eChapters

4.1    Importance of Banana in International Trade
    
4.2    Major Exporting Countries
    
4.3    Major Importing Countries
    
4.4    World Market Structure for Fresh Bananas
    
4.5    Domestic Trade
    
4.6    Banana Trade Wars : A Glimpse
    
4.7    Fair Trade Bananas

Most banana producers in Africa, Latin America and Asia are small-scale farmers who grow bananas either for home consumption or local markets. Because bananas and plantains produce fruit year-round, they provide an extremely valuable food source during the hunger season (when the food from one annual/semi-annual harvest has been consumed, and the next is still to come). Bananas and plantains are therefore critical to global food security. However, the export trade of banana depends mainly on commercial plantations in Latin America, East Asia and Africa. These plantations are owned by multinational corporations.

6.1    Phytochemicals
    
6.2    Health Benefits  and Therapeutic Properties of Banana
    
6.3    Validation of Health and Therapeutic Claims

7.1    Pre-Harvest Factors Responsible for Post Harvest Losses
    
7.2    Harvesting Method
    
7.3    Post-Harvest Causes Responsible for Losses

8.1    Climatic Conditions
    
8.2    Water
    
8.3    Spacing
    
8.4    Crop Nutrition
    
8.5    Pests and Diseases
    
8.6    Bunch Covering
    
8.7    Maturity and Maturity Indices
    
8.8    Maturity vs Shelf life and Quality
    
8.9    Pre-Harvest Sprays
    
8.10    Harvesting

9.1    Temperature
    
9.2    Relative Humidity
    
9.3    Physical Damage
    
9.4    Microbial Load
    
9.5    Packaging
    
9.6    Transportation

10.1    Respiration
    
10.2    Effect of Ethylene on Ripening
    
10.3    Transpiration Loss
    
10.4    Postharvest Biochemistry of Banana
    
10.5    Postharvest Pathology of Banana

11.1    Maturity Indices
    
11.2    Harvesting and Field Handling
    
11.3    Packhouse Operations
    
11.4    Packaging
    
11.5    Precooling

12.1    Shelf Life
    
12.2    Pre-Treatments Vs. Shelf Life/Storage (Hot Water, Fungicides, Coatings and other Chemicals)
    
12.3    Surface Coatings
    
12.4    1-MCP Gas Exposure
    
12.5    Use of Botanicals
    
12.6    Other Chemicals/Methods
    
12.7    Evaporative Cool Storage
    
12.8    Modified Atmosphere Storage (MAS)
    
12.9    Controlled Atmosphere Storage (CAS)
    
12.10    Vacuum Packaging
    
12.11    Hypobaric Storage
    
12.12    Irradiation
    
12.13    Chilling Injury (CI)

13.1    Biochemical Changes During Banana Ripening
    
13.2    Commercial Ripening

By definition, minimal processing would encompass any procedure, short of traditional complete preservation procedures (heat sterilization etc.) that adds value to the fruit or vegetables (Floros, 1993). Other terms used to refer minimally processed products are lightly processed, partially processed, fresh processed, fresh cut and prepared. Minimally processed fruits and vegetables are products those have the attributes of ‘fresh-like’ quality. A number of minimally processed products of fruits and vegetables are now being produced like peeled and sliced potatoes, shredded lettuce and cabbage, washed and trimmed spinach, chilled peach, mango, banana, melon and other fruit slices, vegetable snacks such as carrot and celery stick  and cauliflower and broccoli florets, packaged mixed salads, cleaned and diced onion, peeled and cored pineapple, fresh sauces, peeled citrus fruits and microwaveable fresh vegetable trays. Minimal processing of fruits and vegetables has two purposes. First, it is important to keep the product fresh but convenient without losing its nutritional quality. Second, the product should have a shelf life sufficient enough to facilitate distribution within the region of consumption. The microbiological, sensory and nutritional shelf life of minimally processed fruits and vegetables should be at least 4-7 days but preferably even longer (Ahvenainen, 2000).

15.1    Banana Chips/Crisps
    
15.2    Banana Puree/Pulp
    
15.3    Banana Flour
    
15.4    Banana Powder
    
15.5    Banana Flakes
    
15.6    Banana Figs or Dehydrated Banana
    
15.7    Banana Jam
    
15.8    Ready-To-Serve (Rts) Beverage
    
15.9    Banana Beer and Wine
    
15.10    Banana Vinegar
    
15.11    Banana Catsup
    
15.12    Banana Inflorescence Relish
    
15.13    Candied Banana
    
15.14    Other Banana Based Products

16.1    Banana Alcohol
    
16.2    Banana Pseudostem Fibre and Fibre Reinforced Products
    
16.3    Banana Pseudostem Juice
    
16.4    Banana Starch
    
16.5    Banana Waste for Mushroom Production
    
16.6    Paper and Pulp from Banana Waste
    
16.7    Vermicompost and Vermiwash from Banana Waste
    
16.8    Animal Feed from Banana Waste
    
16.9    Banana Leaf

Key Facts
    
·    The United Nations Framework Convention on Climate Change (UNFCCC) defines ‘climate change’ as a ‘Change of climate which is attributed directly or indirectly to human activity that alters the composition of the global atmosphere and which is in addition to natural climate variability observed over the comparable time periods’.
    
·    The main green house gases (GHGs) that have caused the global climate change or global warming are carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (N₂O).
    
