eChapters

Abstract

Research has demonstrated that nutrition plays a crucial role in the prevention of chronic diseases as most of them can be related to diet. Functional food enters the concept of considering food not only necessary for living but also as a source of mental and physical well-being contributing to the prevention and reduction of risk factors for several diseases or enhancing certain physiological functions. One of the most clear objectives of the study of functional foods is to identify and validate biological markers in order to understand the interaction mechanisms between the food component and a body function. Epidemiologic and laboratory data from previous studies suggests that diets rich in fruits and vegetables are associated with a reduced risk of various types of cancers. The reduction in cancer risk may be attributed to the abundance of a family of specific compounds referred to as anthocyanins, which are found in various berries. Anthocyanins are water soluble pigments responsible for the blue, purple, and red color in many plant tissues Strawberry is one of “super fruits”, since they can form a significant component of the diet and are a potential resource of functional foods and nutraceuticals due to their antioxidant capacity and nutritional quality. Strawberries contain high levels of anthocyanins and they are also well liked by consumers. Popularity of strawberries in the consumer market makes them an ideal focus for chemoprevention studies. Strawberries are a rich source of phytochemicals (anthocyanins, catechins, the flavonols quercetin and kaempferol, and ellagic acid) and an important source of essential nutrients (ascorbic acid, potassium, folic acid, carotenoids, B-vitamins). Strawberries are consistently ranked among the top food sources of polyphenols and antioxidant capacity; the preventive and therapeutic health benefits of strawberries may be attributed to the synergistic effects of these bioactives and the nutrients contained in the fruit. These bioactive photochemical contribute the major health-promoting function. Strawberries have shown a remarkably high scavenging activity toward chemically generated radicals, thus making them effective in inhibiting oxidation of human low-density lipoproteins. Antioxidant activity of strawberries could contribute to the prevention of cancer, cardiovascular and other chronic diseases. Hence strawberry can be used as a vital and indispensible functional ingredient for the development offunctional foods and nutraceuticals.

Nutraceuticals and Health Foods

    1.    According to the International Food Information Council (IFIC), functional foods are “foods or dietary components that may provide a health benefit beyond basic nutrition.”

    2.    Nutraceuticals : A product isolated and purified from foods that is generally- sold in medicinal forms are usually associated with food. A nutraceutical is demonstrated to have a physiological benefit or provide protection against chronic disease (Coined originally by Stephen DeFelice in 1989, founder and chairman of the Foundation for Innovation in Medicine, USA).

    3.    The International Life Sciences Institute of North America (ILSI) has defined functional foods as “foods that by virtue of physiologically active food components provide health benefits beyond basic nutrition

    4.    Health Canada defines functional foods as “similar in appearance to a conventional food, consumed as part of the usual diet, with demonstrated physiological benefits, and/or to reduce the risk of chronic disease beyond basic nutritional functions.”

Abstract

Micronutrients and bioactive compounds must be part of the population's diet in sufficient amounts to meet the body's needs. The concentrations of micronutrients and bioactive compounds in plant foods at harvest are known to vary with such factors as the variety or cultivar, stage of maturity, geographic or climatic effects, etc. Most subclasses of polyphenols e.g., phenolics acids and flavonoids, the effects of processing on the contents were found negligible in comparison to the differences between varieties of plants but carotenoids are among the food components most affected by environmental and processing conditions. Thermal processing has long been known to cause significant losses of vitamins, carotenoids and anthocyanins. The heat treatment viz. blanching, pasteurization, sterilization etc. result in losses of thermally labile nutrients and bioactive compounds, but the inactivation of oxidative and other degradative enzymes (e.g., lipoxygenase for carotenoids, polyphenol oxidase for flavonoids, ascorbic acid oxidase for vitamin C). Nutrients in dehydrated products are more likely to undergo degradation during storage because of the greater surface area exposed to oxygen and light. Blanched products generally resist decomposition better than unblanched foods during storage. Compared to losses during processing, subsequent storage often has a small but significant effect on vitamin and bioactive compound contents. Reaction rates are relatively slow at ambient or reduced temperature. The processing method chosen, and storage condition applied finalise the retention of these compounds which decreases with longer processing time, higher processing temperatures and storage of the food.

