eChapters

Digitalization is transforming ice cream operations by connecting procurement, production, quality, cold chain, sales, distribution, finance, and management through integrated information systems. This chapter examines the transition from traditional manual operations to ERP-, AI-, IoT-, and data-driven management. It explains the costs of limited digitalization and the department-wise benefits of integrated systems, including better traceability, demand forecasting, inventory management, energy monitoring, cold-chain control, predictive maintenance, and profitability analysis. The chapter also explores artificial intelligence, business intelligence, IoT monitoring, and evidence from industry research. It emphasizes that technology alone is insufficient: standardized processes, accurate master data, user training, governance, and management discipline are essential for achieving measurable digital transformation.

4a. Intestinal Disorders
 
History of health claims
 
According to Bottazzi (1983) it was in 76 BC that the Roman historian Plinius recommended the use of fermented milk for treating gastroenteritis. Metchnikoff claimed that the intake of fermented milk containing Lactobacilli reduces the toxin producing bacteria, thereby increasing the longetivity of the host (Metchnikoff, 1908). Tissier (1905) showed that there was an increase in the Bifidobacteria in breast fed-infants, thus claiming that the administration of Bifidobacteria to infants suffering from diarrhea was very beneficial as they supersede the putrefactive bacteria that causes the disease. Intestinal beneficial microfloras are responsible to resist the disease (Bohnhoff et al., 1954).

Pineapple (Ananas comosus) is an edible fruit bearing plant native to South America belonging to family Bromeliaceae. Pineapple is grown over an area of 1.06 million hectares with an annual production of 29.36 million metric tonnes (FAO, 2022). Pineapples are rich in vitamin C, minerals, fiber and low in calories. The enzyme bromelain present in pineapple is of considerable importance to the pharmaceutical and cosmetic industry (Varilla et al., 2021). The market for pineapples has been expanding significantly because of its appealing aroma compounds and nutritional benefits. The climate and distribution of rainfall in tropical and sub-tropical regions make these areas ideal for pineapple cultivation. Worldwide, Brazil is the leading producer of Pineapple followed by Philippines, Thailand, Costa Rica and India (FAO, 2022). In India the leading pineapple producing states are West Bengal, Northeastern region, Bihar, Kerala, Karnataka, Goa, and Maharashtra.This ‘Kew’ of Cayenne group and ‘Mauritius’ of the rough leaf Queen group are the two varieties dominating in India (Devi et al., 2013; Joy and Sindhu, 2012).

Botanically, Pineapple is a herbaceous perennial having short stem and tough waxy leaves. It produces a fleshy, edible, yellow fleshed which is a fusion of 100-200 berry like fruitlets. Most of the members of Bromeliaceae family are epiphytes i.e. grown on rocks and living trees though pineapples grow on the soil bearing sensitive adventitious root that cannot regenerate once damage and intolerant to poor soil aeration. The cultivated varieties of pineapple can be categorized into three groups namely, Cayenne, Queen, and Spanish. The Spanish and Cayenne groups can be cultivated for dual purposes viz. fresh fruit and canning. However, the Queen group are only cultivated for fresh fruit markets due to the presence of deep eyes making it unsuitable for canning (Devi et al., 2013).

The distribution systems are designed to ensure that processed fluid milk is stored and transported under optimal conditions, maintaining its quality and freshness until it reaches consumers. An effective distribution system for processed fluid milk involves careful planning and execution to guarantee timely delivery, quality preservation, and customer satisfaction. Given that milk is a highly perishable product, it requires meticulous handling and strict temperature control. Technology plays a crucial role in preserving its integrity throughout the supply chain. The use of technology reduces human error, increase the efficiency of distribution operations, and lower operational costs by preventing idle resources through coordinated logistics for both outbound and inbound trips.
To address the specific demands of manufacturing, packaging, distribution, and transportation, integrated business process automation solutions are implemented. These solutions include following features:
• Identify and define the most efficient delivery routes, reducing transportation costs and ensuring timely delivery.
• Scheduling and monitoring of delivery routes to maintain optimal delivery speeds, and manage loading and unloading processes so as to minimize exposure to adverse conditions. Automated solutions and tools help maintain the required temperature conditions throughout the entire supply chain.
• Verify and document supplier practices to ensure that all partners in the supply chain adhere to the agreed-upon temperature standards. Store the temperature-related data to help in auditing and analysis, and continuous improvement of the cold chain process.
• Shelf life and expiration date management is a critical component in  the storage and transport of dairy products. Proper management ensures that dairy products remain safe for consumption and retain their quality throughout the distribution chain.

Introduction

Lactic acid bacteria (LAB) are characterized as Gram-positive cocci or rods, non-aerobic but aerotolerant, able to ferment carbohydrates for production of energy and lactic acid. Lactic acid bacteria includes different major genera: Lactococcus, Enterococcus, Lactosphaera, euconostoc, Melissococcus, Oenococcus, Pediococcus, Streptococcus, Tetragenococcus, Vagococcus and Weissella. Other genera are Aerococcus, Microbacterium, Propionibacterium and Bifidobacterium. Through carbohydrate fermentation along with lactic acid, various organic acids are produced due to which there is a fall in pH level and creates unfavorable environment or inhibits growth of some undesired microorganisms. The low pH makes organic acids lipo -soluble, allowing them to invade into cytoplasm of pathogens by rupturing cell membrane. LAB are generally regarded as safe (GRAS), and have a significant role in the preservation of foods and fermented products. Under controlled conditions they can be used as natural competitive microbiota or as specific starter cultures. Antagonistic substance like bacteriocins are produced from lactic acid bacteria that inhibits the activity and growth of other bacteria and these bacteriocins are active against various pathogens in minimum concentration. These are antimicrobial peptides modified by post -translational mechanisms and exported to the extracellular medium. Till date about 239 bacteriocin producing LAB genome and 789 putative bacteriocin producing genes cluster are stored in the public databases. Many gram positive and gram negative bacteria in the environment produce bacteriocins.

