eChapters

15.1 CONTAMINATION

Milk is sterile at secretion in the udder, but contaminated by bacteria when it leaves the udder of a healthy cow. Milk is subject to contamination from the animal and adjacent areas. Bacteria found in manure, soil and water may enter milk from these sources. Certain diseases may be transmitted through milk, from a cow. It is essential that cows producing milk should be free from any contagious or infectious disease. Bovine tuberculosis comes from consumption of milk of tuberculous cows. Tuberculosis, brucellosis, mastitis and actinomycosis are the human disease transmitted through milk. The disease producing bacteria may find their way into milk and cause infectious diseases in children and adults.

COMMON BACTERIA IN MILK: The common bacteria found in milk are: Rickettsia, Coxiella burnetii, lactic acid bacteria, Lactobacillus bulgaricus, Streptococcus thermophilus, aerobic rods, Bacillus subtilis, Bacillus cereus, anaerobic bacteria, Clostridium butyricum .

Sources of Microbial contamination: Milk contains relatively few bacteria when it leaves the udder of a healthy cow. Milk is subject to contamination from the animal udder, skin and adjacent areas barn yard, milk utensils, milkers. Bacteria found in manure, soil and water may enter milk from these sources.

SYNOPSIS

Food security is a complex issue, linked to availability and access to food, malnutrition in the population, economic development, environment, and local and global trade. Malnutrition hinders healthy growth and proper development of the human immune system affecting neurological and cognitive development especially in children.

Abstract

Most dryers operate at low thermal efficiency. The development of models and control systems offers an opportunity to improve dryer operation and efficiency. Dryer control is very important and with deeper understanding of the drying concept, new “smart” dryers can be made more reliable and more cost-effective than classical dryers. This chapter will provide an overview of necessity of control and safety measure in food drying system, and terminology related with drying control system. Different control strategy includes conventional and advanced techniques implemented in drying operation are reviewed  here and simple outline of intelligence control system in drying technology are briefly described in succeeding section. Various hazards in drying process and risk and safety management will also be discussed.

Introduction

Perishable nature of horticultural produce is a major factor contributing in high post-harvest losses. The metabolic processes such as respiration, transpiration, and ethylene production remain active after the harvesting of produce, which drive ripening and senescence Fig. 1. Thus, an effective post-harvest handling is crucial to delay these changes. The rate of these processes depends on the produce’s physiological characteristics, composition, and storage conditions like temperature and humidity. Low-temperature storage is the simplest and most efficient method to slow down deterioration Escobedo-Avellaneda and Welti-Chanes, 2016. Combining low temperatures with methods that limit oxygen exposure, which fuels many enzymatic reactions, further extends shelf life and maintains food quality. Reduced oxygen levels decrease respiration and the activity of enzymes like polyphenol oxidase and peroxidase.

Conversion of muscle to meat is a complex process in which several physical and chemical changes takes place over a period of several hours or even days. The major changes which take place during this process include fall in muscle pH and temperature as well as muscle shortening which further leads to proteolysis or ageing. These changes during conversion of muscles to meat are variable and have great effect on meat quality (tenderness, juiciness, flavour, colour etc.) and also on certain processing characteristics like emulsification, binding properties and yield of the products. To know this complex process it is necessary to understand the process of energy production and metabolic pathway shifting in live animals.

Pre Slaughter

In the living animal, aerobic metabolism is used to obtain energy. The source of energy at this stage is either free fatty acids or blood glucose or muscle glycogen. In this process total 38 ATP molecules are produced from single glucose or glycogen molecule by the complex processes known as glycolysis, oxidative decarboxylation and oxidative phosphorylation. However, under stressful situations, anaerobic metabolism may be used and lactic acid is produced. Lactic acid is usually transported from the muscles to the liver, where it is re-synthesized into glucose and glycogen, or to the heart, where it is metabolized to carbon dioxide and water.

