eChapters

Low-temperature preservation is one of the most widely used physical approaches for extending food shelf life without seriously affecting quality. Reducing storage temperature slows microbial multiplication, enzyme activity and chemical deterioration, with inhibition increasing as temperature declines. Refrigeration maintains food above its freezing point, while freezing reduces temperature below zero and converts available water into ice. The chapter examines conventional refrigeration, advanced chilling, freezing, cryopreservation, superchilling and the influence of ice crystallisation on food quality. It explains how temperature, cooling rate and crystal size affect texture, nutritional retention and storage stability, while also addressing the limitations and quality changes associated with prolonged low-temperature storage.

Thermal preservation is among the most established methods for improving the safety and storage life of food. It uses controlled heating to destroy spoilage organisms and pathogens and to inactivate undesirable enzymes. Processing intensity varies according to the target microorganisms, food composition, packaging and required shelf life. Pasteurisation reduces pathogenic and spoilage microorganisms without achieving complete sterility, while sterilisation destroys more heat-resistant organisms and spores to produce commercially stable foods. Ultra-high-temperature processing combines very high temperatures with extremely short treatment periods. This chapter also discusses retort processing, thermal-death kinetics and microbial-inactivation models used to design safe processes while minimising nutritional and sensory damage.

Galactan: It is a polysaccharide in which major monosaccharide subunit is galactose and often found among the pectic substances of cell walls.

Galactoblast: It is also called colostrums. It is female’s first milk after parturition.

Galactometer: It is an instrument used for recording the specific gravity of the milk.

Galactorrhea: A spontaneous flow of milk from the nipple is called galactorrhea.

Galactosamine: An amino derivative C6

Galactose: It is a reducing sugar and is monosaccharide. It is an aldohexose sugar obtained by hydrolysis of lactose.

Galactosidase: An enzyme (actase) that hydrolyzes a galactoside.

Galactoside: A glycoside that yields galactose on hydrolysis.

Galactosyl: A glycosyl radical C6 H11 O5 that is derived from galactose.

Galacturonic Acid: A crystalline aldehyde acid C6 H10 O7 that occurs in polymerized form in pectin.

Tomato (Solanum lycopersicum L.) is one of the most important vegetable crops cultivated in the world. It is used as raw in salads and also used as cooked vegetable in the preparation of curries. Processed items such as tomato puree, ketchup, pickle, chutney, whole peeled tomatoes and tomato powder are also consumed considerably. It is a rich source of Vitamins A & C. Lycopene and other flavonoids in tomato serve as good source of antioxidants. Tomato occupies 5 million hectares with a productivity of 34t/ha. in the world. In India it is cultivated in an area of 0.88 million hectares with productivity of 21 t/ha.

Fishery resources get depleted due to over fishing and one of the important management measure is to assess the fish stock, get update on the status of fishing and devise measures to mitigate fishery resource depletion. Recent examples of such management regulations in Indian fisheries are implementation of minimum legal size for fish catch, regulations brought out to control length and size of fishing fleet etc. With multi-dimensional expansion of fishing activities in India, it is necessary to analyse stock data critically bringing out suitable recommendations for fishery management. Stock assessment models play a vital role in management of fisheries.

Fish stock assessment is an evaluation of the state of the stock as relating to changes in the abundance or composition of the stock to changes in the amount of fishing. It involves the use of theories, laws, models and methods propagated by various scientists. There are two general approaches - population model (Schaefer, 1954, 1957) in which the stock is treated as a single entity subject to simple laws of population growth and the analytic approach (Ricker, 1958, 1975) which considers the abundance of the population as determined by the net effect of the growth, reproduction and mortality of individual members of the stock.

Stock assessment gives us the maximum sustainable yield (MSY), fish mortality, the input and output into the fisheries. The various environmental changes as they affect biological and physical features of a fish species, family or the group need to be assessed by using a model for its stock assessment and the basic data is got from research and commercial surveys.

Research survey is a detailed investigation of the fish based on the objectives. It involves taking the data on biological parameters of the fish (length, weight, sex etc), the food of the fish including the percentage composition. Other factors include the environmental features such as time, weather, position of catch, physicochemical parameters of the water body. Commercial survey involves taking note of basic and important information of commercial usefulness e.g length-weight frequencies, percentage composition etc which are strictly for economic purpose.

