eChapters

Highlights • Banana leather can be enriched with microencapsulated ? – 3 fatty acid for value addition. • Blanching can destroy more than 80% of vitamin C content. • Henderson and Pabis model can better predict the drying kinetics of banana leather. Introduction The ever increasing demand for functional foods having numerous health benefits has been an active research ground for the food scientists around the globe. Till date, many food products have been formulated to deliver functionalities by value addition with bioactive compounds (Carvalho Barros et al., 2020). These products have been extensively studied and proved to be beneficial, especially for elder age group against various metabolic syndrome and health complications. Functional foods are edible products fortified with compounds having additional health and safety benefits such as vitamins, minerals, and bioactive compounds (Granato et al., 2020). One such example of a nutritionally dense food product with the potential of fortification to meet certain health benefits is fruit leather.

1.    I deem it a singular honour to deliver Dr. Sen Memorial Lecture. Dr. Sen, who was both an administrator and a visionary, was instrumental for:

Most of the fruit, vegetables, and their products contain acid or a mixture of acids. These acids are mainly responsible for the tartness or sour taste. The level of acidity is estimated to measure the degree of tartness/sourness in the product.
Principle
Acidity in the sample is measured by titrating a known volume of sample against a standard alkali solution of known concentration using phenolphthalein as an indicator. The appearance of a light pink color indicates the endpoint of titration. However, for highly colored products like tomato sauce/ketchup, jamun juice, Rhododendron juice, mixed fruit jam, etc., accurate determination of endpoint may be difficult by using an indicator. Therefore, for such samples, acidity is measured by using electrometric methods i.e. titration to a predetermined pH value, or the sample is further diluted with distilled water to mask the interfering color. The level of titratable acidity is expressed in terms of the predominant acid. Different fruits, vegetables, and their products have different predominant acids. A list of some products having predominant acid is shown as under:

Materials Required

Cut flowers, 1000 ml conical flasks, scissor, tape, distilled water, chemicals, weighing balance, volumetric flasks, labels, thermometer (max. & min. type) and hygrometer. 

Procedure

    1.    Collect fresh spikes of flowers
    2.    Cut at the base keeping about 25-60 cm of the cut flowers stick (uniformly for each flower).
    3.    Prepare Pulsing/ Vase solutions.
    4.    Put the prepared flower spikes in labeled conical flasks containing different Pulsing/ Vase solutions (for a known period of time).
    5.    Record the weight of the spikes and other observations daily.
    6.    Record the temperature and relative humidity of the storage chamber daily.
    7.    Analyse the recorded data and draw conclusion about the best vase solutions for the selected cut flower.

Materials Required

Fruits/ vegetables, weighing balance, plastic crates, CFB boxes or other packaging material fruit pressure tester, hand refractometer, markers etc.

Procedure

    1.    Harvest the fruits
    2.    Subject them to various pre-treatments (as discussed in previous exercise).
    3.    Record their initial parameters i.e. weight, firmness, surface colour, TSS, rotting etc. 
    4.    Place properly packed commodity in storage alongwith a check under ambient conditions
    5.    Record the observations regarding changes in quality during storage
 

Materials Required

Fruits/vegetables, thermometer, refractometers, NaOH, Phenolphthalein, glassware, weighing balance, plastic crates for storage of commodity, water cooling facility.

Procedure

    1.    Harvest the fruit / vegetable
    2.    Count No. of unmarketable fruits in every 100 fruits harvested
    3.    Record the internal fruit temperature in about 5-10 randomly selected fruits with the help of a thermometer
    4.    Pre-cool the commodity in cold water (<5ºC), air or refrigerator till the temperature reaches near its optimum storage temperature
    5.    Record the internal fruit temperature
    6.    Record the time required to pre-cool the commodity
    7.    Keep the product for storage at ambient conditions alongwith control
    8.    Record the difference in the shelf life and quality during storage

Materials Required 

Fruits/vegetables, hand refractometers, fruit pressure tester, weighing balance, scale, chemicals and glassware required for analysis.

Procedure

    1.    Go to the orchard or vegetable field and collect samples of fruits and vegetables
    2.    Apply the specific maturity indices to the samples

Materials Required

Fruits/ vegetables, washing tanks/ containers, size grader, fruit waxes, packaging material, neem based fungicides etc. 

Procedure

    1.    Take available fruits or vegetables 
    2.    Wash them in plain water or chemical solution as told by the teacher
    3.    Shade dry the fruits / vegetables
    4.    Prepare suitable wax solution
    5.    Apply wax on to the fruits as told
    6.    Record the fruit weight before packing
    7.    Pack the fruits properly in the trays / boxes depending upon the type and purpose
    8.    Do curing if required 
    9.    Do pre-packaging, if desired
    10.    Label the package for desired information
    11.    Keep the fruits for storage
    12.    Record the observations pertaining to weight loss and rotting periodically depending upon the commodity and its shelf life.

