eChapters

1. INTRODUCTION

Exotic means anything of foreign origin and something not of native growth. Exotic vegetables are those species introduced to a country or location. Broccoli, Brussels sprout, Knol- Khol, Red Cabbage, Lettuce, Asparagus, Baby Sweet Corn, Chive, Garden beet, Kale, Swiss chard, Parsley, Parsnip, Chinese cabbage and Leek are important exotic vegetables. These generally require cool temperature.

Due to increasing foreign culture and increasing living standards, the demand of exotic vegetables is continuously increasing in cosmopolitan cities and five star hotels. These are good in taste and have high nutritive value. Most of the exotic vegetables can be used in salad and soups. These crops are very remunerative.

In urban areas only few part time grower devote time to the production of exotic vegetable. Exotic vegetable farming is profitable venture that require little capital and become source of livelihood to the farmer. The increase in their output level and profit will contributing to food security in the country. About 50% world population living in the cities. The rapid urbanization poses new challenges for food security. It is hard for most of the cities in the developing countries to provide sufficient employment for rapid increasing population. Some district of Maharashtra like Pune, Nasik & Satara now growing exotic vegetables like asparagus and broccoli. Cherry tomato, leek, lettuce, red cabbage & baby corn are also important as exotic vegetables.

In HP cultivation of Exotic Vegetable like asparagus, broccoli, lettuce, leek, chinese cabbage, snow pea, and parsley start picking up in Theog, Matyana, Saproon Valley, Sirmour, Katrain, Manali, Narkanda & Sanj Valley. These vegetables are beneficial for health as they are rich in phyto-chemicals and neutraceuticals. India is endowed with a wide range of tropical, sub-tropical and temperate agroclimatic conditions, therefore almost all kinds of vegetable crops grown around the world can be cultivated in one or the other corner. There is a lot of potential for exotic vegetables for domestic and export market. Important one are:

Ex.No.1. MICROBIAL SPOILAGE OF FRUITS

Fruits are living structures that continue to perform metabolic reactions and sustain physiological processes for a considerable length of time after harvest. The post-harvest infection of fruits by microorganisms may cause serious losses of fruits both in terms of quantity and quality. Initial infection which may be the direct result of mechanical or insect damage is followed by invasion of fruit tissues by secondary infection by common saprophytic organisms. . Many bacteria and fungi, for instance, are involved in decay after harvest. Typical fungi include Alternaria, Botrytis, Colletotrichum, Fusarium, Monilia, Penicillium, and Rhizopus. These fungi are generally weak pathogens, in that they usually infest only weak or damaged fruit. Molds are the most predominant spoilage organisms in fruits. Fungal rots in fruits like apple show brown or cream coloured areas.

Bacterial soft rot caused by Erwinia carotovora is wide spread in fruits that are not very acid. Fruits like straw berries, melons are in direct contact with moist soil and become infected from that source.

Introduction
This method consists of mixing the microorganisms in a small amount of India ink or nigrosine and spreading the mixture over a clean slide. These two pigments are not really bacterial stain and do not penetrate the microorganisms. These pigments make the background dark thus making organisms transparent against dark background. This method is useful for determining cell morphology and accurate size as no shrinkage of cells due to heat.
Materials
1. Bacterial culture (B. subtilis)
2. Microscopic slides (Clean, Grease Free)
3. Inoculating needle
4. Cedar wood oil
5. Microscope
6. Xylene

5.1 Present Status

Export of pomegranate has decreased in quantity from 36,027.43 tons in 2012-13 to 20,997.02 tons in 2014-15, whereas in value term it show an increase trend during the same period. There is tremendous potential for exports of pomegranate from India and it is fact that India is largest producer of pomegranates in the world. Moreover, India produces finest edible quality of pomegranates which are available almost throughout the year. The major Markets of India’s pomegranate during the year 2014-15 were UAE, Nepal, Saudi Arabia, Kuwait and Netherland.