ABSTRACT

The improper disposal of food waste poses an environmental threat. The management of food waste in a sustainable way is always a challenge. Food waste is generated at various stages starting from food production till consumption. The cooked food waste generated due to various reasons leads not only to a loss of the food produced but also the water and energy used to cook it. This cooked food leftover can be served to the needy people or if not possible, can be processed further. This chapter focuses on various technological options for the management of cooked food waste in a sustainable way.

Keywords: Cooked food waste, Compost, Bokashi, Bio-surfactants, Environment

1.1. Introduction
The terms ‘counselling’ and ‘health promotion’ complement each other when it becomes a matter of an individual’s health. Health promotion is a part of behavioural social science that aims to change the systemic strategies adopted by the individual or group or by the mass community for the betterment of their health which can be achieved by talk therapy known as counselling. In the 21st century, from childhood to adulthood, all people are in a ‘rat race’ for their careers and necessities, which is one of the main reasons for stress generation. Not only that, chemical substances consumed by different food ingredients as food additives, preservatives, etc. but also induce oxidative stress and damage the functional activity of cells, tissues, organs, and systems. This ‘stress’ is a major culprit not only for the deterioration of physical health but also psychological health. Such stress imposition in daily life impairs normal physiological functions, skills, performance, and productivity. Unhealthy food, life, and work styles are also linked to the onset of pathophysiological complications that counselling and health promotion are required to overcome. Besides this, for sportsmen, pregnant women, lactating mothers, and growing children, nutritional counselling and health promotion are indisputable. For disease prevention and early recovery from disease, dietary counselling plays an immense role.
1.2. Counselling
Counselling is an intermittent, interpersonal interviewing process where the counsellor gives advice or suggestions to the client but never gives any direction. Counsellors assist the client in thinking, analysing, and acting to improve their insight power. The counsellor focuses on both the positive and negative sides of a particular event and allows the client to think and rethink its acceptability and unacceptability.

Definition

It is one of the important portion of milk which forms a fatty layer on top of milk when left un-disturbed. It is a prime component of milk and comprises mainly of milk fat. It may be defined as “that portion of milk which is rich in milk fat” meaning portion of milk into which larger portion of milk fat has been gathered.  According to FSSAI, 2011 Malai and Cream are defined as –

Malai means the product rich in butter fat prepared by boiling and cooling cow or buffalo milk or a combination thereof. It shall contain not less than 25.0 per cent milk fat.

16.1 Introduction
The fluid product “Cream” is defined by FSSAI standards as an emulsion of fat-in-skimmed milk that is comparatively rich in fat. It is derived by physical separation from cow milk, buffalo milk, or milk of any other species as defined under this regulation, or a mixture thereof. Cream, with the exception of sterilized variants, is composed of a minimum of 25% milk fat and is derived from cow or buffalo milk or a combination of both. It is a high-energy source that is abundant in fat and fat-soluble vitamins A, D, E, and K. The vitamin content is contingent upon the fat percentage in the cream.
16.2 Classification
Cream may be broadly classified into Market cream (direct consumption) and Manufacturing cream (manufacture of dairy products). The three different types of cream are:
i. Table cream/Light cream contains 20-25% milk fat.
ii. Coffee cream/ Whipping cream Contains 30-40 % milk fat, and
iii. Heavy cream/Plastic cream contains 65-85 % milk fat.
As per FSSAI Standards, Cream may be labeled according to milk fat content (m/m) along with product name as specified in item 1 of this Standard, as follows:
i. Low fat cream: Minimum 10 per cent. and less than 40 per cent.;
ii. Medium fat cream: Minimum 40 per cent. and less than 60 per cent.;
iii. High fat cream: Minimum 60 per cent.

Butter is one of the leading milk product in developed countries of the world. It serves as a balance wheel of dairy industry. Surplus milk is generally converted into butter to be used during the times of scarcity. It is an article of commerce and a sign if wealth. Butter is a fat concentrate, which is obtained by churning cream, gathering the fat into a compact mass and then working it for proper distribution of moisture and salt. The art of butter making has a long history. The manufacture of butter was confined to colder regions where gravity creaming was successful. The milk was allowed to stand undisturbed for 10-12 hours until layer of cream collects at the top.