·    CO₂ is the principal anthropogenic GHG that affects the earth’s radiative balance. It is the reference gas against which other GHGs are measured and therefore has a Global Warming Potential (GWP) of 1. CH₄ and N₂O have a GWP of 21 and 310 respectively.
    
·    CO₂ is responsible for most of the enhanced green house effect of more than 50%, CH₄ for about 10-15% and N₂O for about 8%.
    
·    The global atmospheric concentrations of CO₂, CH₄ and N₂O have increased since 1750. While CO₂ increased from a pre-industrial value of 280 ppm to 379 ppm in 2005, CH₄ increased from 715 ppb to 1774 ppb and N₂O increased from 270 ppb to 319 ppb during the same period.

Key facts

Agriculture
    
·    Agriculture production (plant growth) is highly dependent on climate since crop growth is influenced by solar radiation, temperature and precipitation and sensitive to climate variability and weather extremes (droughts, floods, severe storms).
    
·    Climate change is projected to have an effect on local agriculture and the net result could be harmful (e.g. frequent droughts, salinization of agriculture land due to sea level rise) or beneficial, (e.g. enhance CO₂ and higher yield, longer growing season, increased precipitation) or mixed.
    
·    Climate change or a doubling of GHGs (2 x CO₂) is projected to cause both gains and losses of agriculture land.
    
·    Each crop has a specific temperature range at which vegetative and reproductive growth will proceed at the optimal rate and exposures to extreme temperatures during these phases can impact growth and yield. Higher temperatures during the reproductive stage of development can affect pollen viability, fertilization and grain or fruit formation. 
    
·    Warming generally allow plants to grow faster that are below their optimum temperature, however for cereal crops faster growth means there is less time for the grain itself to grow and mature, reducing yields. 
    
·    Night-time temperatures are rising faster than daytime temperatures and are expected to continue rise in the future. According to International Rice Research Institute (IRRI), Philippines, the rise of night time temperature decreases rice yield by 10% for each 1°C increase in growing-season night time temperature in the dry season.

Key Facts
        
Agricultural food
    
·    There are multiple pathways through which climate-related factors may impact food contamination and food safety, food quality, foodborne diseases including changes in temperature and precipitation patterns, increased frequency and intensity of extreme weather events, ocean warming and acidification and changes in the transport pathways of complex contaminants.
    
·    All or most foodborne pathogens and their associated diseases are linked to changing environmental conditions, the notable of which are campylobacteriosis, salmonellosis and vibriosis.
    
·    An estimated 30% of reported cases of salmonellosis across much of continental Europe have been attributed to warm temperatures, especially when they exceed a threshold of 6°C above average. Likewise both in Australia and Canada a positive correlation was found between increasing temperature and incidence of salmonellosis.
    
·    Zoonosis such as Rift Valley Fever (RVF), West Nile Fever, tick-borne diseases and non-zoonotic animal diseases such as Blue tongue, African horse sickness, African swine fever are examples of animal diseases whose distribution is expected to be strongly influenced by climate change and variability.
    
·    Mycotoxin is a toxic secondary metabolite produced by filamentous fungi, commonly known as moulds and may contaminate agricultural commodities (food) by growing on them both before and after harvest, whenever the humidity and temperature are permissive. The most prominent mycotoxins are aflatoxins, deoxynivalenol, zearalenone, ochratoxin-A, fumonisin, and patulin.
    
·    The humans ingestion of mycotoxins occur through consumption of the mycotoxin contaminated plant-based foods, such as grains, maize, barley, rice, coffee, nuts and their residues, and metabolites in animal-derived foods, for example aflatoxin M1 (AFM1) in milk and meat products. In addition, mycotoxins may occur in beer and wine.

Key facts
    
·    The Food and Agriculture Organization (FAO) defines food security as a ’situation that exists when all people, at all times, have physical, social and economic access to sufficient, safe and nutritious food that meets their dietary needs and food preferences for an active and healthy life’. There are four dimensions of food security: Food Availability (availability of sufficient food for all people at all times, i.e. production); Food Accessibility (physical and economic access to food at all times, i.e. affordability), Food Utilization (access to food that is nutritious, safe and produced in environmentally sustainable ways, i.e. nutrients in food and food safety); and Food Stability (reliability of adequate food supply).
    
·    Agriculture is important for food security since it provides food for the people and is the primary source of livelihood for 36% of the world’s total workforce. In the heavily populated countries such as Asia and the Pacific, about 40% to 50%, and in sub-Saharan Africa, about two-thirds of the working population make their living from agriculture.
    
·    Agriculture, livestock and fisheries production are all sensitive to climate and are affected by its changes. Climate change will increase hunger and malnutrition, emergence of new pests and diseases and will threaten fishing and aquaculture industries.

Key facts
        
Agriculture and livestock
    
·    The Intergovernmental Panel on Climate Change (IPCC) defines adaptation as ‘adjustment in natural or human systems in response to actual or expected climatic stimuli or their effects, which moderates harm or exploits beneficial opportunities’. The adaptation can be considered as tackling the effects of climate change, whereas mitigation is tackling the cause of climate change such as reducing the sources or enhancing the sinks of greenhouse gases. There could be different types of adaptation such as autonomous (spontaneous) and planned adaptation (policy decision).
    
