eChapters

INTRODUCTION

The discipline of Agrometeorology, an applied science is less than fifty years old. Its services are operationally used by individual farmers in developed countries, and by agricultural or development services in more than half of the countries of the world. Its contribution to agricultural production by examining forecast is sought in virtually all countries. In many countries, the respective governments have expressed the desire to use meteorological information to a much larger extent in day-to-day farm planning and operations. The climate database is used for the development of practical criteria in planning and management of irrigated and rainfed crop production system (Martin Smith, 2000).

Though a huge set of Agromet data exists in India, its utility has not been effective due to the scattered location of these data sources and the impediments for free flow of data to the users to analyze and interpret for real-time decision making in agriculture. There is also a considerable time lag between the actual observation and data availability. In view of the importance and the immediate exigency to centralize the database system for helping the researchers and planners, a central agrometeorological databank facility funded by DST from 1998 to 2003 and later by ICAR with the following objectives was established at Central Research Institute for Dryland Agriculture (ICAR), Hyderabad.

Need for climate-smart agriculture strategy

Climate change has long-lasting and potentially detrimental consequences on the agriculture sector. Changes in weather events cause perturbations across agricultural ecosystems and have impact on farm productivity. Adopting the climate-smart agriculture approach has thus, become inevitable in order to build resilience in agriculture systems and cope up with climate change. With a view to implementing climate-smart agricultural practices to ensure climate resilience, certain broad strategies have to be adopted. The CSA approach is designed to identify and operationalize sustainable agricultural development within the explicit parameters of climate change (Climate Smart Agriculture Sourcebook.FAO.2013). It integrates the three dimensions of sustainable development (economic, social and environmental) by jointly addressing food security and climate challenges.

1.1. Global Dairy Scenario

Global milk production is forecast at 852 million tonnes in 2019, an increase of 1.4 per cent from 2018 (DAHD, 2019) – a smaller rate of growth, reflecting downward revisions made for India and the European Union. Much of the anticipated output expansion will originate in India, Pakistan, China, the European Union, and Brazil, partially offset by declines in some countries including Australia, Colombia, and Argentina. In India and Pakistan, herd expansions drive output growth, while in China, farm efficiency improvements underpin higher growth. The output is increasing in the European Union, although slowly as dry weather limited the supply of milk during the summer, whilst rising dairy herds and stable milk prices are supporting higher production in Brazil. By contrast, the output may decline in Australia and Colombia due to dry weather, whereas in Argentina, rising feed costs and restrained consumer demand may dampen production. Elsewhere, in the United States, higher milk yields hold up the growth momentum, whereas, in New Zealand, favourable weather corroborates a positive production outlook (DAHD,19).

Application of Climate-Smart Agriculture

Agricultural production systems are expected to change in response to climate change and ensure food security in different countries. Climate variability may further affect the agricultural production in future. To meet such challenges, there are many options to reduce the negative impacts of climate change on agricultural systems, make them resilient to climate change, and reduce emissions. Many technologies and practices can increase crop yields, farm income, and input-use efficiency, and may reduce GHG emissions (Khatri Chhetri et al. 2017). Climate-smart agriculture (CSA) is suggested to address the adverse effects of climate change and ensure food security. It is intended to achieve the three objectives of ensuring productivity, adapting and building resilience and reducing emission of GHG.

Cheese, butter, whole milk powder, and skimmed milk powder are a major part of the world’s dairy trade. The demand for worldwide dairy exports is highly concentrated. With a share of 12 per cent, New Zealand is the largest exporter of dairy products, followed by Germany, Netherlands, France and the US. Germany has been the world’s major dairy importer as well with a share of 10 per cent. Other large dairy product importers are China, Netherlands, France, Italy and Belgium.

