eChapters

Introduction

Milk is regarded as the “ideal food” as it contains nutrients necessary for both newborns and adults (Azad & Ahmed, 2016). It is high in protein, fat, carbohydrates, vitamins, and minerals. Unfortunately, milk is easily adulterated all over the world for several reasons, including a gap between supply and demand, the inherent nature of milk which can imbibe many adulterants that are difficult to identify, the low purchasing power of consumers, an insufficient share of the organized sector in the dairy business, and, most importantly, a lack of efficient and rapid methods for detecting adulterants (Ellis et al., 2012; Moore et al., 2012).

3.1. Introduction
Sports nutrition is one of the areas of nutrition that closely coordinates with human anatomy research and the science of sports. The application of nutrition science to a practical daily eating plan intended to optimise the performance of athletes in competitive events, speed up the healing and reconstruction process following intense physical activity, and supply the energy for physical activity is known as sports nutrition. It also seeks to promote wellness and general health. Nutrition is strongly connected to fitness, specifically whilst sports activities are involved. It is necessary to recognize the physiology of the workout on the way to recognizing the specific metabolic pathways that coexist in the course of sports activities practice (O’Donoghue, 2014). Three things are necessary for athletic success: genetic endowments, level of training, and nutrition. It is impossible to change one’s genetic makeup. The most efficient method for enhancing athletic performance is specialized exercise training, and any kind of workout regimen must include adequate nutrition. The dietary requirements of athletes and workout aficionados are different from those of physically inactive people due to variations in their calorie needs as well as macro- and micro- nutrient needs. To achieve peak athletic performance, it is crucial to investigate and evaluate the dietary requirements of athletes prior to, during, and following the contest (Cotugnae et al., 2005). Exercises that improve one’s heart health involve swimming, jogging, and climbing. Other exercises that improve one’s flexibility, power, and endurance of muscles involve stretching and hard training with resistance. For example, if someone decides to choose to lose excess fat and to do so, they would design a regular exercise routine that incorporates all of the above-mentioned elements, as well as choosing more nutritious foods in the diet to meet the higher demands to endeavors. Athletic performance requires sports-related abilities. These neuromotor skills, such as balancing, pace, power, durability, stamina, agility, and execution, are particular to sports.

12.0. Introduction

The benefits of food laws to the consumers and the processing industries depend upon the efficacy with which the laws are implemented. The implementation of laws requires not only a well organized national infrastructure for inspection and quality control, but also requires reliable methods of analysis, that can be used to check the quality standards for improvement of the food product w.r.t. nutrition, safety and sensory attributes. Early and accurate analysis of food product prior to preservation, during preservation or post preservation is a crucial component for quality evaluation and their quality control. Quality control in food industries depends upon three principles viz. i) raw material control, ii) process control and iii) finished product inspection. Once a product has gone through the manufacturing process, little can be done to alter its quality or to overcome the faults. Examination of the finished product at the most represents analysis with respect to standards – to accept or reject. Effective control over the raw material and process minimizes the rejection of the products. The food spoilage can be managed most effectively, if control measures are introduced at an early stage of food preparation/contamination. Reliance on symptom is often not adequate because spoilage may occur before symptom appears. The spoilage of the food may affect sensory, physical, chemical or microbiological attributes. Therefore, now a day, food processors want to analyze their food samples quickly without any delay in shipment for which they have to depend on the different methods for their quality evaluation. The analysis and quality control of food products involve physical, chemical, microbiological and sensory methods. So, widely used standard procedures / methods for evaluation of quality of food prior to preservation, during preservation or post preservation has been given in this chapter for easy implementation.

1. Introduction

Food is processed for its preservation, hygienization or value addition. To date, the food preservation technologies such as canning, dehydration, freezing, pasteurization and controlled atmosphere and modified atmosphere packaging have been the main processes employed to preserve foods, with the use of antimicrobials and microwaves also being employed more recently. In future, however, technologies such as exposure to ionizing radiation, high pressure processing, ohmic heating and pulsed electric field processing, could potentially be the new alternatives to the above food preservation technologies.

