eChapters

In this chapter, the importance of seafood in terms of their nutrition, and different methods of processing are dealt. Seafood quality and safety terminologies are explained briefly. The quality parameters affected by rigor mortis in raw, iced and cooked fish are given. Phenomenon of gaping described with reference to rigor mortis. Quality dimension of seafood is explained with intrinsic and extrinsic parameters. Various intrinsic factors affecting seafood quality such as f ish species, seasonal changes, parasite infestation and capture conditions are discussed in detail. The next part elucidates the sensory parameters affecting the seafood quality describing the objective and subjective method of quality assessments. Objective method covers both descriptive and discriminative tests. The final part mentions the Codex guidelines available for the conduction of seafood sensory assessment. At the end, the reader gains the knowledge on the basic information about seafood, role of rigor mortis in affecting seafood quality and the sensory quality assessment methods.

Objective

To learn the nutritional importance of seafood and their processing; rigor mortis and their role in seafood quality, intrinsic and extrinsic factors affecting seafood quality and sensory quality assessment methods.

1.1. Importance of Seafood

Seafood has been traditionally a part of diet in many parts of the world. In some countries like India, it constitutes the main supply of animal protein among coastal population. Seafood is a low-calorie food and easily digestible compared to other protein-rich meat and poultry products and hence, it is a good choice for elderly persons to obtain their daily protein requirements. Seafood has high-quality quality enriched with all the essential amino acids required for human health. It provides about 1/3rd of the average recommended daily allowance (RDA) of protein.

1. INTRODUCTION

Quality, i.e. the degree of excellence or superiority, is a combination of attributes, properties, or characteristics that each commodity value in of human food. The relative importance of each quality component depends upon the commodity and its intended use (e.g. fresh or processed) and varies among producers, handlers, and consumers. Appearance of quality, firmness and shelf-life are important from the point of view of wholesale and retail marketers. Consumers judge quality of fresh fruits and vegetables on the basis of appearance and firmness, flavour (eating) quality of the product. Consumers are also concerned about the nutritional quality and safety of fresh fruit and vegetables.

Abstract

Determination of quality of wheat is very important because quality requirement of an individual product vary from one another. Flour quality can be defined as the ability of the flour to produce a uniformly good end product. Flour quality factors can be divided into two basic groups: those that are inherent in the wheat as a result of the genetic make up and the changes brought about by growing conditions; secondly those factors that might be altered during the process of converting wheat into flour Wheat flour constituents play an important role in determining the quality of flour. The flour quality for baking could be assessed by measuring the physical, chemical and rheological characteristics.

Wheat (Triticum aestivum L.) is one of the major cereal consumed globally in various form as food. The powder of wheat flour is prepared by grinding of wheat seeds. Soft wheat flour has low gluten content that causes its crumbly texture. However, hard wheat flour has high gluten content of about 12-14% and has elastic toughness due to which it has good shape once its baked. Wheat flour is a basic ingredient in India’s famous flatbreads, and it can also be a key ingredient in addressing major health concerns in India.

Fruits and vegetables are very important food commodities not only in developing country like India but all over the world. India, which is the most densely populated country in Asia continent, is still struggling to achieve self-sufficiency to feed about 135 crores people. For this purpose, fruits and vegetables have got their specific importance to provide a balance and healthy diet to the Indian people. Therefore, the reduction of post-harvest loss of fruit and vegetables is a complementary means for increasing production. It may not be necessary to considerably step up the production of fruits and vegetables with the growing demand if the post-harvest loss is reduced to a great extent. The cost of preventing losses after harvest in general is less than preventing a similar additional amount of fruit and vegetable crop of the same quality

Fruits are important source of Pro-vitamin A and vitamin C. In addition, vegetables also supply fair amount of carbohydrates, protein and energy and add colour, flavour and aroma to human diet. India is one of the largest producers of fruits and vegetables. Fruits and vegetables are an important supplement to the human balanced diet as they provide the essential minerals, vitamins and dietary fibre (roughage) for maintaining the tear and wear of the over body. Fresh fruit and vegetables have a short shelf life under ambient conditions of temperature and humidity due to their highly perishable nature. They soon lose their freshness and become subjected to mould and bacterial attack, and consequently decay and become useless as articles of human diet. Fresh fruits and vegetables are valued for their quick sources of available energy. Fresh fruits have high water content (70-96%), varying amount of carbohydrate (3-27%) and fibre (0.2-3.1%) and a low content of protein, fat and minerals. Ideal climatic conditions ensure round the year availability of broad range of fruit and vegetables in large quantities. The production of fruits and vegetables was 97.00 MT and 179.60 MT during the 2017-2018 in India

Maturity Standards and Harvesting Indices

Harvesting : Harvesting is detaching a commodity from the point of its origin. This point of origin may be an above ground plant part i.e. shoot eg. apple, tomato etc. or an underground plant part eg potato, carrot, etc. or in water i.e. harvesting of fish from a pond (not to be covered in this book).

Abstract

India has become not only self sufficient in food grains but has also emerged as net exporter of wheat and rice. Acute famines in India have practically been eliminated, thanks to increased food availability at the national level, improved early warning systems and expanding infrastructure for more rapid transport of food grains and other products to needy areas. However, the existing post management system, strategies and policies don’t seem to match new challenges. Despite government intervention in pricing and procurement of food grains, primarily wheat and paddy, India continues to suffer heavily on account of losses and wastages incurred during the post harvest stages, which are more manmade than natural. Some losses have already occurred before the arrival of food grains in the regulated and wholesale markets and continue till food grains reach their destination. What contribute to continuing losses and wastages are improper post harvest handling, government policies and their implementation, which even stifle growth and modernisation of grain markets and processors.

Introduction

Food grains have been the key component of the human diet for thousands of years and have played a vital role in framing human civilization. Rice, wheat, and maize, and to a lesser extent, coarse grains are major staples, crucial to the daily endurance of billions of people around the world. Cereal grains are consumed by more than 50% of world population to meet daily calorie requirements. Most grains undergo a milling process that ideally removes the outer bran (pericarp) and germ layers; catering to consumer market requirements. To a farmer, yield is the most prominent aspect. As the grain moves along the supply chain, and as the product reaches the market, quality becomes the key determinant of its sale-ability and economic value. Grain quality is defined by a range of physical and compositional properties where threshold necessities are set according to end consumer use requirements. Most industries and consumer markets have become habituated over the years to demand grain with specific attributes. Where consumers are close to the source of grain production (e.g. in local markets), their own preferences and the laws of supply and demand control the grain quality. However, where grain is traded over large distances, particularly internationally, consumers almost have no direct influence on quality, requiring regulatory standards to be established and imposed to protect consumer rights. Therefore in the grain supply chain, all points have effects with respect to grain quality.