Chemically, sugar candies are broadly divided into two groups: crystalline candies and amorphous or non crystallized candies. Crystalline candies are not as hard as crystals of the mineral variety, but derive their name and their texture from their microscopically organized sugar structure, formed through a process of crystallization, which makes them easy to bite or cut into. Fudge, creams, and fondant are examples of crystalline candies. Amorphous candies have a disorganized crystalline structure. They usually have higher sugar concentrations, and the texture may be chewy, hard, or brittle. Hard candies, such as lollipops, caramels, nut brittles and toffees are all examples of amorphous candies, even though some of them are as hard as rocks and resemble crystals in their overall appearance. Crystalline candies are chemically described as having two phases, because the tiny, solid sugar crystals are suspended in a thick liquid solution. These are also called grained candies, because they can have a grainy texture. Amorphous candies are have only one phase, which is either solid or liquid, and do not have a grainy texture, so they may be called ungrained.

Commercially, candies are often divided into three groups, according to the amount of sugar they contain:

Cucurbits form an important and a big group of vegetable crops cultivated extensively in this country. This group consists of a wide range of vegetables, either used as salads (cucumber) or for cooking (all the gourds) or for pickling (cucumber) or as dessert fruits (muskmelon and watermelon) or candied or preserved (ash gourd). They are of tremendous economic importance as food plants.

2.1. Ash Gourd (Benincasa hispida)

Ash gourd (Benincasa hispida L.) belongs to the family Cucurbitaceae. The winter melon, also called white gourd, ash gourd, or “fuzzy melon”, is a vine grown for its very large fruit, eaten as a vegetable when mature. It is the only member of the genus Benincasa. This is a monotypic genus and the only cultivated species is Benincasa hispida (Thunb) Cogn, commonly known as ash gourd or petha. It has a Sanskrit equivalent ‘Kooshmanda’ indicating its antiquity in India.

Originally cultivated in Southeast Asia, the ash gourd is widely grown in China, India and other parts of East Asia. The immature melon has thick white flesh that is sweet when eaten. By maturity, the fruit loses its hairs and develops a waxy coating, giving rise to the name wax gourd, and providing a long shelf life. The ash gourd is known by many other names in India regional wise like komora (Assamese), pethakaddu (Hindi), boodagumbala (Kannada), Kumbalanga (Malayalam), Kohla (Marathi), neer poosanikai (Tamil) and Boodida gummadikaya (Telugu).

Uses

Ash gourd have enormous medicinal properties as it makes a valuable place as a popular natural cure of ailments in traditional medicinal practice. Being low in calories it is an ideal vegetable for diabetic patients and good for weight control. It also acts as a good detoxifying agent.

As per Ayurveda, ash gourd is used to treat epilepsy, asthma, lung diseases, urine retention, internal haemorrhage, and cough. It is said that the fruit juice is also effective in cases of mercury poisoning and snakebite. It could also treat mouth cancer, protecting teeth and gums when a mouth gargle of the juice is done regularly. It is also effective in bleeding of gums. Ash gourd is easily digestible and keeps the body cool. It is a natural blood purifier.

Cultural characteristics of bacteria deal with the appearance of the growth in various liquid and on solid media. The growth characteristics of most of the bacteria are typical of the group or species and help in their identification. The terminology employed to describe various features of bacterial growth are mentioned below.

1. INTRODUCTION

Medicinal plants constitute considerably a large component of natural vegetation. Several of these species are in great demand for domestic consumption as well as for commercial use by the herbal industry. About 800 species are estimated to be in trade with a turnover of Rs.4000 crores per year. This high demand by the herbal industry has put enormous pressure on the wild populations leading to destructive collection of the produce as maximum species of medicinal plants are wild.

