eChapters

INTRODUCTION

For thousands of years fermentation processes were largely natural phenomena exclusively identified with food preservation throughout the world. Fermentations can play a significant role in meeting the ever growing food requirements of world population providing benefits in the form of innovative food products with improved nutritional value and food quality along side better safety. Fermentations can be used to address a large variety of food related problems and in the development of processes to meet the demand for food. In the wake of estimations made by international organizations that global food demand and population would increase by two-fold by the year 2050, much emphasis has been placed over the ways and means to increase food production and preservation.

1. INTRODUCTION

Quality, i.e. the degree of excellence or superiority, is a combination of attributes, properties, or characteristics that each commodity value in of human food. The relative importance of each quality component depends upon the commodity and its intended use (e.g. fresh or processed) and varies among producers, handlers, and consumers. Appearance of quality, firmness and shelf-life are important from the point of view of wholesale and retail marketers. Consumers judge quality of fresh fruits and vegetables on the basis of appearance and firmness, flavour (eating) quality of the product. Consumers are also concerned about the nutritional quality and safety of fresh fruit and vegetables.

1. TERMS RELATED WITH BROWNING

Introduction

Food safety and quality are the prime concerns in a global food supply chain. With the globalisation and advancement in the technologies, the global agricultural system transformed to a stage where food standards and international trade work hand-in-hand to promote food safety. The key drivers for this change in food regulations include digital technologies, novel food processing technologies, product labelling, marketing trends, e-commerce, etc. International trade in food sector is governed by the agreement on the application of Sanitary and PhytoSanitary Measures (SPS) and Technical Barriers to Trade (TBT). The agreements allow member nations to impose all measures or standards to protect human, animal, plant life and health, harmonize with the international standards, environmental protection, protection of consumers against deceptive practices and prevention of unjustifiable barriers to international trade.

In general, the developing countries have negligible contribution in the international trade. There are instances where the quality attributes of the commodities do not meet the required parameters as envisaged by the international market. Various issues associated with the product rejection on the basis of food safety and health standards are a matter of concern today rather than before. Hence, United Nations FAO and WTO urged the active involvement of the developing countries in the food standard setting processes in Codex Alimentarius as well as in SPS and TBT Committees. This will ensure harmonisation of food quality standards and traceability for rapid response to food borne disease outbreaks. Governments and local authorities shall intervene in the market place in setting technical regulations; and sanitary and phytosanitary measures which in turn will encourage the food processing companies around the world to implement food safety management systems to ensure the production and distribution of safe foods.

Introduction

Drying is one of the oldest methods of preserving food. Drying and dehydration both can be defined as the process of removing moisture from the foods. It is a simultaneous heat and mass transfer process, wherein heating medium or internal heat generation helps in evaporation of free water molecules from the product. Drying means removal of moisture of food upto a predetermined level where as in dehydration, complete removal of moisture upto bone dry weight of food material. Dehydrated foods have less than 2.5 % moisture content (dry basis) where as dried foods have dry basis moisture content more than 2.5 %. Drying operation consumes energy from 0.38 to 0.63 GJ/ton of food grain. Removal of water from foods using thermal energy thus makes it an energy intensive process. Modes of heat Transfer in various Driers are given in Table 1.Developments in dryer and methods, dryer selection based on form of raw material and typical residence time for various dryer are are given in Table 2,3 and 4, respectively.

Introduction

Fermentation is playing an important role in the human life and is evident from the fact that food can be both spoiled and made by fermentation. A wide range of the fermented food products are consumed by the consumers in their daily routine. It is one for the oldest and ancient method of food preservation. It may have been a mere accident when people first experienced the taste of fermented food. Fermentation became popular with the dawn of civilization because it not only preserved food but also gave it a variety of tastes, forms, and other sensory sensations. Fermentation, along with salting, cooking, smoking, and sun drying, is one of the earliest ancient traditions developed by cultures all around the world to extend the possible storage time of foods. Slowly, people have realized the nutritional and therapeutic value of fermented foods and drinks, and this has made fermented foods even more popular. Bread, beer, wine, and cheese originated long before Christ. Although modern food technology has contributed to the present day high standard of quality and hygiene of fermented foods, the principles of the age-old processes have hardly changed. In industrialized societies, a variety of fermented foods are very popular with consumers because of their attractive flavor and their nutritional value. During food fermentations, the controlled action of selected micro-organisms is used to alter the texture of foods, preserve foods by production of acids or alcohol, or to produce subtle f lavours and aromas which increase the quality and value of raw materials. After drying, fermentation is the world’s oldest food preservation method.