·    Autonomous adaptation includes altering varieties and/or species those are more appropriate to the altered thermal regime or with increased resistance to heat shock and drought; altering the timing or location of cropping activities; altering fertilizer rates to maintain grain or fruit quality consistent with the climate and altering amounts and timing of irrigation and other water management practices; diversifying income by integrating other farming activities such as livestock raising, integrated agriculture and aquaculture/fish farming; development and use of varieties and species resistant to pests and diseases, wider use of technologies to ‘harvest’ water, conserve soil moisture (e.g. crop residue retention) and to use water more effectively in areas where rainfall is projected to decrease and using seasonal climate forecasting to reduce production risk.

Introduction

Horticulture plays a significant role in Indian Agriculture. It contributes 30% GDP from 11.73 % of its arable land area. India is the second largest producer of both fruits and vegetables in the world (52.85 Mt and 108.20 Mt respectively). Being rich source of carbohydrates, minerals, vitamins and dietary fibres these constitute an important part of our daily diet. The dietary fibres have several direct and indirect advantages. Not only this, fruits and vegetables provide a variety in taste, interest and aesthetic appeal. Their significance in human life is being recognised increasingly in societies with the objective of minimizing the occurrence of the diseases related with an affluent life style.

Ornamental Industry

Floriculture as a multi-billion dollar industry has been undergoing unique revolution in terms of production and marketing of high value ornamentals such as cut flowers, loose flowers, potted and foliage plants there by emerged as fully export oriented activity. Owing to the steady increase in demand of flowers, floriculture has become one of the important commercial businesses in horticulture. Presently, floriculture industry in India has been growing with compound annual growth rate of 25 percent over the past decade (Muthukumaran, 2009). It has been found that commercial floriculture has higher potential per unit area than most of the field crops and therefore, it is a lucrative business. Indian floriculture industry has been shifting from traditional flowers to cut flowers for export purposes.Maharashtra, Karnataka, Andhra Pradesh, Haryana, Tamilnadu, Rajasthan, West Bengal have emerged as major floriculture production areas. The export of floricultural products from India has been on an increase in the past five years due to high demand for floriculture products in importing countries. The estimated total area under floriculture in India is 2,82,000 ha. Tamil Nadu stands first followed by Karnataka and Andhra Pradesh, West Bengal, Maharashtra, Rajasthan, Delhi and Haryana. Approximately 16,57,000 metric tonnes of loose flowers and over 5,20,000 metric tonnes cut flowers are produced in India during 2015-16. Total export of floriculture products is 22,518 MT with value of 479 crores (APEDA, 2015). Major importers of ornamental products from India are USA, Germany, UK, Netherland, and UAE.

Introduction

Fresh fruits and vegetables are known for their nutritional and relishing nature. But, their fast perishability and season wise availability make them unavailable for a longer time. To enjoy and get benefited from their unique taste and nutritional value they are further preserved or converted into some value-added products such as jam, jelly, candies, juices, minimally processed fresh-cut fruits and vegetables, pickles etc. There are techniques which are developed to preserve them while in fresh and also when they are made into value-added products. Some require only one technique and other requires more than one in combination so that the product can be preserved for a longer period and available to maximum population even after their period of production/availability is completed.

Introduction

Packaging is the science, art and technology of enclosing or protecting products for distribution, storage, sale, and use. Packaging also refers to the process of design, evaluation, and production of packages. Packaging may be defined as the art and science which involves preparing the articles for transport, storage display and use. India is a land of large varieties of fruits and vegetables due to its vast soil and climatic diversity. With 38 and 71 million tons of production of fruits and vegetables, India is the second largest producer of fruits and vegetables next to Brazil and China respectively. Apart from the huge value addition and employment involved in these activities, packaging has served the Indian economy by helping preservation of the quality and lengthening the shelf life of innumerable products-ranging from milk and biscuits, to drugs and medicines, processed and semi-processed foods, fruits and vegetables, edible oils, electronic goods etc., besides domestic appliances and industrial machinery and other hardware needing transportation (FAO, 1985).

Abstract

The irradiation process involves exposing the food, either prepackaged or in bulk, to a predetermined level of ionization radiation. In this process, it is important to know sources of ionization radiation, how energy is quantified, and its scope with advantages and limitations.The traditional methods like preservation, such as drying, smoking and salting have been supplemented with pasteurisation (by heat), canning (commercial sterilisation by heat), refrigeration, freezing and chemical preservatives. ‘Food irradiation’ is another technology that can be added to the list. By realizing its importance present chapter highlighted with some basic aspects as well as its applications and other related aspects of food irradiation. Food irradiation involves basic principles like; Pasteurization (Pathogen Reduction) 2. Sterilization 3. Sanitation 4. Disinfestation. As concern to dosage can be applied as  low, medium and high based on type of radiation, type of food, type of packaging material and time of application. It has broader range of application in preservation with this also has few limitations which have become bottlenecks in this technology. Though technology is employing much in developed countries rather than developing once. Prospectus should be given in those countries also.

