eChapters

Chicory (Cichorium intybus L. var. sativum D.C.) plant is the herbaceous, perennial plant and supposed to have descended from the wild chicory (wild succory, blue sailors) which is often seen along roadsides with its blue flowers. The leaves are used as salads in human diet and other different purposes. They were reported to be stomachic (Baumann 1982, Franke, 1981) and their juice was used against eye disease and poisoning. The infusion of chicory was believed to be good for the liver, kidney and stomach. Initially the wild plant was used but since approximately 300 B.C., the crop was cultivated for this purpose. Beverages, soups and sauces made of chicory were reported to be used in Italy and Belgium as early in 16^th century.

For the first time, the root of chicory was used as a substitute of coffee in 1690 in Holland followed by many other countries like Sweden, France, etc. During 1806 and 1813, the cultivation and use of roasted roots of chicory as coffee substitute spread over the whole European continent. In the 19^th century, the main centres of cultivation of chicory were North-East France, Belgium, England, Russia, Holland and Australia. Subsequently it was raised on large scale in Poland, Hungary, Germany, Switzerland and India. Presently over 20% of the World’s consumption takes place in Eastern Europe, especially in Poland (6%) followed by Russia, Hungary, Romania, Czechoslovakia and East Germany. Twelve percent is reported to be consumed in South Africa, 9% in India and 2% in the United States (Clark and Macrae, 1987).

India is a leading producer and exporter of onion, but its productivity, market stability and post-harvest efficiency remain constrained. Farmers face fragmented holdings, climate uncertainty, price fluctuations, inadequate storage, technological gaps and significant post-harvest losses. This chapter reviews government programmes and policies related to financial support, irrigation, infrastructure, crop insurance, market access, farmer organizations, storage, processing and agricultural research. It also discusses export-quality requirements, grading, packaging and pesticide-residue standards. Research priorities include stress-resistant varieties and hybrids, drip irrigation, fertigation, growth regulation, sprout control and non-thermal storage treatments. Coordinated policies and technological dissemination can improve farmer income, productivity, quality and market resilience.

Food is a major determinant of health, nutritional status and productivity of the population. It is, therefore, essential that the food we consume is wholesome and safe. Unsafe food can lead to a large number of food-borne diseases. It is necessary that the food available is safe, hygienic, wholesome and its quality must be assured. Quality of foods can be defined as the ‘composite’ of those ‘characteristics’ that differentiate individuals units of a product and have significance in determining the degree of acceptability of that unit by the buyer. In general, the quality control is the maintenance of quality at levels and tolerance acceptable to the buyer, minimizing the cost for the vender. But, from the scientific angle the overall quality refer to technical, physical, chemical, microbiological, nutritional and sensory parameters to achieve the wholesome food. These quality factors depend on the specific attributes such as sensory properties, based on flavour, colour, aroma, taste, texture, quantitative properties viz. percentage of sugar, protein, fibre etc and hidden attributes like peroxide, free fatty acids, enzymes etc. Though quality attributes are many, not all need to be considered for a particular product. It is imported to determine how far relatively the factor is in relation to the total quality of the product.

Hence, the quality attributes of a particular is based on the composition of the product, expected deteriorate reaction, packaging used, shelf required and the type of the consumer i.e., deployed in terrain conditions or in peaceful situation. With the ultimate goal of protecting the consumer, quality standardization systems have come into force for regulating the gamut of operations in food manufacture. In a broader sense, food laws and Regulation cover the related acts affecting the marketing, production, labeling, food additives used, dietary supplements, enforcement of General Manufacturing Practice (GMP), Hazard analysis and critical Control Point (HACCP), federal laws and regulations, factory inspections and important-export inspections.

