eChapters

Fragaria is a genus of flowering plants in the rose family, Rosaceae, commonly known as strawberries for their edible fruits. It is a low perennial creeping herb which is widely grown in temperate and subtropical regions of the world.

There are more than 20 described species and many hybrids and cultivars. Cultivated strawberries are based on two species, Fragaria chiloensis (L) Duch., native to the west coast of North America and Fragaria virginia Duch., native to eastern coast of North America. Hybrids of these two species are ancestors to all the modern strawberries. The most common strawberries grown commercially are cultivars of the garden strawberry, a hybrid known as Fragaria × ananassa. Strawberries have a taste that varies by cultivar, and ranges from quite sweet to rather tart. Strawberries are an important commercial fruit crop, widely grown in all temperate regions of the world.

The major producers of strawberries are USA, Mexico, Poland, Japan, Italy, Israel, Australia, New Zealand and Turkey. In India it was introduced during 1960’s and is grown to a limited extent in Jammu & Kashmir and Himachal Pradesh and some parts of southern India (Karnataka and Ooty).

Cultivars/Varieites: Tioga, Tufts, Surecrop, Fresno, Toro, Heidi, Hood, Northwest, Puget Beauty, Olympus, Ozark Beauty.

SYNOPSIS

In all probability the ancient farmer’s market originated on the streets of villages and later on, on the streets of towns. The street food survived through decades and centuries and now it has assumed its new role in fulfilling the readymade food demand of the working people of mega cities. The street food has now more relevance to the growing urban population. With the lapse of time and migration people to the cities, the business and activities of street food got expanded in qualitative and quantitative terms worldwide.

Street Foods-An Introduction

The National Policy on Urban Street Vendors (2004) defines street vendor as a person who offers goods for sale to the public without having a permanent built-up structure but with a temporary static structure or mobile stall (or head load). Street vendors may be stationary occupying space on the pavements or other public/private areas, or may be mobile in the sense that they move from place to place carrying their wares on push carts or cycles or baskets on their heads, or may sell their wares in moving trains and buses. The total number of street vendors in India has been estimated to be ten million and the number of street food vendors has increased sharply in the past few years (Bhowmik 2005).

The preparation and sale of street food is an age-old activity with historical roots and complex socio-economic and cultural implications. Street food vendors are mostly outside the regulation of the governments and unregistered thus making them an informal sector. Similar to most other informal sector enterprises street food operations too are carried out with minimal investment, infrastructure and as familial operations. Street food outlets are seen mushrooming at crowded public places like bus stands, cinema halls, market areas and parks. They operate as temporary structures or as pushcarts parked near the roadside or at pavements. Most street food vendors operate their food stands alone and are able to generate sufficient income for sustenance.

Structure

Structural unit of edible portion of most fruits and vegetables is the parenchyma cells and makes up bulk of cells. A parenchyma cell is rather thin walled and may be polygonal or cubical in shape.  Walls of parenchyma cells in young plants are composed almost entirely of fibrils of cellulose. In parenchyma cells of plants actively metabolising protoplast portion represents only about 5% of total cell volume. This protoplast is rather film like and is pressed against cell wall by large water filled central vacuole.  Protoplast has inner and outer semi permeable membrane layers between which is confined cytoplasm and its nucleus. 

The word meat comes from the old english word mete, which referred to food in general. Most often this means the skeletal muscle and associated fat but it may also describe other edible tissues such as organs, livers, skin, brains, bone marrow, kidneys and lungs etc. In other words we can say meat is those animal tissues which are suitable for use as food by the man. It is composed of numerous types of tissues like muscle tissues, epithelial tissues and nervous tissues but the major component of meat is muscle. Particularly skeletal muscle is the principal source of muscle tissue in meat while smooth muscle contributes little to meat. The muscle and connective tissues are the major compositional components and contributes towards qualitative and quantitative characteristics of meat. Broadly muscle can be classified into striated and smooth muscles. Striated muscles have transverse band pattern as seen in skeletal and cardiac muscle. However, smooth muscles do not show such pattern and mainly found as a component of blood vessels.

This chapter introduces the biological structure and formation of the hen egg. It examines the shell, cuticle, shell membranes, albumen, yolk, vitelline membrane, chalazae and germinal disc and explains the functions of each component. The chapter also describes the reproductive system of the laying hen, oogenesis and the sequence and timing of egg formation within the oviduct. Comparative egg structures of other poultry species and shell pigmentation are discussed, along with shell ultrastructure and quantitative composition.