Abstract

Being a great nutrient rich fruit, Dragon fruit has fetched a worldwide attention already and started to emerge as an important cash crop in global market. But the fine tuning between the scheduling of supply and market demand is greatly influenced by postharvest management and storage techniques of the fruit as the fruit has a short storage life. In this review, effect of diversified storage and packaging techniques on the different post harvest quality of fruits viz. fruit firmness, skin colour, its nutritional quality and susceptibility to disease pest during storage is investigated. And it was seen that various alternative and innovative modern techniques such as introduction of  plastic film, plastic crate packaging, modified atmospheric storage, different chemical application and application of edible chitosan coating are proven as effective to extent the durability of storage that widen the room for transport and marketing. Finally it can be said that the advantage of growth in dragon fruit consumption and marketing can be more harnessed through understanding the missing links between harvest and post-harvest handlings and integrating the traditional and modern postharvest approaches.

Introduction

Canning is the general term applied to the process of packaging a food in a container and subjecting it to a thermal process for the purpose of extending its useful life. An optimal thermal process will destroy pathogenic (disease-causing) Bacteria, kill or control spoilage organism present and have mineral impact on the nutritional and physical quality of the food. Although we thing of canning in term of steel or possible aluminium cans, the principle apply equally well to a variety of food containers such as glass jar, plastic and foil laminated pouches, semi rigid plastic tray or bowls, as well as metal cans of any one of several shapes, including cylindrical, oval, oblong or rectangular. The concept of aseptic packaging (sterilizing the food and the container prior to filling and sealing) also follows the same principles.

Bakery Industry

Baked goods have been around for thousands of years. The art of baking was developed early during the Roman Empire. It was a highly famous art as Roman citizens loved baked goods and demanded for them frequently for important occasions such as feasts and weddings etc. Due to the fame and desire that the art of baking received, around 300 BC, baking was introduced as an occupation and respectable profession for Romans. The bakers began to prepare bread at home in an oven, using mills to grind grain into the flour for their breads. The oncoming demand for baked goods vigorously continued and the first bakers’ guild was established in 168 BC in Rome. This drastic appeal for baked goods promoted baking all throughout Europe and expanded into the eastern parts of Asia. Bakers started baking breads and goods at home and selling them out on the streets.

This trend became common and soon, baked products were getting sold in streets of Rome, Germany, London and many more. This resulted in a system of delivering the goods to households, as the demand for baked breads and goods significantly increased. This provoked the bakers to establish a place where people could purchase baked goods for themselves. Therefore, in Paris, the first open-air bakery of baked goods was developed and since then, bakeries became a common place to purchase delicious goods and get together around the world. By the colonial era, bakeries were commonly viewed as places to gather and socialize.^[2] World War II directly affected bread industries in the UK. Baking schools closed during this time so when the war did eventually end there was an absence of skilled bakers. This resulted in new methods being developed to satisfy the world’s desire for bread. Methods like: adding chemicals to dough, premixes and specialized machinery. Unfortunately these old methods of baking were almost completely eradicated when these new methods were introduced and became industrialized. The old methods were seen as unnecessary and financially unsound, during this period there were not many traditional bakeries left.

Bakery is a traditional activity and occupies an important place in food processing industry. The bakery manufacturers in India can be differentiated into the three broad segments of bread, biscuits and cake. About 1.3 million tonnes of the bakery products industry in India is in the organized sector out of 3 millions tonnes, while the balance comprises of unorganized, small-scale local manufacturers. Though, there are sufficient automatic and semi-automatic bread as well as biscuit manufacturing units in India but there are still number of people prefer fresh bread and other products from the local bakery. After entry of Pizza and Burgers’ MNCs in the country, people are changing their tastes also. Today, they are not restricted to bread, cake and biscuits but to other bakery products also. The consumers are increasingly going for newer options with respect to bakery products. With the ventures of few Companies like Britannia, Biskfarm, and Morish etc. competition has increased. Also, the Indian market is witnessing the proliferation of bakery cafe chains in the form of Baristacafe, coffee day, Café Coffee & Monginis etc.

Armed with better technology, know-how and novel ideas, these foreign companies have made rapid inroads into the lucrative market within a very short span of time. Though the demand for bakery products in India has always been on the rise, there is clearly a lack of awareness and the will to break new ground, which has helped global players to gain brownie points while exploring the market in India. The unorganized sector accounts for about half of the total biscuit production estimated at 1.5 million tonnes. It also accounts for 85 per cent of the total bread production and around 90 per cent of the other bakery products estimated at 0.6 million tonnes. The last includes pastries, cakes, buns, rusks and others.

Types of Bakery Products

Baked goods are produced from either doughs or batters which are a mixture of flour and water made by mixing, beating, kneading or folding. The processing method depends on the ingredients being used and the product being made. Bread is either leavened or unleavened. Leavened bread is made from a mixture of flour, yeast, salt and water. Unleavened bread does not contain yeast and therefore does not rise. It is flat bread that is quicker to make than yeast-bread.

Baking is no different from any other area of cooking, and as in other sectors only the best and the freshest raw material can guarantee good results. So selection of right kind of ingredients is of utmost importance. Another basic need of a professional baker and confectioner is to purchase the equipment required. The design and size depends upon the volume of sale expected. So in this chapter we are going to learn about the ingredients required for running a bakery.

