomedical and industrial potential, utilization of surplus and inedible egg material, and extraction of high-value components such as lysozyme and IgY. Waste management, sustainability and circular-economy approaches are also discussed. The chapter emphasizes that successful by-product utilization depends not only on technical feasibility but also on economics, scale, infrastructure, biosecurity and appropriate markets.

Introduction on Climate Smart Agriculture (CSA)

Extreme weather conditions like rainstorms, high wind pressures, high temperatures, flood and drought situations have profound influence on agriculture. Climate and agriculture are strongly interrelated universal processes and thus variations in climate influence agricultural activities (IPCC, 2007). The effects of climate change are seen in form of global warming, unseasonal and excess rainfall, and frequent natural calamities which affects agricultural production. At the same time emission of GHG to the atmosphere is a major source of climate change. The impact of climate change on crop yield, dairy and other livestock production including fishery will be felt in reduced production and consumption. Climate change will effect in additional increase in prices for main agricultural food crops such as rice, wheat, corn and soybeans (IFPRI, 2009).

Need for climate-smart agriculture strategy

Climate change has long-lasting and potentially detrimental consequences on the agriculture sector. Changes in weather events cause perturbations across agricultural ecosystems and have impact on farm productivity. Adopting the climate-smart agriculture approach has thus, become inevitable in order to build resilience in agriculture systems and cope up with climate change. With a view to implementing climate-smart agricultural practices to ensure climate resilience, certain broad strategies have to be adopted. The CSA approach is designed to identify and operationalize sustainable agricultural development within the explicit parameters of climate change (Climate Smart Agriculture Sourcebook.FAO.2013). It integrates the three dimensions of sustainable development (economic, social and environmental) by jointly addressing food security and climate challenges.

Agriculture and Food Security

Food security refers to a situation when people gain physical and access to enough food to meet the dietary requirements for a healthy life for all times. A household can have food security when all the members lead a hunger free life. It is estimated that nearly 800 million people in the world go to bed hungry every night. Food security exists when all people, at all times, have physical and economic access to sufficient, safe and nutritious food that meets their dietary needs and food preferences for an active and healthy life (World Food Summit, 1996). This definition gives rise to four dimensions of food security: availability of food, accessibility (economically and physically), utilization (the way it is used and assimilated by the human body) and stability of these three dimensions.

Climatic Factors and Crop Growth

Crop growth depends on internal and external factors. Internal factors are mostly genetic or hereditary factors which include high yielding ability, resistance to lodging, tolerance to adverse conditions such as drought, flood and salinity, tolerance to insect pests and diseases, and grain quality. The external factors include climate, edaphic, biotic, physiographic and socio-economic factors.

Modern agriculture requires certain precise information on pattern of rainfall, temperature, occurrence of drought and flood etc. for formulating required strategy for crop production. It also requires knowledge about agro-climatic conditions of the region for deciding a planned cropping pattern. Therefore climatic classification and delineation of agro-climatic zones would be imperative for a country or state.

Climatic factors like increase in temperature, carbon dioxide (CO₂) concentration, moisture, and other factors directly or indirectly affect agriculture, which have been elaborately dealt in previous chapters. Climate change causes weather variability that may result in low production, hike in price of agricultural commodities including food grains, vegetables, fruits, meat, egg and milk. It is now realised that climate resilient agriculture (CRA) will be imperative to reduce the vulnerability of agriculture to the climate change.

Climate-smart Agriculture Practices and Indicators

Considering the three pillars of climate-smart agriculture such as productivity, adaptation and mitigation, different technologies and practices have been evolved.