The food is considered as one of the essential for the maintenance of life. Manufacturing of the food product is not enough form the food industry. It is necessary that the food available is safe, hygienic; wholesomeness and its quality must be assured. The food industry is an important segment of industries in India and has its own peculiarities unlike other industries. Food processing industry has been recognized by government as a major sector of growth. It must be free from harmful additives, microbes and remain so for a period, it is intended to be consumed. Therefore, the methods employed in quality and food safety assurance programme within the food industry will vary considerably in accuracy and sophistication according to the type of process and size and nature of resources available. Since the international market has become demanding in terms of quality, safety and delivery, installation of Hazard Analysis Critical Control Point (HACCP) in food industry would provide a competitive edge to food supplies in the international market. Food control refers to all activities carried out to ensure the quality, safety and honest presentation of the food at all stages from primary production through processing and storage, to marketing and consumption. The term has been used to describe a total national effort involving an integrated approach between government and all segment and sectors of the food industry. Food control is linked to improvement in the health of the population, potential of a country’s economic development and reduction of spoilage and food losses.

A wide variety of quality determinants is employed, including size, colour, maturity and extent of blemishes. Quality is a measure of the degree of excellence or degree of acceptability by the consumer. The marketing of fresh fruit and vegetables is aimed eventually ay appealing to the consumer for whom tradition plays a major role in determining the acceptability of a food item. The eating habits of people are conservative. The increase of direct market from producer to supermarket chains is leading to the imposition of standards to predetermined specification by the supermarkets. Important factors in quality for the consumers are: appearance, including size, colour, shape, condition and absence of defects, texture, flavour and nutritional value. Quality is the ultimate criterion of the desirability of any food product to the consumer. The overall quality of food depends on the nutritional and other hidden attributes. Quality of foods can be defined as the ‘composite’ of the ‘characteristics’ that differentiate individual units of a product and have significance in determining the degree of acceptability of that unit by the buyer.

K ration: It is a lightweight packaged ration of emergency foods developed for the U.S. armed forces in World War II (Plate 371).

Kaiser rolls: A round crusty roll often used for sandwiches (Plate 372).

Kalamata /calamata: It is brine cured black olive grown in Greece.

Kamucha: Tea cider or fermented tea beverages is known as kamucha. The fermentation process take place by the presence of yeast and bacteria

Kanji: Clean, black coloured, crisp and sound product of characteristic flavor prepared by full fermentation (chiefly lactic acid fermentation) of black carrot with 2.5% salt, 1% powder mustard and some amount of water. It is fermented to make ready to serve drink which is known as Kanji. Each kilogram of the grated carrots yields just 7-8 litres of kanji.

Karl Fischer Titration: Karl Fischer Titration is used for estimation of moisture content of foods (low moisture products).

Kasseri cheese: The simple unpasteurized sheep’s milk cheese (sometimes mixed with goat’s milk) is called kasseri. It is popular in Greece. It is made in the shape of wheel, fairly firm and pale yellow (Plate 373). The word kasseri comes from the Turkish kasar which means that it has ability to hold its shape when heated.

U value: U value is a measure of the heat transmission through a building part (wall or window) or through a given thickness of a material (insulation). U values with lower numbers indicate better insulating properties (Plate 614).

UHT milk: This milk is homogenized, heated to atleast 135oC for about 2-3 second, cooled rapidly and then packed in sterilized containers aseptically. The milk in packs can be stored for several months without refrigeration. The nutrient loss is negligible. Used for making yogurt commercially as it does not need to be boiled again.

UHT pasteurization: The milk is heated to ~150oC for a fraction of seconds practically no holding period. It is also called ultra pasteurization.

UHT sterilization: It is method in which food is sterilized, cooled and then aseptically placed in previously sterilized containers which are subsequently sealed in an aseptic environment.

Naïve panel: It refers to the sensory evaluation panel that has not been trained specifically regarding the product evaluation being undertaken in the study.

Nano technology: It is the art of manipulating materials on an atomic or molecular scale to build microscopic devices. The word “ nano’ meaning ‘dwarf” in Greek language refers to dimension / magnitude of the material / particle in the order of 10⁹. Nanotechnology is nothing but manipulating of particles into very small particles called nano-particles. These particles have dimensions in the scale of nano-meter and used to design / build materials and devices. Nanotechnology has been provisionally defined as relating to materials, systems and processes which operate at a scale of 100 nanometers (nm) or less. It will allow many things to be manufactured at low cost and with no pollution. The concept of nanotechnology was first given by Nobel Laureate physicist Richard P. Feynman in Southern California in 1959.