A laboratory is essential for research work in science and development. Most of the research institutes have dedicated laboratories for researchers and students to conduct experiments, perform research work, as well as to provide hands-on learning/training to students. There are certain rules and regulations laid down by the laboratory in-charge which need to be followed strictly for safety purposes. Some of the laboratories keep ‘safety manual’ for researchers to read before entering into the laboratory to conduct experiments. Whenever safety is compromised in a laboratory, there is increase in risk of unwanted incidents in the laboratory. Storing food/beverages in the same refrigerator where laboratory chemicals are kept may lead to disastrous effects on health. This chapter aims to provide instructions in brief on the things to be performed (Do’s) before and after entering onto a laboratory as well as the things never to be done (Don’ts) in a laboratory for the safety reasons.

Good Laboratory Practices (Do’s)

• P Wear apron/labcoat while working in the laboratory.
• P Use gloves/respiratory mask/fumehood while handling toxic/volatile/inflammable chemicals/reagents.
• P Use pippet or pippetor for safety in transfer of solutions.
• P Protect eyes, face and naked parts of the body from UV radiations. Use safety goggles or face mask/apron.
• P Keep your eyes away from Liquid Nitrogen and use cryogloves while handling it.
• P Arrange all the necessary materials/solutions before starting the experiment.
• P Periodically fumigate/ozonize culture and inoculation rooms.
• P Autoclave all contaminated materials before discarding.
• P Pre-treat gel or solution containing Ethidium Bromide (EtBr) before discarding into laboratory waste-disposal bin, and use gloves while handling them.
• P Burn all the transgenic plant materials in an incinerator after taking necessary observations.
• P Make entry in the designated log-book and clean the instrument after using it properly.
• P Switch-off the instrument after use or when not in use.
• P Wash hands with soap and remove the labcoat before leaving/going out of the laboratory7.
• P Ensure that switches for fans/lights, and water taps are off while leaving the laboratory.
• P Follow the biosafety guidelines suggested for handling and disposal of the hazardous chemical.

As the flow properties of liquids play such an essential role in our daily lives, whether intentionally or unintentionally, no one is truly an absolute beginner when it comes to rheology. Consumers not only focus on new and improved products but also consider the texture of the products e.g thick and creamy

Introduction

Dough is a complex mixture of flour constituents, water, salt and other ingredients depending upon the requirements of end-products. It is the principal intermediate stage in the transformation of wheat into different end-use products. Rheological properties of dough determine the behaviour of dough during mixing, rounding and molding used in making different products and also effect on the quality of finished product. Therefore, understanding the various features of dough rheology and their relations with product quality is important. The importance is enhanced further because of mechanization and automation of baking industry. Dough is composed of continuous phase in which gas cells are dispersed. The continuous phase is called “dough phase”. It consists of starch granules embedded in protein matrix along with some lipids, cell remnants and yeast cells in fermented dough. Gas production and retention is the most comprehensive quality requirements of the dough for bread making. The ability of the wheat dough to retain gas during fermentation and oven rise is unique. This depends on the ability of the dough to be stretched into thin membranes because of protein phase.

13.1 Introduction
Drying is the process of evaporation separating a liquid from a substance or mixture of components. Either solid or solid–liquid phase describes the product to be dried. The separation follows a solid and a gas phase pattern. “Milk Product” is a product derived from milk processing that might include food additives and other substances functionally required for the milk product as approved in the laws (FSSAI Milk standards). Made to increase the storage life of the product, lower bulk so as to cut packaging and shipping costs, etc., dried milk products are created.
13.2 Dried milk
“Dried milk or milk powder is the product generated by the removal of water by heat or the equivalent means, to produce a solid containing five percent or less moisture. Dried whole milk or whole milk powder (WMP) from whole milk; and from skim milk is known as Dried Skim Milk or Skim Milk Powder (SMP), or Non-fat Dry Milk (NFDM); respectively
13.3 Whole Milk Powder
Dehydrating milk from cows, buffaloes, or a combination of both or from milk that has been standardized results in whole milk powder. Up to 0.3% of the weight of the product might be calcium chloride, citric acid, sodium citrate, and sodium salts of orthophosphoric and polyphosphoric acids; also included butylated hydroxy anisole up to 0.01% by weight. The label does not have to list these additions. Milk powder must to have a fat level at least 26.0 percent and a moisture level no more than 5.0 percent. Measured as lactic acid, its overall acidity should not be more than 1.2 percent. The Coliform count should not be more than 90 per gram; the normal plate count should be just 50,000 per gram. For roller-dried goods and spray-dried goods, the solubility index shouldn’t be higher than 15.0 or 2.0.

Therapeutic Aspects of Drug-nutrient Interactions
Drug-nutrient interactions are expressed as physical, chemical, and pathophysiological relationships between a drug and a nutrient. This reaction is multifactorial. The drug has the potential ability to interact with nutrients which may lead to a reduction or enhancement of therapeutic efficacy, nutritional risk, and drug toxicity. Even such interactions lead to the discontinuation of drug therapy. But these kinds of interactions vary from person to person. Infants and children are the most vulnerable group in this concern as they are in the developmental phase where there is a lack of proper drug-metabolizing enzymes and inefficient renal function. Generally, DNIs signify negative impacts on human health but sometimes these interactions work in a positive way by reducing irritation in the GI tract or by increasing the absorption of drugs. Proper updated knowledge about DNIs is important for the appliance of diet therapy simultaneously with drug therapy as both of these are important strategies to manage or treat public health issues (Table 10.1., Table 10.2.).

