eChapters

Introduction

Food is an important contributor to human well being and is essential for sustaining life. From this point of view food is expected to contains essential nutrients, such as carbohydrates, protein fat, vitamins and other essential minerals which support life. The food production initially started for individual sustenance which slowly developed in to a community requirement necessitating the involvement of man and machinery for various activities concerned with food. The progress from famine in many parts of the world to the level of self-sufficiency and the role of science and agriculture have been absolutely significant in many parts of the world. India is no exception and the green revolution during the post 1960s and the succeeding blue and white revolution ensured the self-sufficiency in India.

Of late food acts as a vehicle for inclusion of hazard in food meant for human consumption. According to Grunert (2005), factors responsible for the alarmingly higher rate of concern by public include significantly higher number of food scares in public domain, critical understanding of production and processing of certain food products sold in the market as well as the diversified food choices of the consumers in different parts of the world. Besides, the increased awareness of the consumers on food related health issues also have its share in the increased concern on food at large.

Presently food is considered as a commodity which crosses international border concurrent with the human movement and hence quality has become a major concern. The traditional food is getting replaced with value added products, particularly ready to cook, ready to eat, partially cooked products, etc. consequent to life style changes. In order to meet the demand of the trade, the conventional processing is getting replaced by community processing or industrial processing with increased number of players in the primary production, processing, transportation and other value chain activities prompting larger product control. In the process, consumers are exposed to a variety of products produced as business ventures in modern food production systems needing efficient quality control and quality assurance to tackle the issues of quality. The increased incidence of hazards in both raw materials and final products consequent to the absence or inappropriate production schedule calls for increased food safety concerns. Besides the shelf-life of the products, addition of chemicals during the production also add to the concern.

Introduction

As the world population continues to grow, the global market for food products is expanding, together with an increased emphasis on food safety. Consumers have become more discerning in the type of foods they buy and how these foods affect their health and well being. Food safety is generally defined as the assurance that the food will not cause any harm to the consumer when it is prepared and/or eaten according to its intended use ( To achieve food safety, a management system has been developed which aims on preventing problems before they occur, rather than trying to detect failures through end product testing. It also places more responsibility for ensuring food safety on food manufacturers, who have to develop control and traceability of their products from ‘farm to plate’. The system requires the identification of specific hazards throughout the entire process of food production, concentrates on the points in the process that are critical to the safety of the product, and highlights measures for their control (Henson and Caswell, 1999).

Introduction

Tropical tuber crops viz., cassava (Manihot esculenta Crantz), sweet potato (Ipomoea batatas), taro (Colocasia esculenta), yams (Dioscorea sp.), Elephant foot yam (Amorphophallus paeoniifolius), arrowroot (Maranta arundinacea) etc., are the important sources of starch after cereals and are used as staple or supplementary food in many of the tropical and sub tropical countries. Being the crops with adaptability to wide range of soil, climate and environment of the tropics and sub tropics and requiring minimum agronomic input and care for growth, they can be very well fitted into the prevailing cropping systems. They are the most efficient converters of solar energy and have the ability to reserve energy in the form of carbohydrate in the bulky roots and hence tuber crops are also called as calorie density crops. Tuber crops, though branded as poor man’s crops in rural areas have considerable unrealized potential for processing into high end products for food, feed and industrial uses. They are generally consumed as vegetable after boiling it in water and eaten along with some spicy curry or by extracting starch or flour. Besides serving as an insurance crop during times of food scarcity, it can also function as an industrial raw material for a wide spectrum of products

Introduction

Baking is a traditional activity which has a long history, and according to some recent discovery, it is indicated to be dated back to as early as around 21,000 B.C. It is termed as a complex operation of prolonged heat transfer through radiation, convection, and conduction. Baking is considered to be one of the oldest methods of cooking, most commonly the bread baking but it is not only limited to the bread instead it provides a wide range of products such as cookies, pastry, pizzas, breakfast cereals, etc. Baking includes lots of raw materials such as flour, water, yeast, milk and milk derivatives, shortening, sugars, eggs and some minor ingredients such as malt products, cocoa products, dough improvers, inhibitors of microbiological spoilers, spices, etc. Food items which are rich in sugar and carbohydrates such as chocolates, candies are known as confections, and the art of making these products is termed as confectionary. Confectionery can be broadly classified into two major categories, namely sweet confectionary and baked confectionery. Conventionally cake was defined as the flour based sweet food, whereas bread was defined as the flou-based non-sweet food.

Baked confectionery, also known as flour confectionery includes products such as cakes, pastries, and similar baked goods, especially which are served in dessert. These delicacies hold history not much later to the bread baking. Earlier the baked confectionery especially cakes were only affordable by the rich and were prepared for special occasions such as festivity, celebrations, etc. but now a large number of flour confectioneries are being produced in the world which is delightfully acceptable and are much more in demand by a various group of people.

Wheat Production and Consumption

Wheat, rice, maize, barley, sorghum and the millets are the main crops that provide nutrition to people worldwide. The production of grains in different countries depends on the various factors such as water availability, soil conditions, temperature, cultural and economical are most critical factors. Nutritional needs of the developing countries are more dependent on cereal grains compared to the developed ones. Approximately 60% of the calorie requirements in the developing countries are met from cereals. The International Grains Council (IGC) forecasted for total grains production in 2017-18 to 2.079 billion tonnes. There is a need to have major research to increase their productivity, reduce storage losses, enhance efficiency of processing and to ensure food safety in the entire supply chain. Among them, wheat is one of the most important crop species and is a staple food for about 35% of the world population. Wheat is unique among the grains because of its protein type, which when mixed with the water by mechanical forces yields into viscoelastic dough due to the formation of gluten. This unique property of dough is capable of retaining the gases which are produced by yeast or baking powder resulting in the production of an array of leavened products such as bread, cookie and cake.