Size shape and Appearance of Bacterial cells

Bacteria vary significantly in their morphology, that is in their appearance. They range in size from 0.2 μm to1 μm in diameter and 1 μm to 10 μm in length. There are three basic shapes of cells :

1. Spherical

2. Rod-shaped

3. Spiral.

Abstract

This review presents an idea on the botanical description, medicinal properties and traditional usage of wild, edible and aromatic plant (Nymphaea alba) in the human nutrition. Nymphaea alba Lin, also known as the White Water lily, White Lotus, or Nenuphar is an aquatic flowering plant of the family Nymphaeaceae. Nymphaea is a weed in India and its production pretty much as good as water chest nut and Nelumbo nucifera. Its rhizome is rich in tannic acid, gallic acid, alkaloids, sterols, flavonoids, glycosides, hydrolysable tannins and high-molecular-weight polyphenolic compounds. It is used as associate aphrodisiac, anodyne, antiscrophulatic, astringent, cardiotonic, demulcent, sedative and antiinflammatory. Further, it conjointly produces calming and sedative effects upon the nervous system, and is beneficial within the treatment of sleep disorder, anxiety and similar disorders. Moreover, the content of starch in the rhizome is said to be 40%. Extensive work has been carried out on agronomic and phenotypic properties for most plants, but relatively little study has been carried out on the properties which are of direct technical and economic interest to competitive food and nonfood industry. Non-conventional food resources and their value addition have attracted attention in the recent yearsfor their potential use as functional ingredients in food formulations, besides food they have also been used for non-food applications. Moreover, Plants provide the predominant ingredients of medicines in most medical traditions. So, there is tremendous potential for the profitable industrial use of these medicinal plants and exploring them for further use. Keywords: Non-conventional food resources, Nymphaea alba, Rhizome.

Abstract

In the present study, a novel work on comparison of physico-chemical characterization and bacterial diversity of wheat straw compost and vermicomposting has been initiated in the tropical region. Wheat straw compost shows lesser pH, EC, TDS, Organic Carbon, Total Nitrogen and Total Phosphorus than vermicompost whereas there was an increase in Total Nitrogen, Total Phosphorus and Electrical Conductivity and a drop in the pH, TDS and Organic Carbon of the vermicompost as the composting progressed from 0, 3, 10, 17, 24 and 31 days. Strains of Bacillus spp. and Thermoactinomycetes were screened from the wheat straw compost, which are ecologically important and have commercial potential for enzyme production. These strains were able to degrade cellulose, hemicellulose and lignin and exhibited cellulase activity. Enterobacter aerogenes, Micrococcus luteus and E.coli were isolated from the gut of Eudrilis eugeniae which help in the transformation of biodegradable waste materials into valuable compost.

Abstract

Microencapsulation has found great applications in food business. However, the technology remains aloof from being fully exploited. Microcapsules offer food processors a way to shield sensitive food ingredients, mask or preserve flavours and aromas and conversion of volatile food components into easy-handled solid ingredients (like powders, capsules etc). A number of naturally occurring and synthetic polymeric materials have been identified so far that possess the entrapping property and are categorised as GRAS materials. Numerous techniques have been developed for using these entrapping materials to encapsulate the sensitive food ingredients. Controlled release of the food ingredients at proper place and right time could be therefore a key practicality that may be provided by microencapsulation. With strictly fine-tuned and stabilized release characteristic, this method adds worth to the merchandise. The areas of interest in this field include the development of alternative and inexpensive polymers that may be considered natural or mimic the properties of natural polymeric materials, like Gum Arabic, Gellan Gum, Gum Karaya, Gaur Gum and Gum Acacia. Limitations in many of the encapsulation techniques have occurred due to high value of raw materials and production. This review is effectively committed to the, properties of encapsulating agents along with the emphasis on different techniques used for encapsulation in the varied fields like food technology, pharmaceutical, commercial engineering and biotechnology.

Introduction
Microbiology techniques are used for various objectives like:
• To observe and isolate the micro-flora
• To test the microbiological quality of various food and dairy products
• To find the presence of any particular pathogenic microorganism
• To maintain a pure or mixed culture of specific microorganisms
1. Serial Dilution Techniques
• Bacteria are often present in such huge numbers that they can be difficult to count. Yet accurate counts are necessary for a variety of reasons like, for instance, assessing the quality of water or the safety of food. There are a number of counting techniques but most rely on the dilution of the sample to reduce the bacterial numbers down to a quantity that can be counted accurately.
• All bacterial plate count methods require the sample to be serially diluted until an estimated count of 30-300 colony forming units (CFU) on the plate is obtained. Plates with more than 300 CFU are very difficult to count. Plates with less than 30 CFU are not statistically reliable.
• If turbidity is observed in a broth culture, it might have millions more bacteria than you need. If this turbid broth is used directly for plating, all the CFU would grow together into a confluent mass and we would not be able to distinguish one colony from another.