Before 1999, India was a net importer of dairy products. The successful implementation of the ‘Operation Flood’ program and trade reforms caused the direction of India’s dairy trade to change marginally. India has been a net exporter of dairy products since 2000. Statistics show that India’s export share of dairy products over world dairy exports increased marginally from 0.1 per cent in 2001 to 0.5 per cent in 2019, while its import share of dairy products over world dairy imports increased marginally from 0.018 per cent in 2001 to 0.04 per cent in 2019. The Middle East, South Asia, South East Asia, and the USA are the major markets for India’s dairy products. Conversely, India is a favorable market for the European Union, New Zealand, Australia, UAE, and US dairy products.

1. INTRODUCTION

The demand for high quality planting material is steadily increasing due to interest in vegetable gardening. The need of setting up plant nurseries to meet the demands of the people has been felt by small and marginal farmers as well as by gardeners and farm house owners. In order to meet this demand, there is ample scope for introduction of small nurseries which will serve to augment the incomes of needy sections of rural society. Almost all vegetables crops are propagated by seeds, except sweet potatoes, asparagus, garlic, potato etc., which does better if propagated vegetatively. Among the vegetable crops which are propagated by seeds, cucurbits, beans, peas, radish, turnip, carrots and leafy vegetables seeds are sown directly in the fields. Other vegetables like cabbage, cauliflower, tomato, onion, chilli etc. are first sown in nursery beds where seedlings are raised and then transplanted.

INTRODUCTION

Rubber cultivation in regions extending from 10°N to 10°S latitude is known as the traditional region and the areas other than its natural climatic origin is termed as the non-traditional region. Northeast India comprises majority of the non-traditional areas in India with major climatic constraints like high seasonal rainfall, excessive precipitation and to some extent dry conditions. These areas extending from 22 to 29^°N latitude, holds promise in extending rubber cultivation because of its exceptional climatic make-up and abundant amount of annual precipitation (2000 mm) distributed over a fair period of time.

This perennial crop generally yields latex rubber at the 7th year after planting (with an economic life span of 20 years), although the period (immaturity period) it requires, is higher in the non-traditional region (Rubber Growers Companion, 2006). This immaturity period has also been shown to reduce with water availability in sub-humid climates (Vijayakumar et al. , 1998). Harvest of this crop is by tapping. Tapping is a process of controlled wounding during which thin shavings of bark are removed, thus opening the latex vessels which exude latex. Dry rubber yield is obtained after the latex is coagulated and rolled into sheets (about 500gm) which is then smoked and dried.

1. Sample: One or more units selected from a population of units, or a portion of material selected from a larger quantity of material
2. The Standard Operating Procedures (SOPs) should contain full working instructions as well as information on applicability, expected performance, internal quality control (performance verification) requirements and calculation of results. It should also contain information on any hazards arising from the method, from standards or from reagents.
3. Analytical Samples: The quantity of the analytical sample to be used is usually indicated in tests and assays. Unless otherwise specified, the quantity used may deviate by 10% from that stated. All quantitative determinations should be conducted on triplicate test portions and in these cases, the amount actually taken should be accurately weighed or measured and the result of the analysis calculated on this exact quantity. When substances are to be “accurately weighed” in a test or assay, the weighing is to be performed in such manner as to limit the error to ± 0.1% or less. Quantities smaller than 100 mg should be weighed to the nearest 0.1 mg.

1. Introduction

Rasogolla is a sweetened dairy product which is made from milk mainly from casein protein. Generally rasogolla is made by heating the raw milk around 80-850C ,then slowly cool the milk around 650C and acid coagulation of the milk is done. Then separate the channa (mainly casein) and whey, and drained the whey followed by the pressing of the channa to remove the excess water. Then channa is thoroughly kneaded and are rolled to balls and cooked in sugar syrup and get the rasogulla. Total value of 1000 billion for Indian dairy output in 2001, the output of traditional dairy products is estimated at over 400 billion. The share of the organized sector in the indigenous products is at present only 50 billion only (Patil, 2005).