Wheat is also an important source of dietary proteins for humans but like other cereals, it is deficient in the essential amino acid lysine. Wheat crop is adaptable to the wide range of growth conditions compared to other major cereals and hence it is cultivated widely throughout the world. Wheat cereal is the major dominating staple in the North Africa, Central and West Asia, providing the 50% of the calorie requirement in the region. The world wheat production is 740 million tonnes, with China ranking first by producing 125 million tonnes of wheat annually. Other major wheat producing countries are India, USA, Russia Australia, France and Canada. The global per capita consumption of wheat is about 66 kg, which varies widely in different regions. In Algeria, Egypt, Israel and other Middle East as well as Eastern Europe the consumption of wheat flour is high (150 kg/year). The food uses of wheat in developing countries are more than 80%, while in developed countries it is less than 50%. The consumption of the wheat in developing countries is significantly increasing due to globalization and growing economies. After rice, wheat is a major cereal crop in India and contributes to more than 50% of the total calories. It is grown in the cooler regions of India during the period of November to April. In grain production, rice ranks first with the production of about 105 million tonnes per year. In India, total grain production is 136 million tonnes for the year 2016-17 as per the International Grains Council. India ranks second in the production of wheat in the world and produce about 95 million tonnes annually. The bread wheat (astevum) contributes to approximately 94% while durum wheat is 4% and dicoccum wheat accounts to 2%.

Introduction

Oils and fats are the major class of compounds in lipids. Oils and fats are essential nutrients in both human and animal diets and produced from plant, animal, marine and microbial sources. Dietary oils and fats are concentrated sources of metabolizable energy (9 kCal/gram) compared to protein or carbohydrates (4 kCal/g). According to the recommendations of Food and Agriculture Organization (FAO) of the United Nations, the maximum total fat intake for adults is 30 to 35% E (total energy calories). The minimum fat intake recommended is 15% E for most individuals and 20% E for women of reproductive age and for malnourished populations (FAO, 2010).The current dietary guidelines for optimal health and prevention of diet-related chronic diseases like diabetes, coronary heart disease (CHD), cancer and obesity emphasize the importance of both the quantity and quality of total fat in the diet. In addition to the caloric and nutritional value, oils and fats exhibit many functional properties in the diet. Oils and fats enhance the value of foods by releasing the flavours of other food components, provide texture, increase palatability of food, and impart the feeling of satiety after eating. Oils and fats provide essential fatty acids (omega 3 and 6) which are the building blocks for several metabolic pathways for the healthy life. Oils and fats are excellent carriers of fat-soluble vitamins A, D, E and K, and the absorption of these vitamins is impaired at very low-fat intakes. Due to this reason, sseveral countries have started using edible oils and fats as a suitable vehicle for the fortification of vitamin A and D as edible oils are consumed by almost everyone (Diosady and Krishnaswamy, 2018). Oils and fats are structural bodily components, and are involved in vital physiological processes, including growth, development, inflammation, and brain function. Lipoproteins are important cellular constituents, occurring both in the cell membrane and mitochondria, and also serving as the means of transporting lipids in the blood. Oils and fats are responsible for making biological membranes such as phospholipids and cholesterol, vital for making the cell membranes. Most of the edible oils contain several minor constituents which are known as potent nutraceutical constituents with several health benefits. In addition to edible purpose, oils and fats are being used in many industrial applications such as soaps, detergents, cosmetics, lubricants, specialty chemicals, biofuels, etc. Hence oils and fats are indispensable source for food (edible oils and nutraceuticals), fuel (biodiesel, lubricants etc.) and fabulous chemicals (oleochemicals).

Introduction

Fruits and vegetables (F&V) are good sources of phytochemicals like carotenoids, phenolics, dietary fibers, minerals and vitamins and are considered as important components of a healthy diet. These bioactive compounds in fresh F&V have been linked to delay in onset of many diseases including cardiovascular, chronic and other non-communicable diseases. WHO reported an approximate 3.9 million deaths all over the world in 2017 due to insufficient consumption of F&V (WHO, 2019). Hence, health advisors and nutritionists recommend inclusion of fresh fruits and vegetables to complement the daily diet, and WHO recommends the consumption of a minimum of 400g F&V daily in five portions. However, beneficial raw F&V may contain pathogenic microorganisms, such as Salmonella, E. coli, and Listeria that can pose threat to consumer safety. Since fruits and some of the vegetables are eaten raw, there are chances that pathogenic microorganisms may also enter food chain. Nearly a half of food borne illnesses in United States are caused by microbes on fresh produce (CDC, 2019). The F&V are handled by producers, dealers, wholesalers, retailers and several intermediaries, and therefore, are at greater risk of possible contamination till it reaches the consumer.

The ever increasing demand for F&V has led to overexploitation of pesticides usage in the farms, leading to harmful pesticide residues in air, soil, water and on the F&V surfaces. Thus, it is imperative to maintain the quality and safety of F&V all through the supply chain. In this chapter, we discuss various pre and postharvest factors affecting the quality and safety of F&V, storage techniques to extend shelf life and reduce the safety threat as well as methods available for microbial and pesticide decontamination of fresh F&V.

Introduction

The conventional thermal processing technologies are dependent on high temperature to control the growth of pathogenic and spoilage causing microorganisms. However, the exposure to high temperature for prolonged time results in several biological, chemical and physical modifications leading to their sensory, nutritional and textural changes. Currently, consumers are more interested in minimally processed food products with improved safety and shelf life. In order to fulfill the market demand, innovative non-thermal food processing techniques to inactivate the microorganisms have been developed. These techniques retain freshness, nutritional value and sensory characteristics of food items without any significant thermal degradation.

Non-thermal technologies are used in interdisciplinary sciences, and in many other applied areas. The three main pillars related to the use of novel food technologies are food safety, quality and environmental impacts. Besides the food safety and quality dimensions, these non-thermal processing technologies have the possibility to shorten treatment time, lower energy consumption, and lower carbon footprint. Depending on the source of energy transfer, non-thermal technologies have different types of action. It includes inactivation of microorganisms in radical formation (plasma, ultrasound, ozonation, UV light, etc.); mechanical action through hydrodynamic effects, shock waves (ultrasound and plasma), electric and magnetic fields; or extremely high pressures that are causing disruption of the cell organelle.