Introduction

Pulses are a part of healthy and balanced diet and have special importance for vegetarians in fulfilling their daily requirements for body proteins. Low productivity in pulses is due to nutritional deficiency in soil and imbalanced external fertilization (Awomi et al., 2012). Nitrogen (N) is more important as it is essential component of amino acids and proteins. It fixes atmospheric N of about 35 kg ha-1 by the help of symbiotic Rhizobium, a soil bacterium (Movalia et al., 2020). Globally, Rhizobium and Bradyrhizobium can fix approximately 175 x 106tons of N every year which is higher than the annual total chemical N fertilizer production of 30 x 106tons (Hidayatullah et al., 2016). The element molybdenum (Mo) is crucial for functions of nitrogenase and nitrate reductase, the two important enzymes that act as catalyst for N fixation. These two enzymes work properly in presence of Mo as nitrogenase contains Fe-Mo and Fe-Fd proteins, and N fixation cannot take place without these proteins (Hidayatullah et al., 2016).

6.1 Introduction

In general, the terms drying and dehydration are interpreted as the removal of moisture from a food product. Removal of moisture from a food product offers an excellent protection against most common causes of food spoilage. The drying or dehydration process achieves such protection by reducing the moisture content of the food product to levels which are adequate to limit microbial growth or other adverse chemical reactions. During drying, heat and mass transfer occur simultaneously (Figure 6.1). Heat is transferred from the bulk gas phase (i.e. hot air used for drying) to the solid phase (i.e. food product to be dried), where part of it is utilized for vaporization and the remainder is taken up by the solid phase as sensible heat. Mass (i.e. moisture of food product) is transferred in the form of vapour through various resistances, first from the interior of the solid to the surface, then through vaporization at or near the surface and finally in transport of the vapour into bulk gas phase. Dehydration is the removal of moisture close to bone dry condition.

Drying/ Dehydration means the process of removal of water.

Drying : Removal of water (moisture) by using non conventional energy sources like Sun or wind.

Dehydration : Process of removal of moisture by the application of artificial heat under controlled conditions of temperature and / or humidity and air flow.

Abstract

Cocoa and coffee are highly sought after commodity crops in the market owing to the distinct flavor and aroma characteristics. Cocoa beans are mostly used in the manufacturing of chocolates and various types of confectioneries while coffee is mainly consumed in the form of beverages. Both cocoa and coffee need to be dried and roasted in order to produce the flavor precursors which further develop into the desired flavor and aroma in the finished products. This chapter aims to provide an overview of cocoa and coffee processing with particular emphasis on drying and roasting aspects and its impact on product quality.

Drying is basically the unit operations which is used in many of the food industry nowadays. It can be desirably known as the process of removing moisture to relent a hard products. It is the transfer of energy source, mostly it derives heat from the outer environment to the dryer in which the food products is placed.

Introduction

While experimenting with chemicals, sometimes we need to dry the chemical/ solution (solid, liquid or gas) using a process like evaporation or distillation, mainly to remove water or different solvents. Drying is the process of evaporation or distillation to remove water/solvent from a solution, solid or even from gas. Generally, a drying agent (usually an anhydrous inorganic salt) is used for this process, which reacts with the water (present in the chemical/ solvent to be dried) to form a hydrate. For example, anhydrous MgSO4 is one of the drying agents. The drying agents are recognized by their capacity (the rate at which they absorb water) and their intensity (the amount of water left behind in the solvent at equilibrium). No chemical reaction or change in phase occurs during the drying process.

Type of Solvents

Apart from water (a universal solvent), there are three families of organic solvents used in laboratories.

1) Oxygenated solvents: Alcohols, Ketones, Glycol ethers, Glycol esters, etc.

2) Hydrocarbon solvents: Aliphatic and Aromatic hydrocarbons.

3) Halogenated solvents: Chlorinated hydrocarbons.

Dehydration (or drying) is defined as ‘the application of heat under controlled conditions to remove the majority of the water normally present in a food. The main purpose of dehydration is to extend the shelf life of foods by a reduction in water activity. This inhibits microbial growth and enzyme activity, but the processing temperature is usually insufficient to cause their inactivation. Therefore any increase in moisture content during storage, for example due to faulty packaging, will result in rapid spoilage.

Introduction
Drying is probably the oldest method of food preservation used for agricultural crops, including food grains, oilseeds, spices, as well as fruit and vegetables. Drying refers to the removal of moisture content from the food to a level at which the activities of food spoilage micro-organisms are inhibited. Therefore, the reduction in water activity of the food as a result of moisture removal is themain principle of preservation by drying. Two commonly used terms for dried foods include low-moisture foods and intermediate moisture foods (IMF). Dried foods or low-moisture foods generally do not contain more than 25% moisture and have a water activity (aw) in the range of 0 to 0.6. Intermediate moisture (IMF) foods on the other hand contain 15- 50% moisture with a water activity (aw) of 0.60 -0.85. Dried grapes (raisins and munacca), apricots, dates, Morchella (Guchhi), bael, chilli, figs, etc. are commercial products prepared by using drying. However, the temperature used for drying is usually insufficient to cause the killing of microorganisms and enzymes, therefore any increase in moisture content during storage due to faulty packaging can also spoil the product. Thus, greater care is required for the packaging and storage of dried products.