Quality is an increasingly important factor in the production and marketing of biological products. Consumers are becoming more discerning as their affluence increases, and would be suppliers of products must meet these demands if they are to maintain or increase market share. The term ‘quality’ is one of the most defined terms in use in food industry today. Quality may be defined as ‘The totality of features and characteristics of a product that bear on its ability to satisfy a given need’. The first part, ‘The totality of features and characteristics of a product…..’ concerns objective factors related to the product.  The second part, ‘…… to satisfy a given need’, concerns subjective factors related to user or consumer of goods.

1. Introduction
Quality makes the product what it is. Quality is how well a product or service satisfies the needs of the customer. Quality can be interpreted in several ways, such as conformance to the standards, meeting customers’ preference/ satisfaction for desired quality attributes, degree of excellence, zero-defect products, etc.
The quality standard of fresh and processed fruit or vegetable products varies with their intended use. For marketing purposes, size, attractiveness, maturity, organoleptic quality and freedom from defects are to be kept in mind in fresh and processed fruit or vegetable products. During the processing of fruit or vegetables into value-added products, colour, flavour and texture also become important. Therefore, Quality is defined in different ways, such as:
i. Quality is a measure of the degree of excellence or degree of acceptability by the consumer.
ii. Quality is also defined as the combination of attributes or characteristics of the products that have significance in determining the degree of acceptability of the product to a user.

Food is a major determinant of health, nutritional status and productivity of the population. It is, therefore, essential that the food we consume is wholesome and safe. Unsafe food can lead to a large number of food-borne diseases. It is necessary that the food available is safe, hygienic, wholesome and its quality must be assured. Quality of foods can be defined as the ‘composite’ of those ‘characteristics’ that differentiate individuals units of a product and have significance in determining the degree of acceptability of that unit by the buyer. In general, the quality control is the maintenance of quality at levels and tolerance acceptable to the buyer, minimizing the cost for the vender. But, from the scientific angle the overall quality refer to technical, physical, chemical, microbiological, nutritional and sensory parameters to achieve the wholesome food. These quality factors depend on the specific attributes such as sensory properties, based on flavour, colour, aroma, taste, texture, quantitative properties viz. percentage of sugar, protein, fibre etc and hidden attributes like peroxide, free fatty acids, enzymes etc. Though quality attributes are many, not all need to be considered for a particular product. It is imported to determine how far relatively the factor is in relation to the total quality of the product.

Hence, the quality attributes of a particular is based on the composition of the product, expected deteriorate reaction, packaging used, shelf required and the type of the consumer i.e., deployed in terrain conditions or in peaceful situation. With the ultimate goal of protecting the consumer, quality standardization systems have come into force for regulating the gamut of operations in food manufacture. In a broader sense, food laws and Regulation cover the related acts affecting the marketing, production, labeling, food additives used, dietary supplements, enforcement of General Manufacturing Practice (GMP), Hazard analysis and critical Control Point (HACCP), federal laws and regulations, factory inspections and important-export inspections.

Introduction The onion (Allium cepa) is one of the world's oldest cultivated crops, with a history dating back over 5,000 years (Gorrepati et al., 2014). At present, India is one of the world's largest producers and exporters of onions. At the time, India ranked second in onion production with a yearly production of around 23262 TMT and an average yield of 18.10 MT/ha (Prajapati and Saini, 2019; Horticulture Statistics at a Glance, 2018; Tripathi and Lawande, 2016). Maharashtra, Madhya Pradesh, Karnataka, Gujarat, Rajasthan, Bihar, Andhra Pradesh, Haryana, West Bengal, Uttar Pradesh, Chhattisgarh, Odisha, Tamil Nadu, Jharkhand and Telangana are the major onion producing states in India. Maharashtra alone covers 55-60% of countries total production. Solapur, Satara, Dhule, Jalgoan, Osmanabad, Beed, Latur, Aurangabad are the major onion producing districts in Maharashtra (Tripathi et al., 2005). Unfortunately, India witnessed around 40-50% post-harvest losses of onions every year (Prajapati and Saini, 2019).

Abstract

Fertilizer inputs are increasing the cost of production in inputintensive crops, so nutrient efficientcultivar is need oftoday. More demands for food by increasing world populations further enhance the importance of nutrient efficient crop cultivars that are higher producers. Breedingtechniques havebeenimplemented significantlyto breed highnutrientefficient crop cultivars to achieve the targets. However, molecular mechanism of nutrient metabolism has been understood to some extent in many crops through quantitative genetic approaches. This minireview outlines an update on recent progress on the genetic approaches of QTL/candidate genes controlling nutrient metabolism pathways in the crop plants.

‘Prunes’ is prepared from peach.

Arrak” liquor is prepared from date palm.

Hayane” variety of date palm suitable for juice making.

Kanji” is made from black carrot.

Kirschwascer” a wine prepared from cherry.

Shahi” variety of Litchi suitable for canning.

Quinoa (Chenopodium quinoa Willd.) is a part of “Chenopodiaceae” family. Up to 250 species of Chenopodium have been identified to date. Quinoa is a South American grain that has been farmed in the Andes for thousands of years, particularly in Peru and Bolivia. It is considered as a sacred plant because of its abundance in protein and essential amino acids (Jancurova et al., 2009). Quinoa is distinguished by its excellent adaptability to a diverse variety of land and environmental variables. Both leaves as well as the grains are considered as the edible parts. However, the quinoa grains have been extensively studied and economically explored (Rocha, 2008).

R - Enamel can: The acid resistant, gold coloured enamel treated can are called R enamel cans. It is used for canning of acidic food which have soluble colouring pigments.

R value: R value is a measure of resistance to the flow of heat through a given thickness of a material (insulation) with higher numbers indicating better insulating properties. R-Value is a measure of insulation’s ability to resist heat traveling through it. The higher the R-Value the better the thermal performance of the insulation.

Rabbitto and putridity: The surface taint of the milk caused by Pseudomonas putrefaciens is called rabbitto and putridity.

Racking: An important operation for the wine production in which wine is siphoned off and is transferred to a fresh vat with the help of a false bottom. Racking is repeated decanting to remove the slowly setting cloud of the freshly fermented young wine. It is also called clarification. It is synonym to siphoning.