Pickling is the process of preserving or extending the shelf life of food by either anaerobic fermentation in brine or immersion in vinegar. The pickling procedure typically affects the food’s texture and flavor. The resulting food is called a pickle, or, to prevent ambiguity, prefaced with pickled. Foods that are pickled include vegetables, fruits, meats, fish, dairy and eggs.

Food Processing Technology

    1.    The transition from solid to fluid and back is known as a phase transition and this is important in many types of food processing (e.g. water to water vapour in evaporation and distillation and dehydration; water to ice in freezing and freeze drying or freeze concentration or crystallisation of fats.
 
    2.    Phase transition takes place isothermally at the phase transition temperature by release or absorption of latent heat, and can be represented by a phase diagram.

    3.    A second type of transition, known as glass transition, takes place without the release or absorption of latent heat and involves the transition of a food to an amorphous glass state at its glass transition temperature.

    4.    The transition is dependent on the temperature of the food, time, and the moisture content of the food.

    5.    The density of a material is equal to its mass divided by its volume and has units of kgm^-3

Packaging

Packaging is a mean or system by which a fresh or processed product will reach from the production center to consumer in safe and sound condition at an affordable price.

Objectives of packaging and packaging materials

The primary objective or packaging is to protect the contents during storage, transportation and distribution against deterioration. It may be physical, chemical or biological. However, followings are objectives of packaging and packaging materials.

Yogurt is a fermented milk product that contains the characteristic bacterial cultures such as Lactobacillus bulgaricus and Streptococcus thermophilus. All yogurts must contain at least 8.25% solids not fat.

Abstract

Dietary fibers mostly include non-starch polysaccharides such as celluloses, hemicelluloses, gums and pectins, lignin, resistant dextrins and resistant starches. Based on their water solubility, dietary fibers may be divided into two forms insoluble dietary fiber which includes celluloses, some hemicelluloses and lignins which is fermented to a limited extent in the colon and soluble dietary fiber which includes f-glucans, pectins, gums, mucilages and hemicelluloses that are fermented in the colon. Resistant starch generally considered to be represented by the total amount ofstarch and the product of starch degradation that are not digested in the small intestine andpass into large intestine, and regarded as a component ofdietary fiber. Herbal nutraceutical is used as a powerful instrument in maintaining health and to act against nutritionally induced acute and chronic diseases, thereby promoting optimal health, and quality of life. Dietary spices in their minute quantities has an immense influence on the human health by their antioxidative, chemopreventive, antimutagenic, anti-inflammatory, immune modulatory effects on cells and a wide range of beneficial effects on human health. Nutraceutical is the hybrid of ‘nutrition’ and ‘pharmaceutical’. Nutraceuticals, in broad, are food or part of food playing a significant role in modifying and maintaining normal physiological function that maintains healthy human beings. Functional foods are including whole foods and fortified, enriched, or enhanced foods or dietary components that may reduce the risk of chronic disease and provide a health and physiological benefit beyond the traditional nutrients it contains.

1. Introduction

Osmotic dehydration is a useful treatment of dehydration compared to the other dehydration processes, as other dehydration processes bring adverse and irreversible changes in physical and nutritional status of food material. Recently in many studies it was found out that since plant membranes are semi-permeable in nature, not only moisture but transfer of solute from osmotic solution to the food material also takes place. Another kind of transfer which was also noticed is the leaching of micronutrients from the cells of food to the osmotic solution, but the amount being very low, this transfer can be neglected. (Mayor et al., 2006). The mass transfer kinetics was studied for different food materials (Hawkes and Flink, 1978). Effect of different variables such as pressure and temperature were also studied (Rastogi and Niranjan, 1998). The effective diffusivities for both water loss and solute gain can be calculated by using various methods which gives the rate of diffusion of solute and moisture for the food material. The finding of solute gain and leaching of micronutrients pointed the requirement of maintaining the osmotic dehydration process, which could be done by maintaining the process variables of osmotic dehydration. Impact of various process variables on osmotic dehydration and their best levels at which maximum water loss and minimum solute gain could be obtained had to be calculated out. For this purpose, optimization of process variables through response surface methodology (RSM) could be best utilized (Uddin et al. , 2004). RSM is a statistical tool which gives the random combinations of input variables to give the best output result as required. Various works have been done on optimization of process conditions of osmotic dehydration taking different samples of foods. In this study, bamboo shoot species (Bambusa balcooa) was taken as sample for osmotic dehydration to optimize the process variables for osmotic dehydration of bamboo shoots using salt as osmotic agent followed by calculation of effective diffusivity of water and solute during osmotic dehydration of bamboo shoot.