The method of preserving various food stuffs by drying them, and thereby depriving microorganisms of the water necessary for their growth, has been known for centuries. According to Marco Polo’s accounts of his travel in Asia in 13^th century, soldiers of Kublai Khan carried dried milk on excursions. Before it was used, water was added to a portion of dried material. Mixing was accomplished by movement of the horse during riding on the trip. The recombined product was then consumed at the mealtime. The belief is that part of the fat was removed from the milk before drying and dehydration was accomplished by solar heating.

Drying is defined as the removal of the liquid, usually water, from a product by evaporation, leaving the solids in an essentially dry state. Today the production of dried milk and milk products has become important segment of dairy industry. Dry milk provides a means of preserving the excess milk supply during the flush season for use during the lean season. The value added dried dairy products like malted milk foods, infant food and infant formulae and dairy whiteners are convenient ready to use products having wide acceptance. The water content of milk powder ranges between 2.5 and 5%, and no microbial growth occurs at such low water content. Drying extends the shelf life of milk, simultaneously reducing its weight and volume. The main purpose of drying milk are: a) to improve the storage life of the product due to low moisture content, b) to reduce cost for storage and transportation of product due to reduced bulk, and c) to provide convenient product for utilization in many dairy and food preparations.

The production of dried milks to a great extent is now being governed by the market requirement and to some specialized use of such products. Considerable quantities of dried skim milk powders are being used extensively in the preparation of ‘Reconstituted and Recombined milks”. Milk powders are also used extensively in the manufacture of ice cream, bakery products, confectionary products, cottage cheese and in other cheese varieties. The greatest proportion of milk powder is utilized in confectioneries, such as milk chocolate, caramels, soft sweets, coatings, biscuits and cakes. In these products, milk powder has a special effect on the quality of particular products: it improves consistency, flavour as well as nutritional value and shelf life.

Abstract

Food proteins are among the commonly used ingredients by food manufacturers to produce different products with desired characteristics. Due to several nutritional and functional properties, proteins have different functions in various food products in addition to their role in metabolic system of the human body. Dilute or concentrated solutions of pure proteins or unprocessed food products which are rich in protein are very sensitive to deterioration or degradation by microorganisms and thus have short shelf life at ambient temperatures due to their highly moist structure and high protein content. Drying is one of the best methods that can guarantee preservation, a longer shelf life, chemical or thermal stabilization and resistance against other stresses. A full understanding of stresses encountered during drying is needed to choose an appropriate drying process and to optimize this process for maximum product quality. A number of methods have been used by various researchers to dry protein-containing foods. Among these methods, freeze drying and spray drying are the most common techniques. Sun drying, convective hot air drying, vacuum drying, heat pump drying, radio frequency drying as well as combined or hybrid drying methods with two or more of the drying methods have also been developed.

Removal of water from the food by non-conventional energy source like sunlight, wind, and a smoky fire. Drying (dehydrating) food is one of the oldest and easiest methods of food preservation.

Dehydration

Dehydration is the process of removing water or moisture from a food product under controlled condition like temperature, relative humidity, air flow, etc.

Principles of Drying and Dehydration

Drying removes the moisture from the food so that bacteria, yeasts and moulds cannot grow and spoil the food. It also slows down the action of enzymes, but does not inactivate them. Dried food items can be kept almost indefinitely, as long as they are not rehydrated.

1. Introduction

Drying is a thermo physical and physicochemical process, which involves removal of excess water from a solid, semi-solid or liquid food material by evaporating it into vapour phase on applying heat, to reduce growth of microorganism or to completely eliminate their growth. Hence, reducing the water activity increases shelf life of food products. Drying medium for carrying evaporated moisture can be air or steam. Benefits of drying include increase in shelf life, easy to transport, handle food material and reduce packaging cost as it reduces bulk weight. 

Introduction

Durum or macaroni wheat (T. turgidum var. durum) is an important crop used chiefly for the production of pasta in Western Europe and North America, and two layered bread, single layered bread, burghul, couscous, pasta, frek and feed in other parts of the world (Table 1). In North Africa and the Middle East, durum is also used for producing flat breads. On a global basis only a small amount of durum wheat is used for baking of pan-style and hearth-style bread. Also, durum wheat for baking is often used in blends with common wheat. In India, durum occupies approximately 2.0 mha area and production is estimated to be around 2.5-3.0 million tones annually amounting to 3-4% of the total wheat production. The consumption of pasta is increasing at the rate of around 5% annually and currently it is estimated to be around 10 Lakh tones. The demand for pasta products may increase further due to increasing population and improving standard of living.

E numbers: Each food additive used in the food industry has been given a specific number code for their identification. These numbers are called as E numbers. These E numbers are used within the European Union. The word prefix “E” stands for Europe. They are commonly used on the food label through out the European Union. These are not used in Australia and New Zealand. The different food additives are given different E numbers depending upon the type of food additive like E100-E199 (food colours), E200-E299 (preservative), E300-E399 (antioxidants), E400-E499 (thickners, stabilizers, emulsifier), E500- E599 (pH regulator, anticaking agent), E600- E699 (flavour enhancers), E700-E799 (antibiotics), E900-E999 (miscellaneous like waxes, synthetic glazes, packaging gases, sweetners, foaming agents), and E1000-E1099 (additional chemicals).

Earling: The young lamb of one to two years’ age is called earling or yearling.

Ebullioscopic constant: The boiling point elevation is expressed by Dtb = Km, where m is molality of the solution and K is ebullioscopic constant. It is also called as molal boiling point elevation constant. The unit of an ebullioscopic constant is K Kg mol-1.