The CSA practices are grouped under soil and land management, water management, crop management, livestock management, forestry, fishery & aquaculture and energy management. The World Bank Group (2016) has suggested broad indicators of CSA practices (Table 7.1; Chapter 7)

Services for CSA

Under the CSA projects and programmes, the services like supply of inputs and technology transfer through extension services are provided to the farmers. The inputs like seeds of crops are provided by the input dealers at the subsidized rate and seedlings of fruits and vegetables are provided by both private and government agencies to grow under general cultivation and poly-house cultivation technology. Similarly other services like soil testing facilities, issue of soil health cards, construction of micro-irrigation projects and rain harvesting structures are made available to farmers. Under insurance scheme, loanee farmers are supported to pay premium dues for availing crop insurance facilities. Other services like trainings at various levels, demonstrations, exposure visits, exhibitions, kisan melas, field days, monitoring and evaluation of all these activities under these programmes are provided to the farmers with collaboration of extension officers.

Climate and Agriculture

Soil, climate and water are three basic requirements of a crop to be grown in a particular region. Climate affects the temperature trends, seasons, length of the growing season, amount of sunlight and the seasonality of sunlight etc. A change in climate may cause recurrent droughts, floods and weather extremities that would affect the agricultural production, human livelihoods, health and biodiversity. The relationship between agriculture and climate is complex as it is dependent on climate and also plays a contributing role in emission of greenhouse gas (GHG). Greenhouse gases include carbon dioxide, nitrous oxide, methane, chlorofluorocarbons (CFCs), hydro-chlorofluorocarbons (HCFCs), hydro-fluorocarbons (HFCs), per fluorocarbons (PFCs) etc. , which play a significant role in climate change.

Electricity is one of the fundamental phenomena of nature. Electricity or electric current is caused due to the movement of charged particles i.e., electrons. Due to the potential difference between two points in a conductor, electron movement takes place. The potential difference between two points is caused due to the difference in charge density. Electron tends to flow from lower potential to higher potential which causes electricity to flow. In general, the electrons flow from cathode (negative) to anode (positive) but in a wire electricity, electrons flow from anode to cathode when connected to a battery or any electricity source.

Weather and climate have profound influence on agriculture of a region. There are some differences between these two terms. Weather describes the state of the lower atmosphere of a place with respect to temperature, precipitation, wind direction, wind speed, humidity, cloudiness and pressure etc. over a short period of time. The short term variations over minutes to days are indicated as weather of a location. It says whether the atmosphere is hot or cold, rainy or dry, sunny or cloudy, still or cyclonic and so on usually for period of 24 hours. The weather may vary from place to place and from time to time due to difference in temperature, cloudiness, humidity, rain and other events of atmosphere. It may be sunny at one locality, but rainy at another locality.

1. Introduction

Extrusion of foods is an emerging technology for the food industries to process and market a large number of products of varying size, shape, texture and taste. Extrusion cooking of cereals is becoming more adaptive due to its various advantages over the traditional food processing techniques (White, 1994). Nowadays the extrusion of food is of major importance in the food-processing sector and it is the only process, which covers a wide range of food products such as ready to eat (RTE) breakfast cereals, snack foods, baby foods etc. Elaborate scientific research, technological development and engineering design, which have been done in this field so far, have led to large-scale industrial production. 

Abstract

This chapter presents the principle of fluidisation and its use in drying of food materials. Being a convective drying process, capacity and kinetics are limited by process conditions and material properties. The influences are discussed as well as presenting the main equations that describe drying in fluidised beds. The main focus lies on hot gas drying, additionally superheated steam drying as well as atmospheric fluidised bed freeze drying and microwave-assisted fluidised bed drying are presented and discussed.

