eChapters

1. Introduction

Foods are complex biologically and chemically active systems that require close monitoring of their manufacturing, distribution and storage conditions in order to maintain their nutritive value, safety and sensory qualities by suitable chemical. The determination of trace impurities in food system presents considerable difficulties owing to complexity as it contains thousands of major and minor compounds (Nilufer and Boyacio, 2002). The choice of the method of analysis depends on the sample, the analyte to be assayed, accuracy, limit of detection, cost and time to complete the analysis (Aboul- Eneim et al., 2000). The chemical methods employed for food analysis and quality control are generally time consuming and require tedious or destructive sample preparation. For development of the new detection method, emphasis should be on development of simplified, cost-effective and efficient procedures that complies with the legislative requirements (Stroka and Anklem, 2002; Enker, 2003).

The molecular spectroscopy is a fast, accurate, easy and non-destructive technique that can be used as a replacement of time-consuming methods. Near infrared (NIR) spectroscopy has proved to be a powerful analytical tool used in the agricultural, nutritional, petrochemical, textile and pharmaceutical industries (McGlone and others, 2002; Esteban-Diez and others, 2004). Infra red spectroscopy is based on the absorption of infra red light by the substance to be measured. This absorption excites molecular vibrations and rotations, which have frequencies that are the same as those in the infrared range of the electromagnetic spectrum (Pande and Mishra, 2015). This application uses a fiber optic coupled FT-NIR system operating in the 10,000 – 4,000 cm^-1 region in reflectance mode. It involves the analysis and quantification of molecular responses to introduced signals of known energy or frequency. All molecules (e.g. water, glucose, protein) have a definite amount of energy. When alternate energy (e.g. infrared radiation) is introduced, an energy exchange occurs between the introduced energy and the energy contained within the molecule. This is expressed as absorbance (energy is absorbed resulting in a loss of introduced energy), attenuated (energy is scattered resulting in a loss of introduced energy) or emitted (energy is released resulting in a gain on the introduced energy). As individual molecules and molecular groups (e.g. alcohols, nucleic acids, proteins, sugars and fats) have definite energy, by applying external energy of a known amount/type, one can structurally identify, quantify and even determine the natural state of these molecules within complex samples and mixtures.

1. Introduction

Movement of fluids from one location to another is an important unit operation in food processing. Various types of systems are used to convey fluids based on their flow behaviour. Understanding fluid flow behaviour is therefore important for designing of fluid flow systems. The fundamental mechanism involved in fluid flow is the momentum transfer occurring in moving fluids during various unit operations (fluid flow, aeration, drying, fluidization, filtration, centrifugation, sedimentation, mixing, etc.). This chapter deals with the basic concepts of fluid flow, viscosity, pressure measurement, conservation of mass and energy, boundary layer, momentum and velocity profile of fluid flowing in a pipe, flow metering devices, and pumps.

2.1. Introduction
The present century is the century of oxidative stress (OS) that linked to several life-threatening disorders which predominantly affect public health as well as their nutritional status. Unhealthy lifestyle and eating pattern which is major concern for OS. The biological literature first used the phrase “oxidative stress (OS)” in 1970. OS can be defined as a state of imbalance condition between the high level of pro-oxidants and the low level of antioxidant scavenging capacity in the body. The normal oxidative process that occurs in cells is crucial for the existence of life and favours the death of a cell. Free radicals, which are unstable, can form when molecular oxygen breaks up into pairs. This unstable radical has a high level of reactivity and produces reactive molecular species like reactive oxygen species (ROS) and reactive nitrogen species (RNS). To resist the OS and to maintain the redox balance, cells have an inbuilt antioxidant defence capacity, comprising of superoxide dismutase (SOD), catalase (CAT), and glutathione peroxidase (GPOD) etc. But some pathogenic or environmental conditions may overpower this antioxidant defence system, allowing a portion of reactive oxygen and nitrogen species (RONS) to bypass degradation and create much more reactive radicals. Increased ROS and RNS affect redox balance and damage DNA, proteins, amino acids, and fats, causing alteration of structures as well as action of cells and tissues. This will ultimately produce several pathogenetic elements associated with clinical situations and leads to the development of human aging and numerous diseases. Several dietary components such as whole grains, nuts, fruits, and vegetables are excellent sources of antioxidative vitamins, minerals, nutraceuticals or phytoceuticals that shields the human body from the harmful oxidative injury by scavenging or destruction of free radicals and also by upregulation of endogenous antioxidant defence system. Thereby long-term and sustainable OS remedies can be performed.