Much of the post-harvest losses of fruits and vegetables in developing countries is due to the lack of proper storage facilities. While refrigerated cool stores are the best method of preserving fruits and vegetables they are expensive to buy and run. Consequently, in developing countries there is an interest in simple low-cost alternatives, many of which depend on evaporative cooling which is simple and does not require any external power supply. India is the second largest producer of fruits and vegetables in the world after Brazil and China respectively. Storage of fresh horticultural produce after harvest is one of the most pressing problems of a tropical country like India. India’s total fruits and vegetables production is lost during harvest, storage, grading, transport, packaging and distribution in a year which reduces the growers share. Due to their highly perishable nature, about 20-40% of total fruit and vegetable production go waste during various steps of the post-harvest chain, smooth transport and insufficient cool storage space/ facility at farmer’s level and high cost of refrigerated storage so further enhances loss of fruits and vegetables. Temperature and humidity play major role in storage of fruits and vegetables Temperature can be controlled by using energy consuming methods such as air-cooling, hydro-cooling, vacuum-cooling, chilling, ice cooling, freezing, etc.

Pineapple is an important tropical fruit crop of India introduced by Portuguese from Southern Brazil early in the 16th century. It is a versatile fruit acting as a rich source of nutrients in many favourite recipes. In addition, it is an excellent source of vitamins, minerals, and antioxidants,highlighting its role as anti-inflammatory, digestion, and immunity support.It resembles epiphytes where roots are sensitive to poor soil aeration (Joy and Sindhu, 2012). In the present day, the demand for pineapple is increasing gradually in different parts of the country. However, insect-pests infestation turns out to be one of the major impediments in its quantum of production.

Pineapple is infested by several insect pests like mealy bug, scale insect, thrips, fruit borer, white grubs, bud moths, midges, fruit flies, termites etc. during its entire crop duration. However, Mealy bugs appeared as the key pest of pineapple while otherslike scale insects, thrips and fruit borer could cause economic damage to the crop only under favourable environment. Therefore, emphasis must be given for development of suitableecofriendly management techniques by proper prophylactic (cultural, mechanical, biological etc.) and protective measures to reduce the insect-pest population below the economic damage through proper monitoring and regular survey of the crop field.Thus, this chapter emphasizes on the important insect-pests infesting Pineapple along with their appropriate management options.

Model Project for Setting Up 10 & 20 Cow Dairy Farm (Indicative)

    ·    The models are only indicative and in no way designed to provide exact economics. Following guidelines may be used by the interested persons to work out the details of their project, depending upon the local market and conditions.

    ·    An interactive module considering the land availability for fodder cultivation, willingness to opt for silage bunkers, type of chaff cutter (manual or machine operated), milking machine, mister set, etc. is under preparation.

    ·    The proposed interactive module would require preference for set of inputs and intended herd size and accordingly generate output outlining the estimated investment, cost and return.

Successful cultivation of a crop is governed by various factors including the edaphic and climatic conditions of the region, owing to which the crop responds in terms of quality and productivity. Pineapple (Ananas comosus L. Merr.) is one of the major crops cultivated across the tropical and sub tropical countries worldwide. Adaptability of the crop under different climatic conditions, topography, temperature, photo-periodicity, rainfall and edaphic conditions will be discussed in this chapter.

Climatic zone: Pineapple is a tropical fruit crop though it can thrive well in the sub-tropical condition as well.Pineapple grows well inwarm and humid climate ranging from mild coastal climate up to an altitude of about 1000 meters, provided the area is free from frost (Singh, 2014).Pineapple is commercially grown over a wide range of latitudes from 30° N (Assam, India) in the northern hemisphere to 33°S in the Southern hemisphere (South Africa) (Malezieux et al., 2003; Purseglove, 1972).

Topography: Pineapples are easy to cultivatesince they thrive naturally in a variety of places with different elevation, especially in tropical countries (Kaudo, 2014). Though the plant survives at different altitude, the fruit quality and size may alter at different elevation. When pineapple is grown at altitudes greater than 1000 m, smaller fruits with elevated tartness with less attractive pulp colour (Purseglove, 1968).Moreover, fruit flavour can also vary, wherein the fruit tends to bemore acidic and sour when cultivated above 1800 meters, but will be sweet and tasty under 1350 meters (Kaudo, 2014).

Temperature: On an average, the temperatures required for growing pineapples range within 18-30°C (Kaudo, 2014) andmore specifically at 23 - 24 ° C (Neild and Boshell, 1976; Py et al., 1987). The optimum day and night temperatures for pineapple were reported to be about 30°C and 20 °C, respectively (Neild and Boshell, 1976). Bartholomew and Kadzimin (1977), however have reported that leaves and roots grow best at 32°C and 29°C respectively and the growth practically ceases below 20°C and above 36°C. Py and Tisuucau (1965) have observed 25°C to be optimal for fruit ripening.

10.1. Introduction

When it comes to packaging, plastics are still popular because of durability, versatility, economic production, and enhanced mechanical properties. However, with growing concerns about the impact of plastics-based packaging on the environment, edible and biodegradable packaging were introduced. The application of edible and biodegradable packaging promotes renewable resources, which greatly reduces environmental concerns and fulfil the packaging requirements. The sources employed to develop edible and biodegradable packaging are mainly plant-based biopolymers like cellulose, proteins, starch, and lipid. Moreover, the properties of the packaging material are decided by the proportions of these biopolymers. Hence, selecting a food commodity to be package is equally important as selecting suitable resources for the development of edible and biodegradable packaging.