A. Tomato and Tomato Products
Tomato though botanically a fruit is generally considered a vegetable because of how it is consumed. Commercial products from tomatoes include juice, puree, paste, ketchup, soup canned and dehydrated tomatoes. Processing of tomato is now practised from home scale level to large scale enterprise. As a semi-finished product, tomato puree is prepared on a small scale while at a large scale, tomato paste has gained commercial significance. Both puree and paste are used for the preparation of different finished products like ketchup, juice, soup etc. The method for preparation of these products is well standardized, however, some modifications concerning recipes are made in the processing plants owing to variations in the quality of the raw material. The methods for the preparation of different tomato products are discussed as under: -
I. Tomato Juice/Pulp
Tomato juice is an unconcentrated product consisting of a liquid with a substantial portion of the pulp, expressed from ripe tomatoes with or without the application of heat and the addition of salt. Tomato pulp/juice is the basic ingredient for the preparation of different tomato-based products such as tomato puree, paste, ketchup etc. Fully ripe tomatoes are used for the preparation of tomato juice/pulp. All green, blemished and overripe fruits should be rejected as they adversely affect the quality of the product. The juice obtained from overripe tomatoes is usually thin and unpleasant. The juice should be deep red in colour with a characteristic taste and flavour. The juice shall have about 0.4% acidity expressed as citric acid. Cane sugar (1%) is added to further improve the taste and flavour of the finished product.

Essentials for Quality Product Preparation

Plant ripened red tomatoes should be selected. Yellow and green fruits on processing yield dull colour and turn brown due to oxidation.

Never use iron equipment for processing. Lycopene oxidizes and turns brown when comes in contact with iron. It also forms black compounds with the tannins present in tomatoes or the spices which are used for product preparation.

Avoid prolonged heating and cool immediately to avoid over-cooking.

A broader definition of a tool is an entity used to interface between two or more domains that facilitates more effective action of one domain upon the other. The most basic tools are simple machines. For example, a crowbar simply functions as a lever. The further out from the pivot point, the more force is transmitted along the lever. A hammer typically interfaces between the operator’s hand and the nail the operator wishes to strike.
A telephone is a communication tool that interfaces between two people engaged in conversation at one level. And between each user and the communication network at another. It is in the domain of media and communications technology that a counterintuitive aspect of our relationships with our tools first began to gain popular recognition.
Marshall McLuhan famously said “We shape our tools. And then our tools shape us.” McLuhan was referring to the fact that our social practices co-evolve with our use of new tools and the refinements we make to existing tools.

1. Tyson Foods Inc. 
2210 W. Oaklawn Drive, Springdale, AR 72762-6999 
Phone  : 479-290-4000; Fax  : 479-290-4061; Web site  : www.tyson.com

Executives : Chairman : John Tyson; Pres./CEO : Richard Bond; SVP-Intl. Ops. : Mike Baker; SVP-Commodity Trading & Risk Management : Jean Mrha Beach; Group VP-Research & Development, Logistics & Tech Services : Hal Carper; SVP & CIO : Gary Cooper; Group VP & International Pres. : Rick Greubel Jr.; SVP, Controller & CAO : Craig Hart; VP, Assoc. General Counsel & Secretary : R. Read Hudson; Group VP-Ops : Donnie King; SVP-Human Resources : Ken Kimbro; EVP & CFO : Dennis Leatherby; Group VP-Food Service : Bernard Leonard; Sr. Group VP-Fresh Meats : James Lochner; SVP-External Relations : Archie Shaffer III; Group VP-Consumer Prods : Donnie Smith; EVP & General Counsel : David Van Bebber; SVP-Renewable Products : Jeff Webster; VP-Investor Relations & Asst. Secretary : Ruth Ann Wisener

Abstract
 
The definition of quality is described from a very simpler one “fitness for purpose or use” to a comprehensive “the totality of features and characteristics of a product or service that bear on its ability to satisfy stated or implied needs”. The concept of total quality management in food industry is adopted recently and it is the “integrated organization approach in delighting customer (both external and internal) by meeting their expectations on a continuous basis through everyone involved with the organization working on continuous improvement in all products/processes along with proper problem solving methodology”. TQM is concerned with the integration of all the efforts in organization towards quality improvement, quality development and quality maintenance to meet full customer satisfaction at economic levels. TQM enhances the work culture and employee’s satisfaction through participation and involvement and consequently the image of the organization.

Liberalized economies and evolving businessstrategies push variousindustries to achieve a competitive edge both in the domestic and international markets. Food industry especially, works on the bedrock of quality of products and services in order to attract and retain customers. In this new world of economic order, customers can select from wide range of products and services that are available in the market.