Fruits represent a vital component of global agriculture, serving as not only a significant source of essential nutrients but also a lucrative sector of the economy. However, from the moment of their inception on the tree to their arrival on consumers’ tables, fruits undergo a complex journey influenced by a myriad of factors. Among these, pre-harvest practices wield a profound impact on fruit quality, enzymatic activities, texture, ripening, and ultimately, post-harvest transportation losses. Each pre-harvest practice, from mineral nutrition to harvesting methods, plays a distinct role in shaping the biochemical composition and physical attributes of fruits, ultimately affecting their marketability and shelf life. Mineral nutrition stands as one of the foundational pillars of fruit production, with essential minerals serving as building blocks for various biochemical processes. Irrigation practices represent another critical aspect of pre-harvest management, as water availability profoundly impacts fruit development and composition. Different irrigation regimes can influence enzymatic activities, fruit texture, and the timing of ripening, necessitating strategic water management to achieve desired fruit quality while minimizing post-harvest losses. Canopy regulation, achieved through training and pruning techniques, offers growers a means to manipulate light penetration and airflow within the orchard. Moreover, the application of plant growth regulators (PGRs) emerges as a tool for fine-tuning fruit development and ripening processes. By modulating hormonal signals, PGRs can alter enzymatic activities, influence fruit texture, and mitigate transportation losses. However, judicious application is paramount to avoid adverse effects on fruit quality and safety. Harvesting decisions, including the determination of optimal maturity and the timing and method of harvest, profoundly impact fruit quality and post-harvest losses.

HACCP: The Hazard Analysis and Critical Control Points (HACCP) is a scientific, rational and systematic approach to identify, assess and control hazards during production, processing, manufacturing and use of food. It ensures safety of the food. HACCP presents a good opportunity for the food industry for upgrading quality and bringing uniformity and consistency in their supplies to international market, or It is a systematic preventive approach to food safety that addresses physical, chemical and biological hazards as a mean of prevention rather than finished product inspection. It involves identification, evaluation and control of hazards which are significant for food safety.

HACCP plan: A document prepared in accordance with the principles of HACCP to ensure control of hazards which are significant for food safety throughout the food chain under consideration.

Haemagglutinins: A group of proteins of plants that are not antibodies and do not originate in an immune system but bind specifically to carbohydrate containing receptors on cell surfaces (red blood cells). It is also known as Phytoagglutins/lectins.

Haff disease: A pyrolysis due to the excessive consumption of various fresh water fish which contain the vitamin antithiamine.

Vacreation: The pasteurization of the milk or cream under reduced pressure by direct steam is called vacreation. This process removes feed and other volatile flavors from cream and to pasteurize it for butter making. This is also called vacuum pasteurization (Plate 623).

Vacuum: The state of negative pressure. It is equal to atmospheric pressure minus absolute pressure.

Vacuum cooling: A technique of cooling vegetable (leafy vegetables, asparagus, brussels sprouts) having a high surface to volume ratio; rapidly and uniformly by boiling off some of their water at 10C and at low pressure (5 mm of Hg) into a sealed container. The produce is cooled by evaporation of water from the tissue surface and is more rapid than hydro cooling (Plate 624).

Vacuum drier: A drier used to dry heat sensitive products where low pressure lowers the temperature, helps to retain natural flavour and minimizes oxidation and browning is called vacuum drier (Plate 625).

Carbohydrates are polyhydroxy derivatives of aldehydes or ketones and undergo all the organic reactions common to the carbonyl groups and hydroxyl groups. The principal milk carbohydrate is lactose. It is a disaccharide. Hydrolysis of lactose with enzyme β-galactosidase yields glucose and galactose.

Lactose is the major carbohydrate present in all types of milk. The first record of isolation of lactose was in 1663, by Bartolettus by evaporation of whey. Milk contains only trace amounts of other sugars, including glucose, fructose, glucosamine, galactosamine, neuraminic acid, and neutral and acidic oligosaccharides.

Lactose plays a significant role in milk and milk products that are

• It plays a major role in the production of fermented dairy products.

• It contributes to the nutritive value of milk and milk products

• It affects the texture of certain concentrated and frozen products;

• It is involved in heat-induced changes in the color and flavor of highly heated milk products.