The word biscuit is derived from Danis biscoctus which is Latin for twice cooked bread and refers to bread rusks that were made for mariners (ships biscuits) since the Middle Ages. The dough pieces were baked and then dried out in another cooler oven. All biscuits are made with flour (usually wheat flour) and all have low moisture content and thereby have long shelf life if protected from moisture and oxygen. It includes items also known as crackers (that make a noise of cracking when broken), Hard sweet and semi –sweet biscuits, cookies (which is the name that originated from Dutch word koekje meaning a small cake) and wafers, which are baked between hot plates from a fluid batter. The name cookie was adopted in North America where the term ‘biscuit’ can be confused with small soda raised breads or muffins. In other countries the term cookie is used primarily for wire cut products of rather rough shape, which often contain large pieces of various ingredients such as nuts, etc. The term ‘biscuit’ is used in Britain to describe a flat, crisp, baked product; the term cookie is reserved for something softer and thicker. Cookies are made from soft wheat flour and are characterized by formula high in sugar and shortening and relatively low in water. Similar product is known as biscuit in our country. In USA the term ‘cookie’ covers any flat, crisp, baked good. Cracker is a term reserved for biscuit of low sugar and fat content, frequent bland or savoury. Crackers are usually made from developed dough whereas cookies are made from weaker flour. These foods have in common their ability to stay palatable for a long period of time. Their ease of transportation and their ready consumption without any further preparation make them high on the list of staple snacks

Cakes are sweet baked products characterized by high level of sugar in the formulation and hence are foods of high calorific value. Among the various ingredient used flour, sugar, shortening and egg are the essential ingredients for cake manufacture. The optional ingredients are baking powder, milk, fruit etc. For cake manufacture the selection of ingredients is of paramount importance.

All bread is made by baking a dough that has two basic ingredients, flour or meal and a liquid. Bakers can use a wide variety of both components. The most common type of flour used for bread and most other baked goods is made from wheat. Wheat flour has a pleasant taste and contains a large amount of an elastic protein substance called gluten. Gluten aids in baking uniformly light bread that rises (swells) properly. Other baking flours are made from barley, rye, corn, rice, oats, soybeans, and potatoes. These flours, particularly soybean flour, may equal wheat nutritionally, but none can match wheat for creating light, even-textured bread. Hard wheat flour makes lighter bread than does soft wheat flour because it is richer in gluten. Rye and whole wheat breads are made lighter by adding white flour. The liquids used in baking include water, sweet or sour milk, yogurt, wine, and beer.

Bread is either leavened or unleavened. Leavened breads contain some substance that produces bubbles of carbon-dioxide gas. These gas bubbles inflate the dough, causing it to rise and become light and porous. Most kinds of basic breads are leavened with a fungus called yeast. Biscuits, muffins, and cakes and other pastries are leavened with either baking powder or baking soda. Unleavened bread is dry and hard. Familiar kinds of unleavened breads include water crackers, the rye crisp of Sweden, and Jewish matzoth. Whether leavened or unleavened, most breads contain other ingredients in addition to flour and a liquid. An almost limitless variety of breads can be made by adding a sweetener, shortening, cheese, eggs, meat, fruit, vegetables, seeds, or nuts. A sweetener, either sugar or syrup, is used in almost all bread for its taste or as an aid to yeast growth. Bread may also have an external sweetener in the form of a decorative glaze. The high fat content of shortening and cheese increase tenderness and flakiness in bread. Perhaps the best example is the French croissant. Eggs help leaven bread dough by adding to the bread’s lightness. They can be brushed on top of the dough before baking to create a shiny crust, as in the Jewish hallah. Some breads from many nations contain fruit, a vegetable, meat, seeds, or nuts. Examples include the fruit scone of Great Britain, the spinach paratha of India, the Southern sausage bread of the United States, the Easter sesame bread of Greece, and the almond sweet bread of Finland.

Various types of equipment are needed and used to facilitate the process of baking. Depending upon the use, equipment may be as light equipment and heavy equipment.

The raw material of foremost importance in bakery product is the wheat flour. Bakery units prefer the flour obtained by milling in roller flourmill with 70– 72 percent extraction. Flour quality may be defined as the ability of the flour to produce an attractive end product at competitive cost, under conditions imposed by the end product manufacturing unit. The concept of quality differs from producer and consumer point of view. However, in general, the term quality may refer to fitness of a raw material or a product for a particular process or consumer. For a consumer, the following parameters are important criteria of a product quality.

Sugar confectionery and chocolate includes candies (sweets in British English), candied nuts, chocolates, chewing gum, bubble gum, pastillage, and other confections that are made primarily of sugar. In some cases, chocolate confections (confections made of chocolate) are treated as a separate category, as are sugar-free versions of sugar confections. The words candy (US and Canada), sweets (UK and Ireland), and lollies (Australia and New Zealand) are common words for the most common varieties of sugar confectionery. Confectionery depends on numerous ingredients which have been discussed in detailed in this chapter

Chocolate is a key ingredient in many foods such as milk shakes, candy bars, cookies and cereals. It is ranked as one of the most favourite flavours in North America and Europe. Despite its popularity, most people do not know the unique or igins of this popular treat. Chocolate is a product that requires complex procedures to produce. The process involves harvesting coca, refining coca to cocoa beans, and shipping the cocoa beans to the manufacturing factory for cleaning, conching and grinding. These cocoa beans will then be imported or exported to other countries and be transformed into different type of chocolate products.