Measurements of sugars in the fruit can indicate the stage of maturity. Total soluble solid (TSS) contents can give a reliable measure of the sugar and other water-soluble components in fruits, vegetables, and their products such as juice, squash, jam, preserve, candy, sauce, ketchup, etc., In climacteric fruits, carbohydrates accumulate during maturation in the form of starch, and as the fruit ripens the starch is broken down into sugar. In non-climacteric fruits, sugar tends to accumulate during maturation. The presence of sugars, acid, ascorbic acid, and other water-soluble components in the fruit, vegetable, and their products are measured as total soluble solids.
Principle
Soluble solids can be determined using a refractometer which measures the refractive index or a brix hydrometer which measures specific gravity. A Brix hydrometer is used to determine the percentage of brix in syrup while an Abbe refractometer gives both refractive index as well as degree brix. The Refractive index of the test solution is measured at 20°C using a refractometer and the soluble solid content is calculated by the use of tables correlating the refractive index with soluble solids.

1. INTRODUCTION

Food is any substance consumed to provide nutritional support for the body. It is usually of plant or animal origin, and contains essential nutrients, such as carbohydrates, fats, proteins, vitamins, or minerals. The substance is ingested by an organism and assimilated by the organism’s cells in an effort to produce energy, maintain life, or stimulate growth. A food contains some non-nutrients, some of which may even have a detrimental influence on the consumers, while some may be inert and have no effect. Nature has endowed many plants with the capacity to synthesize a wide variety of chemical substances that are known to exert a deleterious effect when ingested by animals and are called as antimetabolites. These substances are also referred to as antinutritional factors when they are present in food/feedstuffs and influence a metabolic pathway when introduced into and/or eaten by an organism.

There is a wide distribution of biologically-active constituents throughout the plant kingdom, particularly in plants, used as animal feed stuff and as human food. The knowledge that these compounds elicit both toxic and advantageous biological responses has given rise to several investigations in recent times as to their possible physiological implications in various biological systems. It is well known that plants generally, contain antinutrients acquired from fertilizer and pesticides and several naturally-occurring chemicals. Some of these chemicals are known as ‘‘secondary metabolites’’ and they have been shown to be highly biologically active. They include saponins, tannins, flavonoids, alkaloids, trypsin (protease) inhibitors, oxalates, phytates, haemagluttinins (lectins), cyanogenic glycosides, cardiac glycosides, coumarins and gossypol and the list is inexhaustible. Some of these plant chemicals have been shown to be deleterious to health or evidently dis-advantageous to human and animal health, if consumed in appropriate amounts. Most of these secondary metabolites elicit very harmful biological responses, while others are widely applied in nutrition and as pharmacologically-active agents. The pharmacological and other beneficial effects of these antinutritional factors in plants have been reviewed here.

Trade in fruit and vegetable products has been among the most dynamic areas of national as well as international agricultural trade, stimulated by rising incomes and growing consumer interest in product variety, freshness, convenience, and year-round availability. Advances in production, postharvest handling, processing, and logistical technologies—along with increased levels of international investments have played a facilitating role.

4.1. Global Trade of Processed Fruits & Vegetables

4.1.1. Country Wise Trends of Export in Value-Added Fruits

Table 4.1 shows the processed fruits export of top 15 countries in the global market. The USA remained the largest exporter at global level with the exports valued at USD 15089573 thousand with a share of about 12 per cent. The Compound Annual Growth Rate (CAGR %) of the USA was noted 7.58 per cent. Spain is the second largest exporter of processed fruits and vegetables with the CAGR of 6.14 per cent and share of 8 per cent. Some other dominant exporting nations are namely, Mexico, Netherlands, China, and Chile, showing a CAGR nearly, 13 per cent, 11 per cent, 16 per cent and 9 per cent, respectively.

Cheese, butter, whole milk powder, and skimmed milk powder are a major part of the world’s dairy trade. The demand for worldwide dairy exports is highly concentrated. With a share of 12 per cent, New Zealand is the largest exporter of dairy products, followed by Germany, Netherlands, France and the US. Germany has been the world’s major dairy importer as well with a share of 10 per cent. Other large dairy product importers are China, Netherlands, France, Italy and Belgium.

Before 1999, India was a net importer of dairy products. The successful implementation of the ‘Operation Flood’ program and trade reforms caused the direction of India’s dairy trade to change marginally. India has been a net exporter of dairy products since 2000. Statistics show that India’s export share of dairy products over world dairy exports increased marginally from 0.1 per cent in 2001 to 0.5 per cent in 2019, while its import share of dairy products over world dairy imports increased marginally from 0.018 per cent in 2001 to 0.04 per cent in 2019. The Middle East, South Asia, South East Asia, and the USA are the major markets for India’s dairy products. Conversely, India is a favorable market for the European Union, New Zealand, Australia, UAE, and US dairy products.