A medicinal plant is as any plant which contains substances that can be used for therapeutic purposes or which are precursor for chemo- pharmaceutical synthesis. The medicinal plants are useful as a drug or therapeutic agent, having different medicinal values in form of active ingredient. Medicinal plants may therefore be defined as a group of plants that possess some special properties or virtues which make them important as drugs, therapeutic agents and for medicinal purposes.

Medicines from India are used by about 60 per cent of the world’s population. These are not only used for primary health care not just in rural areas in developing countries, but also in developed countries as well where modern medicines are predominantly used. While the traditional medicines are derived from medicinal plants, the herbal drugs are prepared from medicinal plants only. Use of plants as a source of medicine has been an ancient practice and is an important component of the health care system in India. There are about 45,000 medicinal plant species in India, with concentrated spots in the region of Eastern Himalayas, Western Himalayas, Western Ghats and Andaman & Nicobar Island. India is the largest producer of medicinal herbs and is called the botanical garden of the world. In rural India, 70 per cent of the population depends on the traditional type of medicine, the Ayurveda. Ayurveda and Kabiraji (herbal medicine) are two important forms of alternative medicine that is widely available in India. It is estimated that about 80,000 species of plants are utilized in some form or other by the different systems of Indian medicine. Many herbs and spices are used in Indian cooking, such as onion, garlic, ginger, turmeric, clove, cardamom, cinnamom, cumin, coriander, fenugreek, fennel, ajowan (ajwain), anise, amchur, bay leaf, hing (asafoetida) etc. Ayurvedic medicine uses all of these either in diet or as a medicine.

Pineapple is one of the most economically important fruits in tropical and subtropical regions and gaining popularity to the consumers all over the world. The pineapple plant has many specific morphological, anatomical and physiological characteristics that determine crucial aspects of pineapple crop management, such as water use efficiency, nutrient management, weed management, flower induction etc.

Water Requirements and Irrigation

Determination of water requirements and plant moisture status: Pineapple plant responds well to as much as 5 cm of water per month from rain or irrigation though it is a xerophyte type and is capable of good production under relatively meager water supply. Maintenance of available soil moisture in the root zone areas requires less water for pineapple than for other crops due to lower transpiration rates. Plants achieve this type of adaptability through a process called assuberization, where suberin act as a physical barrier, preventing water loss from the tissues it surrounds.Stomata remains closed as an effect of drought during the entire day. But, whenever the plants are grown with sufficient moisture in well-aerated soils produced well-distributed roots with numerous white root tips. It helps the water use efficiency and carbon f ixation that pineapple shows to drip irrigation. The pineapple leaf is a major water storage organ for the pineapple plant (Malézieux et al., 1993). When the leaves are full of water the cells present in upper mesophyll layer can occupy almost half of its volume. Invery little water-supply, the water in the mesophyll layer is absorbed by the plant. Generally, representative ‘D’-leaves are taken in a group of six to ten leaves and the total thickness is measured and compared with the thickness of fully turgid leaves.

Culture methods employed depend on the purpose for which they are intended. In the laboratory the indications for culture are mainly to

1.Isolate bacteria in pure culture.

2.Demonstrate their properties

3.Obtain sufficient growth for preparation of antigens and for other tests.

4.Type isolates by methods such as bacteriophages and bacteriocin susceptibility.

5.Determine sensitivity to antibiotics

6.Estimate viable counts

7.Maintain stock solution

Introduction

Advances in food preservation methods have supported the journey of food science from that of a cookery science to a fast growing industrial technology. Food preservation knowledge deals with the way to prevent spoilage and maintenance of quality in foods. Spoilage is the deterioration in quality brought about by inherent biochemical and chemical changes, as well as microbial metabolism during food storage. Basic principles of food preservation (Frazier et al., 2008) remains the same, but newer methods for achieving the goal is added through research fuelled by a consumer demand for fresh-like foods with convenience and safety. Scientific information on novel processing methods are beautifully compiled (Cullen et al., 2011; Da-Wen Sun, 2014; Tokuþoðlu and Swanson 2015; Doona, 2018).