NaNO_2: Pink colour of cured meat is preserved by NaNO₂. It is effective against Cl. Botulinosm

Nanogram: It is one billionth of a gram.

Introduction
• Meat inspection involves proper veterinary examination of live food animals prior to slaughter (called ante-mortem examination), inspection of carcases and offals and pathological examinations where deemed fit
• Full ante-mortem inspection represents 50% of meat inspection
• Ante-mortem inspection is particularly useful for detecting scheduled or infectious diseases which are communicable to man e.g. anthrax, rabies and glanders
• Diseases where animals show nervous symptoms like tetanus, tuberculous meningitis, sturdy in sheep, lysteriosis, rabies, cysticosis etc. and where skin lesions are manifested such as food and mouth disease, swine fever etc. are easily detected during ante-mortem inspection which are difficult to be detected in post-mortem inspection
• Animals must undergo veterinary ante-mortem inspection on the day of their arrival at the slaughterhouse or before the beginning of daily slaughtering
The inspection must determine
1. Whether the animals are suffering from a disease which is communicableto man and to animals or whether they show symptoms
2. Whether they show symptoms of disease or of a disorder of their general condition which is likely to make their meat unfit for human consumption-- any medicine/substances
3. Whether they are tired, agitated or injured
4. Whether they are sufficiently clean to enter the normal slaughter protocol
• For public health purposes, the veterinarian must separate normal animals from those which may be suffering from a potentially zoonotic disease or present a hygiene risk to the slaughter hall environment owing to the soiled condition of their hide/fleece

Physical Properties of milk
Procedure: Collect different types of market milk samples and study the  properties of milk. Boil the milk and note down the properties given in table 1 and record the observations

The process of making dried milk involves eliminating water from milk, primarily through spray or roller drying. It is regarded as a significant sector of the dairy industry and is made from whole cow, buffalo, or standardized milk. Skim milk powder (SMP) is made from milk after the fat has been removed whereas whole milk powder (WMP) is made from whole cow or buffalo milk

FSSA (2006) Standard Of Milk Powder According to FSSA (2006), Milk powder is the product obtained by partial removal of water from the milk of cows and/or buffalo. The fat and/or protein content of the milk may be adjusted by the addition and/or withdrawal of milk constituents in such a way as not to alter the whey protein to casein ratio of the milk. It shall be of uniform color and shall have pleasant taste and flavor, free from off-flavor and rancidity. It shall also be free from vegetable oil/fat, mineral oil, thickening agents, added flavor, and sweetening agents. It may contain food additives. It shall conform to the microbiological requirements prescribed by FSSA (2006).

Water activity, high storage temperatures, longer than usual storage times, high product moisture content, high processing temperatures, and container headspace are some of the variables that affect the Maillard reaction in dried milk.

Casein and whey proteins are the major proteins present in milk. Unlike casein, whey proteins are heat-labile. Whey protein fractions present in milk are α-lactalbumin, β-lactoglobulin, bovine serum albumin, immunoglobulin, euglobulin, and lactoferrin. β-lactoglobulin and κ-casein interact during heat treatment. When milk is refrigerated for longer than 24 h, it forms γ-casein and protease-peptone fractions.

One of the most consumed and well- known milk products in the Indian subcontinent is ghee. It is a by- product of tradition, prepared both at organized dairy plants and the household level for a well- established market. Ghee is traditionally made from the milk of cows or buffalo. The tetrapyrrole pigments biliverdin and bilirubin are responsible for the distinctive color of buffalo ghee. On the other hand, ghee is golden yellow due to the presence of carotenoids in cow’s milk. Ghee’s composition changes according to the kind and feeding habits of the animal and can differ from place to place and season to season.

In addition to, being a substantial source of fat- soluble vitamins, essential fatty acids, and other growth- promoting components, ghee is a rich source of energy. Its value as food for humans is enormous. Additional attributes related to medicine are present in ghee. Ghee can improve one’s physical and mental attributes and treat eye conditions like ulcers. Ghee is used in religious and ceremonial rites in addition to being consumed.