A. Gram’s Staining
Introduction
The most widely used staining procedure in microbiology is the Gram stain, discovered by the Danish scientist and physician Hans Christian Joachim Gram in 1884. Gram staining is a differential staining technique that differentiates bacteria into two groups: gram-positives and gram-negatives. The procedure is based on the ability of microorganisms to retain color of the stains used during the gram stain reaction. Gram-negative bacteria are decolorized by the alcohol, losing the color of the primary stain, purple. Gram positive bacteria are not decolorized by alcohol and will remain as purple. After decolorization step, a counterstain is used to impart a pink color to the decolorized gramnegative organisms.
The Gram stain procedure enables bacteria to retain color of the stains, based on the differences in the chemical and physical properties of the cell wall.
1. Gram positive bacteria: Stain dark purple due to retaining the primary dye called Crystal Violet in the cell wall. Example: Staphylococcus aureus
2. Gram negative bacteria: Stain red or pink due to retaining the counter staining dye called Safranin

1. Introduction

India is a land of large varieties of fruits and vegetables due to its vast soil and climatic diversity. India is the second largest producer of fruits and vegetables in the world, with an annual production of fruits 45.5 Million tonnes and vegetables 90.8 Million tonnes. It contributes 10.23% and 14.45% of the total world production of fruits and vegetables (F&V) respectively (NHB, 2010). Though fruits and vegetables are grown only on 7–8% of gross cultivated area, these contribute more than 18.8% of the gross value of agricultural output and 52% export earnings from total agricultural produce. These have a high export potential of 20-30 times more foreign exchange per unit area than cereals due to higher yields and higher price available in the international market (Sen et al., 2012). According to estimates, the per capita consumption of fruits and vegetables in India is only around 46g and 130g which are far below the stipulation of a minimum of 92g and 300g respectively as recommended by the Indian Council of Medical Research and National Institute of Nutrition. The low availability is mainly due to considerably high post-harvest losses. About 15-20% of the fruits and vegetables are wasted every year in the country, due to poor post-harvest management and lack of infrastructural facilities for processing and storage, amounting to a revenue loss of over Rs. 625 billion.

The sensorial, nutritional, and organoleptic quality of fresh produce starts deteriorating after harvest as a result of soon after harvest the altered plant metabolism and microbial growth. The quality deterioration is the result of produce respiration and transpiration, senescence, ripening-associated processes, wound-initiated reactions, development of postharvest disorders, microbial proliferation leading to postharvest quality loss. Therefore, it is necessary to understand the respiration and ripening processes and the physiological and biochemical changes during ripening. The best way to reduce respiratory metabolism is to reduce the storage temperature. All biological processes proceed more slowly at lower temperature (Yahia, 2007). In general, O₂ levels must be reduced to less than 10 % to see a reduction in the rate of respiration. Respiration rate is temperature dependent; so, as the temperature reduces the amount of oxygen required also drops. Therefore, oxygen levels must be substantially reduced at low temperature for it to affect the rate of respiration. It must however, be ensured that O₂ levels do not fall below extinction point as anaerobic respiration and decay may occur. Tolerance to low O₂ varies between species and cultivars and is also time dependent. Commodities may be able to tolerate low O₂ for short periods of time. Low O₂ can also be tolerated when CO₂ is low.

Materials Required

Fruit, pulper, fruit mill, hydraulic press, screw type juice extractor, stainless steel pans, chemical preservatives, glass bottles, closures, crown corks, crown corking machine, plastic barrels.