1. Introduction

Food is processed for its preservation, hygienization or value addition. To date, the food preservation technologies such as canning, dehydration, freezing, pasteurization and controlled atmosphere and modified atmosphere packaging have been the main processes employed to preserve foods, with the use of antimicrobials and microwaves also being employed more recently. In future, however, technologies such as exposure to ionizing radiation, high pressure processing, ohmic heating and pulsed electric field processing, could potentially be the new alternatives to the above food preservation technologies.

Irradiation of food involves the exposing of food, either in prepacked form or as such to controlled doses of ionizing radiation being generated either by electrically driven machines such as electron beam accelerators, x-rays or gamma rays produced by radioactive isotopes such as CS-137,CO-60, to achieve certain desirable objectives. The process of exposing a range of food stuffs to specific doses of ionizing radiation is being used to extend the shelf life of food stuffs, to improve their overall safety and quality by eliminating pathogenic bacteria, by reducing number of food spoilage organisms, to reduce the bacterial load on herbs and spices and thereby making them safe to incorporate into food stuffs, to inhibit sprouting in stored tuber and bulb crops such as potatoes, onions and garlic, to disinfest grains, grain products and tropical fruits to prevent damage to the commodity and to meet the quarantine regulations(Arun Sharma, 2004, Farkas, 2006).

Need to Preserve Food

Food is vital for human existence. Conservation and preservation of food is a prerequisite for food security and it provides economic stability and self reliance to a nation. The need to preserve food has been felt by mankind since time immemorial. The seasonal nature of production, long distances between production and consumption centers and rising gap between demand and supply have made this need even more relevant today. The hot and humid climate of a country like India is quite favorable for the growth of numerous insects and microorganisms that destroy stored crops and cause spoilage of food every year. Spoilage can also occur due to chemical and physiological changes in stored foods. Sea-foods, meat and poultry may carry harmful microbes and parasitic organisms that cause illnesses associated with their consumption. As in other parts of the world, India has also practiced various methods of food preservation such as sun drying, pickling and fermentation which were supplemented with more energy consuming techniques such as refrigeration, freezing and canning. Each of these methods has its merits and limitations. Man has always been on the search for newer methods to preserve foods with least change in sensory qualities. Radiation processing of food is one of the latest methods developed for this purpose.

1. Introduction The chapter aims to bring out the potential benefits of radiation processing technology for value-addition of millets. How the radiation processing technology can be exploited for making millets as a popular staple food would be the central theme. The key focus is to establish if irradiation (the term generally used for radiation processing of any material) can be employed for making millets for different purposes relevant to farmers and consumers. In order to understand and prove, we would list out the challenges involved in developing the market for millets. The key points that need to be considered for this go-to-market strategy for millets are : a) Millet grains have a long shelf-life, much better than the popular grains e.g., rice and wheat, consumed worldwide, but millet flour shelf life is significantly much shorter.

The rambutan is native to Malaysia and commonly cultivated throughout the archipelago and southeast Asia. Though a close relative of the lychee and an equally desirable fruit, this member of the Sapindaceae is not nearly as well-known. Botanically, it is Nephelium lappaceum L. (syns. Euphoria nephelium DC.; Dimocarpus crinita Lour.). In the vernacular, it is generally called rambutan (in French, ramboutan or ramboutanier; in Dutch, ramboetan); occasionally in India, ramboostan.

1. Introduction

Foods are complex biologically and chemically active systems that require close monitoring of their manufacturing, distribution and storage conditions in order to maintain their nutritive value, safety and sensory qualities by suitable chemical. The determination of trace impurities in food system presents considerable difficulties owing to complexity as it contains thousands of major and minor compounds (Nilufer and Boyacio, 2002). The choice of the method of analysis depends on the sample, the analyte to be assayed, accuracy, limit of detection, cost and time to complete the analysis (Aboul- Eneim et al., 2000). The chemical methods employed for food analysis and quality control are generally time consuming and require tedious or destructive sample preparation. For development of the new detection method, emphasis should be on development of simplified, cost-effective and efficient procedures that complies with the legislative requirements (Stroka and Anklem, 2002; Enker, 2003).

The molecular spectroscopy is a fast, accurate, easy and non-destructive technique that can be used as a replacement of time-consuming methods. Near infrared (NIR) spectroscopy has proved to be a powerful analytical tool used in the agricultural, nutritional, petrochemical, textile and pharmaceutical industries (McGlone and others, 2002; Esteban-Diez and others, 2004). Infra red spectroscopy is based on the absorption of infra red light by the substance to be measured. This absorption excites molecular vibrations and rotations, which have frequencies that are the same as those in the infrared range of the electromagnetic spectrum (Pande and Mishra, 2015). This application uses a fiber optic coupled FT-NIR system operating in the 10,000 – 4,000 cm^-1 region in reflectance mode. It involves the analysis and quantification of molecular responses to introduced signals of known energy or frequency. All molecules (e.g. water, glucose, protein) have a definite amount of energy. When alternate energy (e.g. infrared radiation) is introduced, an energy exchange occurs between the introduced energy and the energy contained within the molecule. This is expressed as absorbance (energy is absorbed resulting in a loss of introduced energy), attenuated (energy is scattered resulting in a loss of introduced energy) or emitted (energy is released resulting in a gain on the introduced energy). As individual molecules and molecular groups (e.g. alcohols, nucleic acids, proteins, sugars and fats) have definite energy, by applying external energy of a known amount/type, one can structurally identify, quantify and even determine the natural state of these molecules within complex samples and mixtures.

1. Introduction

There is a general consensus that fruit and vegetable consumption is a key factor for a balanced diet. Globally, majority of people consistently are consuming less than the daily recommended fruit and vegetable requirement. Even in developed nations e.g., Australia, Canada, Europe, UK and USA, researchers have concluded that there is large gap between actual and recommended consumption of both fruits and vegetables despite decades of concern and publicity while resultant outcomes were short-lived. In a study from 52 low and middle-income countries 77.6% of men and 78.4% of women consumed less than the minimum recommended servings of fruits and vegetables. Same study reported 74% low fruit and vegetable consumption among adults in India (Hall et al., 2009). In India, recent studies on the fruit and vegetable intake amongst urban residents was reported as 265 g per day as against 400 g per dayof fruits and vegetables excluding potatoes and other starchy tubers, that is recommended by the World Health Organization (WHO, 2008).