Introduction

The basic physiological structures of mammary glands in all species are almost same and are located externally in order to fulfill the milk requirement of neonates after parturition. The process of secretion of milk from the mammary glands is known as lacto genesis. Milk provides an almost complete nutrition to neonates from birth till weaning period. It is a complex mixture of various constituents like:

Lipids such a striacyl glycerols(TAG),phospholipids,cholesterols and other sterols, free fatty acids and fat-soluble vitamins

Carbohydrates such as lactose, oligosaccharides

Proteins such a scaseins, α-lactalbumin, β-lactoglobulin, immunoglobulin’s, bovine serum albumin, lactoferrin, lysozyme, enzymes, hormones and growth factors

Non-protein nitrogenous compounds like urea, creatine, creatinine, uric acid and amino acids

Major and minor minerals, water-soluble vitamins and cells (leucocytes, macrophages, and epithelial cells).

1. INTRODUCTION

Food is constantly being rated for its quality either consciously or subconsciously by all people. Consumers choose food on the basis of its quality and their individual likes or dislikes. The attractiveness of food is clearly a quality which is important both to the manufacturer and to the consumer. When consumers make a selection they basically look for food that is attractive in terms of colour, flavour and texture apart from other psychological and social factors, which they may associate with food. The nutritional quality, shelf-life/keeping quality and cost factor are other criteria which may affect their selection.

The distinctive and attractive colour of food is not only pleasing but is also an indicator of good quality and freshness. The senses of taste and odour help us in detecting and appreciating different flavours and deciding on whether we like the food. The feel and texture of food entering the mouth should be firm, juicy, crisp and are extremely important characteristics that dictate the acceptance of a food. Today’s consumers are discerning, demanding, and more knowledgeable about food. They expect safe products having good value and high sensory quality. Therefore, knowing consumer’s preferences and perceptions of the sensory characteristics of food and beverage products is vital to food manufacturers. Without appropriate evaluation, there is a high risk of market failure.

Abstract

The irradiation process involves exposing the food, either prepackaged or in bulk, to a predetermined level of ionization radiation. In this process, it is important to know sources of ionization radiation, how energy is quantified, and its scope with advantages and limitations.The traditional methods like preservation, such as drying, smoking and salting have been supplemented with pasteurisation (by heat), canning (commercial sterilisation by heat), refrigeration, freezing and chemical preservatives. ‘Food irradiation’ is another technology that can be added to the list. By realizing its importance present chapter highlighted with some basic aspects as well as its applications and other related aspects of food irradiation. Food irradiation involves basic principles like; Pasteurization (Pathogen Reduction) 2. Sterilization 3. Sanitation 4. Disinfestation. As concern to dosage can be applied as  low, medium and high based on type of radiation, type of food, type of packaging material and time of application. It has broader range of application in preservation with this also has few limitations which have become bottlenecks in this technology. Though technology is employing much in developed countries rather than developing once. Prospectus should be given in those countries also.

1.1. Introduction

Food packaging involves enclosing the food product to ensure its safe delivery to end consumer in safe condition. Packaging is one of the integral components of the food industry. In order to maintain the basic nutritional and functional attributes of food material, they must be packaged safely. A faulty package can ruin all the efforts made to develop the food product. Selection of right packaging system and packaging material is essential to arrest the deterioration of food products from physical, chemical and biological factors. 