Irradiation of food involves the exposing of food, either in prepacked form or as such to controlled doses of ionizing radiation being generated either by electrically driven machines such as electron beam accelerators, x-rays or gamma rays produced by radioactive isotopes such as CS-137,CO-60, to achieve certain desirable objectives. The process of exposing a range of food stuffs to specific doses of ionizing radiation is being used to extend the shelf life of food stuffs, to improve their overall safety and quality by eliminating pathogenic bacteria, by reducing number of food spoilage organisms, to reduce the bacterial load on herbs and spices and thereby making them safe to incorporate into food stuffs, to inhibit sprouting in stored tuber and bulb crops such as potatoes, onions and garlic, to disinfest grains, grain products and tropical fruits to prevent damage to the commodity and to meet the quarantine regulations(Arun Sharma, 2004, Farkas, 2006).

1.    Pasteurization can be used to destroy

(a) Soamtic cells

(b) Bacteria

(c) Antibiotics

(d) All of these

2.    The higher amount of total solids in milk will result in

(a) Increased heat stability

(b) Decreased heat stability

(c) Both (a) and (b)

(d) Decreased or increased heat stability depending upon temperature

1. Introduction

Mushrooms represent a highly specialized group of fungi, mostly basidiomycetes, with production of fruiting bodies bearing the spores for continued propogation. The fruiting bodies vary greatly in shape, size, color, texture, structure and aroma (Rajarathnam et al., 1998). They are endowed with the unique ability to biodegrade cellulosic wastes, including lignin, and biotransform into edible fruiting bodies (Rajarathnam et al., 1992, 1998, Rajarathnam and Zakia Bano, 1990). Their chemistry is also varied comprising characteristic polysaccharides, phenolics, proteins, amino acids, peptides, lectins, fatty acids, minerals, and so on (Rajarathnam et al., 1998). The wide spectrum of compounds have endowed the mushroom species with a spectrum of biofunctional activities of medicinal importance and accordingly their role in human health are implicated through studies on chemical, cell culture and animal feeding experiments. Vast literature available on this subject is condensed for presentation here.
Fifty nine medicinal species are reported from Diaoluoshan Nature Reserve in Hainan Province, China (Li et al., 2003). A health food made from luminescent mushrooms (Mycena chlorophos) is described. The luminescent parts that emit light in the carpophore of the mushrooms are dried without thermal decomposition and pulverized (Sugimoto, 2006). Consideration is given to the health promoting properties of 3 types of Asian fungi, namely, shiitake (Lentinus edodes), reishi (Ganoderma lucidum) and maitake (Grifola frondosa). Properties considered include beneficial components (e.g polysaccharides, vitamins, amino acids) and effects on the immune system (Anon, 1997). Auricularia auricula (kikurage or tree-ear) and Tremella fuciformis (shirokikurage or white jelly-leaf) are widely used in Chinese cuisine. Chemical structures of some of the polysaccharides from A. auricula and T. fuciformis, in relation to their medicinal and nutritional effects are described (Misaki and Kakuta, 1995).

Flavour, colour, inclusions, ripples, and variegates play important roles in creating distinctive ice cream products and enhancing consumer appeal. This chapter examines different flavouring materials and colouring systems used in ice cream, together with chocolate, cocoa, fruits, nuts, cookies, sauces, and other inclusions. It explains the formulation and processing considerations associated with ripples, ribbons, variegates, and complex flavour systems. Proper ingredient compatibility, dosage, distribution, and processing are essential for maintaining product quality. The chapter also addresses common flavour defects and their possible causes. Together, these topics provide practical guidance for developing attractive, innovative, stable, and commercially successful flavoured ice cream products.

Microscope

A microscope can be defined as an optical instrument consisting of a lens or a combination of lenses for getting magnified images of minute objects. A simple microscope is essentially an ordinary magnifying lens held on an adjustable stand. It can give magnification up to 20 times the size of the object.

A compound microscope consists of two separate lens system, the objective and eye piece (ocular) mounted on a holder known as body tube and with adjustment for illuminating the objects. It gives much greater magnification (100 to 1500 times) when compared to a simple microscope.

Ice cream over the years has come to acquire an easy acceptance as a healthy, nutritious and hygienic food for the aged, sick, growing children and adults. Its popularity, as demonstrated on all types of occasions is growing fast and its potential appears to be unlimited.

Gone are the days when the word “Ice Cream” was synonymous with strawberry and vanilla flavours or the innocuous orange. Ice cream is available in many forms, flavours and packages. Today, there are exotic variations to titilate the palate, such as Jingle Bells, Goody goody Gum Drops, Champagne Snowballs, Mr. Frost, Tutty Fruity, Butter Scotch, etc, waiting to launch customers on a gastronomical voyage.