1. Introduction

Cherry peppers (Capsicum frutensis var. cerasiforme) which is locally known as dallae khorsani, is one of the important cash crops of Sikkim and Darjeeling hills. They are small, round shaped, fleshy and heavily seeded. They are green in color in early stage of fruiting and turn red when fully matured. It is an excellent source of vitamin A and C, which are important antioxidants (Howard et al., 1994). Cherry peppers are an ideal size for pickling or brining. Its hotness ranges from moderately mild to very high.

Due to its high moisture content (about 85% w. b. ), shelf life of cherry pepper is limited to 7 - 10 days. This makes it rare and costly during the off season. Hence, preservation of cherry peppers is of considerable importance both to the farmers as well as to the consumers. Drying is one of the oldest methods for preservation of cherry peppers to make it available throughout the year. To increase shelf life of chilies, drying up to 10 % moisture content (dry basis) is required which is accepted in export market.

For drying chillies, sun and hot air drying are the most common drying method used. However, due to the prolonged drying time of 16-48 h, the quality of the dried chillies is reduced (Kim et al., 2002). Many researchers paid more attention to innovative techniques such as short and medium-wave infrared radiation drying (SMIR) which not only maintain product quality, but also increase the drying rate. Moreover, infrared drying could save up 50% energy compared to convective drying (Nowak & Lewicki, 2004). The ability of infrared radiation to penetrate and heat the inner layers results in higher rate of heat and mass transfer (Ginzburg, 1969).

Abstract

Nutraceuticals have potential to be used as food supplement, preventive medicine and the growing evidence points in the direction that certain foods fight and or prevent against diseases. The development of next generation nutraceutical “super foods” or products consist of value-addition in the traditional natural diets.The word Nutraceuticals combine ‘nutrition’ and ‘pharmaceuticals’ to mean that they can be used as preventive drugs or food supplements. The increase in knowledge about the immune response unveils the fact that besides immunological disorders and infections the outcome of many other diseases like diabetes, hypercholesterolemia, rheumatoid arthritis, etc. can be modified by modulating Immune response. Hence, the efficient immunomodulators can be employed to prevent or cure the diseases as immunotherapeutic agents. The most acceptable alternative therapeutic agents are the edible sources. Hence the researchers shifted towards formation of nutraceuticals or foods acting as medicine, a concept which was given by Hippocrates long back.

Pollution emanating from industrial units has become a major problem globally and it is generally monitored by some government agencies. These agencies enforce various laws and regularly carry out checks at the industrial units. Same is true with regards to slaughterhouses or abattoirs. Pollution parameters are parameters against which the effluents coming out of the Effluent Treatment Plant (ETP) of slaughterhouse or any industrial entity is measured against. Effluent generated during various processes of the slaughterhouse is directed towards the ETP and it undergoes different processes to reduce the pollutants level in the effluent. Then, the effluent is tested against the pollution parameters and the effluent must have less than the maximum permissible level of the pollution parameters. The effluent must not have more than the permissible maximum level of the pollutants after coming out of ETP before being discharged into the municipal sewage system or some natural water bodies.
 Pollution parameters are
1. Biochemical oxygen demand (BOD)
2. Chemical oxygen demand (COD)
3. Chloride (Cl)
4. Dry matter (DM) or total solids (TS)
5. Grease, fat and oil
6. pH
7. Total nitrogen (N)
8. Pathogenic bacteria

Food Packaging

    1.    Food packaging : A wrap, pouch, bag, box, cup, tray, can, tube, bottle and jar are some of the many forms of packaging that contain food products. It must contain a food product as well as protect and preserve it for a specific length of time. Each package must, by law, display product information for the consumer.