Several centuries ago, perhaps as early as 6000-8000 BC, ancient man learned to domesticate species of animals for obtaining milk for their consumption. These included cows, buffaloes, sheep, goats, and camels, all of which are still used in various parts of the world for the production of milk for human use. The significance of milk as the most wholesome single food available in nature has never been debated. It is as ancient as mankind itself. The role and consumption pattern of milk in the traditional diet varies widely in different regions of the world. The tropical countries have not been traditional milk consumers, whereas in Europe (especially Scandinavia) and North America, milk and milk products have been traditional parts of the diet.

Abstract

Consumer now-a-days relies on manufacturing and processing standards, particularly to know what ingredients are present, due to dietary, nutritional requirements, or medical conditions (e.g., diabetes orallergies). Modified PCR and combination of PCR with other analytical tools have been successfully used for analysis of various parameters related to functional foods such as detection and quantification of beneficial as well as food borne pathogenic microorganisms, food allergens, raw material source, bioactive compounds, genetically modified foods. Multiplex PCR method has been found to be an efficient tool for simple, rapid, and reliable identification of Lactobacillus and Bifidobacterium in probiotic products. Food allergens like gluten, peanut, hazelnut etc. could be easily detected in foods using PCR, even if present in small quantities. BOX-PCR and PCR-DGGE analysis have been used for identification of bacterial diversity of a naturally fermented functional food (Enzyme). HPLC combined with real time -PCR were successfully used to quantify and analyse compounds of secondary metabolites like phenylpropanoid amides, which represent an important class of nutraceutical having strong antioxidant and chemotherapeutic effects in various transgenic tomato tissues. Detection of active compounds in natural plant products were successfully achieved using PCR techniques. In general PCR have gained more importance as it has high sensitivity, improved precision, wide dynamic range for quantification, genotype based and is quick method of detection and quality control of foods than traditional culture based methods.

Pineapple is a wonderful tropical fruit having exceptional juiciness, vibrant tropical flavour and immense health benefits. Pineapple contains considerable calcium, potassium, fibre, and vitamin C. It is low in fat and cholesterol. Vitamin C is the body’s primary water soluble antioxidant, against free radicals that attack and damage normal cells. It is also a good source of vitamin B1, vitamin B6, copper and dietary fibre. Pineapple is a digestive aid and a natural Anti-Inflammatory fruit. A group of sulfur-containing proteolytic (protein digesting) enzyme (bromelain) in pineapple aids digestion. Fresh pineapples are rich in bromelain used for tenderising meat. Bromelain has demonstrated significant anti-inflammatory effects, reducing swelling in inflammatory conditions such as acute sinusitis, sore throat, arthritis and gout and speedy recovery from injuries and surgery. Pineapple enzymes have been used with success to treat rheumatoid arthritis and to speed tissue repair as a result of injuries, diabetic ulcers and general surgery. Pineapple reduces blood clotting and helps remove plaque from arterial walls. Studies suggest that pineapple enzymes may improve circulation in those with narrowed arteries, such as angina sufferers. Pineapples are used to help cure bronchitis and throat infections. It is efficient in the treatment of arterioscleroses and anaemia. Pineapple is an excellent cerebral toner; it combats loss of memory, sadness and melancholy. Pineapple fruits are primarily used in three segments, namely, fresh fruit, canning and juice concentrate with characteristic requirements of size, shape, colour, aroma and flavour.

Introduction

Food safety and quality assumes paramount significance in any food industry. Globalization has driven both the food and agricultural firms to adopt systems that functions in a way to interlink food standards and international trade so as to achieve superior food quality and safety. Food industries follow several regional and international food safety procedures to procure certification from the government and other agencies in order to survive in both domestic and international markets (Ryan, 2014). The essential components in the food safety include handling, preparation and storing of the food products to ensure the food quality and to avoid food-borne diseases. The unwanted substances in a food product included by an accident is known as contaminants and the unwanted substance added to the food product to reduce the cost or to improve the other properties are known as adulterants. Contaminants and adulterants may lead to pathogens and toxins that pose serious concerns over the health of the consumer (Jha, 2016). The adulterants and contaminants are classified as physical adulterants and contaminants, chemical adulterants and residues, microbiological and pathogenic contaminants and toxins.