In-depth knowledge of physiological activities of micro-organisms in presence of preservation agents is essential for preparation of safe foods with prolonged shelf life. Besides this, it is necessary to understand the effect of food constituents on microbial resistance against inactivation agents, to identify critical dose requirement. This profound knowledge would also help to understand kinetics of microbial inactivation and to develop mathematical models suitable for a realistic design of process parameters. For better appreciation of the following sections, readers are encouraged to have fundamental knowledge in microbiology and food processing. The sections in this chapter cover advanced microbiological knowledge pertaining to the preservation aspects of food.

Genus Annona belonging to the family Annonaceae, contains more than seventy species of woody shrubs and trees, all of which produce aggregate fleshy fruits. Of these only a few produce edible fruits of commercial importance. Of all, Annona squamosa L. is probably the most popular fruit. It is also known as ‘Sitaphal’ or ‘Shariffa’. These can withstand drought better than many other fruit trees. Other species of the genus Annona providing edible fruits are A. reticulata L., A. muricata L., and A. cherimola L.

Custard Apple (Annona squamosa Linn.)

The custard apple, Annona squamosa L., also known as sweet-sop or sugar apple, is almost entirely eaten as a dessert fruit. Its pulp may be mixed with milk to form milk shake or made into ice-cream. The pulp has a pleasant texture and flavour. Several products like -squash, nectar, pulp butter, syrup, jam can be made from the pulp.

Custard apple is native to tropical America (Mexico). It is cultivated in Australia, Brazil, Chile, Egypt, India, Israel, Myanmar, Mexico, Philippines, Spain, Sri Lanka, South Africa, West Indies, USA and Cuba. In India it is popular in Andhra Pradesh, Madhya Pradesh, Tamil Nadu, Karnataka, Maharashtra, Uttar Pradesh, Orissa, Asssam, Bihar and West Bengal.

Cultivars: The cultivars vary in their shape, size, colour and eating quality. Some of the cultivars are Balanagar, Sangareddy Local, Chittorgarh, Barbados, British Guinea, Mammoth, Red Sitaphal, Yellow Sitaphal, Custard Apple Selection-1, Custard Apple Selection -2. Arka Sahan is a hybrid developed by ICAR-IIHR, Bangalore.

Materials Required

Canned product, weighing balance, can cutter, vacuum/pressure guage, seam checking guage, Refractometer / Salometer etc. 

Procedure

    1.    Take a canned product say canned peach.
    2.    Record the weight of the can (A)
    3.    Record the information marked on the label i.e net  weight, date of packing, etc
    4.    Observe the can externally for the concavity of the lid.
    5.    Record the vacuum of the can by using a vacuum guage
    6.    Cut the lid of the can with a can cutter
    7.    Record the head space
    8.    Put all the contents over a sieve and let the liquid drain
    9.    Record the weight of empty can (B) to calculate net contents
    10.    Record the drained weight of the pieces.
    11.    Record whether the liquid is syrup or brine
    12.    Record the TSS of the salometer reading of the liquid (as the case may be)

A cut-out examination is conducted for the evaluation of canned fruit and vegetables and other products for various quality attributes, viz., physical, chemical, sensory, and microbiological attributes. The examination is conducted by following the undermentioned steps: External/physical examination of unopened Can
1. External Appearance of the tin can: Note the external condition of the tin can like dents, rusty spots, scratches, leakage around seams, and the condition of ends. Based on external appearance describe the condition of the tin can by using the following terms:
i. Flat Can: A can where both ends are concave. The vacuum is high enough to maintain the ends concave.
ii. Flipper Can: A can where the vacuum is so low that mechanical shock will produce distortion of one or both ends.
iii. Springer Can: A can in which one end is distorted and the other end is flat and pressure on the convex end will cause the flat end to spring out when pressed.