The novel non-thermal technologies destroy the pathogens at room temperature as well as utilize less energy compared to conventional ones and have the potential of developing new food products having distinctive functionality. For optimizing the product quality, time for processing and also to inactivate the enzymes and bacteria, each of these techniques can be used either alone or in combination. The adverse effect of some technologies on the sensory, texture, and nutritional values of food could be overcome by using hurdle technology. Combination strategies are more efficient for improving the food quality and have the potential to ensure the microbial safety of foods. An overview of the effect of novel process technologies on the quality and safety of food is elaborated in this chapter.

The dairy processing industry in India deals mainly with the fluid milk and/or short shelf life products, despite India being the largest producer of milk in the world, with an output bordering the 110 million ton mark. This feature offers immense potential in the area of R&D in dairy processing in terms of value addition. The potential gains are many, including higher returns for producers and advantages in terms of health, therapeutic, nutritional and/or gastronomy for the consumers. However, the Indian Dairy Industry can amass possible benefits by being a global contender in trade only when its products are at par with those available in the rest of the world in terms of price and quality. It is evident from the post-WTO scenario that for sustainability, Indian dairy industry will need to maintain wholehearted commitment to quality management right from the farm to the consumer, shedding its inhibitions and resistance to changes.

9.1. WTO Agreements and Food Industry

The General Agreement on Tariffs and Trade (GATT) was formed in 1947 and lasted until 1994, when it was replaced by the World Trade Organization (WTO) in 1995. The WTO is the only global international organization dealing with the rules of trade between nations. It provides a forum for negotiating agreements aimed at reducing obstacles to international trade and ensuring fair deal for all, thus contributing to economic growth and development. Currently, there are 16 agreements to which all WTO members are parties and two agreements to which only some WTO members are parties. WTO currently has 153 members, of which 117 are developing countries or separate customs territories. The Head Quarters of WTO is at Geneva (Switzerland) and the official languages are English, French and Spanish.

Introduction

The dairy sector is one of the most important food sectors, which introduced the physical, chemical, microbiological and sensorial criteria duringprocessing steps and in the final dairy products. Several agents/ingredients of non-dairy origin are commonly used to maintain the quality of milk and milk products during processing, transportation and storage. In general, such ingredients are known as food additives and it can be antioxidants, coloring agents, flavoring compounds, preservatives(naturals and synthetic),artificialsweeteners, vitamins, minerals, stabilizers, emulsifiers and curing agents. From the safety point of view, some toxic agents can come into contact of dairy products duringmilking, storage or processing; such as fungal toxins, heavy metals, antibiotics or radionuclide’s, etc., which need to be identified and processed accordingly. Although addition of food additives in food/dairy product is controlled under country specific food laws or Codex Alimentarius Commission (CAC), few dairyproducts such as butter and unflavored fermented milk products are highly restricted for food additives.

Introduction

Packaging helps to maintain the benefits of food processing and enables safe transportation of foods from their point of origin to point of consumption without compromising the wholesomeness of processed food in terms of its physico chemical and microbiological quality. However, packaging technology must balance protection effects with environmental issues, material and energy costs and should comply regulations on municipal solid waste disposal and release of pollutants. These regulations are different in jurisdictions around the world.

Safety implications of food packaging raise concern in recent times due to advances in technology leading to variety of packaging materials and additives. Also there is an alarming situation of damages to environment and natural resources of the planet, due to indiscriminate use and disposal of packaging materials.

However, food packaging as a means to protect and preserve food integrity, to enhance its shelf life and improve consumer appeal cannot be overlooked.The applications of food packaging and its primary role to protect and preserve food has remained the central focus of packaging innovations.Packaging materials are available in variety of forms and are made up of variety of ingredients.While paper. While paper, plastic, petroleum based materials have been in use for many years, the recent approach is towards environment friendly options from agricultural produce such as plant fibres sugars and starches. Advances in packaging has led to development of newer materials and combinations with specific economic and functional benefits.Food packaging ,in general , provides the ability to withstand thermal processing and acts as a barrier against light, moisture,oxygen and other sources of contamination.

Introduction

Food packaging materials development has been driven by the need to protect food products throughout distribution and storage. Nanotechnology offers opportunities to improve technical packaging features and develop sustainable smart packaging and sensors for monitoring product quality over time. However, the inherent permeability of conventional packaging materials to atmospheric gases and water vapour poses challenges in maintaining optimal conditions for food. The integration of nanotechnology into food packaging has emerged as a promising solution to address these challenges. Nanocomposite materials, composed of a polymer matrix and nanoscale fillers, offer a novel approach to enhancing packaging performance while addressing issues related to food spoilage, degradation, and safety.

Nanocomposite materials encompass a range of nanomaterials, including inorganic (i.e., metals and metal oxides), nanoclay, organic nanomaterials, and nanoemulsions (Huang et al., 2018; Jamaleddin et al., 2019; P. Kumar et al., 2020). NMs are used for three types of packaging: improved packaging, active packaging and intelligent packaging, Nanotechnology facilitates the development of improved bio-based packaging, enhancing mechanical strength and barrier performance while maintaining stability under varying environmental conditions (S. Kumar et al., 2020; Zhang et al., 2020). Active packaging harnesses nanostructures to encapsulate bioactive compounds, encompassing antimicrobials, antioxidants, and oxygen scavengers, which can interact with food and extend its shelf life (Motelica et al., 2020). Intelligent packaging releases active compounds in response to environmental triggers such as temperature or pH changes, transforming packaging into an intelligent, actively responsive material (Jamróz et al., 2019).

For a researcher, laboratory is another home where he/she spends much time every day. As we take care of cleanliness, safety, and design of our home, we must take care on these aspects of laboratory too. It is the responsibility of the laboratory personnel to ensure cleanliness/safety of the laboratory. Since every laboratory chemical and equipment have the potential to cause harms if not used with appropriate precautions. Hence, as a laboratory user, it is our responsibility to follow the basic safety/biosafety rules and regulations set up by the Principal Investigator of the laboratory, Institutional Biosafety Committee, as well as by other regulatory authorities, if any. We must be aware of the general/personal protective measures, cleanliness and laboratory waste disposal prior to joining a research laboratory. In this chapter we will briefly discuss about personal safety, chemical safety, cleanliness, waste disposal, etc.