Epidemiological studies conducted in recent years have indicated a positive correlation between the consumption of fruits and vegetables and prevention of cancer and cardiovascular diseases. Health-promoting functional characteristics of vegetables are mainly attributable to their functional bioactive constituents. These effects can be listed as antioxidant activity, cholesterol-bindingcapacity, antidiabetic activity and angiotensin-converting enzyme (ACE) inhibitory activity. Studies conducted in cell culture models and animal models have revealed that bioactive compounds of plant foods, including soybean, hawthorn fruit, tea, buckwheat, oats, onion, garlic, almond, and vegetable juice, composed of tomato watercress, parsley, carrots, celery, lettuce, beets and spinach, have cholesterol-lowering activity (El-Shatanovi et al., 2012; Vadivel et al., 2011).

1. Introduction

Extrusion is one of the most preferred ways for creating the indulgence called ready-to-eat (RTE) snack foods with diverse shapes, sizes, colours and also nutritional and functional values which appeal to the diverse group of consumer with varied choices. In this chapter ready-to-eat extruded and puffed snacks are the focus covering the technology involved, criteria for ingredient selection, design of experiment, process modelling, effects of extrusion on physical, nutritional and functional quality of the snack; a few relevant case studies are also discussed.

1.1 Market for RTE snack foods

Indian cooking and lifestyle have undergone tremendous changes in the last 15 years. There are many major factors impacting this change which include, liberalization policy, dual income, separate living of couples, innovative kitchen applications, media proliferation, etc. The cooking style and eating habits in India varies drastically from southern part to northern part of the contry. Due to lifestyle pressure nowadays people prefer easy short way of cooking food rather spending too much time on cooking. Rapid urbanisation is also one of the reasons for people to buy such products. Snack foods comprise a very large variety of items including potato chips, crackers, nuts and extruded snacks, among others (Harper, 1981). Snack food extrusion includes subjecting selected raw material to a variety of complex physical processes to yield snacks with varied shapes and textures (White, 1994).

The RTE market in India was expected to expand to reach Rs. 2,900 crore by 2015, according to an analysis done by Tata Strategic Management Group (TSMG). The products may vary from noodles, pasta, masala packages, stuffed paratha, etc. and many more. There are many regional players who are making foray into ready-to-eat segment. Many national and international players like Nestle, Pepsico, ITC, Haldirams, Cavinkare, are already in Indian market with their products.

1. Introduction

1.1 Malnutrition

The term malnutrition generally refers both to under nutrition and over nutrition, but in this guide we use the term to refer solely to a deficiency of nutrition. Many factors can cause malnutrition, most of which relate to poor diet or severe and repeated infections, particularly in underprivileged populations. Inadequate diet and disease, in turn, are closely linked to the general standard of living, the environmental conditions, and whether a population is able to meet its basic needs such as food, housing and health care. Malnutrition is thus a health outcome as well as a risk factor for disease and exacerbated malnutrition, and it can increase the risk both of morbidity and mortality (Ogunrinade, 2014). A term used to refer to any condition in which the body does not receive enough nutrients for proper function. A person cannot properly digest or absorb nutrients from the food they consume, as may occur with certain medical conditions (Medicine, 2015). Malnutrition may range from mild to severe and life-threatening. It can be a result of starvation, in which a person has an inadequate intake of calories, or it may be related to a deficiency of one particular nutrient (for example, vitamin C deficiency).

Malnutrition is estimated to contribute to more than one third of all child deaths, although it is rarely listed as the direct cause. Lack of access to highly nutritious foods, especially in the present context of rising food prices, is a common cause of malnutrition. Poor feeding practices, such as inadequate breast feeding, offering the wrong foods, and not ensuring that the child gets enough nutritious food, contributes to malnutrition (WHO, 2015).

Pooled estimates report the prevalence of malnutrition among community-dwelling older adults of 6% and among hospitalized older adults of 39%. In developed countries, treatment of malnutrition is relatively inexpensive and effective: energy and protein supplementation using commercial “sip feeds” results in both weight gain and reduced mortality (Pereira et al., 2015). In 2013, one in four children under age five worldwide had stunted growth. Between 2000 and 2013, stunting prevalence globally declined from 33 to 25 %, and the number of children affected fell from 199 million to 161 million. In 2013, about half of all stunted children lived in Asia and over one third in Africa (UNICEF, 2015). Malnutrition may be several types as follows:

Previous Year Questions

1. Discuss the reasons for food grain surplus (7.5 marks, CSE 2019)

2. What are the reasons for good grain surplus in India? Write the steps taken by the government to save the food grains. (12.5M, CSE 2015)

Reason for Grain Surplus

Green Revolution

• Introduction of high yielding varieties of Rice and Wheat

• Green Revolution was made possible through the use of

Abstract

Potato in India was introduced as a long day temperate crop which found suitable climate in the higher hills of the country. Since then it is grown widely in the Indo-Gangetic Plains, the Plateau and the Himalayan regions in north and the Nilgiris hills in south of India. The Central Potato Research Institute (CPRI), Shimla has developed 49 potato varieties by the conventional breeding for suitable cultivation of potato in different potato zones of India. A number of technologies for ware- and quality seed- potato production, storage and processing have been developed/standardized for adoption by the end users. These technologies have contributed immensely towards multiple increase in area, production and productivity of potato during last sixty years. Apart from conventional tools, modern biotechnological tools like whole genome sequencing technology, transgenics technology, molecular markers, RNAi and microarray technology have are also being employed in potato improvement.

Advancements on sugar processing

India has popped out as one of the largest sugar processing country throughout the world. Through the collaboration of research and development carried out in the field of sugar processing, this industry has witnessed the vast changes in term of technology. Important considerations such as productivity improvement and cost reduction were the main objectives in the field of sugar processing. Sulphur dioxide was earlier used but afterwards lime treatment in clarified juice helped in the processing of white sugar from sugar cane. Since then the continuous progress and improvement has been made and advanced techniques are introduced for manufacturing of sugar with modern tools.