Introduction

Fruits and vegetables are essential constituents of daily diet and are highly demanded in the recent years from most of the population. They are reservoir of vitamins, essential minerals, antioxidants, bio-flavonoids, dietary fibres and f lavour compounds which fall easily victim to abiotic and biotic adversities. Fruits and vegetables are highly perishable and during the post- harvest, there are considerable losses due to microbes, insects, respiration and transpiration.

The important quality factors of fresh produce contributing to the marketability are texture, colour, appearance, flavour, nutritional value and microbial safety. These quality factors are measured by plant variety, ripening stage, maturity stage pre-harvest and post-harvest conditions. The Post-harvest losses of fruits and vegetables are a serious problem because it rapidly deteriorates them during handling, transport and storage. Edible coating over fruits and vegetables are used to improve their quality and shelf life.

Mushrooms are good as nutritious food for all ages and under all conditions of health. The mushroom is a fleshy, space-bearing organ of non-green edible fungi. Its fleshy nature of mushroom is responsible for its main attraction to human being as a source of food. Like other fruit and vegetables, mushrooms are soft textured and highly perishable in nature. Mushroom are potential sources of nutrients. They can convert nutritionally valueless substances into high fat and protein food. Mushroom proteins are comparable to muscle protein in nutritive value. Being a good source of vitamins and proteins it is considered be a distinct food. The digestibility of protein in these is 72-83%. Mushrooms are edible fungi; assume considerable importance in human diet as they are good source of non starchy carbohydrate, dietary fibre, minerals and vitamins-B and essential amino acids. Mushrooms are popular their delicacy and flavour rather that food value. However, it is now a well-established fact that they are excellent sources of vitamins and minerals (Vijaya Khader, 1988). The vitamins in mushroom are well retained during cooking, canning, and dehydration. The White button mushrooms (Agaricus bisporus), Shiitake mushroom (Lentinus edodes), Pleurotus species (Pleurotus osteatus, P. flabellatus, P. sajor caju etc.), Paddy straw mushrooms (Volvariella volvacea), Winter mushrooms (Flammulina velutipis), Jew’s ear mushrooms (Auricularia polytricha) are commercially cultivated species of mushroom. In India, mainly three species viz., white button, oyster or dhingari and paddy straw mushrooms are commercially cultivated at large scale.

INTRODUCTION

Any crop has its own optimal requirements or selective response to the environmental factors such as rainfall/ soil moisture supply, day/night air temperature, soil temperature, duration of sunshine and its intensity. The growth and development of a plant which ultimately governs the agricultural productivity of a region, is closely related with climatic factors. Weather phenomenon has a profound influence on crop growth stage. A moderate wind or a light rain, when the crop growth is near to harvest, may do more damage than even heavy rain and high wind in the vegetative phase. So land use planning by matching crop growth with weather parameters forms a basis for successful agriculture (Samra, 2003) in a particular region. In order to achieve sustainable agricultural productivity in the 21^st century, the climate and weather systems are being recognized as critical agenda and input.

Abstract

Egg is a nutrient dense food, containing high quality proteins and a wide range of vitamins, minerals, trace elements, PUFA, MUFA etc. Whole egg slices were prepared by boiling in water technique for a predetermined time i.e. 15 min. The egg slices were prepared with spice extract at different levels of 2%, 5%, 7% and 10%, out of which 5% was found acceptable by sensory evaluation. The egg slices with 5% spice extract were then subjected to frying in different oils such as mustard oil, rice bran oil, sunflower oil and soya bean oil. Among all of the fried egg slices and control (without any spice extract and frying), on sensory evaluation, fried egg slices with mustard oil was most preferred. Texture analysis results shows that hardness was increased on frying and highest in fried egg slices with rice bran oil. Also the values for other TPA component viz. adhesiveness, cohesiveness, gumminess and chewiness were increased on frying as compared with control. Among the fried egg slices, highest values for adhesiveness, cohesiveness, gumminess was observed in egg slices with rice bran oil. However, chewiness of fried egg slices with sunflower oil was highest. It can be concluded from present study that the egg slices fried in mustard oil was organoleptically acceptable with good textural properties.

Introduction Pulses are a vital source of protein (20-25%) in comparison to cereal proteins (10-12%); which cater to the most vegetarian population (Venkidasamy et al., 2019) and other countries which are scarcity of animal protein availability. In the category of pulse crop, chickpea is considered the second utmost significant crop, which is grown in almost 35 countries globally. Chickpea mainly contains carbohydrates, protein, minerals, vitamins, dietary fiber, folate, β-carotene and health-promoting fatty acids (Badshah et al., 2003; Tosh & Yada, 2010) and consuming these grains will repeatedly help in lowering the risk of chronic diseases (Jukanti, Gaur, Gowda, & Chibbar, 2012). Ozone is often regarded as a potent oxidant capable of penetrating the grain (Tiwari et al., 2010), and it can control the bio-agents such as insects, molds, and mycotoxins (Wang et al., 2016). Due to the fact that ozone gas is unstable, it convert back into oxygen without leaving any residues in short time (McClurkin, & Maier, 2010), so, it can be used as a fumigant without leaving any residue. The Food and Drug Administration (FAO) has approved it for fumigating grains, fruits, and vegetables.

Vegetable oils and fats play a very important role in our diet. They provide essential fatty acids which are precursors of important hormones such as prostaglandins. They control many physiological factors such as blood pressure, cholesterol and reproductive system [1]. Coconut oil is a popular vegetable oil obtained from kernel of fruit coconut (Cocos nucifera). It is liquid at room temperature and bland in taste. Coconut oil is extensively used in cooking purpose in coastal tropical regions although it has been used in abundance for its medicinal properties.