Procedure

    1.    Select and weigh sound fruits/vegetables for extraction of juice/pulp.    
    2.    Wash and peel the fruits as required.
    3.    Extract the juice by hot or cold process.
    4.    Pasteurize the juice/pulp to inactivate the enzymes and partially kill microorganisms.
    5.    Preserve the juice/pulp by heat processing after hot filling and hermetic sealing or by addition of permissible quantities of suitable preservatives.
    6.    Label the bottles properly and keep them for storage

EXPERIMENT

TECHNOLOGY FOR EXTRACTION OF KERNEL OIL FROM STONE FRUITS

Apricot, peach, plum, cherries, nectarines etc are the important stone fruits belonging to the family Rosaceae. These fruits are known to contain stones/pits i.e., apricot (6.0-11.5%), peach (7.5-11.5%), plum (4.5-7.0%) and these stones are reported to contain kernels (%) apricot (28.0-32.0%), peach (5.7-5.9%), plum (10.0-20.8%), almond (28.0-30.0%). These kernels can yield an oil yield of (42.5-45.5%), (38.5-41.5%), (39.2-40.6%) and (52.0-58.9%), respectively. Thus, these stone fruit kernels can be utilized for extraction of kernel oil by using the improved technology developed for extraction of oil. The developed technology consists of mechanical decortication of stones by the use of mechanical decorticator, kernel separation by using specific gravity separation technique, oil extraction by using table oil expeller and oil filtration through oil filter press followed by packing in PET bottles and PE pouches.

Mechanical decorticator: The mechanical decorticator is a type of roller crusher consisting of two rollers moving in inward opposite directions with the help of 3 HP motor and is provided with a hopper and feeder assembly. The clearance between two rollers is adjusted according to the respective size of stones.

Table oil expeller: Oil expeller is a 24 patti screw type oil expeller driven by 7HP motor, in which the kernels are fed into the moving hopper at pre-determined flow rate, which are pressed in between rollers (worm) and side walls of the expeller. The kernels are then, passed through the expeller 3-4 times until a thin slice of press cake is obtained.

1. Algal Biomass

Algae is defined as heterogeneous assemblage of organisms that range in size from tiny cells to giant seaweeds, thus algae mostly are photosynthetic species which include eukaryotes and prokaryotic Cyanobacteria (blue-green algae) and live in aquatic habitats. They are ubiquitous in nature and are found in variety of environments ranging from soil, sand, marshes, brackish water, sea and fresh water. Most of them are capable of manufacturing their own food.

Microalgal research is offering wide potential in food biotechnology and is gaining more attention because of presence of wide range of bioactive and nutraceutical properties and added health benefits.The increasing population is one of the major growing concerns of today’s world. To meet the nutritional requirement of the rising population, researchers are looking for optional sources for food which are easy to cultivate, cost effective and produce large amount of bioactive compounds useful to prevent major diseases. Chlorella is unicellular green alga that is a potential source of nutrients like carotenoids, minerals, vitamins, and polyunsaturated fatty acids. Especially, omega-3 fatty acid and carotenoids have received considerable interests due to their roles in the prevention of chronic diseases. Lutein and zeaxanthin from Chlorella have been shown to be associated with eye health and function. Beta-carotene is known to reduce the risk of CVDs and certain cancers. Animal studies also demonstrated that Chlorella supplementation reduced the serum cholesterol levels.

Similarly, the blue green microalgae Spirulina, possesses diverse biological activities and nutritional significance. Regular consumption of Spirulina fortified food improves immune system by increasing phagocytic activity of macrophages, stimulating the production of antibodies and cytokines, increase accumulation of NK cells into tissue and activation and mobilization of T and B cells. Spirulina have also shown to perform regulatory role on lipid and carbohydrate metabolism by exhibiting glucose and lipid profile correcting activity in experimental animals and in diabetic patients. They were also found to be active against several enveloped viruses including herpes virus, cytomegalovirus, influenza virus and HIV. They are capable to inhibit carcinogenesis due to antioxidant properties.