Status of Lactose

Lactose content varies extensively in the milk of different species. Breed of animal, individuality factors, udder infection, and especially the stage of lactation regulates the lactose content in milk. The lactose concentration in milk decreases gradually and significantly during lactation; this behavior contrasts with the lactational trends for lipids and proteins, which, after a decrease during early lactation, increase significantly during the second half of lactation. Lactose synthesis is hampered during mastitis. Lactose, along with sodium, potassium, and chloride ions, plays the principal role in controlling the osmotic pressure of the mammary system. Thus, any change in lactose content is compensated by a change in the soluble salt constituents. The osmotic relationship between lactose and soluble salts during the secretion of milk partly explains the presence of high lactose in milk with a reduced ash content and vice versa (Table 1).

13.1 Introduction

Hospitality industry is the second largest industry in the world. It is well diversified and can be chosen as per the interest. Hospitality management involves planning, organizing, directing and controlling human and other resources within the different segments of hospitality industry i.e. lodging, restaurant, travel and tourism, institutional management, recreational management, meeting and convention planning industries. Although, these all are separate but related segments of the hospitality industry and are interrelated to provide good and efficient services to the guests and users. Hospitality industry provides services which are need oriented and differ in various parts of the world as per regions and the traditional styles.

The first building created specifically for hotel was ‘City Hotel’ with 73 rooms at 115 Broadway, New York in 1794. Pallonjee Pestonjee established the very first western-style hotel in India, “The Bristol Hotel” in Mumbai in 1840. According to the report of the department of Tourism, Government of India, at the end of the year 2004, there were 167 Five star hotels with approx. 28,900 rooms, whereas 126 Four star hotels, with 8,831 rooms [2]. To expedite the ongoing process of classification/re-classification of functioning hotels in one to three star categories, five Regional Committees have also been set up in Delhi, Mumbai, Kolkata, Guwahati and Chennai to conduct inspection [3].

Macaroni: Pasta made from semolina and shaped in the form of slender tubes.

Macaroni wheat: It is tetraploid wheat and is preferred for making macaroni, vermicelli etc.

Macaroon: A small cookie composed chiefly of egg whites, sugar, and ground almonds or coconut.

Mace: An aromatic spice consisting of the dried external fibrous covering of a nutmeg.

Macronutrient: A chemical element (as nitrogen, phosphorus, or potassium) of which relatively large quantities are essential to the growth and health of a plant or a substance (as protein or carbohydrate) essential in large amounts to the growth and health of an animal.

Magnesium silicate: It is use as glazing and polishing agents in confectionery products.

Magness - Taylor Pressure Tester: It is used to study the compression or firmness of peas, pear and apples.

The food we eat contains nourishing substances called nutrients which are required by human body for proper functioning and maintenance of body health. They are classified into five groups such as:

Carbohydrates,

Protein,

Fats,

Minerals

Vitamins

Packaging : Packaging of fruits, vegetables, flowers or any other commodity is chiefly done to assemble the produce in convenient units of different sizes, shapes & types for storage, transportation, marketing and distribution. The size of units may vary depending on the requirement e.g for retail marketing smaller units are preferred and for bulk transportation and storage, large units would be more convenient.

Why do we Require Packaging?

Imagine there is no packaging material and technology available. How we are going to transport apple, mango etc. to distant markets? Definitely as loose. Then how can we weigh or count the fruits being transported or marketed? This would be very difficult. Had there been no packaging the commodity would have suffered great physical, chemical and microbiological losses. It would have been very difficult to handle, manage, transport and market the produce as loose and unpacked. Therefore, the packaging of fresh as well as processed commodities was needed to contain, unitize and protect the produce.

Nature has made such a beautiful system that a fruit does not spoil unless its outer covering is removed and till it is there on the plant. For example banana will not spoil for long time if we do not remove its peel. Similar is the case with apple, guava, mango and many other fruits and vegetables. But as soon as the outer covering is removed the damage begins and the commodity is spoilt very soon.

Preservation is extending shelf life of fresh or processed food by using various methods and prevention or reduction of spoilage. Better the preservation, lesser the spoilage, more the spoilage poorer and inefficient is the preservation.

Therefore, in order to prevent or reduce the spoilage, we have to first identify and understand the causes of spoilage. There are chiefly 3 agencies that cause spoilage in fruits and vegetables i.e. (i) microorganisms, (ii) enzymes & chemical changes and (iii) man, animals, rodents, insects, etc. For effective preservation we have to check the growth and activity of these spoilage causing agencies. So, in order to prevent spoilage and preserve a perishable commodity for long time the following principles and methods are to be followed.