Composition

Ghee is a complex lipid composed of mixed glyceride which makes up 99–99.5% of its total content. In addition, it has trace amounts of calcium, magnesium, phosphorus, iron, copper, and fat- soluble vitamins, tocopherols, carbonyls, hydrocarbons, carotenoids, free fatty acids, phospholipid, sterols, and sterol esters

Fat
• Utmost significant slaughterhouse byproduct is fat obtained from intestines, kidneys, channel and other offals
• Edible ox fat is rendered and the obtained product is called premier jus (higher grade fat) which is differentiated into oleo oil and oleo stearin
• If all edible ox fat is rendered, it is called dripping and it used for human consumption
• Inedible fat is used for soap manufacturing
• The highest value fat from pig is recovered from peritoneal lining (leaf fat), and the subsequent highest value recovered from back fat, mesentery and omentum
• Sheep fat is separated into oleo oil and oleo stearin because of its strong flavour
• Mutton fat is harder and its stearin content is more than ox or pig and therefore, it is applied on the top of meat paste glass jar as a protective layer
Rendering of edible fat
Three principal procedure of rendering of edible fat are:
i. Wet rendering
ii. Dry rendering
iii. Continuous low-temperature rendering

The terms “cultured dairy foods,” “cultured dairy products,” and “cultured milk products” are other terms for fermented dairy products. Lactobacillus, Lactococcus, Leuconostoc, and other lactic acid bacteria, along with yeasts in certain products, are used to ferment milk to make these dairy products. The product’s shelf life is extended through fermentation, which also improves the product’s taste and milk’s digestibility. There is a wide variety of fermented milk products available, each with unique flavors and attributes. The following categories apply to fermented milk products, based on the type of fermentation.

Changes in Nutrients Resulting from Fermentation

Fermentation lowers the lactose content in fermented milk products; however, if the starting milk is concentrated or fortified, the finished product’s lactose content may be higher than that of liquid milk.

The composition and content of protein and total amino acids are comparable to those of raw milk. Casein degradation is small compared to cheese, accounting for not more than 1% of the total protein. While some products of casein degradation are used by the starter microorganisms, others build up as free amino acids in the fermented kinds of milk. The amounts of free amino acids that build up differ depending on the species. Generally, proline is increased in large quantities, followed by serine, alanine, valine, leucine, and histidine. As a result of continuous starter culture activity, the level of free amino acids increases during storage. A limited degree of lipolysis occurs during the manufacture of fermented milk. The amount varies depending on the type of species, but the pattern and concentration of free fatty acids are both impacted. During fermentation and the breakdown of amino acids, trace amounts of volatile fatty acids are also produced.

The basic processing and preservation techniques such as canning, freezing, dehydration, salting, pickling and freeze drying are designed to change perishable foods into more usable form and prevent undesirable changes caused by microorganisms, or by chemical, physical and biochemical reactions in the food itself. Hence an ideal processing technology would involve prevention of growth of microorganisms and at the same time retention of f lavor, texture, nutritive value and palatability of the products.

Processing and Preservation

Processing and preservation is the best way of utilizing surplus production of fruits during seasonal gluts.

Abstract

Food is basic need of human for its existence. Food is a source of nutrients needed for growth, energy and protection. There are number of chemical compounds not considered as nutrients but has positive effect on health. There is a need to look into the health benefits of the food components. Many lifestyle diseases are caused by the unhealthy food habits. Developments in science have led to establish the link between food intake and healthy living. Non-nutrient compounds of food are also called phyto-chemicals. Functional foods are prepared by increasing a particular nutrient or phyto-chemical to get health benefits. The increased cost of health care and drugs trigger the developments in this area. The approximate global market size is 30 billion US$ while Japan, United States, and Europe are the leaders in functional foods. FICCI has reported that functional food market in India is worth Rs 4,400 crore with growth rate of 21%per annum.