A. Personal Safety

1. Personal Protective Equipment (PPE)

Personal protective equipment (PPE) is special arrangement to protect the worker from specific hazards because of using a hazardous substance. PPE does not reduce or eliminate the hazard, but protects the wearer from exposure to hazardous material. PPE should not be reused or brought outside the laboratory as these might increase the risk of spread hazardous material or contamination. Used PPE must be kept inside the laboratory in a designated waste storage area adjacent to the work area.

Josephson (1977) studied the effects of food irradiation and sterilization. In radiation sterilization of food (radappertization) the food is exposed in sealed containers to ionizing radiation at absorbed doses which are high enough (25-70 kGy) to kill all organisms of food spoilage and public health significance. Radappertization is analogous to thermal canning for enhancing the shelf stability. In dry products the radappertization process requires the food to be heated to an internal temperature of 70-80°C (bacon to 53°C) to inactivate autolytic enzymes which catalyze spoilage during storage without refrigeration. In order to reduce off-flavors and odors, undesirable color changes, and textural and nutritional losses from exposure to the high doses of irradiation the foods are vacuum sealed and irradiated frozen. Radappertozed foods have the characteristic of fresh foods prepared for eating. Irradiation can be a good substitute for some chemical food additives such as ethylene oxide and nitrites which are toxic, carcinogenic, mutagenic or teratogenic either wholly or in part. Till now, there is no evidence of any adverse effects of radappertization on the foods. Extensive research has taken place towards the space food. During the planning of Apollo missions, Space Food NASA Technical Reports Server (Space Food NASA Technical Reports Server, NTRS ,1994 ) conducted trials including freeze drying.

Sales and distribution determine whether a technically excellent ice cream product successfully reaches consumers in the required condition and at the right time. This chapter examines the architecture of ice cream distribution in India, including factory dispatch, CFAs, distributors, retailers, parlours, modern trade, quick commerce, and online channels. It discusses route-to-market design, presales, delivery systems, distribution management, retail execution, outlet classification, freezer deployment, and channel economics. Product flow and information flow are considered together because sales data, stock information, complaints, freezer conditions, and market feedback influence production and planning decisions. The chapter provides practical insights into distribution KPIs, channel management, cold-chain discipline, and strategies for sustainable market growth.

The use of salt (Sodium Chloride) in food products is an important method of preservation. It not only imparts taste to the products but also helps in checking spoilage of fruit products. Salt is added to pickles, sauces, chutneys, ketchup, and many other products. Food Safety & Standards Regulation has specified the maximum limit of salt in different products. Therefore, the estimation of salt content in food products is considered as an important attribute in food quality control.
Direct Titration Method
Direct titration (Mohr’s) method is used for the determination of salt content in food products as a routine quality control. In this method, the sample is titrated against a standard solution of silver nitrate for the estimation of salt.
Reagents
0.1 N NaOH, Phenolphthalein 1% indicator solution
0.1N Silver nitrate (AgNO3)
5% Potassium Chromate

Sapota is a hardy, evergreen small tree belonging to the family Sapotaceae. It is known botanically as Manilkara zapota van Royen (syns. M. achras Fosb., M. zapotilla Gilly; Achras sapota L., A. zapota L.; Sapota achras Mill.). Sapota, sapodilla, chiku is a hardy tropical fruit tree. In India, it is mainly cultivated for its delicious fruits. The sapodilla is believed native to Yucatan and possibly other nearby parts of southern Mexico, as well as northern Brazil and Northeastern Guatemala. But now its cultivation is extensive in India (Morton, 1987).

The major varieties under cultivation in thes states are as follows:

Andhra Pradesh: Pala, Kirtibarthi, Cricket Ball, Dwarapudi, Guthi Jonavalasa and Jonavalasa Round.

Gujarat: Kalipatti, Bhuripatti, Piilipatti, Dhola Diwani, Jhumakhia and Cricket Ball Maharashtra-Kalipatti: Cricket Ball, and Murraba

Karnataka-Kalipatti: Cricket Ball, Kirtibarthi, DHS 1 and DHS 2

Tamil Nadu: Guthi, Kirthibarthi, Pala, Co 1, Co 2 and PKM 1

8.1 Introduction

Electron Microscopes were developed due to the limitations of Light Microscopes which are limited by the physics of light to 500x or 1000x magnification and a resolution of 0.2 micrometers. In the early 1930’s this theoretical limit had been reached and there was a scientific desire to see the fine details of the interior structures of organic cells (nucleus, mitochondria etc.). This required 10,000x plus magnification which was just not possible using Light Microscopes. The Transmission Electron Microscope (TEM) was the first type of Electron Microscope to be developed and is patterned exactly on the Light Transmission Microscope except that a focused beam of electrons is used instead of light to see through the specimen. It was developed by Max Knoll and Ernst Ruska in Germany in 1931. The first Scanning Electron Microscope (SEM) debuted in 1942 with the first commercial instruments around 1965. Its late development was due to the electronics involved in scanning the beam of electrons across the sample. Electron microscope has been a valuable tool in the development of scientific theory and it contributed greatly to biology, medicine and material sciences. This wide spread use of electron microscopes is based on the fact that they permit the observation and characterization of materials on a nanometer (nm) to micrometer (µm) scale. Electron Microscopes are scientific instruments that use a beam of highly energetic electrons to examine objects on a very fine scale. This examination can yield information about the topography (surface features of an object), morphology (shape and size of the particles making up the object), composition (the elements and compounds that the object is composed of and the relative amounts of them) and crystallographic information (how the atoms are arranged in the object). A scanning electron microscope (SEM) is a type of electron microscope that produces images of a sample by scanning it with a focused beam of electrons. The electrons interact with atoms in the sample, producing various signals that can be detected and that contain information about the sample surface topography and composition. SEM can achieve resolution better than 1 nanometer. The combination of higher magnification, larger depth of focus, greater resolution, and ease of sample observation makes the SEM one of the most heavily used instruments in research areas today.