    2.    Low Density Polyethylene (LDPE) is an economical material with low WVTR; however, it has high permeabilities to flavours/volatiles, poor grease resistance and are limp.
 
    3.    High-Density Polyethylene (HDPE) is stiffer, more translucent and has better barrier properties but needs higher temperature for sealing.

    4.    A copolymer of polyethylene and poly vinyl alcohol, and EVOH has outstanding gas barrier properties especially when dry.

    5.    High-density polyethylene is stiff, strong, tough, resistant to chemicals and moisture, permeable to gas, easy to process, and easy to form. It is used to make bottles for milk, juice, and water; cereal box liners; margarine tubs; and grocery, trash, and retail bags.

    6.    Low-density polyethylene is flexible, strong, tough, easy to seal, and resistant to moisture. Because low-density polyethylene is relatively transparent, it is predominately used in film applications and in applications where heat sealing is necessary. Bread and frozen food bags, flexible lids, and squeezable food bottles are examples of low-density polyethylene.

Abstract

The cereal grains are grown around the world, the most common is wheat, which accounts for one third of the total grain crop worldwide. In addition to providing energy, whole grains contain several key nutrients, including fibers, lipids, B vitamins and minerals as well as other beneficial components such as phenolic acids, flavonoids, lignans and phytosterols. Several of these components function as antioxidants. While multiple studies have been conducted to analyze antioxidants in different grains. In wheat and other grains, naturally occurring phytonutrients with antioxidant activity include phenolic acids, flavonoids, coumarins, polyphenols, phytates, terpenes, carotenoids, tocopherols and tocotrienols. Potential roles of the naturally occurring antioxidants in grains include free radical scavenger, reducing agent, complexation of prooxidant metals, quenchers of singlet-oxygen molecules and antioxidant defense enzyme system activators for biological systems. Wheat grain contains several components that have potential antioxidant activity and thus may have a protective role in human health. Traditional wheat-based breakfast foods include hot and cold ready-to-eat (RTE) cereals, as well as a variety of yeast-leavened and chemically leavened bakery products. Increasing baking time and temperature increases antioxidant activity in the bread crust and lowers antioxidant activity in the bread crumb portion. Wheat and wheat based products, particularly partial and 100% whole grain products have been shown to provide a variety of beneficial components including fiber, vitamins, minerals and other phytonutrients with antioxidant activity. Scientific evidence indicates that consumption of three or more ounce equivalents of whole grain foods per day may reduce the risk of coronary heart disease, type 2 diabetes and certain cancers and help with weight management.

1. INTRODUCTION

Leaf and soil analysis are the tools to estimate the fertilizer needs of fruit crops. Leaves are selected for analysis because:

• Leaf is the principal site of plant metabolism.
• The changes in nutrient supply are reflected in the leaf composition.
• The changes are more pronounced at certain stages of development.
• The concentration of nutrients in the leaf at specific growth stages are related to performance of the plant.

1. Key Forces Shaping Food Packaging • Changing Consumer Priorities • Modern consumers are increasingly choosing food packaging that aligns with values of health, convenience, and sustainability. The demand is growing for packaging options that are recyclable, biodegradable, or reusable. Consumers also expect transparency, with clean labels and QR codes providing details on ingredients and sourcing, which has become essential for building trust (Santeramo et al.,2022) • Environmental Sustainability • Sustainability remains a powerful influence on packaging innovation. Reducing single-use plastics, increasing recyclable options, and adopting circular economy principles are all priorities. Both consumers and businesses are actively seeking solutions that reduce environmental impact, such as renewable, compostable materials and designs that minimize waste ( Fao et al ., 2022)