Introduction

The food has been considered as source of nutrients in the past but increasing evidences has proved that particular types of food can help in preventing the diseases. The World Health Organization (WHO) has reported that deaths due to Non-Communicable diseases are increasing in South East Asian counties; where as CMPN (Communicable, Maternity, Prenatal, and Nutrition) are

Production: According to Food and Agriculture Organization (FAO) of United Nation, the global production of fruits and vegetables including melons was 638 and 1090 million metric tons while India produced 75 and 106 million metric tons in 2011. In addition to this, the world production of roots and tuber was 810 million metric tons whereas India produced 51 million metric tons in 2011. It indicates that fruits and vegetables form an important part of the diet in the world including India. There is an ample opportunity to manufacture various health promoting products based on fruits and vegetables. A number of Fruits and Vegetable based functional food that can be prepared and presented in (Table 1) indicates the role of fruits and vegetables in the nutraceutical production for their health benefits.

Cereal Processing

    1.    The protein content of wheat grain varies widely, but for bread making a value of at least 11% is required.

    2.    Low grain sulphur will result in low concentrations of the sulphur-containing amino acids, cystine and methionine, and may result in poor loaf volume.

    3.    During seed germination endosperm starch is converted into soluble glucose and maltose to support the developing embryo. This is brought about by enzymatic activity, especially the enzyme a-amylase.

    4.    Excessive a-amylase levels result in the formation of a darkened loaf crust as a result of sugar caramelization and a sticky crumb structure which can cause problems during slicing.

    5.    Wheat with a protein level below 10% is preferred to reduce gluten elasticity.

    6.    There is a very good correlation between grain nitrogen and the amount of malt extract achieved, low grain nitrogen giving more fermentable extract

    7.    The term ‘coarse grains milling’ is a very broad one that refers to the comminution of the berries of the wheat, barley and other coarse grain crops.

Constituents of meat
i. Water- 75%
ii. Protein- 19%
iii. Soluble and non-protein substances- 3.5%
iv. Fat- 2.5%
• The muscle fibre is important unit of muscular tissue consisting of
a) Myofibrils- formed protein structures embedded in sarcoplasmic fluid
b) Sarcoplasmic reticulum- a fine system of tubules
c) Sarcolemma- a very thin membrane surrounding the myofibrils and around the exterior side of this membrane, the connective tissue is found
• 19% of protein in the muscle is muscle fibre (Table 11.1)
• α-alanine, glycine, glutamic acid and histidine are the major free amino acids present in the fresh muscle

Meat and Meat Products

    1.    Meat can be defined as “the muscle tissue of slaughter animals”.
    2.    meat is composed of water, fat, protein, minerals and a small proportion of carbohydrate

Microbiologists are constantly at risk of exposure to hazardous microorganisms that can cause diseases. These microorganisms may enter the body through inhalation, ingestion, cuts, abrasions, or the eyes. Therefore, handling cultures, slides, and live microorganisms requires utmost care. To ensure safety in the laboratory, several precautions must be followed:
1. Maintain cleanliness in microbiological labs at all times, taking extra care to prevent contamination from the air, equipment, personnel, or the environment.
2. Always wear a clean white lab coat or apron while working. After handling infectious microorganisms, the lab coat should be autoclaved.
3. No eating, drinking, or smoking is allowed in the laboratory.
4. Personal hygiene is essential in microbiological labs.
5. Wash hands with soap and water or a mild disinfectant solution (e.g., hypochlorite solution containing 50-100 ppm chlorine or 1-2% lysol solution) before starting work.
6. Disinfect the work surface by wiping down the lab bench with a disinfectant solution, such as 5% phenol or hypochlorite solution containing 200-300 ppm chlorine, both before and after work.
7. Keep the work area neat and organized at all times.
8. Use self-adhesive labels instead of moistening labels with your tongue.
9. Sterilize inoculating loops and needles by heating them in a Bunsen burner flame until red hot before and after use.

Drying is one of the oldest methods of preserving food. It is usually accomplished by the removal of water. Dried foods are preserved for long storage time because the available moisture is very low, so that the micro organisms cannot grow and enzyme activity is controlled. It is done by many methods. 1. Sun drying 2. Using mechanical dryers.