1. Introduction

Fruits and vegetables represent highly perishable items of agriculture, mainly because of their high water content in fresh form. Their production, yield and management under agriculture is dealt essentially under horticulture. They abound in species and varieties in different geographic regions of the world, influenced by the agro-climatic conditions. Some are endemic and confined to certain geographic regions only. Accordingly, they may be tropical, sub-tropical or temperate, depending on their requirements of temperature for growth and yield.

INTRODUCTION

The state of Manipur is located at the easternmost border of India and is characterized by flat valleys comprising of four valley districts (Bishnupur, Imphal East, Imphal West and Thoubal) surrounded by five mild to steep slope hill districts (Chandel, Churachanpur, Senapati, Tamenglong, and Ukhrul). The state is geographically bordered by Nagaland in the north, Burma in the east, Mizoram in the south and Assam in the west. The total geographical area of the state is 22, 327sq. km divided into 20, 089sq. km in the hills and 2, 238sq. km. in the valley. More than 98% of the population in the hill is in rural areas whereas around 60% of the population in the valley is in rural and around 40% are in the urban areas.

The AAS Unit, Imphal is located at 24045' N latitude, 93054' E longitude at an altitude of 774m above msl. The agro-climatic zone of the state covers sub tropical plain zone, sub tropical hill zone, temperate hill zone and sub temperate zone.

The term food processing covers an enormous field from simple boiling to the use of irradiation to predict the consequences on the nutritional value of fruits and vegetables. Generally, the food processing methods can be categorized as in intentional processing method (milling, peeling, washing trimming etc.), inevitable processing method (blanching, sterilizing, cooking, shredding, and drying) and accidental (inept processing or system). The nutritional losses associated with fruits and vegetable processing with different processing techniques and conditions employed. For example, the heavily processed products are although safe for human consumption but allied with reduced nutritive value. In this regard access to safe and nutritious food is considered as a basic right of humans as it is one of the ways to prevent various ailments by building better health and enforcing immunity. Escalating help awareness has guided the processes to opt for minimal processing food in recent years.
Food commodities subjected to minimal processing are capturing the market Suring to widespread concept that they might help in meeting the current requirement of vital nutrients. Development of minimally processed commodities especially fruits and vegetables have augmented at both retail and consumer levels during last years. Various organisations WHO, FAO, USDA boost up the utilization of minimally processed perishable commodities including vegetables and fruits to lessen the risk of cardiovascular diseases and cancer. Changes occurring in the eating habits have been quoted due to high anxiety for on time availability of these minimally processed fruits and vegetables. Sales of fresh cut fruits and vegetables continue to burgeon and food industries are persistently expanding primary because of consumers’ trend of health realization.

Introduction Sea buckthorn berry belongs to Elaeagnaceae having 6 species (Hippophae rhamnoides, Hippophae neurocarpa, Hippophae salicifolia, Hippophae gonicarpa, Hippophae tibetiana and Hippophae litangenis) and 12 subspecies grown all over the world. India, is having its plantations in chilly and barren conditions of Ladakh, Himachal Pradesh, Uttarakhand, Sikkim, and Arunachal Pradesh. Berries and fruits are believed to have such bio-active compounds like antioxidants in them that it has constructive consequences on health of human beings. Moreover, they are been proven in lessening the cardiovascular diseases, age related issues,cancer etc. Berries of Sea buckthorn is an abundant provenance of these bio-active compounds. One of the major lipophilic compounds is carotenoid pigments. And the concentration of the same has difference depending upon origin of plant, harvesting period and weather conditions. Nutritionally, the fruits have a substantial amount of carbohydrate, protein, organic acids, amino acids, and vitamins. Moreover, it also contains bioactive compounds like carotenoids, dietary minerals, antioxidants, flavonoids, vitamin C, minerals, monosaccharide, organic acids, tannins, etc. Sea buckthorn plant parts are becoming one of the useful and promising nutraceuticals for the food industry and all over the world.

Food packaging

Food packaging is an external means of preservation of food during storage, transportation and distribution and has to be provided at the production center. It forms an integral part of the production process and has an important function in the distribution of food. In today’s consumer oriented market, a package is an extremely vital link between the manufacturer of the product and the ultimate user. There is great awareness among the consumers today regarding their right to obtain proper quality and correct quantity of the product at a fair price in an aesthetic and hygienic package. Hence the basic function of food packaging is to protect the product from physical damage and contaminants, to delay microbial spoilage, to allow greater handling and to improve the presentation.

Need for packaging of fish and fishery products

Fish is a highly perishable food item and should be handled at all times with great care, in such a way so as to inhibit the growth of microorganisms. Fish is having a unique biochemical composition and its quality deteriorates rapidly and the potential shelf life is reduced if they are not handled and stored properly. The quality and type of packaging materials and the methods of packaging and storage are, therefore, of great importance for preserving the quality of fish. Fish and fish products can generally be grouped into fresh fish, frozen fish, thermally processed fish, dried fish and other value added fishery products. Each category requires special requirements for packaging and storage and hence different packaging materials.

Food Safety has been the buzz word in recent days as there are increasing consumer awareness on hazards present in food as well as the ombudsmen role played by independent media. Although regulatory regime across the world has taken proactive steps, in most of the cases it has been a knee-jerk reaction to the impending crisis. Defining the actual goal of food safety has been an arduous task as there are umpteen interrelated factors that influence the intended goals. Some of the definitions on food safety put forward by international agencies are as follows:

Introduction

Seafood provides about 25% of the global intake of animal protein and fetches a huge economy for developing nations. Many challenges concerning food safety and quality exist due to globalization and liberalization of the global f ish trade. International food safety regulatory bodies such as WTO and CAC through SPS and TBT Agreements work on ensuring food safety and quality. Adoption of risk-based analysis and implementation of the HACCP system are encouraged to maintain high seafood safety standards. International regulatory bodies set maximum residual limits for various environmental pollutants and contaminants to ensure consumer safety. Consumer education programs play important role to enhance awareness and improve transparency in the seafood supply chain. Internationally traded seafood products therefore need to meet the standards prescribed for food safety and quality requirements. In case of non-conformance, they could be detained, rejected and destroyed.