Abstract

Mushrooms are the fruiting bodies of fungi, a group of organism that is different from fruits and vegetables. They are a rich source of good quality protein having more essential amino acids and vitamins with low calories. There are about six commonly known edible mushrooms throughout the world with button mushroom (Agaricus bisporous) being the most familiar and commercially important variety. Mushroom is a highly perishable product with a shelf life limiting to a few days. Soon after harvest, it starts to undergo physiological disorders like shriveling, wilting, liquefaction, browning, textural as well as weight losses and flavour changes. The main responsible factors for the quality deterioration after harvest are respiration rate, browning, bacterial spoilage of mushrooms, temperature and relative humidity. Because of its limited shelf life under ambient conditions of temperature and humidity, the preservation of mushrooms is a matter of concern. Various techniques have been involved in the extension of shelf life of mushrooms including chemical treatments, cooling, modified and controlled atmospheric storage, radiation, drying etc. Drying is one of the most accepted and effective methods for the long term storage of mushrooms. Mushrooms preserved by drying have a pleasant flavour and are used as an important ingredient in several food formulations including salads, instant soups, meats and rice dishes. Various drying processes like sun drying, hot air drying, freeze drying, vacuum drying etc. can be used for the long term storage of mushrooms. As mushrooms are sensitive to temperature, determining the right drying method is the key for the successful and effective operation of the system. The different operating conditions involved in various methods of drying affect product quality considerably. The effect of drying methods on the process and the quality of the dried mushroom is explained in detail in this chapter.

Abstract

Vitamin C is one of the most important phytochemicals and can be found in almost all fruits and vegetables. Since it covers almost all eventualities, being water solute and prone to leaching from cells, thermally labile (one of the most labile vitamins), pH-, metal ion-, light-sensitive, as well as readily oxidizable by ascorbic acid oxidase, vitamin C is selected as the most frequently measured nutrient to evaluate the nutrients loss during thermal processing. It is generally accepted that if vitamin C is well preserved, the other nutrients are also well retained. Higher retention of vitamin C in processed products is highly desired. Herein this chapter reviews the degradation mechanism and kinetics of vitamin C of fruits and vegetables during thermal processing, such as blanching, drying, cooking and frying. It starts with an overview of the functions of vitamin C in human’s health. Then the current status for understanding of the degradation kinetics of vitamin C during thermal processing was outlined, followed by the discussion of its degradation mechanism. At last, potential strategies or alternatives to keep vitamin C are identified and discussed.

Family : Euphorbiaceae

Flowering: July-September

Fruiting: September-December

Botanical description: The plant is a small erect herb, growing up to 60 cm or more. The ascending branches are angled and velvet-hairy. Leaves are broadly ovate, nearly triangular, rather coarsely toothed. Leaf stalks are as long as or longer than the 3-5 cm long blades. Flowers are stalkless, borne on erect axillary spikes longer than the leaves. Male flowers are minute, crowded distally. Female flowers are scattered along the inflorescence axis, each subtended by a conspicuous semicupular leaf-like toothed green bract nearly 7 mm long. Capsule is bristly and1 mm broad.

Ecology: It is mostly found in hot, low to medium altitude, sandy margins of rivers, seasonal water courses and pans, usually in shade of thickets, on rocky hillsides and often in disturbed ground and as a weed of cultivation.

Family : Amaranthaceae

Flowering : October-December

Fruiting : December-January

Botanical description

The plant is an erect, straggling or subscandant herb. The leaves are ovate, elliptic, obtuse, acute and finely attached to the stem on both sides. The flowers are greenish white in colour, bracteolate having membranous blade and seeds are reddish brown in colour, sub-cylindric at apex and rounded at the base.

Family : Rutaceae

Flowering: March-April

Fruiting: (Next Year) April-June

Botanical Description: The plant is a medium sized tree with spines of 1-2 cm long. The leaf is composed of three leaflets. The leaflets are oval, elliptic with 2.5-6.5 cm petiole, terminal one is larger. Flowers of the tree are white or greenish-white. The fruits are ovoid, hard and about 5-7.5 cm in diameter. The flowers appear during March-April and the tree bears fruits towards October, ripening in April.