In the last decade or so, the problem of determining the microbial content and their activities in dairy products has been under close scrutiny. The dairy industries still adopt the dye reduction test because it is cheap, simple and satisfactory. However, other new techniques have been introduced along with some modifications in traditional tests. The microbiological quality must be maintained. To assess the bacterial content and their activities in dairy products, various methods are available for the microbiological testing of milk. The specific tests should be chosen as per the application and other factors like cost etc. On the basis of public health and economic consideration it is necessary to test microbiological quality of milk at a number of points along the chain from producer to consumer which includes - raw milk supply, bulk milk arriving at processors premises, monitoring bulk milk during storage prior to processing and monitoring the procession & the quality control of finished products. The techniques for estimating bacterial numbers in raw material are divided into two categories.

Food is essential for human survival. It provides the required energy and vital nutrients for sustainable growth and development. With the increase in population and awareness, the demand for nutritious, fresh and healthy food also increases. Although adequate food is produced in order to meet the increased demands, it fails to reach the consumers in need due to food Food Storage and Preservation Practices   35 wastage and spoilage occurring during various stages of harvesting, food production, storage and transportation. Gajanana et al., (2009) stated that there is a mammoth wastage of food post-harvest. It is estimated that 20 to 60 % of produce are wasted during and after post-harvest. 

Abstract

Genomics is playing an increasing role in generating new tools and databases with the rapid advances in genome technology which increases the eficiency and precision of crop improvement. With the emergence of new high-throughput technologies like next-generation sequencing (NGS) and reduction in their costs are bringing many more plants within the range of genomic and post genomic data along with the integration of information from the related fields of transcriptomics, proteomics, metabolomics and phenomics. Translating the vast abundance data produced by genome technologies requires large generic databases which hold specific data types for a broad range of species, which act as a resource for the crop improvement. The development of custom bioinformatics tools and advanced databases has become an expanding challenge which systematically helps in storing, organizing, manipulating and analyzing large amounts of biological information computationally. In this review, we outline some recent advances in the features of plant genome databases and various platforms with the recent advances in technology.

1.    Evolutionary relationships between groups of organisms are determined using comparisons of

(a) Biochemical pathways

(b) Nucleotide sequences

(c) Structural features

(d) All of these

2.    The different bacterial species can be subdivided into

(a) Serovarieties

(b) Biovarietites

(c) Subspecies

(d) All of these

3.    Kingdom Prokaryotae include

(a) Bacteria

(b) Protozoa

(c) Fungi

(d) None of these

Introduction

Therapeutic foods are products, which are multiutility food products that may be used as nutrition as well as medicine. A nutraceutical may be defined as a substance, which has physiological benefit or provides protection against chronic disease. Nutraceuticals are used to improve health, delay the aging process, prevent chronic diseases, increase life expectancy, or support the structure and/or function of the body. Oflate nutraceuticals are receiving considerable interest due to potential nutritional, safety and therapeutic effects. The examples of therapeutic foods are the foods used for feeding of malnourished children on an emergency basis or to supplement the diets of persons with special nutrition requirements, such as the elderly. Therapeutic foods can also form a part of treatment/prevention/reduction of other health conditions such as diabetes, cardiovascular disease, obesity, anaemia and any other lifestyle disorders.

The incidences of diet-related diseases are progressively increasing due to greater availability of calorie-rich foods and a sedentary lifestyle. Obesity, diabetes, atherosclerosis, and neurodegeneration are major diet-related diseases. Nutraceuticals and functional foods represent a novel therapeutic approach to prevent or attenuate diet-related diseases.

There is always a requirement for cheaper formulations using locally available ingredients that are processed in a safe, reliable, and financially sustainable methods. Some of the literature available on health foods for various diseases is summarized below. However, since the burden of diabetes in India is staggering. In 2017, 72 million cases of people suffering from diabetes were reported and the figures are expected to reach 134 million by 2025, this chapter more emphasis is given on the safe, natural treatment/reduction of diabetes by herbal means.

1. Size reduction is also referred as

(a) Extraction

(b) Communication

(c) Leaching

(d) Distillation

2. Size reduction causes

(a) Decrease in the temperature of the product

(b) Increase in temperature of the product

(c) Increase in pressure

(d) Decrease in surface area

1.     Which of the following micro-organism is the most heat-resistant in low acid canned foods and its destruction is considered the criteria for successful heat processing?