Introduction
A) Cultivation of Fungi
A fungus is any member of the group of eukaryotic organisms that includes microorganisms such as yeasts and molds, as well as the more familiar mushrooms. These organisms are classified as a kingdom, Fungi, which is separate from the other eukaryotic life kingdoms of plants and animals. A characteristic that places fungi in a different kingdom from plants, bacteria, and some protests is chitin in their cell walls. Similar to animals, fungi are heterotrophy; they acquire their food by absorbing dissolved molecules, typically by secreting digestive enzymes into their environment. Fungi do not photosynthesize. Growth is their means of mobility, except for spores (a few of which are flagellated), which may travel through the air or water. Fungi are the principal decomposers in ecological systems. These and other differences place fungi in a single group of related organisms, named the Eumycota (true fungi or Eumycetes), which share a common ancestor (form a monophyleticgroup), an interpretation that is also strongly supported by molecular phylogenetics. This fungal group is distinct from the structurally similar myxomycetes (slime molds) and oomycetes (water molds). The discipline of biology devoted to the study of fungi is known as mycology. In the past, mycology was regarded as a branch of botany, although now known fungi are genetically more closely related to animals than to plants.

Introduction

Cotton is a fiber crop of Malvaceous family. There are four cultivated species of cotton viz. Gossypium arboreum, G. herbaceum, G. hirsutum and G. barbadense out of which G. hirsutum is the predominant species contributing about 90% to the global production. In India all the above four cultivated species are grown on commercial scale as a kharif crop. India is the largest producer as well as consumer of cotton in the world. The major cotton growing states of India are Maharashtra, Punjab, Haryana, Rajasthan, Uttar Pradesh, Madhya Pradesh, Gujarat and parts of Andhra Pradesh & Karnataka. In Odisha cotton cultivation is an up-coming activity. Many of the western belt farmers, mainly from Rayagada, Bolangir, Kalahandi, Nabarangpur, and Nuapara districts have been taking cultivation of this cash crop. According to the report of Odisha economic survey, 2018-19 a total of 1.45 lakh ha area was cultivated in 2017-18 producing 3.65lakh bales of cotton. In Rayagada district cotton is cultivated in 9 blocks out of 11 blocks comprising an area of 35170 ha. For the year 2018-19 yield was 12.37 q/ha with production of 25.6 MT of cotton according to the data given by District agriculture office, Rayagada.

(A) Effect of Temperature
Introduction
Temperature is one of the most important physical factors affecting microorganisms. Bacteria are different from higher plants and animals in the lack of homeostatic mechanism and cannot regulate heat generated by metabolism and are, therefore, directly and readily affected by temperature. Over a limited temperature range, there is a two-fold increase in the rate of enzyme catalyzed reaction for every 10°C rise in temperature.
Bacteria may be divided into three major groups with respect to their temperature requirements: (i) Psychrophiles, those with optimum temperature between 0°C and 20°C; (ii) Mesophiles, with optimum temperature between 20ºC and 40°C and (iii) Thermophiles, with optimum temperature between 40°C and 80°C. Thermophiles are of two types: (a) Facultative thermophiles with an optimum temperature of growth between 45°C and 60°C and (b) Obligate thermophiles with optimum temperature above 60°C. Temperatures in the range between 50°C and 100°C are normally in the lethal range for bacterial cells and spores. The range of temperature preferred by bacteria is genetically determined, resulting in enzymes with different temperature requirements.
Each organism grows within a particular temperature range (i.e. cardinal temperature points). The minimum growth temperature is the lowest temperature at which growth of a species will occur. The highest temperature at which a species can grow is its maximum growth temperature, and a species grows fastest at its optimum growth temperature.  Time of exposure is a vital factor in assessing the

9.1 Introduction

Depleting natural resources, regulations on synthetic material, growing environmental awareness and economic considerations today happens to be major driving force for utilization of wastes from the agricultural crops and their residues throughout world [1]. These challenges have led to the introduction of sustainable waste management practices via optimization of processing technologies for minimization and creative conversion of the plant and the processing industries biowastes the world over [2,3,4,5]. Although world prices for sugar and petroleum products have shown spectacular variations during the last few decades, the long term outlook is very likely to be a continuous increase in the price of all fossil fuels and stagnation, at best, for the price of sugar [6]. This gloomy prospect led to the renewed interest in the wastes of the sugarcane industry during the last 50 years and has proved that the optimal use of wastes can provide not only a non-negligible support to the sugarcane industry but will also be able to redress the difficult situation sugar is presently experiencing [7]. Reliable statistics are not available to show the detailed end uses of these wastes on a world basis, but from a very rough picture of their trade, we can say that the wastes from the sugar and jaggery industry serve to be amongst the richest bioresource in this era of recycling of biowastes for renewable wealth generation [8].