It is uncertain how long ice cream has been produced, however, the International Association of Ice cream Manufacturers (1966) traces the beginnings of ice cream and frozen desserts to iced drinks enjoyed by Alexander the Great in the fourth century B.C. down through the years Nero in the first century A. D., Marco Polo in the 13^th century through Italy and France to England in 1643-1649, and to America around 1700. From a very old writings it has been learnt that the Chinese liked a frozen product made by mixing fruit juices with snow, what we now call water ice. It is believed that ice cream evolved from iced beverages and water ices that were popular in the medieval period. This technique later spread to ancient Greece and Rome, where the wealthy, were partial to frozen desserts.

After disappearing for several centuries, ice creams in various forms reappeared in Italy in the Middle Ages, most probably as a result of Marco Polo returning to Italy in 1295 after a 16-17 year stay in China, where he had learnt to appreciate a frozen dessert based on milk. There is no gainsaying the fact that the true origin of ice cream cannot be proclaimed with a fair measure of certainty but, all the same, the Italians claim that Benaroo Bountalenti, a resident of Tuscany, invented ice cream in the early 1300s. From Italy ice cream spread over Europe during the 17^th century, and for long remained a luxury product for the royal courts. Italian ice cream was very popular in London around 1870.

1. INTRODUCTION

Medicinal plants constitute considerably a large component of natural vegetation. Several of these species are in great demand for domestic consumption as well as for commercial use by the herbal industry. About 800 species are estimated to be in trade with a turnover of Rs.4000 crores per year. This high demand by the herbal industry has put enormous pressure on the wild populations leading to destructive collection of the produce as maximum species of medicinal plants are wild.

A medicinal plant is as any plant which contains substances that can be used for therapeutic purposes or which are precursor for chemo- pharmaceutical synthesis. The medicinal plants are useful as a drug or therapeutic agent, having different medicinal values in form of active ingredient. Medicinal plants may therefore be defined as a group of plants that possess some special properties or virtues which make them important as drugs, therapeutic agents and for medicinal purposes.

Medicines from India are used by about 60 per cent of the world’s population. These are not only used for primary health care not just in rural areas in developing countries, but also in developed countries as well where modern medicines are predominantly used. While the traditional medicines are derived from medicinal plants, the herbal drugs are prepared from medicinal plants only. Use of plants as a source of medicine has been an ancient practice and is an important component of the health care system in India. There are about 45,000 medicinal plant species in India, with concentrated spots in the region of Eastern Himalayas, Western Himalayas, Western Ghats and Andaman & Nicobar Island. India is the largest producer of medicinal herbs and is called the botanical garden of the world. In rural India, 70 per cent of the population depends on the traditional type of medicine, the Ayurveda. Ayurveda and Kabiraji (herbal medicine) are two important forms of alternative medicine that is widely available in India. It is estimated that about 80,000 species of plants are utilized in some form or other by the different systems of Indian medicine. Many herbs and spices are used in Indian cooking, such as onion, garlic, ginger, turmeric, clove, cardamom, cinnamom, cumin, coriander, fenugreek, fennel, ajowan (ajwain), anise, amchur, bay leaf, hing (asafoetida) etc. Ayurvedic medicine uses all of these either in diet or as a medicine.

1. Ethyl alcohol content in alcoholic beverages is determined by Pyknometer Method or SG (Hydrometer) Method (after distillation). %Alcohol (v/v) = 8610.6 – (16584 x SG) + (7973.3 x SG 2)
2. 1 ml of 0.05N NaOH is equivalent to 0.00375 g of tartaric acid.
3. Volatile acidity of alcohol drinks is measured in terms of as acetic acid. 1 ml. of 0.05N NaOH is equivalent to 0.003g of acetic acid.
4. Esters in alcohol drinks is expressed as ethyl acetate gms. per 100 liters of abs. alcohol. 1 ml. of 0.1N NaOH is equivalent to 0.0088g of Ethyl acetate.
5. Esters in Higher alcohol drinks is expressed as Amyl alcohol gms. per 100 liters of abs. alcohol.1 ml of 0.1N NaOH is equivalent to 0.0088g of Amyl alcohol.
6. The concentration of Higher alcohol g/100L is determined by spectrophotometer method using p-dimethylaminobenzaldehyde solution by reading the % T or Absorbance (OD) of developed colour of samples and series of standards in spectrophotometer at 530/535 nm against reagent blank as reference.