Family : Amaranthaceae

Flowering: August-October

Fruiting: November-January

Botanical description: The plant is a perennial sub-erect, diffuse or prostrate herb, growing upto 0.3-2 meter high, branched from the base and often also from above. Stem and branches are densely woolly with whitish or yellowish, shaggy hairs. Leaves are alternately arranged, nearly circular to lanceo shaped-elliptic, wedge-shaped at the base, rounded to sharp at the tip. Flower spikes are stalkless, solitary or usually in clusters in leaf axils, silky white to creamy in colour, forming a long inflorescence leafy to the ultimate spikes.

Ecology: This plant is commonly found in open forests on mountain slopes, on waste and disturbed ground and coastal scrubs. The plant is widespread in drier parts of the tropics and subtropics.

Use: Leaves are collected, fried and then eaten

Family : Amaryllidaceae

Flowering: December-January

Fruiting: January-February

Botanical description: It is a herb. The leaves of the plants are cylindric, fistular and look like tubes. Flower of the plant is white or greenish white with a short pedicel.

Ecology: The plant is commonly cultivated along the river banks during winter season. The plant loves to grow in sandy and loamy soil.

Use: Young leaves and shoots are collected, fried then eaten. The leaves and the flowering stalks are used for various preparations and curries.

Family : Amaryllidaceae

Flowering: November-December

Fruiting: January-February

Botanical description: The plant is a herb. The leaves of the plants are flat, linear with sheaths, about half of their length. Flower of the plant is white or greenish white with a short pedicel. The plant is having bulbs with membranous outer scales in the axils of which do exist 10-12 lesser bulbs.

English Name: Node Flower Allmaina

Family: Amaranthaceae

Flowering: May-June

Fruiting: June-July

Botanical description: The plant is an annual herb. It is erect and rising, 10-50 cm tall. Stem is branched from or near the base. The Leaves are obovate, oblong, or linear with 1.5-6.5 mm long and 0.3-2.5 cm wide. Flowers of the plant are greenish or orange-red in colour with 3-7-flowered cymes. Seeds are single, black and shining with 1.5-2 mm in diam.

Ecology: The plant is a common weed widely distributed in forests and cultivated lands.

Family : Amaranthaceae

Flowering: Most part of the year

Fruiting: Year round

Botanical description: The plant is an evergreen creeper, herbaceous and perennial, growing up to 15 – 30 cm in height and spreading to form a growth mat about 45cm wide or more. Stems are prostrate or erect and moderately branched, hairless below, generally hairy above and in leaf-axils. The leaves are inverted-lanceolate or narrowly elliptic, acute at apex, narrowed at the base into a poorly defined petiole, mostly 2-6 cm long and 0.6-2.0 cm wide. Round or short-cylindrical flower heads lie stalkless in leaf axils, 5-10 mm long and 5-7 mm wide.

Use: Young leaves and shoots are collected, fried and eaten as green vegetables

Family: Amaranthaceae

Flowering: July-October

Fruiting: November-January

Botanical description: The plant is a perennial herb. The plant is a much branched prostrate herb, branches often purplish, frequently rooting at the lower nodes. The leaves are simple, opposite, somewhat fleshy, lanceolate, obtuse or subacute, glabrous and shortly petiolate. The flowers of the plant are small, white and in axillary clusters. Fruits are compressed obcordate utricles, with suborbicular seeds.

Family: Amaranthaceae

Flowering: November-December

Fruiting: January-March

Botanical description: The plant is a herb, reaches heights of over 1 meter tall with fleshy oval shaped leaves that are sometimes pointed at the tips. It is having a deep maroon colour in the center of the leaf with streaks of red, purple and green. The plant produces feathery purple, magenta or red flowers from the central stalk which is packed with edible seeds. The flower buds are edible, once they mature and become bushy.

Ecology: The plant is commonly used as leafy vegetables and cultivated throughout the country. The plant loves to grow in the sandy soil in winter season. It is also cultivated in left over potato fields.

Use: Leaves and young shoots are cut into small pieces, cooked with salt and chilly and then eaten. Sometimes the leaves and shoots are mixed with vegetables in cooking.