In history, 1828 marked the “modern era” of chocolate making when Dutch chocolate maker Conrad J. van Houten patented an inexpensive method for pressing the fat from roasted cacao beans along with other processes to create a fine powder known as “cocoa”. The powder was then treated with alkaline salt that helped the powder mix with water easily. The creation of powdered chocolate made it easier to mix with water, sugar and a possible combination of other ingredients to make chocolate in solid form. Many other chocolate makers began to build on Van Houten’s success to make a variety of chocolate products. In 1894, English chocolate maker Joseph Storrs Fry produced what was arguably the world’s first eating chocolate”

Types of Confectionery

Confectionery also called sweets or candy is sweet food product. Confectionery is divided into two broad and somewhat overlapping categories, Bakers’ Confections and Sugar Confections. Confections are low in micronutrients and protein but high in calories. They may be fat-free foods, although some confections, especially fried doughs, are high-fat foods. Many confections are considered to give empty calories.

Baker’s Confectionery

Baker’s confectionery also called flour confections includes principally sweet pastries, cakes, and similar baked goods. In the Middle East and Asia, flour-based confections are more dominant. Baker’s confectionery includes sweet baked goods, especially those that are served for the dessert course. Baker’s confections are sweet foods that feature flour as a main ingredient and are baked. Major categories include cakes, sweet pastries, doughnuts, scones, and cookie.

Chemically, sugar candies are broadly divided into two groups: crystalline candies and amorphous or non crystallized candies. Crystalline candies are not as hard as crystals of the mineral variety, but derive their name and their texture from their microscopically organized sugar structure, formed through a process of crystallization, which makes them easy to bite or cut into. Fudge, creams, and fondant are examples of crystalline candies. Amorphous candies have a disorganized crystalline structure. They usually have higher sugar concentrations, and the texture may be chewy, hard, or brittle. Hard candies, such as lollipops, caramels, nut brittles and toffees are all examples of amorphous candies, even though some of them are as hard as rocks and resemble crystals in their overall appearance. Crystalline candies are chemically described as having two phases, because the tiny, solid sugar crystals are suspended in a thick liquid solution. These are also called grained candies, because they can have a grainy texture. Amorphous candies are have only one phase, which is either solid or liquid, and do not have a grainy texture, so they may be called ungrained.

Commercially, candies are often divided into three groups, according to the amount of sugar they contain:

Chocolate is a product that requires complex procedures to produce. The process involves harvesting coca, refining coca to cocoa beans, and shipping the cocoa beans to the manufacturing factory for cleaning, roasting, grinding , ref ining , conching , moulding and enrobing operations which are accomplished using wide range of machinery. A few have been discussed in this chapter.

1. Bean Roasters

When cocoa beans were first brought to Europe, the method of roasting was quite simple, often consisting of no more than metal trays suspended by chains over a fire, an ancient Middle Eastern technique for roasting coffee. The beans would be stirred by hand with a long stick or paddle until the roast was complete. Needless to day, this was very labor intensive and inefficient. Clearly, something more efficient was needed. The next development in roasting technology was not that far distant from roasters in use today. Metal cylinders or balls that could hold up to several pounds of cocoa beans would be suspended over the embers of a fire. A rod would run through the center and act as an axis upon which the roaster would turn. A hand crank on one end would allow the cylinder or ball to be turned while the beans were roasting. The result was a much more even roast than was before possible. Aspects of this technique remain in many of today’s roasters.

India’s bakery market at 49.5 billion tonnes makes it the third largest market in Asia Pacific, only after Japan and Australia. 72 The bakery industry in India comprises of organized and unorganized sectors. The organized sector consists of large, medium and small-scale manufacturers who produce packaged biscuits and bread. The unorganized sector consists of small bakery units, cottage and household type manufacturing their goods without much packaging and distributing their goods in the surrounding areas. Bread market is estimated to be growing at around 7% p.a. in volume terms, whereas the biscuit market has witnessed a higher growth at around 8–10%. Within the biscuit category, cream and specialty biscuits are growing at a faster rate of 20% p.a. The per-capita consumption of biscuits in India is around 900 gm as compared to 15–20 kg. for developed countries. The consumption of biscuits is equally divided between the urban and rural population. Demand for biscuits in 2003–2004 is likely to exceed 1.2 million tonnes.

The art of confectionery manufacture date back to over 3000 years as per Egyptian records. Traditionally honey, boiled and concentrated sugar cane juices have been used in confectioneries. In modern times, alternative sweeteners from sources like corn and starches constitute an integral part of confectionery manufacture.

Owing to the huge variation in finished products as well as raw materials in food sector, Quality control has an extremely important role to play. Quality control aims at controlling variation to within a tolerable level by taking corrective actions. Statistical and non-statistical techniques are employed to measure, analyze and control variation in food products. Statistical process control, acceptance sampling and visual inspection are widely used in food and allied sectors.

Maintenance of quality and manufacture of a standard confectionery should involve a very close control of raw materials, instrumentation, and statistical analysis of finished product. Statistical evaluation with respect to finished product includes weight control, sensory evaluation and packaging tests. The quality standards are set by the quality control departments. Chemists may undertake preliminary analysis through visual inspection. Visual inspection is usually combined with sampling. This gives an idea of variation, cleanliness, infestation etc. in the sample.