Introduction

Organic substances consumed for nutritional purposes can be called as “food”. Food contains biomolecules, like, protein, lipid and carbohydrate, inorganic minerals as salts, and organic substances, such as, vitamins, emulsifiers, acids, antioxidants, pigments, polyphenols and flavour-producing compounds. They can be of plant or animal origin. Depending on the durability in terms of suitability of consumption, foods can be perishable, semi-perishable and non-perishable. Food spoilage occurs due to chemical, microbial, or physical actions. eventually affecting its nutritional values, colour, edibility and texture (M. Rahman, 2007).

SYNOPSIS

Food is any substance consumed to provide nutritional support for the body. It is usually of plant or animal or fish origin. Plant foods are the most abundant sources of nutrition on earth. Only plants contain powerful substances called phytochemicals, which protect us from cancer, heart disease, and an array of other serious illnesses.

Dairy byproducts constitute an important segment of dairy industry. An important criterion in the economic choice of any process is the efficient utilization of byproduct that is produced along with the main product. The main byproducts of dairy industry are skim milk, buttermilk, whey and ghee residue. Each and every component of milk must be judiciously processed into edible form not only to improve the profitability of dairy industry but also to make best use of the unique nutritional value of the precious milk constituents on one hand, and to prevent environmental pollution, on the other. However, dairy plants, particularly in India, are usually confronted with the problem of byproduct utilization, especially that of whey and ghee residue in economical manner.

Skim milk is a byproduct obtained during the manufacture of cream. It is rich in solids-not-fat content and has high nutritional value. In dairy plants, it is mostly utilized either in standardization for the manufacture of main dairy products or preserved by removing moisture in milk powder form. The skim milk when utilized in either of these two forms or consumed as liquid, is not considered a byproduct. It is regarded as a byproduct only when it is either not economically utilized or utilized for derived byproducts, like casein and other related products, co-precipitates, protein hydrolyzates, etc.

Buttermilk is the byproduct obtained during butter manufacture. Sweet cream buttermilk resembles skim milk in gross chemical composition and is usually admixed with bulk of skim milk for further spray drying or even product manufacture in dairy plants. Desi buttermilk, on the other hand, has long been an important domestic beverage in India. It has high nutritive and therapeutic value. It also finds its way in the preparation of a host of culinary dishes such as kadhi, dhokla and idili. Also a number of federations and private plants sell salted and spiced buttermilk in 200 ml pouches.

12.1 Introduction

Man is the most beautiful of all God’s creations and like man, his environment too is beautiful with rivers to quench his thirst with sweet water, atmosphere to provide him oxygen, land and fire to provide him food. Primitive man ate uncooked food and lived in caves. Soon he learnt the use of firewood for cooking of raw meat and provided the first instance of ‘Pollution from food processing’ in history. As man shifted from one place to another, this sort of living never polluted the environment. But as the man ascended the ladder of civiliz ation, his needs grew in arithmeti c progression but corresponding pollution grew in geometric progression. With increase in agriculture produce, a need was felt to preserve the glut production in the form of processed foods giving rise to massive development of food processing industries all over the world. The rapid industrialization of agriculture and horticulture, increased the pollution load many folds especially the biodegradable waste from food industry [41].The wineries and distilleries (distill wine to make brandy) are no exception. Nevertheless, the waste is a precious source of several useful materials as such or after fermentation [1,31,46,86]. Thus, development and environment are two sides of the same coin.

From time immemorial, the biosphere is acting as a sink for all the waste products and recycles them to make good the loss so that every generation finds it the same as one before it. But, of late, this self-cleaning and equilibrium maintenance of biosphere is disastrously disturbed as the waste produced from man’s activities is continuously exceeding the capacity to purify herself. Consequently, our biosphere is becoming more and more poisonous and days are not far away when this planet will become inhabitable.

Distillation, leaching, and extraction

A. Distillation

Distillation is a widely used separation process in various industries, including chemical, pharmaceutical and food processing. It is particularly important in the production of alcoholic beverages, essential oils, and purified water. Distillation works on the principle of exploiting differences in the volatility of components in a liquid mixture to separate them based on their boiling points.