Pure sugar when heated melts at about 160-1800c. at about 2100c sucrose loses water and becomes caramel.

CARBOHYDRATES AND SUGARS

Carbohydrates which include sugars and starches are among the most important of the food stuffs as well as the simplest of organic foods. They may be divided into three groups.

Group – I

Monosaccharides  : These are simple sugars that cannot be split into any simpler forms. The principal ones are glucose or dextrose, fructose and galactose. Glucose sometimes known as dextrose or grape sugar is found widely distributed in nature, especially in fruits and vegetables, and is one of the main constuents of honey.

It is in the form of glucose that sugar appears in the blood and is being burned continuously to produce energy. A certain amount of surplus glucose is absorbed from the digestive tract and stored in the liver as glycogen, which can be converted back into glucose when the need for more fuel arises. In the presence of yeasts, glucose undergoes fermentation and changes into alcohol.

In fruits, vegetables, and their products, the sugars are estimated as reducing sugars, non-reducing sugars, and total sugars. Reducing sugars in fruits and their products represent glucose and fructose. A combination of reducing and non-reducing sugars gives total sugars, whereas non-reducing sugars mainly sucrose are calculated after deducting the value of reducing sugars from the total sugars as invert sugar and multiplying the remainder with a factor of 0.95. Many fruit, vegetables, and their products like jam, jelly, juice, preserve, candy, fruit toffees, etc., containing substantial amounts of sugars, are estimated as a routine by using Lane and Eynon’s method using Fehling’s solution. However, for products having a smaller quantity of sugars, more precise methods like colorimetric methods can be used.
Method: Lane and Eynon’s Method
Principle: Invert sugar reduces the copper in Fehling’s solution to red, insoluble cuprous oxide. The sugar content in a food sample is estimated by determining the volume of the unknown sugar solution required to completely reduce a known volume of Fehling’s solution. Glucose, fructose and other] sugars capable of reducing oxidizing agents are called reducing sugars and this property is used for the estimation of sugars.

Sulphur dioxide is used as a preservative in many fruit and vegetable products. It can be added either in the form of potassium metabisulphite or by exposingthe product to sulphur fumigation by burning sulphur powder. Food safety and standards regulations have specified the maximum limit of sulphur dioxide in the finished products. Products having sulphur dioxide content exceeding the limit are considered not conforming to Indian Food Laws. Therefore, the estimation of sulphur dioxide in food products is considered an important attribute for quality evaluation.
Principle
Sulphur dioxide added to the food products may exist as undissociated sulphurous acid, as free bisulphite ions, as free sulphite ions and/or as combined SO2 in the form of hydroxy sulphonates. Sulphur dioxide is measured as free or total SO2.
Free SO2 is measured by direct titration with iodine. In the estimation of total SO2, the combined SO2 is liberated by treatment with excess alkali at room temperature, followed by subsequent acidification to prevent recombination and titration with iodine. The method used is known as the Modified Ripper Titration Method.

The contribution of dairy sector in the Indian economy has tremendous impact on the country’s GDP. India being the world’s highest milk producing country, dairy industry has a major role in changing the twin problem of the nation that is poverty and unemployment. Dairy sector also involves the under privileged group, especially the dairy farm women. There are many success stories regarding the life changing experiences gained by the farm women, who had taken dairy farming as a means to sustain their livelihood. In the area of gender equality, dairy sector has proved to be a women centric enterprise. Most of the activities pertaining to dairy farming are mostly carried out by the farm women. The dairy farming activities carried out by the farm women are tedious and in major cases their contribution remains unnoticed. They are usually carrying out activities, where most of their energy is drained, resulting in drudgery. Matters related to decision making, their opinion about adopting new technologies, starting an enterprise are not given importance by their family members. This leads to a greater setback in the emergence of success of dairy sector. Therefore, empowerment of farm women in dairy sector is one of the important criteria for the dairy industry to reach a greater height and for overall development of nation.