Millets are a type of minor cereals found in the Poaceae family. Millets are often described as “Nutri-Cereals” since they contain more nutrients than commonly produced main cereals. They are an important part of human’s diet in the world. These are foods with a high nutritional content, gluten-free and have nutraceutical qualities. The adequate amount of protein (essential amino acid), micronutrients and phytochemicals are found in millets. The phytochemicals found in millet grains enhance human health by lowering cholesterol and phytates in the body. Millets are full of antioxidants, minerals including dietary fibre, iron, calcium and magnesium that are vital for battling a variety of diseases. These are beneficial to include in our daily diet because the grain is healthy and nutritious. They decrease blood pressure, prevent cancer and lessen the chance of tumour growth. The rich nutrient content in millet has many health advantages such as cancer, obesity, lower risk of cardiovascular disease, gastrointestinal issues, migraines and asthma. People utilise millet-based products to fight a variety of nutritional deficiencies and diseases.

Food fortification is the procedure in which micronutrients (essential trace elements and vitamins) are added to the food. As a public health policy fortification can be carried out by the food manufacturers or by the governments to help people in combatting dietary deficiencies within a population. Fortification can be done in food even if these nutrients are originally present or not. However, it improves the nutritional status of a population by overcoming the deficiencies of micronutrients. Deficiency of micronutrients is known as hidden hunger which is a serious health risk. Access to safe and nutritious food is a must.Due to the lack of consumption of a balanced diet, adequate micronutrients are not supplied to the body. Therefore, there is a considerable loss of nutrients during the processing of food. One of the strategies to address this problem is fortification of food.

L - Ascorbic acid : It is a white crystalline compound with a slightly acidic taste. It is readily soluble in water, alcohol, glycerin, propylene glycol and is insoluble in oils, fats, ether, benzene, chloroform.

Lab coat : A loose white coat with deep pockets that is worn in a laboratory or medical office.

For Indian foods

Food processing industries are the fastest growing in India. India is the largest producer of milk, bananas, mangoes, guavas, papaya, ginger and okra. It is the second largest producer of wheat, rice, fruits, vegetables, tea, sugarcane and cashew nut. It is the third largest producer of cereals, coconut, lettuce, chicory, nutmeg, mace, cardamom and pepper at the global level (Highlights of Agriculture Census, 2010-11, http://pib.nic.in/newsite/PrintRelease.aspx?relid=132799). Most part of the income is spent on foods. It is important to establish and nurture mutually beneficial relationships with global food processing, food retail and related supply chain organizations. This will in turn help in the realization of significant business growth opportunities in India, through newer technologies, innovations and ways of value additions. The geographical location of India helps in the export of items to other countries. It is connected to Europe, Middle East and Africa from the western coast and to Japan, Singapore, Thailand, Malaysia, Korea, Australia and New Zealand from the eastern coast. Food processing is a priority sector for the Indian Government, especially in recent times with “Make in India” initiative.The country is considered as one of the most favourable markets because of the easy and affordable credit and other fiscal incentives. The total consumption of food and beverages in India is US$ 369 billion which is expected to increase to US$1.142 trillion and the output in the food processing sector might increase to US$ 958 billion by 2025. This offers a vast market opportunity by the Indian food processing, food retail, transport, logistics and related infrastructure sectors to players in the food processing value chain. The market for plant and machinery in the food processing sector is estimated in the year 2024-25 to be USD 51.41 billion as compared to the current value of USD 17.3 billion (2016-17).

Minor millets, that belong to members of the cereal grass family, are advantageous in areas where large crops like Bread wheat, Rice paddy, and maize are relatively ineffective because they have a wide range of genetic diversity and thrive in marginal environments. The varied soil types, temperatures, heat and light cycles, and rainfall patterns across India all support the cultivation of minor millets. Finger millet, barnyard millet, foxtail millet, proso millet, and many more types of minor millet are used in agriculture. The majority of those who depend on these millets for sustenance and income are small-scale indigenous farmers and dwellers of rainfed areas, mainly among impoverished tribal populations numbering in the millions. Coarse cereals,now a days known as Nutri cereals or nutraceutical flora and are no longer known as coarse cereals as a potential global answer to malnutrition and unrecognized hunger. Minor millets have long been an essential component of Indian tribal societies’ agricultural systems and practices. They have used little millets for both famine prevention and ethnomedicine since the beginning of time. This chapter focuses on how little millet could help people have access to food and nutrition security while reducing hunger and malnutrition.