Food extrusion technology is a popular means of preparing snacks and ready-to-prepare food items. It is a method of size enlargement in which tiny granular food or powdered particles are strengthened into bigger parts with various forms, texture, color, etc. Extrusion cooking or thermoplastic extrusion is a common extrusion technology considered to be a process of HTST (high temperature, short time). It allows the manufacturing of a wide range of food products with little or no alteration of the fundamental equipment and adequate process control. Extrusion cooking is used for starchy and protein substances to make nutritious foods. Generally, such products are rich in calories and incorporation of protein rich fish improves its nutritional value. Most of the cereal-based extruded snacks were primarily made from maize, wheat and rice. However, these cereals (e.g. rice) have comparatively low protein content (6 - 8 g/100 g db) and an elevated amino acid profile in glutamic and aspartic acid, whereas lysine is the restricting amino acid. Therefore, it is recommended that protein food ingredient (e.g. fish) be added to the extruded snack products to develop nutrient rich diets.

Fish is considered to be great sources of protein of high dietary importance with a balanced profile of essential amino acids and lipids containing omega-3 fatty acids, in particular essential fatty acids such as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), respectively. EPA and DHA are very essential to normal growth and development. To avoid or moderate coronary artery disease, hypertension, diabetes, arthritis, other inflammatory and autoimmune illnesses, these vital fatty acids are discovered. The benefits of fish-based extruded products will assist in providing a big population in the nation like India with nutritious and balanced diets.

Extrusion cooking is an emerging technology having advantages of low production cost, capable of producing end products in various shapes and sizes, from a variety of food materials with easy digestibility, maintaining hygiene and high product quality and leaving no effluents or hazardous materials. Minimal energy consumption and processing costs and possibility of flavour addition are the added advantages of technology. The process/technique has the versality and ability to constituently produce a given product in continuity at a given set of pre – determined specifications. It destroys fat splitting enzymes to avoid rancidity and thus extends the shelf life of products considerably. Microorganisms present in food materials are destroyed. It can be effectively utilized to develop functional and designer foods by using several locally available under-utilized food materials. However, it leads to increased package cost as puffed or expanded food products have low bulk density. R & D studies are further needed for co – extrusion of variety of cereals with high fibre content foods and micronutrients.

1.1 Introduction and Background

In present scenario, the word “extrusion” refers to a process by which dry or semi-moist ingredients with varying in-barrel moisture are forced through varying barrel temperature, screw speed and screw configuration through a die opening of the desired cross section. In other words, extrusion is predominantly a thermo-mechanical processing operation that combines several unit operations, including mixing, coating, kneading, venting, shearing, heating, forming, partial drying or puffing, depending on the material and equipment used.

The origins of extrusion are in the metallurgical industry, where in 1797 Joseph Bramah patented the first extrusion process, wherein a piston driven device was used for making seamless lead pipes. The present understanding of extrusion technology and the developments or improvements in machine design are largely due to research carried out by the plastics industry. In food industry, this technology is in use since 1930 and its popularity is increasing continuously due to its efficiency, continuity and sustainability. In beginning, sausage extruders were developed in the nineteenth century as simple forming machines. One of the original developments which laid the foundation of the food extrusion was the use of pasta press termed as “cold extruder” in mid 1930s. Furthermore, in the late 1930s, General Mills, Incorporation., Minneapolis, MN, USA, first used a single screw extruder in the manufacture of ready-to-eat (RTE) cereals. Later in 1970s, twin screw extruders were used for the manufacture of moist pet-foods. Twin screw extruders were also adapted from polymer industry, as rising food quality and limitations of single screw extruders were demanding a more versatile process for the newer and higher quality products. After 1970s, the extrusion processing with simultaneous use of heat was popularized as a versatile and highly energy efficient with negligible wastage process. In all these years, number of changes has been noted in the extruder design such as changes in screw design, barrel design and also material used for the manufacture of these materials. Barrel liners availability along with already available segmented screws could further add more economics to the process and increased equipment lifetime. For better wearing characteristics, a number of screw elements of different materials are being used in addition to standard nitrided steel for customized processing needs, such as corrosion and wear resistant surface coated steels, stainless steel, satellite welded and bimetallic HIP (Hot Isostatic Press). JBL Feedscrews Limited, a UK based company recently introduced tungsten carbide coated screw in conjunction with a compatible bimetallic barrel. Likewise, a number of options for barrel metallurgy are available to withstand the higher internal pressure and temperature. Barrels lined with hard cobalt based alloy, typically Xaloy, to give abrasion and chemical resistance are also in use, although, the most common material is carbon steel with a nitride interior. Similarly, steam heated or jacketed barrels were used earlier for cooking purpose which gradually replaced by the electric induction heating elements. These HTST cooking extruders are versatile, highly productive and energy efficient processing machines. They can use a wide variety of raw materials and formulations to produce products with increased shelf-life and convenience.