Being an essential component of the rich Indian past, traditional dairy products and a sophisticated classification of confections have played a significant role in the Indian economy. Depending on how it is processed, it has significant social, cultural, and economic significance. These products have been developed over a long period using a combination of experience, traditional wisdom, and culinary skills. India is emerging as the highest milk- producing country in the world with an annual production of 221.1 million tons in the year 2021–22 (Source: Basic Animal Husbandry Statistics, MoFAHD, DAHD, GoI). An estimated 50% of the milk produced in India is used to make a range of traditional dairy products, including paneer, dahi, ghee, khoa, and shrikhand. The product is not only well- established in the Indian market, but it also has significant export potential due to the large Indian diaspora living all over the world.

All native milk products that have developed over time using locally accessible technologies are referred to as traditional Indian dairy products or Indian indigenous milk products. The Indian masses’ economic, social, religious, and nutritional well- being are greatly influenced by traditional dairy products.

Classification of Traditional Indian Dairy Products

Traditional dairy products in India are typically made, packaged, and/or sold using time- honored methods without the use of machinery or meticulous documentation of the procedure. These products do, however, have several technological advantages, including their widespread appeal, reduced cost of production, straightforward manufacturing process, adoption at the rural level or collection center, large profit margin, and abundance of employment opportunities. These products are categorized according to the manufacturing principle.

Climatic Factors and Crop Growth

Crop growth depends on internal and external factors. Internal factors are mostly genetic or hereditary factors which include high yielding ability, resistance to lodging, tolerance to adverse conditions such as drought, flood and salinity, tolerance to insect pests and diseases, and grain quality. The external factors include climate, edaphic, biotic, physiographic and socio-economic factors.

Vitamins are naturally occurring, vital nutrients that are needed in small amounts. They are important for bone and tissue health, wound healing, growth and development, immune system function, and other biological processes. These vital organic substances serve a variety of biochemical purposes. Vitamins, like minerals, are not biosynthesized by the body. Consequently, in order to maintain our health, we must obtain them from the food we eat or, in rare circumstances, supplements.

Vitamins in Milk

Together with water- soluble vitamins like vitamin C and B complex and provitamins, milk also contains a variety of fat- soluble vitamins like A, D, E, and K. Some of these vitamins do, however, have very low concentrations.

Vitamin A (Retinol)

Plant foods contain carotenoids, which are the precursors of vitamin A, whereas animal foods provide preformed vitamin A in the form of retinyl esters.

The packaging requirements for food products go beyond mere containment. Effective packaging must serve multiple functions, such as protecting food from physical and environmental hazards, providing convenience to consumers, and acting as a medium for communication and branding. Each requirement is essential to ensure food quality, safety, and longevity, as well as to meet consumer expectations and regulatory standards. As food products vary in their characteristics and shelf-life requirements, packaging must be tailored to suit these specific needs while also considering factors like transportation, storage, and market positioning. This chapter delves into the fundamental requirements of food packaging, examining the functional roles that packaging plays across various product categories. By understanding these requirements and functions, we can appreciate the complexity of designing effective food packaging that fulfills multiple roles in the modern food supply chain

Agriculture and Food Security

Food security refers to a situation when people gain physical and access to enough food to meet the dietary requirements for a healthy life for all times. A household can have food security when all the members lead a hunger free life. It is estimated that nearly 800 million people in the world go to bed hungry every night. Food security exists when all people, at all times, have physical and economic access to sufficient, safe and nutritious food that meets their dietary needs and food preferences for an active and healthy life (World Food Summit, 1996). This definition gives rise to four dimensions of food security: availability of food, accessibility (economically and physically), utilization (the way it is used and assimilated by the human body) and stability of these three dimensions.

Lamination and coating techniques are integral to modern food packaging, providing additional layers of protection, functionality, and appeal to the packaging materials. These techniques enhance barrier properties, improve durability, and enable packaging to withstand a range of environmental and mechanical stresses. Lamination typically involves bonding multiple layers of materials to achieve specific characteristics, such as moisture resistance, heat stability, and strength. Coating, on the other hand, adds a surface layer that can enhance properties like grease resistance, sealability, and printability. This chapter explores the various lamination and coating techniques used in food packaging, examining their applications, benefits, and potential limitations.