The global demand on seafood quality and safety requirement and the complexities of seafood supply chain make difficulty to ensure authenticity and traceability of seaood products in the market. Most seafood is exported from the country where it is caught while part of it via. a third country. Seafood pass-through complex supply chains involving, capture/culture, transshipment, processing, packaging, wholesale, retailing, and consumer. The global trade of seafood has led to a significant concern associated with seafood fraud.

12.1. Seafood Fraud

Seafood fraud is the practice of providing misleading information to the consumers about their product for financial gain. There are nine types of seafood fraud, which include species substitution, fishery substitution, IUU substitution, species adulteration, chain of custody abuse, catch method fraud, undeclared product extension, modern day slavery, and animal welfare

Introduction
 
Whilst food has long been used to improve health, our knowledge of the relationship between food components and health is now being used to improve food. Although most foods can be considered “functional”, in the context of this review, the term is reserved for foods and food components that have been demonstrated to provide specific health benefits beyond basic nutrition. Widespread interest in select foods that might promote health has resulted in the use of the term “functional foods”. Seaweeds are known for their richness in polysaccharides, minerals and certain vitamins [1], but they also contain bioactive substances like polysaccharides, proteins, lipids and polyphenols, with antibacterial, antiviral and antifungal, as well as many such other properties [2]. This gives seaweed great potential as a supplement in functional food or for the extraction of compounds. Physiologically active substances in marine algae are classified into two types based on the difference in the mechanisms viz. (i) non-absorbed high-molecular materials like dietary fibres, and (ii) low molecular materials, which are absorbed and which affect the maintenance of human homeostasis directly. Seaweeds are among the first marine organisms chemically analyzed, with more than 3,600 articles published describing 3,300 secondary metabolites from marine plants and algae, and they still remain an almost endless source of new bioactive compounds [3].

Dairy industry has long dealt with issues of food pathogens and inadvertent adulteration; it is time to review the plant systems with a new perspective. Each plant has its own handling protocols, physical lay-out and employee policies. Milk and other materials entering the facilities, till the distribution of the finished product needs special attention.
 
I. INCOMING MATERIALS

In general, start by considering the milk, food ingredients, packaging, chemicals and other materials that come into plant facility and warehouses, and ensure that these product streams are secure, and that materials are stored in asecure place.

Concept of Delinting

Cotton seed clumps because of linters getting trapped on them after ginning. Gin-run seeds have very low flowability and do not singulate, making cleaning, upgrading, and precise metering in planting operations challenging or impossible. To singulate the seed and increase flowability, a variety of techniques have been and are employed. Most of the techniques entail removing the tags and linters entirely or partially, although other coating techniques have also been attempted with mixed results, both financially and technically (Mezynski, 1966; Webber and Boykin, 1907).

Methods of Delinting

1. Mechanical Delinting

Mechanical delinting is the usual technique used to improve the flowability of cotton seed. As previously indicated, mechanical delinting basically involves resharpening with finer, closer-spaced saws to remove part of the commercially valuable linters.

During processing seeds are cleaned, dried, and graded which are then treated with specific fungicide and insecticide. Seed at this stage is at best quality, which are then packaged into various packaging materials in a specific weight. Packaging or bagging of processed and treated seed is a requisite for easy handling of the bulk seed. Seed packaging can be defined as filling with seed, weighing and sealing the container whereas seed package as storage container where the seeds are kept for marketing or shipping or till the next sowing time.

The Packaging of Seed Involves

1. Filling bags/ containers of uniform size with seeds of known weight.

2. Providing leaflets inside the package with information about any specific cultural practices needed.

3. Attaching labels or certification tags having information regarding all the quality parameters.

4. Temper-proof sealing of the bag.

5. Storage or transportation of the bags.

Sanitation

Sanitation and maintaining good hygiene conditions are the important aspect of seed storage in storage godowns. Maintenance of good hygiene conditions will maintain the quality of produce in the long run (Mahapatra et al., 2014) and these practices should not be overlooked. The threshing floors should be cleaned properly before the operation so that there is no mixing of seeds or any insect-pests or pathogens. Harvesting and threshing should be followed by cleanliness of godowns to protect the seeds from the harmful pest and pathogens (Upadhyay and Ahmad, 2011). The storage godowns should be well lighted and the area should be preferably sunny, free from weeds and mostly situated at elevated areas. Damp areas should not be selected for building storage godowns as it will affect the moisture per cent of seeds thereby enabling easy growth of insect-pests and diseases (Parimala et al., 2013). Before bringing the new produce to the storage godowns, they should be cleaned properly. The cracks and crevices of storage godowns if any should be sealed ahead and the walls of the godowns should be whitewashed (Hazam and Kumar, 2022). The new seed lots should not be mixed with the older lots. The floors should be disinfected, and it should be cleaned regularly.

Concept: The preservation of viable seeds from the moment of collecting until they are needed for sowing is known as storage. Every year, a significant quantity of seeds loses their usefulness due to incorrect storage. Seeds need to be preserved and stored dry. As was previously mentioned, seed moisture content and storage temperature have the biggest effects on how long seeds last. The three main environmental elements that impact seed deterioration and loss of viability are moisture, temperature, and oxygen percentage. For over 90% of species, reducing seed moisture content (MC) to certain thresholds consistently lengthens the seed’s lifespan (Roberts 1973). These species are categorized as “orthodox” in terms of the conditions in which they should store seeds; under suitable dry, cool conditions, they typically maintain viability and germinability even after extended periods of storage. Ellis and Roberts’ improved viability equations have addressed the quantitative impacts of both drying and cooling for orthodox seeds. The life of the seed is often doubled for every 1% drop in seed moisture (when seed MC fluctuates between 5 and 14%) and every 5 oC drop in storage temperature (between 0 oC and 50 oC) (Harrington 1972). Low seed MC and low temperature are hence fundamentals of traditional seed storage. Careful regulation of these two factors is necessary to achieve optimal storage life. But most seed produced annually just has to be kept from harvest until the following planting season. Depending on the type of seed, it may or may not need to be stored at temperatures and relative humidity above room temperature. Regardless of any modifications made for unique uses, the local climate storage facility needs to have a few essential components (Barre, 1954; Wheeler and Hill, 1957).