1. Introduction

Osmotic dehydration is a useful treatment of dehydration compared to the other dehydration processes, as other dehydration processes bring adverse and irreversible changes in physical and nutritional status of food material. Recently in many studies it was found out that since plant membranes are semi-permeable in nature, not only moisture but transfer of solute from osmotic solution to the food material also takes place. Another kind of transfer which was also noticed is the leaching of micronutrients from the cells of food to the osmotic solution, but the amount being very low, this transfer can be neglected. (Mayor et al., 2006). The mass transfer kinetics was studied for different food materials (Hawkes and Flink, 1978). Effect of different variables such as pressure and temperature were also studied (Rastogi and Niranjan, 1998). The effective diffusivities for both water loss and solute gain can be calculated by using various methods which gives the rate of diffusion of solute and moisture for the food material. The finding of solute gain and leaching of micronutrients pointed the requirement of maintaining the osmotic dehydration process, which could be done by maintaining the process variables of osmotic dehydration. Impact of various process variables on osmotic dehydration and their best levels at which maximum water loss and minimum solute gain could be obtained had to be calculated out. For this purpose, optimization of process variables through response surface methodology (RSM) could be best utilized (Uddin et al. , 2004). RSM is a statistical tool which gives the random combinations of input variables to give the best output result as required. Various works have been done on optimization of process conditions of osmotic dehydration taking different samples of foods. In this study, bamboo shoot species (Bambusa balcooa) was taken as sample for osmotic dehydration to optimize the process variables for osmotic dehydration of bamboo shoots using salt as osmotic agent followed by calculation of effective diffusivity of water and solute during osmotic dehydration of bamboo shoot.

1. Introduction

Cherry peppers (Capsicum frutensis var. cerasiforme) which is locally known as dallae khorsani, is one of the important cash crops of Sikkim and Darjeeling hills. They are small, round shaped, fleshy and heavily seeded. They are green in color in early stage of fruiting and turn red when fully matured. It is an excellent source of vitamin A and C, which are important antioxidants (Howard et al., 1994). Cherry peppers are an ideal size for pickling or brining. Its hotness ranges from moderately mild to very high.

Due to its high moisture content (about 85% w. b. ), shelf life of cherry pepper is limited to 7 - 10 days. This makes it rare and costly during the off season. Hence, preservation of cherry peppers is of considerable importance both to the farmers as well as to the consumers. Drying is one of the oldest methods for preservation of cherry peppers to make it available throughout the year. To increase shelf life of chilies, drying up to 10 % moisture content (dry basis) is required which is accepted in export market.

For drying chillies, sun and hot air drying are the most common drying method used. However, due to the prolonged drying time of 16-48 h, the quality of the dried chillies is reduced (Kim et al., 2002). Many researchers paid more attention to innovative techniques such as short and medium-wave infrared radiation drying (SMIR) which not only maintain product quality, but also increase the drying rate. Moreover, infrared drying could save up 50% energy compared to convective drying (Nowak & Lewicki, 2004). The ability of infrared radiation to penetrate and heat the inner layers results in higher rate of heat and mass transfer (Ginzburg, 1969).

1. Introduction

Rasogolla is a sweetened dairy product which is made from milk mainly from casein protein. Generally rasogolla is made by heating the raw milk around 80-850C ,then slowly cool the milk around 650C and acid coagulation of the milk is done. Then separate the channa (mainly casein) and whey, and drained the whey followed by the pressing of the channa to remove the excess water. Then channa is thoroughly kneaded and are rolled to balls and cooked in sugar syrup and get the rasogulla. Total value of 1000 billion for Indian dairy output in 2001, the output of traditional dairy products is estimated at over 400 billion. The share of the organized sector in the indigenous products is at present only 50 billion only (Patil, 2005).

1. Introduction

The Refractance Window drying system uses circulating hot water, usually at 90°C and at atmospheric pressure, so that it can carry the thermal energy to the material to be dehydrated. Thermal energy is transferred to the wet product from circulating hot water through a plastic interface which is transparent to the infrared radiation. The actual product temperature is kept below 70°C. The heated water is recycled and reused, which helps in improving the thermal efficiency of the system. The use of hot water as the heat transfer medium and at temperatures just below boiling is a design feature that is unique to this drying method. In RW drying, there are three modes of heat transfer, namely conduction, convection, and radiation. The process water is heated by steam within an insulated tank and then circulated in shallow troughs to transfer thermal energy to the plastic conveyor. As the plastic conveyor is very thin, it reaches the temperature of hot water flowing beneath it almost immediately. By conduction and radiation, the thermal energy from the hot water is transmitted through the plastic conveyor. The use of process water at temperatures just below boiling and a thin plastic conveyor with infrared transmission in the wavelength range that matches the absorption spectrum for water all work together to facilitate rapid drying.

1. Introduction

The term nanotechnology was first coined by Norio Taniguchi in 1974 to describe controlled thin film deposition (Taniguchi, 1974). Nanotechnology is now generally recognized to include materials with a size in at least one dimension in the 1-100 nm range, although this terminology is not strictly enforced (Rao, 2008). In food science, there are many types of naturally occurring particles that fall within this size range and the use of a strict definition is problematic due to the large distribution of sizes (Kruif, 1998). Many natural foods contain nanoscale components and their properties are determined by their structure. These have been eaten safely for generations. In fact, some of food’s most important raw materials (proteins, starches, and fats) undergo structural changes at the nanometre and micrometre scales during normal food processing(Morris and Parker 2008). Food proteins (for example, native beta-lactoglobulin, which is about 3. 6 nm in length) can undergo denaturation (via pressure, heat, pH, etc. ) 