(a) B.subtilis

(b) C.botulinum

(c) C.sporogenes

(d) B.mycoides

2.    D value represents

(a) Doubling time

(b) Generation time

(c) Decimal reduction time

(d) Decimal reduction temperature

1. INTRODUCTION

Amongst the common fermentations employed in food are alcoholic, lactic acid and acetic acid. Lactic acid fermentation is a potent tool of biopreservation of foods by the use of biological means i.e. microorganisms or their metabolites having antimicrobial action. It deals with the extension of storage life and increased safety of edible products by employing natural microflora or their antimicrobial products such as in food fermentation. Though many problems in food processing and microbiological safety of food have diminished, yet these are certainly not eliminated altogether. These include the likelihood of food-related illness and product spoilage in industrialized countries. The increasing consumption of pre-cooked food, prone to temperature abuse, are among the main causes of this scenario. The bacterial pathogens that account for many of these foodborne illness cases include Salmonella, Compylobacter jejuni, Escherichia coli 0157:H7, Listeria monocytogenes, Staphylococcus aureus, and Clostridium botulinum. Until now, approaches to seek improved food safety had relied heavily to find out more efficient chemical preservatives or on the application of more drastic physical treatments (e.g. high temperatures) of food processing. Nevertheless, these types of solutions do have some drawbacks also: the proven toxicity of some of the commonest used chemical preservatives (e.g. nitrites), the alteration of the sensory and nutritional properties of foods (thermal processing) especially recent consumer trends in purchasing and consumption, with demands for safe but minimally processed products without additives.

6.1 Introduction

In general, the terms drying and dehydration are interpreted as the removal of moisture from a food product. Removal of moisture from a food product offers an excellent protection against most common causes of food spoilage. The drying or dehydration process achieves such protection by reducing the moisture content of the food product to levels which are adequate to limit microbial growth or other adverse chemical reactions. During drying, heat and mass transfer occur simultaneously (Figure 6.1). Heat is transferred from the bulk gas phase (i.e. hot air used for drying) to the solid phase (i.e. food product to be dried), where part of it is utilized for vaporization and the remainder is taken up by the solid phase as sensible heat. Mass (i.e. moisture of food product) is transferred in the form of vapour through various resistances, first from the interior of the solid to the surface, then through vaporization at or near the surface and finally in transport of the vapour into bulk gas phase. Dehydration is the removal of moisture close to bone dry condition.

C - enamel can : The sulphur resistant lacquer is golden coloured and the can coated with it are called C-enamel can or sulphure resistant can, used for packing non acid products.

CA storage : Storage of commodities under gaseous atmosphere like gas storage, where the composition of atmosphere is controlled accurately. MA and CA differ only in degree of control and CA is more exact. These storage methods in combination with refrigeration markedly enhance storage life of fruit and vegetables.

Safe, wholesome and nutritious food is vital for sustenance, good health, food and nutritional security and augmentation of sustainable development of an individual. Also, safe food helps in the growth of the national economy and enhances the trade and tourism sector. Foods that are unsafe containing various kinds of microorganisms can cause chronic diseases or illnesses varying from diarrhea to cancer.

1.    Introduction
    
2.    Edible coatings used in Seafood Products
    2.1    Pre-dust
    2.2    Batter
    2.3    Breading
    
3.    The Coating Process
    3.1    Portioning
    3.2    Pre-dusting
    3.3    Application of batter
    3.4    Application of breading
    3.5    Pre-frying / Flash frying
    3.6    Freezing
    3.7    Packing and storage
    
4.    Coating Process Equipment
    4.1    Forming machine
    4.2    Pre-dusting machine
    4.3    Batter application equipment
    4.4    Breading application equipment
    4.5    Fryers
    4.6    Spiral freezers
    
5.    Coating Process Lines
    5.1     Single line breading system
    5.2     Tandem line breading system
    5.3     Tempura or batter-fry  Line breading system
    5.4     Tempura-Japanese Line breading system
    
6.    Coated Fishery Products
    6.1    Fish fingers
    6.2     Coated fish sillets
    6.3     Fish mince based coated products
    6.4     Coated shrimp products
    6.5     Coated squid products
    6.6     Coated bivalve products
    6.7     Crab claw balls
    
7.    Common Quality Problems Encountered during the Coating of Seafood
    7.1     Voids
    7.2     Blow off
    7.3     Pillowing
    7.4     Tailings
    
8.     Innovative Processes in the Production of Coated Products
    
References

C - enamel can: The sulphur resistant lacquer is golden coloured and the can coated with it are called C-enamel can or sulphure resistant can, used for packing non acid products (Plate 81).

CA storage: Storage of commodities under gaseous atmosphere like gas storage, where the composition of atmosphere is controlled accurately. MA and CA differ only in degree of control and CA is more exact. These storage methods in combination with refrigeration markedly enhance storage life of fruit and vegetables (Plate 82).