SENSORY EVALUATION OF FOOD

When the quality of a food is judged or evaluated by the senses (taste, smell, sight, touch and hearing), it is said to be a sensory evaluation. Since food is prepared for the primary purpose of being eaten and enjoyed through the senses, sensory evaluation is most appropriate. No machine has yet been devised that can totally substitute for the human senses in evaluating the quality of human food. However, the human instrument used in sensory evaluation is very complex and many problems need to be managed as data are collected and analysed. Computers are generally used to analyse data from sensory evaluations and may also be used to collect information firsthand.

Flavour perceptions are difficult to characterise verbally, for example, think about how a strawberry tastes, then try to describe it some one else. In food research small groups of trained individuals called juding panels or sensory panels are commonly used to determine differences among food samples. These panels often consist of from 5 to 15 individuals who have had training and experience in testing the particular food products being evaluated.

Principles
The quality of foods can be defined as the ‘composite’ of those ‘characteristics’ that differentiate individual unit of a product and have significance in determining the degree of acceptability of that unit by the consumer. The overall quality refers to technological, physiological, chemical, microbiological, nutritional; and sensory parameters to achieve the wholesome food. Sensory quality attributes such as taste, colour, texture, flavour and overall quality of any food products were evaluated by 9- point Hedonic rating test is used for the purpose of evaluation. This test measures the consumer’s acceptability.

1. INTRODUCTION AND IMPORTANCE

Sensory evaluation is one of the important methods of evaluation of the quality of food. Without the sensory evaluation of a product whether it is fresh or processed, it cannot be launched in the market. All the other methods like physical, chemical and microbiological fails for the product development if sensory evaluation is ignored as the final acceptance can come from the sensory evaluation only. So sensory evaluation has got an upper edge as compared to the other methods of food quality evaluation. However, a collective approach of quality evaluation of a product that includes the physical, chemical, microbiological and sensory evaluation is the most acceptable approach today.

In the past, human sensory perception had been the only mean of assessment of product quality as illustrated by the classical examples of cooks who knew how to mask the off-notes long before the microbial assessment of quality came into existence. Everybody relied on the sensory evaluation of food as a criterion of quality assessment. In the past, even the kings depended upon “tasters” to assure that the food was suitable for their consumption in the past. The role of sensory organs in sensory evaluation of food is shown in Table 1. But later on, with the development of instrumentation, sensory analysis was overlooked and the instrumental methods were preferred as they were supposed to provide absolute measures of quality. Consequently, the product quality was traditionally determined by physical, chemical and microbiological criteria with the assumption that the products meeting the prescribed specifications in the above parameters would automatically meet the desired sensory quality. However, soon it was realized that without sensory evaluation, the acceptability of a product cannot be determined.

Introduction

Quality is the ultimate criterion of the desirability of any food product to the consumer. Overall quality depends on quantity, nutritional and other hidden attributes along with sensory quality. Sensory quality is of great importance to both processors and consumers, since it attracts consumers; it satisfies consumers’ aesthetics and gustatory sense. Sensory quality is the combination of sensory senses of perception responsible for choosing and eating a food.

According to Institute of Food Technologists and the American Society for Testing and Materials, sensory evaluation is a scientific method used to evoke measure, analyze, and explain those responses to products as perceived through different senses like sense of sight, smell, touch, taste, and hearing (Stone and Sidel, 2004). Sensory evaluation gives a general rule for the preparation and serving of samples under controlled conditions so that unfair decisions are minimized. People for sensory evaluation are often placed in individual test booths so that the judgments they give are true and do not reflect the opinions of those around them.

Samples with random numbers are given to the evaluators so that they do not form judgments based upon labels, but rather on their sensory experiences. Products may be given in different orders to each evaluator to help measure and to ensure internal validity by controlling the potential confounds created by sequence and order effects. To control unwanted variation and to improve test precision, standard procedures may be established for sample temperature, volume, and spacing in time, as needed.

Sensory evaluation or testing is a quantitative science in which numerical data are collected to establish lawful and specific relationships between product characteristics and human perception. Sensory methods draw heavily from the techniques of behavioural research in observing and quantifying human responses. For example, we can assess the proportion of times people are able to discriminate small product changes or the proportion of a group that expresses liking for one product over another. Another example is having people generate numerical responses reflecting their perception of products taste and smell.

Sensitivity-Threshold tests Sensitivity tests are conducted to assess the ability of individuals to detect different tastes, odors and feel the presence of specific factors in.

INTRODUCTION

A mixture is a combination of two or more elements or compounds in any proportion so that the components do not lose their identity. Most materials in our world are mixtures and very few materials are pure substances. Foods are complex mixtures of compounds and the extraction or separation of food components is fundamental for the preparation of ingredients to be used in other processes. Separations usually aim to remove specific components in order to increase the added value of the products, which may be the extracted component, the residue or both. Purposes include cleaning, sorting and grading operations, extraction and purification of fractions such as sugar solutions or vegetable oils, recovery of valuable components such as enzymes or flavour compounds, or removal of undesirable components such as microorganisms, agricultural residues or radionuclides. For example, cooking oils from oilseeds or gelatin from connective tissue; or for retrieval of high value compounds, such as enzymes (e.g. papain from papaya for meat tenderisation or rennet from calf stomachs for cheese making). Other types of separation methods are used to sort foods by separating them into classes based on size, colour or shape and to clean them by separating contaminating materials.

The various unit operations of food process engineering applied to solve the problem of changing the compositions of solutions, mixture and solids. Often these operations must be conducted on large scale to meet the demands of a large manufacturing plant. In food processes engineering these operations are often referred to as separation / concentration / extraction / purification process. Usually these operations are directed towards separating substances into its component parts or concentrating a particular substance from another.