Ramjeawon (2004) reported that farmers and agriculture workers grow sugar cane and beet root for sugar production,providing about 20 kg per capita and that is equivalent to almost 13 percent energy requirement. Fechter et al. (2001) reported that production of the white sugar was focused more on juices rather than molasses which were taken as the raw material. Various processes such as ultra-filtration, de-mineralization and de-colorization were used for the production of white sugar. The traditional refining process wascheaper, and effective in terms of purification and juice purification was the method used for the processing of white sugar directly from the sugar cane. Crystallization was one of the process which is used for increasing the recovery of sucrose and it reduces the molasses production. Chromatography was used in the sugar industry for the separation of sucrose. Another method was ion exchange demineralization which was used in the sugar industry for the removal of minerals from the liquid sugar. Later adsorption has been incorporated to be used de-odorization and de-pigmentation. Membrane filtration is latest technique used in the process which was used for maintaining the quality of white sugar by removing unwanted particle from the juice. Velásquez et al.,(2018) reported that thermal processes are also used for the production of sugar from sugar cane. Non centrifugal cane sugar processing is used for this purpose and the product is obtained by evaporating the sugarcane which has the unique flavor and aroma. Later the product is used as the sweetener and has a traditional characteristics flavor and optimum nutrition.

1. INTRODUCTION

Preservation of foods by drying is perhaps the oldest method known to mankind. Drying is a thermo-physical action and its principles are governed by heat and mass transfer laws inside and outside the product. The weight of the product is reduced to the extent of 1/4^th to 1/9^th of its original fresh weight. Drying of foods and biological products is a widely applied process for different purposes such as increasing the shelf-life, reducing packaging costs, lowering shipping wastes, encapsulating flavours, making food available during off-season, adding value by changing the phase structure of the native material and maintaining nutritional value. Drying or dehydration of fruits and vegetables can be accomplished with low capital while maintaining high quality and obtaining less perishable food products.

Abstract

Packaging plays an important role in the food processing Industry. It makes food more convenient as well as gives the food greater safety assurance from microorganisms, biological and chemical changes such that the packed foods can have longer shelf life. In order to meet the huge demand of processed food with longer shelf life, various methods of preservation and packaging are being used in the food processing industry. Drying and dehydration is one of the method which helps preservation of a perishable commodity against deterioration or spoilage.

The pineapple, botanically known as Ananas comosus Merr, is the most famous edible member of the Bromeliaceae family. It is native to southern Brazil and is known by a variety of names, including “pina” in Spanish, “abacaxi” in Portuguese, “ananas” in Dutch and French, “nanas” in Southern Asia and the East Indies, “po-lo-mah” in China, “sweet pine” in Jamaica, and merely “pine” in Guatemala (Morton, 1987). After banana and mango, the pineapple is the third most important tropical fruit of the world (Chen et al., 2019; Nath et al., 2019). The pineapple became a major cultural icon of luxury after its introduction to Europe in 17th century. Pineapple has been grown commercially in greenhouses and on many tropical plantations since the 1820s. Furthermore, it is the world’s third-largest tropical fruit producer. Hawaii was a major pineapple producer in the twentieth century, with Costa Rica, Brazil, and the Philippines accounting for nearly a third of global pineapple production. Pineapples grow as a small shrub, with the un-pollinated plant’s individual f lowers fusing to form multiple fruits. The plant is usually propagated from a side shoot or an offset produced at the top of the fruit and it matures in about a year.

Crop Improvement

Pineapple is usually propagated through asexual method by using slips, crowns or suckers. Sexual reproduction in pineapple is barely used due to its self-sterile nature and failure in formation of seeds. Seed set can occur in case of self-fertilization but the seedlings are with low vigour due to inbreeding depression (Robert et al., 2003). Pineapple is heterozygous in nature, on this wise hybridization is possible in this crop. Gametophytic self incompatibility is reported in this crop where pollen tube growth is repressed in the uppermost part of the style. Diploid chromosome number of the crop is 2n=50. The genome size of the crop is estimated to be 526Mb and total genes were anticipated to be around 25,862 in number (Zhang et al., 2014).

Abstract

Food lost during the production chain is referred to as postharvest loss. Reducing postharvest loss can effectively feed starving mouths while conserving resources and decreasing the pressure to produce more. There are five main areas where postharvest loss can be reduced – harvest, storage, transportation, processing, and retail. New approaches and technologies in each of these areas will increase the amount of food available for human consumption. The total loss due to poor post- harvest processing of agricultural products in India when valued in terms of monetary reflects a tremendous loss in the economy. Annual value of harvest and post-harvest losses of major agricultural produces at national level to be of the order of Rs. 92,651 Crore calculated using production data of 2012-13 at 2014 wholesale prices. Deficits in food items or financial loss should not have occurred if postharvest losses were reduced through proper processing and preservation from harvest to consumption. Both the government and private sector need to invest in research so as to improve and modernize post-harvest facilities for attaining more efficient market infrastructure and distribution channels. Research and extension activities have to be closely coordinated particularly in the public sector for the benefit of farmers, traders and consumers.

A number of innovations have taken place towards ready to eat instant food mixes of traditional origin. These have helped people to eat traditional food in which ever part of the world they go.

MTR Company

In India the best example is of MTR company which manufactures a range of packaged foods which includes breakfast mixes, ready to eat meals, masalas and spices, snacks and beverages. Snacks, such as kodubale, khara boondi and masala groundnut are very popular as they are ready to eat packets and contain healthy food with less oil. The different spices used for mixes are procured from famous countries which give the perfect taste and avoid rancidity.As a summer launch, milkshake with canned chikoo, banana and cold filter coffee are available. MTR Foods Pvt. Ltd. is a subsidiary of Norwegian conglomerate Orkla and is an acronym of Mavalli Tiffin Rooms. According to the company, India is on the verge of explosive growth in packaged instant foods. MTR has an aim to target a market of Rs 30, 000 crore with their products of traditional meals, breakfast, snacks and desserts. The Nielsen India study has shown that in 2020, the number of consumers in this category will be 2.7 times than the current base.

Mother’s Recipe is a brand which make traditional pickles in bottles with a distribution network to 20 states in India and exporting the products globally. The manufacturing is done in-house and the raw materials are procured seasonally in large quantities. After cleaning they are cut according to the recipe. Each variety of mango pickle has its own cutting process. Some are automatically cut, while others need manual work. The use of right oils, spices roasted inhouse, and marination of the pickles according to the practices of the particular region allow many consumers to relish them. Bottling and packaging are done only when the orders come.