F0 value: It is used to express F-value when z =10oC / 18oF and the temperature is 121.1oC. It is the number of minutes at a specific temperature (250oC) required to destroy or kill a stated number of microorganisms and has specific z-value. It is also called reference value.

Facing or lining board: The layer of the paper on which the flute is embedded is called facing or lining board (Plate 258).

Facultative anaerobic: Organisms that grow either with or without oxygen.

Facultative parasites: Facultative parasites can adapt to live on dead organic matter and often have a wide host range and can easily be cultured on artificial media. These organisms may be aerobic or anaerobic but under changed conditions, they changes to anaerobic or aerobic.

Falling rate period: It is that part of the drying process during which the drying rate varies with time and the instantaneous drying rate per unit surface or weight of dry material continuously decreases. Falling rate takes place when most of the moisture has been evaporated during constant rate period. The falling rate period during dehydration take place in the final stage of dehydration when the food commodities have large amount of free water available for evaporation. Here, rate of removal of the moisture from the food to the surrounding is continuously decreasing / falling per unit time.

This chapter introduces the major biological, nutritional, environmental and management factors that determine egg quality. It examines genetic and breed influences, hen age and stage of lay, nutrition and feed composition, housing systems, environmental conditions and heat stress. The effects of disease, medication, handling, on-farm management and storage are also discussed. The chapter emphasizes that egg quality results from interactions among multiple factors rather than from a single intervention. Induced moulting and nutritional management are considered as practical approaches to maintaining quality during the laying cycle.

    1.    Wohler (1828) synthesized the first organic compound, urea from inorganic components.

    2.    Emil Fischer (1894) demonstrated the specificity of enzymes and the lock and key relationship between enzyme and substrate.

    3.    Michaelis and Menten (1913) developed kinetic theory of enzyme action

    4.    Watson and Crick (1953) Proposed the double-helical model for DNA structure

    5.    Ingo potrykus (1999) Golden rice- rich in b-carotene.

    6.    Glyoxysomes : Glyoxysomes are temporary in that they occur during transient periods in the life cycle of a plant such as in certain beans and nuts which store fats in their seeds as energy reserves. Glyoxysomes appear in the first few days after seed germination in endosperm cells and associate closely with lipid bodies. They disappear after the storage fats are broken down and converted into carbohydrate.