Principles of Distillation

Distillation is a time-tested and versatile separation technique employed across a myriad of industries for separating components of liquid mixtures. Its effectiveness lies in its ability to leverage differences in boiling points among the various constituents of a mixture.

Importance of Foods

The word “instant” has been used in widely different types of premixes to specify the products either as ready-to-eat food or semi processed foods. The instant premixes available in Indian market were classified as Indian products and Westernized or sophisticated products. The instant mixes included under Indian market products are spice mixes, snack mixes and desert and sweet meat mixes. The Westernized products (instant mixes) contained soup mixes, beverage mixes, desert mixes and soft drink mixes.

Convenience foods are gaining popularity in recent years as they are very easy to handle, require minimum storage space and are attractive. Convenience foods have emerged as a new set of products in the international market. Most of the traditional foods that are commercially available in our country are being prepared / processed by cottage industries and by some of the multinational companies. The various types of convenience foods/ instant mixes that are presently being processed, marketed and consumed all over the country. Supplementation with protein-rich sources and preparation of acceptable ready-to-eat snack foods would not only correct its nutritional inadequacies, but would also provide a variety.

Instant mixes were high in nutritive value especially needed for armed forces, light in weight, easy to carry and prepare. Rapid industrialization and urbanization and changes in eating habits of Indian people led to very high demand for ready-to-use snack foods. The convenience instant foods are meeting the urgent and exigency situations of offering hospitality to unexpected guests.

Changing life styles and values are at the root of considerable changes in eating habits over the last few years. Hand-in-hand with a strong demand for fast and take away foods, there has been a marked upturn in popularity for convenience foods in India. The major reasons for this trend are: the decline of the family meal time, growth in disposal incomes (only in cases of city dwellers), the desire for more leisure time and demand for “foreign” or “sophisticated” dishes inspired by the media and increased travel.

Introduction

About sixty percent of the world’s food intake comes from the three major crops, i.e., wheat, rice and maize (Thielecke and Nugent, 2018). Depending upon the country of utilization and consumption, the products made from cereals such as barley, wheat, maize, triticale, spelt, buckwheat, rice etc. can vary in the range of pasta, bread, pastries, soups, chapatti, cooked rice etc. World cereal utilization in 2021/22 is forecasted at 2,811 million tonnes and the worldwide production of cereals is expected to reach 2,818 million tonnes by 2025 (FAO, 2020).

Confectionery fills an especially direct need; the sugar of agreeableness joined with exquisite flavors, smells and mouthfeel affects a basically transitory feeling of thriving and joy. Sugar confectionery has been made all through the long haul with extending headway and it remain alive in unlimited plans following a changed levels of agreeableness, flavors just as scents, feel, appearance and tastes

With the increasing health consciousness of consumers, there has been an increasing concern over the use of thermal processing methods like blanching, pasteurization, sterilization etc. for enhancing the shelf life of foods as these methods fail to preserve the fresh like nutritional, therapeutical and sensory qualities of the food. With the increased consumer demand for fresh and fresh-like foods, interest in minimal processing of foods is increasing. The trend is also shifting from the traditional heat processing to those technologies that employ no or minimum heat application, thereby retaining the quality to a maximum level. One of the ways to accomplish this is via use of non-thermal processes. Over the past few years a number of non-thermal processes or cold preservation methods have been invented and developed. These methods are being evaluated in pasteurization and sterilization of various foods or in the extension of shelf life of various packaged foods. Some of such novel technologies and the products prepared, have been discussed here under.

1. Extrusion

Extrusion is a size enlargement process wherein small granular food or powdered particles are re-formed into larger pieces with different shapes, textures, colours and flavours from the basic ingredients. In extrusion food is compressed and forced to pass through a fine opening (die). As soon as it comes out of the opening, the outside pressure is very less as compared to the pressure inside the screw of extruder and the food expands instantaneously. If the food is heated the process is called as extrusion cooking. It is a process which combines several unit operations including cooking, mixing, kneading, shearing, compressing, shaping and forming. Extrusion adds a variety to the products by changing shape, size, texture and even some of the minor ingredients of the food and at a reduced cost than most of the other processing methods. Extrusion cooking (not extrusion) is a high temperature short time (HTST) process that reduces microbial contamination and inactivates enzymes.