Introdoction

Tillage is a prime activity carried out prior to sowing of a crop with an objective to bring the soil to a favorable tilth to provide a congenial environment for crop growth and yield. The operation of ploughing once and left out for a few weeks followed by a broadcasting of rice seeds by hand and then ploughing and raking together at the same time once gave highly significant rice grain yield (Srisa-ard, 2008). Adoption of the “Sawah” system (bunded, puddle and leveled) in inland valleys in Ghana lead to significant improvement in soil and water management; enhancement in rice grain yield and made sustainable production. Even the practice of Sawah system of cultivation increased local rice production by over 300% because of the mechanisms with intrinsic resistance to erosion (better water control and nutrient management (Buri et al., 2012).

Abstract

Garden peas of two cultivars (Pb-87 and Pb-88) were procured. Pods were shelled manually, grains were blanched and dehydrated. Other lot of peas of both the varieties was allowed to mature on the plant till the plant foliage dried up, harvested, pods were dried in shade for few days, shelled manually and grains were further dried in shade. Grits were prepared by grinding rice and pea (dhal) in a laboratory grinder to pass through 20 mesh sieve. Blends were prepared by mixing rice and pea grits in the ratio of 100:0, 85:15 and 70:30. The blends were subjected to extrusion cooking using Brabender single screw extruder. The extruder die pressure, specific energy consumption (SEC), expansion ratio, density, water absorption index (WAI), water solubility index (WSI) and organoleptic characteristics were studied. Addition of pea grits resulted in a decrease in die pressure in all the blends. Addition of pea grits showed a significant effect on SEC. A decrease in expansion with increase in the level of pea grits in blend was observed. The extrudates having lower expansion showed higher density values and vice versa. Effect of replacement of rice grits with pea grits on WAI was found to be significant. Level of pea grits significantly affected the WSI. Incorporation of pea grits in the rice grits significantly affected the sensory characteristics. Replacement of rice grits with mechanically dried pea grits resulted in deterioration of acceptability score, but addition of field dried pea grits improved the same.

Introduction In latest years, there has been an upsurge in customer situation over using artificial colorants in foods, especially on the subject of healthiness and safety issues (Amchova, Kotolova, & Ruda-Kucerova, 2015). Dietary colorants have been banned or regulated by the European Food Safety Authority (EFSA) and various other national authorities throughout the world because to their confirmed or suspected link to enhanced cancer progression or adverse reactions. For the same motives, various pigments are being investigated and are most effective provisionally authorized at this time. Consequently, the use of natural additives in food production is becoming increasingly popular among food companies (Schwartz, Joachim, & Giusti, 2007). Red C-PE is the most extensively used colour and has various application in food, cosmetics, and pharmaceutical industries; however, because they are rare in nature, they must be synthesized. Therefore, the food sector is expressing an increasing interest in the finding, application, and stabilizing of natural red colorants, which are currently in high demand. A growing number of commercial companies are turning to cyanobacteria for colour extraction, including Spirulina sp. for the extraction of Phycoerythrin, Haematococcus sp. for the extraction of astaxanthin pigments, and Dunaliella sp. for the extraction of beta-carotene pigments (Sharma et al., 2021).

Abstract

Noodles are widely consumed throughout the world and their global consumption is second only to bread. In the study, response of reducing agents (cysteine hydrochloride and sodium metabisulphite) and oxidizing agents (potassium bromate and benzoyl peroxide) at 10 and 20 ppm levels on the farinographic and amylographic curve characteristics as well as on the noodle making properties of durum and commercial wheat semolina were investigated according to the AACC (1990) procedure. The farinographic curve characteristics revealed that water absorption was enhanced with increasing levels of reducing agents but decreased with addition of oxidizing agents. However there was no significant change in Dough Development Time in case of durum semolina on addition of reducing agents, but commercial semolina recorded significant changes at 20 ppm level of reducing agent. The best reducing agent for durum and commercial semolina was thus sodium metabisulphite and cysteine hydrochloride respectively. Addition of oxidizing agent potassium bromate at 20 ppm level enhanced stability and was thus chosen as the best oxidizing agent for durum semolina and benzoyl peroxide for commercial semolina. Addition of reducing and oxidizing agents improved yield, appearance, elasticity and extensibility characteristics of instant fresh noodles. The best levels were used in the preparation of noodles on the Italian extruder (NAMAD).

Abstract

Paddy seeds of variety PR - 116 were obtained from the PAU seed farm. These seeds were cleaned with commonly used seed processing equipment. Samples were divided into 2 parts. One part was kept as such for taking the observations of feed (control) and the remaining part was passed through specific gravity separator for its refinement. The various fractions obtained were recovery, middlings, and rejections. These graded fractions as well as the feed were packed in 5-kg cloth bags and stored under ambient conditions. Different quality parameters viz. moisture content, physical purity, thousand grain weight, percent germination, root/shoot length, vigour index and speed of germination were recorded at 30 days interval. The physical purity, thousand grain weight, percent germination, root length, shoot length and vigour index were found to be higher in recovery and minimum for rejections while moisture content was highest for rejection as compared to all other fractions. Germination, root/ shoot length, vigour index and speed of germination increased with the duration of storage while moisture content, thousand-grain weight and physical purity followed a reversed trend. Compared to feed, the recovery had higher quality attributes after 4 months of storage viz. moisture content decreased by 0.3%; physical purity increased by 0.67%; thousand grain weight increased by 2.97 gm/ thousand grain, germination increased by 8%; vigour index increased by 481.1 points; speed of germination increased by 3.2 seedlings per day. The grading resulted in improvement in overall quality of sunflower seed.