Chocolate is a product that requires complex procedures to produce. The process involves harvesting coca, refining coca to cocoa beans, and shipping the cocoa beans to the manufacturing factory for cleaning, roasting, grinding , ref ining , conching , moulding and enrobing operations which are accomplished using wide range of machinery. A few have been discussed in this chapter.

1. Bean Roasters

When cocoa beans were first brought to Europe, the method of roasting was quite simple, often consisting of no more than metal trays suspended by chains over a fire, an ancient Middle Eastern technique for roasting coffee. The beans would be stirred by hand with a long stick or paddle until the roast was complete. Needless to day, this was very labor intensive and inefficient. Clearly, something more efficient was needed. The next development in roasting technology was not that far distant from roasters in use today. Metal cylinders or balls that could hold up to several pounds of cocoa beans would be suspended over the embers of a fire. A rod would run through the center and act as an axis upon which the roaster would turn. A hand crank on one end would allow the cylinder or ball to be turned while the beans were roasting. The result was a much more even roast than was before possible. Aspects of this technique remain in many of today’s roasters.

What is Performance Appraisal?

Performance Appraisal (PA) is the process through which an individual employee’s behaviour and accomplishments for a fixed time period are measured and evaluated. The major purpose of measuring and evaluating is to assess the worth or value of an employee. Performance appraisal is a systematic and objective way of judging the relative worth or ability of an employee in performing his task. Performance appraisal helps to identify those who are performing their assigned tasks well and those who are not and the reasons for such performance.

Abstract

Mycotoxins are naturally occurring chemicals produced by fungi growing on grain, feed or food. The fungi that produce mycotoxins in grains commonly include Fusarium, Aspergillus and Penicillium species. The toxins can accumulate in maturing corns, cereals, soybeans, sorghum, peanuts and other food and feed crops in the field and in grain during transportation. The toxins may occur in storage under conditions favorable for the growth of the toxin producing fungi. Diseases in animals and human beings resulting from the consumption of mycotoxins are called Mycotoxicoses. These fungal metabolites are detrimental to the health of both animals and human. Toxicity ranges from acute death to chronic diseases, cancer and reproductive malfunction. Mycotoxin contamination of food and feed grains is a serious economic problem for grain producers and processors because grain contamination impacts market 

14.1. Introduction

There is a tremendous need to change the way society produces, and consumes materials to manage the environmental effect in the growing scarcity of resources. To overcome this issue, recycling process could be a great possibility that reduce the uses of natural resources, maximizethe waste utilization and produce least environmental impact. Unfortunately, packaging materials contribute 40% of solid waste in Western Europe, and 33% in US. In fact, packaging waste is likely to increase in transitioning and developing countries. Recycling process consists of collection, sorting, recovery, and management of packaging materials. As per the report of “Eurostat statistics in 2018”,European Union (EU) generates 174.1 kg of packaging waste per inhabitant, Croatia contributes 67.8 kg per inhabitant and Germany produce 227.5 kg per inhabitant.

Introduction

India is one among the progressive countries in the world in maintaining food and nutrition database efficiently. The country has been in the fore front in signing the resolution on ‘Transforming the World: the agenda for Sustainable Development-2030’. India outstood among the developing countries in food self-sufficiency since seventies with low household hunger rates and low infant mortality rate. In the meanwhile, the country faced double burden of food and nutrition with inadequate dietary intake and under nutrition in one hand and overweight due to low physical activities on the other hand. Rapid increase in population with diminishing food production led to food insufficiency and malnutrition whereas, rapid economic growth and increasing mechanization led to the increasing prevalence of overweight and obesity. Both the under- and over nutrition are associated with health hazards, hence, use of normal body mass index (BMI)would be considered as an indicator for food security (FAO, 2013)