Hazards in food can be categorized into physical, chemical and biological.

Physical Hazards: Physical hazards are foreign organic or inorganic objects or extraneous materials in the food products. Hard and sharp physical hazards are of particular concern. Examples of physical hazards are broken glass, plastics, metal pieces, wood pieces, stones etc.

In this chapter, the importance of seafood in terms of their nutrition, and different methods of processing are dealt. Seafood quality and safety terminologies are explained briefly. The quality parameters affected by rigor mortis in raw, iced and cooked fish are given. Phenomenon of gaping described with reference to rigor mortis. Quality dimension of seafood is explained with intrinsic and extrinsic parameters. Various intrinsic factors affecting seafood quality such as f ish species, seasonal changes, parasite infestation and capture conditions are discussed in detail. The next part elucidates the sensory parameters affecting the seafood quality describing the objective and subjective method of quality assessments. Objective method covers both descriptive and discriminative tests. The final part mentions the Codex guidelines available for the conduction of seafood sensory assessment. At the end, the reader gains the knowledge on the basic information about seafood, role of rigor mortis in affecting seafood quality and the sensory quality assessment methods.

Objective

To learn the nutritional importance of seafood and their processing; rigor mortis and their role in seafood quality, intrinsic and extrinsic factors affecting seafood quality and sensory quality assessment methods.

1.1. Importance of Seafood

Seafood has been traditionally a part of diet in many parts of the world. In some countries like India, it constitutes the main supply of animal protein among coastal population. Seafood is a low-calorie food and easily digestible compared to other protein-rich meat and poultry products and hence, it is a good choice for elderly persons to obtain their daily protein requirements. Seafood has high-quality quality enriched with all the essential amino acids required for human health. It provides about 1/3rd of the average recommended daily allowance (RDA) of protein.

INTRODUCTION

Pulses are edible fruits or seeds of food bearing plants belonging to the family of the leguminosae. The major pulses which find important place in our diet are redgram dhal, bengal gram dhal, black gram dhal, green gram dhal and masoor dhal. Some are used as whole grams cow pea, rajmah and dry peas also belong to leguminous family.

Legumes not only have dietary values but also play an important role in maintaining or even improving soil fertility through their ability to fix atomospheric nitrogen.

Abstract

Prebiotics are the non-digestible food ingredients that beneficially affect the host by selectively stimulating the growth and/or activity of one or limited number of bacteria in the colon. These are heat resistant components which remain intact during the baking process; this allows prebiotics to be incorporated into every day food choices. Consumption of non-digestible ingredients allows the growth ofbio cultures by reaching the intestine unaffected by the digestion process resulting in improvement of digestive health. Prebiotics reach the intestine in an unaltered form and shows the prebiotic effect when there is an increase in the activity of healthy bacteria in the human intestine. The prebiotics stimulate the growth of healthy bacteria such as bifidobacteria and lactobacilli in the gut and increase resistance to invading pathogens. Functional foods increase consumer choice by adding prebiotics to every day food items such as cereals, biscuits, breads, table spreads, drinks, and yoghurts. By continuing to eat and drink common foods, but choosing functional alternatives (such as bread containing prebiotics) dietary requirements can be met, without significant changes to foodpreferences. Some common example of cereal based products containing prebiotics are oat-based prebiotic drink, Breakstone's and Knudsen live active cottage cheese, prebiotic yogurt- Attune and Muller vitality, multi-fruit drink enrich and flavoured water enrich, prebiotic flavoured water, prebiotic capsules, dried fruit bars, prebiotic powder- Biocare fructo-oligosaccharides, Newtree purplaisir chocolate spread. The claims are constipation relief, suppression of diarrhea and reduction of the risks of osteoporosis, atherosclerotic cardiovascular disease associated with dyslipidemia and insulin resistance, obesity and possibly Type-2 diabetes. At present, claims about reduction of disease risk are only tentative and further research is needed.