Shelf life is a critical measure of ice cream quality and depends on formulation, processing, hardening, packaging, storage, and distribution conditions. This chapter explains the concept of shelf life and follows the movement of ice cream through the storage and distribution chain. It identifies temperature fluctuation and thermal abuse as major causes of quality deterioration, particularly through ice recrystallization and structural damage. The chapter examines hardening, formulation stability, cold-chain controls, shelf-life KPIs, and formal shelf-life studies. Common defects and their causes are also discussed. By understanding how temperature and handling influence product stability over time, manufacturers can establish better controls and protect texture, flavour, appearance, packaging integrity, and consumer acceptance.

This chapter introduces the commercial handling and processing of shell eggs from reception through packing. It examines pre-processing inspection, egg washing, cleaning, sanitization, drying, oiling, shell treatment, candling and defect removal. Automated grading and packing operations, plant layout, equipment, effluent management, sanitation and cleaning-in-place are also addressed. The chapter emphasizes traceability, good manufacturing practices and careful handling to prevent contamination and breakage. It demonstrates how packing stations preserve the quality delivered from the farm rather than creating quality after the fact.

HISTORICAL DEVELOPMENTS

Food Preservation 1782 ó Canning of vinegar was introduced by a Swedish chemist.

1810 ó Preservation of food by canning was patented by Appert in France. ó Peter Durand was issued a British patent to preserve food in ìglass, pottery, tin or other metals or fit materials.î The patent was later acquired by Hall, Gamble, and Donkin, possibly from Appert.

Abstract

This review assesses the nutritional attributes of Amaranth grains and its utilization as food and as formulated foods. Amaranth is a pseudo-cereal and one of the most ancient cultural food plants with excellent source of superior quality protein (rich source of lysine) which is deficient in wheat and other cereals. Amino acid composition of amaranth protein is close to ideal and, as a result, has high food value. Amaranth grain is loaded with phytochemicals including phenolic acids, tannins, anthocyanins, and phytosterols. Amaranth is potentially a good dietary source of the pro-vitamin A carotenoid (f-carotene), antioxidants (nutraceuticals) and canthaxanthin (which has also been reported to be an antitumor agent) and lutein, which is reported to slow down the development of age-related eye diseases. There are also some anti-nutritional factors (Phytic acid, Tannin and Trypsin inhibitor etc.) that may be reduced by certain processing treatments. Several epidemiological studies show Amaranth grains are helpful in reducing several kinds of chronic diseases like cancers, cardiovascular diseases, type II diabetes and various gastrointestinal disorders. Grain amaranth has been tested and recognised by many authorities as a gluten-free foodstuff appropriate for incorporation into the diet for celiac disease patients. Amaranth grain or young leaves could completely or partially substitute common ingredients, so the crop could be potentially exploited as an ingredient in foodformulation in form of flour, flakes, sprouts, grain undergoing fermentation, popping, malting, extrusion cooking, nixtimisation, and special compounds isolation. The interest in this crop is developing due to its several advantageous properties. The nutritionists find that the grain has higher nutritional value than conventional cereals.

Introduction

Our traditional knowledge of medicine has been one of the strongest areas of research because of our rich heritage in herbal plants & great biodiversity in our fauna & flora. Consumption of plant foods and the structurally diverse natural products provided by them have long been associated with health-protective and therapeutic effects. Natural products in plant foods have been shown to have pleiotropic therapeutic and chemopreventive properties. These bioactive products are known to potentiate the efficacy of other drugs and have synergistic effects too. Most of the prescription drugs discovered so far is from plant sources and 75% drugs had been claimed in folklore claims and traditional medicinal system (Reynold, 1991; Benowitz, 1996). The traditional Indian medicinal system utilizes multicomponent formulations of plant extracts which may either act synergistically or avoid many side effects and might have added up trace element through combination of different plant extracts which could have additive effects. However the effort to utilize traditional knowledge in the light of modern scientific findings is lacking in India. Accumulating evidences as well as in-vitro studies implicates inverse relationship between regular consumption of fruits vegetable and the risk of specific cancer. Diet derived nutritional compound mediated interventions in the process of tumorigenesis may be promising chemopreventive strategy with minimal toxicities to the physiological system.

5.1 Introduction

Food is the basic requirement of every living being and it provides physical, mental as well as emotional satisfaction. Globally, there are many food enterprises which provide this basic necessity across the nations irrespective of nature of origin and climatic condition. Food companies are required to provide products at certain quality parameters so as to maintain the uniformity in the food system. Hence, food quality can be defined as a total of traits and criteria which characterize food as regard to its nutritional value, sensory value, convenience as well as the safety for a consumer’s health. Food quality is the quality characteristics of food that is acceptable to consumers. This includes external factors as appearance (size, shape, colour, gloss and consistency), texture, and flavor; factors such as grade standards and internal (chemical, physical, microbial). Due to the various food risks, all over the world the quality regulation authorities have intensified the efforts to improve food quality. Some of the quality related systems are obligatory by law while other is voluntary which are to be implemented by the various food chain members.

Many companies are forced to improve safety and quality of their products by implementing the quality and safety assurance and management system because of growing consumers’ expectations and concerns as regards food quality and safety.

In order to attain maximum profit and decrease the flaws, a new system was developed and followed by various companies all over the world. This new system is known as Six Sigma. The application of this system has the capability to reduce the losses considerably by reviewing the process parameters and increasing the profit exponentially. It constitutes a systematic approach to assure that food products have particular traits at any stage of production and distribution.

Introduction
• Slaughtering of meat animals in way so as to effect minimum pain and suffering to animals is referred as humane slaughter
• Slaughtering method followed should inflict least stress and suffering to the animals
• There are acceptable and the unacceptable slaughtering methods and there is no ‘nice’ method to slaughter the food animals
• In advanced countries, common slaughtering method consists of two steps, stunning and bleeding
• Stunning is done to make animal unconscious and not to feel the pain during actual bleeding process which is followed next
• Exception of stunning-- Jewish and Muslim methods of slaughter
Stunning
Humane slaughter consists of stunning followed by sticking (bleeding). Stunning is the process of making the animal unconscious till it is slaughtered so that the pain suffered during actual act of slaughtering can be alleviated