Introduction
Farm mechanization represents a pivotal shift in agricultural practices, marking the transition from traditional, labor-intensive methods to modern, technologydriven farming systems. This chapter explores the various dimensions of farm mechanization, highlighting its critical role in enhancing agricultural productivity, ensuring food security, and addressing the challenges of global warming. The chapter begins by examinin65g the different types of agricultural machinery and equipment used in modern farming. This includes tractors, plows, harvesters, seeders, and other essential tools that have revolutionized the way crops are cultivated, harvested, and processed. The mechanization of these processes has significantly increased efficiency, reduced labor costs, and improved the overall productivity of agricultural systems. Precision farming and remote sensing are discussed as integral components of modern farm mechanization. These technologies enable farmers to optimize the use of resources such as water, fertilizers, and pesticides, thereby increasing yields while minimizing environmental impacts. Key components of precision farming, such as GPS-guided machinery, soil sensors, and aerial imaging, are explored in detail, along with their applications and benefits. The chapter also delves into machinery management and maintenance, emphasizing the importance of regular upkeep and proper management of farm equipment. Effective machinery management ensures the longevity and reliability of agricultural machinery, reduces downtime, and lowers operating costs, all of which contribute to more sustainable and profitable farming practices. Farm mechanization is highlighted as a crucial factor in enhancing food security. By increasing the efficiency and scalability of food production, mechanization plays a vital role in meeting the growing global demand for food. The chapter discusses how mechanization extends growing seasons, improves crop quality, and diversifies crop choices, thereby contributing to a more stable and resilient food supply. The impact of farm mechanization on global warming is also a key focus of this chapter. While mechanization has led to increased productivity, it has also contributed to greenhouse gas emissions and other environmental challenges. The chapter explores strategies for mitigating these impacts, including the adoption

1. Lecithin is an example of
   1. Carbohydrates
   2. Hormones
   3. Vitamins
   4. Phospholipids
2. Which of the following acts as storehouse of energy in body?
   1. Hormone
   2. Vitamins
   3. Fats
   4. All of these

23.1 Introduction
Various products can also be produced by emulsions that contain fat globules. For instance, cream is produced when milk contains concentrated fat. This cream can be further processed to produce butter, ghee, and butteroil. “Milk fat, ghee, butter oil, anhydrous milk fat, and anhydrous butter oil are fatty products that are exclusively derived from milk or products obtained from milk, or both, through processes that result in the almost complete removal of water and milk solids, not fat.” The method of manufacturing (FSSAI standards) has notably influenced the flavour and physical structure of ghee.

23.2 Types of Fat Rich Dairy Products
23.2.1 Cream or Malayi
“Cream is a yellowish component of milk that naturally rises to the surface when milk is allowed to stand. It is rich in fat globules.” Cream is mechanically separated in the dairy industry. The size of the fat globules is diminished as a result of homogenisation of cream, which renders the product less suitable for whipping.
Cream can be defined as
1. That portion of milk, which is rich in milk fat
2. That portion of milk into which has been gathered and which contains large portion of milk fat
3. When milk fat is concentrated into a fraction of the original milk that portion is called cream.

Fat-rich dairy products such as cream, makhan, butter, butter oil and ghee have played a pivotal role in growth and development of dairy industry in India as well as abroad from the time immemorial. The reference of makhan and ghee has been found in old Indian scriptures. Makhan was popularized by Lord Krishna about 5000 years before. In the traditional Indian dietary regimen, milk fat in the form of malai (cream), makhan (freshly churned butter) contributes significantly towards nourishment of people of almost all ages.

Indian dairy industry, over the years, has been converting surplus milk for the manufacture of fat-rich dairy products, especially ghee and butter with skimmilk as a byproduct because of technological and economic reasons. More than one-third of the total milk production is being utilized for the production of ghee and butter wherein milk lipids, the most expensive constituents of milk are conserved and preserved. Milk lipids play many diverse roles, some of which are essential for human health. Many of the desirable flavour and textural attributes of dairy products are due to their lipid components, consequently, butterfat has, traditionally, been highly valued. Significance of fat can also be realized from the fact that the consumer’s perception of food quality is largely based on the perceivable rich taste. Unfortunately, milk lipids are subject to chemical and enzymatic alterations which can cause flavour defects referred to as oxidative and hydrolytic rancidity, respectively. The storage stability of high-fat products is strongly influenced by these changes.

Procedure: Measurement of smoke point of given oils: Heat the given oils in a deep frying pan till fumes come out from oil. Record the temperature when the fumes come out and noted it as a ‘smoke point’. Cool the oil by keeping oil pan at room temperature. After cooling repeat the heating of same oils 2nd and 3rd time to measure the smoke point and record the observations