1. Proteins in solution absorb ultraviolet light with absorbance maxima at 280 and 200 nm. Amino acids with aromatic rings are the primary reason for the absorbance peak at 280 nm. Peptide bonds are primarily responsible for the peak at 200 nm.
2. Aromatic amino acids tyrosine and tryptophan give proteins their characteristic ultraviolet (UV) absorption at 280 nm, which is routinely used to estimate protein concentration. Phenylalanine and disulfide bonds also contribute to absorption at 280 nm, albeit slightly.

Pineapple is a short-stemmed herbaceous plant that necessitates a significant amount of planting material. For example, depending on the intensity of planting and the cultivar used, one hectare of cultivation needs 35,000 to 70,000 planting parts. Realizing the need for quick multiplication, Ma (1968) devised a method for quick pineapple multiplication using the decapitation technique. Later a technique for rapid in vitro propagation has been developed. Since then, numerous reports on crop micro-propagation using tissue culture techniques have been published. On supplemented MS medium, different types of explants, such as leaf base, shoot base, excised lateral buds and tips from crowns, young-leaf segments, and excised leaf buds, have been used to regenerate plants. Plantlets raised in this manner thrived in the field. In vitro mutation may also be induced using tissue culture techniques. Shoot tips from in vitro grown plantlets may be treated with chemical mutagens (EMS) or irradiated with gamma rays to produce mutants with superior traits such as spineless leaves, larger fruits, improved pulp consistency, or disease resistance. Similarly, somaclonal variants can be screened out early to improve f ield results.

Sexual Propagation in Pineapple

Pineapple occupy a gametophytic self-incompatibility system so that commercial cultivated pineapple rarely produces very few seeds in the field (Coppens d’Eeckenbrugge et al. 1992). However, if two varieties are grown close together and flowering time is same, it is chance for insect-aided crosspollination to set seeds. The vectors for natural cross-pollination vary with the location. Where humming birds are present, they are likely to be a primary pollinator. Where these birds are absent, honeybees and ants would be the main pollinators. The small corolla tube and the fact that pollen is not shed rule out wind as a pollinator. Since seedy fruit is not acceptable for either fresh or processing, it is rare to find more than one cultivar on large plantations. If more than one cultivaris grown in a farm, spatial separation and careful management of time of forcing will prevent seed production. However, cross-pollination between cultivars is used by pineapple breeders to generate new hybrids like “MD-2” and “CO-2” (Williams and Fleisch 1993). Sexual propagation is important for the generation of new varieties and is successfully used in pineapple breeding programs (Reinhardt et al., 2018). Pineapple Seeds are placed in shallow trays on moistened sand beds under controlled environmental conditions for germination(Junghans et al., 2015).Seed germination come up mostly from two weeks after sowing and rates are high, usually 80% or more (Chang et al., 2003). The new growing seedlings have 6 to 8 leaves stage within about three months after sowing and are then transplanted to pots with agricultural substrate and are grown under greenhouse or screen house conditions. After an additional 9 to 15 months of growth stage, during which the seedlings height reach 25 cm, which is considered adequate for planting in the field, the plants are finally acclimatized in an open nursery.

Post-Harvest Losses

A post-harvest loss is defined as the measurable qualitative and quantitative food (including fruits and vegetables) loss along the supply chain, starting at the time of harvest till its consumption or other end uses (Hodges et al., 2011). Pineapple fruits are highly perishable in nature and continuously respired even after harvesting which limited its shelf-life leading to the storage problems (Hossain and Bepary, 2015) and decline in production due to post-harvest losses (Babalola et al., 2008). During the storage for distant marketing, pineapple fruits easily losses its moisture content through transpiration and become more susceptibility to microbial spoilage (Hossain and Bepary, 2015). In India the top five leading pineapple producing states are West Bengal, Assam, Karnataka, Meghalaya and Manipur (Anonymous, 2018). The measurable qualitative and quantitative losses of pineapple at post-harvest level are from the various stages of handling from the farm level up to the consumers (Table 1 and 2).