Abstract

Medicinal herbs are economically and nutritionally important plants, which are rich in health-promoting compounds. Herbs are the backbone of both the traditional Chinese and Indian medicine, which has long history as part of their culture. Ensuring the quality of herbs is a crucial step for integrating the traditional medicine into science-based modern medicine. Drying is an essential technique in preservation of herbs as it affects directly the quality attributes of the dried products, whereas many producers lose much profit due to poor drying techniques. So, employing a suitable drying technology and selection of appropriate drying conditions are very important for producing high quality herb products. The aim of this article is to summarize the advances in drying technologies of medicinal plants, describe the current status and identify future research opportunities. The current work provides more data and information for selecting optimum technology for herb drying and would trigger innovative drying technologies to enhance drying kinetics and quality of herb drying.

Netting yarns for the fabrication of fishing gear are either of textile or non-textile origin. Textile materials compose of netting, twine and rope while non-textile origin materials constitute floats, sinkers, hooks etc. Raw material for fish netting consists of fibres which can be distinguished into two groups: natural fibres and man-made fibres. Different kinds of fibres originating from plant and animal body parts have been used for production of textiles and other products and are termed as natural fibres. Natural fibres such as cotton, manila, sisal, jute and coir were the materials exclusively used in earlier days for fishing gear fabrication.

Later, the invention of polymers resulted in synthetic fibres the use of which revolutionalized the fishing industry. In recent decades advances have taken place in fiber technology, along with the introduction of other modern materials. With the introduction of man-made synthetic fibers in India in the late 1950s, natural fibers used for the fishing gears have been substituted by these synthetic materials due to their high breaking strength, low maintenance cost, long service life and better uniformity in characteristics. Most important synthetic fibres used in fisheries are polyamide (PA), polyester (PES), polyethylene (PE) and polypropylene (PP). Other synthetic fibres, which are less widely used and generally restricted to Japanese fisheries, are polyvinyl alcohol (PVA), polyvinyl chloride (PVC) and polyvinylidene chloride (PVD). Earlier, netting used to be fabricated manually, which is laborious and time consuming while the introduction of synthetic fibres paved way for machine made nettings which are almost exclusively used in fishing net fabrication.

Introduction

The improvement of the quality of foods can be made by fortification of foods nutrients quality and quantity in food. It can be a very cost effective public health intervention. As a result of the high consumption pattern of dairy products viz. yogurt, the fortification process will effectively diminish or prevent diseases associated with nutritional deficiencies (Gahruie et al., 2015). However, due to nutrients deficiencies in human population especially in certain stages of life, holding, importing, and consumption of fortified foods is increasing (Preedy et al., 2013). As a general rule, addition of one or more essential nutrients to a food and increasing their concentration in that particular food to levels higher than normal is known as fortification. This is intended at preventing and correcting shortages in one or more micronutrients in the society or specific population groups (Bonner et al., 1999). The major ways of food fortification are (1) commercial and industrial fortification for wheat flour, corn meal, cooking oils, (2) bio-fortification of crops to augment their nutritional value, which can include conventional as well as selective breeding, and genetic engineering and (3) house hold fortification like vitamin D drops. Fermentation has twofold outcome on glycemic index though there are conflicting results after consumption. The reduced glycemic index of fermented food has been featured to the production of short?chain organic acids during fermentation.

Introduction

For human beings, the three most important necessities for their survival are food, clothing and shelter. among all of these food is the top most priority. Food safety and Standards defines food into 8 categories (Nutraceutical, Heath Supplements/Dietary Supplements, Food for special medical Purpose, food for Special Dietary Use, Novel Food, and Functional food) in regulation, 2016. A growing trend of health products, concept of food as medicine, associated public interest and consumers demand leads to a progressive research interest in functional foods and nutraceuticals development. Abnormal lifestyle, food habits (consumption of junk food) and low physical activity creates an exponential growth in a number of chronic diseases; obesity, cardio-vascular syndromes, osteoporosis, arthritis and cancer (Das et al., 2012) among the developing and developed countries. While nutraceuticals and functional foods are becoming an alternative affordable system to reduce the risk of disease through prevention in spite of high tech therapies and costly medicines.

The current survey showed that worldwide revenue of functional foods is projected to increase from about 300 billion U.S. dollars in 2017 to over 440 billion dollars in 2022. Also according to the International Food Information Council (IFIC), health benefits achieved from functional food components may provide benefits far beyond than basic nutrition. Products like dietary supplements containing vitamins, functional foods such as sports drinks or products fortified with probiotic play a major role in the market rise (www.statista.com).Indian and Chinese traditional foods, recipes, spices and diversified ingredient market is well known around the world from centuries. Hence, a double-digit growth rate is also experienced in Asian nutraceutical and functional food market. Another reason for the growing trend in consuming functional foods is education and proper health awareness. Furthermore, people are more concern about the optimization of health-promoting capabilities in their diet using dietary supplement and fortified foods. While, food product based industries are marketing health supplements using scientific facts and the relationship between diet and health. Government, non-government organizations (NGOs) and web-based online information also play a key role in promoting and trending food based health products.

Preamble

Historically, food has been an integral part of human civilization and diet with varied food components has sustained human life on this planet over the centuries. Similarly, culturing of food with natural fermentation as means of preserving foods with extended shelf life for future use. In the background of sustaining food security, advances made in biotechnology and molecular biology has provided ample scientific platform to use the advances in increasing and expanding food production on a global magnitude, so as to meet the needs of an ever-growing world population.

The intestinal microbiota is a key component of both the metabolism and immunity of humans and animals. The desirable microbes do have a significant role to play in healthcare through control of digestive disorders and foodborne illnesses. The continued research in this area over the years has led to the identification of important molecules that regulate major functional attributes in the betterment of human health and wellness in the long run. The science and technique of genetic engineering through molecular biology approaches has enabled in enriching the beneficial molecules for the benefit of human life. The accuracy in targeting and designing of molecules will go a long way in developing genetically modified (GM) lactic acid bacteria (LAB) and GM probiotics to significantly rewrite the medical care with food-based approach in the form of targeted specific diets – “Dietomics”.

1. INTRODUCTION

When the fruits and vegetables are ready for the intended purpose, these have to be harvested. What is meant by harvesting and how the produce is harvested, what are the harvesting methods, how these are packaged in what type of packages have been discussed in this chapter.