Family: Amaranthaceae

Flowering: June-August

Fruiting: September-November

Botanical description: The plant is an annual erect herb that grows upto 1 meter in height. The stem is grooved and often redish. The leaves are long-petioled, ovate or elliptic, acute or subacute with base shortly cuneate to attenuate. The flowers are in axillary and terminal red or green panicled spikes with up to 20 cm long. Seeds are black in colour, shining and compressed or subspherical with thick margin.

Ecology: The plant being commonly used as leafy vegetables, is cultivated throughout the country. The plant loves to grow in soil rich with organic materials. The plant is commonly cultivated in summer and it grows luxuriantly in rainy season.

Family: Amaranthaceae

Flowering: June-August

Fruiting: September-December

Botanical description: The plant is an annual herb with sometimes red tinged erect stems, sometimes ascending, 30-150 cm long, usually branched. The leaves are ovate to rhombic- ovate, elliptic, lanceolate-oblong, or lanceolate, blades 1-12 cm long, 0.89-6 cm wide and smooth. The stem and its branches carry spines. Flowers of the plant are green, and are in axillary clusters in the lower part of the plant and in unbranched or branched spikes in the upper part. The lower clusters are entirely without stamens as the lower flowers of the spikes, the upper flowers in the spikes are staminate. Seeds are dark brown or black in colour.

Family: Amaranthaceae

Flowering: June-August

Fruiting: September-December

Botanical descripion: The plant is an erect tropical annual herb with long-stalked leaves, growing up to 5 ft tall. The leaves grow up to 5 inch long, are notched or rounded at the tips. The flowers are whitish-green or red white, the seeds are very small, shining, black or red- brown in colour.

Family: Amaranthaceae

Flowering: Throughout the year

Fruiting: Throughout the year

Botanical description: The plant is an annual herb with erect stems growing upto 10-80 cm in height. The leaves are triangular-ovate to narrowly rhombic, 2-7 cm long, 1.5-5.5 cm wide, hairless, with a narrow and small narrow notch. The flowers of the plant are green, in slender, paniculate spikes, in leaf axils or at the end of branches. Fruit is nearly round, about 1.3-1.5 mm in size.

Ecology: The plant is a fairly common weed on waste ground and roadsides and distributed throughout India. The plant is also cultivated during summer season.

Use: Leaves and young shoots are collected, roasted and eaten

Family: Acanthaceae

Flowering: September-December

Fruiting: January-April

Botanical description: The plant is an erect annual herb extremely bitter in taste (all parts of the plant). It grows erect to a height of 1-4 ft. with dark stem. The leaves are glabrous, lanceolate, pinnate, with 8.0 cm long and 2.5 cm broad. Flowers of the plant are small, white-purple or spotted purple in colour, spreading axillary and terminal racemes or panicles and acute at both ends. Seeds numerous, sub quadrate and yellowish brown in colour.

Family: Araceae

Flowering: July-August

Fruiting: November

Botanical description: The plant is a herb, growing about 90 cm in height. It produces 2 - 3 leaves, 5 - 30cm or more in size with a flowering stem 30 - 50cm long. Leaflets are lanceolate, acuminate and oblique, uniting in an intramarginal nerve. Fruiting head 5 cm long, ovoid, berries are initially green clustered fruits finally ripening to bright red.

Family : Moraceae

Flowering: December-January

Fruiting: June-July

Botanical Description: The plant is an evergreen tree that grows up to 20-30 meter tall and 80-200 cm in diameter with evergreen, alternate, glossy and leathery leaves reaching up to 9 inch long. Leaves are oval on mature trees. All parts of the plant contain sticky and white latex. Inflorescence is solitary, borne axillary on special lateral short leafy shoots arising from older branches. Fruits are large arising from the tree trunk and weighting about 10-50 kg. the exterior of the fruit is green or yellow when riped and composed of numerous hard, cone like points attached to a thick and rubbery, pale yellow or whitish wall.