Abstract

Egg is a nutrient dense food, containing high quality proteins and a wide range of vitamins, minerals, trace elements, PUFA, MUFA etc. Whole egg slices were prepared by boiling in water technique for a predetermined time i.e. 15 min. The egg slices were prepared with spice extract at different levels of 2%, 5%, 7% and 10%, out of which 5% was found acceptable by sensory evaluation. The egg slices with 5% spice extract were then subjected to frying in different oils such as mustard oil, rice bran oil, sunflower oil and soya bean oil. Among all of the fried egg slices and control (without any spice extract and frying), on sensory evaluation, fried egg slices with mustard oil was most preferred. Texture analysis results shows that hardness was increased on frying and highest in fried egg slices with rice bran oil. Also the values for other TPA component viz. adhesiveness, cohesiveness, gumminess and chewiness were increased on frying as compared with control. Among the fried egg slices, highest values for adhesiveness, cohesiveness, gumminess was observed in egg slices with rice bran oil. However, chewiness of fried egg slices with sunflower oil was highest. It can be concluded from present study that the egg slices fried in mustard oil was organoleptically acceptable with good textural properties.

Hazard Analysis and Critical Control Point (HACCP) System

1. Identify hazards
 
 It is important to be able to identify the possible microbiological, chemical and physical hazards that can occur at every stage of the food business – from growth, processing, manufacture, storage and distribution, until the point where it is sold to the customer and eaten.

    ·    Microbiological Hazards : Any bacterium, virus, or protozoan that is capable of causing illness and that grows or may be carried on food. Well-known examples of bacteria are Campylobacter, Listeria and Salmonella. The most likely food-borne viruses are the Norwalk type viruses. Giardia is an example of a protozoan that may be food borne. It is important to have some understanding of the risks associated with different types of microbiological hazards.

    ·    Chemical Hazards : Examples include excessive or toxic amounts of heavy metals, chemicals, pesticides, herbicides, insecticides, vitamins, minerals, preservatives, disinfectants, detergents and cleaning compounds. Some hazards may be naturally present such as in green potatoes or taro and rhubarb leaves.

    ·    Physical Hazards : Objects that get into food, or are already present in food, may cause illness, injury or distress to the person eating it. Some examples are glass, metal fragments etc. Other contaminants such as hair or insects may be offensive but not necessarily a danger to health. They should nonetheless be considered and controlled

1. Food Labelling

Food labelling is the primary means of communication between the producer and seller of food on one hand, and the purchaser and consumer on the other.

Basic Terminology in Food labelling

‘‘Food” means any substance, whether processed, semi-processed or raw, which is intended for human consumption, and includes drinks, chewing gum and any substance which has been used in the manufacture, preparation or treatment of “food” but does not include cosmetics or tobacco or substances used only as drugs.

‘‘Ingredient” means any substance, including a food additive, used in the manufacture or preparation of a food and present in the final product although possibly in a modified form.

Abstract

Nanotechnology deals with understanding and control of matter at 1-100 nm dimensions. Nano-sized materials have been part of everyday life in the form of biological entities and processes. Many of the structural building elements in foods are colloids in nature and are built up as a result of self assembly of nano-sized molecules in particles or at interfaces. The most important food raw materials-proteins, starches and fats undergo structural changes at the nanometer and micrometer scales during normal food processing. Unique phenomena occurring at this length scale are being exploited for novel food applications. Functional foods are products, in food or drink form, which influence specific functions in the body and thereby offer benefits for health, well-being, or performance beyond their regular nutritional value. Nanotechnology promises to provide means of altering and manipulating food products to efficiently deliver nutrients like proteins and antioxidants for precisely targeted nutritional and health benefits. Nanotechnology applications for functional food ingredients and additives offer range of benefits to the consumer in terms of innovative, tasteful and healthy food products. Nanoencapsulation systems aid smart protection and delivery of bioactives so as to ensure their stability, taste, colour, safety and bioavailability. The advent of nanotechnology has opened up innovations in food packaging with improved stability and barrier properties. However, need exists to develop regulatory systems for managing any risks associated with functional nanofoods and the use of nanotechnologies in the food industry.