2. HARVESTING

Harvesting of produce at proper maturity is of paramount importance for maintaining quality during storage and marketing. When the produce is harvested immature or over-mature, it will affect the quality and storage life adversely. After the proper maturity stage has reached, the produce needs to be harvested for various markets. While harvesting, it must however, be kept in mind that all horticultural produce (with the exception of some dry fruits/nuts) is very delicate and mishandling at harvesting may lead to mechanical injury, compression injury that is irretrievable. The injury on fruits/vegetables enhances ethylene production, moisture loss and serves as an entry point for a wide range of pathogens, hence causing quick loss in quality and storability of produce. The injury caused to the produce during harvesting not only spoils the commodity but also makes it unfit for long-term storage or long-distance transportation. Proper training to the labour engaged in harvesting on what to harvest, and how to harvest and the use of proper harvesting tools can reduce considerably the postharvest losses.

Introduction

Cereals and cereal products comprise a long history of consumption by humans. Cereals are the important source of nutrients and non nutritive health beneficial components and for that reason cereal based food products are consumed as staple food in human diet in developed as well as developing countries. The cereal grains mainly cultivated and consumed as food include rice, maize, wheat, sorghum rye, barley, oats, and millet. Products obtained from cereal grains are flours, grits, semolina, breakfast cereals, extruded product like pasta, puffs and flakes, and bakery products such as bread, biscuits, cakes and tortillas. Moreover, cereals or their components are used as ingredients in the preparation of various food products such as beverages infant foods coatings and processed meats. Initially cereals are consumed as whole or with minimal processing like boiling, grinding and roasting. However, processing like salting, drying, steeping and fermentation of cereals for preparation of cereals based beverages and foods has been practiced since the initiation of cereals consumption as food by human. Increasing consumer awareness and commercialization of cereal products have created interest of food manufacturers in utilization of novel and more efficient technologies with optimized conditions, development of convenient and more health beneficial foods with satisfactory sensory properties and wide variety of foods to ease the choice of consumers. Market full of diverse range of snack foods, breakfast cereals, ready to eat and ready to cook foods, and novel functional foods with variation in appearance, texture and flavor is an indication of evolution of food industry from basic to complicated form focused on efficient and automated operations. In ancient times, fermentation of food was done with the aim of enhancement of shelf life and palatability without clearly knowing the role of microorganisms. Modern fermentation technology uses various operations and specific strains of microorganisms for conversion of bulky and perishable materials into novel foods with more pleasing flavour, enhanced functional properties and extended shelf life. In addition to basic bread, new varieties of bread developed with improved functionality like sourdough bread, gluten free breads and high fibre breads is an example of innovation in cereal fermented foods indicating modification in ingredients, microbial culture and processing technologies as compare to traditional fermentation process. The word “extrudate” is derived from the Latin word “ex” meaning ‘out’ and “trudere” meaning ‘to thrust’. Extrusion technology is turning out to be very popular in food industry due to its versatility, usefulness and cost efficiency. It is well-organized state-of-art technology and plays important role in various food industrial processes such as cooking, mixing, conveying, shearing and shaping of end products. Extrusion cooking is high temperature short time (HTST) with high pressure process, is especially used for preparation of cereal based snacks, fat replacers, breakfast cereals, infant formula, gluten free foods, starch and protein rich cereals food products. A wider range of ready to eat food products with different texture, size and shape is produced by fast and easy extrusion cooking. In epidemiological studies it is stated that whole grain consumption is more health beneficial than refined grains and the reason behind it is that dietary fibre and phytochemicals located in germ and seed coat are generally removed during milling or polishing. Various technologies are developed by food scientists and technologists to preserves the bioactive compounds during processing and or to supplement processed food products with the bioactive compounds during food preparation to maintain the bioactivity and functionality of final products. Utilisation of whole grain flours, composite flours, supplementation of cereal foods with ingredients from fruits, vegetables, plant extracts and legumes, bio-fortification of crops, implementation of genetic engineering to produce crops rich in bioactive compounds are some technologies which are being used in modern food industry to develop value added cereal food products.

Introduction
Milk reception at the processing plant is a crucial stage in the dairy supply chain, as it serves as the first point of quality control and the gateway to further processing. The success of milk processing hinges on the careful handling, evaluation, and preparation of the raw milk upon arrival. The stringent protocols at reception ensure that only high-quality raw milk enters the system. By implementing advanced technology, strict hygienic standards, and efficient handling practices, processing plants can maintain milk’s safety and quality, setting the foundation for the production of superior quality dairy products. The intricate procedures at this stage safeguard consumers' trust and ensure compliance with regulatory requirements.
Milk is transported to dairy plants either in cans or in road/rail tankers. The designated area within the dairy plant where milk is first received, inspected, and graded for acceptance is referred to as the milk reception dock, platform, or raw milk receiving dock (RMRD). This reception dock is specifically designed and equipped to ensure the efficient handling of milk, enabling its swift unloading while also accommodating the cleaning and sterilization of used containers.
Since the quality of milk is a critical factor for its subsequent processing, the decision to accept or reject milk must be made promptly upon its arrival, following a thorough evaluation. The milk reception process should be meticulously planned, and the equipment must be selected to ensure efficient intake operations, particularly in facilities handling large milk volumes. Any delay can result in deterioration of milk before unloading, increased labour requirements, and higher operating costs. To avoid such issues, milk deliveries should adhere to a strict schedule, and the reception process should be completed within a stipulated time frame of time. This ensures seamless continuity of the dairy plant operations.

RECRUITMENT 
Recruitment is the process of identifying the prospective employees, stimulating and encouraging them to apply for a particular job or jobs in an organization. It is a positive action as it involves inviting people to apply. The purpose is to have an inventory of eligible persons from amongst whom proper selection of the most suitable person can be made.

The Process of Recruitment
Before thinking of inviting people to apply for a job one has to decide what types of persons are to be invited and what their characteristics should be. This calls for fixing the ‘job specifications’ which may also be called ‘man specifications’. Job specifications are based on job description which is dependent upon the nature and requirements of a job. 

Thus, job specification will be different for each job. The various elements of job specification are:

Introduction

In every industry main running factors are as Manpower, machine, material and money.

Money is main big factor for capital expenses as well as operating expenses. Beside this other driving force are man power who installed and run the any industry based on their skill level.

Every organization has their own organization structure to manage industrial operation based on product variant like market milk, curd, paneer, buttermilk, butter & ghee, ice cream etc. Basic dairy plant organization structure is shown in below table and HR department mainly keep in mind to recruit them based on functional requirement, educational qualification, professional experience etc.

Based on above manpower requirement and product variants, processing cost to be worked out.