1. Introduction

Jackfruit is the largest edible tree borne fruit in the world (Baliga et al., 2011). According to Haq (2006) India is considered as the birth place of jackfruit. The major jackfruit producing states in India are Assam, Tripura, Bihar, Uttar Pradesh, the foothills of the Himalayas and South Indian States of Kerala, Tamil Nadu and Karnataka. Jackfruit is a fruit prized in some areas of the world and allowed to go waste in others. According to Sidhu (2012) the extent to which jackfruit is being wasted in India is not exactly documented however, the wastage is approximately 75%. On an average a fully developed fruit may weigh 10-25 kg. Seeds occupy around 10 to 15% of the total weight of the jackfruit (Bobbio et al., 1978). It is reported that jackfruit seeds contain high amount of protein, fiber and carbohydrate (Ocloo et al., 2010). The seeds are viable for not more than three or four days (Sidhu, 2012). According to Abedin et al. (2012) the industrial utilization of jackfruit pulp are varied but the seeds are discarded from those food industries. Moreover, mature fresh seeds cannot remain fresh for long as they tend to germinate easily. So, converting jackfruit seed into flour is an option in order to increase the shelf- life of the seed and can substitute various cereal based flours for developing food products. Dumpling is a type of food which is made out of small pieces of dough wrapped around a filling that may include vegetables, meat, or other ingredients mixed together.

1. Introduction

With increase in consumer awareness and lifestyle the interest for health promoting natural food ingredients has expanded in recent years. However, globally it has become a great challenge to the manufacturers to ensure that such compounds should remain in their active form during processing and storage with an emphasis to its bioavailability profile. Oxidative stress is the major contributor to the pathogenesis of a number of chronic and degenerative diseases including atherosclerosis, Alzheimer’s and Parkinson’s disease, diabetes, DNA damage, carcinogenesis, cardiovascular and neuro degenerative diseases, allergies, premature ageing etc. (Gupta et al. , 2014; Svetli et al. , 2010). Endogenous antioxidant defense mechanisms are not always sufficient to fully scavenge the free radicals formed in the body during various processes. Therefore, dietary components having antioxidant properties, such as tea flavonoids, are very much necessary to supplement the activity of endogenous antioxidants. Tea is one of the most concentrated sources of flavonoids and phenolic acids which show antioxidant activity by sequestering metal ions and by scavenging reactive oxygen and nitrogen species (Frei & Higdon, 2003).

1. Introduction

The growing prevalence of obesity and obesity associated disorders as well as its impact on public health has received increased attention in recent years. As a result, obesity is now considered one of the world’s leading public health problems. A study published in the noted medical journal Lancet says India is just behind US and China in this global hazard list of top 10 countries with the highest number of obese people. The study - titled ‘Global, regional, and national prevalence of overweight and obesity in children and adults during 1980-2013: A systematic analysis for the Global Burden of Disease Study 2013’ - used data collected by international bodies and organizations in various countries like India over three decades. China and India together accounted for 15 per cent of the world’s obese population, with 46 million and 30 million obese people, respectively. According to the study, the number of overweight and obese people globally increased from 857 million in 1980 to 2. 1 billion in 2013. This is one-third of the world’s population.

With lifestyle disorders forcing more and more people to reel under excess body weight, even relatively younger people are developing joint disorders and knee pain. Excessive weight is associated with a series of health problems, including blood pressure, diabetes, and cardiovascular ailments. Therefore there in an urgent need to envision effective anti-obesity strategies through effective interventions.

1. Introduction

Cassava (Manihot esculenta Crantz) is a tuberous root crops. It is known as “U mangra” in Manipuri. It is also known as mandioca or tapioca, yucca, mosioc. Cassava belongs to Euphorbiaceae family The cassava plant is of perennial woody shrub in nature. (CGIR 2011; FAO-2015, Zhu 2015). Like paddy and wheat as staple food crops, cassava is also staple food crops for many countries. It supports millions of population especially in South American and African countries. It is also known as food security crop because of its ability to withstand harsh environmental conditions when other food crops cannot sustain and destroy. It can grow in low fertility soil, marginal land with less agricultural maintenance. It resists to pest and diseases so cultivation is easy to carry out with less expenditure. Cassava is abundantly grown in Manipur mostly in hilly areas. To some extent, it is consumed as snacks item either by burnt in fire or charcoal or boiled form with little addition of salt. The fresh young leaves and roots after removing its cover is used as ingredients of “singju” a salad type traditional snack items of Manipur. Out of cassava sweet snack item locally called “manghra heingan” in Manipur is also prepared. For making this sweet item, cassava is boiled with sugarcane molasses until it is cooked and reach certain sugar consistency of molasses. This sweet item is similar with murabba available in Indian market.

1. Introduction

Kiwi fruit (KF) is very much acceptable for preservation by freeze-drying (FD) technique, since it has very much health benefits such as low calorific value, low glycemic index (GI), more vitamins (particularly vitamin C), maximum load of potassium, presence of variety of pigments, few important enzymes, low allergic response (AR) and finally it is rich in natural antioxidants, polyphenols. It is translucent, green pulp and many black seeds arranged nicely with covered by hairy and brown skin. The KF seeds are small sizes and black colored surround inner circularly through the whole pulp. It gives a nice crunch during consumption and provides a number of essential nutrients. Therefore, it will be remembered that seeds cannot be discarded during processing of KF unlike other fruit (jamun etc. ) seeds.