CAC: It stands for Codex Alimentarious commission (1962). It is a joint commission of FAO and WHO, comprising of 146 member countries. It ensures consumer food safety, establish fair practices in food trade and promote the development of international food standards. CAC make standards for food additives, veterinary drugs, pesticide residue and other miscellaneous substances that affect consumer safety. These are published in Codex Alimentarius.

Cacao: The dried partly fermented fatty seeds of Theobroma cacao of the family Sterculiaceae that are used in making cocoa, chocolate, and cocoa butter called also cacao bean (Plate 83).

CAD: CAD (computer-aided design) is the use of computer-based software to aid in design processes. CAD software is frequently used by different types of engineers and designers. CAD software can be used to create two-dimensional (2-D) drawings or three-dimensional (3-D) models (Plate 84).

Introduction

Agricultural production is necessary to fulfil nutritional requirements for human populations and global food security. The agricultural sector also forms the economic backbone of many low-income countries in which millions of farmers are employed (Anushka et al, 2022). However, managing agricultural production to achieve multiple objectives of providing food, supporting livelihoods and protecting biodiversity and forests is a challenge especially in tropical, low-income countries (Anushka et al, 2022). Usually, the growth in global agricultural production is largely driven by commercial and export oriented commodities. One such agricultural commodity that has high global demand is cashew (Anacardium occidentale L.). Cashew is presently cultivated in 33 countries including India in the world. Global land area for cashew cultivation between 1980 and 2018 has seen an eleven-fold increase from 526,250 ha to 5,972,724 ha (Anushka et al, 2022).

1. DEFINITIONS

Propagation : Propagation of plants may be defined as the controlled reproduction of plants by man to perpetuate selected individual or groups of individual plants which have specific value to him or it is the perpetuation of plants as independent units by means of seeds, bulbs, layers, cuttings, or grafts.

• Seed: A seed has been defined as a young plant packed ready to start growing when required.
• Apomixis: Development of seeds without the complete sexual process is known as apomixes and seed produced in this manner is called apomictic seeds.
• Seed dormancy: The embryo of the seed remains in inactive stage from the time of its development to the time it germinates. This failure of the embryo is termed as dormancy of the seed.
• After-ripening: Some seeds germinate fully when freshly harvested, but they germinate after a period of dry storage. The change taking place in such seeds are known as after- ripening.
• Embryo dormancy: Conditions existing within the embryo.
• After-ripening dormancy: Seeds fail to germinate when freshly harvested, but they germinate after a period of dry storage. Such seeds are known as after-ripening dormant seeds. This is due to the physiological changes taking place in embryo.

Abstract

Application of ultrasound is one of the most promising uses of novel technologies in food processing. Use of ultrasound at various stages of drying has resulted in significant decrease in drying time and improvement in quality characteristics of dried products. The chapter discusses the principle behind use of ultrasound, general application in food industry with detailed description of various drying processes and equipments assisted by ultrasound.

Introduction
Environmental science plays a critical role in understanding and addressing the complex interactions between human activities and the natural world. This chapter explores the intersection of environmental science and agriculture, emphasizing the importance of ecological balance for sustainable development. As agriculture continues to be a major driver of environmental change, understanding its impacts on ecosystems, biodiversity, and climate is crucial for developing strategies that promote sustainability.
The chapter begins by examining the environmental impacts of agriculture, including land degradation, deforestation, and pollution. It then explores agroecology and biodiversity, highlighting the importance of maintaining diverse ecosystems to support sustainable agricultural practices. Sustainable resource management is discussed as a key approach to conserving natural resources and minimizing the environmental footprint of agriculture.
Climate-smart agriculture, a modern concept that integrates environmental sustainability with agricultural productivity, is introduced as a solution to mitigate the effects of climate change while ensuring food security. The chapter also covers environmental regulations and policies, which are essential for guiding sustainable agricultural practices and protecting the environment.
As the chapter progresses, it delves into the importance of environmental science in food security, the impact of environmental factors on global warming, and various modern concepts in environmental science, including sustainable food systems, circular economy, and ecosystem-based approaches. The chapter concludes with a discussion on combating food security and global warming challenges through sustainable practices and policies.
Environmental science plays a crucial role in agriculture by studying the interactions between agricultural practices and the natural environment. This chapter explores various aspects of environmental science in agriculture, including the environmental impacts of agriculture, agroecology and biodiversity, sustainable resource management, climate-smart agriculture, and environmental regulations and policies. Agriculture and the environment are inherently interconnected, as agricultural practices have both direct and indirect impacts on the natural environment. Environmental science in agriculture aims to understand these impacts and develop sustainable practices that minimize negative environmental