Recruitment of Manpower

Manpower is major key component of any industry/organization to run efficiently. The dairy industry, being one of the most vital sectors of the global agricultural economy, relies heavily on a skilled and efficient workforce to sustain its operations. Manpower’s involvement starts from milk production at farm level to processing and marketing of value-added dairy products, every stage to ensure quality, productivity and compliance with industry standards. Recruitment and training of manpower, therefore, play a primary role in addressing the challenges of modern dairy operation, including technological advancements, quality assurance, and sustainability.

14.1. Introduction

There is a tremendous need to change the way society produces, and consumes materials to manage the environmental effect in the growing scarcity of resources. To overcome this issue, recycling process could be a great possibility that reduce the uses of natural resources, maximizethe waste utilization and produce least environmental impact. Unfortunately, packaging materials contribute 40% of solid waste in Western Europe, and 33% in US. In fact, packaging waste is likely to increase in transitioning and developing countries. Recycling process consists of collection, sorting, recovery, and management of packaging materials. As per the report of “Eurostat statistics in 2018”,European Union (EU) generates 174.1 kg of packaging waste per inhabitant, Croatia contributes 67.8 kg per inhabitant and Germany produce 227.5 kg per inhabitant.

Abstract
The growing global population has intensified farming practices, increasing the use of fossil fuels and agrochemicals. With limited land and the need to enhance food production, balancing environmental impact, especially carbon footprints, is crucial. Climate-smart mitigation options, with a prime emphasis on crop diversification, can help agriculture adapt to anomalous weather patterns and build resilience. Legumes offer a sustainable solution by reducing greenhouse gas emissions, as they produce 5-7 times less gases per unit area compared to other crops. They aid in carbon sequestration, with soil carbon estimates of 7.21 g kg-1 of dry matter, and save fossil energy by decreasing nitrogen fertilizer use, reducing CO2 emissions by 277 kg ha-1 per year. Legumes play a key role in low-emission farming systems due to their ability to fix atmospheric nitrogen, reducing dependence on energy-intensive synthetic fertilizers. They improve soil health, enhance soil structure, and support carbon sequestration. Integrating legumes into crop rotations reduces the need for chemical pesticides and fertilizers. Additionally, legumes can be used in food, feed, and biofuels, lowering reliance on more carbon-intensive resources. Embracing legumes in farming systems promotes sustainability improves soil health, and considerably reduces the overall environmentalimpact of agriculture.
Keywords: Carbon Footprint, Greenhouse Gas Emissions, Legumes Sustainability

Abstract

Refractance Window (RW) drying is a relatively new drying technology. This method is carried out by spreading a thin film of food slurry on a conveyor belt made up of a transparent polyester material. The slurry is thermally heated as it moves along the conveyor belt, resulting in rapid drying of the product. RW drying is similar to Drum Drying, but conducted at lower temperatures (95–97^ºC) and without direct contact with the heat source. RW drying offers low operating costs with excellent retention of color, flavor and nutrients.

It is well known that lowering the temperature of food stuffs reduces microbiological and biochemical spoilage and thus extending the shelf life of the product. In addition, it is generally agreed upon that the reaction rate is reduced by half by lowering the temperature by 10°C. Though low temperature preservation process has been recognized as a preservation technique for several hundred years, the major developments in its utilization have occurred only in the last century.

1. Introduction

Refrigeration may be defined as the process of achieving and maintaining a temperature below that of the surroundings. The aim being to cool some product or space to the required temperature. Refrigerated system or a room system is maintained at a temperature which is lower than the atmospheric temperature. Due to higher temperature of atmosphere, heat enters the system. To keep the temperature of the system constant, heat must be removed continuously from the system. Heat removed must be equal to the heat transferred to the system. One of the most important applications of refrigeration has been the preservation of perishable food products by storing them at low temperatures. Refrigeration systems are also used extensively for providing thermal comfort to human beings by means of air conditioning.

Introduction

Agricultural production system achieved a miracle by the way of green revolution which compactualized the potential of photoperiod and the thermo insensitive input responsive crop culture. The productive trends of food crops continued with increased fertilizer consumption, irrigation potential and improved agro-techniques. However science based intensive agriculture with intensive irrigation due to its inappropriate, inpropotional and ambitious approaches put the agriculture productivity on back foot. Because of these problems the arable land is facing the problem to sustain itself in terms of its capacity to produce desirable output. The scenario is further threatened with increase in climate change impact on various natural resources. The projected food crisis is on the card.

Global Packaging Regulations: FDA, EU, FSSAI, and Others FDA (U.S. Food and Drug Administration): The FDA ensures that food packaging materials are safe for contact with food in the United States. Under the Food, Drug, and Cosmetic Act (FDCA), the FDA provides guidelines through the Code of Federal Regulations (CFR), Title 21. Key points include: • Food Contact Substances (FCS): Materials in contact with food must be either pre-approved or recognized as safe (GRAS). Packaging materials, including plastics, paper, and adhesives, must undergo tests to ensure they do not release harmful substances into food. • Migration Limits: The FDA sets allowable limits on the migration of substances from packaging into food, including chemicals from inks, coatings, and polymers. • Food Packaging Certification: Packaging manufacturers must confirm that their materials meet FDA standards for safety in food contact

Introduction

Nanotechnology is a rapidly expanding branch of science that has a critical role to play in raising the standard of living for people in the modern world. The global market for nanotechnology in food packaging is valued at 20 billion in 2023 and is expected to grow to 46.50 billion by 2031, with a compound annual growth rate (CAGR) of 11.32% from 2024 to 2031 (InsightAce Analytic, 2023). The rapid expansion of nanotechnology has paved the way for number of industrial areas, including food processing, food contact materials, and agricultural output (Mohammadi & Jafari, 2021). Nanotechnology is the fastest-growing field of science that significantly enhances the quality of life in today's world. This rapid advancement has opened up numerous industrial sectors, such as food processing, food contact materials, and agricultural production. A natural advancement is the integration of nanotechnology into food packaging. This includes enhanced packaging, active packaging, and a new category known as smart or intelligent packaging. Food contact materials, such as antimicrobial metals and oxides, biodegradable nanocomposites, and nanosensors, are utilized to create active and intelligent packaging. These materials enhance thermal and mechanical durability, increase safety and extend the shelf life of food, and facilitate the monitoring of packaged food (Kah et al., 2013). At the nanoscale, material properties change significantly, making it challenging to predict, identify, evaluate, and manage the health, safety, and environmental risks associated with nanomaterials. For example, nanoparticles (NPs) of 50 nm can enter cells, those of 70 nm can penetrate the lungs, and 30 nm NPs can cross blood-brain barriers.