Most of the starch sources are cereals (40 to 90%), tubers (65 to 85%), roots (30 to 70%), legumes (25 to 50%) which contain nearly 70% of starch on dry basis (Santana & Meireles, 2014). Major application of starch is seen in food production, where it is used as a thickening agent, for stabilization, adsorption, gelling, for binding aromatic compounds and as a film forming agent as well (Subaric et al., 2007). About 0.8-3.2 tons of CO2 per ton of plastic can be saved by using starch-based plastics (Patel 1999).

Abstract

Re-constituted rice-premixes made by extrusion, has been successfully formulated for the fortification of market rice with vitamin A (retinyl palmitate and betacarotene) and iron. The statistics of vitamin A deficiency (VAD) and Iron deficiency anaemia (IDA) are alarming in the developing world, particularly in India. In fact, India is second largest producer as well as consumer of rice in the world, so fortification of rice with vitamin A and iron seems to be a successful solution to reduce the VAD and IDA in India. In order to design the final formulation, eight formulations containing target micronutrient profile were tested for vitamin A (both retinyl palmitate and beta-carotene) and iron retention for a period of six months under ambient (24-26 ⁰C) and elevated temperature (40 ⁰C) conditions. Nonsignificant iron loss was observed during six months of storage time under both ambient and elevated conditions. The higher retention of retinyl palmitate and beta-carotene was observed in formulation 5 and 8 respectively. In F5, the retention of retinyl palmitate was 73% and 66% and in F8, retention of beta carotene was 70% and 63% under ambient and elevated temperature conditions respectively after six months of storage. Substituting the original, vegetable shortening with palm shortening resulted in increased retention of retinyl palmitate and beta carotene in formulation 5 and 8. Thus, increased antioxidant effect of natural antioxidants in palm shortenings contributed to stability of micronutrients.

Introduction Noodles have received importance worldwide due to their particular taste, flavor, convenience, consumer acceptance, and low cost. The noodles generally come under the category of unhealthy and junk food because of high carbohydrate content and low vitamins, minerals, and fiber content (Park et al., 2011). Due to the increasing popularity of instant noodles, many people are becoming more prone to various health problems. The substitution of various ingredients to wheat flour noodles is increasing by incorporating different pulses, cereals, and pseudocereals to improve the nutritional properties and also make them health food. Among the pseudocereals, the use of amaranth and chia seeds in food products has been increasing because of their high nutritional value and good health benefits. Their proteins have well-balanced amino acids with a high content of essential amino acids and also good bioavailability (Lopez et al., 2019). These pseudocereals are also gaining importance due to their high content of phytochemicals and other macromolecules. The amaranth (Amaranthus sp) seeds are spherical and small, having approximately 1 mm diameter with a creamish to light reddish color. The composition of amaranth flour includes amylose (7.05%), proteins (15.27%), fat (7.33%), crude fiber (2.04%), and ash (2.93%) (Siwatch et al., 2019).

In India after rice wheat (Triticum aestivum L.) is the second most important cultivated food crop belonging to family poaceae. Total production of wheat was 760 million tons in India during 2016-2017 (FAOSTAT, 2017) which is second largest in the world after china. In India highest producing state of wheat is Uttar Pradesh followed by Punjab, Haryana, Madhya Pradesh, Rajasthan etc. Wheat is categorize into seven commonly known wheat classes those are hard red spring, hard red winter, soft red winter, hard white, soft white, durum and mixed wheat (Khamis, 2014). 

Abstract

Micronutrients and bioactive compounds must be part of the population's diet in sufficient amounts to meet the body's needs. The concentrations of micronutrients and bioactive compounds in plant foods at harvest are known to vary with such factors as the variety or cultivar, stage of maturity, geographic or climatic effects, etc. Most subclasses of polyphenols e.g., phenolics acids and flavonoids, the effects of processing on the contents were found negligible in comparison to the differences between varieties of plants but carotenoids are among the food components most affected by environmental and processing conditions. Thermal processing has long been known to cause significant losses of vitamins, carotenoids and anthocyanins. The heat treatment viz. blanching, pasteurization, sterilization etc. result in losses of thermally labile nutrients and bioactive compounds, but the inactivation of oxidative and other degradative enzymes (e.g., lipoxygenase for carotenoids, polyphenol oxidase for flavonoids, ascorbic acid oxidase for vitamin C). Nutrients in dehydrated products are more likely to undergo degradation during storage because of the greater surface area exposed to oxygen and light. Blanched products generally resist decomposition better than unblanched foods during storage. Compared to losses during processing, subsequent storage often has a small but significant effect on vitamin and bioactive compound contents. Reaction rates are relatively slow at ambient or reduced temperature. The processing method chosen, and storage condition applied finalise the retention of these compounds which decreases with longer processing time, higher processing temperatures and storage of the food.

INTRODUCTION

EGGS : Eggs and egg products constitute an important part of family meals. The economic importance of the egg to agriculture and industry, its multiple uses in the preparation of many food products, and its excellent nutritive value have stimulated scientific scrutiny into the nature of the egg.

STRUCTURE : The chief parts of the egg are the yolk, the albumin (the white), and the shell and the shell membranes. The yolk is more complex structurally than may be thought at first glance. At the very center is a light coloured structure called the white yolk. The vitelline membrane serves as the enclosure or sac for the yolk. The strength of this membrane is important when yolks and whites needs to be separated in cookery. Two important rather twisted membraneous structures extend from opposite sides of the yolk into the white.

In order to assess the quality characteristics of eggs the book reference values were taken for comparison